URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/gdb-5.0/gdb/testsuite/gdb.hp/gdb.base-hp
- from Rev 107 to Rev 1765
- ↔ Reverse comparison
Rev 107 → Rev 1765
/reg-pa64.exp
0,0 → 1,189
# Tests of wide register displays for GDB on HPPA 2.0 machines |
# Copyright 1994, 1995 Free Software Foundation, Inc. |
|
# This program is free software; you can redistribute it and/or modify |
# it under the terms of the GNU General Public License as published by |
# the Free Software Foundation; either version 2 of the License, or |
# (at your option) any later version. |
# |
# This program is distributed in the hope that it will be useful, |
# but WITHOUT ANY WARRANTY; without even the implied warranty of |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
# GNU General Public License for more details. |
# |
# You should have received a copy of the GNU General Public License |
# along with this program; if not, write to the Free Software |
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
|
# Please email any bugs, comments, and/or additions to this file to: |
# bug-gdb@prep.ai.mit.edu |
|
# use this to debug: |
#log_user 1 |
|
if $tracelevel { |
strace $tracelevel |
} |
|
if { [skip_hp_tests] } { continue } |
|
if ![istarget "hppa*-*-*"] { |
verbose "Wide register test ignored for non-hppa targets." |
return 0 |
} |
|
if ![istarget "hppa2.0w-hp-hpux*"] { |
verbose "reg-pa64.exp is only for PA2.0W." |
return 0 |
} |
|
set testfile "reg-pa64" |
set srcfile ${testfile}.s |
set binfile ${objdir}/${subdir}/${testfile} |
|
# To build a pa 2.0 executable |
# |
# as +DA2.0W -o reg-pa64 reg-pa64.s |
# or |
# cc +DA2.0W -g -o reg-pa64 reg-pa64.s |
# |
# Don't reject if there are warnings, as we expect this warning: |
# |
# (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected. |
# The linked output may not run on a PA 1.x system. |
# |
|
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { |
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
} |
|
gdb_exit |
gdb_start |
gdb_reinitialize_dir $srcdir/$subdir |
gdb_load ${binfile} |
|
# test machine--there's no 2.0n architecture, so we have |
# to try to run the app. |
# |
gdb_test "break main" "Breakpoint.*" "initial set-up" |
|
send_gdb "run\n" |
gdb_expect { |
-re ".*Executable file incompatible with hardware.*$gdb_prompt $" { |
# Not hppa2.0 machine |
# |
return 0 |
} |
-re "Cannot exec.*$gdb_prompt $" { |
# Not hppa2.0 machine |
# |
return 0 |
} |
-re ".*Starting program:.*$gdb_prompt $" { |
pass "Ready to start test" |
} |
timeout { |
fail "initial set-up, part 2 (timeout)" |
return 0 |
} |
} |
|
# Let the program set known values. This secretly deletes |
# the breakpoint at main and re-runs to mainend. |
# |
runto mainend |
|
# Look for known values |
# |
gdb_test "info reg r1" "r1 1" |
gdb_test "info reg r4" "r4 2" |
gdb_test "info reg r5" "r5 4" |
gdb_test "info reg r6" "r6 8" |
gdb_test "info reg r7" "r7 10" |
gdb_test "info reg r8" "r8 20" |
gdb_test "info reg r9" "r9 40" |
gdb_test "info reg r10" "r10 80" |
gdb_test "info reg r11" "r11 100" |
gdb_test "info reg r12" "r12 200" |
gdb_test "info reg r13" "r13 400" |
gdb_test "info reg r14" "r14 800" |
gdb_test "info reg r15" "r15 1000" |
gdb_test "info reg r16" "r16 2000" |
|
# Two odd variants that GDB supports are: |
# "1" means "r1", and |
# "$1" means "r1" |
# |
gdb_test "info reg 1 4" "r1 1.*r4 2" |
gdb_test "info reg \$1" "r1 1" |
|
# Verify that GDB responds gracefully to a register ID number that |
# is out of range. |
# |
gdb_test "info reg 999" "999: invalid register" |
|
# Make sure the floating point status and error registers |
# don't show up as floating point numbers! |
# |
gdb_test "info reg fpsr" ".*fpsr 0.*" "fpsr" |
gdb_test "info reg fpe1" ".*fpe1 .*" "fpe1" |
gdb_test "info reg fpe2" ".*fpe2 .*" "fpe2" |
gdb_test "info reg fpe3" ".*fpe3 .*" "fpe3" |
#DTS CLLbs16708 |
#info reg should recognize fpe4..fpe7. |
setup_xfail hppa2.0w-hp-hpux* CLLbs16708 |
gdb_test "info reg fpe4" ".*fpe4 .*" "fpe4" |
setup_xfail hppa2.0w-hp-hpux* CLLbs16708 |
gdb_test "info reg fpe5" ".*fpe5 .*" "fpe5" |
setup_xfail hppa2.0w-hp-hpux* CLLbs16708 |
gdb_test "info reg fpe6" ".*fpe6 .*" "fpe6" |
setup_xfail hppa2.0w-hp-hpux* CLLbs16708 |
gdb_test "info reg fpe7" ".*fpe7 .*" "fpe7" |
|
gdb_test "info reg fr4" ".*fr4.*(double precision).* 1.*" |
gdb_test "info reg fr5" ".*fr5.*(double precision).* 2.*" |
gdb_test "info reg fr6" ".*fr6.*(double precision).* 2.*" |
gdb_test "info reg fr7" ".*fr7.*(double precision).* 4.*" |
gdb_test "info reg fr8" ".*fr8.*(double precision).* 8.*" |
gdb_test "info reg fr9" ".*fr9.*(double precision).* 32.*" |
gdb_test "info reg fr10" ".*fr10.*(double precision).* 256.*" |
|
gdb_test "info reg r19" "r19 deadbeefbadcadee" |
|
# Need to add test of use of $<register-name> |
# |
# Q: How do you say a literal "$" in expect? |
# A: You say "\$". A literal "\" is "\\". |
# |
# Please note that this test will fail as long as we are running |
# in 32-bit mode: it will produce "$1 = 0xbadcadee". To fix it |
# would require building a real 64-bit gdb (expression evaluation, |
# in particular). |
# |
send_gdb "p/x \$r19\n" |
gdb_expect { |
-re ".*= 0xdeadbeefbadcadee.*$gdb_prompt $" { |
pass "64-bit works" |
} |
-re ".*= 0xbadcadee.*$gdb_prompt $" { |
pass "32-bit extract when using PRINT; expected but not good" |
} |
-re ".*$gdb_prompt $" { |
fail "didn't print any part of right value" |
} |
timeout { |
fail "timeout on print" |
} |
} |
|
# Need to add tests of setting wide regs too. E.g. |
# |
# set $r4 = 0x1234567890123456 |
# p/x $r4 |
# |
|
# done |
# |
gdb_exit |
|
return 0 |
/configure
0,0 → 1,899
#! /bin/sh |
|
# Guess values for system-dependent variables and create Makefiles. |
# Generated automatically using autoconf version 2.12.1 |
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. |
# |
# This configure script is free software; the Free Software Foundation |
# gives unlimited permission to copy, distribute and modify it. |
|
# Defaults: |
ac_help= |
ac_default_prefix=/usr/local |
# Any additions from configure.in: |
|
# Initialize some variables set by options. |
# The variables have the same names as the options, with |
# dashes changed to underlines. |
build=NONE |
cache_file=./config.cache |
exec_prefix=NONE |
host=NONE |
no_create= |
nonopt=NONE |
no_recursion= |
prefix=NONE |
program_prefix=NONE |
program_suffix=NONE |
program_transform_name=s,x,x, |
silent= |
site= |
srcdir= |
target=NONE |
verbose= |
x_includes=NONE |
x_libraries=NONE |
bindir='${exec_prefix}/bin' |
sbindir='${exec_prefix}/sbin' |
libexecdir='${exec_prefix}/libexec' |
datadir='${prefix}/share' |
sysconfdir='${prefix}/etc' |
sharedstatedir='${prefix}/com' |
localstatedir='${prefix}/var' |
libdir='${exec_prefix}/lib' |
includedir='${prefix}/include' |
oldincludedir='/usr/include' |
infodir='${prefix}/info' |
mandir='${prefix}/man' |
|
# Initialize some other variables. |
subdirs= |
MFLAGS= MAKEFLAGS= |
SHELL=${CONFIG_SHELL-/bin/sh} |
# Maximum number of lines to put in a shell here document. |
ac_max_here_lines=12 |
|
ac_prev= |
for ac_option |
do |
|
# If the previous option needs an argument, assign it. |
if test -n "$ac_prev"; then |
eval "$ac_prev=\$ac_option" |
ac_prev= |
continue |
fi |
|
case "$ac_option" in |
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; |
*) ac_optarg= ;; |
esac |
|
# Accept the important Cygnus configure options, so we can diagnose typos. |
|
case "$ac_option" in |
|
-bindir | --bindir | --bindi | --bind | --bin | --bi) |
ac_prev=bindir ;; |
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
bindir="$ac_optarg" ;; |
|
-build | --build | --buil | --bui | --bu) |
ac_prev=build ;; |
-build=* | --build=* | --buil=* | --bui=* | --bu=*) |
build="$ac_optarg" ;; |
|
-cache-file | --cache-file | --cache-fil | --cache-fi \ |
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
ac_prev=cache_file ;; |
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
cache_file="$ac_optarg" ;; |
|
-datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
ac_prev=datadir ;; |
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| --da=*) |
datadir="$ac_optarg" ;; |
|
-disable-* | --disable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
eval "enable_${ac_feature}=no" ;; |
|
-enable-* | --enable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "enable_${ac_feature}='$ac_optarg'" ;; |
|
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| --exec | --exe | --ex) |
ac_prev=exec_prefix ;; |
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| --exec=* | --exe=* | --ex=*) |
exec_prefix="$ac_optarg" ;; |
|
-gas | --gas | --ga | --g) |
# Obsolete; use --with-gas. |
with_gas=yes ;; |
|
-help | --help | --hel | --he) |
# Omit some internal or obsolete options to make the list less imposing. |
# This message is too long to be a string in the A/UX 3.1 sh. |
cat << EOF |
Usage: configure [options] [host] |
Options: [defaults in brackets after descriptions] |
Configuration: |
--cache-file=FILE cache test results in FILE |
--help print this message |
--no-create do not create output files |
--quiet, --silent do not print \`checking...' messages |
--version print the version of autoconf that created configure |
Directory and file names: |
--prefix=PREFIX install architecture-independent files in PREFIX |
[$ac_default_prefix] |
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
[same as prefix] |
--bindir=DIR user executables in DIR [EPREFIX/bin] |
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin] |
--libexecdir=DIR program executables in DIR [EPREFIX/libexec] |
--datadir=DIR read-only architecture-independent data in DIR |
[PREFIX/share] |
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] |
--sharedstatedir=DIR modifiable architecture-independent data in DIR |
[PREFIX/com] |
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] |
--libdir=DIR object code libraries in DIR [EPREFIX/lib] |
--includedir=DIR C header files in DIR [PREFIX/include] |
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] |
--infodir=DIR info documentation in DIR [PREFIX/info] |
--mandir=DIR man documentation in DIR [PREFIX/man] |
--srcdir=DIR find the sources in DIR [configure dir or ..] |
--program-prefix=PREFIX prepend PREFIX to installed program names |
--program-suffix=SUFFIX append SUFFIX to installed program names |
--program-transform-name=PROGRAM |
run sed PROGRAM on installed program names |
EOF |
cat << EOF |
Host type: |
--build=BUILD configure for building on BUILD [BUILD=HOST] |
--host=HOST configure for HOST [guessed] |
--target=TARGET configure for TARGET [TARGET=HOST] |
Features and packages: |
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
--enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes] |
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) |
--x-includes=DIR X include files are in DIR |
--x-libraries=DIR X library files are in DIR |
EOF |
if test -n "$ac_help"; then |
echo "--enable and --with options recognized:$ac_help" |
fi |
exit 0 ;; |
|
-host | --host | --hos | --ho) |
