URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/gdb-5.3/utils/sparclite
- from Rev 1181 to Rev 1765
- ↔ Reverse comparison
Rev 1181 → Rev 1765
/aload.c
0,0 → 1,312
/* Program to load an image into the SPARClite monitor board |
Copyright 1993, 1994, 1995 Free Software Foundation, Inc. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
|
/* Call with: |
|
aload PROG TTY |
|
ie: aload hello /dev/ttya |
|
*/ |
|
#include <stdio.h> |
|
#include "ansidecl.h" |
|
#ifdef ANSI_PROTOTYPES |
#include <stdarg.h> |
#else |
#include <varargs.h> |
#endif |
|
#include "libiberty.h" |
#include "bfd.h" |
|
#include <errno.h> |
#include <unistd.h> |
#include <fcntl.h> |
|
#ifndef HAVE_TERMIOS |
you lose |
#endif |
|
#if defined(HAVE_TERMIOS) |
#include <termios.h> |
#elif defined(HAVE_TERMIO) |
#include <termio.h> |
#elif defined(HAVE_SGTTY) |
#include <sgtty.h> |
#endif |
|
#define min(A, B) (((A) < (B)) ? (A) : (B)) |
|
/* Where the code goes by default. */ |
|
#ifndef LOAD_ADDRESS |
#define LOAD_ADDRESS 0x40000000 |
#endif |
|
int quiet = 0; |
|
static void |
usage () |
{ |
fprintf (stderr, "usage: aload [-q] file device\n"); |
exit (1); |
} |
|
static void |
#ifdef ANSI_PROTOTYPES |
sys_error (char *msg, ...) |
#else |
sys_error (va_alist) |
va_dcl |
#endif |
{ |
int e = errno; |
va_list args; |
|
#ifdef ANSI_PROTOTYPES |
va_start (args, msg); |
#else |
va_start (args); |
#endif |
|
#ifdef ANSI_PROTOTYPES |
vfprintf (stderr, msg, args); |
#else |
{ |
char *msg1; |
|
msg1 = va_arg (args, char *); |
vfprintf (stderr, msg1, args); |
} |
#endif |
va_end (args); |
|
fprintf (stderr, ": %s\n", strerror(e)); |
exit (1); |
} |
|
static void |
#ifdef ANSI_PROTOTYPES |
error (char *msg, ...) |
#else |
error (va_alist) |
va_dcl |
#endif |
{ |
va_list args; |
|
#ifdef ANSI_PROTOTYPES |
va_start (args, msg); |
#else |
va_start (args); |
#endif |
|
#ifdef ANSI_PROTOTYPES |
vfprintf (stderr, msg, args); |
#else |
{ |
char *msg1; |
|
msg1 = va_arg (args, char *); |
vfprintf (stderr, msg1, args); |
} |
#endif |
va_end (args); |
|
fputc ('\n', stderr); |
exit (1); |
} |
|
static int ttyfd; |
|
static void |
sendex (outtxt, outlen, intxt, inlen, id) |
unsigned char *outtxt; |
int outlen; |
unsigned char *intxt; |
int inlen; |
char *id; |
{ |
char buf[100]; |
int cc; |
|
if (outlen > 0) |
{ |
cc = write (ttyfd, outtxt, outlen); |
if (cc != outlen) |
sys_error ("Write %s failed", id); |
} |
|
if (inlen > 0) |
{ |
cc = read (ttyfd, buf, inlen); /* Get reply */ |
if (cc != inlen) |
sys_error ("Read %s reply failed", id); |
if (bcmp (buf, intxt, inlen) != 0) |
error ("Bad reply to %s", id); |
} |
} |
|
extern int optind; |
|
int |
main (argc, argv) |
int argc; |
char **argv; |
{ |
struct termios termios; |
asection *section; |
bfd *pbfd; |
unsigned long entry; |
int c; |
|
while ((c = getopt (argc, argv, "q")) != EOF) |
{ |
switch (c) |
{ |
case 'q': |
quiet = 1; |
break; |
default: |
usage(); |
} |
} |
argc -= optind; |
argv += optind; |
|
if (argc != 2) |
usage(); |
|
pbfd = bfd_openr (argv[0], 0); |
|
if (pbfd == NULL) |
sys_error ("Open of PROG failed"); |
|
/* setup the tty. Must be raw, no flow control, 9600 baud */ |
|
ttyfd = open (argv[1], O_RDWR); |
if (ttyfd == -1) |
sys_error ("Open of TTY failed"); |
|
if (tcgetattr(ttyfd, &termios)) |
sys_error ("tcgetattr failed"); |
|
termios.c_iflag = 0; |
termios.c_oflag = 0; |
termios.c_cflag = CS8 | CREAD | CLOCAL; |
termios.c_lflag = 0; |
termios.c_cc[VMIN] = 1; |
termios.c_cc[VTIME] = 0; |
|
if (cfsetospeed (&termios, B9600) |
|| cfsetispeed (&termios, B9600)) |
sys_error ("cfset{i|o}speed failed"); |
|
if (tcsetattr (ttyfd, TCSANOW, &termios)) |
sys_error ("tcsetattr failed"); |
|
/* The char is documented as 0xaa, \252 is portable octal form. */ |
sendex("", 1, "\252", 1, "alive?"); |
sendex ("U", 1, "U", 1, "alive"); |
if (!quiet) |
printf ("[SPARClite appears to be alive]\n"); |
|
if (!bfd_check_format (pbfd, bfd_object)) |
error ("It doesn't seem to be an object file"); |
|
for (section = pbfd->sections; section; section = section->next) |
{ |
if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC) |
{ |
bfd_vma section_address; |
unsigned long section_size; |
const char *section_name; |
|
section_name = bfd_get_section_name (pbfd, section); |
|
section_address = bfd_get_section_vma (pbfd, section); |
/* Adjust sections from a.out files, since they don't |
carry their addresses with. */ |
if (bfd_get_flavour (pbfd) == bfd_target_aout_flavour) |
section_address += LOAD_ADDRESS; |
section_size = bfd_section_size (pbfd, section); |
|
if (!quiet) |
printf ("[Loading section %s at %lx (%ld bytes)]\n", |
section_name, section_address, section_size); |
|
/* Text, data or lit */ |
if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) |
{ |
file_ptr fptr; |
|
fptr = 0; |
|
while (section_size > 0) |
{ |
char buffer[1024]; |
int count, i; |
unsigned char checksum; |
static char inds[] = "|/-\\"; |
static int k = 0; |
|
count = min (section_size, 1024); |
|
bfd_get_section_contents (pbfd, section, buffer, fptr, |
count); |
|
checksum = 0; |
for (i = 0; i < count; i++) |
checksum += buffer[i]; |
|
if (!quiet) |
{ |
printf ("\r%c", inds[k++ % 4]); |
fflush (stdout); |
} |
|
sendex ("\001", 1, "Z", 1, "load command"); |
sendex (§ion_address, 4, NULL, 0, "load address"); |
sendex (&count, 4, NULL, 0, "program size"); |
sendex (buffer, count, &checksum, 1, "program"); |
|
section_address += count; |
fptr += count; |
section_size -= count; |
} |
} |
else /* BSS */ |
{ |
if (!quiet) |
printf ("Not loading BSS \n"); |
} |
} |
} |
|
entry = bfd_get_start_address (pbfd); |
|
if (!quiet) |
printf ("[Starting %s at 0x%lx]\n", argv[0], entry); |
|
sendex ("\003", 1, NULL, 0, "exec command"); |
sendex (&entry, 4, "U", 1, "program start"); |
|
exit (0); |
} |
/configure
0,0 → 1,1402
#! /bin/sh |
|
# Guess values for system-dependent variables and create Makefiles. |
# Generated automatically using autoconf version 2.10 |
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. |
# |
# This configure script is free software; the Free Software Foundation |
# gives unlimited permission to copy, distribute and modify it. |
|
# Defaults: |
ac_help= |
ac_default_prefix=/usr/local |
# Any additions from configure.in: |
|
# Initialize some variables set by options. |
# The variables have the same names as the options, with |
# dashes changed to underlines. |
build=NONE |
cache_file=./config.cache |
exec_prefix=NONE |
host=NONE |
no_create= |
nonopt=NONE |
no_recursion= |
prefix=NONE |
program_prefix=NONE |
program_suffix=NONE |
program_transform_name=s,x,x, |
silent= |
site= |
srcdir= |
target=NONE |
verbose= |
x_includes=NONE |
x_libraries=NONE |
bindir='${exec_prefix}/bin' |
sbindir='${exec_prefix}/sbin' |
libexecdir='${exec_prefix}/libexec' |
datadir='${prefix}/share' |
sysconfdir='${prefix}/etc' |
sharedstatedir='${prefix}/com' |
localstatedir='${prefix}/var' |
libdir='${exec_prefix}/lib' |
includedir='${prefix}/include' |
oldincludedir='/usr/include' |
infodir='${prefix}/info' |
mandir='${prefix}/man' |
|
# Initialize some other variables. |
subdirs= |
MFLAGS= MAKEFLAGS= |
|
ac_prev= |
for ac_option |
do |
|
# If the previous option needs an argument, assign it. |
if test -n "$ac_prev"; then |
eval "$ac_prev=\$ac_option" |
ac_prev= |
continue |
fi |
|
case "$ac_option" in |
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; |
*) ac_optarg= ;; |
esac |
|
# Accept the important Cygnus configure options, so we can diagnose typos. |
|
case "$ac_option" in |
|
-bindir | --bindir | --bindi | --bind | --bin | --bi) |
ac_prev=bindir ;; |
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
bindir="$ac_optarg" ;; |
|
-build | --build | --buil | --bui | --bu) |
ac_prev=build ;; |
-build=* | --build=* | --buil=* | --bui=* | --bu=*) |
build="$ac_optarg" ;; |
|
-cache-file | --cache-file | --cache-fil | --cache-fi \ |
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
ac_prev=cache_file ;; |
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
cache_file="$ac_optarg" ;; |
|
-datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
ac_prev=datadir ;; |
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| --da=*) |
datadir="$ac_optarg" ;; |
|
-disable-* | --disable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
eval "enable_${ac_feature}=no" ;; |
|
-enable-* | --enable-*) |
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } |
fi |
ac_feature=`echo $ac_feature| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "enable_${ac_feature}='$ac_optarg'" ;; |
|
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| --exec | --exe | --ex) |
