OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /or1k/trunk/gdb-5.0/etc
    from Rev 105 to Rev 1765
    ↔ Reverse comparison
  •

Rev 105 → Rev 1765

/make-stds.texi
0,0 → 1,914
@comment This file is included by both standards.texi and make.texinfo.
@comment It was broken out of standards.texi on 1/6/93 by roland.
 
@node Makefile Conventions
@chapter Makefile Conventions
@comment standards.texi does not print an index, but make.texinfo does.
@cindex makefile, conventions for
@cindex conventions for makefiles
@cindex standards for makefiles
 
This
@ifinfo
node
@end ifinfo
@iftex
@ifset CODESTD
section
@end ifset
@ifclear CODESTD
chapter
@end ifclear
@end iftex
describes conventions for writing the Makefiles for GNU programs.
 
@menu
* Makefile Basics:: General Conventions for Makefiles
* Utilities in Makefiles:: Utilities in Makefiles
* Command Variables:: Variables for Specifying Commands
* Directory Variables:: Variables for Installation Directories
* Standard Targets:: Standard Targets for Users
* Install Command Categories:: Three categories of commands in the `install'
rule: normal, pre-install and post-install.
@end menu
 
@node Makefile Basics
@section General Conventions for Makefiles
 
Every Makefile should contain this line:
 
@example
SHELL = /bin/sh
@end example
 
@noindent
to avoid trouble on systems where the @code{SHELL} variable might be
inherited from the environment. (This is never a problem with GNU
@code{make}.)
 
Different @code{make} programs have incompatible suffix lists and
implicit rules, and this sometimes creates confusion or misbehavior. So
it is a good idea to set the suffix list explicitly using only the
suffixes you need in the particular Makefile, like this:
 
@example
.SUFFIXES:
.SUFFIXES: .c .o
@end example
 
@noindent
The first line clears out the suffix list, the second introduces all
suffixes which may be subject to implicit rules in this Makefile.
 
Don't assume that @file{.} is in the path for command execution. When
you need to run programs that are a part of your package during the
make, please make sure that it uses @file{./} if the program is built as
part of the make or @file{$(srcdir)/} if the file is an unchanging part
of the source code. Without one of these prefixes, the current search
path is used.
 
The distinction between @file{./} (the @dfn{build directory}) and
@file{$(srcdir)/} (the @dfn{source directory}) is important because
users can build in a separate directory using the @samp{--srcdir} option
to @file{configure}. A rule of the form:
 
@smallexample
foo.1 : foo.man sedscript
sed -e sedscript foo.man > foo.1
@end smallexample
 
@noindent
will fail when the build directory is not the source directory, because
@file{foo.man} and @file{sedscript} are in the the source directory.
 
When using GNU @code{make}, relying on @samp{VPATH} to find the source
file will work in the case where there is a single dependency file,
since the @code{make} automatic variable @samp{$<} will represent the
source file wherever it is. (Many versions of @code{make} set @samp{$<}
only in implicit rules.) A Makefile target like
 
@smallexample
foo.o : bar.c
$(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
@end smallexample
 
@noindent
should instead be written as
 
@smallexample
foo.o : bar.c
$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@
@end smallexample
 
@noindent
in order to allow @samp{VPATH} to work correctly. When the target has
multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest
way to make the rule work well. For example, the target above for
@file{foo.1} is best written as:
 
@smallexample
foo.1 : foo.man sedscript
sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@@
@end smallexample
 
GNU distributions usually contain some files which are not source
files---for example, Info files, and the output from Autoconf, Automake,
Bison or Flex. Since these files normally appear in the source
directory, they should always appear in the source directory, not in the
build directory. So Makefile rules to update them should put the
updated files in the source directory.
 
However, if a file does not appear in the distribution, then the
Makefile should not put it in the source directory, because building a
program in ordinary circumstances should not modify the source directory
in any way.
 
Try to make the build and installation targets, at least (and all their
subtargets) work correctly with a parallel @code{make}.
 
@node Utilities in Makefiles
@section Utilities in Makefiles
 
Write the Makefile commands (and any shell scripts, such as
@code{configure}) to run in @code{sh}, not in @code{csh}. Don't use any
special features of @code{ksh} or @code{bash}.
 
The @code{configure} script and the Makefile rules for building and
installation should not use any utilities directly except these:
 
@c dd find
@c gunzip gzip md5sum
@c mkfifo mknod tee uname
 
@example
cat cmp cp diff echo egrep expr false grep install-info
ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true
@end example
 
The compression program @code{gzip} can be used in the @code{dist} rule.
 
Stick to the generally supported options for these programs. For
example, don't use @samp{mkdir -p}, convenient as it may be, because
most systems don't support it.
 
It is a good idea to avoid creating symbolic links in makefiles, since a
few systems don't support them.
 
The Makefile rules for building and installation can also use compilers
and related programs, but should do so via @code{make} variables so that the
user can substitute alternatives. Here are some of the programs we
mean:
 
@example
ar bison cc flex install ld ldconfig lex
make makeinfo ranlib texi2dvi yacc
@end example
 
Use the following @code{make} variables to run those programs:
 
@example
$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
@end example
 
When you use @code{ranlib} or @code{ldconfig}, you should make sure
nothing bad happens if the system does not have the program in question.
Arrange to ignore an error from that command, and print a message before
the command to tell the user that failure of this command does not mean
a problem. (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
this.)
 
If you use symbolic links, you should implement a fallback for systems
that don't have symbolic links.
 
Additional utilities that can be used via Make variables are:
 
@example
chgrp chmod chown mknod
@end example
 
It is ok to use other utilities in Makefile portions (or scripts)
intended only for particular systems where you know those utilities
exist.
 
@node Command Variables
@section Variables for Specifying Commands
 
Makefiles should provide variables for overriding certain commands, options,
and so on.
 
In particular, you should run most utility programs via variables.
Thus, if you use Bison, have a variable named @code{BISON} whose default
value is set with @samp{BISON = bison}, and refer to it with
@code{$(BISON)} whenever you need to use Bison.
 
File management utilities such as @code{ln}, @code{rm}, @code{mv}, and
so on, need not be referred to through variables in this way, since users
don't need to replace them with other programs.
 
Each program-name variable should come with an options variable that is
used to supply options to the program. Append @samp{FLAGS} to the
program-name variable name to get the options variable name---for
example, @code{BISONFLAGS}. (The names @code{CFLAGS} for the C
compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
exceptions to this rule, but we keep them because they are standard.)
Use @code{CPPFLAGS} in any compilation command that runs the
preprocessor, and use @code{LDFLAGS} in any compilation command that
does linking as well as in any direct use of @code{ld}.
 
If there are C compiler options that @emph{must} be used for proper
compilation of certain files, do not include them in @code{CFLAGS}.
Users expect to be able to specify @code{CFLAGS} freely themselves.
Instead, arrange to pass the necessary options to the C compiler
independently of @code{CFLAGS}, by writing them explicitly in the
compilation commands or by defining an implicit rule, like this:
 
@smallexample
CFLAGS = -g
ALL_CFLAGS = -I. $(CFLAGS)
.c.o:
$(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
@end smallexample
 
Do include the @samp{-g} option in @code{CFLAGS}, because that is not
@emph{required} for proper compilation. You can consider it a default
that is only recommended. If the package is set up so that it is
compiled with GCC by default, then you might as well include @samp{-O}
in the default value of @code{CFLAGS} as well.
 
Put @code{CFLAGS} last in the compilation command, after other variables
containing compiler options, so the user can use @code{CFLAGS} to
override the others.
 
@code{CFLAGS} should be used in every invocation of the C compiler,
both those which do compilation and those which do linking.
 
Every Makefile should define the variable @code{INSTALL}, which is the
basic command for installing a file into the system.
 
Every Makefile should also define the variables @code{INSTALL_PROGRAM}
and @code{INSTALL_DATA}. (The default for each of these should be
@code{$(INSTALL)}.) Then it should use those variables as the commands
for actual installation, for executables and nonexecutables
respectively. Use these variables as follows:
 
@example
$(INSTALL_PROGRAM) foo $(bindir)/foo
$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
@end example
 
Optionally, you may prepend the value of @code{DESTDIR} to the target
filename. Doing this allows the installer to create a snapshot of the
installation to be copied onto the real target filesystem later. Do not
set the value of @code{DESTDIR} in your Makefile, and do not include it
in any installed files. With support for @code{DESTDIR}, the above
examples become:
 
@example
$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
@end example
 
@noindent
Always use a file name, not a directory name, as the second argument of
the installation commands. Use a separate command for each file to be
installed.
 
@node Directory Variables
@section Variables for Installation Directories
 
Installation directories should always be named by variables, so it is
easy to install in a nonstandard place. The standard names for these
variables are described below. They are based on a standard filesystem
layout; variants of it are used in SVR4, 4.4BSD, Linux, Ultrix v4, and
other modern operating systems.
 
These two variables set the root for the installation. All the other
installation directories should be subdirectories of one of these two,
and nothing should be directly installed into these two directories.
 
@table @samp
@item prefix
A prefix used in constructing the default values of the variables listed
below. The default value of @code{prefix} should be @file{/usr/local}.
When building the complete GNU system, the prefix will be empty and
@file{/usr} will be a symbolic link to @file{/}.
(If you are using Autoconf, write it as @samp{@@prefix@@}.)
 
Running @samp{make install} with a different value of @code{prefix}
from the one used to build the program should @var{not} recompile
the program.
 
@item exec_prefix
A prefix used in constructing the default values of some of the
variables listed below. The default value of @code{exec_prefix} should
be @code{$(prefix)}.
(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
 
Generally, @code{$(exec_prefix)} is used for directories that contain
machine-specific files (such as executables and subroutine libraries),
while @code{$(prefix)} is used directly for other directories.
 
Running @samp{make install} with a different value of @code{exec_prefix}
from the one used to build the program should @var{not} recompile the
program.
@end table
 
Executable programs are installed in one of the following directories.
 
@table @samp
@item bindir
The directory for installing executable programs that users can run.
This should normally be @file{/usr/local/bin}, but write it as
@file{$(exec_prefix)/bin}.
(If you are using Autoconf, write it as @samp{@@bindir@@}.)
 
@item sbindir
The directory for installing executable programs that can be run from
the shell, but are only generally useful to system administrators. This
should normally be @file{/usr/local/sbin}, but write it as
@file{$(exec_prefix)/sbin}.
(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
 
@item libexecdir
@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
The directory for installing executable programs to be run by other
programs rather than by users. This directory should normally be
@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
@end table
 
Data files used by the program during its execution are divided into
categories in two ways.
 
@itemize @bullet
@item
Some files are normally modified by programs; others are never normally
modified (though users may edit some of these).
 
@item
Some files are architecture-independent and can be shared by all
machines at a site; some are architecture-dependent and can be shared
only by machines of the same kind and operating system; others may never
be shared between two machines.
@end itemize
 
This makes for six different possibilities. However, we want to
discourage the use of architecture-dependent files, aside from object
files and libraries. It is much cleaner to make other data files
architecture-independent, and it is generally not hard.
 
Therefore, here are the variables Makefiles should use to specify
directories:
 
@table @samp
@item datadir
The directory for installing read-only architecture independent data
files. This should normally be @file{/usr/local/share}, but write it as
@file{$(prefix)/share}.
(If you are using Autoconf, write it as @samp{@@datadir@@}.)
As a special exception, see @file{$(infodir)}
and @file{$(includedir)} below.
 
@item sysconfdir
The directory for installing read-only data files that pertain to a
single machine--that is to say, files for configuring a host. Mailer
and network configuration files, @file{/etc/passwd}, and so forth belong
here. All the files in this directory should be ordinary ASCII text
files. This directory should normally be @file{/usr/local/etc}, but
write it as @file{$(prefix)/etc}.
(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
 
Do not install executables here in this directory (they probably belong
in @file{$(libexecdir)} or @file{$(sbindir)}). Also do not install
files that are modified in the normal course of their use (programs
whose purpose is to change the configuration of the system excluded).
Those probably belong in @file{$(localstatedir)}.
 
@item sharedstatedir
The directory for installing architecture-independent data files which
the programs modify while they run. This should normally be
@file{/usr/local/com}, but write it as @file{$(prefix)/com}.
(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
 
@item localstatedir
The directory for installing data files which the programs modify while
they run, and that pertain to one specific machine. Users should never
need to modify files in this directory to configure the package's
operation; put such configuration information in separate files that go
in @file{$(datadir)} or @file{$(sysconfdir)}. @file{$(localstatedir)}
should normally be @file{/usr/local/var}, but write it as
@file{$(prefix)/var}.
(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
 
@item libdir
The directory for object files and libraries of object code. Do not
install executables here, they probably ought to go in @file{$(libexecdir)}
instead. The value of @code{libdir} should normally be
@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
(If you are using Autoconf, write it as @samp{@@libdir@@}.)
 
@item infodir
The directory for installing the Info files for this package. By
default, it should be @file{/usr/local/info}, but it should be written
as @file{$(prefix)/info}.
(If you are using Autoconf, write it as @samp{@@infodir@@}.)
 
@item lispdir
The directory for installing any Emacs Lisp files in this package. By
default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
should be written as @file{$(prefix)/share/emacs/site-lisp}.
 
If you are using Autoconf, write the default as @samp{@@lispdir@@}.
In order to make @samp{@@lispdir@@} work, you need the following lines
in your @file{configure.in} file:
 
@example
lispdir='$@{datadir@}/emacs/site-lisp'
AC_SUBST(lispdir)
@end example
 
@item includedir
@c rewritten to avoid overfull hbox --roland
The directory for installing header files to be included by user
programs with the C @samp{#include} preprocessor directive. This
should normally be @file{/usr/local/include}, but write it as
@file{$(prefix)/include}.
(If you are using Autoconf, write it as @samp{@@includedir@@}.)
 
Most compilers other than GCC do not look for header files in directory
@file{/usr/local/include}. So installing the header files this way is
only useful with GCC. Sometimes this is not a problem because some
libraries are only really intended to work with GCC. But some libraries
are intended to work with other compilers. They should install their
header files in two places, one specified by @code{includedir} and one
specified by @code{oldincludedir}.
 
@item oldincludedir
The directory for installing @samp{#include} header files for use with
compilers other than GCC. This should normally be @file{/usr/include}.
(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
 
The Makefile commands should check whether the value of
@code{oldincludedir} is empty. If it is, they should not try to use
it; they should cancel the second installation of the header files.
 
A package should not replace an existing header in this directory unless
the header came from the same package. Thus, if your Foo package
provides a header file @file{foo.h}, then it should install the header
file in the @code{oldincludedir} directory if either (1) there is no
@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo
package.
 
To tell whether @file{foo.h} came from the Foo package, put a magic
string in the file---part of a comment---and @code{grep} for that string.
@end table
 
Unix-style man pages are installed in one of the following:
 
@table @samp
@item mandir
The top-level directory for installing the man pages (if any) for this
package. It will normally be @file{/usr/local/man}, but you should
write it as @file{$(prefix)/man}.
(If you are using Autoconf, write it as @samp{@@mandir@@}.)
 
@item man1dir
The directory for installing section 1 man pages. Write it as
@file{$(mandir)/man1}.
@item man2dir
The directory for installing section 2 man pages. Write it as
@file{$(mandir)/man2}
@item @dots{}
 
@strong{Don't make the primary documentation for any GNU software be a
man page. Write a manual in Texinfo instead. Man pages are just for
the sake of people running GNU software on Unix, which is a secondary
application only.}
 
@item manext
The file name extension for the installed man page. This should contain
a period followed by the appropriate digit; it should normally be @samp{.1}.
 
@item man1ext
The file name extension for installed section 1 man pages.
@item man2ext
The file name extension for installed section 2 man pages.
@item @dots{}
Use these names instead of @samp{manext} if the package needs to install man
pages in more than one section of the manual.
@end table
 
And finally, you should set the following variable:
 
@table @samp
@item srcdir
The directory for the sources being compiled. The value of this
variable is normally inserted by the @code{configure} shell script.
(If you are using Autconf, use @samp{srcdir = @@srcdir@@}.)
@end table
 
For example:
 
@smallexample
@c I have changed some of the comments here slightly to fix an overfull
@c hbox, so the make manual can format correctly. --roland
# Common prefix for installation directories.
# NOTE: This directory must exist when you start the install.
prefix = /usr/local
exec_prefix = $(prefix)
# Where to put the executable for the command `gcc'.
bindir = $(exec_prefix)/bin
# Where to put the directories used by the compiler.
libexecdir = $(exec_prefix)/libexec
# Where to put the Info files.
infodir = $(prefix)/info
@end smallexample
 
If your program installs a large number of files into one of the
standard user-specified directories, it might be useful to group them
into a subdirectory particular to that program. If you do this, you
should write the @code{install} rule to create these subdirectories.
 
Do not expect the user to include the subdirectory name in the value of
any of the variables listed above. The idea of having a uniform set of
variable names for installation directories is to enable the user to
specify the exact same values for several different GNU packages. In
order for this to be useful, all the packages must be designed so that
they will work sensibly when the user does so.
 
@node Standard Targets
@section Standard Targets for Users
 
All GNU programs should have the following targets in their Makefiles:
 
@table @samp
@item all
Compile the entire program. This should be the default target. This
target need not rebuild any documentation files; Info files should
normally be included in the distribution, and DVI files should be made
only when explicitly asked for.
 
By default, the Make rules should compile and link with @samp{-g}, so
that executable programs have debugging symbols. Users who don't mind
being helpless can strip the executables later if they wish.
 
@item install
Compile the program and copy the executables, libraries, and so on to
the file names where they should reside for actual use. If there is a
simple test to verify that a program is properly installed, this target
should run that test.
 
Do not strip executables when installing them. Devil-may-care users can
use the @code{install-strip} target to do that.
 
If possible, write the @code{install} target rule so that it does not
modify anything in the directory where the program was built, provided
@samp{make all} has just been done. This is convenient for building the
program under one user name and installing it under another.
 
The commands should create all the directories in which files are to be
installed, if they don't already exist. This includes the directories
specified as the values of the variables @code{prefix} and
@code{exec_prefix}, as well as all subdirectories that are needed.
One way to do this is by means of an @code{installdirs} target
as described below.
 
Use @samp{-} before any command for installing a man page, so that
@code{make} will ignore any errors. This is in case there are systems
that don't have the Unix man page documentation system installed.
 
The way to install Info files is to copy them into @file{$(infodir)}
with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
the @code{install-info} program if it is present. @code{install-info}
is a program that edits the Info @file{dir} file to add or update the
menu entry for the given Info file; it is part of the Texinfo package.
Here is a sample rule to install an Info file:
 
@comment This example has been carefully formatted for the Make manual.
@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu.
@smallexample
$(DESTDIR)$(infodir)/foo.info: foo.info
$(POST_INSTALL)
# There may be a newer info file in . than in srcdir.
-if test -f foo.info; then d=.; \
else d=$(srcdir); fi; \
$(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@@; \
# Run install-info only if it exists.
# Use `if' instead of just prepending `-' to the
# line so we notice real errors from install-info.
# We use `$(SHELL) -c' because some shells do not
# fail gracefully when there is an unknown command.
if $(SHELL) -c 'install-info --version' \
>/dev/null 2>&1; then \
install-info --dir-file=$(DESTDIR)$(infodir)/dir \
$(DESTDIR)$(infodir)/foo.info; \
else true; fi
@end smallexample
 
When writing the @code{install} target, you must classify all the
commands into three categories: normal ones, @dfn{pre-installation}
commands and @dfn{post-installation} commands. @xref{Install Command
Categories}.
 
@item uninstall
Delete all the installed files---the copies that the @samp{install}
target creates.
 
This rule should not modify the directories where compilation is done,
only the directories where files are installed.
 
The uninstallation commands are divided into three categories, just like
the installation commands. @xref{Install Command Categories}.
 
@item install-strip
Like @code{install}, but strip the executable files while installing
them. In many cases, the definition of this target can be very simple:
 
@smallexample
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
install
@end smallexample
 
Normally we do not recommend stripping an executable unless you are sure
the program has no bugs. However, it can be reasonable to install a
stripped executable for actual execution while saving the unstripped
executable elsewhere in case there is a bug.
 
@comment The gratuitous blank line here is to make the table look better
@comment in the printed Make manual. Please leave it in.
@item clean
 
Delete all files from the current directory that are normally created by
building the program. Don't delete the files that record the
configuration. Also preserve files that could be made by building, but
normally aren't because the distribution comes with them.
 
Delete @file{.dvi} files here if they are not part of the distribution.
 
@item distclean
Delete all files from the current directory that are created by
configuring or building the program. If you have unpacked the source
and built the program without creating any other files, @samp{make
distclean} should leave only the files that were in the distribution.
 
@item mostlyclean
Like @samp{clean}, but may refrain from deleting a few files that people
normally don't want to recompile. For example, the @samp{mostlyclean}
target for GCC does not delete @file{libgcc.a}, because recompiling it
is rarely necessary and takes a lot of time.
 
@item maintainer-clean
Delete almost everything from the current directory that can be
reconstructed with this Makefile. This typically includes everything
deleted by @code{distclean}, plus more: C source files produced by
Bison, tags tables, Info files, and so on.
 
The reason we say ``almost everything'' is that running the command
@samp{make maintainer-clean} should not delete @file{configure} even if
@file{configure} can be remade using a rule in the Makefile. More generally,
@samp{make maintainer-clean} should not delete anything that needs to
exist in order to run @file{configure} and then begin to build the
program. This is the only exception; @code{maintainer-clean} should
delete everything else that can be rebuilt.
 
The @samp{maintainer-clean} target is intended to be used by a maintainer of
the package, not by ordinary users. You may need special tools to
reconstruct some of the files that @samp{make maintainer-clean} deletes.
Since these files are normally included in the distribution, we don't
take care to make them easy to reconstruct. If you find you need to
unpack the full distribution again, don't blame us.
 
To help make users aware of this, the commands for the special
@code{maintainer-clean} target should start with these two:
 
@smallexample
@@echo 'This command is intended for maintainers to use; it'
@@echo 'deletes files that may need special tools to rebuild.'
@end smallexample
 
@item TAGS
Update a tags table for this program.
@c ADR: how?
 
@item info
Generate any Info files needed. The best way to write the rules is as
follows:
 
@smallexample
info: foo.info
 
foo.info: foo.texi chap1.texi chap2.texi
$(MAKEINFO) $(srcdir)/foo.texi
@end smallexample
 
@noindent
You must define the variable @code{MAKEINFO} in the Makefile. It should
run the @code{makeinfo} program, which is part of the Texinfo
distribution.
 
Normally a GNU distribution comes with Info files, and that means the
Info files are present in the source directory. Therefore, the Make
rule for an info file should update it in the source directory. When
users build the package, ordinarily Make will not update the Info files
because they will already be up to date.
 
@item dvi
Generate DVI files for all Texinfo documentation.
For example:
 
@smallexample
dvi: foo.dvi
 
foo.dvi: foo.texi chap1.texi chap2.texi
$(TEXI2DVI) $(srcdir)/foo.texi
@end smallexample
 
@noindent
You must define the variable @code{TEXI2DVI} in the Makefile. It should
run the program @code{texi2dvi}, which is part of the Texinfo
distribution.@footnote{@code{texi2dvi} uses @TeX{} to do the real work
of formatting. @TeX{} is not distributed with Texinfo.} Alternatively,
write just the dependencies, and allow GNU @code{make} to provide the command.
 
@item dist
Create a distribution tar file for this program. The tar file should be
set up so that the file names in the tar file start with a subdirectory
name which is the name of the package it is a distribution for. This
name can include the version number.
 
For example, the distribution tar file of GCC version 1.40 unpacks into
a subdirectory named @file{gcc-1.40}.
 
The easiest way to do this is to create a subdirectory appropriately
named, use @code{ln} or @code{cp} to install the proper files in it, and
then @code{tar} that subdirectory.
 
Compress the tar file file with @code{gzip}. For example, the actual
distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
 
The @code{dist} target should explicitly depend on all non-source files
that are in the distribution, to make sure they are up to date in the
distribution.
@ifset CODESTD
@xref{Releases, , Making Releases}.
@end ifset
@ifclear CODESTD
@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
@end ifclear
 
@item check
Perform self-tests (if any). The user must build the program before
running the tests, but need not install the program; you should write
the self-tests so that they work when the program is built but not
installed.
@end table
 
The following targets are suggested as conventional names, for programs
in which they are useful.
 
@table @code
@item installcheck
Perform installation tests (if any). The user must build and install
the program before running the tests. You should not assume that
@file{$(bindir)} is in the search path.
 
@item installdirs
It's useful to add a target named @samp{installdirs} to create the
directories where files are installed, and their parent directories.
There is a script called @file{mkinstalldirs} which is convenient for
this; you can find it in the Texinfo package.
@c It's in /gd/gnu/lib/mkinstalldirs.
You can use a rule like this:
 
@comment This has been carefully formatted to look decent in the Make manual.
@comment Please be sure not to make it extend any further to the right.--roland
@smallexample
# Make sure all installation directories (e.g. $(bindir))
# actually exist by making them if necessary.
installdirs: mkinstalldirs
$(srcdir)/mkinstalldirs $(bindir) $(datadir) \
$(libdir) $(infodir) \
$(mandir)
@end smallexample
 
This rule should not modify the directories where compilation is done.
It should do nothing but create installation directories.
@end table
 
@node Install Command Categories
@section Install Command Categories
 
@cindex pre-installation commands
@cindex post-installation commands
When writing the @code{install} target, you must classify all the
commands into three categories: normal ones, @dfn{pre-installation}
commands and @dfn{post-installation} commands.
 
Normal commands move files into their proper places, and set their
modes. They may not alter any files except the ones that come entirely
from the package they belong to.
 
Pre-installation and post-installation commands may alter other files;
in particular, they can edit global configuration files or data bases.
 
Pre-installation commands are typically executed before the normal
commands, and post-installation commands are typically run after the
normal commands.
 
The most common use for a post-installation command is to run
@code{install-info}. This cannot be done with a normal command, since
it alters a file (the Info directory) which does not come entirely and
solely from the package being installed. It is a post-installation
command because it needs to be done after the normal command which
installs the package's Info files.
 
Most programs don't need any pre-installation commands, but we have the
feature just in case it is needed.
 
To classify the commands in the @code{install} rule into these three
categories, insert @dfn{category lines} among them. A category line
specifies the category for the commands that follow.
 
A category line consists of a tab and a reference to a special Make
variable, plus an optional comment at the end. There are three
variables you can use, one for each category; the variable name
specifies the category. Category lines are no-ops in ordinary execution
because these three Make variables are normally undefined (and you
@emph{should not} define them in the makefile).
 
Here are the three possible category lines, each with a comment that
explains what it means:
 
@smallexample
$(PRE_INSTALL) # @r{Pre-install commands follow.}
$(POST_INSTALL) # @r{Post-install commands follow.}
$(NORMAL_INSTALL) # @r{Normal commands follow.}
@end smallexample
 
If you don't use a category line at the beginning of the @code{install}
rule, all the commands are classified as normal until the first category
line. If you don't use any category lines, all the commands are
classified as normal.
 
These are the category lines for @code{uninstall}:
 
@smallexample
$(PRE_UNINSTALL) # @r{Pre-uninstall commands follow.}
$(POST_UNINSTALL) # @r{Post-uninstall commands follow.}
$(NORMAL_UNINSTALL) # @r{Normal commands follow.}
@end smallexample
 
Typically, a pre-uninstall command would be used for deleting entries
from the Info directory.
 
If the @code{install} or @code{uninstall} target has any dependencies
which act as subroutines of installation, then you should start
@emph{each} dependency's commands with a category line, and start the
main target's commands with a category line also. This way, you can
ensure that each command is placed in the right category regardless of
which of the dependencies actually run.
 
Pre-installation and post-installation commands should not run any
programs except for these:
 
@example
[ basename bash cat chgrp chmod chown cmp cp dd diff echo
egrep expand expr false fgrep find getopt grep gunzip gzip
hostname install install-info kill ldconfig ln ls md5sum
mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
test touch true uname xargs yes
@end example
 
@cindex binary packages
The reason for distinguishing the commands in this way is for the sake
of making binary packages. Typically a binary package contains all the
executables and other files that need to be installed, and has its own
method of installing them---so it does not need to run the normal
installation commands. But installing the binary package does need to
execute the pre-installation and post-installation commands.
 