ac_prev=host ;; |
-host=* | --host=* | --hos=* | --ho=*) |
host="$ac_optarg" ;; |
|
-includedir | --includedir | --includedi | --included | --include \ |
| --includ | --inclu | --incl | --inc) |
ac_prev=includedir ;; |
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| --includ=* | --inclu=* | --incl=* | --inc=*) |
includedir="$ac_optarg" ;; |
|
-infodir | --infodir | --infodi | --infod | --info | --inf) |
ac_prev=infodir ;; |
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
infodir="$ac_optarg" ;; |
|
-libdir | --libdir | --libdi | --libd) |
ac_prev=libdir ;; |
-libdir=* | --libdir=* | --libdi=* | --libd=*) |
libdir="$ac_optarg" ;; |
|
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| --libexe | --libex | --libe) |
ac_prev=libexecdir ;; |
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| --libexe=* | --libex=* | --libe=*) |
libexecdir="$ac_optarg" ;; |
|
-localstatedir | --localstatedir | --localstatedi | --localstated \ |
| --localstate | --localstat | --localsta | --localst \ |
| --locals | --local | --loca | --loc | --lo) |
ac_prev=localstatedir ;; |
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
localstatedir="$ac_optarg" ;; |
|
-mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
ac_prev=mandir ;; |
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
mandir="$ac_optarg" ;; |
|
-nfp | --nfp | --nf) |
# Obsolete; use --without-fp. |
with_fp=no ;; |
|
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) |
no_create=yes ;; |
|
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
no_recursion=yes ;; |
|
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| --oldin | --oldi | --old | --ol | --o) |
ac_prev=oldincludedir ;; |
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
oldincludedir="$ac_optarg" ;; |
|
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
ac_prev=prefix ;; |
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
prefix="$ac_optarg" ;; |
|
-program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| --program-pre | --program-pr | --program-p) |
ac_prev=program_prefix ;; |
-program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
program_prefix="$ac_optarg" ;; |
|
-program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| --program-suf | --program-su | --program-s) |
ac_prev=program_suffix ;; |
-program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
program_suffix="$ac_optarg" ;; |
|
-program-transform-name | --program-transform-name \ |
| --program-transform-nam | --program-transform-na \ |
| --program-transform-n | --program-transform- \ |
| --program-transform | --program-transfor \ |
| --program-transfo | --program-transf \ |
| --program-trans | --program-tran \ |
| --progr-tra | --program-tr | --program-t) |
ac_prev=program_transform_name ;; |
-program-transform-name=* | --program-transform-name=* \ |
| --program-transform-nam=* | --program-transform-na=* \ |
| --program-transform-n=* | --program-transform-=* \ |
| --program-transform=* | --program-transfor=* \ |
| --program-transfo=* | --program-transf=* \ |
| --program-trans=* | --program-tran=* \ |
| --progr-tra=* | --program-tr=* | --program-t=*) |
program_transform_name="$ac_optarg" ;; |
|
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
silent=yes ;; |
|
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
ac_prev=sbindir ;; |
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| --sbi=* | --sb=*) |
sbindir="$ac_optarg" ;; |
|
-sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| --sharedst | --shareds | --shared | --share | --shar \ |
| --sha | --sh) |
ac_prev=sharedstatedir ;; |
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| --sha=* | --sh=*) |
sharedstatedir="$ac_optarg" ;; |
|
-site | --site | --sit) |
ac_prev=site ;; |
-site=* | --site=* | --sit=*) |
site="$ac_optarg" ;; |
|
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
ac_prev=srcdir ;; |
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
srcdir="$ac_optarg" ;; |
|
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| --syscon | --sysco | --sysc | --sys | --sy) |
ac_prev=sysconfdir ;; |
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
sysconfdir="$ac_optarg" ;; |
|
-target | --target | --targe | --targ | --tar | --ta | --t) |
ac_prev=target ;; |
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
target="$ac_optarg" ;; |
|
-v | -verbose | --verbose | --verbos | --verbo | --verb) |
verbose=yes ;; |
|
-version | --version | --versio | --versi | --vers) |
echo "configure generated by autoconf version 2.12.1" |
exit 0 ;; |
|
-with-* | --with-*) |
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "with_${ac_package}='$ac_optarg'" ;; |
|
-without-* | --without-*) |
ac_package=`echo $ac_option|sed -e 's/-*without-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
eval "with_${ac_package}=no" ;; |
|
--x) |
# Obsolete; use --with-x. |
with_x=yes ;; |
|
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| --x-incl | --x-inc | --x-in | --x-i) |
ac_prev=x_includes ;; |
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
x_includes="$ac_optarg" ;; |
|
-x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
ac_prev=x_libraries ;; |
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
x_libraries="$ac_optarg" ;; |
|
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } |
;; |
|
*) |
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then |
echo "configure: warning: $ac_option: invalid host type" 1>&2 |
fi |
if test "x$nonopt" != xNONE; then |
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } |
fi |
nonopt="$ac_option" |
;; |
|
esac |
done |
|
if test -n "$ac_prev"; then |
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } |
fi |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
# File descriptor usage: |
# 0 standard input |
# 1 file creation |
# 2 errors and warnings |
# 3 some systems may open it to /dev/tty |
# 4 used on the Kubota Titan |
# 6 checking for... messages and results |
# 5 compiler messages saved in config.log |
if test "$silent" = yes; then |
exec 6>/dev/null |
else |
exec 6>&1 |
fi |
exec 5>./config.log |
|
echo "\ |
This file contains any messages produced by compilers while |
running configure, to aid debugging if configure makes a mistake. |
" 1>&5 |
|
# Strip out --no-create and --no-recursion so they do not pile up. |
# Also quote any args containing shell metacharacters. |
ac_configure_args= |
for ac_arg |
do |
case "$ac_arg" in |
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) ;; |
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; |
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) |
ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
*) ac_configure_args="$ac_configure_args $ac_arg" ;; |
esac |
done |
|
# NLS nuisances. |
# Only set these to C if already set. These must not be set unconditionally |
# because not all systems understand e.g. LANG=C (notably SCO). |
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! |
# Non-C LC_CTYPE values break the ctype check. |
if test "${LANG+set}" = set; then LANG=C; export LANG; fi |
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi |
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi |
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi |
|
# confdefs.h avoids OS command line length limits that DEFS can exceed. |
rm -rf conftest* confdefs.h |
# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
echo > confdefs.h |
|
# A filename unique to this package, relative to the directory that |
# configure is in, which we can look for to find out if srcdir is correct. |
ac_unique_file=dollar.exp |
|
# Find the source files, if location was not specified. |
if test -z "$srcdir"; then |
ac_srcdir_defaulted=yes |
# Try the directory containing this script, then its parent. |
ac_prog=$0 |
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` |
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. |
srcdir=$ac_confdir |
if test ! -r $srcdir/$ac_unique_file; then |
srcdir=.. |
fi |
else |
ac_srcdir_defaulted=no |
fi |
if test ! -r $srcdir/$ac_unique_file; then |
if test "$ac_srcdir_defaulted" = yes; then |
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } |
else |
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } |
fi |
fi |
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` |
|
# Prefer explicitly selected file to automatically selected ones. |
if test -z "$CONFIG_SITE"; then |
if test "x$prefix" != xNONE; then |
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
else |
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
fi |
fi |
for ac_site_file in $CONFIG_SITE; do |
if test -r "$ac_site_file"; then |
echo "loading site script $ac_site_file" |
. "$ac_site_file" |
fi |
done |
|
if test -r "$cache_file"; then |
echo "loading cache $cache_file" |
. $cache_file |
else |
echo "creating cache $cache_file" |
> $cache_file |
fi |
|
ac_ext=c |
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' |
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' |
cross_compiling=$ac_cv_prog_cc_cross |
|
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then |
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. |
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then |
ac_n= ac_c=' |
' ac_t=' ' |
else |
ac_n=-n ac_c= ac_t= |
fi |
else |
ac_n= ac_c='\c' ac_t= |
fi |
|
|
|
CC=${CC-cc} |
|
ac_aux_dir= |
for ac_dir in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../..; do |
if test -f $ac_dir/install-sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f $ac_dir/install.sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../.." 1>&2; exit 1; } |
fi |
ac_config_guess=$ac_aux_dir/config.guess |
ac_config_sub=$ac_aux_dir/config.sub |
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. |
|
|
# Do some error checking and defaulting for the host and target type. |
# The inputs are: |
# configure --host=HOST --target=TARGET --build=BUILD NONOPT |
# |
# The rules are: |
# 1. You are not allowed to specify --host, --target, and nonopt at the |
# same time. |
# 2. Host defaults to nonopt. |
# 3. If nonopt is not specified, then host defaults to the current host, |
# as determined by config.guess. |
# 4. Target and build default to nonopt. |
# 5. If nonopt is not specified, then target and build default to host. |
|
# The aliases save the names the user supplied, while $host etc. |
# will get canonicalized. |
case $host---$target---$nonopt in |
NONE---*---* | *---NONE---* | *---*---NONE) ;; |
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; |
esac |
|
|
# Make sure we can run config.sub. |
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : |
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } |
fi |
|
echo $ac_n "checking host system type""... $ac_c" 1>&6 |
echo "configure:573: checking host system type" >&5 |
|
host_alias=$host |
case "$host_alias" in |
NONE) |
case $nonopt in |
NONE) |
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : |
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } |
fi ;; |
*) host_alias=$nonopt ;; |
esac ;; |
esac |
|
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` |
