URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/gdb-5.0/gdb/testsuite/gdb.hp/gdb.threads-hp
- from Rev 107 to Rev 1765
- ↔ Reverse comparison
Rev 107 → Rev 1765
/usrthcore.c
0,0 → 1,177
#include <stdio.h> |
|
/* #include "config.h" */ |
#define HAVE_PTHREAD_H |
#define __hpux__ |
#define __osf__ |
|
#ifndef HAVE_PTHREAD_H |
|
/* Don't even try to compile. In fact, cause a syntax error that we can |
look for as a compiler error message and know that we have no pthread |
support. In that case we can just suppress the test completely. */ |
|
#error "no posix threads support" |
|
#else |
|
/* OK. We have the right header. If we try to compile this and fail, then |
there is something wrong and the user should know about it so the testsuite |
should issue an ERROR result.. */ |
|
#ifdef __linux__ |
#define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */ |
#endif |
|
#include <pthread.h> |
|
/* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create |
is prototyped to be just a "pthread_attr_t", while under Solaris it |
is a "pthread_attr_t *". Arg! */ |
|
#if defined (__osf__) || defined (__hpux__) |
#define PTHREAD_CREATE_ARG2(arg) arg |
#define PTHREAD_CREATE_NULL_ARG2 null_attr |
static pthread_attr_t null_attr; |
#else |
#define PTHREAD_CREATE_ARG2(arg) &arg |
#define PTHREAD_CREATE_NULL_ARG2 NULL |
#endif |
|
static int verbose = 0; |
|
static void |
common_routine (arg) |
int arg; |
{ |
static int from_thread1; |
static int from_thread2; |
static int from_main; |
static int hits; |
static int full_coverage; |
|
if (verbose) printf("common_routine (%d)\n", arg); |
hits++; |
switch (arg) |
{ |
case 0: |
from_main++; |
break; |
case 1: |
from_thread1++; |
break; |
case 2: |
from_thread2++; |
break; |
} |
if (from_main && from_thread1 && from_thread2) |
full_coverage = 1; |
} |
|
static void * |
thread1 (void *arg) |
{ |
int i; |
int z = 0; |
|
if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ()); |
for (i=1; i <= 10000000; i++) |
{ |
if (verbose) printf("thread1 %d\n", pthread_self ()); |
z += i; |
common_routine (1); |
sleep(1); |
} |
} |
|
static void * |
thread2 (void * arg) |
{ |
int i; |
int k = 0; |
|
if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ()); |
for (i=1; i <= 10000000; i++) |
{ |
if (verbose) printf("thread2 %d\n", pthread_self ()); |
k += i; |
common_routine (2); |
sleep(1); |
} |
sleep(100); |
} |
|
int |
foo (a, b, c) |
int a, b, c; |
{ |
int d, e, f; |
|
if (verbose) printf("a=%d\n", a); |
} |
|
main(argc, argv) |
int argc; |
char **argv; |
{ |
pthread_t tid1, tid2; |
int j; |
int t = 0; |
void (*xxx) (); |
pthread_attr_t attr; |
|
if (verbose) printf ("pid = %d\n", getpid()); |
|
foo (1, 2, 3); |
|
#ifndef __osf__ |
if (pthread_attr_init (&attr)) |
{ |
perror ("pthread_attr_init 1"); |
exit (1); |
} |
#endif |
|
#ifdef PTHREAD_SCOPE_SYSTEM |
if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM)) |
{ |
perror ("pthread_attr_setscope 1"); |
exit (1); |
} |
#endif |
|
if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface)) |
{ |
perror ("pthread_create 1"); |
exit (1); |
} |
if (verbose) printf ("Made thread %d\n", tid1); |
sleep (1); |
|
if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef)) |
{ |
perror ("pthread_create 2"); |
exit (1); |
} |
if (verbose) printf("Made thread %d\n", tid2); |
|
sleep (1); |
|
for (j = 1; j <= 10000000; j++) |
{ |
if (verbose) printf("top %d\n", pthread_self ()); |
common_routine (0); |
sleep(1); |
t += j; |
if (j > 3) |
{ |
int* int_p; |
int_p = 0; |
*int_p = 1; |
} |
} |
|
exit(0); |
} |
|
#endif /* ifndef HAVE_PTHREAD_H */ |
/configure
0,0 → 1,899
#! /bin/sh |
|
# Guess values for system-dependent variables and create Makefiles. |
# Generated automatically using autoconf version 2.12.1 |
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. |
# |
# This configure script is free software; the Free Software Foundation |
# gives unlimited permission to copy, distribute and modify it. |
|
# Defaults: |
ac_help= |
ac_default_prefix=/usr/local |
# Any additions from configure.in: |
|
# Initialize some variables set by options. |
# The variables have the same names as the options, with |
# dashes changed to underlines. |
build=NONE |
cache_file=./config.cache |
exec_prefix=NONE |
host=NONE |
no_create= |
nonopt=NONE |
no_recursion= |
prefix=NONE |
program_prefix=NONE |
program_suffix=NONE |
program_transform_name=s,x,x, |
silent= |
site= |
srcdir= |
target=NONE |
verbose= |
x_includes=NONE |
x_libraries=NONE |
bindir='${exec_prefix}/bin' |
sbindir='${exec_prefix}/sbin' |
libexecdir='${exec_prefix}/libexec' |
datadir='${prefix}/share' |
sysconfdir='${prefix}/etc' |
sharedstatedir='${prefix}/com' |
localstatedir='${prefix}/var' |
libdir='${exec_prefix}/lib' |
includedir='${prefix}/include' |
oldincludedir='/usr/include' |
infodir='${prefix}/info' |
mandir='${prefix}/man' |
|
# Initialize some other variables. |
subdirs= |
MFLAGS= MAKEFLAGS= |
SHELL=${CONFIG_SHELL-/bin/sh} |
# Maximum number of lines to put in a shell here document. |
ac_max_here_lines=12 |
|
ac_prev= |
for ac_option |
do |
|
# If the previous option needs an argument, assign it. |
if test -n "$ac_prev"; then |
eval "$ac_prev=\$ac_option" |
