OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /or1k/trunk/gdb-5.0/gdb/testsuite/gdb.hp/gdb.compat
    from Rev 107 to Rev 1765
    Reverse comparison

Rev 107 → Rev 1765

/xdb1.c
0,0 → 1,33
void
bar (x)
int x;
{
printf ("%d\n", x);
 
long_line ();
}
 
static void
unused ()
{
/* Not used for anything */
}
 
 
/* This routine has a very long line that will break searching in older
versions of GDB. */
 
long_line ()
{
oof (67);
 
oof (6789);
 
oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 5 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 10 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 15 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 20 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 25 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 30 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 35 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 40 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 45 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 50 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 55 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 60 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 65 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (1234); /* 70 */
}
 
oof (n)
int n;
{
return n + 1;
}
/configure
0,0 → 1,899
#! /bin/sh
 
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.12.1
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
 
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
 
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
 
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
 
ac_prev=
for ac_option
do
 
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
 
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
 
# Accept the important Cygnus configure options, so we can diagnose typos.
 
case "$ac_option" in
 
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
 
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
 
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
 
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
 
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
 
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
 
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
 
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
 
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
 
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
 
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
 
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
 
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
 
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
 
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
 
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
 
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
 
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
 
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
 
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
 
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
 
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
 
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
 
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
 
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
 
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
 
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
 
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
 
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
 
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
 
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
 
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
 
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.12.1"
exit 0 ;;
 
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
 
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
 
--x)
# Obsolete; use --with-x.
with_x=yes ;;
 
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
 
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
 
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
 
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
 
esac
done
 
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
 
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
 
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
 
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
 
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
 
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=xdb1.exp
 
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
 
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
 
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
 
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
 
 
 
CC=${CC-cc}
 
ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
 
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
 
 
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
 
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:573: checking host system type" >&5
 
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
 
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
 
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:594: checking target system type" >&5
 
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
 
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
 
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:612: checking build system type" >&5
 
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
 
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
 
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
 
 
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set) 2>&1 | grep ac_space` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
 