ac_prev=exec_prefix ;; |
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| --exec=* | --exe=* | --ex=*) |
exec_prefix="$ac_optarg" ;; |
|
-gas | --gas | --ga | --g) |
# Obsolete; use --with-gas. |
with_gas=yes ;; |
|
-help | --help | --hel | --he) |
# Omit some internal or obsolete options to make the list less imposing. |
# This message is too long to be a string in the A/UX 3.1 sh. |
cat << EOF |
Usage: configure [options] [host] |
Options: [defaults in brackets after descriptions] |
Configuration: |
--cache-file=FILE cache test results in FILE |
--help print this message |
--no-create do not create output files |
--quiet, --silent do not print \`checking...' messages |
--version print the version of autoconf that created configure |
Directory and file names: |
--prefix=PREFIX install architecture-independent files in PREFIX |
[$ac_default_prefix] |
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
[same as prefix] |
--bindir=DIR user executables in DIR [EPREFIX/bin] |
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin] |
--libexecdir=DIR program executables in DIR [EPREFIX/libexec] |
--datadir=DIR read-only architecture-independent data in DIR |
[PREFIX/share] |
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] |
--sharedstatedir=DIR modifiable architecture-independent data in DIR |
[PREFIX/com] |
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] |
--libdir=DIR object code libraries in DIR [EPREFIX/lib] |
--includedir=DIR C header files in DIR [PREFIX/include] |
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] |
--infodir=DIR info documentation in DIR [PREFIX/info] |
--mandir=DIR man documentation in DIR [PREFIX/man] |
--srcdir=DIR find the sources in DIR [configure dir or ..] |
--program-prefix=PREFIX prepend PREFIX to installed program names |
--program-suffix=SUFFIX append SUFFIX to installed program names |
--program-transform-name=PROGRAM |
run sed PROGRAM on installed program names |
EOF |
cat << EOF |
Host type: |
--build=BUILD configure for building on BUILD [BUILD=HOST] |
--host=HOST configure for HOST [guessed] |
--target=TARGET configure for TARGET [TARGET=HOST] |
Features and packages: |
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
--enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes] |
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) |
--x-includes=DIR X include files are in DIR |
--x-libraries=DIR X library files are in DIR |
EOF |
if test -n "$ac_help"; then |
echo "--enable and --with options recognized:$ac_help" |
fi |
exit 0 ;; |
|
-host | --host | --hos | --ho) |
ac_prev=host ;; |
-host=* | --host=* | --hos=* | --ho=*) |
host="$ac_optarg" ;; |
|
-includedir | --includedir | --includedi | --included | --include \ |
| --includ | --inclu | --incl | --inc) |
ac_prev=includedir ;; |
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| --includ=* | --inclu=* | --incl=* | --inc=*) |
includedir="$ac_optarg" ;; |
|
-infodir | --infodir | --infodi | --infod | --info | --inf) |
ac_prev=infodir ;; |
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
infodir="$ac_optarg" ;; |
|
-libdir | --libdir | --libdi | --libd) |
ac_prev=libdir ;; |
-libdir=* | --libdir=* | --libdi=* | --libd=*) |
libdir="$ac_optarg" ;; |
|
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| --libexe | --libex | --libe) |
ac_prev=libexecdir ;; |
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| --libexe=* | --libex=* | --libe=*) |
libexecdir="$ac_optarg" ;; |
|
-localstatedir | --localstatedir | --localstatedi | --localstated \ |
| --localstate | --localstat | --localsta | --localst \ |
| --locals | --local | --loca | --loc | --lo) |
ac_prev=localstatedir ;; |
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
localstatedir="$ac_optarg" ;; |
|
-mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
ac_prev=mandir ;; |
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
mandir="$ac_optarg" ;; |
|
-nfp | --nfp | --nf) |
# Obsolete; use --without-fp. |
with_fp=no ;; |
|
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) |
no_create=yes ;; |
|
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
no_recursion=yes ;; |
|
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| --oldin | --oldi | --old | --ol | --o) |
ac_prev=oldincludedir ;; |
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
oldincludedir="$ac_optarg" ;; |
|
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
ac_prev=prefix ;; |
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
prefix="$ac_optarg" ;; |
|
-program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| --program-pre | --program-pr | --program-p) |
ac_prev=program_prefix ;; |
-program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
program_prefix="$ac_optarg" ;; |
|
-program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| --program-suf | --program-su | --program-s) |
ac_prev=program_suffix ;; |
-program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
program_suffix="$ac_optarg" ;; |
|
-program-transform-name | --program-transform-name \ |
| --program-transform-nam | --program-transform-na \ |
| --program-transform-n | --program-transform- \ |
| --program-transform | --program-transfor \ |
| --program-transfo | --program-transf \ |
| --program-trans | --program-tran \ |
| --progr-tra | --program-tr | --program-t) |
ac_prev=program_transform_name ;; |
-program-transform-name=* | --program-transform-name=* \ |
| --program-transform-nam=* | --program-transform-na=* \ |
| --program-transform-n=* | --program-transform-=* \ |
| --program-transform=* | --program-transfor=* \ |
| --program-transfo=* | --program-transf=* \ |
| --program-trans=* | --program-tran=* \ |
| --progr-tra=* | --program-tr=* | --program-t=*) |
program_transform_name="$ac_optarg" ;; |
|
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
silent=yes ;; |
|
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
ac_prev=sbindir ;; |
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| --sbi=* | --sb=*) |
sbindir="$ac_optarg" ;; |
|
-sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| --sharedst | --shareds | --shared | --share | --shar \ |
| --sha | --sh) |
ac_prev=sharedstatedir ;; |
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| --sha=* | --sh=*) |
sharedstatedir="$ac_optarg" ;; |
|
-site | --site | --sit) |
ac_prev=site ;; |
-site=* | --site=* | --sit=*) |
site="$ac_optarg" ;; |
|
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
ac_prev=srcdir ;; |
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
srcdir="$ac_optarg" ;; |
|
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| --syscon | --sysco | --sysc | --sys | --sy) |
ac_prev=sysconfdir ;; |
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
sysconfdir="$ac_optarg" ;; |
|
-target | --target | --targe | --targ | --tar | --ta | --t) |
ac_prev=target ;; |
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
target="$ac_optarg" ;; |
|
-v | -verbose | --verbose | --verbos | --verbo | --verb) |
verbose=yes ;; |
|
-version | --version | --versio | --versi | --vers) |
echo "configure generated by autoconf version 2.10" |
exit 0 ;; |
|
-with-* | --with-*) |
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
case "$ac_option" in |
*=*) ;; |
*) ac_optarg=yes ;; |
esac |
eval "with_${ac_package}='$ac_optarg'" ;; |
|
-without-* | --without-*) |
ac_package=`echo $ac_option|sed -e 's/-*without-//'` |
# Reject names that are not valid shell variable names. |
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then |
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } |
fi |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
eval "with_${ac_package}=no" ;; |
|
--x) |
# Obsolete; use --with-x. |
with_x=yes ;; |
|
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| --x-incl | --x-inc | --x-in | --x-i) |
ac_prev=x_includes ;; |
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
x_includes="$ac_optarg" ;; |
|
-x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
ac_prev=x_libraries ;; |
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
x_libraries="$ac_optarg" ;; |
|
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } |
;; |
|
*) |
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then |
echo "configure: warning: $ac_option: invalid host type" 1>&2 |
fi |
if test "x$nonopt" != xNONE; then |
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } |
fi |
nonopt="$ac_option" |
;; |
|
esac |
done |
|
if test -n "$ac_prev"; then |
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } |
fi |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
