URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/linux/linux-2.4/net/8021q
- from Rev 1275 to Rev 1765
- ↔ Reverse comparison
Rev 1275 → Rev 1765
/vlan_dev.c
0,0 → 1,900
/* -*- linux-c -*- |
* INET 802.1Q VLAN |
* Ethernet-type device handling. |
* |
* Authors: Ben Greear <greearb@candelatech.com> |
* Please send support related email to: vlan@scry.wanfear.com |
* VLAN Home Page: http://www.candelatech.com/~greear/vlan.html |
* |
* Fixes: Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com> |
* - reset skb->pkt_type on incoming packets when MAC was changed |
* - see that changed MAC is saddr for outgoing packets |
* Oct 20, 2001: Ard van Breeman: |
* - Fix MC-list, finally. |
* - Flush MC-list on VLAN destroy. |
* |
* |
* This program is free software; you can redistribute it and/or |
* modify it under the terms of the GNU General Public License |
* as published by the Free Software Foundation; either version |
* 2 of the License, or (at your option) any later version. |
*/ |
|
#include <linux/module.h> |
#include <linux/mm.h> |
#include <linux/in.h> |
#include <linux/init.h> |
#include <asm/uaccess.h> /* for copy_from_user */ |
#include <linux/skbuff.h> |
#include <linux/netdevice.h> |
#include <linux/etherdevice.h> |
#include <net/datalink.h> |
#include <net/p8022.h> |
#include <net/arp.h> |
#include <linux/brlock.h> |
|
#include "vlan.h" |
#include "vlanproc.h" |
#include <linux/if_vlan.h> |
#include <net/ip.h> |
|
/* |
* Rebuild the Ethernet MAC header. This is called after an ARP |
* (or in future other address resolution) has completed on this |
* sk_buff. We now let ARP fill in the other fields. |
* |
* This routine CANNOT use cached dst->neigh! |
* Really, it is used only when dst->neigh is wrong. |
* |
* TODO: This needs a checkup, I'm ignorant here. --BLG |
*/ |
int vlan_dev_rebuild_header(struct sk_buff *skb) |
{ |
struct net_device *dev = skb->dev; |
struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); |
|
switch (veth->h_vlan_encapsulated_proto) { |
#ifdef CONFIG_INET |
case __constant_htons(ETH_P_IP): |
|
/* TODO: Confirm this will work with VLAN headers... */ |
return arp_find(veth->h_dest, skb); |
#endif |
default: |
printk(VLAN_DBG |
"%s: unable to resolve type %X addresses.\n", |
dev->name, (int)veth->h_vlan_encapsulated_proto); |
|
memcpy(veth->h_source, dev->dev_addr, ETH_ALEN); |
break; |
}; |
|
return 0; |
} |
|
static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb) |
{ |
if (VLAN_DEV_INFO(skb->dev)->flags & 1) { |
if (skb_shared(skb) || skb_cloned(skb)) { |
struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC); |
kfree_skb(skb); |
skb = nskb; |
} |
if (skb) { |
/* Lifted from Gleb's VLAN code... */ |
memmove(skb->data - ETH_HLEN, |
skb->data - VLAN_ETH_HLEN, 12); |
skb->mac.raw += VLAN_HLEN; |
} |
} |
|
return skb; |
} |
|
/* |
* Determine the packet's protocol ID. The rule here is that we |
* assume 802.3 if the type field is short enough to be a length. |
* This is normal practice and works for any 'now in use' protocol. |
* |
* Also, at this point we assume that we ARE dealing exclusively with |
* VLAN packets, or packets that should be made into VLAN packets based |
* on a default VLAN ID. |
* |
* NOTE: Should be similar to ethernet/eth.c. |
* |
* SANITY NOTE: This method is called when a packet is moving up the stack |
* towards userland. To get here, it would have already passed |
* through the ethernet/eth.c eth_type_trans() method. |
* SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be |
* stored UNALIGNED in the memory. RISC systems don't like |
* such cases very much... |
* SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be aligned, |
* so there doesn't need to be any of the unaligned stuff. It has |
* been commented out now... --Ben |
* |
*/ |
int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, |
struct packet_type* ptype) |
{ |
unsigned char *rawp = NULL; |
struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data); |
unsigned short vid; |
struct net_device_stats *stats; |
unsigned short vlan_TCI; |
unsigned short proto; |
|
/* vlan_TCI = ntohs(get_unaligned(&vhdr->h_vlan_TCI)); */ |
vlan_TCI = ntohs(vhdr->h_vlan_TCI); |
|
vid = (vlan_TCI & VLAN_VID_MASK); |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: skb: %p vlan_id: %hx\n", |
__FUNCTION__, skb, vid); |
#endif |
|
/* Ok, we will find the correct VLAN device, strip the header, |
* and then go on as usual. |
*/ |
|
/* We have 12 bits of vlan ID. |
* |
* We must not drop the vlan_group_lock until we hold a |
* reference to the device (netif_rx does that) or we |
* fail. |
*/ |
|
spin_lock_bh(&vlan_group_lock); |
skb->dev = __find_vlan_dev(dev, vid); |
if (!skb->dev) { |
spin_unlock_bh(&vlan_group_lock); |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: ERROR: No net_device for VID: %i on dev: %s [%i]\n", |
__FUNCTION__, (unsigned int)(vid), dev->name, dev->ifindex); |
#endif |
kfree_skb(skb); |
return -1; |
} |
|
skb->dev->last_rx = jiffies; |
|
/* Bump the rx counters for the VLAN device. */ |
stats = vlan_dev_get_stats(skb->dev); |
stats->rx_packets++; |
stats->rx_bytes += skb->len; |
|
skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */ |
|
/* Ok, lets check to make sure the device (dev) we |
* came in on is what this VLAN is attached to. |
*/ |
|
if (dev != VLAN_DEV_INFO(skb->dev)->real_dev) { |
spin_unlock_bh(&vlan_group_lock); |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s real_dev: %s, skb_dev: %s\n", |
__FUNCTION__, skb, dev->name, |
VLAN_DEV_INFO(skb->dev)->real_dev->name, |
skb->dev->name); |
#endif |
kfree_skb(skb); |
stats->rx_errors++; |
return -1; |
} |
|
/* |
* Deal with ingress priority mapping. |
*/ |
skb->priority = vlan_get_ingress_priority(skb->dev, ntohs(vhdr->h_vlan_TCI)); |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: priority: %lu for TCI: %hu (hbo)\n", |
__FUNCTION__, (unsigned long)(skb->priority), |
ntohs(vhdr->h_vlan_TCI)); |
#endif |
|
/* The ethernet driver already did the pkt_type calculations |
* for us... |
*/ |
switch (skb->pkt_type) { |
case PACKET_BROADCAST: /* Yeah, stats collect these together.. */ |
// stats->broadcast ++; // no such counter :-( |
break; |
|
case PACKET_MULTICAST: |
stats->multicast++; |
break; |
|
case PACKET_OTHERHOST: |
/* Our lower layer thinks this is not local, let's make sure. |
* This allows the VLAN to have a different MAC than the underlying |
* device, and still route correctly. |
*/ |
if (memcmp(skb->mac.ethernet->h_dest, skb->dev->dev_addr, ETH_ALEN) == 0) { |
/* It is for our (changed) MAC-address! */ |
skb->pkt_type = PACKET_HOST; |
} |
break; |
default: |
break; |
}; |
|
/* Was a VLAN packet, grab the encapsulated protocol, which the layer |
* three protocols care about. |
*/ |
/* proto = get_unaligned(&vhdr->h_vlan_encapsulated_proto); */ |
proto = vhdr->h_vlan_encapsulated_proto; |
|
skb->protocol = proto; |
if (ntohs(proto) >= 1536) { |
/* place it back on the queue to be handled by |
* true layer 3 protocols. |
*/ |
|
/* See if we are configured to re-write the VLAN header |
* to make it look like ethernet... |
*/ |
skb = vlan_check_reorder_header(skb); |
|
/* Can be null if skb-clone fails when re-ordering */ |
if (skb) { |
netif_rx(skb); |
} else { |
/* TODO: Add a more specific counter here. */ |
stats->rx_errors++; |
} |
spin_unlock_bh(&vlan_group_lock); |
return 0; |
} |
|
rawp = skb->data; |
|
/* |
* This is a magic hack to spot IPX packets. Older Novell breaks |