Programs to build binary packages work by extracting the
pre-installation and post-installation commands. Here is one way of
extracting the pre-installation commands:
 
@smallexample
make -n install -o all \
PRE_INSTALL=pre-install \
POST_INSTALL=post-install \
NORMAL_INSTALL=normal-install \
| gawk -f pre-install.awk
@end smallexample
 
@noindent
where the file @file{pre-install.awk} could contain this:
 
@smallexample
$0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ @{on = 0@}
on @{print $0@}
$0 ~ /^\t[ \t]*pre_install[ \t]*$/ @{on = 1@}
@end smallexample
 
The resulting file of pre-installation commands is executed as a shell
script as part of installing the binary package.
/configure
0,0 → 1,862
#! /bin/sh
 
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.12.1
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
 
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
 
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
 
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
 
ac_prev=
for ac_option
do
 
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
 
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
 
# Accept the important Cygnus configure options, so we can diagnose typos.
 
case "$ac_option" in
 
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
 
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
 
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
 
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
 
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
 
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
 
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
 
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
 
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
 
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
 
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
 
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
 
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
 
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
 
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
 
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
 
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
 
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
 
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
 
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
 
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
 
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
 
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
 
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
 
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
 
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
 
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
 
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
 
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
 
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
 
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
 
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
 
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.12.1"
exit 0 ;;
 
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
 
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
 
--x)
# Obsolete; use --with-x.
with_x=yes ;;
 
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
 
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
 
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
 
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
 
esac
done
 
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
 
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
 
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
 
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
 
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
 
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=Makefile.in
 
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
 
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
 
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
 
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
 
 
 
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:555: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
 
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
 
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set) 2>&1 | grep ac_space` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
 