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
 
 
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
 
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
 
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
 
ac_given_srcdir=$srcdir
 
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
 
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
 
CEOF
EOF
 
cat >> $CONFIG_STATUS <<\EOF
 
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
 
cat >> $CONFIG_STATUS <<EOF
 
CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
 
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
 
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
 
 
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
 
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
 
EOF
cat >> $CONFIG_STATUS <<EOF
 
EOF
cat >> $CONFIG_STATUS <<\EOF
 
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
configure Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: Makefile.in =================================================================== --- Makefile.in (nonexistent) +++ Makefile.in (revision 1765) @@ -0,0 +1,27 @@ +VPATH = @srcdir@ +srcdir = @srcdir@ + +EXECUTABLES = xdb xdb-test + +all: + @echo "Nothing to be done for all..." + +info: +install-info: +dvi: +install: +uninstall: force +installcheck: +check: + +clean mostlyclean: + -rm -f *~ *.o *.ci + -rm -f core $(EXECUTABLES) + +distclean maintainer-clean realclean: clean + -rm -f Makefile config.status config.log + -rm -f *-init.exp + -rm -fr *.log summary detail *.plog *.sum *.psum site.* + +Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in + $(SHELL) ./config.status --recheck Index: xdb0.h =================================================================== --- xdb0.h (nonexistent) +++ xdb0.h (revision 1765) @@ -0,0 +1,36 @@ +/* An include file that actually causes code to be generated in the + including file. This is known to cause problems on some systems. */ + +static void +foo (x) +int x; +{ + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); + bar (x++); +} Index: sum.c =================================================================== --- sum.c (nonexistent) +++ sum.c (revision 1765) @@ -0,0 +1,15 @@ +/* This is a sample program for the HP/DDE debugger. */ +#include + +#ifdef __STDC__ +int sum(int *list, int low, int high) +#else +int sum(list, low, high) +int *list, low, high; +#endif + { + int i = 0, s = 0; + for (i = low; i <= high; i++) + s += list[i]; + return(s); + } Index: configure.in =================================================================== --- configure.in (nonexistent) +++ configure.in (revision 1765) @@ -0,0 +1,15 @@ +dnl Process this file file with autoconf to produce a configure script. +dnl This file is a shell script fragment that supplies the information +dnl necessary to tailor a template configure script into the configure +dnl script appropriate for this directory. For more information, check +dnl any existing configure script. + +AC_PREREQ(2.5) +AC_INIT(xdb1.exp) + +CC=${CC-cc} +AC_SUBST(CC) +AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../../..) +AC_CANONICAL_SYSTEM + +AC_OUTPUT(Makefile) Index: xdb1.exp =================================================================== --- xdb1.exp (nonexistent) +++ xdb1.exp (revision 1765) @@ -0,0 +1,78 @@ +# Copyright (C) 1992, 1994, 1995 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Fred Fish. (fnf@cygnus.com) + +if $tracelevel then { + strace $tracelevel + } + +if { [skip_hp_tests] } then { continue } + +global usestubs + +# +# test running programs +# +set prms_id 0 +set bug_id 0 + +set testfile "xdb" +set srcfile ${testfile}.c +set binfile ${objdir}/${subdir}/${testfile} +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +if [get_compiler_info ${binfile}] { + return -1; +} +if { $gcc_compiled } then { continue } + +global GDBFLAGS +set saved_gdbflags $GDBFLAGS + +set GDBFLAGS "$GDBFLAGS --xdb" + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +gdb_test "set pagination off" "" +gdb_test "show pagination" "State of pagination is off." +gdb_test "set pagination on" "" +gdb_test "show pagination" "State of pagination is on." + +gdb_test "txbreak callee" "Breakpoint.*at.*" +gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*del.*y.*" + +gdb_test "xbreak callee" "Breakpoint.*at.*.*" +gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*keep.*y.