* the protocol design and runs IPX over 802.3 without an 802.2 LLC |
* layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This |
* won't work for fault tolerant netware but does for the rest. |
*/ |
if (*(unsigned short *)rawp == 0xFFFF) { |
skb->protocol = __constant_htons(ETH_P_802_3); |
/* place it back on the queue to be handled by true layer 3 protocols. |
*/ |
|
/* See if we are configured to re-write the VLAN header |
* to make it look like ethernet... |
*/ |
skb = vlan_check_reorder_header(skb); |
|
/* Can be null if skb-clone fails when re-ordering */ |
if (skb) { |
netif_rx(skb); |
} else { |
/* TODO: Add a more specific counter here. */ |
stats->rx_errors++; |
} |
spin_unlock_bh(&vlan_group_lock); |
return 0; |
} |
|
/* |
* Real 802.2 LLC |
*/ |
skb->protocol = __constant_htons(ETH_P_802_2); |
/* place it back on the queue to be handled by upper layer protocols. |
*/ |
|
/* See if we are configured to re-write the VLAN header |
* to make it look like ethernet... |
*/ |
skb = vlan_check_reorder_header(skb); |
|
/* Can be null if skb-clone fails when re-ordering */ |
if (skb) { |
netif_rx(skb); |
} else { |
/* TODO: Add a more specific counter here. */ |
stats->rx_errors++; |
} |
spin_unlock_bh(&vlan_group_lock); |
return 0; |
} |
|
static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev, |
struct sk_buff* skb) |
{ |
struct vlan_priority_tci_mapping *mp = |
VLAN_DEV_INFO(dev)->egress_priority_map[(skb->priority & 0xF)]; |
|
while (mp) { |
if (mp->priority == skb->priority) { |
return mp->vlan_qos; /* This should already be shifted to mask |
* correctly with the VLAN's TCI |
*/ |
} |
mp = mp->next; |
} |
return 0; |
} |
|
/* |
* Create the VLAN header for an arbitrary protocol layer |
* |
* saddr=NULL means use device source address |
* daddr=NULL means leave destination address (eg unresolved arp) |
* |
* This is called when the SKB is moving down the stack towards the |
* physical devices. |
*/ |
int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev, |
unsigned short type, void *daddr, void *saddr, |
unsigned len) |
{ |
struct vlan_hdr *vhdr; |
unsigned short veth_TCI = 0; |
int rc = 0; |
int build_vlan_header = 0; |
struct net_device *vdev = dev; /* save this for the bottom of the method */ |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: skb: %p type: %hx len: %x vlan_id: %hx, daddr: %p\n", |
__FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr); |
#endif |
|
/* build vlan header only if re_order_header flag is NOT set. This |
* fixes some programs that get confused when they see a VLAN device |
* sending a frame that is VLAN encoded (the consensus is that the VLAN |
* device should look completely like an Ethernet device when the |
* REORDER_HEADER flag is set) The drawback to this is some extra |
* header shuffling in the hard_start_xmit. Users can turn off this |
* REORDER behaviour with the vconfig tool. |
*/ |
build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0); |
|
if (build_vlan_header) { |
vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN); |
|
/* build the four bytes that make this a VLAN header. */ |
|
/* Now, construct the second two bytes. This field looks something |
* like: |
* usr_priority: 3 bits (high bits) |
* CFI 1 bit |
* VLAN ID 12 bits (low bits) |
* |
*/ |
veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; |
veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); |
|
vhdr->h_vlan_TCI = htons(veth_TCI); |
|
/* |
* Set the protocol type. |
* For a packet of type ETH_P_802_3 we put the length in here instead. |
* It is up to the 802.2 layer to carry protocol information. |
*/ |
|
if (type != ETH_P_802_3) { |
vhdr->h_vlan_encapsulated_proto = htons(type); |
} else { |
vhdr->h_vlan_encapsulated_proto = htons(len); |
} |
} |
|
/* Before delegating work to the lower layer, enter our MAC-address */ |
if (saddr == NULL) |
saddr = dev->dev_addr; |
|
dev = VLAN_DEV_INFO(dev)->real_dev; |
|
/* MPLS can send us skbuffs w/out enough space. This check will grow the |
* skb if it doesn't have enough headroom. Not a beautiful solution, so |
* I'll tick a counter so that users can know it's happening... If they |
* care... |
*/ |
|
/* NOTE: This may still break if the underlying device is not the final |
* device (and thus there are more headers to add...) It should work for |
* good-ole-ethernet though. |
*/ |
if (skb_headroom(skb) < dev->hard_header_len) { |
struct sk_buff *sk_tmp = skb; |
skb = skb_realloc_headroom(sk_tmp, dev->hard_header_len); |
kfree_skb(sk_tmp); |
if (skb == NULL) { |
struct net_device_stats *stats = vlan_dev_get_stats(vdev); |
stats->tx_dropped++; |
return -ENOMEM; |
} |
VLAN_DEV_INFO(vdev)->cnt_inc_headroom_on_tx++; |
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name); |
#endif |
} |
|
if (build_vlan_header) { |
/* Now make the underlying real hard header */ |
rc = dev->hard_header(skb, dev, ETH_P_8021Q, daddr, saddr, len + VLAN_HLEN); |
|
if (rc > 0) { |
rc += VLAN_HLEN; |
} else if (rc < 0) { |
rc -= VLAN_HLEN; |
} |
} else { |
/* If here, then we'll just make a normal looking ethernet frame, |
* but, the hard_start_xmit method will insert the tag (it has to |
* be able to do this for bridged and other skbs that don't come |
* down the protocol stack in an orderly manner. |
*/ |
rc = dev->hard_header(skb, dev, type, daddr, saddr, len); |
} |
|
return rc; |
} |
|
int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
{ |
struct net_device_stats *stats = vlan_dev_get_stats(dev); |
struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); |
|
/* Handle non-VLAN frames if they are sent to us, for example by DHCP. |
* |
* NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING |
* OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs... |
*/ |
|
if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) { |
int orig_headroom = skb_headroom(skb); |
unsigned short veth_TCI; |
|
/* This is not a VLAN frame...but we can fix that! */ |
VLAN_DEV_INFO(dev)->cnt_encap_on_xmit++; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: proto to encap: 0x%hx (hbo)\n", |
__FUNCTION__, htons(veth->h_vlan_proto)); |
#endif |
/* Construct the second two bytes. This field looks something |
* like: |
* usr_priority: 3 bits (high bits) |
* CFI 1 bit |
* VLAN ID 12 bits (low bits) |
*/ |
veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; |
veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); |
|
skb = __vlan_put_tag(skb, veth_TCI); |
if (!skb) { |
stats->tx_dropped++; |
return 0; |
} |
|
if (orig_headroom < VLAN_HLEN) { |
VLAN_DEV_INFO(dev)->cnt_inc_headroom_on_tx++; |
} |
} |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: about to send skb: %p to dev: %s\n", |
__FUNCTION__, skb, skb->dev->name); |
printk(VLAN_DBG " %2hx.%2hx.%2hx.%2xh.%2hx.%2hx %2hx.%2hx.%2hx.%2hx.%2hx.%2hx %4hx %4hx %4hx\n", |
veth->h_dest[0], veth->h_dest[1], veth->h_dest[2], veth->h_dest[3], veth->h_dest[4], veth->h_dest[5], |
veth->h_source[0], veth->h_source[1], veth->h_source[2], veth->h_source[3], veth->h_source[4], veth->h_source[5], |
veth->h_vlan_proto, veth->h_vlan_TCI, veth->h_vlan_encapsulated_proto); |
#endif |
|
stats->tx_packets++; /* for statics only */ |
stats->tx_bytes += skb->len; |
|
skb->dev = VLAN_DEV_INFO(dev)->real_dev; |
dev_queue_xmit(skb); |
|
return 0; |
} |
|
int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
{ |
struct net_device_stats *stats = vlan_dev_get_stats(dev); |
unsigned short veth_TCI; |
|