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
 
 
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
 
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
 
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
 
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
 
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
 
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
 
CEOF
EOF
 
cat >> $CONFIG_STATUS <<\EOF
 
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
 
cat >> $CONFIG_STATUS <<EOF
 
CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
 
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
 
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
 
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
 
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
 
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
 
EOF
cat >> $CONFIG_STATUS <<EOF
 
EOF
cat >> $CONFIG_STATUS <<\EOF
 
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
configure Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: Makefile.in =================================================================== --- Makefile.in (nonexistent) +++ Makefile.in (revision 1765) @@ -0,0 +1,156 @@ +# +# Makefile.in for etc +# + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +srcdir = @srcdir@ +VPATH = @srcdir@ + +bindir = @bindir@ +libdir = @libdir@ +tooldir = $(libdir) +datadir = @datadir@ + +mandir = @mandir@ +man1dir = $(mandir)/man1 +man2dir = $(mandir)/man2 +man3dir = $(mandir)/man3 +man4dir = $(mandir)/man4 +man5dir = $(mandir)/man5 +man6dir = $(mandir)/man6 +man7dir = $(mandir)/man7 +man8dir = $(mandir)/man8 +man9dir = $(mandir)/man9 +infodir = @infodir@ + +SHELL = /bin/sh + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +MAKEINFO = `if [ -f ../texinfo/makeinfo/makeinfo ]; \ + then echo ../texinfo/makeinfo/makeinfo; \ + else echo makeinfo; fi` +TEXI2DVI = `if [ -f ../texinfo/util/texi2dvi ]; \ + then echo ../texinfo/util/texi2dvi; \ + else echo texi2dvi; fi` +TEXI2HTML = texi2html +DVIPS = dvips + +# Where to find texinfo.tex to format documentation with TeX. +TEXIDIR = $(srcdir)/../texinfo + +#### Host, target, and site specific Makefile fragments come in here. +### + +INFOFILES = standards.info configure.info +DVIFILES = standards.dvi configure.dvi + +all: + +install: + +uninstall: + +info: + for f in $(INFOFILES); do \ + if test -f $(srcdir)/`echo $$f | sed -e 's/.info$$/.texi/'`; then \ + if $(MAKE) "MAKEINFO=$(MAKEINFO)" $$f; then \ + true; \ + else \ + exit 1; \ + fi; \ + fi; \ + done + +install-info: info + $(SHELL) $(srcdir)/../mkinstalldirs $(infodir) + if test ! -f standards.info; then cd $(srcdir); fi; \ + if test -f standards.info; then \ + for i in standards.info*; do \ + $(INSTALL_DATA) $$i $(infodir)/$$i; \ + done; \ + fi + if test ! -f configure.info; then cd $(srcdir); fi; \ + if test -f configure.info; then \ + for i in configure.info*; do \ + $(INSTALL_DATA) $$i $(infodir)/$$i; \ + done; \ + fi + +dvi: + for f in $(DVIFILES); do \ + if test -f $(srcdir)/`echo $$f | sed -e 's/.dvi$$/.texi/'`; then \ + if $(MAKE) "TEXI2DVI=$(TEXI2DVI)" $$f; then \ + true; \ + else \ + exit 1; \ + fi; \ + fi; \ + done + +standards.info: $(srcdir)/standards.texi $(srcdir)/make-stds.texi + $(MAKEINFO) --no-split -I$(srcdir) -o standards.info $(srcdir)/standards.texi + +standards.dvi: $(srcdir)/standards.texi + TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/standards.texi + +standards.ps: standards.dvi + $(DVIPS) standards.dvi -o standards.ps + +# makeinfo requires images to be in the current directory. +configure.info: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin + rm -f configdev.txt configbuild.txt + cp $(srcdir)/configdev.tin configdev.txt + cp $(srcdir)/configbuild.tin configbuild.txt + $(MAKEINFO) -I$(srcdir) -o configure.info $(srcdir)/configure.texi + rm -f configdev.txt configbuild.txt + +# texi2dvi wants both the .txt and the .eps files. +configure.dvi: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin $(srcdir)/configdev.ein $(srcdir)/configbuild.ein + rm -f configdev.txt configbuild.txt + cp $(srcdir)/configdev.tin configdev.txt + cp $(srcdir)/configbuild.tin configbuild.txt + rm -f configdev.eps configbuild.eps + cp $(srcdir)/configdev.ein configdev.eps + cp $(srcdir)/configbuild.ein configbuild.eps + TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/configure.texi + rm -f configdev.txt configbuild.txt + rm -f configdev.eps configbuild.eps + +# dvips requires images to be in the current directory +configure.ps: configure.dvi $(srcdir)/configdev.ein $(srcdir)/configbuild.ein + rm -f configdev.eps configbuild.eps + cp $(srcdir)/configdev.ein configdev.eps + cp $(srcdir)/configbuild.ein configbuild.eps + $(DVIPS) configure.dvi -o configure.ps + rm -f configdev.eps configbuild.eps + +configure.html: $(srcdir)/configure.texi + $(TEXI2HTML) -split_chapter $(srcdir)/configure.texi + +clean: + rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log + rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs + rm -f configdev.txt configbuild.txt configdev.eps configbuild.eps + rm -f configdev.jpg configbuild.jpg + +mostlyclean: clean + +distclean: clean + rm -f Makefile config.status config.cache + +maintainer-clean realclean: distclean + rm -f *.info* + +Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) + $(SHELL) ./config.status + +## these last targets are for standards.texi conformance +dist: +check: +installcheck: +TAGS: Index: configure.in =================================================================== --- configure.in (nonexistent) +++ configure.in (revision 1765) @@ -0,0 +1,7 @@ +dnl Process this file with autoconf to produce a configure script. +AC_PREREQ(2.5) +AC_INIT(Makefile.in) + +AC_PROG_INSTALL + +AC_OUTPUT(Makefile) Index: standards.texi =================================================================== --- standards.texi (nonexistent) +++ standards.texi (revision 1765) @@ -0,0 +1,3093 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename standards.info +@settitle GNU Coding Standards +@c This date is automagically updated when you save this file: +@set lastupdate March 13, 1998 +@c %**end of header + +@ifinfo +@format +START-INFO-DIR-ENTRY +* Standards: (standards). GNU coding standards. +END-INFO-DIR-ENTRY +@end format +@end ifinfo + +@c @setchapternewpage odd +@setchapternewpage off + +@c This is used by a cross ref in make-stds.texi +@set CODESTD 1 +@iftex +@set CHAPTER chapter +@end iftex +@ifinfo +@set CHAPTER node +@end ifinfo + +@ifinfo +GNU Coding Standards +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Free Software Foundation. +@end ifinfo + +@titlepage +@title GNU Coding Standards +@author Richard Stallman +@author last updated @value{lastupdate} +@page + +@vskip 0pt plus 1filll +Copyright @copyright{} 1992, 1993, 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Free Software Foundation. +@end titlepage + +@ifinfo +@node Top, Preface, (dir), (dir) +@top Version + +Last updated @value{lastupdate}. +@end ifinfo + +@menu +* Preface:: About the GNU Coding Standards +* Intellectual Property:: Keeping Free Software Free +* Design Advice:: General Program Design +* Program Behavior:: Program Behavior for All Programs +* Writing C:: Making The Best Use of C +* Documentation:: Documenting Programs +* Managing Releases:: The Release Process +@end menu + +@node Preface +@chapter About the GNU Coding Standards + +The GNU Coding Standards were written by Richard Stallman and other GNU +Project volunteers. Their purpose is to make the GNU system clean, +consistent, and easy to install. This document can also be read as a +guide to writing portable, robust and reliable programs. It focuses on +programs written in C, but many of the rules and principles are useful +even if you write in another programming language. The rules often +state reasons for writing in a certain way. + +Corrections or suggestions for this document should be sent to +@email{gnu@@gnu.org}. If you make a suggestion, please include a +suggested new wording for it; our time is limited. We prefer a context +diff to the @file{standards.texi} or @file{make-stds.texi} files, but if +you don't have those files, please mail your suggestion anyway. + +This release of the GNU Coding Standards was last updated +@value{lastupdate}. + +@node Intellectual Property +@chapter Keeping Free Software Free + +This @value{CHAPTER} discusses how you can make sure that GNU software +remains unencumbered. + +@menu +* Reading Non-Free Code:: Referring to Proprietary Programs +* Contributions:: Accepting Contributions +@end menu + +@node Reading Non-Free Code +@section Referring to Proprietary Programs + +Don't in any circumstances refer to Unix source code for or during +your work on GNU! (Or to any other proprietary programs.) + +If you have a vague recollection of the internals of a Unix program, +this does not absolutely mean you can't write an imitation of it, but +do try to organize the imitation internally along different lines, +because this is likely to make the details of the Unix version +irrelevant and dissimilar to your results. + +For example, Unix utilities were generally optimized to minimize +memory use; if you go for speed instead, your program will be very +different. You could keep the entire input file in core and scan it +there instead of using stdio. Use a smarter algorithm discovered more +recently than the Unix program. Eliminate use of temporary files. Do +it in one pass instead of two (we did this in the assembler). + +Or, on the contrary, emphasize simplicity instead of speed. For some +applications, the speed of today's computers makes simpler algorithms +adequate. + +Or go for generality. For example, Unix programs often have static +tables or fixed-size strings, which make for arbitrary limits; use +dynamic allocation instead. Make sure your program handles NULs and +other funny characters in the input files. Add a programming language +for extensibility and write part of the program in that language. + +Or turn some parts of the program into independently usable libraries. +Or use a simple garbage collector instead of tracking precisely when +to free memory, or use a new GNU facility such as obstacks. + + +@node Contributions +@section Accepting Contributions + +If someone else sends you a piece of code to add to the program you are +working on, we need legal papers to use it---the same sort of legal +papers we will need to get from you. @emph{Each} significant +contributor to a program must sign some sort of legal papers in order +for us to have clear title to the program. The main author alone is not +enough. + +So, before adding in any contributions from other people, please tell +us, so we can arrange to get the papers. Then wait until we tell you +that we have received the signed papers, before you actually use the +contribution. + +This applies both before you release the program and afterward. If +you receive diffs to fix a bug, and they make significant changes, we +need legal papers for that change. + +This also applies to comments and documentation files. For copyright +law, comments and code are just text. Copyright applies to all kinds of +text, so we need legal papers for all kinds. + +You don't need papers for changes of a few lines here or there, since +they are not significant for copyright purposes. Also, you don't need +papers if all you get from the suggestion is some ideas, not actual code +which you use. For example, if you write a different solution to the +problem, you don't need to get papers. + +We know this is frustrating; it's frustrating for us as well. But if +you don't wait, you are going out on a limb---for example, what if the +contributor's employer won't sign a disclaimer? You might have to take +that code out again! + +The very worst thing is if you forget to tell us about the other +contributor. We could be very embarrassed in court some day as a +result. + +We have more detailed advice for maintainers of programs; if you have +reached the stage of actually maintaining a program for GNU (whether +released or not), please ask us for a copy. + +@node Design Advice +@chapter General Program Design + +This @value{CHAPTER} discusses some of the issues you should take into +account when designing your program. + +@menu +* Compatibility:: Compatibility with other implementations +* Using Extensions:: Using non-standard features +* ANSI C:: Using ANSI C features +* Source Language:: Using languages other than C +@end menu + +@node Compatibility +@section Compatibility with Other Implementations + +With occasional exceptions, utility programs and libraries for GNU +should be upward compatible with those in Berkeley Unix, and upward +compatible with @sc{ansi} C if @sc{ansi} C specifies their behavior, and +upward compatible with @sc{POSIX} if @sc{POSIX} specifies their +behavior. + +When these standards conflict, it is useful to offer compatibility +modes for each of them. + +@sc{ansi} C and @sc{POSIX} prohibit many kinds of extensions. Feel free +to make the extensions anyway, and include a @samp{--ansi}, +@samp{--posix}, or @samp{--compatible} option to turn them off. +However, if the extension has a significant chance of breaking any real +programs or scripts, then it is not really upward compatible. Try to +redesign its interface. + +Many GNU programs suppress extensions that conflict with POSIX if the +environment variable @code{POSIXLY_CORRECT} is defined (even if it is +defined with a null value). Please make your program recognize this +variable if appropriate. + +When a feature is used only by users (not by programs or command +files), and it is done poorly in Unix, feel free to replace it +completely with something totally different and better. (For example, +@code{vi} is replaced with Emacs.) But it is nice to offer a compatible +feature as well. (There is a free @code{vi} clone, so we offer it.) + +Additional useful features not in Berkeley Unix are welcome. + +@node Using Extensions +@section Using Non-standard Features + +Many GNU facilities that already exist support a number of convenient +extensions over the comparable Unix facilities. Whether to use these +extensions in implementing your program is a difficult question. + +On the one hand, using the extensions can make a cleaner program. +On the other hand, people will not be able to build the program +unless the other GNU tools are available. This might cause the +program to work on fewer kinds of machines. + +With some extensions, it might be easy to provide both alternatives. +For example, you can define functions with a ``keyword'' @code{INLINE} +and define that as a macro to expand into either @code{inline} or +nothing, depending on the compiler. + +In general, perhaps it is best not to use the extensions if you can +straightforwardly do without them, but to use the extensions if they +are a big improvement. + +An exception to this rule are the large, established programs (such as +Emacs) which run on a great variety of systems. Such programs would +be broken by use of GNU extensions. + +Another exception is for programs that are used as part of +compilation: anything that must be compiled with other compilers in +order to bootstrap the GNU compilation facilities. If these require +the GNU compiler, then no one can compile them without having them +installed already. That would be no good. + +@node ANSI C +@section @sc{ansi} C and pre-@sc{ansi} C + +Do not ever use the ``trigraph'' feature of @sc{ansi} C. + +@sc{ansi} C is widespread enough now that it is ok to write new programs +that use @sc{ansi} C features (and therefore will not work in +non-@sc{ansi} compilers). And if a program is already written in +@sc{ansi} C, there's no need to convert it to support non-@sc{ansi} +compilers. + +However, it is easy to support non-@sc{ansi} compilers in most programs, +so you might still consider doing so when you write a program. Instead +of writing function definitions in @sc{ansi} prototype form, + +@example +int +foo (int x, int y) +@dots{} +@end example + +@noindent +write the definition in pre-@sc{ansi} style like this, + +@example +int +foo (x, y) + int x, y; +@dots{} +@end example + +@noindent +and use a separate declaration to specify the argument prototype: + +@example +int foo (int, int); +@end example + +You need such a declaration anyway, in a header file, to get the benefit +of @sc{ansi} C prototypes in all the files where the function is called. +And once you have it, you lose nothing by writing the function +definition in the pre-@sc{ansi} style. + +If you don't know non-@sc{ansi} C, there's no need to learn it; just +write in @sc{ansi} C. + +@node Source Language +@section Using Languages Other Than C + +Using a language other than C is like using a non-standard feature: it +will cause trouble for users. Even if GCC supports the other language, +users may find it inconvenient to have to install the compiler for that +other language in order to build your program. For example, if you +write your program in C++, people will have to install the C++ compiler +in order to compile your program. Thus, it is better if you write in C. + +But there are three situations when there is no disadvantage in using +some other language: + +@itemize @bullet +@item +It is okay to use another language if your program contains an +interpreter for that language. + +For example, if your program links with GUILE, it is ok to write part of +the program in Scheme or another language supported by GUILE. + +@item +It is okay to use another language in a tool specifically intended for +use with that language. + +This is okay because the only people who want to build the tool will be +those who have installed the other language anyway. + +@item +If an application is of interest to a narrow community, then perhaps +it's not important if the application is inconvenient to install. +@end itemize + +C has one other advantage over C++ and other compiled languages: more +people know C, so more people will find it easy to read and modify the +program if it is written in C. + +@node Program Behavior +@chapter Program Behavior for All Programs + +This @value{CHAPTER} describes how to write robust software. It also +describes general standards for error messages, the command line interface, +and how libraries should behave. + +@menu +* Semantics:: Writing robust programs +* Libraries:: Library behavior +* Errors:: Formatting error messages +* User Interfaces:: Standards for command line interfaces +* Option Table:: Table of long options. +* Memory Usage:: When and how to care about memory needs +@end menu + +@node Semantics +@section Writing Robust Programs + +Avoid arbitrary limits on the length or number of @emph{any} data +structure, including file names, lines, files, and symbols, by allocating +all data structures dynamically. In most Unix utilities, ``long lines +are silently truncated''. This is not acceptable in a GNU utility. + +Utilities reading files should not drop NUL characters, or any other +nonprinting characters @emph{including those with codes above 0177}. The +only sensible exceptions would be utilities specifically intended for +interface to certain types of printers that can't handle those characters. + +Check every system call for an error return, unless you know you wish to +ignore errors. Include the system error text (from @code{perror} or +equivalent) in @emph{every} error message resulting from a failing +system call, as well as the name of the file if any and the name of the +utility. Just ``cannot open foo.c'' or ``stat failed'' is not +sufficient. + +Check every call to @code{malloc} or @code{realloc} to see if it +returned zero. Check @code{realloc} even if you are making the block +smaller; in a system that rounds block sizes to a power of 2, +@code{realloc} may get a different block if you ask for less space. + +In Unix, @code{realloc} can destroy the storage block if it returns +zero. GNU @code{realloc} does not have this bug: if it fails, the +original block is unchanged. Feel free to assume the bug is fixed. If +you wish to run your program on Unix, and wish to avoid lossage in this +case, you can use the GNU @code{malloc}. + +You must expect @code{free} to alter the contents of the block that was +freed. Anything you want to fetch from the block, you must fetch before +calling @code{free}. + +If @code{malloc} fails in a noninteractive program, make that a fatal +error. In an interactive program (one that reads commands from the +user), it is better to abort the command and return to the command +reader loop. This allows the user to kill other processes to free up +virtual memory, and then try the command again. + +Use @code{getopt_long} to decode arguments, unless the argument syntax +makes this unreasonable. + +When static storage is to be written in during program execution, use +explicit C code to initialize it. Reserve C initialized declarations +for data that will not be changed. +@c ADR: why? + +Try to avoid low-level interfaces to obscure Unix data structures (such +as file directories, utmp, or the layout of kernel memory), since these +are less likely to work compatibly. If you need to find all the files +in a directory, use @code{readdir} or some other high-level interface. +These will be supported compatibly by GNU. + +By default, the GNU system will provide the signal handling functions of +@sc{BSD} and of @sc{POSIX}. So GNU software should be written to use +these. + +In error checks that detect ``impossible'' conditions, just abort. +There is usually no point in printing any message. These checks +indicate the existence of bugs. Whoever wants to fix the bugs will have +to read the source code and run a debugger. So explain the problem with +comments in the source. The relevant data will be in variables, which +are easy to examine with the debugger, so there is no point moving them +elsewhere. + +Do not use a count of errors as the exit status for a program. +@emph{That does not work}, because exit status values are limited to 8 +bits (0 through 255). A single run of the program might have 256 +errors; if you try to return 256 as the exit status, the parent process +will see 0 as the status, and it will appear that the program succeeded. + +If you make temporary files, check the @code{TMPDIR} environment +variable; if that variable is defined, use the specified directory +instead of @file{/tmp}. + +@node Libraries +@section Library Behavior + +Try to make library functions reentrant. If they need to do dynamic +storage allocation, at least try to avoid any nonreentrancy aside from +that of @code{malloc} itself. + +Here are certain name conventions for libraries, to avoid name +conflicts. + +Choose a name prefix for the library, more than two characters long. +All external function and variable names should start with this +prefix. In addition, there should only be one of these in any given +library member. This usually means putting each one in a separate +source file. + +An exception can be made when two external symbols are always used +together, so that no reasonable program could use one without the +other; then they can both go in the same file. + +External symbols that are not documented entry points for the user +should have names beginning with @samp{_}. They should also contain +the chosen name prefix for the library, to prevent collisions with +other libraries. These can go in the same files with user entry +points if you like. + +Static functions and variables can be used as you like and need not +fit any naming convention. + +@node Errors +@section Formatting Error Messages + +Error messages from compilers should look like this: + +@example +@var{source-file-name}:@var{lineno}: @var{message} +@end example + +Error messages from other noninteractive programs should look like this: + +@example +@var{program}:@var{source-file-name}:@var{lineno}: @var{message} +@end example + +@noindent +when there is an appropriate source file, or like this: + +@example +@var{program}: @var{message} +@end example + +@noindent +when there is no relevant source file. + +In an interactive program (one that is reading commands from a +terminal), it is better not to include the program name in an error +message. The place to indicate which program is running is in the +prompt or with the screen layout. (When the same program runs with +input from a source other than a terminal, it is not interactive and +would do best to print error messages using the noninteractive style.) + +The string @var{message} should not begin with a capital letter when +it follows a program name and/or file name. Also, it should not end +with a period. + +Error messages from interactive programs, and other messages such as +usage messages, should start with a capital letter. But they should not +end with a period. + +@node User Interfaces +@section Standards for Command Line Interfaces + +Please don't make the behavior of a utility depend on the name used +to invoke it. It is useful sometimes to make a link to a utility +with a different name, and that should not change what it does. + +Instead, use a run time option or a compilation switch or both +to select among the alternate behaviors. + +Likewise, please don't make the behavior of the program depend on the +type of output device it is used with. Device independence is an +important principle of the system's design; do not compromise it +merely to save someone from typing an option now and then. + +If you think one behavior is most useful when the output is to a +terminal, and another is most useful when the output is a file or a +pipe, then it is usually best to make the default behavior the one that +is useful with output to a terminal, and have an option for the other +behavior. + +Compatibility requires certain programs to depend on the type of output +device. It would be disastrous if @code{ls} or @code{sh} did not do so +in the way all users expect. In some of these cases, we supplement the +program with a preferred alternate version that does not depend on the +output device type. For example, we provide a @code{dir} program much +like @code{ls} except that its default output format is always +multi-column format. + +It is a good idea to follow the @sc{POSIX} guidelines for the +command-line options of a program. The easiest way to do this is to use +@code{getopt} to parse them. Note that the GNU version of @code{getopt} +will normally permit options anywhere among the arguments unless the +special argument @samp{--} is used. This is not what @sc{POSIX} +specifies; it is a GNU extension. + +Please define long-named options that are equivalent to the +single-letter Unix-style options. We hope to make GNU more user +friendly this way. This is easy to do with the GNU function +@code{getopt_long}. + +One of the advantages of long-named options is that they can be +consistent from program to program. For example, users should be able +to expect the ``verbose'' option of any GNU program which has one, to be +spelled precisely @samp{--verbose}. To achieve this uniformity, look at +the table of common long-option names when you choose the option names +for your program (@pxref{Option Table}). + +It is usually a good idea for file names given as ordinary arguments to +be input files only; any output files would be specified using options +(preferably @samp{-o} or @samp{--output}). Even if you allow an output +file name as an ordinary argument for compatibility, try to provide an +option as another way to specify it. This will lead to more consistency +among GNU utilities, and fewer idiosyncracies for users to remember. + +All programs should support two standard options: @samp{--version} +and @samp{--help}. + +@table @code +@item --version +This option should direct the program to information about its name, +version, origin and legal status, all on standard output, and then exit +successfully. Other options and arguments should be ignored once this +is seen, and the program should not perform its normal function. + +The first line is meant to be easy for a program to parse; the version +number proper starts after the last space. In addition, it contains +the canonical name for this program, in this format: + +@example +GNU Emacs 19.30 +@end example + +@noindent +The program's name should be a constant string; @emph{don't} compute it +from @code{argv[0]}. The idea is to state the standard or canonical +name for the program, not its file name. There are other ways to find +out the precise file name where a command is found in @code{PATH}. + +If the program is a subsidiary part of a larger package, mention the +package name in parentheses, like this: + +@example +emacsserver (GNU Emacs) 19.30 +@end example + +@noindent +If the package has a version number which is different from this +program's version number, you can mention the package version number +just before the close-parenthesis. + +If you @strong{need} to mention the version numbers of libraries which +are distributed separately from the package which contains this program, +you can do so by printing an additional line of version info for each +library you want to mention. Use the same format for these lines as for +the first line. + +Please do not mention all of the libraries that the program uses ``just +for completeness''---that would produce a lot of unhelpful clutter. +Please mention library version numbers only if you find in practice that +they are very important to you in debugging. + +The following line, after the version number line or lines, should be a +copyright notice. If more than one copyright notice is called for, put +each on a separate line. + +Next should follow a brief statement that the program is free software, +and that users are free to copy and change it on certain conditions. If +the program is covered by the GNU GPL, say so here. Also mention that +there is no warranty, to the extent permitted by law. + +It is ok to finish the output with a list of the major authors of the +program, as a way of giving credit. + +Here's an example of output that follows these rules: + +@smallexample +GNU Emacs 19.34.5 +Copyright (C) 1996 Free Software Foundation, Inc. +GNU Emacs comes with NO WARRANTY, +to the extent permitted by law. +You may redistribute copies of GNU Emacs +under the terms of the GNU General Public License. +For more information about these matters, +see the files named COPYING. +@end smallexample + +You should adapt this to your program, of course, filling in the proper +year, copyright holder, name of program, and the references to +distribution terms, and changing the rest of the wording as necessary. + +This copyright notice only needs to mention the most recent year in +which changes were made---there's no need to list the years for previous +versions' changes. You don't have to mention the name of the program in +these notices, if that is inconvenient, since it appeared in the first +line. + +@item --help +This option should output brief documentation for how to invoke the +program, on standard output, then exit successfully. Other options and +arguments should be ignored once this is seen, and the program should +not perform its normal function. + +Near the end of the @samp{--help} option's output there should be a line +that says where to mail bug reports. It should have this format: + +@example +Report bugs to @var{mailing-address}. +@end example +@end table + +@node Option Table +@section Table of Long Options + +Here is a table of long options used by GNU programs. It is surely +incomplete, but we aim to list all the options that a new program might +want to be compatible with. If you use names not already in the table, +please send @email{gnu@@gnu.org} a list of them, with their +meanings, so we can update the table. + +@c Please leave newlines between items in this table; it's much easier +@c to update when it isn't completely squashed together and unreadable. +@c When there is more than one short option for a long option name, put +@c a semicolon between the lists of the programs that use them, not a +@c period. --friedman + +@table @samp +@item after-date +@samp{-N} in @code{tar}. + +@item all +@samp{-a} in @code{du}, @code{ls}, @code{nm}, @code{stty}, @code{uname}, +and @code{unexpand}. + +@item all-text +@samp{-a} in @code{diff}. + +@item almost-all +@samp{-A} in @code{ls}. + +@item append +@samp{-a} in @code{etags}, @code{tee}, @code{time}; +@samp{-r} in @code{tar}. + +@item archive +@samp{-a} in @code{cp}. + +@item archive-name +@samp{-n} in @code{shar}. + +@item arglength +@samp{-l} in @code{m4}. + +@item ascii +@samp{-a} in @code{diff}. + +@item assign +@samp{-v} in @code{gawk}. + +@item assume-new +@samp{-W} in Make. + +@item assume-old +@samp{-o} in Make. + +@item auto-check +@samp{-a} in @code{recode}. + +@item auto-pager +@samp{-a} in @code{wdiff}. + +@item auto-reference +@samp{-A} in @code{ptx}. + +@item avoid-wraps +@samp{-n} in @code{wdiff}. + +@item backward-search +@samp{-B} in @code{ctags}. + +@item basename +@samp{-f} in @code{shar}. + +@item batch +Used in GDB. + +@item baud +Used in GDB. + +@item before +@samp{-b} in @code{tac}. + +@item binary +@samp{-b} in @code{cpio} and @code{diff}. + +@item bits-per-code +@samp{-b} in @code{shar}. + +@item block-size +Used in @code{cpio} and @code{tar}. + +@item blocks +@samp{-b} in @code{head} and @code{tail}. + +@item break-file +@samp{-b} in @code{ptx}. + +@item brief +Used in various programs to make output shorter. + +@item bytes +@samp{-c} in @code{head}, @code{split}, and @code{tail}. + +@item c@t{++} +@samp{-C} in @code{etags}. + +@item catenate +@samp{-A} in @code{tar}. + +@item cd +Used in various programs to specify the directory to use. + +@item changes +@samp{-c} in @code{chgrp} and @code{chown}. + +@item classify +@samp{-F} in @code{ls}. + +@item colons +@samp{-c} in @code{recode}. + +@item command +@samp{-c} in @code{su}; +@samp{-x} in GDB. + +@item compare +@samp{-d} in @code{tar}. + +@item compat +Used in @code{gawk}. + +@item compress +@samp{-Z} in @code{tar} and @code{shar}. + +@item concatenate +@samp{-A} in @code{tar}. + +@item confirmation +@samp{-w} in @code{tar}. + +@item context +Used in @code{diff}. + +@item copyleft +@samp{-W copyleft} in @code{gawk}. + +@item copyright +@samp{-C} in @code{ptx}, @code{recode}, and @code{wdiff}; +@samp{-W copyright} in @code{gawk}. + +@item core +Used in GDB. + +@item count +@samp{-q} in @code{who}. + +@item count-links +@samp{-l} in @code{du}. + +@item create +Used in @code{tar} and @code{cpio}. + +@item cut-mark +@samp{-c} in @code{shar}. + +@item cxref +@samp{-x} in @code{ctags}. + +@item date +@samp{-d} in @code{touch}. + +@item debug +@samp{-d} in Make and @code{m4}; +@samp{-t} in Bison. + +@item define +@samp{-D} in @code{m4}. + +@item defines +@samp{-d} in Bison and @code{ctags}. + +@item delete +@samp{-D} in @code{tar}. + +@item dereference +@samp{-L} in @code{chgrp}, @code{chown}, @code{cpio}, @code{du}, +@code{ls}, and @code{tar}. + +@item dereference-args +@samp{-D} in @code{du}. + +@item diacritics +@samp{-d} in @code{recode}. + +@item dictionary-order +@samp{-d} in @code{look}. + +@item diff +@samp{-d} in @code{tar}. + +@item digits +@samp{-n} in @code{csplit}. + +@item directory +Specify the directory to use, in various programs. In @code{ls}, it +means to show directories themselves rather than their contents. In +@code{rm} and @code{ln}, it means to not treat links to directories +specially. + +@item discard-all +@samp{-x} in @code{strip}. + +@item discard-locals +@samp{-X} in @code{strip}. + +@item dry-run +@samp{-n} in Make. + +@item ed +@samp{-e} in @code{diff}. + +@item elide-empty-files +@samp{-z} in @code{csplit}. + +@item end-delete +@samp{-x} in @code{wdiff}. + +@item end-insert +@samp{-z} in @code{wdiff}. + +@item entire-new-file +@samp{-N} in @code{diff}. + +@item environment-overrides +@samp{-e} in Make. + +@item eof +@samp{-e} in @code{xargs}. + +@item epoch +Used in GDB. + +@item error-limit +Used in @code{makeinfo}. + +@item error-output +@samp{-o} in @code{m4}. + +@item escape +@samp{-b} in @code{ls}. + +@item exclude-from +@samp{-X} in @code{tar}. + +@item exec +Used in GDB. + +@item exit +@samp{-x} in @code{xargs}. + +@item exit-0 +@samp{-e} in @code{unshar}. + +@item expand-tabs +@samp{-t} in @code{diff}. + +@item expression +@samp{-e} in @code{sed}. + +@item extern-only +@samp{-g} in @code{nm}. + +@item extract +@samp{-i} in @code{cpio}; +@samp{-x} in @code{tar}. + +@item faces +@samp{-f} in @code{finger}. + +@item fast +@samp{-f} in @code{su}. + +@item fatal-warnings +@samp{-E} in @code{m4}. + +@item file +@samp{-f} in @code{info}, @code{gawk}, Make, @code{mt}, and @code{tar}; +@samp{-n} in @code{sed}; +@samp{-r} in @code{touch}. + +@item field-separator +@samp{-F} in @code{gawk}. + +@item file-prefix +@samp{-b} in Bison. + +@item file-type +@samp{-F} in @code{ls}. + +@item files-from +@samp{-T} in @code{tar}. + +@item fill-column +Used in @code{makeinfo}. + +@item flag-truncation +@samp{-F} in @code{ptx}. + +@item fixed-output-files +@samp{-y} in Bison. + +@item follow +@samp{-f} in @code{tail}. + +@item footnote-style +Used in @code{makeinfo}. + +@item force +@samp{-f} in @code{cp}, @code{ln}, @code{mv}, and @code{rm}. + +@item force-prefix +@samp{-F} in @code{shar}. + +@item format +Used in @code{ls}, @code{time}, and @code{ptx}. + +@item freeze-state +@samp{-F} in @code{m4}. + +@item fullname +Used in GDB. + +@item gap-size +@samp{-g} in @code{ptx}. + +@item get +@samp{-x} in @code{tar}. + +@item graphic +@samp{-i} in @code{ul}. + +@item graphics +@samp{-g} in @code{recode}. + +@item group +@samp{-g} in @code{install}. + +@item gzip +@samp{-z} in @code{tar} and @code{shar}. + +@item hashsize +@samp{-H} in @code{m4}. + +@item header +@samp{-h} in @code{objdump} and @code{recode} + +@item heading +@samp{-H} in @code{who}. + +@item help +Used to ask for brief usage information. + +@item here-delimiter +@samp{-d} in @code{shar}. + +@item hide-control-chars +@samp{-q} in @code{ls}. + +@item idle +@samp{-u} in @code{who}. + +@item ifdef +@samp{-D} in @code{diff}. + +@item ignore +@samp{-I} in @code{ls}; +@samp{-x} in @code{recode}. + +@item ignore-all-space +@samp{-w} in @code{diff}. + +@item ignore-backups +@samp{-B} in @code{ls}. + +@item ignore-blank-lines +@samp{-B} in @code{diff}. + +@item ignore-case +@samp{-f} in @code{look} and @code{ptx}; +@samp{-i} in @code{diff} and @code{wdiff}. + +@item ignore-errors +@samp{-i} in Make. + +@item ignore-file +@samp{-i} in @code{ptx}. + +@item ignore-indentation +@samp{-I} in @code{etags}. + +@item ignore-init-file +@samp{-f} in Oleo. + +@item ignore-interrupts +@samp{-i} in @code{tee}. + +@item ignore-matching-lines +@samp{-I} in @code{diff}. + +@item ignore-space-change +@samp{-b} in @code{diff}. + +@item ignore-zeros +@samp{-i} in @code{tar}. + +@item include +@samp{-i} in @code{etags}; +@samp{-I} in @code{m4}. + +@item include-dir +@samp{-I} in Make. + +@item incremental +@samp{-G} in @code{tar}. + +@item info +@samp{-i}, @samp{-l}, and @samp{-m} in Finger. + +@item initial +@samp{-i} in @code{expand}. + +@item initial-tab +@samp{-T} in @code{diff}. + +@item inode +@samp{-i} in @code{ls}. + +@item interactive +@samp{-i} in @code{cp}, @code{ln}, @code{mv}, @code{rm}; +@samp{-e} in @code{m4}; +@samp{-p} in @code{xargs}; +@samp{-w} in @code{tar}. + +@item intermix-type +@samp{-p} in @code{shar}. + +@item jobs +@samp{-j} in Make. + +@item just-print +@samp{-n} in Make. + +@item keep-going +@samp{-k} in Make. + +@item keep-files +@samp{-k} in @code{csplit}. + +@item kilobytes +@samp{-k} in @code{du} and @code{ls}. + +@item language +@samp{-l} in @code{etags}. + +@item less-mode +@samp{-l} in @code{wdiff}. + +@item level-for-gzip +@samp{-g} in @code{shar}. + +@item line-bytes +@samp{-C} in @code{split}. + +@item lines +Used in @code{split}, @code{head}, and @code{tail}. + +@item link +@samp{-l} in @code{cpio}. + +@item lint +@itemx lint-old +Used in @code{gawk}. + +@item list +@samp{-t} in @code{cpio}; +@samp{-l} in @code{recode}. + +@item list +@samp{-t} in @code{tar}. + +@item literal +@samp{-N} in @code{ls}. + +@item load-average +@samp{-l} in Make. + +@item login +Used in @code{su}. + +@item machine +No listing of which programs already use this; +someone should check to +see if any actually do, and tell @email{gnu@@gnu.org}. + +@item macro-name +@samp{-M} in @code{ptx}. + +@item mail +@samp{-m} in @code{hello} and @code{uname}. + +@item make-directories +@samp{-d} in @code{cpio}. + +@item makefile +@samp{-f} in Make. + +@item mapped +Used in GDB. + +@item max-args +@samp{-n} in @code{xargs}. + +@item max-chars +@samp{-n} in @code{xargs}. + +@item max-lines +@samp{-l} in @code{xargs}. + +@item max-load +@samp{-l} in Make. + +@item max-procs +@samp{-P} in @code{xargs}. + +@item mesg +@samp{-T} in @code{who}. + +@item message +@samp{-T} in @code{who}. + +@item minimal +@samp{-d} in @code{diff}. + +@item mixed-uuencode +@samp{-M} in @code{shar}. + +@item mode +@samp{-m} in @code{install}, @code{mkdir}, and @code{mkfifo}. + +@item modification-time +@samp{-m} in @code{tar}. + +@item multi-volume +@samp{-M} in @code{tar}. + +@item name-prefix +@samp{-a} in Bison. + +@item nesting-limit +@samp{-L} in @code{m4}. + +@item net-headers +@samp{-a} in @code{shar}. + +@item new-file +@samp{-W} in Make. + +@item no-builtin-rules +@samp{-r} in Make. + +@item no-character-count +@samp{-w} in @code{shar}. + +@item no-check-existing +@samp{-x} in @code{shar}. + +@item no-common +@samp{-3} in @code{wdiff}. + +@item no-create +@samp{-c} in @code{touch}. + +@item no-defines +@samp{-D} in @code{etags}. + +@item no-deleted +@samp{-1} in @code{wdiff}. + +@item no-dereference +@samp{-d} in @code{cp}. + +@item no-inserted +@samp{-2} in @code{wdiff}. + +@item no-keep-going +@samp{-S} in Make. + +@item no-lines +@samp{-l} in Bison. + +@item no-piping +@samp{-P} in @code{shar}. + +@item no-prof +@samp{-e} in @code{gprof}. + +@item no-regex +@samp{-R} in @code{etags}. + +@item no-sort +@samp{-p} in @code{nm}. + +@item no-split +Used in @code{makeinfo}. + +@item no-static +@samp{-a} in @code{gprof}. + +@item no-time +@samp{-E} in @code{gprof}. + +@item no-timestamp +@samp{-m} in @code{shar}. + +@item no-validate +Used in @code{makeinfo}. + +@item no-wait +Used in @code{emacsclient}. + +@item no-warn +Used in various programs to inhibit warnings. + +@item node +@samp{-n} in @code{info}. + +@item nodename +@samp{-n} in @code{uname}. + +@item nonmatching +@samp{-f} in @code{cpio}. + +@item nstuff +@samp{-n} in @code{objdump}. + +@item null +@samp{-0} in @code{xargs}. + +@item number +@samp{-n} in @code{cat}. + +@item number-nonblank +@samp{-b} in @code{cat}. + +@item numeric-sort +@samp{-n} in @code{nm}. + +@item numeric-uid-gid +@samp{-n} in @code{cpio} and @code{ls}. + +@item nx +Used in GDB. + +@item old-archive +@samp{-o} in @code{tar}. + +@item old-file +@samp{-o} in Make. + +@item one-file-system +@samp{-l} in @code{tar}, @code{cp}, and @code{du}. + +@item only-file +@samp{-o} in @code{ptx}. + +@item only-prof +@samp{-f} in @code{gprof}. + +@item only-time +@samp{-F} in @code{gprof}. + +@item output +In various programs, specify the output file name. + +@item output-prefix +@samp{-o} in @code{shar}. + +@item override +@samp{-o} in @code{rm}. + +@item overwrite +@samp{-c} in @code{unshar}. + +@item owner +@samp{-o} in @code{install}. + +@item paginate +@samp{-l} in @code{diff}. + +@item paragraph-indent +Used in @code{makeinfo}. + +@item parents +@samp{-p} in @code{mkdir} and @code{rmdir}. + +@item pass-all +@samp{-p} in @code{ul}. + +@item pass-through +@samp{-p} in @code{cpio}. + +@item port +@samp{-P} in @code{finger}. + +@item portability +@samp{-c} in @code{cpio} and @code{tar}. + +@item posix +Used in @code{gawk}. + +@item prefix-builtins +@samp{-P} in @code{m4}. + +@item prefix +@samp{-f} in @code{csplit}. + +@item preserve +Used in @code{tar} and @code{cp}. + +@item preserve-environment +@samp{-p} in @code{su}. + +@item preserve-modification-time +@samp{-m} in @code{cpio}. + +@item preserve-order +@samp{-s} in @code{tar}. + +@item preserve-permissions +@samp{-p} in @code{tar}. + +@item print +@samp{-l} in @code{diff}. + +@item print-chars +@samp{-L} in @code{cmp}. + +@item print-data-base +@samp{-p} in Make. + +@item print-directory +@samp{-w} in Make. + +@item print-file-name +@samp{-o} in @code{nm}. + +@item print-symdefs +@samp{-s} in @code{nm}. + +@item printer +@samp{-p} in @code{wdiff}. + +@item prompt +@samp{-p} in @code{ed}. + +@item query-user +@samp{-X} in @code{shar}. + +@item question +@samp{-q} in Make. + +@item quiet +Used in many programs to inhibit the usual output. @strong{Note:} every +program accepting @samp{--quiet} should accept @samp{--silent} as a +synonym. + +@item quiet-unshar +@samp{-Q} in @code{shar} + +@item quote-name +@samp{-Q} in @code{ls}. + +@item rcs +@samp{-n} in @code{diff}. + +@item re-interval +Used in @code{gawk}. + +@item read-full-blocks +@samp{-B} in @code{tar}. + +@item readnow +Used in GDB. + +@item recon +@samp{-n} in Make. + +@item record-number +@samp{-R} in @code{tar}. + +@item recursive +Used in @code{chgrp}, @code{chown}, @code{cp}, @code{ls}, @code{diff}, +and @code{rm}. + +@item reference-limit +Used in @code{makeinfo}. + +@item references +@samp{-r} in @code{ptx}. + +@item regex +@samp{-r} in @code{tac} and @code{etags}. + +@item release +@samp{-r} in @code{uname}. + +@item reload-state +@samp{-R} in @code{m4}. + +@item relocation +@samp{-r} in @code{objdump}. + +@item rename +@samp{-r} in @code{cpio}. + +@item replace +@samp{-i} in @code{xargs}. + +@item report-identical-files +@samp{-s} in @code{diff}. + +@item reset-access-time +@samp{-a} in @code{cpio}. + +@item reverse +@samp{-r} in @code{ls} and @code{nm}. + +@item reversed-ed +@samp{-f} in @code{diff}. + +@item right-side-defs +@samp{-R} in @code{ptx}. + +@item same-order +@samp{-s} in @code{tar}. + +@item same-permissions +@samp{-p} in @code{tar}. + +@item save +@samp{-g} in @code{stty}. + +@item se +Used in GDB. + +@item sentence-regexp +@samp{-S} in @code{ptx}. + +@item separate-dirs +@samp{-S} in @code{du}. + +@item separator +@samp{-s} in @code{tac}. + +@item sequence +Used by @code{recode} to chose files or pipes for sequencing passes. + +@item shell +@samp{-s} in @code{su}. + +@item show-all +@samp{-A} in @code{cat}. + +@item show-c-function +@samp{-p} in @code{diff}. + +@item show-ends +@samp{-E} in @code{cat}. + +@item show-function-line +@samp{-F} in @code{diff}. + +@item show-tabs +@samp{-T} in @code{cat}. + +@item silent +Used in many programs to inhibit the usual output. +@strong{Note:} every program accepting +@samp{--silent} should accept @samp{--quiet} as a synonym. + +@item size +@samp{-s} in @code{ls}. + +@item sort +Used in @code{ls}. + +@item source +@samp{-W source} in @code{gawk}. + +@item sparse +@samp{-S} in @code{tar}. + +@item speed-large-files +@samp{-H} in @code{diff}. + +@item split-at +@samp{-E} in @code{unshar}. + +@item split-size-limit +@samp{-L} in @code{shar}. + +@item squeeze-blank +@samp{-s} in @code{cat}. + +@item start-delete +@samp{-w} in @code{wdiff}. + +@item start-insert +@samp{-y} in @code{wdiff}. + +@item starting-file +Used in @code{tar} and @code{diff} to specify which file within +a directory to start processing with. + +@item statistics +@samp{-s} in @code{wdiff}. + +@item stdin-file-list +@samp{-S} in @code{shar}. + +@item stop +@samp{-S} in Make. + +@item strict +@samp{-s} in @code{recode}. + +@item strip +@samp{-s} in @code{install}. + +@item strip-all +@samp{-s} in @code{strip}. + +@item strip-debug +@samp{-S} in @code{strip}. + +@item submitter +@samp{-s} in @code{shar}. + +@item suffix +@samp{-S} in @code{cp}, @code{ln}, @code{mv}. + +@item suffix-format +@samp{-b} in @code{csplit}. + +@item sum +@samp{-s} in @code{gprof}. + +@item summarize +@samp{-s} in @code{du}. + +@item symbolic +@samp{-s} in @code{ln}. + +@item symbols +Used in GDB and @code{objdump}. + +@item synclines +@samp{-s} in @code{m4}. + +@item sysname +@samp{-s} in @code{uname}. + +@item tabs +@samp{-t} in @code{expand} and @code{unexpand}. + +@item tabsize +@samp{-T} in @code{ls}. + +@item terminal +@samp{-T} in @code{tput} and @code{ul}. +@samp{-t} in @code{wdiff}. + +@item text +@samp{-a} in @code{diff}. + +@item text-files +@samp{-T} in @code{shar}. + +@item time +Used in @code{ls} and @code{touch}. + +@item to-stdout +@samp{-O} in @code{tar}. + +@item total +@samp{-c} in @code{du}. + +@item touch +@samp{-t} in Make, @code{ranlib}, and @code{recode}. + +@item trace +@samp{-t} in @code{m4}. + +@item traditional +@samp{-t} in @code{hello}; +@samp{-W traditional} in @code{gawk}; +@samp{-G} in @code{ed}, @code{m4}, and @code{ptx}. + +@item tty +Used in GDB. + +@item typedefs +@samp{-t} in @code{ctags}. + +@item typedefs-and-c++ +@samp{-T} in @code{ctags}. + +@item typeset-mode +@samp{-t} in @code{ptx}. + +@item uncompress +@samp{-z} in @code{tar}. + +@item unconditional +@samp{-u} in @code{cpio}. + +@item undefine +@samp{-U} in @code{m4}. + +@item undefined-only +@samp{-u} in @code{nm}. + +@item update +@samp{-u} in @code{cp}, @code{ctags}, @code{mv}, @code{tar}. + +@item usage +Used in @code{gawk}; same as @samp{--help}. + +@item uuencode +@samp{-B} in @code{shar}. + +@item vanilla-operation +@samp{-V} in @code{shar}. + +@item verbose +Print more information about progress. Many programs support this. + +@item verify +@samp{-W} in @code{tar}. + +@item version +Print the version number. + +@item version-control +@samp{-V} in @code{cp}, @code{ln}, @code{mv}. + +@item vgrind +@samp{-v} in @code{ctags}. + +@item volume +@samp{-V} in @code{tar}. + +@item what-if +@samp{-W} in Make. + +@item whole-size-limit +@samp{-l} in @code{shar}. + +@item width +@samp{-w} in @code{ls} and @code{ptx}. + +@item word-regexp +@samp{-W} in @code{ptx}. + +@item writable +@samp{-T} in @code{who}. + +@item zeros +@samp{-z} in @code{gprof}. +@end table + +@node Memory Usage +@section Memory Usage + +If it typically uses just a few meg of memory, don't bother making any +effort to reduce memory usage. For example, if it is impractical for +other reasons to operate on files more than a few meg long, it is +reasonable to read entire input files into core to operate on them. + +However, for programs such as @code{cat} or @code{tail}, that can +usefully operate on very large files, it is important to avoid using a +technique that would artificially limit the size of files it can handle. +If a program works by lines and could be applied to arbitrary +user-supplied input files, it should keep only a line in memory, because +this is not very hard and users will want to be able to operate on input +files that are bigger than will fit in core all at once. + +If your program creates complicated data structures, just make them in +core and give a fatal error if @code{malloc} returns zero. + +@node Writing C +@chapter Making The Best Use of C + +This @value{CHAPTER} provides advice on how best to use the C language +when writing GNU software. + +@menu +* Formatting:: Formatting Your Source Code +* Comments:: Commenting Your Work +* Syntactic Conventions:: Clean Use of C Constructs +* Names:: Naming Variables and Functions +* System Portability:: Portability between different operating systems +* CPU Portability:: Supporting the range of CPU types +* System Functions:: Portability and ``standard'' library functions +* Internationalization:: Techniques for internationalization +* Mmap:: How you can safely use @code{mmap}. +@end menu + +@node Formatting +@section Formatting Your Source Code + +It is important to put the open-brace that starts the body of a C +function in column zero, and avoid putting any other open-brace or +open-parenthesis or open-bracket in column zero. Several tools look +for open-braces in column zero to find the beginnings of C functions. +These tools will not work on code not formatted that way. + +It is also important for function definitions to start the name of the +function in column zero. This helps people to search for function +definitions, and may also help certain tools recognize them. Thus, +the proper format is this: + +@example +static char * +concat (s1, s2) /* Name starts in column zero here */ + char *s1, *s2; +@{ /* Open brace in column zero here */ + @dots{} +@} +@end example + +@noindent +or, if you want to use @sc{ansi} C, format the definition like this: + +@example +static char * +concat (char *s1, char *s2) +@{ + @dots{} +@} +@end example + +In @sc{ansi} C, if the arguments don't fit nicely on one line, +split it like this: + +@example +int +lots_of_args (int an_integer, long a_long, short a_short, + double a_double, float a_float) +@dots{} +@end example + +For the body of the function, we prefer code formatted like this: + +@example +if (x < foo (y, z)) + haha = bar[4] + 5; +else + @{ + while (z) + @{ + haha += foo (z, z); + z--; + @} + return ++x + bar (); + @} +@end example + +We find it easier to read a program when it has spaces before the +open-parentheses and after the commas. Especially after the commas. + +When you split an expression into multiple lines, split it +before an operator, not after one. Here is the right way: + +@example +if (foo_this_is_long && bar > win (x, y, z) + && remaining_condition) +@end example + +Try to avoid having two operators of different precedence at the same +level of indentation. For example, don't write this: + +@example +mode = (inmode[j] == VOIDmode + || GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]) + ? outmode[j] : inmode[j]); +@end example + +Instead, use extra parentheses so that the indentation shows the nesting: + +@example +mode = ((inmode[j] == VOIDmode + || (GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]))) + ? outmode[j] : inmode[j]); +@end example + +Insert extra parentheses so that Emacs will indent the code properly. +For example, the following indentation looks nice if you do it by hand, +but Emacs would mess it up: + +@example +v = rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000; +@end example + +But adding a set of parentheses solves the problem: + +@example +v = (rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000); +@end example + +Format do-while statements like this: + +@example +do + @{ + a = foo (a); + @} +while (a > 0); +@end example + +Please use formfeed characters (control-L) to divide the program into +pages at logical places (but not within a function). It does not matter +just how long the pages are, since they do not have to fit on a printed +page. The formfeeds should appear alone on lines by themselves. + + +@node Comments +@section Commenting Your Work + +Every program should start with a comment saying briefly what it is for. +Example: @samp{fmt - filter for simple filling of text}. + +Please write the comments in a GNU program in English, because English +is the one language that nearly all programmers in all countries can +read. If you do not write English well, please write comments in +English as well as you can, then ask other people to help rewrite them. +If you can't write comments in English, please find someone to work with +you and translate your comments into English. + +Please put a comment on each function saying what the function does, +what sorts of arguments it gets, and what the possible values of +arguments mean and are used for. It is not necessary to duplicate in +words the meaning of the C argument declarations, if a C type is being +used in its customary fashion. If there is anything nonstandard about +its use (such as an argument of type @code{char *} which is really the +address of the second character of a string, not the first), or any +possible values that would not work the way one would expect (such as, +that strings containing newlines are not guaranteed to work), be sure +to say so. + +Also explain the significance of the return value, if there is one. + +Please put two spaces after the end of a sentence in your comments, so +that the Emacs sentence commands will work. Also, please write +complete sentences and capitalize the first word. If a lower-case +identifier comes at the beginning of a sentence, don't capitalize it! +Changing the spelling makes it a different identifier. If you don't +like starting a sentence with a lower case letter, write the sentence +differently (e.g., ``The identifier lower-case is @dots{}''). + +The comment on a function is much clearer if you use the argument +names to speak about the argument values. The variable name itself +should be lower case, but write it in upper case when you are speaking +about the value rather than the variable itself. Thus, ``the inode +number NODE_NUM'' rather than ``an inode''. + +There is usually no purpose in restating the name of the function in +the comment before it, because the reader can see that for himself. +There might be an exception when the comment is so long that the function +itself would be off the bottom of the screen. + +There should be a comment on each static variable as well, like this: + +@example +/* Nonzero means truncate lines in the display; + zero means continue them. */ +int truncate_lines; +@end example + +Every @samp{#endif} should have a comment, except in the case of short +conditionals (just a few lines) that are not nested. The comment should +state the condition of the conditional that is ending, @emph{including +its sense}. @samp{#else} should have a comment describing the condition +@emph{and sense} of the code that follows. For example: + +@example +@group +#ifdef foo + @dots{} +#else /* not foo */ + @dots{} +#endif /* not foo */ +@end group +@group +#ifdef foo + @dots{} +#endif /* foo */ +@end group +@end example + +@noindent +but, by contrast, write the comments this way for a @samp{#ifndef}: + +@example +@group +#ifndef foo + @dots{} +#else /* foo */ + @dots{} +#endif /* foo */ +@end group +@group +#ifndef foo + @dots{} +#endif /* not foo */ +@end group +@end example + +@node Syntactic Conventions +@section Clean Use of C Constructs + +Please explicitly declare all arguments to functions. +Don't omit them just because they are @code{int}s. + +Declarations of external functions and functions to appear later in the +source file should all go in one place near the beginning of the file +(somewhere before the first function definition in the file), or else +should go in a header file. Don't put @code{extern} declarations inside +functions. + +It used to be common practice to use the same local variables (with +names like @code{tem}) over and over for different values within one +function. Instead of doing this, it is better declare a separate local +variable for each distinct purpose, and give it a name which is +meaningful. This not only makes programs easier to understand, it also +facilitates optimization by good compilers. You can also move the +declaration of each local variable into the smallest scope that includes +all its uses. This makes the program even cleaner. + +Don't use local variables or parameters that shadow global identifiers. + +Don't declare multiple variables in one declaration that spans lines. +Start a new declaration on each line, instead. For example, instead +of this: + +@example +@group +int foo, + bar; +@end group +@end example + +@noindent +write either this: + +@example +int foo, bar; +@end example + +@noindent +or this: + +@example +int foo; +int bar; +@end example + +@noindent +(If they are global variables, each should have a comment preceding it +anyway.) + +When you have an @code{if}-@code{else} statement nested in another +@code{if} statement, always put braces around the @code{if}-@code{else}. +Thus, never write like this: + +@example +if (foo) + if (bar) + win (); + else + lose (); +@end example + +@noindent +always like this: + +@example +if (foo) + @{ + if (bar) + win (); + else + lose (); + @} +@end example + +If you have an @code{if} statement nested inside of an @code{else} +statement, either write @code{else if} on one line, like this, + +@example +if (foo) + @dots{} +else if (bar) + @dots{} +@end example + +@noindent +with its @code{then}-part indented like the preceding @code{then}-part, +or write the nested @code{if} within braces like this: + +@example +if (foo) + @dots{} +else + @{ + if (bar) + @dots{} + @} +@end example + +Don't declare both a structure tag and variables or typedefs in the +same declaration. Instead, declare the structure tag separately +and then use it to declare the variables or typedefs. + +Try to avoid assignments inside @code{if}-conditions. For example, +don't write this: + +@example +if ((foo = (char *) malloc (sizeof *foo)) == 0) + fatal ("virtual memory exhausted"); +@end example + +@noindent +instead, write this: + +@example +foo = (char *) malloc (sizeof *foo); +if (foo == 0) + fatal ("virtual memory exhausted"); +@end example + +Don't make the program ugly to placate @code{lint}. Please don't insert any +casts to @code{void}. Zero without a cast is perfectly fine as a null +pointer constant, except when calling a varargs function. + +@node Names +@section Naming Variables and Functions + +The names of global variables and functions in a program serve as +comments of a sort. So don't choose terse names---instead, look for +names that give useful information about the meaning of the variable or +function. In a GNU program, names should be English, like other +comments. + +Local variable names can be shorter, because they are used only within +one context, where (presumably) comments explain their purpose. + +Please use underscores to separate words in a name, so that the Emacs +word commands can be useful within them. Stick to lower case; reserve +upper case for macros and @code{enum} constants, and for name-prefixes +that follow a uniform convention. + +For example, you should use names like @code{ignore_space_change_flag}; +don't use names like @code{iCantReadThis}. + +Variables that indicate whether command-line options have been +specified should be named after the meaning of the option, not after +the option-letter. A comment should state both the exact meaning of +the option and its letter. For example, + +@example +@group +/* Ignore changes in horizontal whitespace (-b). */ +int ignore_space_change_flag; +@end group +@end example + +When you want to define names with constant integer values, use +@code{enum} rather than @samp{#define}. GDB knows about enumeration +constants. + +Use file names of 14 characters or less, to avoid creating gratuitous +problems on older System V systems. You can use the program +@code{doschk} to test for this. @code{doschk} also tests for potential +name conflicts if the files were loaded onto an MS-DOS file +system---something you may or may not care about. + +@node System Portability +@section Portability between System Types + +In the Unix world, ``portability'' refers to porting to different Unix +versions. For a GNU program, this kind of portability is desirable, but +not paramount. + +The primary purpose of GNU software is to run on top of the GNU kernel, +compiled with the GNU C compiler, on various types of @sc{cpu}. The +amount and kinds of variation among GNU systems on different @sc{cpu}s +will be comparable to the variation among Linux-based GNU systems or +among BSD systems today. So the kinds of portability that are absolutely +necessary are quite limited. + +But many users do run GNU software on non-GNU Unix or Unix-like systems. +So supporting a variety of Unix-like systems is desirable, although not +paramount. + +The easiest way to achieve portability to most Unix-like systems is to +use Autoconf. It's unlikely that your program needs to know more +information about the host platform than Autoconf can provide, simply +because most of the programs that need such knowledge have already been +written. + +Avoid using the format of semi-internal data bases (e.g., directories) +when there is a higher-level alternative (@code{readdir}). + +As for systems that are not like Unix, such as MSDOS, Windows, the +Macintosh, VMS, and MVS, supporting them is usually so much work that it +is better if you don't. + +The planned GNU kernel is not finished yet, but you can tell which +facilities it will provide by looking at the GNU C Library Manual. The +GNU kernel is based on Mach, so the features of Mach will also be +available. However, if you use Mach features, you'll probably have +trouble debugging your program today. + +@node CPU Portability +@section Portability between @sc{cpu}s + +Even GNU systems will differ because of differences among @sc{cpu} +types---for example, difference in byte ordering and alignment +requirements. It is absolutely essential to handle these differences. +However, don't make any effort to cater to the possibility that an +@code{int} will be less than 32 bits. We don't support 16-bit machines +in GNU. + +Don't assume that the address of an @code{int} object is also the +address of its least-significant byte. This is false on big-endian +machines. Thus, don't make the following mistake: + +@example +int c; +@dots{} +while ((c = getchar()) != EOF) + write(file_descriptor, &c, 1); +@end example + +When calling functions, you need not worry about the difference between +pointers of various types, or between pointers and integers. On most +machines, there's no difference anyway. As for the few machines where +there is a difference, all of them support @sc{ansi} C, so you can use +prototypes (conditionalized to be active only in @sc{ansi} C) to make +the code work on those systems. + +In certain cases, it is ok to pass integer and pointer arguments +indiscriminately to the same function, and use no prototype on any +system. For example, many GNU programs have error-reporting functions +that pass their arguments along to @code{printf} and friends: + +@example +error (s, a1, a2, a3) + char *s; + int a1, a2, a3; +@{ + fprintf (stderr, "error: "); + fprintf (stderr, s, a1, a2, a3); +@} +@end example + +@noindent +In practice, this works on all machines, and it is much simpler than any +``correct'' alternative. Be sure @emph{not} to use a prototype +for such functions. + +However, avoid casting pointers to integers unless you really need to. +These assumptions really reduce portability, and in most programs they +are easy to avoid. In the cases where casting pointers to integers is +essential---such as, a Lisp interpreter which stores type information as +well as an address in one word---it is ok to do so, but you'll have to +make explicit provisions to handle different word sizes. + +@node System Functions +@section Calling System Functions + +C implementations differ substantially. @sc{ansi} C reduces but does not +eliminate the incompatibilities; meanwhile, many users wish to compile +GNU software with pre-@sc{ansi} compilers. This chapter gives +recommendations for how to use the more or less standard C library +functions to avoid unnecessary loss of portability. + +@itemize @bullet +@item +Don't use the value of @code{sprintf}. It returns the number of +characters written on some systems, but not on all systems. + +@item +@code{main} should be declared to return type @code{int}. It should +terminate either by calling @code{exit} or by returning the integer +status code; make sure it cannot ever return an undefined value. + +@item +Don't declare system functions explicitly. + +Almost any declaration for a system function is wrong on some system. +To minimize conflicts, leave it to the system header files to declare +system functions. If the headers don't declare a function, let it +remain undeclared. + +While it may seem unclean to use a function without declaring it, in +practice this works fine for most system library functions on the +systems where this really happens; thus, the disadvantage is only +theoretical. By contrast, actual declarations have frequently caused +actual conflicts. + +@item +If you must declare a system function, don't specify the argument types. +Use an old-style declaration, not an @sc{ansi} prototype. The more you +specify about the function, the more likely a conflict. + +@item +In particular, don't unconditionally declare @code{malloc} or +@code{realloc}. + +Most GNU programs use those functions just once, in functions +conventionally named @code{xmalloc} and @code{xrealloc}. These +functions call @code{malloc} and @code{realloc}, respectively, and +check the results. + +Because @code{xmalloc} and @code{xrealloc} are defined in your program, +you can declare them in other files without any risk of type conflict. + +On most systems, @code{int} is the same length as a pointer; thus, the +calls to @code{malloc} and @code{realloc} work fine. For the few +exceptional systems (mostly 64-bit machines), you can use +@strong{conditionalized} declarations of @code{malloc} and +@code{realloc}---or put these declarations in configuration files +specific to those systems. + +@item +The string functions require special treatment. Some Unix systems have +a header file @file{string.h}; others have @file{strings.h}. Neither +file name is portable. There are two things you can do: use Autoconf to +figure out which file to include, or don't include either file. + +@item +If you don't include either strings file, you can't get declarations for +the string functions from the header file in the usual way. + +That causes less of a problem than you might think. The newer @sc{ansi} +string functions should be avoided anyway because many systems still +don't support them. The string functions you can use are these: + +@example +strcpy strncpy strcat strncat +strlen strcmp strncmp +strchr strrchr +@end example + +The copy and concatenate functions work fine without a declaration as +long as you don't use their values. Using their values without a +declaration fails on systems where the width of a pointer differs from +the width of @code{int}, and perhaps in other cases. It is trivial to +avoid using their values, so do that. + +The compare functions and @code{strlen} work fine without a declaration +on most systems, possibly all the ones that GNU software runs on. +You may find it necessary to declare them @strong{conditionally} on a +few systems. + +The search functions must be declared to return @code{char *}. Luckily, +there is no variation in the data type they return. But there is +variation in their names. Some systems give these functions the names +@code{index} and @code{rindex}; other systems use the names +@code{strchr} and @code{strrchr}. Some systems support both pairs of +names, but neither pair works on all systems. + +You should pick a single pair of names and use it throughout your +program. (Nowadays, it is better to choose @code{strchr} and +@code{strrchr} for new programs, since those are the standard @sc{ansi} +names.) Declare both of those names as functions returning @code{char +*}. On systems which don't support those names, define them as macros +in terms of the other pair. For example, here is what to put at the +beginning of your file (or in a header) if you want to use the names +@code{strchr} and @code{strrchr} throughout: + +@example +#ifndef HAVE_STRCHR +#define strchr index +#endif +#ifndef HAVE_STRRCHR +#define strrchr rindex +#endif + +char *strchr (); +char *strrchr (); +@end example +@end itemize + +Here we assume that @code{HAVE_STRCHR} and @code{HAVE_STRRCHR} are +macros defined in systems where the corresponding functions exist. +One way to get them properly defined is to use Autoconf. + +@node Internationalization +@section Internationalization + +GNU has a library called GNU gettext that makes it easy to translate the +messages in a program into various languages. You should use this +library in every program. Use English for the messages as they appear +in the program, and let gettext provide the way to translate them into +other languages. + +Using GNU gettext involves putting a call to the @code{gettext} macro +around each string that might need translation---like this: + +@example +printf (gettext ("Processing file `%s'...")); +@end example + +@noindent +This permits GNU gettext to replace the string @code{"Processing file +`%s'..."} with a translated version. + +Once a program uses gettext, please make a point of writing calls to +@code{gettext} when you add new strings that call for translation. + +Using GNU gettext in a package involves specifying a @dfn{text domain +name} for the package. The text domain name is used to separate the +translations for this package from the translations for other packages. +Normally, the text domain name should be the same as the name of the +package---for example, @samp{fileutils} for the GNU file utilities. + +To enable gettext to work well, avoid writing code that makes +assumptions about the structure of words or sentences. When you want +the precise text of a sentence to vary depending on the data, use two or +more alternative string constants each containing a complete sentences, +rather than inserting conditionalized words or phrases into a single +sentence framework. + +Here is an example of what not to do: + +@example +printf ("%d file%s processed", nfiles, + nfiles != 1 ? "s" : ""); +@end example + +@noindent +The problem with that example is that it assumes that plurals are made +by adding `s'. If you apply gettext to the format string, like this, + +@example +printf (gettext ("%d file%s processed"), nfiles, + nfiles != 1 ? "s" : ""); +@end example + +@noindent +the message can use different words, but it will still be forced to use +`s' for the plural. Here is a better way: + +@example +printf ((nfiles != 1 ? "%d files processed" + : "%d file processed"), + nfiles); +@end example + +@noindent +This way, you can apply gettext to each of the two strings +independently: + +@example +printf ((nfiles != 1 ? gettext ("%d files processed") + : gettext ("%d file processed")), + nfiles); +@end example + +@noindent +This can be any method of forming the plural of the word for ``file'', and +also handles languages that require agreement in the word for +``processed''. + +A similar problem appears at the level of sentence structure with this +code: + +@example +printf ("# Implicit rule search has%s been done.\n", + f->tried_implicit ? "" : " not"); +@end example + +@noindent +Adding @code{gettext} calls to this code cannot give correct results for +all languages, because negation in some languages requires adding words +at more than one place in the sentence. By contrast, adding +@code{gettext} calls does the job straightfowardly if the code starts +out like this: + +@example +printf (f->tried_implicit + ? "# Implicit rule search has been done.\n", + : "# Implicit rule search has not been done.