*" + +gdb_exit +set GDBFLAGS $saved_gdbflags +return 0 + + + + + + + Index: xdb2.exp =================================================================== --- xdb2.exp (nonexistent) +++ xdb2.exp (revision 1765) @@ -0,0 +1,105 @@ +# Copyright (C) 1992, 1994, 1995 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Fred Fish. (fnf@cygnus.com) + +if $tracelevel then { + strace $tracelevel + } + +if { [skip_hp_tests] } then { continue } + +global message + +# +# test running programs +# +set prms_id 0 +set bug_id 0 + +set testfile "xdb" +set binfile ${objdir}/${subdir}/${testfile} + +if { [gdb_compile "${srcdir}/${subdir}/xdb0.c" "${binfile}0.o" object {debug}] != "" } { + perror "Couldn't compile ${testfile}0.c to object" + return -1 +} + +if { [gdb_compile "${srcdir}/${subdir}/xdb1.c" "${binfile}1.o" object {debug}] != "" } { + perror "Couldn't compile ${testfile}1.c to object" + return -1 +} + +if { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } { + perror "Couldn't link ${testfile}." + return -1 +} + +if [get_compiler_info ${binfile}] { + return -1; +} + +if { $gcc_compiled } then { continue } + +global GDBFLAGS +set saved_gdbflags $GDBFLAGS +set GDBFLAGS "$GDBFLAGS --xdb" + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} +gdb_test "break main" "" +gdb_test "run" "" +gdb_test "go +2" "Breakpoint.*at.*file.*xdb0\.c, line 12\.\r\nContinuing at.*\r\nmain \\(\\) at.*xdb0\.c:12\r\n12\[ \t\]+foo \\(x\\+\\+\\);" +gdb_test "go -2" "Note: breakpoint.*also set at pc.*\.\r\nBreakpoint.*at.*file.*xdb0\.c, line 10\.\r\nContinuing at.*\.\r\n\r\nBreakpoint.*, main \\(\\) at.*xdb0\.c:10.*" +gdb_test "go 16" "Breakpoint.*at.*file.*xdb0\.c, line 16\.\r\nContinuing at.*\.\r\nmain \\(\\) at.*xdb0\.c:16\r\n16\[ \t\]+foo \\(x\\+\\+\\);" + +send_gdb "go bar\n" + gdb_expect { + -re ".*Line 5 is not in .main.. Jump anyway.*y or n. $" { + send_gdb "y\n" + gdb_expect { + -re "$gdb_prompt $"\ + {pass "go bar"} + timeout {fail "(timeout) go bar"} + } + } + -re "Continuing at.*\.\r\nbar \\(x=0\\) at.*xdb1\.c:5" {} + timeout { perror "(timeout) go bar" ; return } + } + +# Verify that GDB responds gracefully to a "go" command without +# an argument. +# +gdb_test "go" "Usage: go " + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +gdb_test "break bar" "" +gdb_test "run" "" +gdb_test "backtrace full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n.2.* in main \\(\\) at.*xdb0\.c:11\r\n.*x = 1" +gdb_test "bt 1 full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)" +gdb_test "bt full 2" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)" + +set GDBFLAGS $saved_gdbflags +return 0 Index: xdb3.exp =================================================================== --- xdb3.exp (nonexistent) +++ xdb3.exp (revision 1765) @@ -0,0 +1,321 @@ +# Copyright (C) 1998 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + + +if $tracelevel then { + strace $tracelevel +} + +if { [skip_hp_tests] } then { continue } + +set testfile1 "average" +set testfile2 "sum" +set testfile "xdb-test" +set binfile1 ${objdir}/${subdir}/${testfile1} +set binfile2 ${objdir}/${subdir}/${testfile2} +set binfile ${objdir}/${subdir}/${testfile} + +if { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +if { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +if { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +if [get_compiler_info ${binfile}] { + return -1; +} +if { $gcc_compiled } then { continue } + + +proc xdb_reinitialize_dir { subdir } { + global gdb_prompt + + send_gdb "D\n" + gdb_expect { + -re "Reinitialize source path to empty.*y or n. " { + send_gdb "y\n" + gdb_expect { + -re "Source directories searched.*$gdb_prompt $" { + send_gdb "D $subdir\n" + gdb_expect { + -re "Source directories searched.*$gdb_prompt $" { + verbose "Dir set to $subdir" + } + -re ".*$gdb_prompt $" { + perror "Dir \"$subdir\" failed." + } + } + } + -re ".*$gdb_prompt $" { + perror "Dir \"$subdir\" failed." + } + } + } + -re ".*$gdb_prompt $" { + perror "Dir \"$subdir\" failed." + } + } +} + +# +#test_search +# +proc test_search { } { + gdb_test "set listsize 4" "" + gdb_test "list average.c:1" "1\[ \t\]+/. This is a sample .*" + gdb_test "/ print_average" "17\[ \t\]+void print_average\\(int \\*list.*" + gdb_test "/ print_average" "19\[ \t\]+void print_average\\(list, low, high\\)" + gdb_test "/ print_average" "42\[ \t\]+print_average \\(my_list, first, last\\);" + gdb_test "? print_average" "19\[ \t\]+void print_average\\(list, low, high\\)" + gdb_test "? sum" "9\[ \t]+extern int sum\\(\\);" +} + +# +#test_viewing_loc +# +proc test_viewing_loc { } { + gdb_test "L" "No stack." + gdb_test "break main" "" + gdb_test "R" "" + gdb_test "L" "#0\[ \t\]+main \\(\\) at.