/* Construct the second two bytes. This field looks something |
* like: |
* usr_priority: 3 bits (high bits) |
* CFI 1 bit |
* VLAN ID 12 bits (low bits) |
*/ |
veth_TCI = VLAN_DEV_INFO(dev)->vlan_id; |
veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb); |
skb = __vlan_hwaccel_put_tag(skb, veth_TCI); |
|
stats->tx_packets++; |
stats->tx_bytes += skb->len; |
|
skb->dev = VLAN_DEV_INFO(dev)->real_dev; |
dev_queue_xmit(skb); |
|
return 0; |
} |
|
int vlan_dev_change_mtu(struct net_device *dev, int new_mtu) |
{ |
/* TODO: gotta make sure the underlying layer can handle it, |
* maybe an IFF_VLAN_CAPABLE flag for devices? |
*/ |
if (VLAN_DEV_INFO(dev)->real_dev->mtu < new_mtu) |
return -ERANGE; |
|
dev->mtu = new_mtu; |
|
return new_mtu; |
} |
|
int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio) |
{ |
struct net_device *dev = dev_get_by_name(dev_name); |
|
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
/* see if a priority mapping exists.. */ |
VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio; |
dev_put(dev); |
return 0; |
} |
|
dev_put(dev); |
} |
return -EINVAL; |
} |
|
int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio) |
{ |
struct net_device *dev = dev_get_by_name(dev_name); |
struct vlan_priority_tci_mapping *mp = NULL; |
struct vlan_priority_tci_mapping *np; |
|
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
/* See if a priority mapping exists.. */ |
mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF]; |
while (mp) { |
if (mp->priority == skb_prio) { |
mp->vlan_qos = ((vlan_prio << 13) & 0xE000); |
dev_put(dev); |
return 0; |
} |
mp = mp->next; |
} |
|
/* Create a new mapping then. */ |
mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF]; |
np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL); |
if (np) { |
np->next = mp; |
np->priority = skb_prio; |
np->vlan_qos = ((vlan_prio << 13) & 0xE000); |
VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np; |
dev_put(dev); |
return 0; |
} else { |
dev_put(dev); |
return -ENOBUFS; |
} |
} |
dev_put(dev); |
} |
return -EINVAL; |
} |
|
/* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */ |
int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val) |
{ |
struct net_device *dev = dev_get_by_name(dev_name); |
|
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
/* verify flag is supported */ |
if (flag == 1) { |
if (flag_val) { |
VLAN_DEV_INFO(dev)->flags |= 1; |
} else { |
VLAN_DEV_INFO(dev)->flags &= ~1; |
} |
dev_put(dev); |
return 0; |
} else { |
printk(KERN_ERR "%s: flag %i is not valid.\n", |
__FUNCTION__, (int)(flag)); |
dev_put(dev); |
return -EINVAL; |
} |
} else { |
printk(KERN_ERR |
"%s: %s is not a vlan device, priv_flags: %hX.\n", |
__FUNCTION__, dev->name, dev->priv_flags); |
dev_put(dev); |
} |
} else { |
printk(KERN_ERR "%s: Could not find device: %s\n", |
__FUNCTION__, dev_name); |
} |
|
return -EINVAL; |
} |
|
|
int vlan_dev_get_realdev_name(const char *dev_name, char* result) |
{ |
struct net_device *dev = dev_get_by_name(dev_name); |
int rv = 0; |
|
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23); |
dev_put(dev); |
rv = 0; |
} else { |
/*printk(KERN_ERR |
"%s: %s is not a vlan device, priv_flags: %hX.\n", |
__FUNCTION__, dev->name, dev->priv_flags);*/ |
dev_put(dev); |
rv = -EINVAL; |
} |
} else { |
/* printk(KERN_ERR "%s: Could not find device: %s\n", |
__FUNCTION__, dev_name); */ |
rv = -ENODEV; |
} |
|
return rv; |
} |
|
int vlan_dev_get_vid(const char *dev_name, unsigned short* result) |
{ |
struct net_device *dev = dev_get_by_name(dev_name); |
int rv = 0; |
|
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
*result = VLAN_DEV_INFO(dev)->vlan_id; |
dev_put(dev); |
rv = 0; |
} else { |
/*printk(KERN_ERR |
"%s: %s is not a vlan device, priv_flags: %hX.\n", |
__FUNCTION__, dev->name, dev->priv_flags);*/ |
dev_put(dev); |
rv = -EINVAL; |
} |
} else { |
/* printk(KERN_ERR "%s: Could not find device: %s\n", |
__FUNCTION__, dev_name);*/ |
rv = -ENODEV; |
} |
|
return rv; |
} |
|
|
int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p) |
{ |
struct sockaddr *addr = (struct sockaddr *)(addr_struct_p); |
int i; |
|
if (netif_running(dev)) |
return -EBUSY; |
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
|
printk("%s: Setting MAC address to ", dev->name); |
for (i = 0; i < 6; i++) |
printk(" %2.2x", dev->dev_addr[i]); |
printk(".\n"); |
|
if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr, |
dev->dev_addr, |
dev->addr_len) != 0) { |
if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) { |
int flgs = VLAN_DEV_INFO(dev)->real_dev->flags; |
|
/* Increment our in-use promiscuity counter */ |
dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1); |
|
/* Make PROMISC visible to the user. */ |
flgs |= IFF_PROMISC; |
printk("VLAN (%s): Setting underlying device (%s) to promiscious mode.\n", |
dev->name, VLAN_DEV_INFO(dev)->real_dev->name); |
dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs); |
} |
} else { |
printk("VLAN (%s): Underlying device (%s) has same MAC, not checking promiscious mode.\n", |
dev->name, VLAN_DEV_INFO(dev)->real_dev->name); |
} |
|
return 0; |
} |
|
static inline int vlan_dmi_equals(struct dev_mc_list *dmi1, |
struct dev_mc_list *dmi2) |
{ |
return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) && |
(memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0)); |
} |
|
/** dmi is a single entry into a dev_mc_list, a single node. mc_list is |
* an entire list, and we'll iterate through it. |
*/ |
static int vlan_should_add_mc(struct dev_mc_list *dmi, struct dev_mc_list *mc_list) |
{ |
struct dev_mc_list *idmi; |
|
for (idmi = mc_list; idmi != NULL; ) { |
if (vlan_dmi_equals(dmi, idmi)) { |
if (dmi->dmi_users > idmi->dmi_users) |
return 1; |
else |
return 0; |
} else { |
idmi = idmi->next; |
} |
} |
|
return 1; |
} |
|
static inline void vlan_destroy_mc_list(struct dev_mc_list *mc_list) |
{ |
struct dev_mc_list *dmi = mc_list; |
struct dev_mc_list *next; |
|
while(dmi) { |
next = dmi->next; |
kfree(dmi); |
dmi = next; |
} |
} |
|
static void vlan_copy_mc_list(struct dev_mc_list *mc_list, struct vlan_dev_info *vlan_info) |
{ |
struct dev_mc_list *dmi, *new_dmi; |
|
vlan_destroy_mc_list(vlan_info->old_mc_list); |
vlan_info->old_mc_list = NULL; |
|
for (dmi = mc_list; dmi != NULL; dmi = dmi->next) { |
new_dmi = kmalloc(sizeof(*new_dmi), GFP_ATOMIC); |
if (new_dmi == NULL) { |
printk(KERN_ERR "vlan: cannot allocate memory. " |
"Multicast may not work properly from now.\n"); |
return; |
} |
|
/* Copy whole structure, then make new 'next' pointer */ |
*new_dmi = *dmi; |
new_dmi->next = vlan_info->old_mc_list; |
vlan_info->old_mc_list = new_dmi; |
} |
} |
|
static void vlan_flush_mc_list(struct net_device *dev) |
{ |
struct dev_mc_list *dmi = dev->mc_list; |
|
while (dmi) { |
dev_mc_delete(dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); |
printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from vlan interface\n", |
dev->name, |
dmi->dmi_addr[0], |
dmi->dmi_addr[1], |
dmi->dmi_addr[2], |
dmi->dmi_addr[3], |
dmi->dmi_addr[4], |
dmi->dmi_addr[5]); |
dmi = dev->mc_list; |
} |
|
/* dev->mc_list is NULL by the time we get here. */ |
vlan_destroy_mc_list(VLAN_DEV_INFO(dev)->old_mc_list); |
VLAN_DEV_INFO(dev)->old_mc_list = NULL; |
} |
|
int vlan_dev_open(struct net_device *dev) |
{ |
if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP)) |
return -ENETDOWN; |
|
return 0; |
} |
|
int vlan_dev_stop(struct net_device *dev) |
{ |
vlan_flush_mc_list(dev); |
