OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /or1k/trunk/gdb-5.0/gdb/testsuite/gdb.hp/gdb.threads-hp
    from Rev 107 to Rev 1765
    ↔ Reverse comparison
  •

Rev 107 → Rev 1765

/usrthcore.c
0,0 → 1,177
#include <stdio.h>
 
/* #include "config.h" */
#define HAVE_PTHREAD_H
#define __hpux__
#define __osf__
 
#ifndef HAVE_PTHREAD_H
 
/* Don't even try to compile. In fact, cause a syntax error that we can
look for as a compiler error message and know that we have no pthread
support. In that case we can just suppress the test completely. */
 
#error "no posix threads support"
 
#else
 
/* OK. We have the right header. If we try to compile this and fail, then
there is something wrong and the user should know about it so the testsuite
should issue an ERROR result.. */
 
#ifdef __linux__
#define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */
#endif
 
#include <pthread.h>
 
/* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create
is prototyped to be just a "pthread_attr_t", while under Solaris it
is a "pthread_attr_t *". Arg! */
 
#if defined (__osf__) || defined (__hpux__)
#define PTHREAD_CREATE_ARG2(arg) arg
#define PTHREAD_CREATE_NULL_ARG2 null_attr
static pthread_attr_t null_attr;
#else
#define PTHREAD_CREATE_ARG2(arg) &arg
#define PTHREAD_CREATE_NULL_ARG2 NULL
#endif
 
static int verbose = 0;
 
static void
common_routine (arg)
int arg;
{
static int from_thread1;
static int from_thread2;
static int from_main;
static int hits;
static int full_coverage;
 
if (verbose) printf("common_routine (%d)\n", arg);
hits++;
switch (arg)
{
case 0:
from_main++;
break;
case 1:
from_thread1++;
break;
case 2:
from_thread2++;
break;
}
if (from_main && from_thread1 && from_thread2)
full_coverage = 1;
}
 
static void *
thread1 (void *arg)
{
int i;
int z = 0;
 
if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ());
for (i=1; i <= 10000000; i++)
{
if (verbose) printf("thread1 %d\n", pthread_self ());
z += i;
common_routine (1);
sleep(1);
}
}
 
static void *
thread2 (void * arg)
{
int i;
int k = 0;
 
if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ());
for (i=1; i <= 10000000; i++)
{
if (verbose) printf("thread2 %d\n", pthread_self ());
k += i;
common_routine (2);
sleep(1);
}
sleep(100);
}
 
int
foo (a, b, c)
int a, b, c;
{
int d, e, f;
 
if (verbose) printf("a=%d\n", a);
}
 
main(argc, argv)
int argc;
char **argv;
{
pthread_t tid1, tid2;
int j;
int t = 0;
void (*xxx) ();
pthread_attr_t attr;
 
if (verbose) printf ("pid = %d\n", getpid());
 
foo (1, 2, 3);
 
#ifndef __osf__
if (pthread_attr_init (&attr))
{
perror ("pthread_attr_init 1");
exit (1);
}
#endif
 
#ifdef PTHREAD_SCOPE_SYSTEM
if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM))
{
perror ("pthread_attr_setscope 1");
exit (1);
}
#endif
 
if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface))
{
perror ("pthread_create 1");
exit (1);
}
if (verbose) printf ("Made thread %d\n", tid1);
sleep (1);
 
if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef))
{
perror ("pthread_create 2");
exit (1);
}
if (verbose) printf("Made thread %d\n", tid2);
 
sleep (1);
 
for (j = 1; j <= 10000000; j++)
{
if (verbose) printf("top %d\n", pthread_self ());
common_routine (0);
sleep(1);
t += j;
if (j > 3)
{
int* int_p;
int_p = 0;
*int_p = 1;
}
}
exit(0);
}
 
#endif /* ifndef HAVE_PTHREAD_H */
/configure
0,0 → 1,899
#! /bin/sh
 
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.12.1
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
 
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
 
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
 
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
 
ac_prev=
for ac_option
do
 
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
 
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
 
# Accept the important Cygnus configure options, so we can diagnose typos.
 
case "$ac_option" in
 
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
 
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
 
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
 
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
 
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
 
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
 
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
 
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
 
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
 
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
 
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
 
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
 
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
 
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
 
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
 
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
 
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
 
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
 
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
 
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
 
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
 
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
 
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
 
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
 
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
 
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
 
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
 
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
 
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
 
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
 
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
 
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
 
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.12.1"
exit 0 ;;
 
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
 
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
 
--x)
# Obsolete; use --with-x.
with_x=yes ;;
 