ac_prev= |
continue |
fi |
|
case "$ac_option" in |
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; |
*) ac_optarg= ;; |
esac |
|
# Accept the important Cygnus configure options, so we can diagnose typos. |
|
case "$ac_option" in |
|
-bindir | --bindir | --bindi | --bind | --bin | --bi) |
ac_prev=bindir ;; |
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
bindir="$ac_optarg" ;; |
|
-build | --build | --buil | --bui | --bu) |
ac_prev=build ;; |
-build=* | --build=* | --buil=* | --bui=* | --bu=*) |
build="$ac_optarg" ;; |
|
-cache-file | --cache-file | --cache-fil | --cache-fi \ |
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
ac_prev=cache_file ;; |
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
cache_file="$ac_optarg" ;; |
|
-datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
ac_prev=datadir ;; |
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| --da=*) |
datadir="$ac_optarg" ;; |
|
-disable-* | --disable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
eval "enable_${ac_feature}=no" ;; |
|
-enable-* | --enable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "enable_${ac_feature}='$ac_optarg'" ;; |
|
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| --exec | --exe | --ex) |
ac_prev=exec_prefix ;; |
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| --exec=* | --exe=* | --ex=*) |
exec_prefix="$ac_optarg" ;; |
|
-gas | --gas | --ga | --g) |
# Obsolete; use --with-gas. |
with_gas=yes ;; |
|
-help | --help | --hel | --he) |
# Omit some internal or obsolete options to make the list less imposing. |
# This message is too long to be a string in the A/UX 3.1 sh. |
cat << EOF |
Usage: configure [options] [host] |
Options: [defaults in brackets after descriptions] |
Configuration: |
--cache-file=FILE cache test results in FILE |
--help print this message |
--no-create do not create output files |
--quiet, --silent do not print \`checking...' messages |
--version print the version of autoconf that created configure |
Directory and file names: |
--prefix=PREFIX install architecture-independent files in PREFIX |
[$ac_default_prefix] |
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
[same as prefix] |
--bindir=DIR user executables in DIR [EPREFIX/bin] |
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin] |
--libexecdir=DIR program executables in DIR [EPREFIX/libexec] |
--datadir=DIR read-only architecture-independent data in DIR |
[PREFIX/share] |
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] |
--sharedstatedir=DIR modifiable architecture-independent data in DIR |
[PREFIX/com] |
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] |
--libdir=DIR object code libraries in DIR [EPREFIX/lib] |
--includedir=DIR C header files in DIR [PREFIX/include] |
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] |
--infodir=DIR info documentation in DIR [PREFIX/info] |
--mandir=DIR man documentation in DIR [PREFIX/man] |
--srcdir=DIR find the sources in DIR [configure dir or ..] |
--program-prefix=PREFIX prepend PREFIX to installed program names |
--program-suffix=SUFFIX append SUFFIX to installed program names |
--program-transform-name=PROGRAM |
run sed PROGRAM on installed program names |
EOF |
cat << EOF |
Host type: |
--build=BUILD configure for building on BUILD [BUILD=HOST] |
--host=HOST configure for HOST [guessed] |
--target=TARGET configure for TARGET [TARGET=HOST] |
Features and packages: |
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
--enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes] |
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) |
--x-includes=DIR X include files are in DIR |
--x-libraries=DIR X library files are in DIR |
EOF |
if test -n "$ac_help"; then |
echo "--enable and --with options recognized:$ac_help" |
fi |
exit 0 ;; |
|
-host | --host | --hos | --ho) |
ac_prev=host ;; |
-host=* | --host=* | --hos=* | --ho=*) |
host="$ac_optarg" ;; |
|
-includedir | --includedir | --includedi | --included | --include \ |
| --includ | --inclu | --incl | --inc) |
ac_prev=includedir ;; |
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| --includ=* | --inclu=* | --incl=* | --inc=*) |
includedir="$ac_optarg" ;; |
|
-infodir | --infodir | --infodi | --infod | --info | --inf) |
ac_prev=infodir ;; |
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
infodir="$ac_optarg" ;; |
|
-libdir | --libdir | --libdi | --libd) |
ac_prev=libdir ;; |
-libdir=* | --libdir=* | --libdi=* | --libd=*) |
libdir="$ac_optarg" ;; |
|
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| --libexe | --libex | --libe) |
ac_prev=libexecdir ;; |
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| --libexe=* | --libex=* | --libe=*) |
libexecdir="$ac_optarg" ;; |
|
-localstatedir | --localstatedir | --localstatedi | --localstated \ |
| --localstate | --localstat | --localsta | --localst \ |
| --locals | --local | --loca | --loc | --lo) |
ac_prev=localstatedir ;; |
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
localstatedir="$ac_optarg" ;; |
|
-mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
ac_prev=mandir ;; |
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
mandir="$ac_optarg" ;; |
|
-nfp | --nfp | --nf) |