# File descriptor usage: |
# 0 standard input |
# 1 file creation |
# 2 errors and warnings |
# 3 some systems may open it to /dev/tty |
# 4 used on the Kubota Titan |
# 6 checking for... messages and results |
# 5 compiler messages saved in config.log |
if test "$silent" = yes; then |
exec 6>/dev/null |
else |
exec 6>&1 |
fi |
exec 5>./config.log |
|
echo "\ |
This file contains any messages produced by compilers while |
running configure, to aid debugging if configure makes a mistake. |
" 1>&5 |
|
# Strip out --no-create and --no-recursion so they do not pile up. |
# Also quote any args containing shell metacharacters. |
ac_configure_args= |
for ac_arg |
do |
case "$ac_arg" in |
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c) ;; |
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; |
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) |
ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
*) ac_configure_args="$ac_configure_args $ac_arg" ;; |
esac |
done |
|
# NLS nuisances. |
# Only set LANG and LC_ALL to C if already set. |
# These must not be set unconditionally because not all systems understand |
# e.g. LANG=C (notably SCO). |
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi |
if test "${LANG+set}" = set; then LANG=C; export LANG; fi |
|
# confdefs.h avoids OS command line length limits that DEFS can exceed. |
rm -rf conftest* confdefs.h |
# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
echo > confdefs.h |
|
# A filename unique to this package, relative to the directory that |
# configure is in, which we can look for to find out if srcdir is correct. |
ac_unique_file=aload.c |
|
# Find the source files, if location was not specified. |
if test -z "$srcdir"; then |
ac_srcdir_defaulted=yes |
# Try the directory containing this script, then its parent. |
ac_prog=$0 |
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` |
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. |
srcdir=$ac_confdir |
if test ! -r $srcdir/$ac_unique_file; then |
srcdir=.. |
fi |
else |
ac_srcdir_defaulted=no |
fi |
if test ! -r $srcdir/$ac_unique_file; then |
if test "$ac_srcdir_defaulted" = yes; then |
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } |
else |
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } |
fi |
fi |
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` |
|
# Prefer explicitly selected file to automatically selected ones. |
if test -z "$CONFIG_SITE"; then |
if test "x$prefix" != xNONE; then |
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
else |
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
fi |
fi |
for ac_site_file in $CONFIG_SITE; do |
if test -r "$ac_site_file"; then |
echo "loading site script $ac_site_file" |
. "$ac_site_file" |
fi |
done |
|
if test -r "$cache_file"; then |
echo "loading cache $cache_file" |
. $cache_file |
else |
echo "creating cache $cache_file" |
> $cache_file |
fi |
|
ac_ext=c |
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' |
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' |
|
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then |
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. |
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then |
ac_n= ac_c=' |
' ac_t=' ' |
else |
ac_n=-n ac_c= ac_t= |
fi |
else |
ac_n= ac_c='\c' ac_t= |
fi |
|
|
|
CC=${CC-cc} |
# Extract the first word of "gcc", so it can be a program name with args. |
set dummy gcc; ac_word=$2 |
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" |
for ac_dir in $PATH; do |
test -z "$ac_dir" && ac_dir=. |
if test -f $ac_dir/$ac_word; then |
ac_cv_prog_CC="gcc" |
break |
fi |
done |
IFS="$ac_save_ifs" |
fi |
fi |
CC="$ac_cv_prog_CC" |
if test -n "$CC"; then |
echo "$ac_t""$CC" 1>&6 |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
if test -z "$CC"; then |
# Extract the first word of "cc", so it can be a program name with args. |
set dummy cc; ac_word=$2 |
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" |
ac_prog_rejected=no |
for ac_dir in $PATH; do |
test -z "$ac_dir" && ac_dir=. |
if test -f $ac_dir/$ac_word; then |
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then |
ac_prog_rejected=yes |
continue |
fi |
ac_cv_prog_CC="cc" |
break |
fi |
done |
IFS="$ac_save_ifs" |
if test $ac_prog_rejected = yes; then |
# We found a bogon in the path, so make sure we never use it. |
set dummy $ac_cv_prog_CC |
shift |
if test $# -gt 0; then |
# We chose a different compiler from the bogus one. |
# However, it has the same basename, so the bogon will be chosen |
# first if we set CC to just the basename; use the full file name. |
shift |
set dummy "$ac_dir/$ac_word" "$@" |
shift |
ac_cv_prog_CC="$@" |
fi |
fi |
fi |
fi |
CC="$ac_cv_prog_CC" |
if test -n "$CC"; then |
echo "$ac_t""$CC" 1>&6 |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } |
fi |
|
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
cat > conftest.c <<EOF |
#ifdef __GNUC__ |
yes; |
#endif |
EOF |
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:604: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then |
ac_cv_prog_gcc=yes |
else |
ac_cv_prog_gcc=no |
fi |
fi |
|
echo "$ac_t""$ac_cv_prog_gcc" 1>&6 |
if test $ac_cv_prog_gcc = yes; then |
GCC=yes |
if test "${CFLAGS+set}" != set; then |
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
echo 'void f(){}' > conftest.c |
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then |
ac_cv_prog_gcc_g=yes |
else |
ac_cv_prog_gcc_g=no |
fi |
rm -f conftest* |
|
fi |
|
echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 |
if test $ac_cv_prog_gcc_g = yes; then |
CFLAGS="-g -O" |
else |
CFLAGS="-O" |
fi |
fi |
else |
GCC= |
test "${CFLAGS+set}" = set || CFLAGS="-g" |
fi |
|
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 |
# On Suns, sometimes $CPP names a directory. |
if test -n "$CPP" && test -d "$CPP"; then |
CPP= |
fi |
if test -z "$CPP"; then |
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
# This must be in double quotes, not single quotes, because CPP may get |
# substituted into the Makefile and "${CC-cc}" will confuse make. |
CPP="${CC-cc} -E" |
# On the NeXT, cc -E runs the code through the compiler's parser, |
# not just through cpp. |
cat > conftest.$ac_ext <<EOF |
#line 656 "configure" |
#include "confdefs.h" |
#include <assert.h> |
Syntax Error |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
: |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
CPP="${CC-cc} -E -traditional-cpp" |
cat > conftest.$ac_ext <<EOF |
#line 671 "configure" |
#include "confdefs.h" |
#include <assert.h> |
Syntax Error |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:677: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
: |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
CPP=/lib/cpp |
fi |
rm -f conftest* |
fi |
rm -f conftest* |
ac_cv_prog_CPP="$CPP" |
fi |
CPP="$ac_cv_prog_CPP" |
else |
ac_cv_prog_CPP="$CPP" |
fi |
echo "$ac_t""$CPP" 1>&6 |
|
echo $ac_n "checking for AIX""... $ac_c" 1>&6 |
cat > conftest.$ac_ext <<EOF |
#line 699 "configure" |
#include "confdefs.h" |
#ifdef _AIX |
yes |
#endif |
|
EOF |
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | |
egrep "yes" >/dev/null 2>&1; then |
rm -rf conftest* |
echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF |
#define _ALL_SOURCE 1 |
EOF |
|
else |
rm -rf conftest* |
echo "$ac_t""no" 1>&6 |
fi |
rm -f conftest* |
|
|
ac_safe=`echo "minix/config.h" | tr './\055' '___'` |
echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
cat > conftest.$ac_ext <<EOF |
#line 726 "configure" |
#include "confdefs.h" |
#include <minix/config.h> |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:731: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=yes" |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=no" |
fi |
rm -f conftest* |
fi |
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
MINIX=yes |
else |
echo "$ac_t""no" 1>&6 |
MINIX= |
fi |
|
if test "$MINIX" = yes; then |
cat >> confdefs.h <<\EOF |
#define _POSIX_SOURCE 1 |
EOF |
|
cat >> confdefs.h <<\EOF |
#define _POSIX_1_SOURCE 2 |
EOF |
|
cat >> confdefs.h <<\EOF |
#define _MINIX 1 |
EOF |
|
fi |
|
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 |
if test -d /etc/conf/kconfig.d && |
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 |
then |
echo "$ac_t""yes" 1>&6 |
ISC=yes # If later tests want to check for ISC. |
cat >> confdefs.h <<\EOF |
#define _POSIX_SOURCE 1 |
EOF |
|
if test "$GCC" = yes; then |
CC="$CC -posix" |
else |
CC="$CC -Xp" |
fi |
else |
echo "$ac_t""no" 1>&6 |
ISC= |
fi |
|
|
ac_aux_dir= |
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do |
if test -f $ac_dir/install-sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f $ac_dir/install.sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } |
fi |
ac_config_guess=$ac_aux_dir/config.guess |
ac_config_sub=$ac_aux_dir/config.sub |
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. |
|
# Find a good install program. We prefer a C program (faster), |
# so one script is as good as another. But avoid the broken or |
# incompatible versions: |
# SysV /etc/install, /usr/sbin/install |
# SunOS /usr/etc/install |
# IRIX /sbin/install |
# AIX /bin/install |
# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
# ./install, which can be erroneously created by make from ./install.sh. |
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 |
if test -z "$INSTALL"; then |
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" |
for ac_dir in $PATH; do |
# Account for people who put trailing slashes in PATH elements. |
case "$ac_dir/" in |
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; |
*) |
# OSF1 and SCO ODT 3.0 have their own names for install. |
for ac_prog in ginstall installbsd scoinst install; do |
if test -f $ac_dir/$ac_prog; then |
if test $ac_prog = install && |
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then |
# AIX install. It has an incompatible calling convention. |
# OSF/1 installbsd also uses dspmsg, but is usable. |
: |
else |
ac_cv_path_install="$ac_dir/$ac_prog -c" |
break 2 |
fi |
fi |
done |
;; |
esac |
done |
IFS="$ac_save_ifs" |
|
fi |
if test "${ac_cv_path_install+set}" = set; then |
INSTALL="$ac_cv_path_install" |
else |
# As a last resort, use the slow shell script. We don't cache a |
# path for INSTALL within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the path is relative. |
INSTALL="$ac_install_sh" |
fi |
fi |
echo "$ac_t""$INSTALL" 1>&6 |
|
# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
# It thinks the first close brace ends the variable substitution. |
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
|
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
|
|
ac_aux_dir= |
for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do |
if test -f $ac_dir/install-sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f $ac_dir/install.sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } |
fi |
ac_config_guess=$ac_aux_dir/config.guess |
ac_config_sub=$ac_aux_dir/config.sub |
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. |
|
|
# Do some error checking and defaulting for the host and target type. |
# The inputs are: |
# configure --host=HOST --target=TARGET --build=BUILD NONOPT |
# |
# The rules are: |
# 1. You are not allowed to specify --host, --target, and nonopt at the |
# same time. |
# 2. Host defaults to nonopt. |
# 3. If nonopt is not specified, then host defaults to the current host, |
# as determined by config.guess. |
# 4. Target and build default to nonopt. |
# 5. If nonopt is not specified, then target and build default to host. |
|
# The aliases save the names the user supplied, while $host etc. |
# will get canonicalized. |
case $host---$target---$nonopt in |
NONE---*---* | *---NONE---* | *---*---NONE) ;; |
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; |
esac |
|
|
# Make sure we can run config.sub. |
if $ac_config_sub sun4 >/dev/null 2>&1; then : |
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } |
fi |
|
echo $ac_n "checking host system type""... $ac_c" 1>&6 |
|
host_alias=$host |
case "$host_alias" in |
NONE) |
case $nonopt in |
NONE) |
if host_alias=`$ac_config_guess`; then : |
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } |
fi ;; |
*) host_alias=$nonopt ;; |
esac ;; |
esac |
|
host=`$ac_config_sub $host_alias` |
host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` |
host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` |
host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` |
echo "$ac_t""$host" 1>&6 |
|
echo $ac_n "checking target system type""... $ac_c" 1>&6 |
|
target_alias=$target |
case "$target_alias" in |
NONE) |
case $nonopt in |
NONE) target_alias=$host_alias ;; |
*) target_alias=$nonopt ;; |
esac ;; |
esac |
|
target=`$ac_config_sub $target_alias` |
target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` |
target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` |
target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` |
echo "$ac_t""$target" 1>&6 |
|
echo $ac_n "checking build system type""... $ac_c" 1>&6 |
|
build_alias=$build |
case "$build_alias" in |
NONE) |
case $nonopt in |
NONE) build_alias=$host_alias ;; |
*) build_alias=$nonopt ;; |
esac ;; |
esac |
|
build=`$ac_config_sub $build_alias` |
build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` |
build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` |
build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` |
echo "$ac_t""$build" 1>&6 |
|
test "$host_alias" != "$target_alias" && |
test "$program_prefix$program_suffix$program_transform_name" = \ |
NONENONEs,x,x, && |
program_prefix=${target_alias}- |
|
if test "$program_transform_name" = s,x,x,; then |
program_transform_name= |
else |
# Double any \ or $. echo might interpret backslashes. |
cat <<\EOF_SED > conftestsed |
s,\\,\\\\,g; s,\$,$$,g |
EOF_SED |
program_transform_name="`echo $program_transform_name|sed -f conftestsed`" |
rm -f conftestsed |
fi |
test "$program_prefix" != NONE && |
program_transform_name="s,^,${program_prefix},; $program_transform_name" |
# Use a double $ so make ignores it. |
test "$program_suffix" != NONE && |
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" |
|
# sed with no file args requires a program. |
test "$program_transform_name" = "" && program_transform_name="s,x,x," |
|
|
ac_safe=`echo "termios.h" | tr './\055' '___'` |
echo $ac_n "checking for termios.h""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
cat > conftest.$ac_ext <<EOF |
#line 997 "configure" |
#include "confdefs.h" |
#include <termios.h> |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:1002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=yes" |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=no" |
fi |
rm -f conftest* |
fi |
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
cat >> confdefs.h <<\EOF |
#define HAVE_TERMIOS 1 |
EOF |
termio=termios |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
ac_safe=`echo "termio.h" | tr './\055' '___'` |
echo $ac_n "checking for termio.h""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
cat > conftest.$ac_ext <<EOF |
#line 1030 "configure" |
#include "confdefs.h" |
#include <termio.h> |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:1035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=yes" |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=no" |
fi |
rm -f conftest* |
fi |
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
cat >> confdefs.h <<\EOF |
#define HAVE_TERMIO 1 |
EOF |
termio=termio |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
ac_safe=`echo "sgtty.h" | tr './\055' '___'` |
echo $ac_n "checking for sgtty.h""... $ac_c" 1>&6 |
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
cat > conftest.$ac_ext <<EOF |
#line 1063 "configure" |
#include "confdefs.h" |
#include <sgtty.h> |
EOF |
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" |
{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } |
ac_err=`grep -v '^ *+' conftest.out` |
if test -z "$ac_err"; then |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=yes" |
else |
echo "$ac_err" >&5 |
rm -rf conftest* |
eval "ac_cv_header_$ac_safe=no" |
fi |
rm -f conftest* |
fi |
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
cat >> confdefs.h <<\EOF |
#define HAVE_SGTTY 1 |
EOF |
termio=sgtty |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
|
# disable standalone load programs on DOS/GO32 hosts |
PROGS="aload eload" |
case "${host}" in |
i[3456]86-*-go32*) |
PROGS="" |
;; |
*) |
esac |
|
|
# check for networking libraries. |
NETLIBS= |
echo $ac_n "checking for -lnsl""... $ac_c" 1>&6 |
ac_lib_var=`echo nsl'_'t_accept | tr './+\055' '__p_'` |
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
ac_save_LIBS="$LIBS" |
LIBS="-lnsl $LIBS" |
cat > conftest.$ac_ext <<EOF |
#line 1111 "configure" |
#include "confdefs.h" |
/* Override any gcc2 internal prototype to avoid an error. */ |
/* We use char because int might match the return type of a gcc2 |
builtin and then its argument prototype would still apply. */ |
char t_accept(); |
|
int main() { return 0; } |
int t() { |
t_accept() |
; return 0; } |
EOF |
if { (eval echo configure:1123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then |
rm -rf conftest* |
eval "ac_cv_lib_$ac_lib_var=yes" |
else |
rm -rf conftest* |
eval "ac_cv_lib_$ac_lib_var=no" |