\n"); +@end example + +@node Mmap +@section Mmap + +Don't assume that @code{mmap} either works on all files or fails +for all files. It may work on some files and fail on others. + +The proper way to use @code{mmap} is to try it on the specific file for +which you want to use it---and if @code{mmap} doesn't work, fall back on +doing the job in another way using @code{read} and @code{write}. + +The reason this precaution is needed is that the GNU kernel (the HURD) +provides a user-extensible file system, in which there can be many +different kinds of ``ordinary files.'' Many of them support +@code{mmap}, but some do not. It is important to make programs handle +all these kinds of files. + +@node Documentation +@chapter Documenting Programs + +@menu +* GNU Manuals:: Writing proper manuals. +* Manual Structure Details:: Specific structure conventions. +* NEWS File:: NEWS files supplement manuals. +* Change Logs:: Recording Changes +* Man Pages:: Man pages are secondary. +* Reading other Manuals:: How far you can go in learning + from other manuals. +@end menu + +@node GNU Manuals +@section GNU Manuals + +The preferred way to document part of the GNU system is to write a +manual in the Texinfo formatting language. See the Texinfo manual, +either the hardcopy, or the on-line version available through +@code{info} or the Emacs Info subsystem (@kbd{C-h i}). + +Programmers often find it most natural to structure the documentation +following the structure of the implementation, which they know. But +this structure is not necessarily good for explaining how to use the +program; it may be irrelevant and confusing for a user. + +At every level, from the sentences in a paragraph to the grouping of +topics into separate manuals, the right way to structure documentation +is according to the concepts and questions that a user will have in mind +when reading it. Sometimes this structure of ideas matches the +structure of the implementation of the software being documented---but +often they are different. Often the most important part of learning to +write good documentation is learning to notice when you are structuring +the documentation like the implementation, and think about better +alternatives. + +For example, each program in the GNU system probably ought to be +documented in one manual; but this does not mean each program should +have its own manual. That would be following the structure of the +implementation, rather than the structure that helps the user +understand. + +Instead, each manual should cover a coherent @emph{topic}. For example, +instead of a manual for @code{diff} and a manual for @code{diff3}, we +have one manual for ``comparison of files'' which covers both of those +programs, as well as @code{cmp}. By documenting these programs +together, we can make the whole subject clearer. + +The manual which discusses a program should document all of the +program's command-line options and all of its commands. It should give +examples of their use. But don't organize the manual as a list of +features. Instead, organize it logically, by subtopics. Address the +questions that a user will ask when thinking about the job that the +program does. + +In general, a GNU manual should serve both as tutorial and reference. +It should be set up for convenient access to each topic through Info, +and for reading straight through (appendixes aside). A GNU manual +should give a good introduction to a beginner reading through from the +start, and should also provide all the details that hackers want. + +That is not as hard as it first sounds. Arrange each chapter as a +logical breakdown of its topic, but order the sections, and write their +text, so that reading the chapter straight through makes sense. Do +likewise when structuring the book into chapters, and when structuring a +section into paragraphs. The watchword is, @emph{at each point, address +the most fundamental and important issue raised by the preceding text.} + +If necessary, add extra chapters at the beginning of the manual which +are purely tutorial and cover the basics of the subject. These provide +the framework for a beginner to understand the rest of the manual. The +Bison manual provides a good example of how to do this. + +Don't use Unix man pages as a model for how to write GNU documentation; +most of them are terse, badly structured, and give inadequate +explanation of the underlying concepts. (There are, of course +exceptions.) Also Unix man pages use a particular format which is +different from what we use in GNU manuals. + +Please do not use the term ``pathname'' that is used in Unix +documentation; use ``file name'' (two words) instead. We use the term +``path'' only for search paths, which are lists of file names. + +Please do not use the term ``illegal'' to refer to erroneous input to a +computer program. Please use ``invalid'' for this, and reserve the term +``illegal'' for violations of law. + +@node Manual Structure Details +@section Manual Structure Details + +The title page of the manual should state the version of the programs or +packages documented in the manual. The Top node of the manual should +also contain this information. If the manual is changing more +frequently than or independent of the program, also state a version +number for the manual in both of these places. + +Each program documented in the manual should should have a node named +@samp{@var{program} Invocation} or @samp{Invoking @var{program}}. This +node (together with its subnodes, if any) should describe the program's +command line arguments and how to run it (the sort of information people +would look in a man page for). Start with an @samp{@@example} +containing a template for all the options and arguments that the program +uses. + +Alternatively, put a menu item in some menu whose item name fits one of +the above patterns. This identifies the node which that item points to +as the node for this purpose, regardless of the node's actual name. + +There will be automatic features for specifying a program name and +quickly reading just this part of its manual. + +If one manual describes several programs, it should have such a node for +each program described. + +@node NEWS File +@section The NEWS File + +In addition to its manual, the package should have a file named +@file{NEWS} which contains a list of user-visible changes worth +mentioning. In each new release, add items to the front of the file and +identify the version they pertain to. Don't discard old items; leave +them in the file after the newer items. This way, a user upgrading from +any previous version can see what is new. + +If the @file{NEWS} file gets very long, move some of the older items +into a file named @file{ONEWS} and put a note at the end referring the +user to that file. + +@node Change Logs +@section Change Logs + +Keep a change log to describe all the changes made to program source +files. The purpose of this is so that people investigating bugs in the +future will know about the changes that might have introduced the bug. +Often a new bug can be found by looking at what was recently changed. +More importantly, change logs can help you eliminate conceptual +inconsistencies between different parts of a program, by giving you a +history of how the conflicting concepts arose and who they came from. + +@menu +* Change Log Concepts:: +* Style of Change Logs:: +* Simple Changes:: +* Conditional Changes:: +@end menu + +@node Change Log Concepts +@subsection Change Log Concepts + +You can think of the change log as a conceptual ``undo list'' which +explains how earlier versions were different from the current version. +People can see the current version; they don't need the change log +to tell them what is in it. What they want from a change log is a +clear explanation of how the earlier version differed. + +The change log file is normally called @file{ChangeLog} and covers an +entire directory. Each directory can have its own change log, or a +directory can use the change log of its parent directory--it's up to +you. + +Another alternative is to record change log information with a version +control system such as RCS or CVS. This can be converted automatically +to a @file{ChangeLog} file. + +There's no need to describe the full purpose of the changes or how they +work together. If you think that a change calls for explanation, you're +probably right. Please do explain it---but please put the explanation +in comments in the code, where people will see it whenever they see the +code. For example, ``New function'' is enough for the change log when +you add a function, because there should be a comment before the +function definition to explain what it does. + +However, sometimes it is useful to write one line to describe the +overall purpose of a batch of changes. + +The easiest way to add an entry to @file{ChangeLog} is with the Emacs +command @kbd{M-x add-change-log-entry}. An entry should have an +asterisk, the name of the changed file, and then in parentheses the name +of the changed functions, variables or whatever, followed by a colon. +Then describe the changes you made to that function or variable. + +@node Style of Change Logs +@subsection Style of Change Logs + +Here are some examples of change log entries: + +@example +* register.el (insert-register): Return nil. +(jump-to-register): Likewise. + +* sort.el (sort-subr): Return nil. + +* tex-mode.el (tex-bibtex-file, tex-file, tex-region): +Restart the tex shell if process is gone or stopped. +(tex-shell-running): New function. + +* expr.c (store_one_arg): Round size up for move_block_to_reg. +(expand_call): Round up when emitting USE insns. +* stmt.c (assign_parms): Round size up for move_block_from_reg. +@end example + +It's important to name the changed function or variable in full. Don't +abbreviate function or variable names, and don't combine them. +Subsequent maintainers will often search for a function name to find all +the change log entries that pertain to it; if you abbreviate the name, +they won't find it when they search. + +For example, some people are tempted to abbreviate groups of function +names by writing @samp{* register.el (@{insert,jump-to@}-register)}; +this is not a good idea, since searching for @code{jump-to-register} or +@code{insert-register} would not find that entry. + +Separate unrelated change log entries with blank lines. When two +entries represent parts of the same change, so that they work together, +then don't put blank lines between them. Then you can omit the file +name and the asterisk when successive entries are in the same file. + +@node Simple Changes +@subsection Simple Changes + +Certain simple kinds of changes don't need much detail in the change +log. + +When you change the calling sequence of a function in a simple fashion, +and you change all the callers of the function, there is no need to make +individual entries for all the callers that you changed. Just write in +the entry for the function being called, ``All callers changed.'' + +@example +* keyboard.c (Fcommand_execute): New arg SPECIAL. +All callers changed. +@end example + +When you change just comments or doc strings, it is enough to write an +entry for the file, without mentioning the functions. Just ``Doc +fixes'' is enough for the change log. + +There's no need to make change log entries for documentation files. +This is because documentation is not susceptible to bugs that are hard +to fix. Documentation does not consist of parts that must interact in a +precisely engineered fashion. To correct an error, you need not know +the history of the erroneous passage; it is enough to compare what the +documentation says with the way the program actually works. + +@node Conditional Changes +@subsection Conditional Changes + +C programs often contain compile-time @code{#if} conditionals. Many +changes are conditional; sometimes you add a new definition which is +entirely contained in a conditional. It is very useful to indicate in +the change log the conditions for which the change applies. + +Our convention for indicating conditional changes is to use square +brackets around the name of the condition. + +Here is a simple example, describing a change which is conditional but +does not have a function or entity name associated with it: + +@example +* xterm.c [SOLARIS2]: Include string.h. +@end example + +Here is an entry describing a new definition which is entirely +conditional. This new definition for the macro @code{FRAME_WINDOW_P} is +used only when @code{HAVE_X_WINDOWS} is defined: + +@example +* frame.h [HAVE_X_WINDOWS] (FRAME_WINDOW_P): Macro defined. +@end example + +Here is an entry for a change within the function @code{init_display}, +whose definition as a whole is unconditional, but the changes themselves +are contained in a @samp{#ifdef HAVE_LIBNCURSES} conditional: + +@example +* dispnew.c (init_display) [HAVE_LIBNCURSES]: If X, call tgetent. +@end example + +Here is an entry for a change that takes affect only when +a certain macro is @emph{not} defined: + +@example +(gethostname) [!HAVE_SOCKETS]: Replace with winsock version. +@end example + +@node Man Pages +@section Man Pages + +In the GNU project, man pages are secondary. It is not necessary or +expected for every GNU program to have a man page, but some of them do. +It's your choice whether to include a man page in your program. + +When you make this decision, consider that supporting a man page +requires continual effort each time the program is changed. The time +you spend on the man page is time taken away from more useful work. + +For a simple program which changes little, updating the man page may be +a small job. Then there is little reason not to include a man page, if +you have one. + +For a large program that changes a great deal, updating a man page may +be a substantial burden. If a user offers to donate a man page, you may +find this gift costly to accept. It may be better to refuse the man +page unless the same person agrees to take full responsibility for +maintaining it---so that you can wash your hands of it entirely. If +this volunteer later ceases to do the job, then don't feel obliged to +pick it up yourself; it may be better to withdraw the man page from the +distribution until someone else agrees to update it. + +When a program changes only a little, you may feel that the +discrepancies are small enough that the man page remains useful without +updating. If so, put a prominent note near the beginning of the man +page explaining that you don't maintain it and that the Texinfo manual +is more authoritative. The note should say how to access the Texinfo +documentation. + +@node Reading other Manuals +@section Reading other Manuals + +There may be non-free books or documentation files that describe the +program you are documenting. + +It is ok to use these documents for reference, just as the author of a +new algebra textbook can read other books on algebra. A large portion +of any non-fiction book consists of facts, in this case facts about how +a certain program works, and these facts are necessarily the same for +everyone who writes about the subject. But be careful not to copy your +outline structure, wording, tables or examples from preexisting non-free +documentation. Copying from free documentation may be ok; please check +with the FSF about the individual case. + +@node Managing Releases +@chapter The Release Process + +Making a release is more than just bundling up your source files in a +tar file and putting it up for FTP. You should set up your software so +that it can be configured to run on a variety of systems. Your Makefile +should conform to the GNU standards described below, and your directory +layout should also conform to the standards discussed below. Doing so +makes it easy to include your package into the larger framework of +all GNU software. + +@menu +* Configuration:: How Configuration Should Work +* Makefile Conventions:: Makefile Conventions +* Releases:: Making Releases +@end menu + +@node Configuration +@section How Configuration Should Work + +Each GNU distribution should come with a shell script named +@code{configure}. This script is given arguments which describe the +kind of machine and system you want to compile the program for. + +The @code{configure} script must record the configuration options so +that they affect compilation. + +One way to do this is to make a link from a standard name such as +@file{config.h} to the proper configuration file for the chosen system. +If you use this technique, the distribution should @emph{not} contain a +file named @file{config.h}. This is so that people won't be able to +build the program without configuring it first. + +Another thing that @code{configure} can do is to edit the Makefile. If +you do this, the distribution should @emph{not} contain a file named +@file{Makefile}. Instead, it should include a file @file{Makefile.in} which +contains the input used for editing. Once again, this is so that people +won't be able to build the program without configuring it first. + +If @code{configure} does write the @file{Makefile}, then @file{Makefile} +should have a target named @file{Makefile} which causes @code{configure} +to be rerun, setting up the same configuration that was set up last +time. The files that @code{configure} reads should be listed as +dependencies of @file{Makefile}. + +All the files which are output from the @code{configure} script should +have comments at the beginning explaining that they were generated +automatically using @code{configure}. This is so that users won't think +of trying to edit them by hand. + +The @code{configure} script should write a file named @file{config.status} +which describes which configuration options were specified when the +program was last configured. This file should be a shell script which, +if run, will recreate the same configuration. + +The @code{configure} script should accept an option of the form +@samp{--srcdir=@var{dirname}} to specify the directory where sources are found +(if it is not the current directory). This makes it possible to build +the program in a separate directory, so that the actual source directory +is not modified. + +If the user does not specify @samp{--srcdir}, then @code{configure} should +check both @file{.} and @file{..} to see if it can find the sources. If +it finds the sources in one of these places, it should use them from +there. Otherwise, it should report that it cannot find the sources, and +should exit with nonzero status. + +Usually the easy way to support @samp{--srcdir} is by editing a +definition of @code{VPATH} into the Makefile. Some rules may need to +refer explicitly to the specified source directory. To make this +possible, @code{configure} can add to the Makefile a variable named +@code{srcdir} whose value is precisely the specified directory. + +The @code{configure} script should also take an argument which specifies the +type of system to build the program for. This argument should look like +this: + +@example +@var{cpu}-@var{company}-@var{system} +@end example + +For example, a Sun 3 might be @samp{m68k-sun-sunos4.1}. + +The @code{configure} script needs to be able to decode all plausible +alternatives for how to describe a machine. Thus, @samp{sun3-sunos4.1} +would be a valid alias. For many programs, @samp{vax-dec-ultrix} would +be an alias for @samp{vax-dec-bsd}, simply because the differences +between Ultrix and @sc{BSD} are rarely noticeable, but a few programs +might need to distinguish them. +@c Real 4.4BSD now runs on some Suns. + +There is a shell script called @file{config.sub} that you can use +as a subroutine to validate system types and canonicalize aliases. + +Other options are permitted to specify in more detail the software +or hardware present on the machine, and include or exclude optional +parts of the package: + +@table @samp +@item --enable-@var{feature}@r{[}=@var{parameter}@r{]} +Configure the package to build and install an optional user-level +facility called @var{feature}. This allows users to choose which +optional features to include. Giving an optional @var{parameter} of +@samp{no} should omit @var{feature}, if it is built by default. + +No @samp{--enable} option should @strong{ever} cause one feature to +replace another. No @samp{--enable} option should ever substitute one +useful behavior for another useful behavior. The only proper use for +@samp{--enable} is for questions of whether to build part of the program +or exclude it. + +@item --with-@var{package} +@c @r{[}=@var{parameter}@r{]} +The package @var{package} will be installed, so configure this package +to work with @var{package}. + +@c Giving an optional @var{parameter} of +@c @samp{no} should omit @var{package}, if it is used by default. + +Possible values of @var{package} include +@samp{gnu-as} (or @samp{gas}), @samp{gnu-ld}, @samp{gnu-libc}, +@samp{gdb}, +@samp{x}, +and +@samp{x-toolkit}. + +Do not use a @samp{--with} option to specify the file name to use to +find certain files. That is outside the scope of what @samp{--with} +options are for. + +@item --nfp +The target machine has no floating point processor. + +@item --gas +The target machine assembler is GAS, the GNU assembler. +This is obsolete; users should use @samp{--with-gnu-as} instead. + +@item --x +The target machine has the X Window System installed. +This is obsolete; users should use @samp{--with-x} instead. +@end table + +All @code{configure} scripts should accept all of these ``detail'' +options, whether or not they make any difference to the particular +package at hand. In particular, they should accept any option that +starts with @samp{--with-} or @samp{--enable-}. This is so users will +be able to configure an entire GNU source tree at once with a single set +of options. + +You will note that the categories @samp{--with-} and @samp{--enable-} +are narrow: they @strong{do not} provide a place for any sort of option +you might think of. That is deliberate. We want to limit the possible +configuration options in GNU software. We do not want GNU programs to +have idiosyncratic configuration options. + +Packages that perform part of the compilation process may support cross-compilation. +In such a case, the host and target machines for the program may be +different. The @code{configure} script should normally treat the +specified type of system as both the host and the target, thus producing +a program which works for the same type of machine that it runs on. + +The way to build a cross-compiler, cross-assembler, or what have you, is +to specify the option @samp{--host=@var{hosttype}} when running +@code{configure}. This specifies the host system without changing the +type of target system. The syntax for @var{hosttype} is the same as +described above. + +Bootstrapping a cross-compiler requires compiling it on a machine other +than the host it will run on. Compilation packages accept a +configuration option @samp{--build=@var{hosttype}} for specifying the +configuration on which you will compile them, in case that is different +from the host. + +Programs for which cross-operation is not meaningful need not accept the +@samp{--host} option, because configuring an entire operating system for +cross-operation is not a meaningful thing. + +Some programs have ways of configuring themselves automatically. If +your program is set up to do this, your @code{configure} script can simply +ignore most of its arguments. + +@comment The makefile standards are in a separate file that is also +@comment included by make.texinfo. Done by roland@gnu.ai.mit.edu on 1/6/93. +@comment For this document, turn chapters into sections, etc. +@lowersections +@include make-stds.texi +@raisesections + +@node Releases +@section Making Releases + +Package the distribution of @code{Foo version 69.96} up in a gzipped tar +file with the name @file{foo-69.96.tar.gz}. It should unpack into a +subdirectory named @file{foo-69.96}. + +Building and installing the program should never modify any of the files +contained in the distribution. This means that all the files that form +part of the program in any way must be classified into @dfn{source +files} and @dfn{non-source files}. Source files are written by humans +and never changed automatically; non-source files are produced from +source files by programs under the control of the Makefile. + +Naturally, all the source files must be in the distribution. It is okay +to include non-source files in the distribution, provided they are +up-to-date and machine-independent, so that building the distribution +normally will never modify them. We commonly include non-source files +produced by Bison, @code{lex}, @TeX{}, and @code{makeinfo}; this helps avoid +unnecessary dependencies between our distributions, so that users can +install whichever packages they want to install. + +Non-source files that might actually be modified by building and +installing the program should @strong{never} be included in the +distribution. So if you do distribute non-source files, always make +sure they are up to date when you make a new distribution. + +Make sure that the directory into which the distribution unpacks (as +well as any subdirectories) are all world-writable (octal mode 777). +This is so that old versions of @code{tar} which preserve the +ownership and permissions of the files from the tar archive will be +able to extract all the files even if the user is unprivileged. + +Make sure that all the files in the distribution are world-readable. + +Make sure that no file name in the distribution is more than 14 +characters long. Likewise, no file created by building the program +should have a name longer than 14 characters. The reason for this is +that some systems adhere to a foolish interpretation of the POSIX +standard, and refuse to open a longer name, rather than truncating as +they did in the past. + +Don't include any symbolic links in the distribution itself. If the tar +file contains symbolic links, then people cannot even unpack it on +systems that don't support symbolic links. Also, don't use multiple +names for one file in different directories, because certain file +systems cannot handle this and that prevents unpacking the +distribution. + +Try to make sure that all the file names will be unique on MS-DOS. A +name on MS-DOS consists of up to 8 characters, optionally followed by a +period and up to three characters. MS-DOS will truncate extra +characters both before and after the period. Thus, +@file{foobarhacker.c} and @file{foobarhacker.o} are not ambiguous; they +are truncated to @file{foobarha.c} and @file{foobarha.o}, which are +distinct. + +Include in your distribution a copy of the @file{texinfo.tex} you used +to test print any @file{*.texinfo} or @file{*.texi} files. + +Likewise, if your program uses small GNU software packages like regex, +getopt, obstack, or termcap, include them in the distribution file. +Leaving them out would make the distribution file a little smaller at +the expense of possible inconvenience to a user who doesn't know what +other files to get. + +@contents + +@bye +Local variables: +update-date-leading-regexp: "@c This date is automagically updated when you save this file:\n@set lastupdate " +update-date-trailing-regexp: "" +eval: (load "/gd/gnuorg/update-date.el") +eval: (add-hook 'write-file-hooks 'update-date) +End: Index: standards.info =================================================================== --- standards.info (nonexistent) +++ standards.info (revision 1765) @@ -0,0 +1,3832 @@ +This is standards.info, produced by Makeinfo version 3.12f from +./standards.texi. + +START-INFO-DIR-ENTRY +* Standards: (standards). GNU coding standards. +END-INFO-DIR-ENTRY + + GNU Coding Standards Copyright (C) 1992, 1993, 1994, 1995, 1996, +1997, 1998 Free Software Foundation, Inc. + + Permission is granted to make and distribute verbatim copies of this +manual provided the copyright notice and this permission notice are +preserved on all copies. + + Permission is granted to copy and distribute modified versions of +this manual under the conditions for verbatim copying, provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + + Permission is granted to copy and distribute translations of this +manual into another language, under the above conditions for modified +versions, except that this permission notice may be stated in a +translation approved by the Free Software Foundation. + + +File: standards.info, Node: Top, Next: Preface, Prev: (dir), Up: (dir) + +Version +******* + + Last updated March 13, 1998. + +* Menu: + +* Preface:: About the GNU Coding Standards +* Intellectual Property:: Keeping Free Software Free +* Design Advice:: General Program Design +* Program Behavior:: Program Behavior for All Programs +* Writing C:: Making The Best Use of C +* Documentation:: Documenting Programs +* Managing Releases:: The Release Process + + +File: standards.info, Node: Preface, Next: Intellectual Property, Prev: Top, Up: Top + +About the GNU Coding Standards +****************************** + + The GNU Coding Standards were written by Richard Stallman and other +GNU Project volunteers. Their purpose is to make the GNU system clean, +consistent, and easy to install. This document can also be read as a +guide to writing portable, robust and reliable programs. It focuses on +programs written in C, but many of the rules and principles are useful +even if you write in another programming language. The rules often +state reasons for writing in a certain way. + + Corrections or suggestions for this document should be sent to +. If you make a suggestion, please include a suggested +new wording for it; our time is limited. We prefer a context diff to +the `standards.texi' or `make-stds.texi' files, but if you don't have +those files, please mail your suggestion anyway. + + This release of the GNU Coding Standards was last updated March 13, +1998. + + +File: standards.info, Node: Intellectual Property, Next: Design Advice, Prev: Preface, Up: Top + +Keeping Free Software Free +************************** + + This node discusses how you can make sure that GNU software remains +unencumbered. + +* Menu: + +* Reading Non-Free Code:: Referring to Proprietary Programs +* Contributions:: Accepting Contributions + + +File: standards.info, Node: Reading Non-Free Code, Next: Contributions, Up: Intellectual Property + +Referring to Proprietary Programs +================================= + + Don't in any circumstances refer to Unix source code for or during +your work on GNU! (Or to any other proprietary programs.) + + If you have a vague recollection of the internals of a Unix program, +this does not absolutely mean you can't write an imitation of it, but +do try to organize the imitation internally along different lines, +because this is likely to make the details of the Unix version +irrelevant and dissimilar to your results. + + For example, Unix utilities were generally optimized to minimize +memory use; if you go for speed instead, your program will be very +different. You could keep the entire input file in core and scan it +there instead of using stdio. Use a smarter algorithm discovered more +recently than the Unix program. Eliminate use of temporary files. Do +it in one pass instead of two (we did this in the assembler). + + Or, on the contrary, emphasize simplicity instead of speed. For some +applications, the speed of today's computers makes simpler algorithms +adequate. + + Or go for generality. For example, Unix programs often have static +tables or fixed-size strings, which make for arbitrary limits; use +dynamic allocation instead. Make sure your program handles NULs and +other funny characters in the input files. Add a programming language +for extensibility and write part of the program in that language. + + Or turn some parts of the program into independently usable +libraries. Or use a simple garbage collector instead of tracking +precisely when to free memory, or use a new GNU facility such as +obstacks. + + +File: standards.info, Node: Contributions, Prev: Reading Non-Free Code, Up: Intellectual Property + +Accepting Contributions +======================= + + If someone else sends you a piece of code to add to the program you +are working on, we need legal papers to use it--the same sort of legal +papers we will need to get from you. _Each_ significant contributor to +a program must sign some sort of legal papers in order for us to have +clear title to the program. The main author alone is not enough. + + So, before adding in any contributions from other people, please tell +us, so we can arrange to get the papers. Then wait until we tell you +that we have received the signed papers, before you actually use the +contribution. + + This applies both before you release the program and afterward. If +you receive diffs to fix a bug, and they make significant changes, we +need legal papers for that change. + + This also applies to comments and documentation files. For copyright +law, comments and code are just text. Copyright applies to all kinds of +text, so we need legal papers for all kinds. + + You don't need papers for changes of a few lines here or there, since +they are not significant for copyright purposes. Also, you don't need +papers if all you get from the suggestion is some ideas, not actual code +which you use. For example, if you write a different solution to the +problem, you don't need to get papers. + + We know this is frustrating; it's frustrating for us as well. But if +you don't wait, you are going out on a limb--for example, what if the +contributor's employer won't sign a disclaimer? You might have to take +that code out again! + + The very worst thing is if you forget to tell us about the other +contributor. We could be very embarrassed in court some day as a +result. + + We have more detailed advice for maintainers of programs; if you have +reached the stage of actually maintaining a program for GNU (whether +released or not), please ask us for a copy. + + +File: standards.info, Node: Design Advice, Next: Program Behavior, Prev: Intellectual Property, Up: Top + +General Program Design +********************** + + This node discusses some of the issues you should take into account +when designing your program. + +* Menu: + +* Compatibility:: Compatibility with other implementations +* Using Extensions:: Using non-standard features +* ANSI C:: Using ANSI C features +* Source Language:: Using languages other than C + + +File: standards.info, Node: Compatibility, Next: Using Extensions, Up: Design Advice + +Compatibility with Other Implementations +======================================== + + With occasional exceptions, utility programs and libraries for GNU +should be upward compatible with those in Berkeley Unix, and upward +compatible with ANSI C if ANSI C specifies their behavior, and upward +compatible with POSIX if POSIX specifies their behavior. + + When these standards conflict, it is useful to offer compatibility +modes for each of them. + + ANSI C and POSIX prohibit many kinds of extensions. Feel free to +make the extensions anyway, and include a `--ansi', `--posix', or +`--compatible' option to turn them off. However, if the extension has +a significant chance of breaking any real programs or scripts, then it +is not really upward compatible. Try to redesign its interface. + + Many GNU programs suppress extensions that conflict with POSIX if the +environment variable `POSIXLY_CORRECT' is defined (even if it is +defined with a null value). Please make your program recognize this +variable if appropriate. + + When a feature is used only by users (not by programs or command +files), and it is done poorly in Unix, feel free to replace it +completely with something totally different and better. (For example, +`vi' is replaced with Emacs.) But it is nice to offer a compatible +feature as well. (There is a free `vi' clone, so we offer it.) + + Additional useful features not in Berkeley Unix are welcome. + + +File: standards.info, Node: Using Extensions, Next: ANSI C, Prev: Compatibility, Up: Design Advice + +Using Non-standard Features +=========================== + + Many GNU facilities that already exist support a number of convenient +extensions over the comparable Unix facilities. Whether to use these +extensions in implementing your program is a difficult question. + + On the one hand, using the extensions can make a cleaner program. +On the other hand, people will not be able to build the program unless +the other GNU tools are available. This might cause the program to +work on fewer kinds of machines. + + With some extensions, it might be easy to provide both alternatives. +For example, you can define functions with a "keyword" `INLINE' and +define that as a macro to expand into either `inline' or nothing, +depending on the compiler. + + In general, perhaps it is best not to use the extensions if you can +straightforwardly do without them, but to use the extensions if they +are a big improvement. + + An exception to this rule are the large, established programs (such +as Emacs) which run on a great variety of systems. Such programs would +be broken by use of GNU extensions. + + Another exception is for programs that are used as part of +compilation: anything that must be compiled with other compilers in +order to bootstrap the GNU compilation facilities. If these require +the GNU compiler, then no one can compile them without having them +installed already. That would be no good. + + +File: standards.info, Node: ANSI C, Next: Source Language, Prev: Using Extensions, Up: Design Advice + +ANSI C and pre-ANSI C +===================== + + Do not ever use the "trigraph" feature of ANSI C. + + ANSI C is widespread enough now that it is ok to write new programs +that use ANSI C features (and therefore will not work in non-ANSI +compilers). And if a program is already written in ANSI C, there's no +need to convert it to support non-ANSI compilers. + + However, it is easy to support non-ANSI compilers in most programs, +so you might still consider doing so when you write a program. Instead +of writing function definitions in ANSI prototype form, + + int + foo (int x, int y) + ... + +write the definition in pre-ANSI style like this, + + int + foo (x, y) + int x, y; + ... + +and use a separate declaration to specify the argument prototype: + + int foo (int, int); + + You need such a declaration anyway, in a header file, to get the +benefit of ANSI C prototypes in all the files where the function is +called. And once you have it, you lose nothing by writing the function +definition in the pre-ANSI style. + + If you don't know non-ANSI C, there's no need to learn it; just +write in ANSI C. + + +File: standards.info, Node: Source Language, Prev: ANSI C, Up: Design Advice + +Using Languages Other Than C +============================ + + Using a language other than C is like using a non-standard feature: +it will cause trouble for users. Even if GCC supports the other +language, users may find it inconvenient to have to install the +compiler for that other language in order to build your program. For +example, if you write your program in C++, people will have to install +the C++ compiler in order to compile your program. Thus, it is better +if you write in C. + + But there are three situations when there is no disadvantage in using +some other language: + + * It is okay to use another language if your program contains an + interpreter for that language. + + For example, if your program links with GUILE, it is ok to write + part of the program in Scheme or another language supported