return 0; |
} |
|
int vlan_dev_init(struct net_device *dev) |
{ |
/* TODO: figure this out, maybe do nothing?? */ |
return 0; |
} |
|
void vlan_dev_destruct(struct net_device *dev) |
{ |
if (dev) { |
vlan_flush_mc_list(dev); |
if (dev->priv) { |
if (VLAN_DEV_INFO(dev)->dent) |
BUG(); |
|
kfree(dev->priv); |
dev->priv = NULL; |
} |
} |
} |
|
/** Taken from Gleb + Lennert's VLAN code, and modified... */ |
void vlan_dev_set_multicast_list(struct net_device *vlan_dev) |
{ |
struct dev_mc_list *dmi; |
struct net_device *real_dev; |
int inc; |
|
if (vlan_dev && (vlan_dev->priv_flags & IFF_802_1Q_VLAN)) { |
/* Then it's a real vlan device, as far as we can tell.. */ |
real_dev = VLAN_DEV_INFO(vlan_dev)->real_dev; |
|
/* compare the current promiscuity to the last promisc we had.. */ |
inc = vlan_dev->promiscuity - VLAN_DEV_INFO(vlan_dev)->old_promiscuity; |
if (inc) { |
printk(KERN_INFO "%s: dev_set_promiscuity(master, %d)\n", |
vlan_dev->name, inc); |
dev_set_promiscuity(real_dev, inc); /* found in dev.c */ |
VLAN_DEV_INFO(vlan_dev)->old_promiscuity = vlan_dev->promiscuity; |
} |
|
inc = vlan_dev->allmulti - VLAN_DEV_INFO(vlan_dev)->old_allmulti; |
if (inc) { |
printk(KERN_INFO "%s: dev_set_allmulti(master, %d)\n", |
vlan_dev->name, inc); |
dev_set_allmulti(real_dev, inc); /* dev.c */ |
VLAN_DEV_INFO(vlan_dev)->old_allmulti = vlan_dev->allmulti; |
} |
|
/* looking for addresses to add to master's list */ |
for (dmi = vlan_dev->mc_list; dmi != NULL; dmi = dmi->next) { |
if (vlan_should_add_mc(dmi, VLAN_DEV_INFO(vlan_dev)->old_mc_list)) { |
dev_mc_add(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); |
printk(KERN_DEBUG "%s: add %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address to master interface\n", |
vlan_dev->name, |
dmi->dmi_addr[0], |
dmi->dmi_addr[1], |
dmi->dmi_addr[2], |
dmi->dmi_addr[3], |
dmi->dmi_addr[4], |
dmi->dmi_addr[5]); |
} |
} |
|
/* looking for addresses to delete from master's list */ |
for (dmi = VLAN_DEV_INFO(vlan_dev)->old_mc_list; dmi != NULL; dmi = dmi->next) { |
if (vlan_should_add_mc(dmi, vlan_dev->mc_list)) { |
/* if we think we should add it to the new list, then we should really |
* delete it from the real list on the underlying device. |
*/ |
dev_mc_delete(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0); |
printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from master interface\n", |
vlan_dev->name, |
dmi->dmi_addr[0], |
dmi->dmi_addr[1], |
dmi->dmi_addr[2], |
dmi->dmi_addr[3], |
dmi->dmi_addr[4], |
dmi->dmi_addr[5]); |
} |
} |
|
/* save multicast list */ |
vlan_copy_mc_list(vlan_dev->mc_list, VLAN_DEV_INFO(vlan_dev)); |
} |
} |
/vlan.c
0,0 → 1,785
/* -*- linux-c -*- |
* INET 802.1Q VLAN |
* Ethernet-type device handling. |
* |
* Authors: Ben Greear <greearb@candelatech.com> |
* Please send support related email to: vlan@scry.wanfear.com |
* VLAN Home Page: http://www.candelatech.com/~greear/vlan.html |
* |
* Fixes: |
* Fix for packet capture - Nick Eggleston <nick@dccinc.com>; |
* Add HW acceleration hooks - David S. Miller <davem@redhat.com>; |
* Correct all the locking - David S. Miller <davem@redhat.com>; |
* Use hash table for VLAN groups - David S. Miller <davem@redhat.com> |
* |
* This program is free software; you can redistribute it and/or |
* modify it under the terms of the GNU General Public License |
* as published by the Free Software Foundation; either version |
* 2 of the License, or (at your option) any later version. |
*/ |
|
#include <asm/uaccess.h> /* for copy_from_user */ |
#include <linux/module.h> |
#include <linux/netdevice.h> |
#include <linux/skbuff.h> |
#include <net/datalink.h> |
#include <linux/mm.h> |
#include <linux/in.h> |
#include <linux/init.h> |
#include <net/p8022.h> |
#include <net/arp.h> |
#include <linux/rtnetlink.h> |
#include <linux/brlock.h> |
#include <linux/notifier.h> |
|
#include <linux/if_vlan.h> |
#include "vlan.h" |
#include "vlanproc.h" |
|
/* Global VLAN variables */ |
|
/* Our listing of VLAN group(s) */ |
struct vlan_group *vlan_group_hash[VLAN_GRP_HASH_SIZE]; |
spinlock_t vlan_group_lock = SPIN_LOCK_UNLOCKED; |
#define vlan_grp_hashfn(IDX) ((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK) |
|
static char vlan_fullname[] = "802.1Q VLAN Support"; |
static unsigned int vlan_version = 1; |
static unsigned int vlan_release = 8; |
static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>"; |
static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>"; |
|
static int vlan_device_event(struct notifier_block *, unsigned long, void *); |
|
struct notifier_block vlan_notifier_block = { |
notifier_call: vlan_device_event, |
}; |
|
/* These may be changed at run-time through IOCTLs */ |
|
/* Determines interface naming scheme. */ |
unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; |
|
/* DO reorder the header by default */ |
unsigned short vlan_default_dev_flags = 1; |
|
static struct packet_type vlan_packet_type = { |
type: __constant_htons(ETH_P_8021Q), |
dev: NULL, |
func: vlan_skb_recv, /* VLAN receive method */ |
data: (void *)(-1), /* Set here '(void *)1' when this code can SHARE SKBs */ |
next: NULL |
}; |
|
/* End of global variables definitions. */ |
|
/* |
* Function vlan_proto_init (pro) |
* |
* Initialize VLAN protocol layer, |
* |
*/ |
static int __init vlan_proto_init(void) |
{ |
int err; |
|
printk(VLAN_INF "%s v%u.%u %s\n", |
vlan_fullname, vlan_version, vlan_release, vlan_copyright); |
printk(VLAN_INF "All bugs added by %s\n", |
vlan_buggyright); |
|
/* proc file system initialization */ |
err = vlan_proc_init(); |
if (err < 0) { |
printk(KERN_ERR |
"%s %s: can't create entry in proc filesystem!\n", |
__FUNCTION__, VLAN_NAME); |
return 1; |
} |
|
dev_add_pack(&vlan_packet_type); |
|
/* Register us to receive netdevice events */ |
register_netdevice_notifier(&vlan_notifier_block); |
|
vlan_ioctl_hook = vlan_ioctl_handler; |
|
return 0; |
} |
|
/* |
* Module 'remove' entry point. |
* o delete /proc/net/router directory and static entries. |
*/ |
static void __exit vlan_cleanup_module(void) |
{ |
int i; |
|
/* This table must be empty if there are no module |
* references left. |
*/ |
for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) { |
if (vlan_group_hash[i] != NULL) |
BUG(); |
} |
|
/* Un-register us from receiving netdevice events */ |
unregister_netdevice_notifier(&vlan_notifier_block); |
|
dev_remove_pack(&vlan_packet_type); |
vlan_proc_cleanup(); |
vlan_ioctl_hook = NULL; |
} |
|
module_init(vlan_proto_init); |
module_exit(vlan_cleanup_module); |
|
/* Must be invoked with vlan_group_lock held. */ |
static struct vlan_group *__vlan_find_group(int real_dev_ifindex) |
{ |
struct vlan_group *grp; |
|
for (grp = vlan_group_hash[vlan_grp_hashfn(real_dev_ifindex)]; |
grp != NULL; |
grp = grp->next) { |
if (grp->real_dev_ifindex == real_dev_ifindex) |
break; |
} |
|
return grp; |
} |
|
/* Must hold vlan_group_lock. */ |
static void __grp_hash(struct vlan_group *grp) |
{ |
struct vlan_group **head; |
|
head = &vlan_group_hash[vlan_grp_hashfn(grp->real_dev_ifindex)]; |
grp->next = *head; |
*head = grp; |
} |
|
/* Must hold vlan_group_lock. */ |
static void __grp_unhash(struct vlan_group *grp) |
{ |
struct vlan_group *next, **pprev; |
|
pprev = &vlan_group_hash[vlan_grp_hashfn(grp->real_dev_ifindex)]; |
next = *pprev; |
while (next != grp) { |
pprev = &next->next; |
next = *pprev; |
} |
*pprev = grp->next; |
} |
|
/* Find the protocol handler. Assumes VID < VLAN_VID_MASK. |
* |