fi |
rm -f conftest* |
LIBS="$ac_save_LIBS" |
|
fi |
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
NETLIBS="$NETLIBS -lnsl" |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
|
# -lsocket is required on some systems, but is broken on IRIX. |
if test "`(uname) 2> /dev/null`" != IRIX; then |
echo $ac_n "checking for -lsocket""... $ac_c" 1>&6 |
ac_lib_var=`echo socket'_'socket | tr './+\055' '__p_'` |
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then |
echo $ac_n "(cached) $ac_c" 1>&6 |
else |
ac_save_LIBS="$LIBS" |
LIBS="-lsocket $LIBS" |
cat > conftest.$ac_ext <<EOF |
#line 1152 "configure" |
#include "confdefs.h" |
/* Override any gcc2 internal prototype to avoid an error. */ |
/* We use char because int might match the return type of a gcc2 |
builtin and then its argument prototype would still apply. */ |
char socket(); |
|
int main() { return 0; } |
int t() { |
socket() |
; return 0; } |
EOF |
if { (eval echo configure:1164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then |
rm -rf conftest* |
eval "ac_cv_lib_$ac_lib_var=yes" |
else |
rm -rf conftest* |
eval "ac_cv_lib_$ac_lib_var=no" |
fi |
rm -f conftest* |
LIBS="$ac_save_LIBS" |
|
fi |
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then |
echo "$ac_t""yes" 1>&6 |
NETLIBS="$NETLIBS -lsocket" |
else |
echo "$ac_t""no" 1>&6 |
fi |
|
fi |
|
|
trap '' 1 2 15 |
cat > confcache <<\EOF |
# This file is a shell script that caches the results of configure |
# tests run on this system so they can be shared between configure |
# scripts and configure runs. It is not useful on other systems. |
# If it contains results you don't want to keep, you may remove or edit it. |
# |
# By default, configure uses ./config.cache as the cache file, |
# creating it if it does not exist already. You can give configure |
# the --cache-file=FILE option to use a different cache file; that is |
# what configure does when it calls configure scripts in |
# subdirectories, so they share the cache. |
# Giving --cache-file=/dev/null disables caching, for debugging configure. |
# config.status only pays attention to the cache file if you give it the |
# --recheck option to rerun configure. |
# |
EOF |
# Ultrix sh set writes to stderr and can't be redirected directly, |
# and sets the high bit in the cache file unless we assign to the vars. |
(set) 2>&1 | |
sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ |
>> confcache |
if cmp -s $cache_file confcache; then |
: |
else |
if test -w $cache_file; then |
echo "updating cache $cache_file" |
cat confcache > $cache_file |
else |
echo "not updating unwritable cache $cache_file" |
fi |
fi |
rm -f confcache |
|
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 |
|
test "x$prefix" = xNONE && prefix=$ac_default_prefix |
# Let make expand exec_prefix. |
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
|
# Any assignment to VPATH causes Sun make to only execute |
# the first set of double-colon rules, so remove it if not needed. |
# If there is a colon in the path, we need to keep it. |
if test "x$srcdir" = x.; then |
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' |
fi |
|
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 |
|
# Transform confdefs.h into DEFS. |
# Protect against shell expansion while executing Makefile rules. |
# Protect against Makefile macro expansion. |
cat > conftest.defs <<\EOF |
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g |
s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g |
s%\[%\\&%g |
s%\]%\\&%g |
s%\$%$$%g |
EOF |
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` |
rm -f conftest.defs |
|
|
# Without the "./", some shells look in PATH for config.status. |
: ${CONFIG_STATUS=./config.status} |
|
echo creating $CONFIG_STATUS |
rm -f $CONFIG_STATUS |
cat > $CONFIG_STATUS <<EOF |
#! /bin/sh |
# Generated automatically by configure. |
# Run this file to recreate the current configuration. |
# This directory was configured as follows, |
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: |
# |
# $0 $ac_configure_args |
# |
# Compiler output produced by configure, useful for debugging |
# configure, is in ./config.log if it exists. |
|
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" |
for ac_option |
do |
case "\$ac_option" in |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" |
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; |
-version | --version | --versio | --versi | --vers | --ver | --ve | --v) |
echo "$CONFIG_STATUS generated by autoconf version 2.10" |
exit 0 ;; |
-help | --help | --hel | --he | --h) |
echo "\$ac_cs_usage"; exit 0 ;; |
*) echo "\$ac_cs_usage"; exit 1 ;; |
esac |
done |
|
ac_given_srcdir=$srcdir |
ac_given_INSTALL="$INSTALL" |
|
trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 |
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
# Protect against being on the right side of a sed subst in config.status. |
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; |
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF |
$ac_vpsub |
$extrasub |
s%@CFLAGS@%$CFLAGS%g |
s%@CPPFLAGS@%$CPPFLAGS%g |
s%@CXXFLAGS@%$CXXFLAGS%g |
s%@DEFS@%$DEFS%g |
s%@LDFLAGS@%$LDFLAGS%g |
s%@LIBS@%$LIBS%g |
s%@exec_prefix@%$exec_prefix%g |
s%@prefix@%$prefix%g |
s%@program_transform_name@%$program_transform_name%g |
s%@bindir@%$bindir%g |
s%@sbindir@%$sbindir%g |
s%@libexecdir@%$libexecdir%g |
s%@datadir@%$datadir%g |
s%@sysconfdir@%$sysconfdir%g |
s%@sharedstatedir@%$sharedstatedir%g |
s%@localstatedir@%$localstatedir%g |
s%@libdir@%$libdir%g |
s%@includedir@%$includedir%g |
s%@oldincludedir@%$oldincludedir%g |
s%@infodir@%$infodir%g |
s%@mandir@%$mandir%g |
s%@CC@%$CC%g |
s%@CPP@%$CPP%g |
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g |
s%@INSTALL_DATA@%$INSTALL_DATA%g |
s%@host@%$host%g |
s%@host_alias@%$host_alias%g |
s%@host_cpu@%$host_cpu%g |
s%@host_vendor@%$host_vendor%g |
s%@host_os@%$host_os%g |
s%@target@%$target%g |
s%@target_alias@%$target_alias%g |
s%@target_cpu@%$target_cpu%g |
s%@target_vendor@%$target_vendor%g |
s%@target_os@%$target_os%g |
s%@build@%$build%g |
s%@build_alias@%$build_alias%g |
s%@build_cpu@%$build_cpu%g |
s%@build_vendor@%$build_vendor%g |
s%@build_os@%$build_os%g |
s%@PROGS@%$PROGS%g |
s%@NETLIBS@%$NETLIBS%g |
|
CEOF |
EOF |
cat >> $CONFIG_STATUS <<EOF |
|
CONFIG_FILES=\${CONFIG_FILES-"Makefile"} |
EOF |
cat >> $CONFIG_STATUS <<\EOF |
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then |
# Support "outfile[:infile]", defaulting infile="outfile.in". |
case "$ac_file" in |
*:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` |
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; |
*) ac_file_in="${ac_file}.in" ;; |
esac |
|
# Adjust relative srcdir, etc. for subdirectories. |
|
# Remove last slash and all that follows it. Not all systems have dirname. |
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` |
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then |
# The file is in a subdirectory. |
test ! -d "$ac_dir" && mkdir "$ac_dir" |
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" |
# A "../" for each directory in $ac_dir_suffix. |
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` |
else |
ac_dir_suffix= ac_dots= |
fi |
|
case "$ac_given_srcdir" in |
.) srcdir=. |
if test -z "$ac_dots"; then top_srcdir=. |
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; |
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; |
*) # Relative path. |
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" |
top_srcdir="$ac_dots$ac_given_srcdir" ;; |
esac |
|
case "$ac_given_INSTALL" in |
[/$]*) INSTALL="$ac_given_INSTALL" ;; |
*) INSTALL="$ac_dots$ac_given_INSTALL" ;; |
esac |
echo creating "$ac_file" |
rm -f "$ac_file" |
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." |
case "$ac_file" in |
*Makefile*) ac_comsub="1i\\ |
# $configure_input" ;; |
*) ac_comsub= ;; |
esac |
sed -e "$ac_comsub |
s%@configure_input@%$configure_input%g |
s%@srcdir@%$srcdir%g |
s%@top_srcdir@%$top_srcdir%g |
s%@INSTALL@%$INSTALL%g |
" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file |
fi; done |
rm -f conftest.subs |
|
|
|
exit 0 |
EOF |
chmod +x $CONFIG_STATUS |
rm -fr confdefs* $ac_clean_files |
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 |
|
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 1765)
@@ -0,0 +1,137 @@
+#Copyright 1989, 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(libdir)/$(target_alias)
+
+datadir = $(prefix)/share
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+
+SHELL = /bin/sh
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC=@CC@
+
+# Directory containing source files.