by + GUILE. + + * It is okay to use another language in a tool specifically intended + for use with that language. + + This is okay because the only people who want to build the tool + will be those who have installed the other language anyway. + + * If an application is of interest to a narrow community, then + perhaps it's not important if the application is inconvenient to + install. + + C has one other advantage over C++ and other compiled languages: more +people know C, so more people will find it easy to read and modify the +program if it is written in C. + + +File: standards.info, Node: Program Behavior, Next: Writing C, Prev: Design Advice, Up: Top + +Program Behavior for All Programs +********************************* + + This node describes how to write robust software. It also describes +general standards for error messages, the command line interface, and +how libraries should behave. + +* Menu: + +* Semantics:: Writing robust programs +* Libraries:: Library behavior +* Errors:: Formatting error messages +* User Interfaces:: Standards for command line interfaces +* Option Table:: Table of long options. +* Memory Usage:: When and how to care about memory needs + + +File: standards.info, Node: Semantics, Next: Libraries, Up: Program Behavior + +Writing Robust Programs +======================= + + Avoid arbitrary limits on the length or number of _any_ data +structure, including file names, lines, files, and symbols, by +allocating all data structures dynamically. In most Unix utilities, +"long lines are silently truncated". This is not acceptable in a GNU +utility. + + Utilities reading files should not drop NUL characters, or any other +nonprinting characters _including those with codes above 0177_. The +only sensible exceptions would be utilities specifically intended for +interface to certain types of printers that can't handle those +characters. + + Check every system call for an error return, unless you know you +wish to ignore errors. Include the system error text (from `perror' or +equivalent) in _every_ error message resulting from a failing system +call, as well as the name of the file if any and the name of the +utility. Just "cannot open foo.c" or "stat failed" is not sufficient. + + Check every call to `malloc' or `realloc' to see if it returned +zero. Check `realloc' even if you are making the block smaller; in a +system that rounds block sizes to a power of 2, `realloc' may get a +different block if you ask for less space. + + In Unix, `realloc' can destroy the storage block if it returns zero. +GNU `realloc' does not have this bug: if it fails, the original block +is unchanged. Feel free to assume the bug is fixed. If you wish to +run your program on Unix, and wish to avoid lossage in this case, you +can use the GNU `malloc'. + + You must expect `free' to alter the contents of the block that was +freed. Anything you want to fetch from the block, you must fetch before +calling `free'. + + If `malloc' fails in a noninteractive program, make that a fatal +error. In an interactive program (one that reads commands from the +user), it is better to abort the command and return to the command +reader loop. This allows the user to kill other processes to free up +virtual memory, and then try the command again. + + Use `getopt_long' to decode arguments, unless the argument syntax +makes this unreasonable. + + When static storage is to be written in during program execution, use +explicit C code to initialize it. Reserve C initialized declarations +for data that will not be changed. + + Try to avoid low-level interfaces to obscure Unix data structures +(such as file directories, utmp, or the layout of kernel memory), since +these are less likely to work compatibly. If you need to find all the +files in a directory, use `readdir' or some other high-level interface. +These will be supported compatibly by GNU. + + By default, the GNU system will provide the signal handling +functions of BSD and of POSIX. So GNU software should be written to use +these. + + In error checks that detect "impossible" conditions, just abort. +There is usually no point in printing any message. These checks +indicate the existence of bugs. Whoever wants to fix the bugs will have +to read the source code and run a debugger. So explain the problem with +comments in the source. The relevant data will be in variables, which +are easy to examine with the debugger, so there is no point moving them +elsewhere. + + Do not use a count of errors as the exit status for a program. +_That does not work_, because exit status values are limited to 8 bits +(0 through 255). A single run of the program might have 256 errors; if +you try to return 256 as the exit status, the parent process will see 0 +as the status, and it will appear that the program succeeded. + + If you make temporary files, check the `TMPDIR' environment +variable; if that variable is defined, use the specified directory +instead of `/tmp'. + + +File: standards.info, Node: Libraries, Next: Errors, Prev: Semantics, Up: Program Behavior + +Library Behavior +================ + + Try to make library functions reentrant. If they need to do dynamic +storage allocation, at least try to avoid any nonreentrancy aside from +that of `malloc' itself. + + Here are certain name conventions for libraries, to avoid name +conflicts. + + Choose a name prefix for the library, more than two characters long. +All external function and variable names should start with this prefix. +In addition, there should only be one of these in any given library +member. This usually means putting each one in a separate source file. + + An exception can be made when two external symbols are always used +together, so that no reasonable program could use one without the +other; then they can both go in the same file. + + External symbols that are not documented entry points for the user +should have names beginning with `_'. They should also contain the +chosen name prefix for the library, to prevent collisions with other +libraries. These can go in the same files with user entry points if +you like. + + Static functions and variables can be used as you like and need not +fit any naming convention. + + +File: standards.info, Node: Errors, Next: User Interfaces, Prev: Libraries, Up: Program Behavior + +Formatting Error Messages +========================= + + Error messages from compilers should look like this: + + SOURCE-FILE-NAME:LINENO: MESSAGE + + Error messages from other noninteractive programs should look like +this: + + PROGRAM:SOURCE-FILE-NAME:LINENO: MESSAGE + +when there is an appropriate source file, or like this: + + PROGRAM: MESSAGE + +when there is no relevant source file. + + In an interactive program (one that is reading commands from a +terminal), it is better not to include the program name in an error +message. The place to indicate which program is running is in the +prompt or with the screen layout. (When the same program runs with +input from a source other than a terminal, it is not interactive and +would do best to print error messages using the noninteractive style.) + + The string MESSAGE should not begin with a capital letter when it +follows a program name and/or file name. Also, it should not end with +a period. + + Error messages from interactive programs, and other messages such as +usage messages, should start with a capital letter. But they should not +end with a period. + + +File: standards.info, Node: User Interfaces, Next: Option Table, Prev: Errors, Up: Program Behavior + +Standards for Command Line Interfaces +===================================== + + Please don't make the behavior of a utility depend on the name used +to invoke it. It is useful sometimes to make a link to a utility with +a different name, and that should not change what it does. + + Instead, use a run time option or a compilation switch or both to +select among the alternate behaviors. + + Likewise, please don't make the behavior of the program depend on the +type of output device it is used with. Device independence is an +important principle of the system's design; do not compromise it merely +to save someone from typing an option now and then. + + If you think one behavior is most useful when the output is to a +terminal, and another is most useful when the output is a file or a +pipe, then it is usually best to make the default behavior the one that +is useful with output to a terminal, and have an option for the other +behavior. + + Compatibility requires certain programs to depend on the type of +output device. It would be disastrous if `ls' or `sh' did not do so in +the way all users expect. In some of these cases, we supplement the +program with a preferred alternate version that does not depend on the +output device type. For example, we provide a `dir' program much like +`ls' except that its default output format is always multi-column +format. + + It is a good idea to follow the POSIX guidelines for the +command-line options of a program. The easiest way to do this is to use +`getopt' to parse them. Note that the GNU version of `getopt' will +normally permit options anywhere among the arguments unless the special +argument `--' is used. This is not what POSIX specifies; it is a GNU +extension. + + Please define long-named options that are equivalent to the +single-letter Unix-style options. We hope to make GNU more user +friendly this way. This is easy to do with the GNU function +`getopt_long'. + + One of the advantages of long-named options is that they can be +consistent from program to program. For example, users should be able +to expect the "verbose" option of any GNU program which has one, to be +spelled precisely `--verbose'. To achieve this uniformity, look at the +table of common long-option names when you choose the option names for +your program (*note Option Table::.). + + It is usually a good idea for file names given as ordinary arguments +to be input files only; any output files would be specified using +options (preferably `-o' or `--output'). Even if you allow an output +file name as an ordinary argument for compatibility, try to provide an +option as another way to specify it. This will lead to more consistency +among GNU utilities, and fewer idiosyncracies for users to remember. + + All programs should support two standard options: `--version' and +`--help'. + +`--version' + This option should direct the program to information about its + name, version, origin and legal status, all on standard output, + and then exit successfully. Other options and arguments should be + ignored once this is seen, and the program should not perform its + normal function. + + The first line is meant to be easy for a program to parse; the + version number proper starts after the last space. In addition, + it contains the canonical name for this program, in this format: + + GNU Emacs 19.30 + + The program's name should be a constant string; _don't_ compute it + from `argv[0]'. The idea is to state the standard or canonical + name for the program, not its file name. There are other ways to + find out the precise file name where a command is found in `PATH'. + + If the program is a subsidiary part of a larger package, mention + the package name in parentheses, like this: + + emacsserver (GNU Emacs) 19.30 + + If the package has a version number which is different from this + program's version number, you can mention the package version + number just before the close-parenthesis. + + If you *need* to mention the version numbers of libraries which + are distributed separately from the package which contains this + program, you can do so by printing an additional line of version + info for each library you want to mention. Use the same format + for these lines as for the first line. + + Please do not mention all of the libraries that the program uses + "just for completeness"--that would produce a lot of unhelpful + clutter. Please mention library version numbers only if you find + in practice that they are very important to you in debugging. + + The following line, after the version number line or lines, should + be a copyright notice. If more than one copyright notice is + called for, put each on a separate line. + + Next should follow a brief statement that the program is free + software, and that users are free to copy and change it on certain + conditions. If the program is covered by the GNU GPL, say so + here. Also mention that there is no warranty, to the extent + permitted by law. + + It is ok to finish the output with a list of the major authors of + the program, as a way of giving credit. + + Here's an example of output that follows these rules: + + GNU Emacs 19.34.5 + Copyright (C) 1996 Free Software Foundation, Inc. + GNU Emacs comes with NO WARRANTY, + to the extent permitted by law. + You may redistribute copies of GNU Emacs + under the terms of the GNU General Public License. + For more information about these matters, + see the files named COPYING. + + You should adapt this to your program, of course, filling in the + proper year, copyright holder, name of program, and the references + to distribution terms, and changing the rest of the wording as + necessary. + + This copyright notice only needs to mention the most recent year in + which changes were made--there's no need to list the years for + previous versions' changes. You don't have to mention the name of + the program in these notices, if that is inconvenient, since it + appeared in the first line. + +`--help' + This option should output brief documentation for how to invoke the + program, on standard output, then exit successfully. Other + options and arguments should be ignored once this is seen, and the + program should not perform its normal function. + + Near the end of the `--help' option's output there should be a line + that says where to mail bug reports. It should have this format: + + Report bugs to MAILING-ADDRESS. + + +File: standards.info, Node: Option Table, Next: Memory Usage, Prev: User Interfaces, Up: Program Behavior + +Table of Long Options +===================== + + Here is a table of long options used by GNU programs. It is surely +incomplete, but we aim to list all the options that a new program might +want to be compatible with. If you use names not already in the table, +please send a list of them, with their meanings, so we +can update the table. + +`after-date' + `-N' in `tar'. + +`all' + `-a' in `du', `ls', `nm', `stty', `uname', and `unexpand'. + +`all-text' + `-a' in `diff'. + +`almost-all' + `-A' in `ls'. + +`append' + `-a' in `etags', `tee', `time'; `-r' in `tar'. + +`archive' + `-a' in `cp'. + +`archive-name' + `-n' in `shar'. + +`arglength' + `-l' in `m4'. + +`ascii' + `-a' in `diff'. + +`assign' + `-v' in `gawk'. + +`assume-new' + `-W' in Make. + +`assume-old' + `-o' in Make. + +`auto-check' + `-a' in `recode'. + +`auto-pager' + `-a' in `wdiff'. + +`auto-reference' + `-A' in `ptx'. + +`avoid-wraps' + `-n' in `wdiff'. + +`backward-search' + `-B' in `ctags'. + +`basename' + `-f' in `shar'. + +`batch' + Used in GDB. + +`baud' + Used in GDB. + +`before' + `-b' in `tac'. + +`binary' + `-b' in `cpio' and `diff'. + +`bits-per-code' + `-b' in `shar'. + +`block-size' + Used in `cpio' and `tar'. + +`blocks' + `-b' in `head' and `tail'. + +`break-file' + `-b' in `ptx'. + +`brief' + Used in various programs to make output shorter. + +`bytes' + `-c' in `head', `split', and `tail'. + +`c++' + `-C' in `etags'. + +`catenate' + `-A' in `tar'. + +`cd' + Used in various programs to specify the directory to use. + +`changes' + `-c' in `chgrp' and `chown'. + +`classify' + `-F' in `ls'. + +`colons' + `-c' in `recode'. + +`command' + `-c' in `su'; `-x' in GDB. + +`compare' + `-d' in `tar'. + +`compat' + Used in `gawk'. + +`compress' + `-Z' in `tar' and `shar'. + +`concatenate' + `-A' in `tar'. + +`confirmation' + `-w' in `tar'. + +`context' + Used in `diff'. + +`copyleft' + `-W copyleft' in `gawk'. + +`copyright' + `-C' in `ptx', `recode', and `wdiff'; `-W copyright' in `gawk'. + +`core' + Used in GDB. + +`count' + `-q' in `who'. + +`count-links' + `-l' in `du'. + +`create' + Used in `tar' and `cpio'. + +`cut-mark' + `-c' in `shar'. + +`cxref' + `-x' in `ctags'. + +`date' + `-d' in `touch'. + +`debug' + `-d' in Make and `m4'; `-t' in Bison. + +`define' + `-D' in `m4'. + +`defines' + `-d' in Bison and `ctags'. + +`delete' + `-D' in `tar'. + +`dereference' + `-L' in `chgrp', `chown', `cpio', `du', `ls', and `tar'. + +`dereference-args' + `-D' in `du'. + +`diacritics' + `-d' in `recode'. + +`dictionary-order' + `-d' in `look'. + +`diff' + `-d' in `tar'. + +`digits' + `-n' in `csplit'. + +`directory' + Specify the directory to use, in various programs. In `ls', it + means to show directories themselves rather than their contents. + In `rm' and `ln', it means to not treat links to directories + specially. + +`discard-all' + `-x' in `strip'. + +`discard-locals' + `-X' in `strip'. + +`dry-run' + `-n' in Make. + +`ed' + `-e' in `diff'. + +`elide-empty-files' + `-z' in `csplit'. + +`end-delete' + `-x' in `wdiff'. + +`end-insert' + `-z' in `wdiff'. + +`entire-new-file' + `-N' in `diff'. + +`environment-overrides' + `-e' in Make. + +`eof' + `-e' in `xargs'. + +`epoch' + Used in GDB. + +`error-limit' + Used in `makeinfo'. + +`error-output' + `-o' in `m4'. + +`escape' + `-b' in `ls'. + +`exclude-from' + `-X' in `tar'. + +`exec' + Used in GDB. + +`exit' + `-x' in `xargs'. + +`exit-0' + `-e' in `unshar'. + +`expand-tabs' + `-t' in `diff'. + +`expression' + `-e' in `sed'. + +`extern-only' + `-g' in `nm'. + +`extract' + `-i' in `cpio'; `-x' in `tar'. + +`faces' + `-f' in `finger'. + +`fast' + `-f' in `su'. + +`fatal-warnings' + `-E' in `m4'. + +`file' + `-f' in `info', `gawk', Make, `mt', and `tar'; `-n' in `sed'; `-r' + in `touch'. + +`field-separator' + `-F' in `gawk'. + +`file-prefix' + `-b' in Bison. + +`file-type' + `-F' in `ls'. + +`files-from' + `-T' in `tar'. + +`fill-column' + Used in `makeinfo'. + +`flag-truncation' + `-F' in `ptx'. + +`fixed-output-files' + `-y' in Bison. + +`follow' + `-f' in `tail'. + +`footnote-style' + Used in `makeinfo'. + +`force' + `-f' in `cp', `ln', `mv', and `rm'. + +`force-prefix' + `-F' in `shar'. + +`format' + Used in `ls', `time', and `ptx'. + +`freeze-state' + `-F' in `m4'. + +`fullname' + Used in GDB. + +`gap-size' + `-g' in `ptx'. + +`get' + `-x' in `tar'. + +`graphic' + `-i' in `ul'. + +`graphics' + `-g' in `recode'. + +`group' + `-g' in `install'. + +`gzip' + `-z' in `tar' and `shar'. + +`hashsize' + `-H' in `m4'. + +`header' + `-h' in `objdump' and `recode' + +`heading' + `-H' in `who'. + +`help' + Used to ask for brief usage information. + +`here-delimiter' + `-d' in `shar'. + +`hide-control-chars' + `-q' in `ls'. + +`idle' + `-u' in `who'. + +`ifdef' + `-D' in `diff'. + +`ignore' + `-I' in `ls'; `-x' in `recode'. + +`ignore-all-space' + `-w' in `diff'. + +`ignore-backups' + `-B' in `ls'. + +`ignore-blank-lines' + `-B' in `diff'. + +`ignore-case' + `-f' in `look' and `ptx'; `-i' in `diff' and `wdiff'. + +`ignore-errors' + `-i' in Make. + +`ignore-file' + `-i' in `ptx'. + +`ignore-indentation' + `-I' in `etags'. + +`ignore-init-file' + `-f' in Oleo. + +`ignore-interrupts' + `-i' in `tee'. + +`ignore-matching-lines' + `-I' in `diff'. + +`ignore-space-change' + `-b' in `diff'. + +`ignore-zeros' + `-i' in `tar'. + +`include' + `-i' in `etags'; `-I' in `m4'. + +`include-dir' + `-I' in Make. + +`incremental' + `-G' in `tar'. + +`info' + `-i', `-l', and `-m' in Finger. + +`initial' + `-i' in `expand'. + +`initial-tab' + `-T' in `diff'. + +`inode' + `-i' in `ls'. + +`interactive' + `-i' in `cp', `ln', `mv', `rm'; `-e' in `m4'; `-p' in `xargs'; + `-w' in `tar'. + +`intermix-type' + `-p' in `shar'. + +`jobs' + `-j' in Make. + +`just-print' + `-n' in Make. + +`keep-going' + `-k' in Make. + +`keep-files' + `-k' in `csplit'. + +`kilobytes' + `-k' in `du' and `ls'. + +`language' + `-l' in `etags'. + +`less-mode' + `-l' in `wdiff'. + +`level-for-gzip' + `-g' in `shar'. + +`line-bytes' + `-C' in `split'. + +`lines' + Used in `split', `head', and `tail'. + +`link' + `-l' in `cpio'. + +`lint' +`lint-old' + Used in `gawk'. + +`list' + `-t' in `cpio'; `-l' in `recode'. + +`list' + `-t' in `tar'. + +`literal' + `-N' in `ls'. + +`load-average' + `-l' in Make. + +`login' + Used in `su'. + +`machine' + No listing of which programs already use this; someone should + check to see if any actually do, and tell . + +`macro-name' + `-M' in `ptx'. + +`mail' + `-m' in `hello' and `uname'. + +`make-directories' + `-d' in `cpio'. + +`makefile' + `-f' in Make. + +`mapped' + Used in GDB. + +`max-args' + `-n' in `xargs'. + +`max-chars' + `-n' in `xargs'. + +`max-lines' + `-l' in `xargs'. + +`max-load' + `-l' in Make. + +`max-procs' + `-P' in `xargs'. + +`mesg' + `-T' in `who'. + +`message' + `-T' in `who'. + +`minimal' + `-d' in `diff'. + +`mixed-uuencode' + `-M' in `shar'. + +`mode' + `-m' in `install', `mkdir', and `mkfifo'. + +`modification-time' + `-m' in `tar'. + +`multi-volume' + `-M' in `tar'. + +`name-prefix' + `-a' in Bison. + +`nesting-limit' + `-L' in `m4'. + +`net-headers' + `-a' in `shar'. + +`new-file' + `-W' in Make. + +`no-builtin-rules' + `-r' in Make. + +`no-character-count' + `-w' in `shar'. + +`no-check-existing' + `-x' in `shar'. + +`no-common' + `-3' in `wdiff'. + +`no-create' + `-c' in `touch'. + +`no-defines' + `-D' in `etags'. + +`no-deleted' + `-1' in `wdiff'. + +`no-dereference' + `-d' in `cp'. + +`no-inserted' + `-2' in `wdiff'. + +`no-keep-going' + `-S' in Make. + +`no-lines' + `-l' in Bison. + +`no-piping' + `-P' in `shar'. + +`no-prof' + `-e' in `gprof'. + +`no-regex' + `-R' in `etags'. + +`no-sort' + `-p' in `nm'. + +`no-split' + Used in `makeinfo'. + +`no-static' + `-a' in `gprof'. + +`no-time' + `-E' in `gprof'. + +`no-timestamp' + `-m' in `shar'. + +`no-validate' + Used in `makeinfo'. + +`no-wait' + Used in `emacsclient'. + +`no-warn' + Used in various programs to inhibit warnings. + +`node' + `-n' in `info'. + +`nodename' + `-n' in `uname'. + +`nonmatching' + `-f' in `cpio'. + +`nstuff' + `-n' in `objdump'. + +`null' + `-0' in `xargs'. + +`number' + `-n' in `cat'. + +`number-nonblank' + `-b' in `cat'. + +`numeric-sort' + `-n' in `nm'. + +`numeric-uid-gid' + `-n' in `cpio' and `ls'. + +`nx' + Used in GDB. + +`old-archive' + `-o' in `tar'. + +`old-file' + `-o' in Make. + +`one-file-system' + `-l' in `tar', `cp', and `du'. + +`only-file' + `-o' in `ptx'. + +`only-prof' + `-f' in `gprof'. + +`only-time' + `-F' in `gprof'. + +`output' + In various programs, specify the output file name. + +`output-prefix' + `-o' in `shar'. + +`override' + `-o' in `rm'. + +`overwrite' + `-c' in `unshar'. + +`owner' + `-o' in `install'. + +`paginate' + `-l' in `diff'. + +`paragraph-indent' + Used in `makeinfo'. + +`parents' + `-p' in `mkdir' and `rmdir'. + +`pass-all' + `-p' in `ul'. + +`pass-through' + `-p' in `cpio'. + +`port' + `-P' in `finger'. + +`portability' + `-c' in `cpio' and `tar'. + +`posix' + Used in `gawk'. + +`prefix-builtins' + `-P' in `m4'. + +`prefix' + `-f' in `csplit'. + +`preserve' + Used in `tar' and `cp'. + +`preserve-environment' + `-p' in `su'. + +`preserve-modification-time' + `-m' in `cpio'. + +`preserve-order' + `-s' in `tar'. + +`preserve-permissions' + `-p' in `tar'. + +`print' + `-l' in `diff'. + +`print-chars' + `-L' in `cmp'. + +`print-data-base' + `-p' in Make. + +`print-directory' + `-w' in Make. + +`print-file-name' + `-o' in `nm'. + +`print-symdefs' + `-s' in `nm'. + +`printer' + `-p' in `wdiff'. + +`prompt' + `-p' in `ed'. + +`query-user' + `-X' in `shar'. + +`question' + `-q' in Make. + +`quiet' + Used in many programs to inhibit the usual output. *Note:* every + program accepting `--quiet' should accept `--silent' as a synonym. + +`quiet-unshar' + `-Q' in `shar' + +`quote-name' + `-Q' in `ls'. + +`rcs' + `-n' in `diff'. + +`re-interval' + Used in `gawk'. + +`read-full-blocks' + `-B' in `tar'. + +`readnow' + Used in GDB. + +`recon' + `-n' in Make. + +`record-number' + `-R' in `tar'. + +`recursive' + Used in `chgrp', `chown', `cp', `ls', `diff', and `rm'. + +`reference-limit' + Used in `makeinfo'. + +`references' + `-r' in `ptx'. + +`regex' + `-r' in `tac' and `etags'. + +`release' + `-r' in `uname'. + +`reload-state' + `-R' in `m4'. + +`relocation' + `-r' in `objdump'. + +`rename' + `-r' in `cpio'. + +`replace' + `-i' in `xargs'. + +`report-identical-files' + `-s' in `diff'. + +`reset-access-time' + `-a' in `cpio'. + +`reverse' + `-r' in `ls' and `nm'. + +`reversed-ed' + `-f' in `diff'. + +`right-side-defs' + `-R' in `ptx'. + +`same-order' + `-s' in `tar'. + +`same-permissions' + `-p' in `tar'. + +`save' + `-g' in `stty'. + +`se' + Used in GDB. + +`sentence-regexp' + `-S' in `ptx'. + +`separate-dirs' + `-S' in `du'. + +`separator' + `-s' in `tac'. + +`sequence' + Used by `recode' to chose files or pipes for sequencing passes. + +`shell' + `-s' in `su'. + +`show-all' + `-A' in `cat'. + +`show-c-function' + `-p' in `diff'. + +`show-ends' + `-E' in `cat'. + +`show-function-line' + `-F' in `diff'. + +`show-tabs' + `-T' in `cat'. + +`silent' + Used in many programs to inhibit the usual output. *Note:* every + program accepting `--silent' should accept `--quiet' as a synonym. + +`size' + `-s' in `ls'. + +`sort' + Used in `ls'. + +`source' + `-W source' in `gawk'. + +`sparse' + `-S' in `tar'. + +`speed-large-files' + `-H' in `diff'. + +`split-at' + `-E' in `unshar'. + +`split-size-limit' + `-L' in `shar'. + +`squeeze-blank' + `-s' in `cat'. + +`start-delete' + `-w' in `wdiff'. + +`start-insert' + `-y' in `wdiff'. + +`starting-file' + Used in `tar' and `diff' to specify which file within a directory + to start processing with. + +`statistics' + `-s' in `wdiff'. + +`stdin-file-list' + `-S' in `shar'. + +`stop' + `-S' in Make. + +`strict' + `-s' in `recode'. + +`strip' + `-s' in `install'. + +`strip-all' + `-s' in `strip'. + +`strip-debug' + `-S' in `strip'. + +`submitter' + `-s' in `shar'. + +`suffix' + `-S' in `cp', `ln', `mv'. + +`suffix-format' + `-b' in `csplit'. + +`sum' + `-s' in `gprof'. + +`summarize' + `-s' in `du'. + +`symbolic' + `-s' in `ln'. + +`symbols' + Used in GDB and `objdump'. + +`synclines' + `-s' in `m4'. + +`sysname' + `-s' in `uname'. + +`tabs' + `-t' in `expand' and `unexpand'. + +`tabsize' + `-T' in `ls'. + +`terminal' + `-T' in `tput' and `ul'. `-t' in `wdiff'. + +`text' + `-a' in `diff'. + +`text-files' + `-T' in `shar'. + +`time' + Used in `ls' and `touch'. + +`to-stdout' + `-O' in `tar'. + +`total' + `-c' in `du'. + +`touch' + `-t' in Make, `ranlib', and `recode'. + +`trace' + `-t' in `m4'. + +`traditional' + `-t' in `hello'; `-W traditional' in `gawk'; `-G' in `ed', `m4', + and `ptx'. + +`tty' + Used in GDB. + +`typedefs' + `-t' in `ctags'. + +`typedefs-and-c++' + `-T' in `ctags'. + +`typeset-mode' + `-t' in `ptx'. + +`uncompress' + `-z' in `tar'. + +`unconditional' + `-u' in `cpio'. + +`undefine' + `-U' in `m4'. + +`undefined-only' + `-u' in `nm'. + +`update' + `-u' in `cp', `ctags', `mv', `tar'. + +`usage' + Used in `gawk'; same as `--help'. + +`uuencode' + `-B' in `shar'. + +`vanilla-operation' + `-V' in `shar'. + +`verbose' + Print more information about progress. Many programs support this. + +`verify' + `-W' in `tar'. + +`version' + Print the version number. + +`version-control' + `-V' in `cp', `ln', `mv'. + +`vgrind' + `-v' in `ctags'. + +`volume' + `-V' in `tar'. + +`what-if' + `-W' in Make. + +`whole-size-limit' + `-l' in `shar'. + +`width' + `-w' in `ls' and `ptx'. + +`word-regexp' + `-W' in `ptx'. + +`writable' + `-T' in `who'. + +`zeros' + `-z' in `gprof'. + + +File: standards.info, Node: Memory Usage, Prev: Option Table, Up: Program Behavior + +Memory Usage +============ + + If it typically uses just a few meg of memory, don't bother making +any effort to reduce memory usage. For example, if it is impractical +for other reasons to operate on files more than a few meg long, it is +reasonable to read entire input files into core to operate on them. + + However, for programs such as `cat' or `tail', that can usefully +operate on very large files, it is important to avoid using a technique +that would artificially limit the size of files it can handle. If a +program works by lines and could be applied to arbitrary user-supplied +input files, it should keep only a line in memory, because this is not +very hard and users will want to be able to operate on input files that +are bigger than will fit in core all at once. + + If your program creates complicated data structures, just make them +in core and give a fatal error if `malloc' returns zero. + + +File: standards.info, Node: Writing C, Next: Documentation, Prev: Program Behavior, Up: Top + +Making The Best Use of C +************************ + + This node provides advice on how best to use the C language when +writing GNU software. + +* Menu: + +* Formatting:: Formatting Your Source Code +* Comments:: Commenting Your Work +* Syntactic Conventions:: Clean Use of C Constructs +* Names:: Naming Variables and Functions +* System Portability:: Portability between different operating systems +* CPU Portability:: Supporting the range of CPU types +* System Functions:: Portability and ``standard'' library functions +* Internationalization:: Techniques for internationalization +* Mmap:: How you can safely use `mmap'. + + +File: standards.info, Node: Formatting, Next: Comments, Up: Writing C + +Formatting Your Source Code +=========================== + + It is important to put the open-brace that starts the body of a C +function in column zero, and avoid putting any other open-brace or +open-parenthesis or open-bracket in column zero. Several tools look +for open-braces in column zero to find the beginnings of C functions. +These tools will not work on code not formatted that way. + + It is also important for function definitions to start the name of +the function in column zero. This helps people to search for function +definitions, and may also help certain tools recognize them. Thus, the +proper format is this: + + static char * + concat (s1, s2) /* Name starts in column zero here */ + char *s1, *s2; + { /* Open brace in column zero here */ + ... + } + +or, if you want to use ANSI C, format the definition like this: + + static char * + concat (char *s1, char *s2) + { + ... + } + + In ANSI C, if the arguments don't fit nicely on one line, split it +like this: + + int + lots_of_args (int an_integer, long a_long, short a_short, + double a_double, float a_float) + ... + + For the body of the function, we prefer code formatted like this: + + if (x < foo (y, z)) + haha = bar[4] + 5; + else + { + while (z) + { + haha += foo (z, z); + z--; + } + return ++x + bar (); + } + + We find it easier to read a program when it has spaces before the +open-parentheses and after the commas. Especially after the commas. + + When you split an expression into multiple lines, split it before an +operator, not after one. Here is the right way: + + if (foo_this_is_long && bar > win (x, y, z) + && remaining_condition) + + Try to avoid having two operators of different precedence at the same +level of indentation. For example, don't write this: + + mode = (inmode[j] == VOIDmode + || GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]) + ? outmode[j] : inmode[j]); + + Instead, use extra parentheses so that the indentation shows the +nesting: + + mode = ((inmode[j] == VOIDmode + || (GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j]))) + ? outmode[j] : inmode[j]); + + Insert extra parentheses so that Emacs will indent the code properly. +For example, the following indentation looks nice if you do it by hand, +but Emacs would mess it up: + + v = rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000; + + But adding a set of parentheses solves the problem: + + v = (rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000 + + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000); + + Format do-while statements like this: + + do + { + a = foo (a); + } + while (a > 0); + + Please use formfeed characters (control-L) to divide the program into +pages at logical places (but not within a function). It does not matter +just how long the pages are, since they do not have to fit on a printed +page. The formfeeds should appear alone on lines by themselves. + + +File: standards.info, Node: Comments, Next: Syntactic Conventions, Prev: Formatting, Up: Writing C + +Commenting Your Work +==================== + + Every program should start with a comment saying briefly what it is +for. Example: `fmt - filter for simple filling of text'. + + Please write the comments in a GNU program in English, because +English is the one language that nearly all programmers in all +countries can read. If you do not write English well, please write +comments in English as well as you can, then ask other people to help +rewrite them. If you can't write comments in English, please find +someone to work with you and translate your comments into English. + + Please put a comment on each function saying what the function does, +what sorts of arguments it gets, and what the possible values of +arguments mean and are used for. It is not necessary to duplicate in +words the meaning of the C argument declarations, if a C type is being +used in its customary fashion. If there is anything nonstandard about +its use (such as an argument of type `char *' which is really the +address of the second character of a string, not the first), or any +possible values that would not work the way one would expect (such as, +that strings containing newlines are not guaranteed to work), be sure +to say so. + + Also explain the significance of the return value, if there is one. + + Please put two spaces after the end of a sentence in your comments, +so that the Emacs sentence commands will work. Also, please write +complete sentences and capitalize the first word. If a lower-case +identifier comes at the beginning of a sentence, don't capitalize it! +Changing the spelling makes it a different identifier. If you don't +like starting a sentence with a lower case letter, write the sentence +differently (e.g., "The identifier lower-case is ..."). + + The comment on a function is much clearer if you use the argument +names to speak about the argument values. The variable name itself +should be lower case, but write it in upper case when you are speaking +about the value rather than the variable itself. Thus, "the inode +number NODE_NUM" rather than "an inode". + + There is usually no purpose in restating the name of the function in +the comment before it, because the reader can see that for himself. +There might be an exception when the comment is so long that the +function itself would be off the bottom of the screen. + + There should be a comment on each static variable as well, like this: + + /* Nonzero means truncate lines in the display; + zero means continue them. */ + int truncate_lines; + + Every `#endif' should have a comment, except in the case of short +conditionals (just a few lines) that are not nested. The comment should +state the condition of the conditional that is ending, _including its +sense_. `#else' should have a comment describing the condition _and +sense_ of the code that follows. For example: + + #ifdef foo + ... + #else /* not foo */ + ... + #endif /* not foo */ + #ifdef foo + ... + #endif /* foo */ + +but, by contrast, write the comments this way for a `#ifndef': + + #ifndef foo + ... + #else /* foo */ + ... + #endif /* foo */ + #ifndef foo + ... + #endif /* not foo */ + + +File: standards.info, Node: Syntactic Conventions, Next: Names, Prev: Comments, Up: Writing C + +Clean Use of C Constructs +========================= + + Please explicitly declare all arguments to functions. Don't omit +them just because they are `int's. + + Declarations of external functions and functions to appear later in +the source file should all go in one place near the beginning of the +file (somewhere before the first function definition in the file), or +else should go in a header file. Don't put `extern' declarations inside +functions. + + It used to be common practice to use the same local variables (with +names like `tem') over and over for different values within one +function. Instead of doing this, it is better declare a separate local +variable for each distinct purpose, and give it a name which is +meaningful. This not only makes programs easier to understand, it also +facilitates optimization by good compilers. You can also move the +declaration of each local variable into the smallest scope that includes +all its uses. This makes the program even cleaner. + + Don't use local variables or parameters that shadow global +identifiers. + + Don't declare multiple variables in one declaration that spans lines. +Start a new declaration on each line, instead. For example, instead of +this: + + int foo, + bar; + +write either this: + + int foo, bar; + +or this: + + int foo; + int bar; + +(If they are global variables, each should have a comment preceding it +anyway.) + + When you have an `if'-`else' statement nested in another `if' +statement, always put braces around the `if'-`else'. Thus, never write +like this: + + if (foo) + if (bar) + win (); + else + lose (); + +always like this: + + if (foo) + { + if (bar) + win (); + else + lose (); + } + + If you have an `if' statement nested inside of an `else' statement, +either write `else if' on one line, like this, + + if (foo) + ... + else if (bar) + ... + +with its `then'-part indented like the preceding `then'-part, or write +the nested `if' within braces like this: + + if (foo) + ... + else + { + if (bar) + ... + } + + Don't declare both a structure tag and variables or typedefs in the +same declaration. Instead, declare the structure tag separately and +then use it to declare the variables or typedefs. + + Try to avoid assignments inside `if'-conditions. For example, don't +write this: + + if ((foo = (char *) malloc (sizeof *foo)) == 0) + fatal ("virtual memory exhausted"); + +instead, write this: + + foo = (char *) malloc (sizeof *foo); + if (foo == 0) + fatal ("virtual memory