* Must be invoked with vlan_group_lock held. |
*/ |
struct net_device *__find_vlan_dev(struct net_device *real_dev, |
unsigned short VID) |
{ |
struct vlan_group *grp = __vlan_find_group(real_dev->ifindex); |
|
if (grp) |
return grp->vlan_devices[VID]; |
|
return NULL; |
} |
|
/* This returns 0 if everything went fine. |
* It will return 1 if the group was killed as a result. |
* A negative return indicates failure. |
* |
* The RTNL lock must be held. |
*/ |
static int unregister_vlan_dev(struct net_device *real_dev, |
unsigned short vlan_id) |
{ |
struct net_device *dev = NULL; |
int real_dev_ifindex = real_dev->ifindex; |
struct vlan_group *grp; |
int i, ret; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id); |
#endif |
|
/* sanity check */ |
if (vlan_id >= VLAN_VID_MASK) |
return -EINVAL; |
|
spin_lock_bh(&vlan_group_lock); |
grp = __vlan_find_group(real_dev_ifindex); |
spin_unlock_bh(&vlan_group_lock); |
|
ret = 0; |
|
if (grp) { |
dev = grp->vlan_devices[vlan_id]; |
if (dev) { |
/* Remove proc entry */ |
vlan_proc_rem_dev(dev); |
|
/* Take it out of our own structures, but be sure to |
* interlock with HW accelerating devices or SW vlan |
* input packet processing. |
*/ |
if (real_dev->features & |
(NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) { |
real_dev->vlan_rx_kill_vid(real_dev, vlan_id); |
} |
|
br_write_lock(BR_NETPROTO_LOCK); |
grp->vlan_devices[vlan_id] = NULL; |
br_write_unlock(BR_NETPROTO_LOCK); |
|
|
/* Caller unregisters (and if necessary, puts) |
* VLAN device, but we get rid of the reference to |
* real_dev here. |
*/ |
dev_put(real_dev); |
|
/* If the group is now empty, kill off the |
* group. |
*/ |
for (i = 0; i < VLAN_VID_MASK; i++) |
if (grp->vlan_devices[i]) |
break; |
|
if (i == VLAN_VID_MASK) { |
if (real_dev->features & NETIF_F_HW_VLAN_RX) |
real_dev->vlan_rx_register(real_dev, NULL); |
|
spin_lock_bh(&vlan_group_lock); |
__grp_unhash(grp); |
spin_unlock_bh(&vlan_group_lock); |
|
/* Free the group, after we have removed it |
* from the hash. |
*/ |
kfree(grp); |
grp = NULL; |
|
ret = 1; |
} |
|
MOD_DEC_USE_COUNT; |
} |
} |
|
return ret; |
} |
|
static int unregister_vlan_device(const char *vlan_IF_name) |
{ |
struct net_device *dev = NULL; |
int ret; |
|
|
dev = dev_get_by_name(vlan_IF_name); |
ret = -EINVAL; |
if (dev) { |
if (dev->priv_flags & IFF_802_1Q_VLAN) { |
rtnl_lock(); |
|
ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, |
VLAN_DEV_INFO(dev)->vlan_id); |
|
dev_put(dev); |
unregister_netdevice(dev); |
|
rtnl_unlock(); |
|
if (ret == 1) |
ret = 0; |
} else { |
printk(VLAN_ERR |
"%s: ERROR: Tried to remove a non-vlan device " |
"with VLAN code, name: %s priv_flags: %hX\n", |
__FUNCTION__, dev->name, dev->priv_flags); |
dev_put(dev); |
ret = -EPERM; |
} |
} else { |
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__); |
#endif |
ret = -EINVAL; |
} |
|
return ret; |
} |
|
/* Attach a VLAN device to a mac address (ie Ethernet Card). |
* Returns the device that was created, or NULL if there was |
* an error of some kind. |
*/ |
static struct net_device *register_vlan_device(const char *eth_IF_name, |
unsigned short VLAN_ID) |
{ |
struct vlan_group *grp; |
struct net_device *new_dev; |
struct net_device *real_dev; /* the ethernet device */ |
int malloc_size = 0; |
int r; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n", |
__FUNCTION__, eth_IF_name, VLAN_ID); |
#endif |
|
if (VLAN_ID >= VLAN_VID_MASK) |
goto out_ret_null; |
|
/* find the device relating to eth_IF_name. */ |
real_dev = dev_get_by_name(eth_IF_name); |
if (!real_dev) |
goto out_ret_null; |
|
if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { |
printk(VLAN_DBG "%s: VLANs not supported on %s.\n", |
__FUNCTION__, real_dev->name); |
goto out_put_dev; |
} |
|
if ((real_dev->features & NETIF_F_HW_VLAN_RX) && |
(real_dev->vlan_rx_register == NULL || |
real_dev->vlan_rx_kill_vid == NULL)) { |
printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", |
__FUNCTION__, real_dev->name); |
goto out_put_dev; |
} |
|
if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && |
(real_dev->vlan_rx_add_vid == NULL || |
real_dev->vlan_rx_kill_vid == NULL)) { |
printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", |
__FUNCTION__, real_dev->name); |
goto out_put_dev; |
} |
|
/* From this point on, all the data structures must remain |
* consistent. |
*/ |
rtnl_lock(); |
|
/* The real device must be up and operating in order to |
* assosciate a VLAN device with it. |
*/ |
if (!(real_dev->flags & IFF_UP)) |
goto out_unlock; |
|
spin_lock_bh(&vlan_group_lock); |
r = (__find_vlan_dev(real_dev, VLAN_ID) != NULL); |
spin_unlock_bh(&vlan_group_lock); |
|
if (r) { |
/* was already registered. */ |
printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__); |
goto out_unlock; |
} |
|
malloc_size = (sizeof(struct net_device)); |
new_dev = (struct net_device *) kmalloc(malloc_size, GFP_KERNEL); |
VLAN_MEM_DBG("net_device malloc, addr: %p size: %i\n", |
new_dev, malloc_size); |
|
if (new_dev == NULL) |
goto out_unlock; |
|
memset(new_dev, 0, malloc_size); |
|
/* Set us up to have no queue, as the underlying Hardware device |
* can do all the queueing we could want. |
*/ |
new_dev->tx_queue_len = 0; |
|
/* Gotta set up the fields for the device. */ |
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n", |
vlan_name_type); |
#endif |
switch (vlan_name_type) { |
case VLAN_NAME_TYPE_RAW_PLUS_VID: |
/* name will look like: eth1.0005 */ |
sprintf(new_dev->name, "%s.%.4i", real_dev->name, VLAN_ID); |
break; |
case VLAN_NAME_TYPE_PLUS_VID_NO_PAD: |
/* Put our vlan.VID in the name. |
* Name will look like: vlan5 |
*/ |
sprintf(new_dev->name, "vlan%i", VLAN_ID); |
break; |
case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD: |
/* Put our vlan.VID in the name. |
* Name will look like: eth0.5 |
*/ |
sprintf(new_dev->name, "%s.%i", real_dev->name, VLAN_ID); |
break; |
case VLAN_NAME_TYPE_PLUS_VID: |
/* Put our vlan.VID in the name. |
* Name will look like: vlan0005 |
*/ |
default: |
sprintf(new_dev->name, "vlan%.4i", VLAN_ID); |
}; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name); |
#endif |
/* set up method calls */ |
new_dev->init = vlan_dev_init; |
new_dev->destructor = vlan_dev_destruct; |
new_dev->features |= NETIF_F_DYNALLOC ; |
|
/* new_dev->ifindex = 0; it will be set when added to |
* the global list. |
* iflink is set as well. |
*/ |
new_dev->get_stats = vlan_dev_get_stats; |
|
/* IFF_BROADCAST|IFF_MULTICAST; ??? */ |
new_dev->flags = real_dev->flags; |
new_dev->flags &= ~IFF_UP; |
|
/* Make this thing known as a VLAN device */ |
new_dev->priv_flags |= IFF_802_1Q_VLAN; |
|
/* need 4 bytes for extra VLAN header info, |
* hope the underlying device can handle it. |
*/ |
new_dev->mtu = real_dev->mtu; |
new_dev->change_mtu = vlan_dev_change_mtu; |
|
/* TODO: maybe just assign it to be ETHERNET? */ |
new_dev->type = real_dev->type; |
|
new_dev->hard_header_len = real_dev->hard_header_len; |
if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) { |
/* Regular ethernet + 4 bytes (18 total). */ |
new_dev->hard_header_len += VLAN_HLEN; |
} |
|
new_dev->priv = kmalloc(sizeof(struct vlan_dev_info), |
GFP_KERNEL); |
VLAN_MEM_DBG("new_dev->priv malloc, addr: %p size: %i\n", |
new_dev->priv, |
sizeof(struct vlan_dev_info)); |
|
if (new_dev->priv == NULL) |
goto out_free_newdev; |
|
memset(new_dev->priv, 0, sizeof(struct vlan_dev_info)); |
|
memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len); |
memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len); |
new_dev->addr_len = real_dev->addr_len; |
|
new_dev->open = vlan_dev_open; |
new_dev->stop = vlan_dev_stop; |
|
if (real_dev->features & NETIF_F_HW_VLAN_TX) { |
new_dev->hard_header = real_dev->hard_header; |
new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit; |
new_dev->rebuild_header = real_dev->rebuild_header; |
} else { |
new_dev->hard_header = vlan_dev_hard_header; |
new_dev->hard_start_xmit = vlan_dev_hard_start_xmit; |
new_dev->rebuild_header = vlan_dev_rebuild_header; |
} |
new_dev->hard_header_parse = real_dev->hard_header_parse; |
new_dev->set_mac_address = vlan_dev_set_mac_address; |
new_dev->set_multicast_list = vlan_dev_set_multicast_list; |
|
VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */ |
VLAN_DEV_INFO(new_dev)->real_dev = real_dev; |
VLAN_DEV_INFO(new_dev)->dent = NULL; |
VLAN_DEV_INFO(new_dev)->flags = vlan_default_dev_flags; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "About to go find the group for idx: %i\n", |
real_dev->ifindex); |
#endif |
|
/* So, got the sucker initialized, now lets place |
* it into our local structure. |
*/ |
spin_lock_bh(&vlan_group_lock); |
grp = __vlan_find_group(real_dev->ifindex); |
spin_unlock_bh(&vlan_group_lock); |
|
/* Note, we are running under the RTNL semaphore |
* so it cannot "appear" on us. |
*/ |
if (!grp) { /* need to add a new group */ |
grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL); |
if (!grp) |
goto out_free_newdev_priv; |
|
/* printk(KERN_ALERT "VLAN REGISTER: Allocated new group.\n"); */ |
memset(grp, 0, sizeof(struct vlan_group)); |
grp->real_dev_ifindex = real_dev->ifindex; |
|
spin_lock_bh(&vlan_group_lock); |
__grp_hash(grp); |
spin_unlock_bh(&vlan_group_lock); |
|
if (real_dev->features & NETIF_F_HW_VLAN_RX) |
real_dev->vlan_rx_register(real_dev, grp); |
} |
|
grp->vlan_devices[VLAN_ID] = new_dev; |
|
if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */ |
printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n", |
new_dev->name); |
|
if (real_dev->features & NETIF_F_HW_VLAN_FILTER) |
real_dev->vlan_rx_add_vid(real_dev, VLAN_ID); |
|
register_netdevice(new_dev); |
|
rtnl_unlock(); |
|
/* NOTE: We have a reference to the real device, |
* so hold on to the reference. |
*/ |
MOD_INC_USE_COUNT; /* Add was a success!! */ |
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "Allocated new device successfully, returning.\n"); |
#endif |
return new_dev; |
|
out_free_newdev_priv: |
kfree(new_dev->priv); |
|
out_free_newdev: |
kfree(new_dev); |
|
out_unlock: |
rtnl_unlock(); |
|
out_put_dev: |
dev_put(real_dev); |
|
out_ret_null: |
return NULL; |
} |
|
static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) |
{ |
struct net_device *dev = (struct net_device *)(ptr); |
struct vlan_group *grp = NULL; |
int i, flgs; |
struct net_device *vlandev = NULL; |
|
spin_lock_bh(&vlan_group_lock); |
grp = __vlan_find_group(dev->ifindex); |
spin_unlock_bh(&vlan_group_lock); |
|
if (!grp) |
goto out; |
|
/* It is OK that we do not hold the group lock right now, |
* as we run under the RTNL lock. |
*/ |
|
switch (event) { |
case NETDEV_CHANGEADDR: |
case NETDEV_GOING_DOWN: |
/* Ignore for now */ |
break; |
|
case NETDEV_DOWN: |
/* Put all VLANs for this dev in the down state too. */ |
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
vlandev = grp->vlan_devices[i]; |
if (!vlandev) |
continue; |
|
flgs = vlandev->flags; |
if (!(flgs & IFF_UP)) |
continue; |
|
dev_change_flags(vlandev, flgs & ~IFF_UP); |
} |
break; |
|
case NETDEV_UP: |
/* Put all VLANs for this dev in the up state too. */ |
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
vlandev = grp->vlan_devices[i]; |
if (!vlandev) |
continue; |
|
flgs = vlandev->flags; |
if (flgs & IFF_UP) |
continue; |
|
dev_change_flags(vlandev, flgs | IFF_UP); |
} |
break; |
|
case NETDEV_UNREGISTER: |
/* Delete all VLANs for this dev. */ |
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
int ret; |
|
vlandev = grp->vlan_devices[i]; |
if (!vlandev) |
continue; |
|
ret = unregister_vlan_dev(dev, |
VLAN_DEV_INFO(vlandev)->vlan_id); |
|
dev_put(vlandev); |
unregister_netdevice(vlandev); |
|
/* Group was destroyed? */ |
if (ret == 1) |
break; |
} |
break; |
}; |
|
out: |
return NOTIFY_DONE; |
} |
|
/* |
* VLAN IOCTL handler. |
* o execute requested action or pass command to the device driver |
* arg is really a void* to a vlan_ioctl_args structure. |
*/ |
int vlan_ioctl_handler(unsigned long arg) |
{ |
int err = 0; |
unsigned short vid = 0; |
struct vlan_ioctl_args args; |
|
if (copy_from_user(&args, (void*)arg, |
sizeof(struct vlan_ioctl_args))) |
return -EFAULT; |
|
/* Null terminate this sucker, just in case. */ |
args.device1[23] = 0; |
args.u.device2[23] = 0; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd); |
#endif |
|
switch (args.cmd) { |
case SET_VLAN_INGRESS_PRIORITY_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
|
err = vlan_dev_set_ingress_priority(args.device1, |
args.u.skb_priority, |
args.vlan_qos); |
break; |
|
case SET_VLAN_EGRESS_PRIORITY_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
err = vlan_dev_set_egress_priority(args.device1, |
args.u.skb_priority, |
args.vlan_qos); |
break; |
|
case SET_VLAN_FLAG_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
err = vlan_dev_set_vlan_flag(args.device1, |
args.u.flag, |
args.vlan_qos); |
break; |
|
case SET_VLAN_NAME_TYPE_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
if ((args.u.name_type >= 0) && |
(args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) { |
vlan_name_type = args.u.name_type; |
err = 0; |
} else { |
err = -EINVAL; |
} |
break; |
|
case ADD_VLAN_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
/* we have been given the name of the Ethernet Device we want to |
* talk to: args.dev1 We also have the |
* VLAN ID: args.u.VID |
*/ |
if (register_vlan_device(args.device1, args.u.VID)) { |
err = 0; |
} else { |
err = -EINVAL; |
} |
break; |
|
case DEL_VLAN_CMD: |
if (!capable(CAP_NET_ADMIN)) |
return -EPERM; |
/* Here, the args.dev1 is the actual VLAN we want |
* to get rid of. |
*/ |
err = unregister_vlan_device(args.device1); |
break; |
|
case GET_VLAN_INGRESS_PRIORITY_CMD: |
/* TODO: Implement |
err = vlan_dev_get_ingress_priority(args); |
if (copy_to_user((void*)arg, &args, |
sizeof(struct vlan_ioctl_args))) { |
err = -EFAULT; |
} |
*/ |
err = -EINVAL; |
break; |
|
case GET_VLAN_EGRESS_PRIORITY_CMD: |
/* TODO: Implement |
err = vlan_dev_get_egress_priority(args.device1, &(args.args); |
if (copy_to_user((void*)arg, &args, |
sizeof(struct vlan_ioctl_args))) { |
err = -EFAULT; |
} |
*/ |
err = -EINVAL; |
break; |
|
case GET_VLAN_REALDEV_NAME_CMD: |
err = vlan_dev_get_realdev_name(args.device1, args.u.device2); |
if (copy_to_user((void*)arg, &args, |
sizeof(struct vlan_ioctl_args))) { |
err = -EFAULT; |
} |
break; |
|
case GET_VLAN_VID_CMD: |
err = vlan_dev_get_vid(args.device1, &vid); |
args.u.VID = vid; |
if (copy_to_user((void*)arg, &args, |
sizeof(struct vlan_ioctl_args))) { |
err = -EFAULT; |
} |
break; |
|
default: |
/* pass on to underlying device instead?? */ |
printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n", |
__FUNCTION__, args.cmd); |
return -EINVAL; |
}; |
|
return err; |
} |
|
MODULE_LICENSE("GPL"); |
/vlanproc.c
0,0 → 1,469
/****************************************************************************** |
* vlanproc.c VLAN Module. /proc filesystem interface. |
* |