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+# Where is the "include" directory? Traditionally ../include or ./include
+INCLUDE_DIR = ${srcdir}/../../include
+
+# Where is the "-liberty" library? Typically in ../libiberty.
+LIBIBERTY = ../../libiberty/libiberty.a
+
+# Where is the BFD library? Typically in ../../bfd.
+BFD_DIR = ../../bfd
+BFD = $(BFD_DIR)/libbfd.a
+BFD_SRC = $(srcdir)/$(BFD_DIR)
+BFD_CFLAGS = -I$(BFD_DIR) -I(BFD_SRC)
+
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR)
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = $(CFLAGS) -I$(BFD_DIR) $(INCLUDE_CFLAGS) $(USER_CFLAGS) @DEFS@
+# None of the things in CFLAGS will do any harm, and on some systems
+# (e.g. SunOS4) it is important to use the MH_CFLAGS.
+LDFLAGS = $(CFLAGS)
+
+# Libraries and corresponding dependencies for compiling gdb.
+CLIBS = ${BFD} ${LIBIBERTY}
+CDEPS = ${BFD} ${LIBIBERTY}
+
+# Prevent Sun make from putting in the machine type. Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+ ${CC} -c ${INTERNAL_CFLAGS} $<
+
+PROGS = @PROGS@
+
+.PHONY: all info install install-info
+
+all: $(PROGS)
+
+info:
+
+# This does not use program_transform_name because there only needs to
+# be one aload. Even if aload ends up being useful for more than one
+# target, perhaps one aload binary can be useful with all of them.
+# FIXME: not true, there can be both aout and coff loaders.
+install: $(PROGS)
+ if [ "$(PROGS)" != "" ]; then \
+ for i in $(PROGS) ""; do \
+ $(INSTALL_PROGRAM) $$i $(bindir)/$$i; \
+ done; \
+ fi
+
+install-info:
+
+aload: aload.o
+ $(CC) $(CFLAGS) -o aload aload.o $(CLIBS)
+
+eload: eload.o
+ $(CC) $(CFLAGS) -o eload eload.o $(CLIBS) @NETLIBS@
+
+aload.o: aload.c
+
+eload.o: eload.c
+
+mostlyclean:
+
+clean: mostlyclean
+ rm -f *.o $(PROGS)
+
+distclean: clean
+ rm -f config.log config.cache
+
+maintainer-clean realclean: distclean
+
+Makefile: Makefile.in config.status
+ $(SHELL) config.status
+
+config.status: configure
+ $(SHELL) config.status --recheck
+
Index: eload.c
===================================================================
--- eload.c (nonexistent)
+++ eload.c (revision 1765)
@@ -0,0 +1,451 @@
+/* Program to load an image into the SPARClite monitor board via Ethernet
+ Copyright 1993 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* Call with:
+
+ eload PROG HOSTNAME
+
+(HOSTNAME is the name (or IP address) of your eval board)
+
+ie: eload hello sparky
+
+*/
+
+#include
+
+#include "ansidecl.h"
+
+#ifdef ANSI_PROTOTYPES
+#include
+#else
+#include
+#endif
+
+#include "libiberty.h"
+#include "bfd.h"
+
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define min(A, B) (((A) < (B)) ? (A) : (B))
+
+/* Where the code goes by default. */
+
+#ifndef LOAD_ADDRESS
+#define LOAD_ADDRESS 0x40000000
+#endif
+
+static void
+usage()
+{
+ fprintf (stderr, "usage: eload executable-file network-name\n");
+ exit (1);
+}
+
+static void
+#ifdef ANSI_PROTOTYPES
+sys_error (char *msg, ...)
+#else
+sys_error (va_alist)
+ va_dcl
+#endif
+{
+ int e = errno;
+ va_list args;
+
+#ifdef ANSI_PROTOTYPES
+ va_start (args, msg);
+#else
+ va_start (args);
+#endif
+
+#ifdef ANSI_PROTOTYPES
+ vfprintf (stderr, msg, args);
+#else
+ {
+ char *msg1;
+
+ msg1 = va_arg (args, char *);
+ vfprintf (stderr, msg1, args);
+ }
+#endif
+ va_end (args);
+
+ fprintf (stderr, ": %s\n", strerror(e));
+ exit (1);
+}
+
+static void
+#ifdef ANSI_PROTOTYPES
+error (char *msg, ...)