# Obsolete; use --without-fp. |
with_fp=no ;; |
|
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) |
no_create=yes ;; |
|
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
no_recursion=yes ;; |
|
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| --oldin | --oldi | --old | --ol | --o) |
ac_prev=oldincludedir ;; |
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
oldincludedir="$ac_optarg" ;; |
|
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
ac_prev=prefix ;; |
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
prefix="$ac_optarg" ;; |
|
-program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| --program-pre | --program-pr | --program-p) |
ac_prev=program_prefix ;; |
-program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
program_prefix="$ac_optarg" ;; |
|
-program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| --program-suf | --program-su | --program-s) |
ac_prev=program_suffix ;; |
-program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
program_suffix="$ac_optarg" ;; |
|
-program-transform-name | --program-transform-name \ |
| --program-transform-nam | --program-transform-na \ |
| --program-transform-n | --program-transform- \ |
| --program-transform | --program-transfor \ |
| --program-transfo | --program-transf \ |
| --program-trans | --program-tran \ |
| --progr-tra | --program-tr | --program-t) |
ac_prev=program_transform_name ;; |
-program-transform-name=* | --program-transform-name=* \ |
| --program-transform-nam=* | --program-transform-na=* \ |
| --program-transform-n=* | --program-transform-=* \ |
| --program-transform=* | --program-transfor=* \ |
| --program-transfo=* | --program-transf=* \ |
| --program-trans=* | --program-tran=* \ |
| --progr-tra=* | --program-tr=* | --program-t=*) |
program_transform_name="$ac_optarg" ;; |
|
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
silent=yes ;; |
|
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
ac_prev=sbindir ;; |
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| --sbi=* | --sb=*) |
sbindir="$ac_optarg" ;; |
|
-sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| --sharedst | --shareds | --shared | --share | --shar \ |
| --sha | --sh) |
ac_prev=sharedstatedir ;; |
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| --sha=* | --sh=*) |
sharedstatedir="$ac_optarg" ;; |
|
-site | --site | --sit) |
ac_prev=site ;; |
-site=* | --site=* | --sit=*) |
site="$ac_optarg" ;; |
|
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
ac_prev=srcdir ;; |
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
srcdir="$ac_optarg" ;; |
|
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| --syscon | --sysco | --sysc | --sys | --sy) |
ac_prev=sysconfdir ;; |
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
sysconfdir="$ac_optarg" ;; |
|
-target | --target | --targe | --targ | --tar | --ta | --t) |
ac_prev=target ;; |
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
target="$ac_optarg" ;; |
|
-v | -verbose | --verbose | --verbos | --verbo | --verb) |
verbose=yes ;; |
|
-version | --version | --versio | --versi | --vers) |
echo "configure generated by autoconf version 2.12.1" |
exit 0 ;; |
|
-with-* | --with-*) |
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "with_${ac_package}='$ac_optarg'" ;; |
|
-without-* | --without-*) |
ac_package=`echo $ac_option|sed -e 's/-*without-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
eval "with_${ac_package}=no" ;; |
|
--x) |
# Obsolete; use --with-x. |
with_x=yes ;; |
|
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| --x-incl | --x-inc | --x-in | --x-i) |
ac_prev=x_includes ;; |
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
x_includes="$ac_optarg" ;; |
|
-x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
ac_prev=x_libraries ;; |
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
x_libraries="$ac_optarg" ;; |
|
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } |
;; |
|
*) |
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then |
echo "configure: warning: $ac_option: invalid host type" 1>&2 |
fi |
if test "x$nonopt" != xNONE; then |
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } |
fi |
nonopt="$ac_option" |
;; |
|
esac |
done |
|
if test -n "$ac_prev"; then |
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } |
fi |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
# File descriptor usage: |
# 0 standard input |
# 1 file creation |
# 2 errors and warnings |
# 3 some systems may open it to /dev/tty |
# 4 used on the Kubota Titan |
# 6 checking for... messages and results |
# 5 compiler messages saved in config.log |
if test "$silent" = yes; then |
exec 6>/dev/null |
else |
exec 6>&1 |
fi |
exec 5>./config.log |
|
echo "\ |
This file contains any messages produced by compilers while |
running configure, to aid debugging if configure makes a mistake. |
" 1>&5 |
|
# Strip out --no-create and --no-recursion so they do not pile up. |
# Also quote any args containing shell metacharacters. |
ac_configure_args= |
for ac_arg |
do |
case "$ac_arg" in |
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) ;; |
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; |