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
 
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
 
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
 
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
 
esac
done
 
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
 
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
 
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
 
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
 
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
 
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=usrthbasic.exp
 
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
 
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
 
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
 
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
 
 
 
CC=${CC-cc}
 
ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../../.. $srcdir/`cd $srcdir;pwd`/../../../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
 
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
 
 
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
 
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:573: checking host system type" >&5
 
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
 
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
 
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:594: checking target system type" >&5
 
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
 
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
 
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:612: checking build system type" >&5
 
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
 
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
 
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
 
 
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set) 2>&1 | grep ac_space` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
 
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
 
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
 
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
 
 
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
 
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
 
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
 
ac_given_srcdir=$srcdir
 
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
 
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
 
CEOF
EOF
 
cat >> $CONFIG_STATUS <<\EOF
 
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
 
cat >> $CONFIG_STATUS <<EOF
 
CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
 
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
 
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
 
 
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
 
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
 
EOF
cat >> $CONFIG_STATUS <<EOF
 
EOF
cat >> $CONFIG_STATUS <<\EOF
 
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
configure Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: Makefile.in =================================================================== --- Makefile.in (nonexistent) +++ Makefile.in (revision 1765) @@ -0,0 +1,27 @@ +VPATH = @srcdir@ +srcdir = @srcdir@ + +EXECUTABLES = usrthbasic usrthcore usrthfork + +all: + @echo "Nothing to be done for all..." + +info: +install-info: +dvi: +install: +uninstall: force +installcheck: +check: + +clean mostlyclean: + -rm -f *~ *.o *.ci + -rm -f core $(EXECUTABLES) + +distclean maintainer-clean realclean: clean + -rm -f Makefile config.status config.log + -rm -f *-init.exp + -rm -fr *.log summary detail *.plog *.sum *.psum site.* + +Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in + $(SHELL) ./config.status --recheck Index: usrthbasic.exp =================================================================== --- usrthbasic.exp (nonexistent) +++ usrthbasic.exp (revision 1765) @@ -0,0 +1,107 @@ +# usrthbasic.exp -- Expect script to test gdb with user threads +# Copyright (C) 1992 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# use this to debug: +# +#log_user 1 + +if $tracelevel { + strace $tracelevel +} + +if { [skip_hp_tests] } { continue } + +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { + verbose "HPUX thread test ignored for non-hppa or PA64 targets." + return 0 +} + +set testfile usrthbasic +set srcfile ${srcdir}/${subdir}/${testfile}.c +set binfile ${srcdir}/${subdir}/${testfile} + +# To build the executable we need to link against the thread library. +# +# /opt/ansic/bin/cc -Ae +DAportable -g -o usrthbasic -lcma usrthbasic.c +# +## we have trouble building it on 11.0, so we use the prebuilt +## executable instead. +## +##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } { +## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +##} + +# We don't really seem to need longer waits. +# +##set oldtimeout $timeout +##set timeout [expr "$timeout + 0"] +##set oldverbose $verbose +##set verbose 40 + +#========================= +# +# Test looking at threads. +# +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +gdb_test "b main" ".