+#else
+error (va_alist)
+ va_dcl
+#endif
+{
+ va_list args;
+
+#ifdef ANSI_PROTOTYPES
+ va_start (args, msg);
+#else
+ va_start (args);
+#endif
+
+#ifdef ANSI_PROTOTYPES
+ vfprintf (stderr, msg, args);
+#else
+ {
+ char *msg1;
+
+ msg1 = va_arg (args, char *);
+ vfprintf (stderr, msg1, args);
+ }
+#endif
+ va_end (args);
+
+ fputc ('\n', stderr);
+ exit (1);
+}
+
+int netfd;
+
+static int
+recv_buf (fd, buf, len, timeout)
+ int fd, len;
+ unsigned char *buf;
+ int timeout;
+{
+ int cc;
+ fd_set readfds;
+
+ FD_ZERO (&readfds);
+ FD_SET (fd, &readfds);
+
+ if (timeout >= 0)
+ {
+ struct timeval timebuf;
+
+ timebuf.tv_sec = timeout;
+ timebuf.tv_usec = 0;
+ cc = select (fd + 1, &readfds, 0, 0, &timebuf);
+ }
+ else
+ cc = select (fd + 1, &readfds, 0, 0, 0);
+
+ if (cc == 0)
+ return 0;
+
+ if (cc != 1)
+ sys_error ("recv_buf: Bad return value from select:");
+
+ cc = recv (fd, buf, len, 0);
+
+ if (cc < 0)
+ sys_error ("Got an error from recv: ");
+
+ return cc;
+}
+
+static void
+send_buf (fd, buf, len)
+ int fd, len;
+ unsigned char *buf;
+{
+ int cc;
+
+ cc = send (fd, buf, len, 0);
+
+ if (cc == len)
+ return;
+
+ if (cc < 0)
+ sys_error ("Got an error from send: ");
+
+ printf ("Short count in send: tried %d, sent %d\n", len, cc);
+}
+
+static unsigned short
+calc_checksum (buffer, count)
+ unsigned char *buffer;
+ int count;
+{
+ unsigned short checksum;
+ unsigned short *s;
+
+ s = (unsigned short *)buffer;
+
+ checksum = 0;
+ for (; count > 0; count -= 2)
+ checksum += *s++;
+
+ if (count != 0)
+ checksum += (*s & 0xff00);
+
+ return checksum;
+}
+
+static void
+send_data (buffer, fd, addr, count)
+ unsigned char *buffer;
+ int fd;
+ unsigned long addr;
+ int count;
+{
+ int cc, i;
+ static int pkt_num = 0;
+ unsigned char snd_buf[2000];
+ unsigned short checksum;
+ static unsigned long old_addr = -1;
+
+ while (1)
+ {
+ if (addr != old_addr)
+ {
+ snd_buf[0] = 0x1; /* Load command */
+ snd_buf[1] = 0x1; /* Loading address */
+ snd_buf[2] = addr >> 24;
+ snd_buf[3] = addr >> 16;
+ snd_buf[4] = addr >> 8;
+ snd_buf[5] = addr;
+
+ checksum = 0;
+ for (i = 0; i < 6; i++)
+ checksum += snd_buf[i];
+ checksum &= 0xff;
+
+ send_buf (fd, snd_buf, 6);
+ cc = recv_buf (fd, snd_buf, sizeof snd_buf, -1);
+
+ if (cc < 1)
+ {
+ fprintf (stderr, "Got back short checksum for load addr\n");
+ exit (1);
+ }
+
+ if (checksum != snd_buf[0])
+ {
+ fprintf (stderr, "Got back bad checksum for load addr\n");
+ exit (1);
+ }
+ pkt_num = 0; /* Load addr resets packet seq # */
+ old_addr = addr;
+ }
+
+ memcpy (snd_buf + 6, buffer, count);
+
+ checksum = calc_checksum (buffer, count);
+
+ snd_buf[0] = 0x1; /* Load command */
+ snd_buf[1] = 0x2; /* Loading data */
+ snd_buf[2] = pkt_num >> 8;
+ snd_buf[3] = pkt_num;
+ snd_buf[4] = checksum >> 8;
+ snd_buf[5] = checksum;
+
+ send_buf (fd, snd_buf, count + 6);
+ cc = recv_buf (fd, snd_buf, sizeof snd_buf, 3);
+
+ if (cc == 0)
+ {
+ fprintf (stderr
+ , "send_data: timeout sending %d bytes to addr 0x%lx, retrying\n", count, addr);
+ continue;
+ }
+
+ if (cc < 1)
+ {
+ fprintf (stderr, "Got back short response for load data\n");
+ exit (1);
+ }
+
+ if (snd_buf[0] != 0xff)
+ {
+ fprintf (stderr, "Got back bad response for load data\n");
+ exit (1);
+ }
+
+ old_addr += count;
+ pkt_num++;
+
+ return;
+ }
+}
+
+extern int optind;
+
+int
+main (argc, argv)
+ int argc;
+ char **argv;
+{
+ int cc, c;
+ unsigned char buf[10];
+ asection *section;
+ bfd *pbfd;
+ unsigned long entry;
+ struct hostent *he;
+ struct sockaddr_in sockaddr;
+
+ while ((c = getopt(argc, argv, "")) != EOF)
+ {
+ switch (c)
+ {
+ default:
+ usage();
+ }
+ }
+ argc -= optind;
+ argv += optind;
+
+ if (argc != 2)
+ usage ();
+
+ pbfd = bfd_openr (argv[1], 0);
+
+ if (pbfd == NULL)
+ sys_error ("Open of PROG failed");
+
+ /* Setup the socket. Must be raw UDP. */
+
+ he = gethostbyname (argv[2]);
+
+ if (!he)
+ sys_error ("No such host");
+
+ netfd = socket (PF_INET, SOCK_DGRAM, 0);
+
+ sockaddr.sin_family = PF_INET;
+ sockaddr.sin_port = htons(7000);
+ memcpy (&sockaddr.sin_addr.s_addr, he->h_addr, sizeof (struct in_addr));
+
+ if (connect (netfd, &sockaddr, sizeof(sockaddr)))
+ sys_error ("Connect failed");
+
+ buf[0] = 0x5;
+ buf[1] = 0;
+
+ send_buf (netfd, buf, 2); /* Request version */
+ cc = recv_buf (netfd, buf, sizeof(buf), -1); /* Get response */
+
+ if (cc < 3)
+ {
+ fprintf (stderr, "SPARClite appears to be ill\n");
+ exit (1);
+ }
+
+ printf ("[SPARClite appears to be alive]\n");
+
+ if (!bfd_check_format (pbfd, bfd_object))
+ error ("It doesn't seem to be an object file");
+
+ for (section = pbfd->sections; section; section = section->next)
+ {
+ if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC)
+ {
+ bfd_vma section_address;
+ unsigned long section_size;
+ const char *section_name;
+
+ section_name = bfd_get_section_name (pbfd, section);
+
+ section_address = bfd_get_section_vma (pbfd, section);
+ /* Adjust sections from a.out files, since they don't
+ carry their addresses with. */
+ if (bfd_get_flavour (pbfd) == bfd_target_aout_flavour)
+ section_address += LOAD_ADDRESS;
+ section_size = bfd_section_size (pbfd, section);
+
+ printf("[Loading section %s at %lx (%ld bytes)]\n",
+ section_name, section_address, section_size);
+
+ /* Text, data or lit */
+ if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
+ {
+ file_ptr fptr;
+
+ fptr = 0;
+
+ while (section_size > 0)
+ {
+ char buffer[1024];
+ int count;
+ static char inds[] = "|/-\\";
+ static int k = 0;
+
+ count = min (section_size, 1024);
+
+ bfd_get_section_contents (pbfd, section, buffer, fptr,
+ count);
+
+#if 0
+ {
+ int i;
+ unsigned char checksum;
+
+ checksum = 0;
+ for (i=0; i < count; i++)
+ checksum += buffer[i];
+ }
+#endif
+
+ printf ("\r%c", inds[k++ % 4]);
+ fflush (stdout);
+
+ send_data (buffer, netfd, section_address, count);
+
+ section_address += count;
+ fptr += count;
+ section_size -= count;
+ }
+ }
+ else /* BSS */
+ printf ("Not loading BSS \n");
+ }
+ }
+
+ entry = bfd_get_start_address (pbfd);
+
+ printf ("[Starting %s at 0x%lx]\n", argv[1], entry);
+
+ buf[0] = 0x3;
+ buf[1] = 0;
+ buf[2] = entry >> 24;
+ buf[3] = entry >> 16;
+ buf[4] = entry >> 8;
+ buf[5] = entry;
+
+ send_buf (netfd, buf, 6); /* Send start addr */
+ cc = recv_buf (netfd, buf, sizeof(buf), -1); /* Get response */
+
+ if (cc < 1 || buf[0] != 0x55)
+ {
+ fprintf (stderr, "Failed to take start address\n");
+ exit (1);
+ }
+
+ exit (0);
+}
Index: configure.in
===================================================================
--- configure.in (nonexistent)
+++ configure.in (revision 1765)
@@ -0,0 +1,43 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.3)dnl
+AC_INIT(aload.c)
+
+CC=${CC-cc}
+AC_PROG_CC
+AC_AIX
+AC_MINIX
+AC_ISC_POSIX
+
+AC_PROG_INSTALL
+
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+AC_CHECK_HEADER(termios.h, AC_DEFINE(HAVE_TERMIOS) termio=termios)
+AC_CHECK_HEADER(termio.h, AC_DEFINE(HAVE_TERMIO) termio=termio)
+AC_CHECK_HEADER(sgtty.h, AC_DEFINE(HAVE_SGTTY) termio=sgtty)
+
+# disable standalone load programs on DOS/GO32 hosts
+changequote(,)dnl
+PROGS="aload eload"
+case "${host}" in
+i[3456]86-*-go32*)
+ PROGS=""
+ ;;
+*)
+esac
+changequote([,])dnl
+AC_SUBST(PROGS)
+
+# check for networking libraries.
+NETLIBS=
+AC_CHECK_LIB(nsl, t_accept, [NETLIBS="$NETLIBS -lnsl"])
+
+# -lsocket is required on some systems, but is broken on IRIX.