*average.c:38\r\n38\[ \t\]+int first = 0, last = 0;" +} + +# +#test_dir_list +# +proc test_dir_list { } { + gdb_test "ld" "Source directories searched: .*" +} + +# +#test_list_sources +# +proc test_list_sources { } { + if [istarget "hppa2.0w-*-*"] { + gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*Source files for which symbols will be read in on demand:\r\n\r\nglobals,.*\[se\]\[un\]\[md\]\\.c.*\[se\]\[un\]\[md\]\\.c" + } else { + gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*\r\n\r\nSource files for which symbols will be read in on demand:\r\n\r\nglobals, end\\.c,.*sum\\.c" + } +} +# +#test_vlist +# +proc test_vlist { } { + gdb_test "v main" "34\[ \t\]+main \\(\\)\r\n35\[ \t\]+#endif\r\n36\[ \t\]+.\r\n37\[ \t\]+char c;" +} + +# +#test_va +# +proc test_va { } { + if [istarget "hppa2.0w-*-*"] { + gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+std %rp,-0x10\\(%sp\\)\r\n0x.* :\[ \t\]+std,ma %r3,0xd0\\(%sp\\)\r\n.*0x.* :\[ \t\]+std %r4,-0xc8\\(%sp\\)\r\n.*0x.* :\[ \t\]+copy %ret1,%r3\r\n.*" + } else { + gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+stw %rp,-0x14\\(%sr0,%sp\\)\r\n0x.* :\[ \t\]+ldo 0x\[48\]0\\(%sp\\),%sp\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*" + } +} + +# +#test_list_globals +# +proc test_list_globals { } { + gdb_test "lg" "All defined variables:\r\n\r\nFile globals:.*" +# gdb_test "lg" "All defined variables:\r\n\r\nFile globals:\r\nchar __buffer.512.;\r\nint __d_eh_catch_catch;\r\nint __d_eh_catch_throw;.*" +} + +# +#test_list_registers +# +proc test_list_registers { } { + if [istarget "hppa2.0w-*-*"] { + gdb_test "lr" "\[ \t\]+flags:.*r17:.*pcsqh:.*cr0:.*\r\n\[ \t\]+r1:.*r18:.*pcoqt:.*cr8:.*" + } else { + gdb_test "lr" "\[ \t\]+flags:.*r18:.*pcsqt:.*ccr:.*\r\n\[ \t\]+r1:.*r19:.*eiem:.*cr12:.*" + } + gdb_test "lr r1" "r1 .*" +} + +# +#test_backtrace +# +proc test_backtrace { } { + gdb_test "t" "#0 main \\(\\) at.*average.c:39" + gdb_test "T" "#0 main \\(\\) at.*average.c:39\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 0" + + gdb_test "break sum" "" + gdb_test "cont" "" + gdb_test "next" + + gdb_test "t" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n#2 0x.* in main \\(\\) at.*average\.c:42" + gdb_test "t 1" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\(More stack frames follow\.\.\.\\)" + gdb_test "T" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n\[ \t\]+total = 0\r\n\[ \t\]+num_elements = 0\r\n\[ \t\]+average = 0\r\n#2 0x.* in main \\(\\) at.*average\.c:42\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 9" + gdb_test "T 1" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n\\(More stack frames follow\.\.\.\\)" + + gdb_test "V" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\12\[ \t\]+for \\(i = low;.*\\)" + gdb_test "V 1" "#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n24\[ \t\]+total = sum\\(list, low, high\\);" +} + +# +# test_go +# +proc test_go { } { + gdb_test "break main" "" + gdb_test "R" "" + + gdb_test "g +1" "Breakpoint.*at 0x.*: file.*average\.c, line 39\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:39\r\n39\[ \t\]+last = num-1;" + gdb_test "g 42" "Breakpoint.*at 0x.*: file.*average\.c, line 42\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:42\r\n42\[ \t\]+print_average \\(my_list, first, last\\);" + +} + +# +#test_breakpoints +# +proc test_breakpoints { } { + global gdb_prompt + + gdb_test "sb" "" + gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep n.*in main at.*average\.c:38.*" + gdb_test "ab" "" + gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38.*" + gdb_test "ba sum" "Breakpoint.*at.*: file.*sum\.c, line 11\." + gdb_test "cont" "" + gdb_test "bx" "Breakpoint.*at.*: file.*sum.c, line 15\." + #gdb_test "bx if (1)" "Breakpoint.*at.*: file.*sum.c, line 15\." + gdb_test "bx 1" "Breakpoint.*at.*: file.*average.c, line 29\." + gdb_test "bx 1 if (1)" "Breakpoint.*at.*: file.*average.c, line 29\." + gdb_test "bc 1 2" "Will ignore next 2 crossings of breakpoint 1\." + gdb_test "lb 1" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38\r\n.*breakpoint already hit 1 time\r\n.*ignore next 2 hits.*" + + send_gdb "db\n" + gdb_expect { + -re "Delete all breakpoints.*y or n. $" { + send_gdb "y\n" + exp_continue + } + -re "y\r\n$gdb_prompt $" {} + -re ".*$gdb_prompt $" { # This happens if there were no breakpoints + } + timeout { perror "Delete all breakpoints (timeout)" ; return } + } + send_gdb "lb\n" + gdb_expect { + -re "No breakpoints or watchpoints..