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) |
ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
*) ac_configure_args="$ac_configure_args $ac_arg" ;; |
esac |
done |
|
# NLS nuisances. |
# Only set these to C if already set. These must not be set unconditionally |
# because not all systems understand e.g. LANG=C (notably SCO). |
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! |
# Non-C LC_CTYPE values break the ctype check. |
if test "${LANG+set}" = set; then LANG=C; export LANG; fi |
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi |
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi |
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi |
|
# confdefs.h avoids OS command line length limits that DEFS can exceed. |
rm -rf conftest* confdefs.h |
# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
echo > confdefs.h |
|
# A filename unique to this package, relative to the directory that |
# configure is in, which we can look for to find out if srcdir is correct. |
ac_unique_file=usrthbasic.exp |
|
# Find the source files, if location was not specified. |
if test -z "$srcdir"; then |
ac_srcdir_defaulted=yes |
# Try the directory containing this script, then its parent. |
ac_prog=$0 |
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` |
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. |
srcdir=$ac_confdir |
if test ! -r $srcdir/$ac_unique_file; then |
srcdir=.. |
fi |
else |
ac_srcdir_defaulted=no |
fi |
if test ! -r $srcdir/$ac_unique_file; then |
if test "$ac_srcdir_defaulted" = yes; then |
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } |
else |
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } |
fi |
fi |
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` |
|
# Prefer explicitly selected file to automatically selected ones. |
if test -z "$CONFIG_SITE"; then |
if test "x$prefix" != xNONE; then |
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
else |
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
fi |
fi |
for ac_site_file in $CONFIG_SITE; do |
if test -r "$ac_site_file"; then |
echo "loading site script $ac_site_file" |
. "$ac_site_file" |
fi |
done |
|
if test -r "$cache_file"; then |
echo "loading cache $cache_file" |
. $cache_file |
else |
echo "creating cache $cache_file" |
> $cache_file |
fi |
|
ac_ext=c |
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' |
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' |
cross_compiling=$ac_cv_prog_cc_cross |
|
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then |
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. |
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then |
ac_n= ac_c=' |
' ac_t=' ' |
else |
ac_n=-n ac_c= ac_t= |
fi |
else |
ac_n= ac_c='\c' ac_t= |
fi |
|
|
|
CC=${CC-cc} |
|
ac_aux_dir= |
for ac_dir in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../..; do |
if test -f $ac_dir/install-sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f $ac_dir/install.sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../.." 1>&2; exit 1; } |
fi |
ac_config_guess=$ac_aux_dir/config.guess |
ac_config_sub=$ac_aux_dir/config.sub |
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. |
|
|
# Do some error checking and defaulting for the host and target type. |
# The inputs are: |
# configure --host=HOST --target=TARGET --build=BUILD NONOPT |
# |
# The rules are: |
# 1. You are not allowed to specify --host, --target, and nonopt at the |
# same time. |
# 2. Host defaults to nonopt. |
# 3. If nonopt is not specified, then host defaults to the current host, |
# as determined by config.guess. |
# 4. Target and build default to nonopt. |
# 5. If nonopt is not specified, then target and build default to host. |
|
# The aliases save the names the user supplied, while $host etc. |
# will get canonicalized. |
case $host---$target---$nonopt in |
NONE---*---* | *---NONE---* | *---*---NONE) ;; |
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; |
esac |
|
|
# Make sure we can run config.sub. |
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : |
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } |
fi |
|
echo $ac_n "checking host system type""... $ac_c" 1>&6 |
echo "configure:573: checking host system type" >&5 |
|
host_alias=$host |
case "$host_alias" in |
NONE) |
case $nonopt in |
NONE) |
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : |
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } |
fi ;; |
*) host_alias=$nonopt ;; |
esac ;; |
esac |
|
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` |
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$host" 1>&6 |
|
echo $ac_n "checking target system type""... $ac_c" 1>&6 |
echo "configure:594: checking target system type" >&5 |
|
target_alias=$target |
case "$target_alias" in |
NONE) |
case $nonopt in |
NONE) target_alias=$host_alias ;; |
*) target_alias=$nonopt ;; |
esac ;; |
esac |
|
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` |
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$target" 1>&6 |
|
echo $ac_n "checking build system type""... $ac_c" 1>&6 |
echo "configure:612: checking build system type" >&5 |
|
build_alias=$build |
case "$build_alias" in |
NONE) |
case $nonopt in |