+if test "`(uname) 2> /dev/null`" != IRIX; then
+ AC_CHECK_LIB(socket, socket, [NETLIBS="$NETLIBS -lsocket"])
+fi
+AC_SUBST(NETLIBS)
+
+AC_OUTPUT(Makefile)
Index: ChangeLog
===================================================================
--- ChangeLog (nonexistent)
+++ ChangeLog (revision 1765)
@@ -0,0 +1,20 @@
+Thu Aug 29 17:09:04 1996 Michael Meissner
+
+ * configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
+ * configure: Regenerate.
+
+Tue Jun 25 23:19:17 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (datadir): Set to $(prefix)/share.
+ (docdir): Removed.
+
+Wed Sep 20 13:45:22 1995 Ian Lance Taylor
+
+ * Makefile.in (maintainer-clean): New synonym for realclean.
+
+Sat Jul 29 15:08:43 1995 Stan Shebs
+
+ * configure.in, Makefile.in, aload.c, eload.c, README: Move
+ here from gdb/sparclite, update configure and make bits,
+ update code to compile with both GCC and other compilers.
+ * aload: Remove, contents all obsolete.
Index: config.status
===================================================================
--- config.status (nonexistent)
+++ config.status (revision 1765)
@@ -0,0 +1,139 @@
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host sourceware.org:
+#
+# .././sparclite/configure --host=sun4 --target=sun4 --cache-file=../config.cache --cache-file=../../config.cache
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running ${CONFIG_SHELL-/bin/sh} .././sparclite/configure --host=sun4 --target=sun4 --cache-file=../config.cache --cache-file=../../config.cache --no-create --no-recursion"
+ exec ${CONFIG_SHELL-/bin/sh} .././sparclite/configure --host=sun4 --target=sun4 --cache-file=../config.cache --cache-file=../../config.cache --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "./config.status generated by autoconf version 2.10"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "$ac_cs_usage"; exit 0 ;;
+ *) echo "$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=.././sparclite
+ac_given_INSTALL="/bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c"
+
+trap 'rm -fr Makefile conftest*; exit 1' 1 2 15
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
+
+
+s%@CFLAGS@%-g -O2%g
+s%@CPPFLAGS@%%g
+s%@CXXFLAGS@%-g -O2%g
+s%@DEFS@% -DHAVE_TERMIOS=1 -DHAVE_TERMIO=1 -DHAVE_SGTTY=1 %g
+s%@LDFLAGS@%%g
+s%@LIBS@%%g
+s%@exec_prefix@%${prefix}%g
+s%@prefix@%/usr/local%g
+s%@program_transform_name@%s,x,x,%g
+s%@bindir@%${exec_prefix}/bin%g
+s%@sbindir@%${exec_prefix}/sbin%g
+s%@libexecdir@%${exec_prefix}/libexec%g
+s%@datadir@%${prefix}/share%g
+s%@sysconfdir@%${prefix}/etc%g
+s%@sharedstatedir@%${prefix}/com%g
+s%@localstatedir@%${prefix}/var%g
+s%@libdir@%${exec_prefix}/lib%g
+s%@includedir@%${prefix}/include%g
+s%@oldincludedir@%/usr/include%g
+s%@infodir@%${prefix}/info%g
+s%@mandir@%${prefix}/man%g
+s%@CC@%gcc%g
+s%@CPP@%gcc -E%g
+s%@INSTALL_PROGRAM@%/bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c %g
+s%@INSTALL_DATA@%/bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c -m 644%g
+s%@host@%sparc-sun-sunos4.1.1%g
+s%@host_alias@%sun4%g
+s%@host_cpu@%sparc%g
+s%@host_vendor@%sun%g
+s%@host_os@%sunos4.1.1%g
+s%@target@%sparc-sun-sunos4.1.1%g
+s%@target_alias@%sun4%g
+s%@target_cpu@%sparc%g
+s%@target_vendor@%sun%g
+s%@target_os@%sunos4.1.1%g
+s%@build@%sparc-sun-sunos4.1.1%g
+s%@build_alias@%sun4%g
+s%@build_cpu@%sparc%g
+s%@build_vendor@%sun%g
+s%@build_os@%sunos4.1.1%g
+s%@PROGS@%aload eload%g
+s%@NETLIBS@%%g
+
+CEOF
+
+CONFIG_FILES=${CONFIG_FILES-"Makefile"}
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust relative srcdir, etc. for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+fi; done
+rm -f conftest.subs
+
+
+
+exit 0
config.status
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile
===================================================================
--- Makefile (nonexistent)
+++ Makefile (revision 1765)
@@ -0,0 +1,138 @@
+# Generated automatically from Makefile.in by configure.
+#Copyright 1989, 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+
+host_alias = sun4
+target_alias = sun4
+program_transform_name = s,x,x,
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(libdir)/$(target_alias)
+
+datadir = $(prefix)/share
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+
+SHELL = /bin/sh
+
+INSTALL = /bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c
+INSTALL_PROGRAM = /bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c
+INSTALL_DATA = /bin/sh /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_3-branch/5.3/gdb/src/install-sh -c -m 644
+
+CC=gcc
+
+# Directory containing source files.
+srcdir = .././sparclite
+VPATH = .././sparclite
+
+# Where is the "include" directory? Traditionally ../include or ./include
+INCLUDE_DIR = ${srcdir}/../../include
+
+# Where is the "-liberty" library? Typically in ../libiberty.
+LIBIBERTY = ../../libiberty/libiberty.a
+
+# Where is the BFD library? Typically in ../../bfd.
+BFD_DIR = ../../bfd
+BFD = $(BFD_DIR)/libbfd.a
+BFD_SRC = $(srcdir)/$(BFD_DIR)
+BFD_CFLAGS = -I$(BFD_DIR) -I(BFD_SRC)
+
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR)
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = $(CFLAGS) -I$(BFD_DIR) $(INCLUDE_CFLAGS) $(USER_CFLAGS) -DHAVE_TERMIOS=1 -DHAVE_TERMIO=1 -DHAVE_SGTTY=1
+# None of the things in CFLAGS will do any harm, and on some systems
+# (e.g. SunOS4) it is important to use the MH_CFLAGS.
+LDFLAGS = $(CFLAGS)
+
+# Libraries and corresponding dependencies for compiling gdb.
+CLIBS = ${BFD} ${LIBIBERTY}
+CDEPS = ${BFD} ${LIBIBERTY}
+
+# Prevent Sun make from putting in the machine type. Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+ ${CC} -c ${INTERNAL_CFLAGS} $<
+
+PROGS = aload eload
+
+.PHONY: all info install install-info
+
+all: $(PROGS)
+
+info:
+
+# This does not use program_transform_name because there only needs to
+# be one aload. Even if aload ends up being useful for more than one
+# target, perhaps one aload binary can be useful with all of them.
+# FIXME: not true, there can be both aout and coff loaders.
+install: $(PROGS)
+ if [ "$(PROGS)" != "" ]; then \
+ for i in $(PROGS) ""; do \
+ $(INSTALL_PROGRAM) $$i $(bindir)/$$i; \
+ done; \
+ fi
+
+install-info:
+
+aload: aload.o
+ $(CC) $(CFLAGS) -o aload aload.o $(CLIBS)
+
+eload: eload.o
+ $(CC) $(CFLAGS) -o eload eload.o $(CLIBS)
+
+aload.o: aload.c
+
+eload.o: eload.c
+
+mostlyclean:
+
+clean: mostlyclean
+ rm -f *.o $(PROGS)
+
+distclean: clean
+ rm -f config.log config.cache
+
+maintainer-clean realclean: distclean
+
+Makefile: Makefile.in config.status
+ $(SHELL) config.status
+
+config.status: configure
+ $(SHELL) config.status --recheck
+
Index: README
===================================================================
--- README (nonexistent)
+++ README (revision 1765)
@@ -0,0 +1,10 @@
+This directory contains minimal loader utilities that talk to Fujitsu's
+boot monitor.
+
+aload: Download using a serial line.
+ Syntax is "aload ", where is the
+ serial port, such as /dev/ttya.
+
+eload: Download using Ethernet.
+ Syntax is "eload ", where is a host name
+ or IP address.