*Breakpoint 1.*" "b main" +gdb_test "run" "Breakpoint 1, main.*:119.*" "run to main" +gdb_test "b thread1" ".*Breakpoint 2.*" "b thread1" +gdb_test "info threads" "\\* 1 system thread.*:119\[^(\]*" \ + "info threads at main" +gdb_test "c" "Breakpoint 2, thread1.*" "continue to thread1" +gdb_test "info threads" \ + "\\* 3 system thread.*thread1.*libcma.1.*libcma.1\[^(\]*" \ + "info threads at main" +gdb_test "b 165" "Breakpoint 3.*165.*" "break at main counter" +gdb_test "c" "Breakpoint 3, main.*" "continue to main counter" +gdb_test "info threads" " 4 system thread.*\\* 1 system thread.*main.*" \ + "info threads at main counter" +gdb_test "b 97" "Breakpoint 4.*97.*" "break at thread2 counter" +gdb_test "b 81" "Breakpoint 5.*81.*" "break at thread1 counter" +gdb_test "bt" "#0 main.* at \[^(\]*" "backtrace at main counter" + +# After switching to thread 4, the cma scheduler should schedule it next +# and we should hit its breakpoint in thread2. +gdb_test "thread 4" ".Switching to thread 4.*cma__dispatch.*" \ + "switch to thread 4" +gdb_test "bt" "#0 .*thread2.*" "backtrace at thread 4" +sleep 1 +gdb_test "c" ".*Breakpoint 4, thread2.*" "continue and get to thread 4" + +# After switching to thread 1, the cma scheduler should schedule it next +# and we should hit its breakpoint (in main). +gdb_test "thread 1" ".*Switching to thread 1.*cma__dispatch.*" \ + "switch to thread 1" +sleep 1 +gdb_test "c" ".*Breakpoint 3, main.*usrthbasic.c:165.*" \ + "continue and get to thread 1" + +# Done! +# +gdb_exit + +##set timeout $oldtimeout +##set verbose $oldverbose + +return 0 Index: usrthfork.exp =================================================================== --- usrthfork.exp (nonexistent) +++ usrthfork.exp (revision 1765) @@ -0,0 +1,72 @@ +# user_th_basic.exp -- Expect script to test gdb with user threads +# Copyright (C) 1992 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +if $tracelevel { + strace $tracelevel +} + +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { + verbose "HPUX thread test ignored for non-hppa or PA64 targets." + return 0 +} + +set testfile usrthfork +set srcfile ${srcdir}/${subdir}/${testfile}.c +set binfile ${srcdir}/${subdir}/${testfile} + +# To build the executable we need to link against the thread library. +# +# /opt/ansic/bin/cc -Ae -g -o usrthfork -lcma usrthfork.c +# +## we have trouble building it on 11.0, so we use the prebuilt +## executable instead. +## +##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } { +## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +##} + +#========================= +# +# Test looking at threads. +# +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +gdb_test "set follow-fork-mode parent" ".*" "set follow-fork-mode parent" +gdb_test "b main" "Breakpoint 1.*" "b main" +gdb_test "run" "Breakpoint 1, main.*:8.*" "run to main" +##gdb_test "next" \ +## ".*New process.*Detaching after fork from process.*13.*parent.*" \ +## "next on CMA fork" +send_gdb "next\n" +gdb_expect { + -re ".*Detaching after fork from.*$gdb_prompt $" { + pass "next on CMA fork" + } + -re ".*$gdb_prompt $" { fail "next on CMA fork" } + timeout { fail "(timeout) next on CMA fork" } +} +exec sleep 1 + +gdb_exit + +return 0 Index: configure.in =================================================================== --- configure.in (nonexistent) +++ configure.in (revision 1765) @@ -0,0 +1,15 @@ +dnl Process this file file with autoconf to produce a configure script. +dnl This file is a shell script fragment that supplies the information +dnl necessary to tailor a template configure script into the configure +dnl script appropriate for this directory. For more information, check +dnl any existing configure script. + +AC_PREREQ(2.5) +AC_INIT(usrthbasic.exp) + +CC=${CC-cc} +AC_SUBST(CC) +AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../../..) +AC_CANONICAL_SYSTEM + +AC_OUTPUT(Makefile) Index: usrthbasic.c =================================================================== --- usrthbasic.c (nonexistent) +++ usrthbasic.c (revision 1765) @@ -0,0 +1,171 @@ +#include + +/* #include "config.h" */ +#define HAVE_PTHREAD_H +#define __hpux__ +#define __osf__ + +#ifndef HAVE_PTHREAD_H + +/* Don't even try to compile. In fact, cause a syntax error that we can + look for as a compiler error message and know that we have no pthread + support. In that case we can just suppress the test completely. */ + +#error "no posix threads support" + +#else + +/* OK. We have the right header. If we try to compile this and fail, then + there is something wrong and the user should know about it so the testsuite + should issue an ERROR result.. */ + +#ifdef __linux__ +#define _MIT_POSIX_THREADS 1 /* Linux (or at least RedHat 4.0) needs this */ +#endif + +#include + +/* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create + is prototyped to be just a "pthread_attr_t", while under Solaris it + is a "pthread_attr_t *". Arg! */ + +#if defined (__osf__) || defined (__hpux__) +#define PTHREAD_CREATE_ARG2(arg) arg +#define PTHREAD_CREATE_NULL_ARG2 null_attr +static pthread_attr_t null_attr; +#else +#define PTHREAD_CREATE_ARG2(arg) &arg +#define PTHREAD_CREATE_NULL_ARG2 NULL +#endif + +static int verbose = 0; + +static void +common_routine (arg) + int arg; +{ + static int from_thread1; + static int from_thread2; + static int from_main; + static int hits; + static int full_coverage; + + if (verbose) printf("common_routine (%d)\n", arg); + hits++; + switch (arg) + { + case 0: + from_main++; + break; + case 1: + from_thread1++; + break; + case 2: + from_thread2++; + break; + } + if (from_main && from_thread1 && from_thread2) + full_coverage = 1; +} + +static void * +thread1 (void *arg) +{ + int i; + int z = 0; + + if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ()); + for (i=1; i <= 10000000; i++) + { + if (verbose) printf("thread1 %d\n", pthread_self ()); + z += i; + common_routine (1); + sleep(1); + } +} + +static void * +thread2 (void * arg) +{ + int i; + int k = 0; + + if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ()); + for (i=1; i <= 10000000; i++) + { + if (verbose) printf("thread2 %d\n", pthread_self ()); + k += i; + common_routine (2); + sleep(1); + } + sleep(100); +} + +int +foo (a, b, c) + int a, b, c; +{ + int d, e, f; + + if (verbose) printf("a=%d\n", a); +} + +main(argc, argv) + int argc; + char **argv; +{ + pthread_t tid1, tid2; + int j; + int t = 0; + void (*xxx) (); + pthread_attr_t attr; + + if (verbose) printf ("pid = %d\n", getpid()); + + foo (1, 2, 3); + +#ifndef __osf__ + if (pthread_attr_init (&attr)) + { + perror ("pthread_attr_init 1"); + exit (1); + } +#endif + +#ifdef PTHREAD_SCOPE_SYSTEM + if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM)) + { + perror ("pthread_attr_setscope 1"); + exit (1); + } +#endif + + if (pthread_create (&tid1, pthread_attr_default, thread1, (void *) 0xfeedface)) + { + perror ("pthread_create 1"); + exit (1); + } + if (verbose) printf ("Made thread %d\n", tid1); + sleep (1); + + if (pthread_create (&tid2, null_attr, thread2, (void *) 0xdeadbeef)) + { + perror ("pthread_create 2"); + exit (1); + } + if (verbose) printf("Made thread %d\n", tid2); + + sleep (1); + + for (j = 1; j <= 10000000; j++) + { + if (verbose) printf("top %d\n", pthread_self ()); + common_routine (0); + sleep(1); + t += j; + } + + exit(0); +} + +#endif /* ifndef HAVE_PTHREAD_H */ Index: usrthfork.c =================================================================== --- usrthfork.c (nonexistent) +++ usrthfork.c (revision 1765) @@ -0,0 +1,17 @@ +#include +#include +#include + +int main(void){ +pid_t pid; + +switch (pid = fork()){ + case 0: + printf("child\n"); + break; + default: + printf("parent\n"); + break; + } + return 0; +} Index: usrthcore.exp =================================================================== --- usrthcore.exp (nonexistent) +++ usrthcore.exp (revision 1765) @@ -0,0 +1,89 @@ +# usrthcore.exp -- Expect script to test gdb with user threads +# Copyright (C) 1992 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# use this to debug: +# +#log_user 1 + +if $tracelevel { + strace $tracelevel +} + +if { [skip_hp_tests] } { continue } + +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { + verbose "HPUX thread test ignored for non-hppa or PA64 targets." + return 0 +} + +set testfile usrthcore +set srcfile ${srcdir}/${subdir}/${testfile}.c +set binfile ${srcdir}/${subdir}/${testfile} + +# To build the executable we need to link against the thread library. +# +# /opt/ansic/bin/cc -Ae +DAportable -g -o usrthcore -lcma usrthcore.c +# +## we have trouble building it on 11.0, so we use the prebuilt +## executable instead. +## +##if { [gdb_compile "${srcdir}/${subdir}/${testfile}.c -lcma" "${binfile}" executable {debug additional_flags=-Ae ldflags=-lcma}] != "" } { +## gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +##} + +#========================= +# +# Test looking at threads in a core file +# + +remote_exec build "rm -f core" +remote_exec build "${binfile}" + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} +gdb_test "core-file core" \ + ".*Core was generated by `usrthcore'.*in main.*usrthcore.c:170.*" \ + "load corefile" + +gdb_test "info thread" \ + " 4 .*cma__dispatch.*\\* 1 .*in main.*usrthcore.c:170.*" \ + "info thread on core file" +gdb_test "bt" "#0.*in main.*usrthcore.c:170" "backtrace on active thread" +gdb_test "thread 4" ".*Switching to thread 4.*cma__dispatch.*" \ + "switch to thread 4 (thread2 procedure)" +gdb_test "bt" "#0.*cma__dispatch.*thread2.*usrthcore.c:99.*" \ + "Backtrace on inactive thread (thread2 procedure)" +gdb_test "b thread1" "Breakpoint 1.*usrthcore.c, line 75.*" \ + "break on thread1" +gdb_test "run" "Starting program.*Breakpoint 1, thread1.*usrthcore.c:75.*" \ + "run program, get to thread1 procedure" +gdb_test "info threads" "\\* \[23\] .*thread1.* 1 .*cma__dispatch.*" \ + "info threads after running core" + + +# Done! +# +gdb_exit + +remote_exec build "rm -f core" + +return 0

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.