* This module is completely hardware-independent and provides |
* access to the router using Linux /proc filesystem. |
* |
* Author: Ben Greear, <greearb@candelatech.com> coppied from wanproc.c |
* by: Gene Kozin <genek@compuserve.com> |
* |
* Copyright: (c) 1998 Ben Greear |
* |
* This program is free software; you can redistribute it and/or |
* modify it under the terms of the GNU General Public License |
* as published by the Free Software Foundation; either version |
* 2 of the License, or (at your option) any later version. |
* ============================================================================ |
* Jan 20, 1998 Ben Greear Initial Version |
*****************************************************************************/ |
|
#include <linux/config.h> |
#include <linux/stddef.h> /* offsetof(), etc. */ |
#include <linux/errno.h> /* return codes */ |
#include <linux/kernel.h> |
#include <linux/slab.h> /* kmalloc(), kfree() */ |
#include <linux/mm.h> /* verify_area(), etc. */ |
#include <linux/string.h> /* inline mem*, str* functions */ |
#include <linux/init.h> /* __initfunc et al. */ |
#include <asm/segment.h> /* kernel <-> user copy */ |
#include <asm/byteorder.h> /* htons(), etc. */ |
#include <asm/uaccess.h> /* copy_to_user */ |
#include <asm/io.h> |
#include <linux/proc_fs.h> |
#include <linux/fs.h> |
#include <linux/netdevice.h> |
#include <linux/if_vlan.h> |
#include "vlanproc.h" |
#include "vlan.h" |
|
/****** Function Prototypes *************************************************/ |
|
#ifdef CONFIG_PROC_FS |
|
/* Proc filesystem interface */ |
static ssize_t vlan_proc_read(struct file *file, char *buf, size_t count, |
loff_t *ppos); |
|
/* Methods for preparing data for reading proc entries */ |
|
static int vlan_config_get_info(char *buf, char **start, off_t offs, int len); |
static int vlandev_get_info(char *buf, char **start, off_t offs, int len); |
|
/* Miscellaneous */ |
|
/* |
* Global Data |
*/ |
|
/* |
* Names of the proc directory entries |
*/ |
|
static char name_root[] = "vlan"; |
static char name_conf[] = "config"; |
static char term_msg[] = "***KERNEL: Out of buffer space!***\n"; |
|
/* |
* Structures for interfacing with the /proc filesystem. |
* VLAN creates its own directory /proc/net/vlan with the folowing |
* entries: |
* config device status/configuration |
* <device> entry for each device |
*/ |
|
/* |
* Generic /proc/net/vlan/<file> file and inode operations |
*/ |
|
static struct file_operations vlan_fops = { |
read: vlan_proc_read, |
ioctl: NULL, /* vlan_proc_ioctl */ |
}; |
|
/* |
* /proc/net/vlan/<device> file and inode operations |
*/ |
|
static struct file_operations vlandev_fops = { |
read: vlan_proc_read, |
ioctl: NULL, /* vlan_proc_ioctl */ |
}; |
|
/* |
* Proc filesystem derectory entries. |
*/ |
|
/* |
* /proc/net/vlan |
*/ |
|
static struct proc_dir_entry *proc_vlan_dir; |
|
/* |
* /proc/net/vlan/config |
*/ |
|
static struct proc_dir_entry *proc_vlan_conf; |
|
/* Strings */ |
static char conf_hdr[] = "VLAN Dev name | VLAN ID\n"; |
|
/* |
* Interface functions |
*/ |
|
/* |
* Clean up /proc/net/vlan entries |
*/ |
|
void vlan_proc_cleanup(void) |
{ |
if (proc_vlan_conf) |
remove_proc_entry(name_conf, proc_vlan_dir); |
|
if (proc_vlan_dir) |
proc_net_remove(name_root); |
|
/* Dynamically added entries should be cleaned up as their vlan_device |
* is removed, so we should not have to take care of it here... |
*/ |
} |
|
/* |
* Create /proc/net/vlan entries |
*/ |
|
int __init vlan_proc_init(void) |
{ |
proc_vlan_dir = proc_mkdir(name_root, proc_net); |
if (proc_vlan_dir) { |
proc_vlan_conf = create_proc_entry(name_conf, |
S_IFREG|S_IRUSR|S_IWUSR, |
proc_vlan_dir); |
if (proc_vlan_conf) { |
proc_vlan_conf->proc_fops = &vlan_fops; |
proc_vlan_conf->get_info = vlan_config_get_info; |
return 0; |
} |
} |
vlan_proc_cleanup(); |
return -ENOBUFS; |
} |
|
/* |
* Add directory entry for VLAN device. |
*/ |
|
int vlan_proc_add_dev (struct net_device *vlandev) |
{ |
struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev); |
|
if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) { |
printk(KERN_ERR |
"ERROR: vlan_proc_add, device -:%s:- is NOT a VLAN\n", |
vlandev->name); |
return -EINVAL; |
} |
|
dev_info->dent = create_proc_entry(vlandev->name, |
S_IFREG|S_IRUSR|S_IWUSR, |
proc_vlan_dir); |
if (!dev_info->dent) |
return -ENOBUFS; |
|
dev_info->dent->proc_fops = &vlandev_fops; |
dev_info->dent->get_info = &vlandev_get_info; |
dev_info->dent->data = vlandev; |
|
#ifdef VLAN_DEBUG |
printk(KERN_ERR "vlan_proc_add, device -:%s:- being added.\n", |
vlandev->name); |
#endif |
return 0; |
} |
|
/* |
* Delete directory entry for VLAN device. |
*/ |
int vlan_proc_rem_dev(struct net_device *vlandev) |
{ |
if (!vlandev) { |
printk(VLAN_ERR "%s: invalid argument: %p\n", |
__FUNCTION__, vlandev); |
return -EINVAL; |
} |
|
if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) { |
printk(VLAN_DBG "%s: invalid argument, device: %s is not a VLAN device, priv_flags: 0x%4hX.\n", |
__FUNCTION__, vlandev->name, vlandev->priv_flags); |
return -EINVAL; |
} |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG __FUNCTION__ ": dev: %p\n", vlandev); |
#endif |
|
/** NOTE: This will consume the memory pointed to by dent, it seems. */ |
if (VLAN_DEV_INFO(vlandev)->dent) { |
remove_proc_entry(VLAN_DEV_INFO(vlandev)->dent->name, proc_vlan_dir); |
VLAN_DEV_INFO(vlandev)->dent = NULL; |
} |
|
return 0; |
} |
|
/****** Proc filesystem entry points ****************************************/ |
|
/* |
* Read VLAN proc directory entry. |
* This is universal routine for reading all entries in /proc/net/vlan |
* directory. Each directory entry contains a pointer to the 'method' for |
* preparing data for that entry. |
* o verify arguments |
* o allocate kernel buffer |
* o call get_info() to prepare data |
* o copy data to user space |
* o release kernel buffer |
* |
* Return: number of bytes copied to user space (0, if no data) |
* <0 error |
*/ |
static ssize_t vlan_proc_read(struct file *file, char *buf, |
size_t count, loff_t *ppos) |
{ |
struct inode *inode = file->f_dentry->d_inode; |
struct proc_dir_entry *dent; |
char *page; |
int pos, offs, len; |
|
if (count <= 0) |
return 0; |
|
dent = inode->u.generic_ip; |
if ((dent == NULL) || (dent->get_info == NULL)) |
return 0; |
|
page = kmalloc(VLAN_PROC_BUFSZ, GFP_KERNEL); |
VLAN_MEM_DBG("page malloc, addr: %p size: %i\n", |
page, VLAN_PROC_BUFSZ); |
|
if (page == NULL) |
return -ENOBUFS; |
|
pos = dent->get_info(page, dent->data, 0, 0); |
offs = file->f_pos; |
if (offs < pos) { |
len = min_t(int, pos - offs, count); |
if (copy_to_user(buf, (page + offs), len)) { |
kfree(page); |
return -EFAULT; |
} |
|
file->f_pos += len; |
} else { |
len = 0; |
} |
|
kfree(page); |
VLAN_FMEM_DBG("page free, addr: %p\n", page); |
return len; |
} |
|
/* |
* The following few functions build the content of /proc/net/vlan/config |
*/ |
|
static int vlan_proc_get_vlan_info(char* buf, unsigned int cnt) |
{ |
struct net_device *vlandev = NULL; |
struct vlan_group *grp = NULL; |
int h, i; |
char *nm_type = NULL; |
struct vlan_dev_info *dev_info = NULL; |
|
#ifdef VLAN_DEBUG |
printk(VLAN_DBG __FUNCTION__ ": cnt == %i\n", cnt); |
#endif |
|
if (vlan_name_type == VLAN_NAME_TYPE_RAW_PLUS_VID) { |
nm_type = "VLAN_NAME_TYPE_RAW_PLUS_VID"; |
} else if (vlan_name_type == VLAN_NAME_TYPE_PLUS_VID_NO_PAD) { |
nm_type = "VLAN_NAME_TYPE_PLUS_VID_NO_PAD"; |
} else if (vlan_name_type == VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD) { |