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$host" 1>&6 |
|
echo $ac_n "checking target system type""... $ac_c" 1>&6 |
echo "configure:594: checking target system type" >&5 |
|
target_alias=$target |
case "$target_alias" in |
NONE) |
case $nonopt in |
NONE) target_alias=$host_alias ;; |
*) target_alias=$nonopt ;; |
esac ;; |
esac |
|
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` |
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$target" 1>&6 |
|
echo $ac_n "checking build system type""... $ac_c" 1>&6 |
echo "configure:612: checking build system type" >&5 |
|
build_alias=$build |
case "$build_alias" in |
NONE) |
case $nonopt in |
NONE) build_alias=$host_alias ;; |
*) build_alias=$nonopt ;; |
esac ;; |
esac |
|
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` |
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$build" 1>&6 |
|
test "$host_alias" != "$target_alias" && |
test "$program_prefix$program_suffix$program_transform_name" = \ |
NONENONEs,x,x, && |
program_prefix=${target_alias}- |
|
|
trap '' 1 2 15 |
cat > confcache <<\EOF |
# This file is a shell script that caches the results of configure |
# tests run on this system so they can be shared between configure |
# scripts and configure runs. It is not useful on other systems. |
# If it contains results you don't want to keep, you may remove or edit it. |
# |
# By default, configure uses ./config.cache as the cache file, |
# creating it if it does not exist already. You can give configure |
# the --cache-file=FILE option to use a different cache file; that is |
# what configure does when it calls configure scripts in |
# subdirectories, so they share the cache. |
# Giving --cache-file=/dev/null disables caching, for debugging configure. |
# config.status only pays attention to the cache file if you give it the |
# --recheck option to rerun configure. |
# |
EOF |
# The following way of writing the cache mishandles newlines in values, |
# but we know of no workaround that is simple, portable, and efficient. |
# So, don't put newlines in cache variables' values. |
# Ultrix sh set writes to stderr and can't be redirected directly, |
# and sets the high bit in the cache file unless we assign to the vars. |
(set) 2>&1 | |
case `(ac_space=' '; set) 2>&1 | grep ac_space` in |
*ac_space=\ *) |
# `set' does not quote correctly, so add quotes (double-quote substitution |
# turns \\\\ into \\, and sed turns \\ into \). |
sed -n \ |
-e "s/'/'\\\\''/g" \ |
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" |
;; |
*) |
# `set' quotes correctly as required by POSIX, so do not add quotes. |
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' |
;; |
esac >> confcache |
if cmp -s $cache_file confcache; then |
: |
else |
if test -w $cache_file; then |
echo "updating cache $cache_file" |
cat confcache > $cache_file |
else |
echo "not updating unwritable cache $cache_file" |
fi |
fi |
rm -f confcache |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
test "x$prefix" = xNONE && prefix=$ac_default_prefix |
# Let make expand exec_prefix. |
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
|
# Any assignment to VPATH causes Sun make to only execute |
# the first set of double-colon rules, so remove it if not needed. |
# If there is a colon in the path, we need to keep it. |
if test "x$srcdir" = x.; then |
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' |
fi |
|
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 |
|
# Transform confdefs.h into DEFS. |
# Protect against shell expansion while executing Makefile rules. |
# Protect against Makefile macro expansion. |
cat > conftest.defs <<\EOF |
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g |
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g |
s%\[%\\&%g |
s%\]%\\&%g |
s%\$%$$%g |
EOF |
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` |
rm -f conftest.defs |
|
|
# Without the "./", some shells look in PATH for config.status. |
: ${CONFIG_STATUS=./config.status} |
|
echo creating $CONFIG_STATUS |
rm -f $CONFIG_STATUS |
cat > $CONFIG_STATUS <<EOF |
#! /bin/sh |
# Generated automatically by configure. |
# Run this file to recreate the current configuration. |
# This directory was configured as follows, |
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: |
# |
# $0 $ac_configure_args |
# |
# Compiler output produced by configure, useful for debugging |
# configure, is in ./config.log if it exists. |
|
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" |
for ac_option |
do |
case "\$ac_option" in |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" |
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; |
-version | --version | --versio | --versi | --vers | --ver | --ve | --v) |
echo "$CONFIG_STATUS generated by autoconf version 2.12.1" |
exit 0 ;; |
-help | --help | --hel | --he | --h) |
echo "\$ac_cs_usage"; exit 0 ;; |
*) echo "\$ac_cs_usage"; exit 1 ;; |
esac |
done |
|
ac_given_srcdir=$srcdir |
|
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 |
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
# Protect against being on the right side of a sed subst in config.status. |
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; |
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF |
$ac_vpsub |
$extrasub |
s%@SHELL@%$SHELL%g |
s%@CFLAGS@%$CFLAGS%g |
s%@CPPFLAGS@%$CPPFLAGS%g |
s%@CXXFLAGS@%$CXXFLAGS%g |
s%@DEFS@%$DEFS%g |
s%@LDFLAGS@%$LDFLAGS%g |
s%@LIBS@%$LIBS%g |
s%@exec_prefix@%$exec_prefix%g |
s%@prefix@%$prefix%g |
s%@program_transform_name@%$program_transform_name%g |
s%@bindir@%$bindir%g |
s%@sbindir@%$sbindir%g |
s%@libexecdir@%$libexecdir%g |
s%@datadir@%$datadir%g |
s%@sysconfdir@%$sysconfdir%g |
s%@sharedstatedir@%$sharedstatedir%g |
s%@localstatedir@%$localstatedir%g |
s%@libdir@%$libdir%g |
s%@includedir@%$includedir%g |
s%@oldincludedir@%$oldincludedir%g |
s%@infodir@%$infodir%g |
s%@mandir@%$mandir%g |
s%@CC@%$CC%g |
s%@host@%$host%g |
s%@host_alias@%$host_alias%g |
s%@host_cpu@%$host_cpu%g |
s%@host_vendor@%$host_vendor%g |
s%@host_os@%$host_os%g |
s%@target@%$target%g |
s%@target_alias@%$target_alias%g |
s%@target_cpu@%$target_cpu%g |
s%@target_vendor@%$target_vendor%g |
s%@target_os@%$target_os%g |
s%@build@%$build%g |
s%@build_alias@%$build_alias%g |
s%@build_cpu@%$build_cpu%g |
s%@build_vendor@%$build_vendor%g |
s%@build_os@%$build_os%g |
|
CEOF |
EOF |
|
cat >> $CONFIG_STATUS <<\EOF |
|
# Split the substitutions into bite-sized pieces for seds with |
# small command number limits, like on Digital OSF/1 and HP-UX. |
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. |
ac_file=1 # Number of current file. |
ac_beg=1 # First line for current file. |
ac_end=$ac_max_sed_cmds # Line after last line for current file. |
ac_more_lines=: |
ac_sed_cmds="" |
while $ac_more_lines; do |
if test $ac_beg -gt 1; then |
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file |
else |
sed "${ac_end}q" conftest.subs > conftest.s$ac_file |
fi |
if test ! -s conftest.s$ac_file; then |
ac_more_lines=false |
rm -f conftest.s$ac_file |
else |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds="sed -f conftest.s$ac_file" |
else |
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" |
fi |
ac_file=`expr $ac_file + 1` |
ac_beg=$ac_end |
ac_end=`expr $ac_end + $ac_max_sed_cmds` |
fi |
done |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds=cat |
fi |
EOF |
|
cat >> $CONFIG_STATUS <<EOF |
|
CONFIG_FILES=\${CONFIG_FILES-"Makefile"} |
EOF |
cat >> $CONFIG_STATUS <<\EOF |
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then |
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". |
case "$ac_file" in |
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` |
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; |
*) ac_file_in="${ac_file}.in" ;; |
esac |
|
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. |
|
# Remove last slash and all that follows it. Not all systems have dirname. |
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` |
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then |
# The file is in a subdirectory. |
test ! -d "$ac_dir" && mkdir "$ac_dir" |
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" |
# A "../" for each directory in $ac_dir_suffix. |
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` |
else |
ac_dir_suffix= ac_dots= |
fi |
|
case "$ac_given_srcdir" in |
.) srcdir=. |
if test -z "$ac_dots"; then top_srcdir=. |
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; |
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; |
*) # Relative path. |
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" |
top_srcdir="$ac_dots$ac_given_srcdir" ;; |
esac |
|
|
echo creating "$ac_file" |
rm -f "$ac_file" |
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." |
case "$ac_file" in |
*Makefile*) ac_comsub="1i\\ |
# $configure_input" ;; |
*) ac_comsub= ;; |
esac |
|
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` |
sed -e "$ac_comsub |
s%@configure_input@%$configure_input%g |
s%@srcdir@%$srcdir%g |
s%@top_srcdir@%$top_srcdir%g |
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file |
fi; done |
rm -f conftest.s* |
|
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
EOF |
cat >> $CONFIG_STATUS <<\EOF |
|
exit 0 |
EOF |
chmod +x $CONFIG_STATUS |
rm -fr confdefs* $ac_clean_files |
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 |
|
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 1765)
@@ -0,0 +1,32 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+EXECUTABLES = dollar hwwatchbus.bak pxdb reg reg-pa64 \
+ so-thresh genso-thresh sized-enum
+
+MISCELLANEOUS = so-thresh.c so-thresh.lopt so-thresh.make.out \
+ lib*-so-thresh.*
+
+all:
+ @echo "Nothing to be done for all..."
+
+info:
+install-info:
+dvi:
+install:
+uninstall: force
+installcheck:
+check:
+
+clean mostlyclean:
+ -rm -f *~ *.o *.ci
+ -rm -f core $(EXECUTABLES)
+ -rm -f $(MISCELLANEOUS)
+
+distclean maintainer-clean realclean: clean
+ -rm -f Makefile config.status config.log
+ -rm -f *-init.exp
+ -rm -fr *.log summary detail *.plog *.sum *.psum site.*
+
+Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in
+ $(SHELL) ./config.status --recheck
Index: so-thresh.mk
===================================================================
--- so-thresh.mk (nonexistent)
+++ so-thresh.mk (revision 1765)
@@ -0,0 +1,73 @@
+# Make file for so-thresh test
+
+OBJDIR=.
+SRCDIR=.
+CFLAGS = +DA1.1 -g
+
+# This is how to build this generator.
+genso-thresh.o: ${SRCDIR}/genso-thresh.c
+ $(CC) $(CFLAGS) -o genso-thresh.o -c ${SRCDIR}/genso-thresh.c
+genso-thresh: genso-thresh.o
+ $(CC) $(CFLAGS) -o genso-thresh genso-thresh.o
+
+# This is how to run this generator.
+# This target should be made before the 'all' target,
+# to ensure that the shlib sources are all available.
+require_shlibs: genso-thresh
+ if ! [ -a lib00-so-thresh.c ] ; then \
+ genso-thresh ; \
+ fi
+ if ! [ -a lib01-so-thresh.c ] ; then \
+ genso-thresh ; \
+ fi
+ if ! [ -a lib02-so-thresh.c ] ; then \
+ genso-thresh ; \
+ fi
+
+# This is how to build all the shlibs.