NONE) build_alias=$host_alias ;; |
*) build_alias=$nonopt ;; |
esac ;; |
esac |
|
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` |
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
echo "$ac_t""$build" 1>&6 |
|
test "$host_alias" != "$target_alias" && |
test "$program_prefix$program_suffix$program_transform_name" = \ |
NONENONEs,x,x, && |
program_prefix=${target_alias}- |
|
|
trap '' 1 2 15 |
cat > confcache <<\EOF |
# This file is a shell script that caches the results of configure |
# tests run on this system so they can be shared between configure |
# scripts and configure runs. It is not useful on other systems. |
# If it contains results you don't want to keep, you may remove or edit it. |
# |
# By default, configure uses ./config.cache as the cache file, |
# creating it if it does not exist already. You can give configure |
# the --cache-file=FILE option to use a different cache file; that is |
# what configure does when it calls configure scripts in |
# subdirectories, so they share the cache. |
# Giving --cache-file=/dev/null disables caching, for debugging configure. |
# config.status only pays attention to the cache file if you give it the |
# --recheck option to rerun configure. |
# |
EOF |
# The following way of writing the cache mishandles newlines in values, |
# but we know of no workaround that is simple, portable, and efficient. |
# So, don't put newlines in cache variables' values. |
# Ultrix sh set writes to stderr and can't be redirected directly, |
# and sets the high bit in the cache file unless we assign to the vars. |
(set) 2>&1 | |
case `(ac_space=' '; set) 2>&1 | grep ac_space` in |
*ac_space=\ *) |
# `set' does not quote correctly, so add quotes (double-quote substitution |
# turns \\\\ into \\, and sed turns \\ into \). |
sed -n \ |
-e "s/'/'\\\\''/g" \ |
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" |
;; |
*) |
# `set' quotes correctly as required by POSIX, so do not add quotes. |
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' |
;; |
esac >> confcache |
if cmp -s $cache_file confcache; then |
: |
else |
if test -w $cache_file; then |
echo "updating cache $cache_file" |
cat confcache > $cache_file |
else |
echo "not updating unwritable cache $cache_file" |
fi |
fi |
rm -f confcache |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
test "x$prefix" = xNONE && prefix=$ac_default_prefix |
# Let make expand exec_prefix. |
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
|
# Any assignment to VPATH causes Sun make to only execute |
# the first set of double-colon rules, so remove it if not needed. |
# If there is a colon in the path, we need to keep it. |
if test "x$srcdir" = x.; then |
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' |
fi |
|
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 |
|
# Transform confdefs.h into DEFS. |
# Protect against shell expansion while executing Makefile rules. |
# Protect against Makefile macro expansion. |
cat > conftest.defs <<\EOF |
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g |
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g |
s%\[%\\&%g |
s%\]%\\&%g |
s%\$%$$%g |
EOF |
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` |
rm -f conftest.defs |
|
|
# Without the "./", some shells look in PATH for config.status. |
: ${CONFIG_STATUS=./config.status} |
|
echo creating $CONFIG_STATUS |
rm -f $CONFIG_STATUS |
cat > $CONFIG_STATUS <<EOF |
#! /bin/sh |
# Generated automatically by configure. |
# Run this file to recreate the current configuration. |
# This directory was configured as follows, |
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: |
# |
# $0 $ac_configure_args |
# |
# Compiler output produced by configure, useful for debugging |
# configure, is in ./config.log if it exists. |
|
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" |
for ac_option |
do |
case "\$ac_option" in |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" |
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; |
-version | --version | --versio | --versi | --vers | --ver | --ve | --v) |
echo "$CONFIG_STATUS generated by autoconf version 2.12.1" |
exit 0 ;; |
-help | --help | --hel | --he | --h) |
echo "\$ac_cs_usage"; exit 0 ;; |
*) echo "\$ac_cs_usage"; exit 1 ;; |
esac |
done |
|
ac_given_srcdir=$srcdir |
|
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 |
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
# Protect against being on the right side of a sed subst in config.status. |
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; |
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF |
$ac_vpsub |
$extrasub |
s%@SHELL@%$SHELL%g |
s%@CFLAGS@%$CFLAGS%g |
s%@CPPFLAGS@%$CPPFLAGS%g |
s%@CXXFLAGS@%$CXXFLAGS%g |
s%@DEFS@%$DEFS%g |
s%@LDFLAGS@%$LDFLAGS%g |
s%@LIBS@%$LIBS%g |
s%@exec_prefix@%$exec_prefix%g |
s%@prefix@%$prefix%g |
s%@program_transform_name@%$program_transform_name%g |
s%@bindir@%$bindir%g |
s%@sbindir@%$sbindir%g |
s%@libexecdir@%$libexecdir%g |
s%@datadir@%$datadir%g |
s%@sysconfdir@%$sysconfdir%g |
s%@sharedstatedir@%$sharedstatedir%g |
s%@localstatedir@%$localstatedir%g |
s%@libdir@%$libdir%g |
s%@includedir@%$includedir%g |