exhausted"); + + Don't make the program ugly to placate `lint'. Please don't insert +any casts to `void'. Zero without a cast is perfectly fine as a null +pointer constant, except when calling a varargs function. + + +File: standards.info, Node: Names, Next: System Portability, Prev: Syntactic Conventions, Up: Writing C + +Naming Variables and Functions +============================== + + The names of global variables and functions in a program serve as +comments of a sort. So don't choose terse names--instead, look for +names that give useful information about the meaning of the variable or +function. In a GNU program, names should be English, like other +comments. + + Local variable names can be shorter, because they are used only +within one context, where (presumably) comments explain their purpose. + + Please use underscores to separate words in a name, so that the Emacs +word commands can be useful within them. Stick to lower case; reserve +upper case for macros and `enum' constants, and for name-prefixes that +follow a uniform convention. + + For example, you should use names like `ignore_space_change_flag'; +don't use names like `iCantReadThis'. + + Variables that indicate whether command-line options have been +specified should be named after the meaning of the option, not after +the option-letter. A comment should state both the exact meaning of +the option and its letter. For example, + + /* Ignore changes in horizontal whitespace (-b). */ + int ignore_space_change_flag; + + When you want to define names with constant integer values, use +`enum' rather than `#define'. GDB knows about enumeration constants. + + Use file names of 14 characters or less, to avoid creating gratuitous +problems on older System V systems. You can use the program `doschk' +to test for this. `doschk' also tests for potential name conflicts if +the files were loaded onto an MS-DOS file system--something you may or +may not care about. + + +File: standards.info, Node: System Portability, Next: CPU Portability, Prev: Names, Up: Writing C + +Portability between System Types +================================ + + In the Unix world, "portability" refers to porting to different Unix +versions. For a GNU program, this kind of portability is desirable, but +not paramount. + + The primary purpose of GNU software is to run on top of the GNU +kernel, compiled with the GNU C compiler, on various types of CPU. The +amount and kinds of variation among GNU systems on different CPUs will +be comparable to the variation among Linux-based GNU systems or among +BSD systems today. So the kinds of portability that are absolutely +necessary are quite limited. + + But many users do run GNU software on non-GNU Unix or Unix-like +systems. So supporting a variety of Unix-like systems is desirable, +although not paramount. + + The easiest way to achieve portability to most Unix-like systems is +to use Autoconf. It's unlikely that your program needs to know more +information about the host platform than Autoconf can provide, simply +because most of the programs that need such knowledge have already been +written. + + Avoid using the format of semi-internal data bases (e.g., +directories) when there is a higher-level alternative (`readdir'). + + As for systems that are not like Unix, such as MSDOS, Windows, the +Macintosh, VMS, and MVS, supporting them is usually so much work that it +is better if you don't. + + The planned GNU kernel is not finished yet, but you can tell which +facilities it will provide by looking at the GNU C Library Manual. The +GNU kernel is based on Mach, so the features of Mach will also be +available. However, if you use Mach features, you'll probably have +trouble debugging your program today. + + +File: standards.info, Node: CPU Portability, Next: System Functions, Prev: System Portability, Up: Writing C + +Portability between CPUs +======================== + + Even GNU systems will differ because of differences among CPU +types--for example, difference in byte ordering and alignment +requirements. It is absolutely essential to handle these differences. +However, don't make any effort to cater to the possibility that an +`int' will be less than 32 bits. We don't support 16-bit machines in +GNU. + + Don't assume that the address of an `int' object is also the address +of its least-significant byte. This is false on big-endian machines. +Thus, don't make the following mistake: + + int c; + ... + while ((c = getchar()) != EOF) + write(file_descriptor, &c, 1); + + When calling functions, you need not worry about the difference +between pointers of various types, or between pointers and integers. +On most machines, there's no difference anyway. As for the few +machines where there is a difference, all of them support ANSI C, so +you can use prototypes (conditionalized to be active only in ANSI C) to +make the code work on those systems. + + In certain cases, it is ok to pass integer and pointer arguments +indiscriminately to the same function, and use no prototype on any +system. For example, many GNU programs have error-reporting functions +that pass their arguments along to `printf' and friends: + + error (s, a1, a2, a3) + char *s; + int a1, a2, a3; + { + fprintf (stderr, "error: "); + fprintf (stderr, s, a1, a2, a3); + } + +In practice, this works on all machines, and it is much simpler than any +"correct" alternative. Be sure _not_ to use a prototype for such +functions. + + However, avoid casting pointers to integers unless you really need +to. These assumptions really reduce portability, and in most programs +they are easy to avoid. In the cases where casting pointers to +integers is essential--such as, a Lisp interpreter which stores type +information as well as an address in one word--it is ok to do so, but +you'll have to make explicit provisions to handle different word sizes. + + +File: standards.info, Node: System Functions, Next: Internationalization, Prev: CPU Portability, Up: Writing C + +Calling System Functions +======================== + + C implementations differ substantially. ANSI C reduces but does not +eliminate the incompatibilities; meanwhile, many users wish to compile +GNU software with pre-ANSI compilers. This chapter gives +recommendations for how to use the more or less standard C library +functions to avoid unnecessary loss of portability. + + * Don't use the value of `sprintf'. It returns the number of + characters written on some systems, but not on all systems. + + * `main' should be declared to return type `int'. It should + terminate either by calling `exit' or by returning the integer + status code; make sure it cannot ever return an undefined value. + + * Don't declare system functions explicitly. + + Almost any declaration for a system function is wrong on some + system. To minimize conflicts, leave it to the system header + files to declare system functions. If the headers don't declare a + function, let it remain undeclared. + + While it may seem unclean to use a function without declaring it, + in practice this works fine for most system library functions on + the systems where this really happens; thus, the disadvantage is + only theoretical. By contrast, actual declarations have + frequently caused actual conflicts. + + * If you must declare a system function, don't specify the argument + types. Use an old-style declaration, not an ANSI prototype. The + more you specify about the function, the more likely a conflict. + + * In particular, don't unconditionally declare `malloc' or `realloc'. + + Most GNU programs use those functions just once, in functions + conventionally named `xmalloc' and `xrealloc'. These functions + call `malloc' and `realloc', respectively, and check the results. + + Because `xmalloc' and `xrealloc' are defined in your program, you + can declare them in other files without any risk of type conflict. + + On most systems, `int' is the same length as a pointer; thus, the + calls to `malloc' and `realloc' work fine. For the few + exceptional systems (mostly 64-bit machines), you can use + *conditionalized* declarations of `malloc' and `realloc'--or put + these declarations in configuration files specific to those + systems. + + * The string functions require special treatment. Some Unix systems + have a header file `string.h'; others have `strings.h'. Neither + file name is portable. There are two things you can do: use + Autoconf to figure out which file to include, or don't include + either file. + + * If you don't include either strings file, you can't get + declarations for the string functions from the header file in the + usual way. + + That causes less of a problem than you might think. The newer ANSI + string functions should be avoided anyway because many systems + still don't support them. The string functions you can use are + these: + + strcpy strncpy strcat strncat + strlen strcmp strncmp + strchr strrchr + + The copy and concatenate functions work fine without a declaration + as long as you don't use their values. Using their values without + a declaration fails on systems where the width of a pointer + differs from the width of `int', and perhaps in other cases. It + is trivial to avoid using their values, so do that. + + The compare functions and `strlen' work fine without a declaration + on most systems, possibly all the ones that GNU software runs on. + You may find it necessary to declare them *conditionally* on a few + systems. + + The search functions must be declared to return `char *'. Luckily, + there is no variation in the data type they return. But there is + variation in their names. Some systems give these functions the + names `index' and `rindex'; other systems use the names `strchr' + and `strrchr'. Some systems support both pairs of names, but + neither pair works on all systems. + + You should pick a single pair of names and use it throughout your + program. (Nowadays, it is better to choose `strchr' and `strrchr' + for new programs, since those are the standard ANSI names.) + Declare both of those names as functions returning `char *'. On + systems which don't support those names, define them as macros in + terms of the other pair. For example, here is what to put at the + beginning of your file (or in a header) if you want to use the + names `strchr' and `strrchr' throughout: + + #ifndef HAVE_STRCHR + #define strchr index + #endif + #ifndef HAVE_STRRCHR + #define strrchr rindex + #endif + + char *strchr (); + char *strrchr (); + + Here we assume that `HAVE_STRCHR' and `HAVE_STRRCHR' are macros +defined in systems where the corresponding functions exist. One way to +get them properly defined is to use Autoconf. + + +File: standards.info, Node: Internationalization, Next: Mmap, Prev: System Functions, Up: Writing C + +Internationalization +==================== + + GNU has a library called GNU gettext that makes it easy to translate +the messages in a program into various languages. You should use this +library in every program. Use English for the messages as they appear +in the program, and let gettext provide the way to translate them into +other languages. + + Using GNU gettext involves putting a call to the `gettext' macro +around each string that might need translation--like this: + + printf (gettext ("Processing file `%s'...")); + +This permits GNU gettext to replace the string `"Processing file +`%s'..."' with a translated version. + + Once a program uses gettext, please make a point of writing calls to +`gettext' when you add new strings that call for translation. + + Using GNU gettext in a package involves specifying a "text domain +name" for the package. The text domain name is used to separate the +translations for this package from the translations for other packages. +Normally, the text domain name should be the same as the name of the +package--for example, `fileutils' for the GNU file utilities. + + To enable gettext to work well, avoid writing code that makes +assumptions about the structure of words or sentences. When you want +the precise text of a sentence to vary depending on the data, use two or +more alternative string constants each containing a complete sentences, +rather than inserting conditionalized words or phrases into a single +sentence framework. + + Here is an example of what not to do: + + printf ("%d file%s processed", nfiles, + nfiles != 1 ? "s" : ""); + +The problem with that example is that it assumes that plurals are made +by adding `s'. If you apply gettext to the format string, like this, + + printf (gettext ("%d file%s processed"), nfiles, + nfiles != 1 ? "s" : ""); + +the message can use different words, but it will still be forced to use +`s' for the plural. Here is a better way: + + printf ((nfiles != 1 ? "%d files processed" + : "%d file processed"), + nfiles); + +This way, you can apply gettext to each of the two strings +independently: + + printf ((nfiles != 1 ? gettext ("%d files processed") + : gettext ("%d file processed")), + nfiles); + +This can be any method of forming the plural of the word for "file", and +also handles languages that require agreement in the word for +"processed". + + A similar problem appears at the level of sentence structure with +this code: + + printf ("# Implicit rule search has%s been done.\n", + f->tried_implicit ? "" : " not"); + +Adding `gettext' calls to this code cannot give correct results for all +languages, because negation in some languages requires adding words at +more than one place in the sentence. By contrast, adding `gettext' +calls does the job straightfowardly if the code starts out like this: + + printf (f->tried_implicit + ? "# Implicit rule search has been done.\n", + : "# Implicit rule search has not been done.\n"); + + +File: standards.info, Node: Mmap, Prev: Internationalization, Up: Writing C + +Mmap +==== + + Don't assume that `mmap' either works on all files or fails for all +files. It may work on some files and fail on others. + + The proper way to use `mmap' is to try it on the specific file for +which you want to use it--and if `mmap' doesn't work, fall back on +doing the job in another way using `read' and `write'. + + The reason this precaution is needed is that the GNU kernel (the +HURD) provides a user-extensible file system, in which there can be many +different kinds of "ordinary files." Many of them support `mmap', but +some do not. It is important to make programs handle all these kinds +of files. + + +File: standards.info, Node: Documentation, Next: Managing Releases, Prev: Writing C, Up: Top + +Documenting Programs +******************** + +* Menu: + +* GNU Manuals:: Writing proper manuals. +* Manual Structure Details:: Specific structure conventions. +* NEWS File:: NEWS files supplement manuals. +* Change Logs:: Recording Changes +* Man Pages:: Man pages are secondary. +* Reading other Manuals:: How far you can go in learning + from other manuals. + + +File: standards.info, Node: GNU Manuals, Next: Manual Structure Details, Up: Documentation + +GNU Manuals +=========== + + The preferred way to document part of the GNU system is to write a +manual in the Texinfo formatting language. See the Texinfo manual, +either the hardcopy, or the on-line version available through `info' or +the Emacs Info subsystem (`C-h i'). + + Programmers often find it most natural to structure the documentation +following the structure of the implementation, which they know. But +this structure is not necessarily good for explaining how to use the +program; it may be irrelevant and confusing for a user. + + At every level, from the sentences in a paragraph to the grouping of +topics into separate manuals, the right way to structure documentation +is according to the concepts and questions that a user will have in mind +when reading it. Sometimes this structure of ideas matches the +structure of the implementation of the software being documented--but +often they are different. Often the most important part of learning to +write good documentation is learning to notice when you are structuring +the documentation like the implementation, and think about better +alternatives. + + For example, each program in the GNU system probably ought to be +documented in one manual; but this does not mean each program should +have its own manual. That would be following the structure of the +implementation, rather than the structure that helps the user +understand. + + Instead, each manual should cover a coherent _topic_. For example, +instead of a manual for `diff' and a manual for `diff3', we have one +manual for "comparison of files" which covers both of those programs, +as well as `cmp'. By documenting these programs together, we can make +the whole subject clearer. + + The manual which discusses a program should document all of the +program's command-line options and all of its commands. It should give +examples of their use. But don't organize the manual as a list of +features. Instead, organize it logically, by subtopics. Address the +questions that a user will ask when thinking about the job that the +program does. + + In general, a GNU manual should serve both as tutorial and reference. +It should be set up for convenient access to each topic through Info, +and for reading straight through (appendixes aside). A GNU manual +should give a good introduction to a beginner reading through from the +start, and should also provide all the details that hackers want. + + That is not as hard as it first sounds. Arrange each chapter as a +logical breakdown of its topic, but order the sections, and write their +text, so that reading the chapter straight through makes sense. Do +likewise when structuring the book into chapters, and when structuring a +section into paragraphs. The watchword is, _at each point, address the +most fundamental and important issue raised by the preceding text._ + + If necessary, add extra chapters at the beginning of the manual which +are purely tutorial and cover the basics of the subject. These provide +the framework for a beginner to understand the rest of the manual. The +Bison manual provides a good example of how to do this. + + Don't use Unix man pages as a model for how to write GNU +documentation; most of them are terse, badly structured, and give +inadequate explanation of the underlying concepts. (There are, of +course exceptions.) Also Unix man pages use a particular format which +is different from what we use in GNU manuals. + + Please do not use the term "pathname" that is used in Unix +documentation; use "file name" (two words) instead. We use the term +"path" only for search paths, which are lists of file names. + + Please do not use the term "illegal" to refer to erroneous input to a +computer program. Please use "invalid" for this, and reserve the term +"illegal" for violations of law. + + +File: standards.info, Node: Manual Structure Details, Next: NEWS File, Prev: GNU Manuals, Up: Documentation + +Manual Structure Details +======================== + + The title page of the manual should state the version of the +programs or packages documented in the manual. The Top node of the +manual should also contain this information. If the manual is changing +more frequently than or independent of the program, also state a version +number for the manual in both of these places. + + Each program documented in the manual should should have a node named +`PROGRAM Invocation' or `Invoking PROGRAM'. This node (together with +its subnodes, if any) should describe the program's command line +arguments and how to run it (the sort of information people would look +in a man page for). Start with an `@example' containing a template for +all the options and arguments that the program uses. + + Alternatively, put a menu item in some menu whose item name fits one +of the above patterns. This identifies the node which that item points +to as the node for this purpose, regardless of the node's actual name. + + There will be automatic features for specifying a program name and +quickly reading just this part of its manual. + + If one manual describes several programs, it should have such a node +for each program described. + + +File: standards.info, Node: NEWS File, Next: Change Logs, Prev: Manual Structure Details, Up: Documentation + +The NEWS File +============= + + In addition to its manual, the package should have a file named +`NEWS' which contains a list of user-visible changes worth mentioning. +In each new release, add items to the front of the file and identify +the version they pertain to. Don't discard old items; leave them in +the file after the newer items. This way, a user upgrading from any +previous version can see what is new. + + If the `NEWS' file gets very long, move some of the older items into +a file named `ONEWS' and put a note at the end referring the user to +that file. + + +File: standards.info, Node: Change Logs, Next: Man Pages, Prev: NEWS File, Up: Documentation + +Change Logs +=========== + + Keep a change log to describe all the changes made to program source +files. The purpose of this is so that people investigating bugs in the +future will know about the changes that might have introduced the bug. +Often a new bug can be found by looking at what was recently changed. +More importantly, change logs can help you eliminate conceptual +inconsistencies between different parts of a program, by giving you a +history of how the conflicting concepts arose and who they came from. + +* Menu: + +* Change Log Concepts:: +* Style of Change Logs:: +* Simple Changes:: +* Conditional Changes:: + + +File: standards.info, Node: Change Log Concepts, Next: Style of Change Logs, Up: Change Logs + +Change Log Concepts +------------------- + + You can think of the change log as a conceptual "undo list" which +explains how earlier versions were different from the current version. +People can see the current version; they don't need the change log to +tell them what is in it. What they want from a change log is a clear +explanation of how the earlier version differed. + + The change log file is normally called `ChangeLog' and covers an +entire directory. Each directory can have its own change log, or a +directory can use the change log of its parent directory-it's up to you. + + Another alternative is to record change log information with a +version control system such as RCS or CVS. This can be converted +automatically to a `ChangeLog' file. + + There's no need to describe the full purpose of the changes or how +they work together. If you think that a change calls for explanation, +you're probably right. Please do explain it--but please put the +explanation in comments in the code, where people will see it whenever +they see the code. For example, "New function" is enough for the +change log when you add a function, because there should be a comment +before the function definition to explain what it does. + + However, sometimes it is useful to write one line to describe the +overall purpose of a batch of changes. + + The easiest way to add an entry to `ChangeLog' is with the Emacs +command `M-x add-change-log-entry'. An entry should have an asterisk, +the name of the changed file, and then in parentheses the name of the +changed functions, variables or whatever, followed by a colon. Then +describe the changes you made to that function or variable. + + +File: standards.info, Node: Style of Change Logs, Next: Simple Changes, Prev: Change Log Concepts, Up: Change Logs + +Style of Change Logs +-------------------- + + Here are some examples of change log entries: + + * register.el (insert-register): Return nil. + (jump-to-register): Likewise. + + * sort.el (sort-subr): Return nil. + + * tex-mode.el (tex-bibtex-file, tex-file, tex-region): + Restart the tex shell if process is gone or stopped. + (tex-shell-running): New function. + + * expr.c (store_one_arg): Round size up for move_block_to_reg. + (expand_call): Round up when emitting USE insns. + * stmt.c (assign_parms): Round size up for move_block_from_reg. + + It's important to name the changed function or variable in full. +Don't abbreviate function or variable names, and don't combine them. +Subsequent maintainers will often search for a function name to find all +the change log entries that pertain to it; if you abbreviate the name, +they won't find it when they search. + + For example, some people are tempted to abbreviate groups of function +names by writing `* register.el ({insert,jump-to}-register)'; this is +not a good idea, since searching for `jump-to-register' or +`insert-register' would not find that entry. + + Separate unrelated change log entries with blank lines. When two +entries represent parts of the same change, so that they work together, +then don't put blank lines between them. Then you can omit the file +name and the asterisk when successive entries are in the same file. + + +File: standards.info, Node: Simple Changes, Next: Conditional Changes, Prev: Style of Change Logs, Up: Change Logs + +Simple Changes +-------------- + + Certain simple kinds of changes don't need much detail in the change +log. + + When you change the calling sequence of a function in a simple +fashion, and you change all the callers of the function, there is no +need to make individual entries for all the callers that you changed. +Just write in the entry for the function being called, "All callers +changed." + + * keyboard.c (Fcommand_execute): New arg SPECIAL. + All callers changed. + + When you change just comments or doc strings, it is enough to write +an entry for the file, without mentioning the functions. Just "Doc +fixes" is enough for the change log. + + There's no need to make change log entries for documentation files. +This is because documentation is not susceptible to bugs that are hard +to fix. Documentation does not consist of parts that must interact in a +precisely engineered fashion. To correct an error, you need not know +the history of the erroneous passage; it is enough to compare what the +documentation says with the way the program actually works. + + +File: standards.info, Node: Conditional Changes, Prev: Simple Changes, Up: Change Logs + +Conditional Changes +------------------- + + C programs often contain compile-time `#if' conditionals. Many +changes are conditional; sometimes you add a new definition which is +entirely contained in a conditional. It is very useful to indicate in +the change log the conditions for which the change applies. + + Our convention for indicating conditional changes is to use square +brackets around the name of the condition. + + Here is a simple example, describing a change which is conditional +but does not have a function or entity name associated with it: + + * xterm.c [SOLARIS2]: Include string.h. + + Here is an entry describing a new definition which is entirely +conditional. This new definition for the macro `FRAME_WINDOW_P' is +used only when `HAVE_X_WINDOWS' is defined: + + * frame.h [HAVE_X_WINDOWS] (FRAME_WINDOW_P): Macro defined. + + Here is an entry for a change within the function `init_display', +whose definition as a whole is unconditional, but the changes themselves +are contained in a `#ifdef HAVE_LIBNCURSES' conditional: + + * dispnew.c (init_display) [HAVE_LIBNCURSES]: If X, call tgetent. + + Here is an entry for a change that takes affect only when a certain +macro is _not_ defined: + + (gethostname) [!HAVE_SOCKETS]: Replace with winsock version. + + +File: standards.info, Node: Man Pages, Next: Reading other Manuals, Prev: Change Logs, Up: Documentation + +Man Pages +========= + + In the GNU project, man pages are secondary. It is not necessary or +expected for every GNU program to have a man page, but some of them do. +It's your choice whether to include a man page in your program. + + When you make this decision, consider that supporting a man page +requires continual effort each time the program is changed. The time +you spend on the man page is time taken away from more useful work. + + For a simple program which changes little, updating the man page may +be a small job. Then there is little reason not to include a man page, +if you have one. + + For a large program that changes a great deal, updating a man page +may be a substantial burden. If a user offers to donate a man page, +you may find this gift costly to accept. It may be better to refuse +the man page unless the same person agrees to take full responsibility +for maintaining it--so that you can wash your hands of it entirely. If +this volunteer later ceases to do the job, then don't feel obliged to +pick it up yourself; it may be better to withdraw the man page from the +distribution until someone else agrees to update it. + + When a program changes only a little, you may feel that the +discrepancies are small enough that the man page remains useful without +updating. If so, put a prominent note near the beginning of the man +page explaining that you don't maintain it and that the Texinfo manual +is more authoritative. The note should say how to access the Texinfo +documentation. + + +File: standards.info, Node: Reading other Manuals, Prev: Man Pages, Up: Documentation + +Reading other Manuals +===================== + + There may be non-free books or documentation files that describe the +program you are documenting. + + It is ok to use these documents for reference, just as the author of +a new algebra textbook can read other books on algebra. A large portion +of any non-fiction book consists of facts, in this case facts about how +a certain program works, and these facts are necessarily the same for +everyone who writes about the subject. But be careful not to copy your +outline structure, wording, tables or examples from preexisting non-free +documentation. Copying from free documentation may be ok; please check +with the FSF about the individual case. + + +File: standards.info, Node: Managing Releases, Prev: Documentation, Up: Top + +The Release Process +******************* + + Making a release is more than just bundling up your source files in a +tar file and putting it up for FTP. You should set up your software so +that it can be configured to run on a variety of systems. Your Makefile +should conform to the GNU standards described below, and your directory +layout should also conform to the standards discussed below. Doing so +makes it easy to include your package into the larger framework of all +GNU software. + +* Menu: + +* Configuration:: How Configuration Should Work +* Makefile Conventions:: Makefile Conventions +* Releases:: Making Releases + + +File: standards.info, Node: Configuration, Next: Makefile Conventions, Up: Managing Releases + +How Configuration Should Work +============================= + + Each GNU distribution should come with a shell script named +`configure'. This script is given arguments which describe the kind of +machine and system you want to compile the program for. + + The `configure' script must record the configuration options so that +they affect compilation. + + One way to do this is to make a link from a standard name such as +`config.h' to the proper configuration file for the chosen system. If +you use this technique, the distribution should _not_ contain a file +named `config.h'. This is so that people won't be able to build the +program without configuring it first. + + Another thing that `configure' can do is to edit the Makefile. If +you do this, the distribution should _not_ contain a file named +`Makefile'. Instead, it should include a file `Makefile.in' which +contains the input used for editing. Once again, this is so that people +won't be able to build the program without configuring it first. + + If `configure' does write the `Makefile', then `Makefile' should +have a target named `Makefile' which causes `configure' to be rerun, +setting up the same configuration that was set up last time. The files +that `configure' reads should be listed as dependencies of `Makefile'. + + All the files which are output from the `configure' script should +have comments at the beginning explaining that they were generated +automatically using `configure'. This is so that users won't think of +trying to edit them by hand. + + The `configure' script should write a file named `config.status' +which describes which configuration options were specified when the +program was last configured. This file should be a shell script which, +if run, will recreate the same configuration. + + The `configure' script should accept an option of the form +`--srcdir=DIRNAME' to specify the directory where sources are found (if +it is not the current directory). This makes it possible to build the +program in a separate directory, so that the actual source directory is +not modified. + + If the user does not specify `--srcdir', then `configure' should +check both `.' and `..' to see if it can find the sources. If it finds +the sources in one of these places, it should use them from there. +Otherwise, it should report that it cannot find the sources, and should +exit with nonzero status. + + Usually the easy way to support `--srcdir' is by editing a +definition of `VPATH' into the Makefile. Some rules may need to refer +explicitly to the specified source directory. To make this possible, +`configure' can add to the Makefile a variable named `srcdir' whose +value is precisely the specified directory. + + The `configure' script should also take an argument which specifies +the type of system to build the program for. This argument should look +like this: + + CPU-COMPANY-SYSTEM + + For example, a Sun 3 might be `m68k-sun-sunos4.1'. + + The `configure' script needs to be able to decode all plausible +alternatives for how to describe a machine. Thus, `sun3-sunos4.1' +would be a valid alias. For many programs, `vax-dec-ultrix' would be +an alias for `vax-dec-bsd', simply because the differences between +Ultrix and BSD are rarely noticeable, but a few programs might need to +distinguish them. + + There is a shell script called `config.sub' that you can use as a +subroutine to validate system types and canonicalize aliases. + + Other options are permitted to specify in more detail the software +or hardware present on the machine, and include or exclude optional +parts of the package: + +`--enable-FEATURE[=PARAMETER]' + Configure the package to build and install an optional user-level + facility called FEATURE. This allows users to choose which + optional features to include. Giving an optional PARAMETER of + `no' should omit FEATURE, if it is built by default. + + No `--enable' option should *ever* cause one feature to replace + another. No `--enable' option should ever substitute one useful + behavior for another useful behavior. The only proper use for + `--enable' is for questions of whether to build part of the program + or exclude it. + +`--with-PACKAGE' + The package PACKAGE will be installed, so configure this package + to work with PACKAGE. + + Possible values of PACKAGE include `gnu-as' (or `gas'), `gnu-ld', + `gnu-libc', `gdb', `x', and `x-toolkit'. + + Do not use a `--with' option to specify the file name to use to + find certain files. That is outside the scope of what `--with' + options are for. + +`--nfp' + The target machine has no floating point processor. + +`--gas' + The target machine assembler is GAS, the GNU assembler. This is + obsolete; users should use `--with-gnu-as' instead. + +`--x' + The target machine has the X Window System installed. This is + obsolete; users should use `--with-x' instead. + + All `configure' scripts should accept all of these "detail" options, +whether or not they make any difference to the particular package at +hand. In particular, they should accept any option that starts with +`--with-' or `--enable-'. This is so users will be able to configure +an entire GNU source tree at once with a single set of options. + + You will note that the categories `--with-' and `--enable-' are +narrow: they *do not* provide a place for any sort of option you might +think of. That is deliberate. We want to limit the possible +configuration options in GNU software. We do not want GNU programs to +have idiosyncratic configuration options. + + Packages that perform part of the compilation process may support +cross-compilation. In such a case, the host and target machines for +the program may be different. The `configure' script should normally +treat the specified type of system as both the host and the target, +thus producing a program which works for the same type of machine that +it runs on. + + The way to build a cross-compiler, cross-assembler, or what have +you, is to specify the option `--host=HOSTTYPE' when running +`configure'. This specifies the host system without changing the type +of target system. The syntax for HOSTTYPE is the same as described +above. + + Bootstrapping a cross-compiler requires compiling it on a machine +other than the host it will run on. Compilation packages accept a +configuration option `--build=HOSTTYPE' for specifying the +configuration on which you will compile them, in case that is different +from the host. + + Programs for which cross-operation is not meaningful need not accept +the `--host' option, because configuring an entire operating system for +cross-operation is not a meaningful thing. + + Some programs have ways of configuring themselves automatically. If +your program is set up to do this, your `configure' script can simply +ignore most of its arguments. + + +File: standards.info, Node: Makefile Conventions, Next: Releases, Prev: Configuration, Up: Managing Releases + +Makefile Conventions +==================== + + This node describes conventions for writing the Makefiles for GNU +programs. + +* Menu: + +* Makefile Basics:: General Conventions for Makefiles +* Utilities in Makefiles:: Utilities in Makefiles +* Command Variables:: Variables for Specifying Commands +* Directory Variables:: Variables for Installation Directories +* Standard Targets:: Standard Targets for Users +* Install Command Categories:: Three categories of commands in the `install' + rule: normal, pre-install and post-install. + + +File: standards.info, Node: Makefile