+# Be sure to first make the require_shlibs target!
+lib00-so-thresh.o: lib00-so-thresh.c
+ $(CC) $(CFLAGS) +Z -o lib00-so-thresh.o -c lib00-so-thresh.c
+lib00-so-thresh.sl: lib00-so-thresh.o
+ $(LD) $(LDFLAGS) -b -o lib00-so-thresh.sl lib00-so-thresh.o
+lib01-so-thresh.o: lib01-so-thresh.c
+ $(CC) $(CFLAGS) +Z -o lib01-so-thresh.o -c lib01-so-thresh.c
+lib01-so-thresh.sl: lib01-so-thresh.o
+ $(LD) $(LDFLAGS) -b -o lib01-so-thresh.sl lib01-so-thresh.o
+lib02-so-thresh.o: lib02-so-thresh.c
+ $(CC) $(CFLAGS) +Z -o lib02-so-thresh.o -c lib02-so-thresh.c
+lib02-so-thresh.sl: lib02-so-thresh.o
+ $(LD) $(LDFLAGS) -b -o lib02-so-thresh.sl lib02-so-thresh.o
+
+
+
+
+# For convenience, here's names for all pieces of all shlibs.
+SHLIB_SOURCES = \
+ lib00-so-thresh.c \
+ lib01-so-thresh.c \
+ lib02-so-thresh.c
+
+SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)
+SHLIBS = $(SHLIB_SOURCES:.c=.sl)
+SHLIB_NAMES = $(SHLIB_SOURCES:.c=)
+EXECUTABLES = $(SHLIBS) genso-thresh so-thresh
+OBJECT_FILES = $(SHLIB_OBJECTS) genso-thresh.o so-thresh.o
+
+shlib_objects: $(SHLIB_OBJECTS)
+shlibs: $(SHLIBS)
+
+# This is how to build the debuggable testcase that uses the shlibs.
+so-thresh.o: so-thresh.c
+ $(CC) $(CFLAGS) -o so-thresh.o -c so-thresh.c
+so-thresh: shlibs so-thresh.o
+ $(LD) $(LDFLAGS) -o so-thresh -lc -L${OBJDIR} -c so-thresh.lopt /opt/langtools/lib/end.o /lib/crt0.o so-thresh.o
+
+# Yeah, but you should first make the require_shlibs target!
+all: so-thresh genso-thresh
+
+# To remove everything built via this makefile...
+clean:
+ rm -f lib0*-so-thresh.*
+ rm -f *.o genso-thresh so-thresh.lopt so-thresh.c
+ rm -f so-thresh
Index: so-thresh.sh
===================================================================
--- so-thresh.sh (nonexistent)
+++ so-thresh.sh (revision 1765)
@@ -0,0 +1,34 @@
+#!/bin/ksh
+
+# so-thresh.sh
+#
+# This script is a "wrapper" to use the so-thresh.mk
+# Makefile. See the comments in so-thresh.exp
+# regarding why this script exists.
+
+#set -o xtrace
+#set -o verbose
+
+if [ "$srcdir" = "${srcdir#/}" ]
+then
+ srcdir="$PWD/$srcdir"
+fi
+
+if [ "$objdir" = "${objdir#/}" ]
+then
+ objdir="$PWD/$objdir"
+fi
+
+subdir="$1"
+
+HERE=$PWD
+cd $subdir
+
+MAKEFLAGS=
+make -f ${srcdir}/${subdir}/so-thresh.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir} > ${objdir}/${subdir}/so-thresh.make.out 2>&1
+STATUS=$?
+
+cd $HERE
+echo "return STATUS is $STATUS"
+
+exit $STATUS
so-thresh.sh
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: reg-pa64.s
===================================================================
--- reg-pa64.s (nonexistent)
+++ reg-pa64.s (revision 1765)
@@ -0,0 +1,104 @@
+; assemble as "as -o reg-pa64 reg-pa64.s"
+; or
+; cc -g -o +DA2.0W
+;
+; PA-RISC 2.0 register contents test.
+;
+ .level 2.0W
+
+ .code
+ .export main,ENTRY
+ .export mainend,CODE
+ .export lab1,CODE
+ .space $TEXT$
+ .subspa $CODE$
+one
+ .align 8
+ .stringz "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00"
+
+main
+ .proc
+ .callinfo NO_CALLS,FRAME=0
+ .entry
+
+ ;; Test we have right register numbers
+ ;;
+ ADD %r0,%r0,%r1 ; 0
+ LDI 1,%r1 ; 1
+ ;;
+ ;; Don't put anything into r2 or r3--they are special registers.
+ ;;
+ ADD %r1,%r1,%r4 ; 2
+ ADD %r4,%r4,%r5 ; 4
+ ADD %r5,%r5,%r6 ; 8
+ ADD %r6,%r6,%r7 ; 16
+ ADD %r7,%r7,%r8 ; 32
+ ADD %r8,%r8,%r9 ; 64
+ ADD %r9,%r9,%r10 ; 128
+ ADD %r10,%r10,%r11 ; 256
+ ADD %r11,%r11,%r12 ; 512
+ ADD %r12,%r12,%r13 ; 1024
+ ADD %r13,%r13,%r14 ; 2048
+ ADD %r14,%r14,%r15 ; 4096
+ ADD %r15,%r15,%r16 ; 9192
+
+ ;; Test high bits, to be sure we show them.
+ ;;
+ LDI 0xde,%r19 ; "de"
+ DEPD,Z %r19,55,56,%r19 ; "de00"
+ LDI 0xad,%r18 ; "ad"
+ ADD %r18,%r19,%r19 ; "dead"
+ DEPD,Z %r19,55,56,%r19 ; "dead00"
+ LDI 0xbe,%r18 ; "be"
+ ADD %r18,%r19,%r19 ; "deadbe"
+ DEPD,Z %r19,55,56,%r19 ; "deadbe00"
+ LDI 0xef,%r18 ; "ef"
+ ADD %r18,%r19,%r19 ; "deadbeef"
+ ;
+ DEPD,Z %r19,55,56,%r19 ; "deadbeef00"
+ LDI 0xba,%r18 ; "ba"
+ ADD %r18,%r19,%r19 ; "deadbeefba"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefba00"
+ LDI 0xdc,%r18 ; "dc"
+ ADD %r18,%r19,%r19 ; "deadbeefbadc"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefbadc00"
+ LDI 0xad,%r18 ; "ad"
+ ADD %r18,%r19,%r19 ; "deadbeefbadcad"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefbadcad00"
+ LDI 0xee,%r18 ; "ee"
+ ADD %r18,%r19,%r19 ; "deadbeefbadcadee"
+
+lab1 ;; Test floating point registers
+ ;;
+ ;; LDIL LR'one,%r22 ;
+ ;; FLDD RR'one(%r22),%fr4 ; 1.0
+ ;; FLDD RR'one+8(%r22),%fr5 ; 2.0
+ ;; FLDD RR'one+8(%r22),%fr6 ; 2.0
+ B,L here,%r2
+ NOP
+here DEPDI 0x0,63,2,%r2
+ LDO one-here(%r2),%r2
+ FLDD 0(%r2),%fr4
+ FLDD 8(%r2),%fr5
+ FLDD 8(%r2),%fr6
+
+ FMPY,DBL %fr5,%fr6,%fr7 ; 4.0
+ FMPY,DBL %fr6,%fr7,%fr8 ; 8.0
+ FMPY,DBL %fr7,%fr8,%fr9 ; 32.0
+ FMPY,DBL %fr8,%fr9,%fr10 ; 256.0
+
+ ;; The NOP prevents anything from end.o or crt0.o from
+ ;; being appended immediately after "mainend". If that
+ ;; happens, then we may have other labels that have the
+ ;; same address as "mainend", and thus the debugger
+ ;; may symbolize this PC to something other than "mainend".
+mainend
+ NOP
+ .exit
+ .procend
+
+ .space $TEXT$
+ .subspa $CODE$
+ .subspa $LIT$ ;; ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
+ .end
+
Index: configure.in
===================================================================
--- configure.in (nonexistent)
+++ configure.in (revision 1765)
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory. For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(dollar.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
Index: genso-thresh.c
===================================================================
--- genso-thresh.c (nonexistent)
+++ genso-thresh.c (revision 1765)
@@ -0,0 +1,229 @@
+/*
+ * Program to generate the so-thresh testcase,
+ * including associated linked-against shared libraries.
+ * Build as:
+ *
+ * cc -g -o genso-thresh genso-thresh.c
+ *
+ * Invoke as:
+ *
+ * genso-thresh
+ *
+ * It will put all the code in the current directory (".").
+ *
+ * A makefile can also be generated if the -makemake option is used.
+ * To use the makefile:
+ *
+ * make -f so-thresh.mk all
+ *
+ * The name of the application is
+ *
+ * so-thresh
+ *
+ * (Revised from a program by John Bishop. --rehrauer)
+ */
+
+#include
+#include
+#include
+
+int main (argc, argv)
+int argc;
+char **argv;
+{
+#define NUMBER_OF_INT_VARS 1500
+#define NUMBER_OF_LIBS 3
+ int lib_num = NUMBER_OF_LIBS;
+ int i;
+ int i2;
+ FILE *main_file;
+ FILE *lib_file;
+ FILE *make_file;
+ FILE *link_file;
+
+ char testcase_name [1000];
+ char linkfile_name [1000];
+ char makefile_name [1000];
+ char mainfile_name [1000];
+
+ char file_name[100];
+ /*
+ * 0123456789 <-- length of field
+ * "./fil0000000002.c"; <-- typical filename
+ * 12345678901234567890 <-- length of string
+ * 10 20
+ * ^where null goes
+ */
+ char file_name_core[100];
+
+ /* Verify input.
+ */
+ if ((argc < 1) || (argc > 2) || (argv == NULL) ||
+ ((argc == 2) && (strcmp (argv[1], "-makemake") != 0)))
+ {
+ printf ("** Syntax: %s [-makemake]\n", argv[0]);
+ return;
+ }
+
+ if (strncmp (argv[0], "gen", 3) != 0)
+ {
+ printf ("** This tool expected to be named \"gen\"\n");
+ return;
+ }
+ strcpy (testcase_name, argv[0]+3);
+
+ strcpy (linkfile_name, testcase_name);
+ strcat (linkfile_name, ".lopt");
+ link_file = fopen (linkfile_name, "w");
+ fprintf (link_file, "# Linker options for %s test\n", testcase_name);
+
+ /* Generate the makefile, if requested.