s%@oldincludedir@%$oldincludedir%g |
s%@infodir@%$infodir%g |
s%@mandir@%$mandir%g |
s%@CC@%$CC%g |
s%@host@%$host%g |
s%@host_alias@%$host_alias%g |
s%@host_cpu@%$host_cpu%g |
s%@host_vendor@%$host_vendor%g |
s%@host_os@%$host_os%g |
s%@target@%$target%g |
s%@target_alias@%$target_alias%g |
s%@target_cpu@%$target_cpu%g |
s%@target_vendor@%$target_vendor%g |
s%@target_os@%$target_os%g |
s%@build@%$build%g |
s%@build_alias@%$build_alias%g |
s%@build_cpu@%$build_cpu%g |
s%@build_vendor@%$build_vendor%g |
s%@build_os@%$build_os%g |
|
CEOF |
EOF |
|
cat >> $CONFIG_STATUS <<\EOF |
|
# Split the substitutions into bite-sized pieces for seds with |
# small command number limits, like on Digital OSF/1 and HP-UX. |
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. |
ac_file=1 # Number of current file. |
ac_beg=1 # First line for current file. |
ac_end=$ac_max_sed_cmds # Line after last line for current file. |
ac_more_lines=: |
ac_sed_cmds="" |
while $ac_more_lines; do |
if test $ac_beg -gt 1; then |
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file |
else |
sed "${ac_end}q" conftest.subs > conftest.s$ac_file |
fi |
if test ! -s conftest.s$ac_file; then |
ac_more_lines=false |
rm -f conftest.s$ac_file |
else |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds="sed -f conftest.s$ac_file" |
else |
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" |
fi |
ac_file=`expr $ac_file + 1` |
ac_beg=$ac_end |
ac_end=`expr $ac_end + $ac_max_sed_cmds` |
fi |
done |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds=cat |
fi |
EOF |
|
cat >> $CONFIG_STATUS <<EOF |
|
CONFIG_FILES=\${CONFIG_FILES-"Makefile"} |
EOF |
cat >> $CONFIG_STATUS <<\EOF |
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then |
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". |
case "$ac_file" in |
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` |
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; |
*) ac_file_in="${ac_file}.in" ;; |
esac |
|
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. |
|
# Remove last slash and all that follows it. Not all systems have dirname. |
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` |
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then |
# The file is in a subdirectory. |
test ! -d "$ac_dir" && mkdir "$ac_dir" |
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" |
# A "../" for each directory in $ac_dir_suffix. |
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` |
else |
ac_dir_suffix= ac_dots= |
fi |
|
case "$ac_given_srcdir" in |
.) srcdir=. |
if test -z "$ac_dots"; then top_srcdir=. |
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; |
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; |
*) # Relative path. |
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" |
top_srcdir="$ac_dots$ac_given_srcdir" ;; |
esac |
|
|
echo creating "$ac_file" |
rm -f "$ac_file" |
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." |
case "$ac_file" in |
*Makefile*) ac_comsub="1i\\ |
# $configure_input" ;; |
*) ac_comsub= ;; |
esac |
|
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` |
sed -e "$ac_comsub |
s%@configure_input@%$configure_input%g |
s%@srcdir@%$srcdir%g |
s%@top_srcdir@%$top_srcdir%g |
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file |
fi; done |
rm -f conftest.s* |
|
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
EOF |
cat >> $CONFIG_STATUS <<\EOF |
|
exit 0 |
EOF |
chmod +x $CONFIG_STATUS |
rm -fr confdefs* $ac_clean_files |
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 |
|
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 1765)
@@ -0,0 +1,27 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+EXECUTABLES = usrthbasic usrthcore usrthfork
+
+all:
+ @echo "Nothing to be done for all..."
+
+info:
+install-info:
+dvi:
+install:
+uninstall: force
+installcheck:
+check:
+
+clean mostlyclean:
+ -rm -f *~ *.o *.ci
+ -rm -f core $(EXECUTABLES)
+
+distclean maintainer-clean realclean: clean
+ -rm -f Makefile config.status config.log
+ -rm -f *-init.exp
+ -rm -fr *.log summary detail *.plog *.sum *.psum site.*
+
+Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in
+ $(SHELL) ./config.status --recheck
Index: usrthbasic.exp
===================================================================
--- usrthbasic.exp (nonexistent)
+++ usrthbasic.exp (revision 1765)
@@ -0,0 +1,107 @@
+# usrthbasic.exp -- Expect script to test gdb with user threads
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel {
+ strace $tracelevel
+}
+
+if { [skip_hp_tests] } { continue }
+
+if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } {
+ verbose "HPUX thread test ignored for non-hppa or PA64 targets."
+ return 0
+}
+
+set testfile usrthbasic
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${srcdir}/${subdir}/${testfile}
+
+# To build the executable we need to link against the thread library.
+#
+# /opt/ansic/bin/cc -Ae +DAportable -g -o usrthbasic -lcma usrthbasic.c
+#
+## we have trouble building it on 11.0, so we use the prebuilt
+## executable instead.
+##
+##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
+## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+##}
+
+# We don't really seem to need longer waits.