*$gdb_prompt $" {} + -re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return } + timeout { perror "info breakpoints (timeout)" ; return } + } +gdb_test "xbreak" "Breakpoint.*at.*file.*sum.c, line 15." +gdb_test "xbreak print_average" "Breakpoint.*at.*file.*average.c, line 29." +gdb_test "xbreak if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*sum.c, line 15." +gdb_test "xbreak print_average if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*average.c, line 29." + + send_gdb "lb\n" + gdb_expect { + -re "Num Type Disp Enb Address What.*breakpoint keep y.*sum.c:15.*breakpoint keep y.*average.c:29.*breakpoint keep y.*sum.c:15.*stop only if 1.*breakpoint keep y.*average.c:29.*stop only if 1.*$gdb_prompt $" {pass "lb on xbreaks"} + -re ".*$gdb_prompt $" { fail "breakpoints not deleted"} + timeout { fail "info breakpoints (timeout)" } + } + +} + +# +# test_signals +# +proc test_signals { } { + gdb_test "handle SIGTERM nostop noprint" "" + gdb_test "z 15 s" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*Yes.*Yes.*Yes.*Terminated" + gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*Yes.*Terminated" + gdb_test "z 15 i" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated" + gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*Yes.*No.*Terminated" + gdb_test "z 15 Q" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated" + gdb_test "lz" "Signal.*Stop.*Print.*Pass to program.*Description\r\n\r\nSIGHUP.*Yes.*" +} + + + +# Start with a fresh gdb. +global GDBFLAGS +set saved_gdbflags $GDBFLAGS + +set GDBFLAGS "$GDBFLAGS --xdb" + +gdb_exit +gdb_start + +xdb_reinitialize_dir $srcdir/$subdir + +gdb_load ${binfile} +send_gdb "set width 0\n" +gdb_expect -re "$gdb_prompt $" +test_search +test_viewing_loc +test_dir_list +test_list_sources +test_vlist +test_va +gdb_test "next" +gdb_test "l" "No arguments.\r\nc = *.*\r\nfirst = 0\r\nlast = 0" +#test_list_globals +test_list_registers +test_backtrace + +# Start with a fresh gdb. + +gdb_exit +gdb_start +xdb_reinitialize_dir $srcdir/$subdir + +gdb_load ${binfile} +send_gdb "set width 0\n" +gdb_expect -re "$gdb_prompt $" +test_go + + +gdb_exit +gdb_start +xdb_reinitialize_dir $srcdir/$subdir + +gdb_load ${binfile} +send_gdb "set width 0\n" +gdb_expect -re "$gdb_prompt $" +gdb_test "break main" "" +gdb_test "R" "" +gdb_test "S" "39\[ \t\]+last = num-1;" +test_breakpoints +test_signals +gdb_test "sm" "" +gdb_test "info set" ".*pagination: State of pagination is off.*" +gdb_test "am" "" +gdb_test "info set" ".*pagination: State of pagination is on.*" +gdb_exit + +set GDBFLAGS $saved_gdbflags + +return 0 + + + + + + Index: average.c =================================================================== --- average.c (nonexistent) +++ average.c (revision 1765) @@ -0,0 +1,46 @@ +/* This is a sample program for the HP WDB debugger. */ + +#include +#include + +#ifdef PROTOTYPES +extern int sum(int *, int, int); +#else +extern int sum(); +#endif + +#define num 10 + +static int my_list[num] = {3,4,2,0,2,1,8,3,6,7}; + +#ifdef __STDC__ +void print_average(int *list, int low, int high) +#else +void print_average(list, low, high) +int *list, low, high; +#endif + { + int total = 0, num_elements = 0, average = 0; + total = sum(list, low, high); + num_elements = high - low; /* note this is an off-by-one bug */ + + average = total / num_elements; + printf("%10.d\n", average); + } + +#ifdef __STDC__ +int main(void) +#else +main () +#endif +{ + char c; + int first = 0, last = 0; + last = num-1; + + /* Try two test cases. */ + print_average (my_list, first, last); + print_average (my_list, first, last - 3); + + exit(0); +} Index: xdb.c =================================================================== --- xdb.c (nonexistent) +++ xdb.c (revision 1765) @@ -0,0 +1,20 @@ +#include + +int callee( x ) +int x; +{ + int y = x * x; + return (y - 2); +} + +main() +{ + int i; + for (i = 1; i < 10; i++) + { + printf( "%d ", callee( i )); + + } + printf( " Goodbye!\n" ); + +} Index: xdb0.c =================================================================== --- xdb0.c (nonexistent) +++ xdb0.c (revision 1765) @@ -0,0 +1,42 @@ +#include "xdb0.h" + +main () +{ + int x; +#ifdef usestubs + set_debug_traps(); + breakpoint(); +#endif + x = 0; + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); + foo (x++); +} + +static void +unused () +{ + /* Not used for anything */ +}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.