+ */
+ if (argc == 2)
+ {
+ strcpy (makefile_name, testcase_name);
+ strcat (makefile_name, ".mk.new");
+ make_file = fopen (makefile_name, "w");
+ printf (" Note: New makefile (%s) generated.\n", makefile_name);
+ printf (" May want to update existing makefile, if any.\n");
+ fprintf (make_file, "# Generated automatically by %s\n", argv[0]);
+ fprintf (make_file, "# Make file for %s test\n", testcase_name);
+ fprintf (make_file, "\n");
+ fprintf (make_file, "CFLAGS = +DA1.1 -g\n");
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# This is how to build this generator.\n");
+ fprintf (make_file, "%s.o: %s.c\n", argv[0], argv[0]);
+ fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", argv[0], argv[0]);
+ fprintf (make_file, "%s: %s.o\n", argv[0], argv[0]);
+ fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s %s.o\n", argv[0], argv[0]);
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# This is how to run this generator.\n");
+ fprintf (make_file, "# This target should be made before the 'all' target,\n");
+ fprintf (make_file, "# to ensure that the shlib sources are all available.\n");
+ fprintf (make_file, "require_shlibs: %s\n", argv[0]);
+ for (i=0; i < lib_num; i++)
+ {
+ fprintf (make_file, "\tif ! [ -a lib%2.2d_%s.c ] ; then \\\n", i, testcase_name);
+ fprintf (make_file, "\t %s ; \\\n", argv[0]);
+ fprintf (make_file, "\tfi\n");
+ }
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# This is how to build all the shlibs.\n");
+ fprintf (make_file, "# Be sure to first make the require_shlibs target!\n");
+ for (i=0; i < lib_num; i++)
+ {
+ fprintf (make_file, "lib%2.2d_%s.o: lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
+ fprintf (make_file, "\t$(CC) $(CFLAGS) +Z -o lib%2.2d_%s.o -c lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
+ fprintf (make_file, "lib%2.2d-%s.sl: lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
+ fprintf (make_file, "\t$(LD) $(LDFLAGS) -b -o lib%2.2d-%s.sl lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
+ }
+ fprintf (make_file, "\n");
+fprintf (make_file, "# For convenience, here's names for all pieces of all shlibs.\n");
+ fprintf (make_file, "SHLIB_SOURCES = \\\n");
+ for (i=0; i < lib_num-1; i++)
+ fprintf (make_file, "\tlib%2.2d-%s.c \\\n", i, testcase_name);
+ fprintf (make_file, "\tlib%2.2d-%s.c\n", lib_num-1, testcase_name);
+ fprintf (make_file, "SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)\n");
+ fprintf (make_file, "SHLIBS = $(SHLIB_SOURCES:.c=.sl)\n");
+ fprintf (make_file, "SHLIB_NAMES = $(SHLIB_SOURCES:.c=)\n");
+ fprintf (make_file, "EXECUTABLES = $(SHLIBS) %s %s\n", argv[0], testcase_name);
+ fprintf (make_file, "OBJECT_FILES = $(SHLIB_OBJECTS) %s.o %s.o\n", argv[0], testcase_name);
+ fprintf (make_file, "\n");
+ fprintf (make_file, "shlib_objects: $(SHLIB_OBJECTS)\n");
+ fprintf (make_file, "shlibs: $(SHLIBS)\n");
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# This is how to build the debuggable testcase that uses the shlibs.\n");
+ fprintf (make_file, "%s.o: %s.c\n", testcase_name, testcase_name);
+ fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", testcase_name, testcase_name);
+ fprintf (make_file, "%s: shlibs %s.o\n", testcase_name, testcase_name);
+ fprintf (make_file, "\t$(LD) $(LDFLAGS) -o %s -lc -L. ", testcase_name);
+ fprintf (make_file, "-c %s /opt/langtools/lib/end.o /lib/crt0.o %s.o\n", linkfile_name, testcase_name);
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# Yeah, but you should first make the require_shlibs target!\n");
+ fprintf (make_file, "all: %s %s\n", testcase_name, argv[0]);
+ fprintf (make_file, "\n");
+ fprintf (make_file, "# To remove everything built via this makefile...\n");
+ fprintf (make_file, "clean:\n");
+ /* Do this carefully, to avoid hitting silly HP-UX ARG_MAX limits... */
+ fprintf (make_file, "\trm -f lib0*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib1*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib2*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib3*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib4*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib5*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib6*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib7*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib8*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f lib9*-%s.*\n", testcase_name);
+ fprintf (make_file, "\trm -f %s %s %s %s.c\n", argv[0], testcase_name, linkfile_name, testcase_name);
+ fprintf (make_file, "\n");
+ fclose (make_file);
+ }
+
+ /* Generate the code for the libraries.
+ */
+ for (i=0; i < lib_num; i++) {
+
+ /* Generate the names for the library.
+ */
+ sprintf (file_name, "lib%2.2d-%s.c", i, testcase_name);
+ sprintf (file_name_core, "lib%2.2d-%s", i, testcase_name);
+
+ /* Generate the source code.
+ */
+ lib_file = fopen (file_name, "w");
+ fprintf (lib_file, "/* Shared library file number %d */\n", i);
+ fprintf (lib_file, "#include \n\n");
+ fprintf (lib_file, "/* The following variables largely exist to bloat this library's debug info. */\n");
+ fprintf (lib_file, "static char c_static_buf_%d [100];\n", i);
+ for (i2=0; i2\n\n");
+
+ for (i = 0; i < lib_num; i++) {
+ fprintf (main_file, "extern int r_%d();\n", i);
+ }
+
+ fprintf (main_file, "\n");
+ fprintf (main_file, "int main()\n");
+ fprintf (main_file, "{\n");
+ fprintf (main_file, " int accum;\n");
+ fprintf (main_file, " int lib_num = %d;\n", lib_num);
+
+ for (i = 0; i < lib_num; i++) {
+ fprintf (main_file, " accum += r_%d();\n", i);
+ }
+
+ fprintf (main_file, " printf( \"Final value: %%d, should be %%d\\n\", accum, lib_num );\n\n");
+ fprintf (main_file, " return 0;\n");
+ fprintf (main_file, "}\n\n");
+ fprintf (main_file, "/* end of generated file */\n");
+ fclose (main_file);
+
+ /* Finish up the link file and the build file
+ */
+ fclose (link_file);
+}
+
+/* End of file */
Index: pxdb.exp
===================================================================
--- pxdb.exp (nonexistent)
+++ pxdb.exp (revision 1765)
@@ -0,0 +1,128 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+# This file is part of the gdb testsuite
+
+
+# pxdb.exp Test that gdb calls pxdb on an application
+# built without it.
+#
+if $tracelevel then {
+ strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+if { [skip_hp_tests] } then { continue }
+
+set testfile pxdb
+set srcfile ${testfile}.c
+set objfile ${objdir}/${subdir}/${testfile}.o
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+ return -1;
+}
+
+if { $gcc_compiled } then { continue }
+
+# To build a non-pxdb-ed file, use
+#
+#
+# export LD_PXDB /dev/null
+# ld -o hello_no_pxdb hello.o /opt/langtools/lib/end.o /usr/ccs/lib/crt0.o -lc
+#
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# use this to debug:
+#log_user 1
+
+
+# Following should get the error message:
+#
+# ld: (Warning) Can't exec pxdb using path: /dev/null
+#
+#execute_anywhere "ksh -c \"export LD_PXDB=/dev/null\""
+
+if [istarget "hppa2.0w-*-*"] {
+set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /opt/langtools/lib/pa20_64/crt0.o /opt/langtools/lib/pa20_64/end.o -lc\""
+} else {
+set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /usr/ccs/lib/crt0.o /opt/langtools/lib/end.o -lc\""
+}
+
+remote_exec build "rm ${binfile}"
+remote_exec build $cmdline
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We expect to see this:
+#
+# "warning: File not processed by pxdb--about to process now.
+# "
+# ".
+# "Procedures: 7
+# "Files: 2
+# "Reading symbols from ~/c_code.dir/hello_no_pxdb...done.
+# "(gdb)
+#
+send_gdb "file ${binfile}\n"
+gdb_expect {
+
+ -re ".*warning: File not processed by pxdb.*Procedures: \[0-9\]+.*$gdb_prompt $"\
+ { pass "PXDB call" }
+
+ -re "$gdb_prompt $" {
+ if [istarget hppa*-*-hpux*] {
+ pass "Didn't call pxdb"
+ } else {
+ fail "Didn't call pxdb"
+ }
+ }
+
+ -re ".*$gdb_prompt $" { fail "Some other message" }
+
+ timeout { fail "call pxdb (timeout)" }
+}
+
+# Make sure the new data makes sense
+#
+if { ![runto callee] } then { return }
+
+send_gdb "print x\n"
+gdb_expect {
+ -re ".*= 1.*$gdb_prompt $" { pass "Good data after pxdb call" }
+ -re ".*$gdb_prompt $" { fail "No data after pxdb call" }
+ timeout { fail "(timeout)" }
+}
+
+gdb_exit
+return 0
+
+
+
+
+
Index: dollar.c
===================================================================
--- dollar.c (nonexistent)
+++ dollar.c (revision 1765)
@@ -0,0 +1,10 @@
+#ifdef PROTOTYPES
+int main (int argc, char **argv)
+#else
+main (argc, argv, envp)
+ int argc;
+ char **argv;
+#endif
+{
+ return 0;
+}
Index: hwwatchbus.c
===================================================================
--- hwwatchbus.c (nonexistent)
+++ hwwatchbus.c (revision 1765)
@@ -0,0 +1,9 @@
+/* This program raises a SIGBUS signal on HP-UX when the
+ pointer "bogus_p" is dereferenced.
+ */
+int * bogus_p = (int *)3;
+
+int main()
+{
+ *bogus_p = 0xdeadbeef;
+}
Index: sized-enum.c
===================================================================
--- sized-enum.c (nonexistent)
+++ sized-enum.c (revision 1765)
@@ -0,0 +1,43 @@
+
+enum Normal {
+ red,
+ blue,
+ green
+};
+
+short enum Small {
+ pink,
+ cyan,
+ grey
+};
+
+char enum Tiny {
+ orange,
+ yellow,
+ brown
+};
+
+
+main()
+{
+ enum Normal normal[3];
+ short enum Small small[3];
+ char enum Tiny tiny[3];
+ int i;
+
+ for (i=0; i < 3; i++)
+ {
+ normal[i] = (enum Normal) i;
+ small[i] = (short enum Small) i;
+ tiny[i] = (char enum Tiny) i;
+ }
+ normal[0] = 0; /* place to hang a breakpoint */
+}
+
+
+
+
+
+
+
+
Index: so-thresh.exp
===================================================================
--- so-thresh.exp (nonexistent)
+++ so-thresh.exp (revision 1765)
@@ -0,0 +1,346 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+ strace $tracelevel
+ }
+
+set prms_id 0
+set bug_id 0
+
+if { [skip_hp_tests] } then { continue }
+
+set testfile "so-thresh"
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+ return -1
+}
+
+# This testcase is relatively large, and therefore can take awhile to
+# load. We'd best set the timeout to something suitable, or we may
+# seem to fail...