+#
+##set oldtimeout $timeout
+##set timeout [expr "$timeout + 0"]
+##set oldverbose $verbose
+##set verbose 40
+
+#=========================
+#
+# Test looking at threads.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "b main" ".*Breakpoint 1.*" "b main"
+gdb_test "run" "Breakpoint 1, main.*:119.*" "run to main"
+gdb_test "b thread1" ".*Breakpoint 2.*" "b thread1"
+gdb_test "info threads" "\\* 1 system thread.*:119\[^(\]*" \
+ "info threads at main"
+gdb_test "c" "Breakpoint 2, thread1.*" "continue to thread1"
+gdb_test "info threads" \
+ "\\* 3 system thread.*thread1.*libcma.1.*libcma.1\[^(\]*" \
+ "info threads at main"
+gdb_test "b 165" "Breakpoint 3.*165.*" "break at main counter"
+gdb_test "c" "Breakpoint 3, main.*" "continue to main counter"
+gdb_test "info threads" " 4 system thread.*\\* 1 system thread.*main.*" \
+ "info threads at main counter"
+gdb_test "b 97" "Breakpoint 4.*97.*" "break at thread2 counter"
+gdb_test "b 81" "Breakpoint 5.*81.*" "break at thread1 counter"
+gdb_test "bt" "#0 main.* at \[^(\]*" "backtrace at main counter"
+
+# After switching to thread 4, the cma scheduler should schedule it next
+# and we should hit its breakpoint in thread2.
+gdb_test "thread 4" ".Switching to thread 4.*cma__dispatch.*" \
+ "switch to thread 4"
+gdb_test "bt" "#0 .*thread2.*" "backtrace at thread 4"
+sleep 1
+gdb_test "c" ".*Breakpoint 4, thread2.*" "continue and get to thread 4"
+
+# After switching to thread 1, the cma scheduler should schedule it next
+# and we should hit its breakpoint (in main).
+gdb_test "thread 1" ".*Switching to thread 1.*cma__dispatch.*" \
+ "switch to thread 1"
+sleep 1
+gdb_test "c" ".*Breakpoint 3, main.*usrthbasic.c:165.*" \
+ "continue and get to thread 1"
+
+# Done!
+#
+gdb_exit
+
+##set timeout $oldtimeout
+##set verbose $oldverbose
+
+return 0
Index: usrthfork.exp
===================================================================
--- usrthfork.exp (nonexistent)
+++ usrthfork.exp (revision 1765)
@@ -0,0 +1,72 @@
+# user_th_basic.exp -- Expect script to test gdb with user threads
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel {
+ strace $tracelevel
+}
+
+if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } {
+ verbose "HPUX thread test ignored for non-hppa or PA64 targets."
+ return 0
+}
+
+set testfile usrthfork
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${srcdir}/${subdir}/${testfile}
+
+# To build the executable we need to link against the thread library.
+#
+# /opt/ansic/bin/cc -Ae -g -o usrthfork -lcma usrthfork.c
+#
+## we have trouble building it on 11.0, so we use the prebuilt
+## executable instead.
+##
+##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
+## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+##}
+
+#=========================
+#
+# Test looking at threads.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set follow-fork-mode parent" ".*" "set follow-fork-mode parent"
+gdb_test "b main" "Breakpoint 1.*" "b main"
+gdb_test "run" "Breakpoint 1, main.*:8.*" "run to main"
+##gdb_test "next" \
+## ".*New process.*Detaching after fork from process.*13.*parent.*" \
+## "next on CMA fork"
+send_gdb "next\n"
+gdb_expect {
+ -re ".*Detaching after fork from.*$gdb_prompt $" {
+ pass "next on CMA fork"
+ }
+ -re ".*$gdb_prompt $" { fail "next on CMA fork" }
+ timeout { fail "(timeout) next on CMA fork" }
+}
+exec sleep 1
+
+gdb_exit
+
+return 0
Index: configure.in
===================================================================
--- configure.in (nonexistent)
+++ configure.in (revision 1765)
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory. For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(usrthbasic.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
Index: usrthbasic.c
===================================================================
--- usrthbasic.c (nonexistent)
+++ usrthbasic.c (revision 1765)
@@ -0,0 +1,171 @@
+#include
+
+/* #include "config.h" */
+#define HAVE_PTHREAD_H
+#define __hpux__
+#define __osf__
+
+#ifndef HAVE_PTHREAD_H
+
+/* Don't even try to compile. In fact, cause a syntax error that we can
+ look for as a compiler error message and know that we have no pthread
+ support. In that case we can just suppress the test completely. */
+
+#error "no posix threads support"
+
+#else
+
+/* OK. We have the right header. If we try to compile this and fail, then
+ there is something wrong and the user should know about it so the testsuite
+ should issue an ERROR result.. */
+
+#ifdef __linux__
+#define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */
+#endif
+
+#include
+
+/* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create
+ is prototyped to be just a "pthread_attr_t", while under Solaris it
+ is a "pthread_attr_t *". Arg! */
+
+#if defined (__osf__) || defined (__hpux__)
+#define PTHREAD_CREATE_ARG2(arg) arg