Basics, Next: Utilities in Makefiles, Up: Makefile Conventions + +General Conventions for Makefiles +--------------------------------- + + Every Makefile should contain this line: + + SHELL = /bin/sh + +to avoid trouble on systems where the `SHELL' variable might be +inherited from the environment. (This is never a problem with GNU +`make'.) + + Different `make' programs have incompatible suffix lists and +implicit rules, and this sometimes creates confusion or misbehavior. So +it is a good idea to set the suffix list explicitly using only the +suffixes you need in the particular Makefile, like this: + + .SUFFIXES: + .SUFFIXES: .c .o + +The first line clears out the suffix list, the second introduces all +suffixes which may be subject to implicit rules in this Makefile. + + Don't assume that `.' is in the path for command execution. When +you need to run programs that are a part of your package during the +make, please make sure that it uses `./' if the program is built as +part of the make or `$(srcdir)/' if the file is an unchanging part of +the source code. Without one of these prefixes, the current search +path is used. + + The distinction between `./' (the "build directory") and +`$(srcdir)/' (the "source directory") is important because users can +build in a separate directory using the `--srcdir' option to +`configure'. A rule of the form: + + foo.1 : foo.man sedscript + sed -e sedscript foo.man > foo.1 + +will fail when the build directory is not the source directory, because +`foo.man' and `sedscript' are in the the source directory. + + When using GNU `make', relying on `VPATH' to find the source file +will work in the case where there is a single dependency file, since +the `make' automatic variable `$<' will represent the source file +wherever it is. (Many versions of `make' set `$<' only in implicit +rules.) A Makefile target like + + foo.o : bar.c + $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o + +should instead be written as + + foo.o : bar.c + $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@ + +in order to allow `VPATH' to work correctly. When the target has +multiple dependencies, using an explicit `$(srcdir)' is the easiest way +to make the rule work well. For example, the target above for `foo.1' +is best written as: + + foo.1 : foo.man sedscript + sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@ + + GNU distributions usually contain some files which are not source +files--for example, Info files, and the output from Autoconf, Automake, +Bison or Flex. Since these files normally appear in the source +directory, they should always appear in the source directory, not in the +build directory. So Makefile rules to update them should put the +updated files in the source directory. + + However, if a file does not appear in the distribution, then the +Makefile should not put it in the source directory, because building a +program in ordinary circumstances should not modify the source directory +in any way. + + Try to make the build and installation targets, at least (and all +their subtargets) work correctly with a parallel `make'. + + +File: standards.info, Node: Utilities in Makefiles, Next: Command Variables, Prev: Makefile Basics, Up: Makefile Conventions + +Utilities in Makefiles +---------------------- + + Write the Makefile commands (and any shell scripts, such as +`configure') to run in `sh', not in `csh'. Don't use any special +features of `ksh' or `bash'. + + The `configure' script and the Makefile rules for building and +installation should not use any utilities directly except these: + + cat cmp cp diff echo egrep expr false grep install-info + ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true + + The compression program `gzip' can be used in the `dist' rule. + + Stick to the generally supported options for these programs. For +example, don't use `mkdir -p', convenient as it may be, because most +systems don't support it. + + It is a good idea to avoid creating symbolic links in makefiles, +since a few systems don't support them. + + The Makefile rules for building and installation can also use +compilers and related programs, but should do so via `make' variables +so that the user can substitute alternatives. Here are some of the +programs we mean: + + ar bison cc flex install ld ldconfig lex + make makeinfo ranlib texi2dvi yacc + + Use the following `make' variables to run those programs: + + $(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX) + $(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC) + + When you use `ranlib' or `ldconfig', you should make sure nothing +bad happens if the system does not have the program in question. +Arrange to ignore an error from that command, and print a message before +the command to tell the user that failure of this command does not mean +a problem. (The Autoconf `AC_PROG_RANLIB' macro can help with this.) + + If you use symbolic links, you should implement a fallback for +systems that don't have symbolic links. + + Additional utilities that can be used via Make variables are: + + chgrp chmod chown mknod + + It is ok to use other utilities in Makefile portions (or scripts) +intended only for particular systems where you know those utilities +exist. + + +File: standards.info, Node: Command Variables, Next: Directory Variables, Prev: Utilities in Makefiles, Up: Makefile Conventions + +Variables for Specifying Commands +--------------------------------- + + Makefiles should provide variables for overriding certain commands, +options, and so on. + + In particular, you should run most utility programs via variables. +Thus, if you use Bison, have a variable named `BISON' whose default +value is set with `BISON = bison', and refer to it with `$(BISON)' +whenever you need to use Bison. + + File management utilities such as `ln', `rm', `mv', and so on, need +not be referred to through variables in this way, since users don't +need to replace them with other programs. + + Each program-name variable should come with an options variable that +is used to supply options to the program. Append `FLAGS' to the +program-name variable name to get the options variable name--for +example, `BISONFLAGS'. (The names `CFLAGS' for the C compiler, +`YFLAGS' for yacc, and `LFLAGS' for lex, are exceptions to this rule, +but we keep them because they are standard.) Use `CPPFLAGS' in any +compilation command that runs the preprocessor, and use `LDFLAGS' in +any compilation command that does linking as well as in any direct use +of `ld'. + + If there are C compiler options that _must_ be used for proper +compilation of certain files, do not include them in `CFLAGS'. Users +expect to be able to specify `CFLAGS' freely themselves. Instead, +arrange to pass the necessary options to the C compiler independently +of `CFLAGS', by writing them explicitly in the compilation commands or +by defining an implicit rule, like this: + + CFLAGS = -g + ALL_CFLAGS = -I. $(CFLAGS) + .c.o: + $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $< + + Do include the `-g' option in `CFLAGS', because that is not +_required_ for proper compilation. You can consider it a default that +is only recommended. If the package is set up so that it is compiled +with GCC by default, then you might as well include `-O' in the default +value of `CFLAGS' as well. + + Put `CFLAGS' last in the compilation command, after other variables +containing compiler options, so the user can use `CFLAGS' to override +the others. + + `CFLAGS' should be used in every invocation of the C compiler, both +those which do compilation and those which do linking. + + Every Makefile should define the variable `INSTALL', which is the +basic command for installing a file into the system. + + Every Makefile should also define the variables `INSTALL_PROGRAM' +and `INSTALL_DATA'. (The default for each of these should be +`$(INSTALL)'.) Then it should use those variables as the commands for +actual installation, for executables and nonexecutables respectively. +Use these variables as follows: + + $(INSTALL_PROGRAM) foo $(bindir)/foo + $(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a + + Optionally, you may prepend the value of `DESTDIR' to the target +filename. Doing this allows the installer to create a snapshot of the +installation to be copied onto the real target filesystem later. Do not +set the value of `DESTDIR' in your Makefile, and do not include it in +any installed files. With support for `DESTDIR', the above examples +become: + + $(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo + $(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a + +Always use a file name, not a directory name, as the second argument of +the installation commands. Use a separate command for each file to be +installed. + + +File: standards.info, Node: Directory Variables, Next: Standard Targets, Prev: Command Variables, Up: Makefile Conventions + +Variables for Installation Directories +-------------------------------------- + + Installation directories should always be named by variables, so it +is easy to install in a nonstandard place. The standard names for these +variables are described below. They are based on a standard filesystem +layout; variants of it are used in SVR4, 4.4BSD, Linux, Ultrix v4, and +other modern operating systems. + + These two variables set the root for the installation. All the other +installation directories should be subdirectories of one of these two, +and nothing should be directly installed into these two directories. + +`prefix' + A prefix used in constructing the default values of the variables + listed below. The default value of `prefix' should be + `/usr/local'. When building the complete GNU system, the prefix + will be empty and `/usr' will be a symbolic link to `/'. (If you + are using Autoconf, write it as `@prefix@'.) + + Running `make install' with a different value of `prefix' from the + one used to build the program should NOT recompile the program. + +`exec_prefix' + A prefix used in constructing the default values of some of the + variables listed below. The default value of `exec_prefix' should + be `$(prefix)'. (If you are using Autoconf, write it as + `@exec_prefix@'.) + + Generally, `$(exec_prefix)' is used for directories that contain + machine-specific files (such as executables and subroutine + libraries), while `$(prefix)' is used directly for other + directories. + + Running `make install' with a different value of `exec_prefix' + from the one used to build the program should NOT recompile the + program. + + Executable programs are installed in one of the following +directories. + +`bindir' + The directory for installing executable programs that users can + run. This should normally be `/usr/local/bin', but write it as + `$(exec_prefix)/bin'. (If you are using Autoconf, write it as + `@bindir@'.) + +`sbindir' + The directory for installing executable programs that can be run + from the shell, but are only generally useful to system + administrators. This should normally be `/usr/local/sbin', but + write it as `$(exec_prefix)/sbin'. (If you are using Autoconf, + write it as `@sbindir@'.) + +`libexecdir' + The directory for installing executable programs to be run by other + programs rather than by users. This directory should normally be + `/usr/local/libexec', but write it as `$(exec_prefix)/libexec'. + (If you are using Autoconf, write it as `@libexecdir@'.) + + Data files used by the program during its execution are divided into +categories in two ways. + + * Some files are normally modified by programs; others are never + normally modified (though users may edit some of these). + + * Some files are architecture-independent and can be shared by all + machines at a site; some are architecture-dependent and can be + shared only by machines of the same kind and operating system; + others may never be shared between two machines. + + This makes for six different possibilities. However, we want to +discourage the use of architecture-dependent files, aside from object +files and libraries. It is much cleaner to make other data files +architecture-independent, and it is generally not hard. + + Therefore, here are the variables Makefiles should use to specify +directories: + +`datadir' + The directory for installing read-only architecture independent + data files. This should normally be `/usr/local/share', but write + it as `$(prefix)/share'. (If you are using Autoconf, write it as + `@datadir@'.) As a special exception, see `$(infodir)' and + `$(includedir)' below. + +`sysconfdir' + The directory for installing read-only data files that pertain to a + single machine-that is to say, files for configuring a host. + Mailer and network configuration files, `/etc/passwd', and so + forth belong here. All the files in this directory should be + ordinary ASCII text files. This directory should normally be + `/usr/local/etc', but write it as `$(prefix)/etc'. (If you are + using Autoconf, write it as `@sysconfdir@'.) + + Do not install executables here in this directory (they probably + belong in `$(libexecdir)' or `$(sbindir)'). Also do not install + files that are modified in the normal course of their use (programs + whose purpose is to change the configuration of the system + excluded). Those probably belong in `$(localstatedir)'. + +`sharedstatedir' + The directory for installing architecture-independent data files + which the programs modify while they run. This should normally be + `/usr/local/com', but write it as `$(prefix)/com'. (If you are + using Autoconf, write it as `@sharedstatedir@'.) + +`localstatedir' + The directory for installing data files which the programs modify + while they run, and that pertain to one specific machine. Users + should never need to modify files in this directory to configure + the package's operation; put such configuration information in + separate files that go in `$(datadir)' or `$(sysconfdir)'. + `$(localstatedir)' should normally be `/usr/local/var', but write + it as `$(prefix)/var'. (If you are using Autoconf, write it as + `@localstatedir@'.) + +`libdir' + The directory for object files and libraries of object code. Do + not install executables here, they probably ought to go in + `$(libexecdir)' instead. The value of `libdir' should normally be + `/usr/local/lib', but write it as `$(exec_prefix)/lib'. (If you + are using Autoconf, write it as `@libdir@'.) + +`infodir' + The directory for installing the Info files for this package. By + default, it should be `/usr/local/info', but it should be written + as `$(prefix)/info'. (If you are using Autoconf, write it as + `@infodir@'.) + +`lispdir' + The directory for installing any Emacs Lisp files in this package. + By default, it should be `/usr/local/share/emacs/site-lisp', but + it should be written as `$(prefix)/share/emacs/site-lisp'. + + If you are using Autoconf, write the default as `@lispdir@'. In + order to make `@lispdir@' work, you need the following lines in + your `configure.in' file: + + lispdir='${datadir}/emacs/site-lisp' + AC_SUBST(lispdir) + +`includedir' + The directory for installing header files to be included by user + programs with the C `#include' preprocessor directive. This + should normally be `/usr/local/include', but write it as + `$(prefix)/include'. (If you are using Autoconf, write it as + `@includedir@'.) + + Most compilers other than GCC do not look for header files in + directory `/usr/local/include'. So installing the header files + this way is only useful with GCC. Sometimes this is not a problem + because some libraries are only really intended to work with GCC. + But some libraries are intended to work with other compilers. + They should install their header files in two places, one + specified by `includedir' and one specified by `oldincludedir'. + +`oldincludedir' + The directory for installing `#include' header files for use with + compilers other than GCC. This should normally be `/usr/include'. + (If you are using Autoconf, you can write it as `@oldincludedir@'.) + + The Makefile commands should check whether the value of + `oldincludedir' is empty. If it is, they should not try to use + it; they should cancel the second installation of the header files. + + A package should not replace an existing header in this directory + unless the header came from the same package. Thus, if your Foo + package provides a header file `foo.h', then it should install the + header file in the `oldincludedir' directory if either (1) there + is no `foo.h' there or (2) the `foo.h' that exists came from the + Foo package. + + To tell whether `foo.h' came from the Foo package, put a magic + string in the file--part of a comment--and `grep' for that string. + + Unix-style man pages are installed in one of the following: + +`mandir' + The top-level directory for installing the man pages (if any) for + this package. It will normally be `/usr/local/man', but you should + write it as `$(prefix)/man'. (If you are using Autoconf, write it + as `@mandir@'.) + +`man1dir' + The directory for installing section 1 man pages. Write it as + `$(mandir)/man1'. + +`man2dir' + The directory for installing section 2 man pages. Write it as + `$(mandir)/man2' + +`...' + *Don't make the primary documentation for any GNU software be a + man page. Write a manual in Texinfo instead. Man pages are just + for the sake of people running GNU software on Unix, which is a + secondary application only.* + +`manext' + The file name extension for the installed man page. This should + contain a period followed by the appropriate digit; it should + normally be `.1'. + +`man1ext' + The file name extension for installed section 1 man pages. + +`man2ext' + The file name extension for installed section 2 man pages. + +`...' + Use these names instead of `manext' if the package needs to + install man pages in more than one section of the manual. + + And finally, you should set the following variable: + +`srcdir' + The directory for the sources being compiled. The value of this + variable is normally inserted by the `configure' shell script. + (If you are using Autconf, use `srcdir = @srcdir@'.) + + For example: + + # Common prefix for installation directories. + # NOTE: This directory must exist when you start the install. + prefix = /usr/local + exec_prefix = $(prefix) + # Where to put the executable for the command `gcc'. + bindir = $(exec_prefix)/bin + # Where to put the directories used by the compiler. + libexecdir = $(exec_prefix)/libexec + # Where to put the Info files. + infodir = $(prefix)/info + + If your program installs a large number of files into one of the +standard user-specified directories, it might be useful to group them +into a subdirectory particular to that program. If you do this, you +should write the `install' rule to create these subdirectories. + + Do not expect the user to include the subdirectory name in the value +of any of the variables listed above. The idea of having a uniform set +of variable names for installation directories is to enable the user to +specify the exact same values for several different GNU packages. In +order for this to be useful, all the packages must be designed so that +they will work sensibly when the user does so. + + +File: standards.info, Node: Standard Targets, Next: Install Command Categories, Prev: Directory Variables, Up: Makefile Conventions + +Standard Targets for Users +-------------------------- + + All GNU programs should have the following targets in their +Makefiles: + +`all' + Compile the entire program. This should be the default target. + This target need not rebuild any documentation files; Info files + should normally be included in the distribution, and DVI files + should be made only when explicitly asked for. + + By default, the Make rules should compile and link with `-g', so + that executable programs have debugging symbols. Users who don't + mind being helpless can strip the executables later if they wish. + +`install' + Compile the program and copy the executables, libraries, and so on + to the file names where they should reside for actual use. If + there is a simple test to verify that a program is properly + installed, this target should run that test. + + Do not strip executables when installing them. Devil-may-care + users can use the `install-strip' target to do that. + + If possible, write the `install' target rule so that it does not + modify anything in the directory where the program was built, + provided `make all' has just been done. This is convenient for + building the program under one user name and installing it under + another. + + The commands should create all the directories in which files are + to be installed, if they don't already exist. This includes the + directories specified as the values of the variables `prefix' and + `exec_prefix', as well as all subdirectories that are needed. One + way to do this is by means of an `installdirs' target as described + below. + + Use `-' before any command for installing a man page, so that + `make' will ignore any errors. This is in case there are systems + that don't have the Unix man page documentation system installed. + + The way to install Info files is to copy them into `$(infodir)' + with `$(INSTALL_DATA)' (*note Command Variables::.), and then run + the `install-info' program if it is present. `install-info' is a + program that edits the Info `dir' file to add or update the menu + entry for the given Info file; it is part of the Texinfo package. + Here is a sample rule to install an Info file: + + $(DESTDIR)$(infodir)/foo.info: foo.info + $(POST_INSTALL) + # There may be a newer info file in . than in srcdir. + -if test -f foo.info; then d=.; \ + else d=$(srcdir); fi; \ + $(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@; \ + # Run install-info only if it exists. + # Use `if' instead of just prepending `-' to the + # line so we notice real errors from install-info. + # We use `$(SHELL) -c' because some shells do not + # fail gracefully when there is an unknown command. + if $(SHELL) -c 'install-info --version' \ + >/dev/null 2>&1; then \ + install-info --dir-file=$(DESTDIR)$(infodir)/dir \ + $(DESTDIR)$(infodir)/foo.info; \ + else true; fi + + When writing the `install' target, you must classify all the + commands into three categories: normal ones, "pre-installation" + commands and "post-installation" commands. *Note Install Command + Categories::. + +`uninstall' + Delete all the installed files--the copies that the `install' + target creates. + + This rule should not modify the directories where compilation is + done, only the directories where files are installed. + + The uninstallation commands are divided into three categories, + just like the installation commands. *Note Install Command + Categories::. + +`install-strip' + Like `install', but strip the executable files while installing + them. In many cases, the definition of this target can be very + simple: + + install-strip: + $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \ + install + + Normally we do not recommend stripping an executable unless you + are sure the program has no bugs. However, it can be reasonable + to install a stripped executable for actual execution while saving + the unstripped executable elsewhere in case there is a bug. + +`clean' + Delete all files from the current directory that are normally + created by building the program. Don't delete the files that + record the configuration. Also preserve files that could be made + by building, but normally aren't because the distribution comes + with them. + + Delete `.dvi' files here if they are not part of the distribution. + +`distclean' + Delete all files from the current directory that are created by + configuring or building the program. If you have unpacked the + source and built the program without creating any other files, + `make distclean' should leave only the files that were in the + distribution. + +`mostlyclean' + Like `clean', but may refrain from deleting a few files that people + normally don't want to recompile. For example, the `mostlyclean' + target for GCC does not delete `libgcc.a', because recompiling it + is rarely necessary and takes a lot of time. + +`maintainer-clean' + Delete almost everything from the current directory that can be + reconstructed with this Makefile. This typically includes + everything deleted by `distclean', plus more: C source files + produced by Bison, tags tables, Info files, and so on. + + The reason we say "almost everything" is that running the command + `make maintainer-clean' should not delete `configure' even if + `configure' can be remade using a rule in the Makefile. More + generally, `make maintainer-clean' should not delete anything that + needs to exist in order to run `configure' and then begin to build + the program. This is the only exception; `maintainer-clean' should + delete everything else that can be rebuilt. + + The `maintainer-clean' target is intended to be used by a + maintainer of the package, not by ordinary users. You may need + special tools to reconstruct some of the files that `make + maintainer-clean' deletes. Since these files are normally + included in the distribution, we don't take care to make them easy + to reconstruct. If you find you need to unpack the full + distribution again, don't blame us. + + To help make users aware of this, the commands for the special + `maintainer-clean' target should start with these two: + + @echo 'This command is intended for maintainers to use; it' + @echo 'deletes files that may need special tools to rebuild.' + +`TAGS' + Update a tags table for this program. + +`info' + Generate any Info files needed. The best way to write the rules + is as follows: + + info: foo.info + + foo.info: foo.texi chap1.texi chap2.texi + $(MAKEINFO) $(srcdir)/foo.texi + + You must define the variable `MAKEINFO' in the Makefile. It should + run the `makeinfo' program, which is part of the Texinfo + distribution. + + Normally a GNU distribution comes with Info files, and that means + the Info files are present in the source directory. Therefore, + the Make rule for an info file should update it in the source + directory. When users build the package, ordinarily Make will not + update the Info files because they will already be up to date. + +`dvi' + Generate DVI files for all Texinfo documentation. For example: + + dvi: foo.dvi + + foo.dvi: foo.texi chap1.texi chap2.texi + $(TEXI2DVI) $(srcdir)/foo.texi + + You must define the variable `TEXI2DVI' in the Makefile. It should + run the program `texi2dvi', which is part of the Texinfo + distribution.(1) Alternatively, write just the dependencies, and + allow GNU `make' to provide the command. + +`dist' + Create a distribution tar file for this program. The tar file + should be set up so that the file names in the tar file start with + a subdirectory name which is the name of the package it is a + distribution for. This name can include the version number. + + For example, the distribution tar file of GCC version 1.40 unpacks + into a subdirectory named `gcc-1.40'. + + The easiest way to do this is to create a subdirectory + appropriately named, use `ln' or `cp' to install the proper files + in it, and then `tar' that subdirectory. + + Compress the tar file file with `gzip'. For example, the actual + distribution file for GCC version 1.40 is called `gcc-1.40.tar.gz'. + + The `dist' target should explicitly depend on all non-source files + that are in the distribution, to make sure they are up to date in + the distribution. *Note Making Releases: Releases. + +`check' + Perform self-tests (if any). The user must build the program + before running the tests, but need not install the program; you + should write the self-tests so that they work when the program is + built but not installed. + + The following targets are suggested as conventional names, for +programs in which they are useful. + +`installcheck' + Perform installation tests (if any). The user must build and + install the program before running the tests. You should not + assume that `$(bindir)' is in the search path. + +`installdirs' + It's useful to add a target named `installdirs' to create the + directories where files are installed, and their parent + directories. There is a script called `mkinstalldirs' which is + convenient for this; you can find it in the Texinfo package. You + can use a rule like this: + + # Make sure all installation directories (e.g. $(bindir)) + # actually exist by making them if necessary. + installdirs: mkinstalldirs + $(srcdir)/mkinstalldirs $(bindir) $(datadir) \ + $(libdir) $(infodir) \ + $(mandir) + + This rule should not modify the directories where compilation is + done. It should do nothing but create installation directories. + + ---------- Footnotes ---------- + + (1) `texi2dvi' uses TeX to do the real work of formatting. TeX is +not distributed with Texinfo. + + +File: standards.info, Node: Install Command Categories, Prev: Standard Targets, Up: Makefile Conventions + +Install Command Categories +-------------------------- + + When writing the `install' target, you must classify all the +commands into three categories: normal ones, "pre-installation" +commands and "post-installation" commands. + + Normal commands move files into their proper places, and set their +modes. They may not alter any files except the ones that come entirely +from the package they belong to. + + Pre-installation and post-installation commands may alter other +files; in particular, they can edit global configuration files or data +bases. + + Pre-installation commands are typically executed before the normal +commands, and post-installation commands are typically run after the +normal commands. + + The most common use for a post-installation command is to run +`install-info'. This cannot be done with a normal command, since it +alters a file (the Info directory) which does not come entirely and +solely from the package being installed. It is a post-installation +command because it needs to be done after the normal command which +installs the package's Info files. + + Most programs don't need any pre-installation commands, but we have +the feature just in case it is needed. + + To classify the commands in the `install' rule into these three +categories, insert "category lines" among them. A category line +specifies the category for the commands that follow. + + A category line consists of a tab and a reference to a special Make +variable, plus an optional comment at the end. There are three +variables you can use, one for each category; the variable name +specifies the category. Category lines are no-ops in ordinary execution +because these three Make variables are normally undefined (and you +_should not_ define them in the makefile). + + Here are the three possible category lines, each with a comment that +explains what it means: + + $(PRE_INSTALL) # Pre-install commands follow. + $(POST_INSTALL) # Post-install commands follow. + $(NORMAL_INSTALL) # Normal commands follow. + + If you don't use a category line at the beginning of the `install' +rule, all the commands are classified as normal until the first category +line. If you don't use any category lines, all the commands are +classified as normal. + + These are the category lines for `uninstall': + + $(PRE_UNINSTALL) # Pre-uninstall commands follow. + $(POST_UNINSTALL) # Post-uninstall commands follow. + $(NORMAL_UNINSTALL) # Normal commands follow. + + Typically, a pre-uninstall command would be used for deleting entries +from the Info directory. + + If the `install' or `uninstall' target has any dependencies which +act as subroutines of installation, then you should start _each_ +dependency's commands with a category line, and start the main target's +commands with a category line also. This way, you can ensure that each +command is placed in the right category regardless of which of the +dependencies actually run. + + Pre-installation and post-installation commands should not run any +programs except for these: + + [ basename bash cat chgrp chmod chown cmp cp dd diff echo + egrep expand expr false fgrep find getopt grep gunzip gzip + hostname install install-info kill ldconfig ln ls md5sum + mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee + test touch true uname xargs yes + + The reason for distinguishing the commands in this way is for the +sake of making binary packages. Typically a binary package contains +all the executables and other files that need to be installed, and has +its own method of installing them--so it does not need to run the normal +installation commands. But installing the binary package does need to +execute the pre-installation and post-installation commands. + + Programs to build binary packages work by extracting the +pre-installation and post-installation commands. Here is one way of +extracting the pre-installation commands: + + make -n install -o all \ + PRE_INSTALL=pre-install \ + POST_INSTALL=post-install \ + NORMAL_INSTALL=normal-install \ + | gawk -f pre-install.awk + +where the file `pre-install.awk' could contain this: + + $0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ {on = 0} + on {print $0} + $0 ~ /^\t[ \t]*pre_install[ \t]*$/ {on = 1} + + The resulting file of pre-installation commands is executed as a +shell script as part of installing the binary package. + + +File: standards.info, Node: Releases, Prev: Makefile Conventions, Up: Managing Releases + +Making Releases +=============== + + Package the distribution of `Foo version 69.96' up in a gzipped tar +file with the name `foo-69.96.tar.gz'. It should unpack into a +subdirectory named `foo-69.96'. + + Building and installing the program should never modify any of the +files contained in the distribution. This means that all the files +that form part of the program in any way must be classified into "source +files" and "non-source files". Source files are written by humans and +never changed automatically; non-source files are produced from source +files by programs under the control of the Makefile. + + Naturally, all the source files must be in the distribution. It is +okay to include non-source files in the distribution, provided they are +up-to-date and machine-independent, so that building the distribution +normally will never modify them. We commonly include non-source files +produced by Bison, `lex', TeX, and `makeinfo'; this helps avoid +unnecessary dependencies between our distributions, so that users can +install whichever packages they want to install. + + Non-source files that might actually be modified by building and +installing the program should *never* be included in the distribution. +So if you do distribute non-source files, always make sure they are up +to date when you make a new distribution. + + Make sure that the directory into which the distribution unpacks (as +well as any subdirectories) are all world-writable (octal mode 777). +This is so that old versions of `tar' which preserve the ownership and +permissions of the files from the tar archive will be able to extract +all the files even if the user is unprivileged. + + Make sure that all the files in the distribution are world-readable. + + Make sure that no file name in the distribution is more than 14 +characters long. Likewise, no file created by building the program +should have a name longer than 14 characters. The reason for this is +that some systems adhere to a foolish interpretation of the POSIX +standard, and refuse to open a longer name, rather than truncating as +they did in the past. + + Don't include any symbolic links in the distribution itself. If the +tar file contains symbolic links, then people cannot even unpack it on +systems that don't support symbolic links. Also, don't use multiple +names for one file in different directories, because certain file +systems cannot handle this and that prevents unpacking the distribution. + + Try to make sure that all the file names will be unique on MS-DOS. A +name on MS-DOS consists of up to 8 characters, optionally followed by a +period and up to three characters. MS-DOS will truncate extra +characters both before and after the period. Thus, `foobarhacker.c' +and `foobarhacker.o' are not ambiguous; they are truncated to +`foobarha.c' and `foobarha.o', which are distinct. + + Include in your distribution a copy of the `texinfo.tex' you used to +test print any `*.texinfo' or `*.texi' files. + + Likewise, if your program uses small GNU software packages like +regex, getopt, obstack, or termcap, include them in the distribution +file. Leaving them out would make the distribution file a little +smaller at the expense of possible inconvenience to a user who doesn't +know what other files to get. + + + +Tag Table: +Node: Top964 +Node: Preface1507 +Node: Intellectual Property2534 +Node: Reading Non-Free Code2909 +Node: Contributions4641 +Node: Design Advice6635 +Node: Compatibility7152 +Node: Using Extensions8663 +Node: ANSI C10165 +Node: Source Language11401 +Node: Program Behavior12894 +Node: Semantics13603 +Node: Libraries17357 +Node: Errors18592 +Node: User Interfaces19815 +Node: Option Table26562 +Node: Memory Usage40651 +Node: Writing C41645 +Node: Formatting42486 +Node: Comments45758 +Node: Syntactic Conventions49056 +Node: Names51994 +Node: System Portability53730 +Node: CPU Portability55506 +Node: System Functions57667 +Node: Internationalization62771 +Node: Mmap65919 +Node: Documentation66624 +Node: GNU Manuals67182 +Node: Manual Structure Details71069 +Node: NEWS File72399 +Node: Change Logs73080 +Node: Change Log Concepts73797 +Node: Style of Change Logs75565 +Node: Simple Changes77119 +Node: Conditional Changes78310 +Node: Man Pages79687 +Node: Reading other Manuals81306 +Node: Managing Releases82090 +Node: Configuration82826 +Node: Makefile Conventions89766 +Node: Makefile Basics90446 +Node: Utilities in Makefiles93615 +Node: Command Variables95751 +Node: Directory Variables99252 +Node: Standard Targets110129 +Node: Install Command Categories120669 +Node: Releases125242 + +End Tag Table

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.