+#
+set timeout 60
+
+# Build procedure for this testcase:
+# ${srcdir}/${subdir}/so-thresh.sh ${subdir}
+# which calls,
+# make -f ${srcdir}/${subdir}/so-thresh.mk
+# which builds,
+# genso-thresh (from genso-thresh.c)
+# which generates,
+# lib00-so-thresh.c
+# lib01-so-thresh.c
+# lib02-so-thresh.c
+# so-thresh.lopt (link options file)
+# lib0*-so-thresh.sl (from .c files above)
+# so-thresh (from so-thresh.c)
+# using lib0*-so-thresh.sl and so-thresh.lopt
+#
+# Since so-thresh.mk requires SRCDIR and OBJDIR macro definitions,
+# and SRCDIR / OBJDIR could be in relative path format, we use
+# so-thresh.sh script to pin down SRCDIR / OBJDIR (using $PWD/ prefix
+# when detected relative path values for srcdir / objdir), before the
+# 'cd $subdir' call (when this can be done in TCL here, we can call
+# make directly instead).
+#
+# remote_exec build "sh -c \\\"cd ${objdir}/${subdir}\\; make -v -f ${srcdir}/${subdir}/${testfile}.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir}\\\""
+
+send_user "Making with '${srcdir}/${subdir}/${testfile}.sh $subdir ...\n"
+remote_exec build "${srcdir}/${subdir}/${testfile}.sh $subdir"
+
+# Only HP-UX (and any other platforms using SOM shared libraries, I
+# guess) interprets the auto-solib-add variable as a threshhold,
+# rather than a boolean that strictly enables or disables automatic
+# loading of shlib symbol tables.
+#
+# On HP-UX, it is the size threshhold (in megabytes) at which to
+# stop auto loading of symbol tables.
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+ setup_xfail "*-*-*"
+}
+
+# Start with a fresh gdb
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This is a test of gdb's ability on HP-UX to stop automatically
+# loading symbols of shared libraries, when the total size of the
+# debugger's symbol table reaches a specified threshhold.
+#
+
+# On HP-UX, the help text for auto-solib-add mentions that it
+# serves as a threshhold.
+#
+send_gdb "help set auto-solib-add\n"
+gdb_expect {
+ -re "Set autoloading size threshold .in megabytes. of shared library symbols.*
+If nonzero, symbols from all shared object libraries will be loaded.*
+automatically when the inferior begins execution or when the dynamic linker.*
+informs gdb that a new library has been loaded, until the symbol table.*
+of the program and libraries exceeds this threshold.*
+Otherwise, symbols must be loaded manually, using `sharedlibrary'.*$gdb_prompt $"\
+ {pass "help set auto-solib-add"}
+ -re "$gdb_prompt $"\
+ {fail "help set auto-solib-add"}
+ timeout {fail "(timeout) help set auto-solib-add"}
+}
+
+# On HP-UX, the threshhold is by default set to 50, which means
+# 50 megabytes.
+#
+send_gdb "show auto-solib-add\n"
+gdb_expect {
+ -re "Autoloading size threshold .in megabytes. of shared library symbols is $decimal.*$gdb_prompt $"\
+ {pass "show auto-solib-add "}
+ -re "Autoloading size threshold \(in megabytes\) of shared library symbols is $decimal.$gdb_prompt $"\
+ {pass "show auto-solib-add "}
+ -re "$gdb_prompt $"\
+ {fail "show auto-solib-add "}
+ timeout {fail "(timeout) show auto-solib-add "}
+}
+
+send_gdb "set auto-solib-add 1\n"
+gdb_expect {
+ -re ".*$gdb_prompt $"
+ {pass "set auto-solib-add to 1"}
+ -re ".*$gdb_prompt $"
+ {fail "set auto-solib-add to 1"}
+ timeout {fail "(timeout) set auto-solib-add to 1"}
+}
+
+
+# We have manually verified that our testcase exceeds 1 Mbytes
+# of heap space in GDB to hold the symbols for the main program
+# and all associated linked-against libraries. Thus, when we
+# run to the program's main, and therefore notice all the linked-
+# against shlibs, we expect to hit the threshhold.
+#
+# (Note that we're not using the expect [runto main] function here,
+# 'cause we want to match on output from the run command.
+#
+send_gdb "break main\n"
+gdb_expect {
+ -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+ {pass "1 set break at main"}
+ -re "$gdb_prompt $"\
+ {fail "1 set break at main"}
+ timeout {fail "(timeout) 1 set break at main"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+ -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+ {pass "run to main hit auto-solib-add threshold"}
+ -re "$gdb_prompt $"\
+ {fail "run to main hit auto-solib-add threshold"}
+ timeout {fail "(timeout) run to main hit auto-solib-add threshold"}
+}
+
+# Verify that "info share" mentions something about libraries whose
+# symbols weren't loaded.
+#
+# We'll assume that at least the last two shlib's symbols weren't
+# loaded. As a side-effect of matching this pattern, the text start
+# address of the last one is captured in expect_out(1,string).
+# (we'll need it for the 'add-symbol-file' command in a nonce...)
+#
+send_gdb "info sharedlibrary\n"
+gdb_expect {
+ -re ".*lib01_$testfile.sl .*symbols not loaded.*0x\[0-9\]* (0x\[0-9a-fA-F\]*).*$gdb_prompt $"\
+ { send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
+ gdb_expect {
+ -re "add symbol table.*y or n.*$"\
+ {send_gdb "y\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "add-symbol-file and info sharedlib"}
+ timeout {fail "(timeout) add-symbol-file and info sharedlib"}
+ }}
+ -re "$gdb_prompt $"\
+ {fail "add-symbol-file and info sharedlib"}
+ timeout {fail "(timeout) add-symbol-file and info sharedlib"}
+ }
+ }
+ -re "$gdb_prompt $" {
+ setup_xfail hppa*-*-* CHFts24108
+ fail "info sharedlibrary shows shlibs with unloaded symbols"
+ }
+ timeout {fail "(timeout) info sharedlibrary shows shlibs with unloaded symbols"}
+}
+
+# Verify that we can manually load the symbol table of a library
+# whose symbols weren't loaded. (We'll pick the last one.)
+#
+
+# I moved this test inside the one above, because the expect_out array is not ok if the
+# previous test has failed, and expect would error out (elz)
+#
+#send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
+#gdb_expect {
+# -re "add symbol table.*y or n.*$"\
+# {send_gdb "y\n"
+# gdb_expect {
+# -re "$gdb_prompt $" {pass "add-symbol-file"}
+# timeout {fail "(timeout) add-symbol-file"}
+# }}
+# -re "$gdb_prompt $"\
+# {fail "add-symbol-file"}
+# timeout {fail "(timeout) add-symbol-file"}
+#}
+
+# Verify that we can manually load the symbols for all libraries
+# which weren't already loaded.
+#
+# Warning! On a machine with little free swap space, this may
+# fail!
+#
+send_gdb "sharedlibrary\n"
+gdb_expect {
+ -re "Reading symbols from.*done.*$gdb_prompt $"\
+ {pass "sharedlibrary"}
+ -re "$gdb_prompt $" {
+ setup_xfail hppa*-*-* CHFts24108
+ fail "sharedlibrary"
+ }
+ timeout {fail "(timeout) sharedlibrary"}
+}
+
+# Rerun the program, this time verifying that we can set the
+# threshhold high enough to avoid hitting it.
+#
+# It appears that gdb isn't freeing memory when rerunning, as one
+# would expect. To avoid potentially hitting a virtual memory
+# ceiling, start with a fresh gdb.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+send_gdb "break main\n"
+gdb_expect {
+ -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+ {pass "2 set break at main"}
+ -re "$gdb_prompt $"\
+ {fail "2 set break at main"}
+ timeout {fail "(timeout) 2 set break at main"}
+}
+
+send_gdb "set auto-solib-add 9999\n"
+gdb_expect {
+ -re "$gdb_prompt $"\
+ {pass "set auto-solib-add threshold to practical infinity"}
+ timeout {fail "(timeout) set auto-solib-add threshold to practical infinity"}
+}
+send_gdb "run\n"
+gdb_expect {
+ -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+ {fail "rerun threshold at practical infinity (still hit threshold)"}
+ -re "$gdb_prompt $"\
+ {pass "rerun with threshold at practical infinity"}
+ timeout {fail "(timeout) rerun with threshold at practical infinity"}
+}
+
+# Rerun the program, this time altogether disabling the auto loading
+# feature. There should be no information at all about shared
+# libraries now.
+#
+# ??rehrauer: Personally, I'd call that a bug, since it doesn't give
+# you the ability to manually load single shlibs (you need the text
+# start address that 'info share' normall gives you). On the other
+# hand, one can easily choose to load them all...
+#
+# It appears that gdb isn't freeing memory when rerunning, as one
+# would expect. To avoid potentially hitting a virtual memory
+# ceiling, start with a fresh gdb.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+send_gdb "break main\n"
+gdb_expect {
+ -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+ {pass "3 set break at main"}
+ -re "$gdb_prompt $"\
+ {fail "3 set break at main"}
+ timeout {fail "(timeout) 3 set break at main"}
+}
+
+send_gdb "set auto-solib-add 0\n"
+gdb_expect {
+ -re "$gdb_prompt $"\
+ {pass "set auto-solib-add threshold to 0"}
+ timeout {fail "(timeout) set auto-solib-add threshold to 0"}
+}
+send_gdb "run\n"
+gdb_expect {
+ -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+ {fail "rerun threshold at 0 (still hit threshold)"}
+ -re "$gdb_prompt $"\
+ {pass "rerun with threshold at 0"}
+ timeout {fail "(timeout) rerun with threshold at 0"}
+}
+
+# Verify that we can still manually load symbols for all libraries.
+# (We'll assume that if the last shlib's symbols are loaded, that
+# all of them were.)
+#
+# Note that we set the GDB "height" variable to prevent GDB from
+# prompting
+#
+# Warning! On a machine with little free swap space, this may
+# fail!
+#
+send_gdb "set height 9999\n"
+gdb_expect {
+ -re "$gdb_prompt $"\
+ {pass "set screen page height to practical infinity"}
+ timeout {fail "(timeout) set screen page height to practical infinity"}
+}
+send_gdb "sharedlibrary\n"
+gdb_expect {
+ -re ".*Reading symbols from .*/lib02-so-thresh\\.sl\\.\\.\\.done\\..*$gdb_prompt $"\
+ {pass "manually load all symbols"}
+ -re "$gdb_prompt $" {
+ setup_xfail hppa*-*-* CHFts24108
+ fail "manually load all symbols (CHFts24108)"
+ }
+ timeout {fail "(timeout) manually load all symbols"}
+}
+
+return 0
Index: reg.exp
===================================================================
--- reg.exp (nonexistent)
+++ reg.exp (revision 1765)
@@ -0,0 +1,192 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Tests of wide register displays for GDB on HPPA 2.0 machines
+
+# use this to debug:
+#log_user 1
+
+if $tracelevel then {
+ strace $tracelevel
+ }
+
+if { [skip_hp_tests] } then { continue }
+
+set testfile "reg"
+
+if [istarget "hppa2.0w-hp-hpux*"] {
+ verbose "reg.exp is not for PA2.0W."