+#define PTHREAD_CREATE_NULL_ARG2 null_attr
+static pthread_attr_t null_attr;
+#else
+#define PTHREAD_CREATE_ARG2(arg) &arg
+#define PTHREAD_CREATE_NULL_ARG2 NULL
+#endif
+
+static int verbose = 0;
+
+static void
+common_routine (arg)
+ int arg;
+{
+ static int from_thread1;
+ static int from_thread2;
+ static int from_main;
+ static int hits;
+ static int full_coverage;
+
+ if (verbose) printf("common_routine (%d)\n", arg);
+ hits++;
+ switch (arg)
+ {
+ case 0:
+ from_main++;
+ break;
+ case 1:
+ from_thread1++;
+ break;
+ case 2:
+ from_thread2++;
+ break;
+ }
+ if (from_main && from_thread1 && from_thread2)
+ full_coverage = 1;
+}
+
+static void *
+thread1 (void *arg)
+{
+ int i;
+ int z = 0;
+
+ if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ());
+ for (i=1; i <= 10000000; i++)
+ {
+ if (verbose) printf("thread1 %d\n", pthread_self ());
+ z += i;
+ common_routine (1);
+ sleep(1);
+ }
+}
+
+static void *
+thread2 (void * arg)
+{
+ int i;
+ int k = 0;
+
+ if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ());
+ for (i=1; i <= 10000000; i++)
+ {
+ if (verbose) printf("thread2 %d\n", pthread_self ());
+ k += i;
+ common_routine (2);
+ sleep(1);
+ }
+ sleep(100);
+}
+
+int
+foo (a, b, c)
+ int a, b, c;
+{
+ int d, e, f;
+
+ if (verbose) printf("a=%d\n", a);
+}
+
+main(argc, argv)
+ int argc;
+ char **argv;
+{
+ pthread_t tid1, tid2;
+ int j;
+ int t = 0;
+ void (*xxx) ();
+ pthread_attr_t attr;
+
+ if (verbose) printf ("pid = %d\n", getpid());
+
+ foo (1, 2, 3);
+
+#ifndef __osf__
+ if (pthread_attr_init (&attr))
+ {
+ perror ("pthread_attr_init 1");
+ exit (1);
+ }
+#endif
+
+#ifdef PTHREAD_SCOPE_SYSTEM
+ if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM))
+ {
+ perror ("pthread_attr_setscope 1");
+ exit (1);
+ }
+#endif
+
+ if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface))
+ {
+ perror ("pthread_create 1");
+ exit (1);
+ }
+ if (verbose) printf ("Made thread %d\n", tid1);
+ sleep (1);
+
+ if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef))
+ {
+ perror ("pthread_create 2");
+ exit (1);
+ }
+ if (verbose) printf("Made thread %d\n", tid2);
+
+ sleep (1);
+
+ for (j = 1; j <= 10000000; j++)
+ {
+ if (verbose) printf("top %d\n", pthread_self ());
+ common_routine (0);
+ sleep(1);
+ t += j;
+ }
+
+ exit(0);
+}
+
+#endif /* ifndef HAVE_PTHREAD_H */
Index: usrthfork.c
===================================================================
--- usrthfork.c (nonexistent)
+++ usrthfork.c (revision 1765)
@@ -0,0 +1,17 @@
+#include
+#include
+#include
+
+int main(void){
+pid_t pid;
+
+switch (pid = fork()){
+ case 0:
+ printf("child\n");
+ break;
+ default:
+ printf("parent\n");
+ break;
+ }
+ return 0;
+}
Index: usrthcore.exp
===================================================================
--- usrthcore.exp (nonexistent)
+++ usrthcore.exp (revision 1765)
@@ -0,0 +1,89 @@
+# usrthcore.exp -- Expect script to test gdb with user threads
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel {
+ strace $tracelevel
+}
+
+if { [skip_hp_tests] } { continue }
+
+if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } {
+ verbose "HPUX thread test ignored for non-hppa or PA64 targets."
+ return 0
+}
+
+set testfile usrthcore
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${srcdir}/${subdir}/${testfile}
+
+# To build the executable we need to link against the thread library.
+#
+# /opt/ansic/bin/cc -Ae +DAportable -g -o usrthcore -lcma usrthcore.c
+#
+## we have trouble building it on 11.0, so we use the prebuilt
+## executable instead.
+##
+##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c -lcma" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } {
+## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+##}
+
+#=========================
+#
+# Test looking at threads in a core file
+#
+
+remote_exec build "rm -f core"
+remote_exec build "${binfile}"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+gdb_test "core-file core" \
+ ".*Core was generated by `usrthcore'.*in main.*usrthcore.c:170.*" \
+ "load corefile"
+
+gdb_test "info thread" \
+ " 4 .*cma__dispatch.*\\* 1 .*in main.*usrthcore.c:170.*" \
+ "info thread on core file"
+gdb_test "bt" "#0.*in main.*usrthcore.c:170" "backtrace on active thread"
+gdb_test "thread 4" ".*Switching to thread 4.*cma__dispatch.*" \
+ "switch to thread 4 (thread2 procedure)"
+gdb_test "bt" "#0.*cma__dispatch.*thread2.*usrthcore.c:99.*" \
+ "Backtrace on inactive thread (thread2 procedure)"
+gdb_test "b thread1" "Breakpoint 1.*usrthcore.c, line 75.*" \
+ "break on thread1"
+gdb_test "run" "Starting program.*Breakpoint 1, thread1.*usrthcore.c:75.*" \
+ "run program, get to thread1 procedure"
+gdb_test "info threads" "\\* \[23\] .*thread1.* 1 .*cma__dispatch.*" \
+ "info threads after running core"
+
+
+# Done!
+#
+gdb_exit
+
+remote_exec build "rm -f core"
+
+return 0