+ return 0
+}
+set srcfile ${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+
+# To build a pa 2.0 executable
+#
+# as -o reg reg.s
+# or
+# cc -g -o reg reg.s
+#
+# The +DA2.0N flag doesn't seem to be needed.
+#
+# Don't reject if there are warnings, as we expect this warning:
+#
+# (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected.
+# The linked output may not run on a PA 1.x system.
+#
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# test machine--there's no 2.0n architecture, so we have
+# to try to run the app.
+#
+send_gdb "break main\n"
+ gdb_expect {
+ -re "Breakpoint.*$gdb_prompt $" {
+ pass "initial set-up"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "initial set-up"
+ }
+ timeout {
+ fail "initial set-up (timeout)"
+ }
+ }
+
+send_gdb "run\n"
+ gdb_expect {
+ -re ".*Executable file incompatible with hardware.*$gdb_prompt $" {
+ # Not hppa2.0 machine
+ #
+ return 0
+ }
+ -re "Cannot exec.*$gdb_prompt $" {
+ # Not hppa2.0 machine
+ #
+ return 0
+ }
+ -re ".*Starting program:.*$gdb_prompt $" {
+ pass "Ready to start test"
+ }
+ timeout {
+ fail "initial set-up, part 2 (timeout)"
+ return 0
+ }
+ }
+
+# Let the program set known values. This secretly deletes
+# the breakpoint at main and re-runs to mainend.
+#
+runto mainend
+
+# Look for known values
+#
+gdb_test "info reg r1" "r1 1"
+gdb_test "info reg r4" "r4 2"
+gdb_test "info reg r5" "r5 4"
+gdb_test "info reg r6" "r6 8"
+gdb_test "info reg r7" "r7 10"
+gdb_test "info reg r8" "r8 20"
+gdb_test "info reg r9" "r9 40"
+gdb_test "info reg r10" "r10 80"
+gdb_test "info reg r11" "r11 100"
+gdb_test "info reg r12" "r12 200"
+gdb_test "info reg r13" "r13 400"
+gdb_test "info reg r14" "r14 800"
+gdb_test "info reg r15" "r15 1000"
+gdb_test "info reg r16" "r16 2000"
+
+# Two odd variants that GDB supports are:
+# "1" means "r1", and
+# "$1" means "r1"
+#
+gdb_test "info reg 1 4" "r1 1.*r4 2"
+gdb_test "info reg \$1" "r1 1"
+
+# Verify that GDB responds gracefully to a register ID number that
+# is out of range.
+#
+gdb_test "info reg 999" "999: invalid register"
+
+# Make sure the floating point status and error registers
+# don't show up as floating point numbers!
+#
+gdb_test "info reg fpsr" ".*fpsr 0.*" "fpsr"
+gdb_test "info reg fpe1" ".*fpe1 0.*" "fpe1"
+gdb_test "info reg fpe2" ".*fpe2 0.*" "fpe2"
+gdb_test "info reg fpe3" ".*fpe3 0.*" "fpe3"
+gdb_test "info reg fpe4" ".*fpe4 0.*" "fpe4"
+gdb_test "info reg fpe5" ".*fpe5 0.*" "fpe5"
+gdb_test "info reg fpe6" ".*fpe6 0.*" "fpe6"
+gdb_test "info reg fpe7" ".*fpe7 0.*" "fpe7"
+
+gdb_test "info reg fr4" ".*fr4.*(double precision).* 1"
+gdb_test "info reg fr5" ".*fr5.*(double precision).* 2"
+gdb_test "info reg fr6" ".*fr6.*(double precision).* 2"
+gdb_test "info reg fr7" ".*fr7.*(double precision).* 4"
+gdb_test "info reg fr8" ".*fr8.*(double precision).* 8"
+gdb_test "info reg fr9" ".*fr9.*(double precision).* 32"
+gdb_test "info reg fr10" ".*fr10.*(double precision).* 256"
+
+gdb_test "info reg r19" "r19 deadbeefbadcadee"
+
+# Need to add test of use of $
+#
+# Q: How do you say a literal "$" in expect?
+# A: You say "\$". A literal "\" is "\\".
+#
+# Please note that this test will fail as long as we are running
+# in 32-bit mode: it will produce "$1 = 0xbadcadee". To fix it
+# would require building a real 64-bit gdb (expression evaluation,
+# in particular).
+#
+send_gdb "p/x \$r19\n"
+ gdb_expect {
+ -re ".*= 0xdeadbeefbadcadee.*$gdb_prompt $" {
+ pass "64-bit works"
+ }
+ -re ".*= 0xbadcadee.*$gdb_prompt $" {
+ pass "32-bit extract when using PRINT; expected but not good"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "didn't print any part of right value"
+ }
+ timeout {
+ fail "timeout on print"
+ }
+ }
+
+# Need to add tests of setting wide regs too. E.g.
+#
+# set $r4 = 0x1234567890123456
+# p/x $r4
+#
+
+# done
+#
+gdb_exit
+
+return 0
Index: dollar.exp
===================================================================
--- dollar.exp (nonexistent)
+++ dollar.exp (revision 1765)
@@ -0,0 +1,155 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# GDB tests for names beginning with '$'
+
+# This is aimed at HP-UX systems where a lot of system
+# routines and names begin with '$' or '$$'. GDB 4.16 was
+# unable to deal with these names as they clashed with
+# convenience variables. Wildebeest should accept such
+# names in preference to convenience variables.
+
+# This file was written by Satish Pai
+# 1997-09-24
+
+if $tracelevel then {
+ strace $tracelevel
+ }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+if { [skip_hp_tests] } { continue }
+
+set testfile "dollar"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#source ${binfile}.ci
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+ perror "couldn't run to breakpoint"
+ continue
+}
+
+# Test for millicode routines
+# hppa2.0w does not support dyncall
+if ![istarget "hppa2.0w*-*-*"] {
+send_gdb "print \$\$dyncall\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \\{\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall" }
+ -re "\\$\[0-9\]* = \\{\\} $hex <.*dyncall>.*$gdb_prompt $" { pass "print \$\$dyncall" }
+ -re "\\$\[0-9\]* = void" { fail "print \$\$dyncall -- interpreted as convenience var" }
+ -re "$gdb_prompt $" { fail "print \$\$dyncall" }
+ timeout { fail "(timeout) print \$\$dyncall" }
+}
+send_gdb "print \$\$dyncall_external\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \\{\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall_external" }
+ -re "\\$\[0-9\]* = \\{\\} $hex <.*dyncall_external>.*$gdb_prompt $" { pass "print \$\$dyncall_external" }
+ -re "\\$\[0-9\]* = void" { fail "print \$\$dyncall_external -- interpreted as convenience var" }
+ -re "$gdb_prompt $" { fail "print \$\$dyncall_external" }
+ timeout { fail "(timeout) print \$\$dyncall_external" }
+}
+
+# Set a breakpoint on a millicode routine
+send_gdb "break \$\$dyncall\n"
+gdb_expect {
+ -re "Breakpoint \[0-9\]* at $hex.*$gdb_prompt $" { pass "break \$\$dyncall" }
+ -re "Function.*not defined.*$gdb_prompt $" {fail "break \$\$dyncall -- no \$\$dyncall?" }
+ -re "Convenience variables used in line specs must have integer values\\..*$gdb_prompt $" {
+ fail "break \$\$dyncall -- treated as convenince variable"
+ }
+ -re "$gdb_prompt $" { fail "print break \$\$dyncall" }
+ timeout { fail "(timeout) print break \$\$dyncall" }
+}
+
+# Disassemble $$dyncall
+send_gdb "disassemble \$\$dyncall\n"
+gdb_expect {
+ -re "Dump of assembler code for function.*$gdb_prompt $" { pass "disas \$\$dyncall" }
+ -re "$gdb_prompt $" { fail "disas \$\$dyncall" }
+ timeout { fail "(timeout) disas \$\$dyncall" }
+}
+
+# Try to set $$dyncall like a convenience var.
+send_gdb "set \$\$dyncall = 77\n"
+gdb_expect {
+ -re "Invalid cast.*$gdb_prompt $" { pass "set \$\$dyncall = 77" }
+ -re "$gdb_prompt $" { fail "set \$\$dyncall = 77" }
+ timeout { fail "(timeout) set \$\$dyncall = 77" }
+}
+}
+
+# Try out some other $ name, not millicode
+if [istarget "hppa2.0w*-*-*"] {
+ #hppa2.0w uses __argv instead of $ARGV.
+ send_gdb "print \__argv\n"
+ gdb_expect {
+ -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \__argv" }
+ -re "\\$\[0-9\]* = void.*$gdb_prompt $" {
+ fail "print \__argv (interpreted as convenience var)"
+ }
+ -re "$gdb_prompt $" { fail "print \__argv" }
+ timeout { fail "(timeout) print \__argv" }
+ }
+
+ send_gdb "ptype \__argv\n"
+ gdb_expect {
+ -re "type = .*$gdb_prompt $" {
+ pass "ptype \__argv"
+ }
+ -re "type = void.*$gdb_prompt $" {
+ fail "ptype \__argv (interpreted as convenience var)"
+ }
+ -re "$gdb_prompt $" { fail "ptype \__argv" }
+ timeout { fail "(timeout) ptype \__argv" }
+ }
+} else {
+send_gdb "print \$ARGV\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \$ARGV" }
+ -re "\\$\[0-9\]* = void.*$gdb_prompt $" { fail "print \$ARGV (interpreted as convenience var)" }
+ -re "$gdb_prompt $" { fail "print \$ARGV" }
+ timeout { fail "(timeout) print \$ARGV" }
+}
+send_gdb "ptype \$ARGV\n"
+gdb_expect {
+ -re "type = .*$gdb_prompt $" { pass "ptype \$ARGV" }
+ -re "type = void.*$gdb_prompt $" { fail "ptype \$ARGV (interpreted as convenience var)" }
+ -re "$gdb_prompt $" { fail "ptype \$ARGV" }
+ timeout { fail "(timeout) ptype \$ARGV" }
+}
+}
Index: hwwatchbus.exp
===================================================================
--- hwwatchbus.exp (nonexistent)
+++ hwwatchbus.exp (revision 1765)
@@ -0,0 +1,83 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+ strace $tracelevel
+ }
+
+set prms_id 0
+set bug_id 0
+
+if { [skip_hp_tests] } then { continue }
+
+if { ![istarget "hppa*-*-hpux11.*"] } {
+ verbose "HPUX h/w watch test ignored for non-hppa or pre-HP/UX-10.30 targets."
+ return 0
+}
+
+set testfile "hwwatchbus"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+ return -1
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+remote_exec build "rm -f ${binfile}.bak"
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+# We ought to be able to set a hardware watchpoint, step, and
+# get a SIGBUS signal reported.
+#
+if ![runto_main] then {
+ fail "can't run to main"
+ return 0
+}
+
+send_gdb "watch bogus_p\n"
+gdb_expect {
+ -re "Hardware watchpoint \[0-9\]*: bogus_p.*$gdb_prompt $"\
+ {pass "set h/w watchpoint"}
+ -re "$gdb_prompt $"\
+ {fail "set h/w watchpoint"}
+ timeout {fail "(timeout) set h/w watchpoint"}
+}
+
+send_gdb "step\n"
+gdb_expect {
+ -re "Program received signal SIGBUS, Bus error.* in main .*${srcfile}:8.*$gdb_prompt $"\
+ {pass "see real SIGBUS when h/w watchpoint set"}
+ -re "$gdb_prompt $"\
+ {fail "see real SIGBUS when h/w watchpoint set"}
+ timeout {fail "(timeout) see real SIGBUS when h/w watchpoint set"}
+}
+
+remote_exec build "mv ${binfile} ${binfile}.bak"
+return 0
Index: sized-enum.exp
===================================================================
--- sized-enum.exp (nonexistent)
+++ sized-enum.exp (revision 1765)
@@ -0,0 +1,165 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# GDB tests for sized enumerations
+
+# This is aimed at HP-UX systems. The HP C compiler
+# allows specifying "char" or "short" for an enum, to
+# indicate that it is 1 or 2 bytes long.
+
+# This file was written by Satish Pai
+# 1997-09-24
+
+if $tracelevel then {
+ strace $tracelevel
+ }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+if { [skip_hp_tests] } then { continue }
+
+set testfile "sized-enum"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+ return -1
+}
+
+if { $gcc_compiled } then { continue }
+if {$hp_aCC_compiler} {continue}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+ perror "couldn't run to breakpoint"
+ continue
+}
+
+# set a breakpoint and go there
+send_gdb "break 34\n"
+gdb_expect {
+ -re "Breakpoint.*line 34.*$gdb_prompt $" { pass "set break 34" }
+ -re "$gdb_prompt $" { fail "set break 34" }
+ timeout { fail "(timeout) set break 34" }
+}
+send_gdb "continue\n"
+gdb_expect {
+ -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at.*sized-enum\\.c:34\r\n34.*\r\n$gdb_prompt $" { pass "continue" }
+ -re "$gdb_prompt $" { fail "continue" }
+ timeout { fail "(timeout) continue" }
+}
+
+# print stuff
+send_gdb "print normal\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \\{red, blue, green\\}.*$gdb_prompt $" { pass "print normal" }
+ -re "$gdb_prompt $" { fail "print normal" }
+ timeout { fail "(timeout) print normal" }
+}
+send_gdb "print small\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \\{pink, cyan, grey\\}.*$gdb_prompt $" { pass "print small" }
+ -re "$gdb_prompt $" { fail "print small" }
+ timeout { fail "(timeout) print small" }
+}
+send_gdb "print tiny\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = \\{orange, yellow, brown\\}.*$gdb_prompt $" { pass "print tiny" }
+ -re "$gdb_prompt $" { fail "print tiny" }
+ timeout { fail "(timeout) print tiny" }
+}
+
+# print type sizes
+send_gdb "print sizeof (Normal)\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 4.*$gdb_prompt $" { pass "print sizeof (Normal)" }
+ -re "$gdb_prompt $" { fail "print sizeof (Normal)" }
+ timeout { fail "(timeout) print sizeof (Normal)" }
+}
+send_gdb "print sizeof (Small)\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 2.*$gdb_prompt $" { pass "print sizeof (Small)" }
+ -re "$gdb_prompt $" { fail "print sizeof (Small)" }
+ timeout { fail "(timeout) print sizeof (Small)" }
+}
+send_gdb "print sizeof (Tiny)\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print sizeof (Tiny)" }
+ -re "$gdb_prompt $" { fail "print sizeof (Tiny)" }
+ timeout { fail "(timeout) print sizeof (Tiny)" }
+}
+
+# print types
+send_gdb "ptype normal\n"
+gdb_expect {
+ -re "type = enum Normal \\{red, blue, green\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype normal" }
+ -re "$gdb_prompt $" { fail "ptype normal" }
+ timeout { fail "(timeout) ptype normal" }
+}
+send_gdb "ptype small\n"
+gdb_expect {
+ -re "type = short enum Small \\{pink, cyan, grey\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype small" }
+ -re "$gdb_prompt $" { fail "ptype small" }
+ timeout { fail "(timeout) ptype small" }
+}
+send_gdb "ptype tiny\n"
+gdb_expect {
+ -re "type = char enum Tiny \\{orange, yellow, brown\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype tiny" }
+ -re "$gdb_prompt $" { fail "ptype tiny" }
+ timeout { fail "(timeout) ptype tiny" }
+}
+
+# convert to int
+send_gdb "print (int) blue\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) blue" }
+ -re "$gdb_prompt $" { fail "print (int) blue" }
+ timeout { fail "(timeout) print (int) blue" }
+}
+send_gdb "print (int) cyan\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) cyan" }
+ -re "$gdb_prompt $" { fail "print (int) cyan" }
+ timeout { fail "(timeout) print (int) cyan" }
+}
+send_gdb "print (int) yellow\n"
+gdb_expect {
+ -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) yellow" }
+ -re "$gdb_prompt $" { fail "print (int) yellow" }
+ timeout { fail "(timeout) print (int) yellow" }
+}
+
+
+
Index: reg.s
===================================================================
--- reg.s (nonexistent)
+++ reg.s (revision 1765)
@@ -0,0 +1,96 @@
+; assemble as "as -o reg reg.s"
+; or
+; cc -g -o +DA2.0N
+;
+; PA-RISC 2.0 register contents test.
+;
+ .level 2.0
+
+ .code
+ .export main,ENTRY
+ .export mainend,CODE
+ .export lab1,CODE
+ .space $TEXT$
+ .subspa $CODE$
+
+main
+ .proc
+ .callinfo NO_CALLS,FRAME=0
+ .entry
+
+ ;; Test we have right register numbers
+ ;;
+ ADD %r0,%r0,%r1 ; 0
+ LDI 1,%r1 ; 1
+ ;;
+ ;; Don't put anything into r2 or r3--they are special registers.
+ ;;
+ ADD %r1,%r1,%r4 ; 2
+ ADD %r4,%r4,%r5 ; 4
+ ADD %r5,%r5,%r6 ; 8
+ ADD %r6,%r6,%r7 ; 16
+ ADD %r7,%r7,%r8 ; 32
+ ADD %r8,%r8,%r9 ; 64
+ ADD %r9,%r9,%r10 ; 128
+ ADD %r10,%r10,%r11 ; 256
+ ADD %r11,%r11,%r12 ; 512
+ ADD %r12,%r12,%r13 ; 1024
+ ADD %r13,%r13,%r14 ; 2048
+ ADD %r14,%r14,%r15 ; 4096
+ ADD %r15,%r15,%r16 ; 9192
+
+ ;; Test high bits, to be sure we show them.
+ ;;
+ LDI 0xde,%r19 ; "de"
+ DEPD,Z %r19,55,56,%r19 ; "de00"
+ LDI 0xad,%r18 ; "ad"
+ ADD %r18,%r19,%r19 ; "dead"
+ DEPD,Z %r19,55,56,%r19 ; "dead00"
+ LDI 0xbe,%r18 ; "be"
+ ADD %r18,%r19,%r19 ; "deadbe"
+ DEPD,Z %r19,55,56,%r19 ; "deadbe00"
+ LDI 0xef,%r18 ; "ef"
+ ADD %r18,%r19,%r19 ; "deadbeef"
+ ;
+ DEPD,Z %r19,55,56,%r19 ; "deadbeef00"
+ LDI 0xba,%r18 ; "ba"
+ ADD %r18,%r19,%r19 ; "deadbeefba"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefba00"
+ LDI 0xdc,%r18 ; "dc"
+ ADD %r18,%r19,%r19 ; "deadbeefbadc"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefbadc00"
+ LDI 0xad,%r18 ; "ad"
+ ADD %r18,%r19,%r19 ; "deadbeefbadcad"
+ DEPD,Z %r19,55,56,%r19 ; "deadbeefbadcad00"
+ LDI 0xee,%r18 ; "ee"
+ ADD %r18,%r19,%r19 ; "deadbeefbadcadee"
+
+lab1 ;; Test floating point registers
+ ;;
+ LDIL LR'one,%r22 ;
+ FLDD RR'one(%r22),%fr4 ; 1.0
+ FLDD RR'one+8(%r22),%fr5 ; 2.0
+ FLDD RR'one+8(%r22),%fr6 ; 2.0
+ FMPY,DBL %fr5,%fr6,%fr7 ; 4.0
+ FMPY,DBL %fr6,%fr7,%fr8 ; 8.0
+ FMPY,DBL %fr7,%fr8,%fr9 ; 32.0
+ FMPY,DBL %fr8,%fr9,%fr10 ; 256.0
+
+ ;; The NOP prevents anything from end.o or crt0.o from
+ ;; being appended immediately after "mainend". If that
+ ;; happens, then we may have other labels that have the
+ ;; same address as "mainend", and thus the debugger
+ ;; may symbolize this PC to something other than "mainend".
+mainend
+ NOP
+ .exit
+ .procend
+
+ .space $TEXT$
+ .subspa $CODE$
+ .subspa $LIT$ ;; ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
+one
+ .align 8
+ .stringz "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00"
+ .end
+
Index: pxdb.c
===================================================================
--- pxdb.c (nonexistent)
+++ pxdb.c (revision 1765)
@@ -0,0 +1,37 @@
+#include
+
+#ifdef PROTOTYPES
+int callee (int x)
+#else
+int callee( x )
+int x;
+#endif
+{
+ int y = x * x;
+ return (y - 2);
+}
+
+int main()
+{
+ int i;
+ for (i = 1; i < 10; i++)
+ {
+ printf( "%d ", callee( i ));
+
+ }
+ printf( " Goodbye!\n" );
+ return 0;
+}
+/* This routine exists only for aCC. The way we compile this test is
+ that we use aCC for the actual compile into the object file but then
+ use ld directly for the link. When we do this, we get an undefined
+ symbol _main(). Therefore, for aCC, we have this routine in here and
+ ld is happy. */
+
+#ifdef __cplusplus
+extern "C" {
+void _main()
+{
+}
+}
+#endif