nm_type = "VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD"; |
} else if (vlan_name_type == VLAN_NAME_TYPE_PLUS_VID) { |
nm_type = "VLAN_NAME_TYPE_PLUS_VID"; |
} else { |
nm_type = "UNKNOWN"; |
} |
|
cnt += sprintf(buf + cnt, "Name-Type: %s\n", nm_type); |
|
spin_lock_bh(&vlan_group_lock); |
for (h = 0; h < VLAN_GRP_HASH_SIZE; h++) { |
for (grp = vlan_group_hash[h]; grp != NULL; grp = grp->next) { |
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { |
vlandev = grp->vlan_devices[i]; |
if (!vlandev) |
continue; |
|
if ((cnt + 100) > VLAN_PROC_BUFSZ) { |
if ((cnt+strlen(term_msg)) < VLAN_PROC_BUFSZ) |
cnt += sprintf(buf+cnt, "%s", term_msg); |
|
goto out; |
} |
|
dev_info = VLAN_DEV_INFO(vlandev); |
cnt += sprintf(buf + cnt, "%-15s| %d | %s\n", |
vlandev->name, |
dev_info->vlan_id, |
dev_info->real_dev->name); |
} |
} |
} |
out: |
spin_unlock_bh(&vlan_group_lock); |
|
return cnt; |
} |
|
/* |
* Prepare data for reading 'Config' entry. |
* Return length of data. |
*/ |
|
static int vlan_config_get_info(char *buf, char **start, |
off_t offs, int len) |
{ |
strcpy(buf, conf_hdr); |
return vlan_proc_get_vlan_info(buf, (unsigned int)(strlen(conf_hdr))); |
} |
|
/* |
* Prepare data for reading <device> entry. |
* Return length of data. |
* |
* On entry, the 'start' argument will contain a pointer to VLAN device |
* data space. |
*/ |
|
static int vlandev_get_info(char *buf, char **start, |
off_t offs, int len) |
{ |
struct net_device *vlandev = (void *) start; |
struct net_device_stats *stats = NULL; |
struct vlan_dev_info *dev_info = NULL; |
struct vlan_priority_tci_mapping *mp; |
int cnt = 0; |
int i; |
|
if ((vlandev == NULL) || (!(vlandev->priv_flags & IFF_802_1Q_VLAN))) |
return 0; |
|
dev_info = VLAN_DEV_INFO(vlandev); |
|
cnt += sprintf(buf + cnt, "%s VID: %d REORDER_HDR: %i dev->priv_flags: %hx\n", |
vlandev->name, dev_info->vlan_id, |
(int)(dev_info->flags & 1), vlandev->priv_flags); |
|
stats = vlan_dev_get_stats(vlandev); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"total frames received", stats->rx_packets); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"total bytes received", stats->rx_bytes); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"Broadcast/Multicast Rcvd", stats->multicast); |
|
cnt += sprintf(buf + cnt, "\n%30s: %12lu\n", |
"total frames transmitted", stats->tx_packets); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"total bytes transmitted", stats->tx_bytes); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"total headroom inc", dev_info->cnt_inc_headroom_on_tx); |
|
cnt += sprintf(buf + cnt, "%30s: %12lu\n", |
"total encap on xmit", dev_info->cnt_encap_on_xmit); |
|
cnt += sprintf(buf + cnt, "Device: %s", dev_info->real_dev->name); |
|
/* now show all PRIORITY mappings relating to this VLAN */ |
cnt += sprintf(buf + cnt, "\nINGRESS priority mappings: 0:%lu 1:%lu 2:%lu 3:%lu 4:%lu 5:%lu 6:%lu 7:%lu\n", |
dev_info->ingress_priority_map[0], |
dev_info->ingress_priority_map[1], |
dev_info->ingress_priority_map[2], |
dev_info->ingress_priority_map[3], |
dev_info->ingress_priority_map[4], |
dev_info->ingress_priority_map[5], |
dev_info->ingress_priority_map[6], |
dev_info->ingress_priority_map[7]); |
|
if ((cnt + 100) > VLAN_PROC_BUFSZ) { |
if ((cnt + strlen(term_msg)) >= VLAN_PROC_BUFSZ) { |
/* should never get here */ |
return cnt; |
} else { |
cnt += sprintf(buf + cnt, "%s", term_msg); |
return cnt; |
} |
} |
|
cnt += sprintf(buf + cnt, "EGRESSS priority Mappings: "); |
|
for (i = 0; i < 16; i++) { |
mp = dev_info->egress_priority_map[i]; |
while (mp) { |
cnt += sprintf(buf + cnt, "%lu:%hu ", |
mp->priority, ((mp->vlan_qos >> 13) & 0x7)); |
|
if ((cnt + 100) > VLAN_PROC_BUFSZ) { |
if ((cnt + strlen(term_msg)) >= VLAN_PROC_BUFSZ) { |
/* should never get here */ |
return cnt; |
} else { |
cnt += sprintf(buf + cnt, "%s", term_msg); |
return cnt; |
} |
} |
mp = mp->next; |
} |
} |
|
cnt += sprintf(buf + cnt, "\n"); |
|
return cnt; |
} |
|
#else /* No CONFIG_PROC_FS */ |
|
/* |
* No /proc - output stubs |
*/ |
|
int __init vlan_proc_init (void) |
{ |
return 0; |
} |
|
void vlan_proc_cleanup(void) |
{ |
return; |
} |
|
|
int vlan_proc_add_dev(struct net_device *vlandev) |
{ |
return 0; |
} |
|
int vlan_proc_rem_dev(struct net_device *vlandev) |
{ |
return 0; |
} |
|
#endif /* No CONFIG_PROC_FS */ |
/vlan.h
0,0 → 1,79
#ifndef __BEN_VLAN_802_1Q_INC__ |
#define __BEN_VLAN_802_1Q_INC__ |
|
#include <linux/if_vlan.h> |
|
/* Uncomment this if you want debug traces to be shown. */ |
/* #define VLAN_DEBUG */ |
|
#define VLAN_ERR KERN_ERR |
#define VLAN_INF KERN_ALERT |
#define VLAN_DBG KERN_ALERT /* change these... to debug, having a hard time |
* changing the log level at run-time..for some reason. |
*/ |
|
/* |
|
These I use for memory debugging. I feared a leak at one time, but |
I never found it..and the problem seems to have dissappeared. Still, |
I'll bet they might prove useful again... --Ben |
|
|
#define VLAN_MEM_DBG(x, y, z) printk(VLAN_DBG __FUNCTION__ ": " x, y, z); |
#define VLAN_FMEM_DBG(x, y) printk(VLAN_DBG __FUNCTION__ ": " x, y); |
*/ |
|
/* This way they don't do anything! */ |
#define VLAN_MEM_DBG(x, y, z) |
#define VLAN_FMEM_DBG(x, y) |
|
|
extern unsigned short vlan_name_type; |
|
int vlan_ioctl_handler(unsigned long arg); |
|
#define VLAN_GRP_HASH_SHIFT 5 |
#define VLAN_GRP_HASH_SIZE (1 << VLAN_GRP_HASH_SHIFT) |
#define VLAN_GRP_HASH_MASK (VLAN_GRP_HASH_SIZE - 1) |
extern struct vlan_group *vlan_group_hash[VLAN_GRP_HASH_SIZE]; |
extern spinlock_t vlan_group_lock; |
|
/* Find a VLAN device by the MAC address of it's Ethernet device, and |
* it's VLAN ID. The default configuration is to have VLAN's scope |
* to be box-wide, so the MAC will be ignored. The mac will only be |
* looked at if we are configured to have a seperate set of VLANs per |
* each MAC addressable interface. Note that this latter option does |
* NOT follow the spec for VLANs, but may be useful for doing very |
* large quantities of VLAN MUX/DEMUX onto FrameRelay or ATM PVCs. |
* |
* Must be invoked with vlan_group_lock held and that lock MUST NOT |
* be dropped until a reference is obtained on the returned device. |
* You may drop the lock earlier if you are running under the RTNL |
* semaphore, however. |
*/ |
struct net_device *__find_vlan_dev(struct net_device* real_dev, |
unsigned short VID); /* vlan.c */ |
|
/* found in vlan_dev.c */ |
int vlan_dev_rebuild_header(struct sk_buff *skb); |
int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, |
struct packet_type* ptype); |
int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev, |
unsigned short type, void *daddr, void *saddr, |
unsigned len); |
int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev); |
int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev); |
int vlan_dev_change_mtu(struct net_device *dev, int new_mtu); |
int vlan_dev_set_mac_address(struct net_device *dev, void* addr); |
int vlan_dev_open(struct net_device* dev); |
int vlan_dev_stop(struct net_device* dev); |
int vlan_dev_init(struct net_device* dev); |
void vlan_dev_destruct(struct net_device* dev); |
int vlan_dev_set_ingress_priority(char* dev_name, __u32 skb_prio, short vlan_prio); |
int vlan_dev_set_egress_priority(char* dev_name, __u32 skb_prio, short vlan_prio); |
int vlan_dev_set_vlan_flag(char* dev_name, __u32 flag, short flag_val); |
void vlan_dev_set_multicast_list(struct net_device *vlan_dev); |
int vlan_dev_get_realdev_name(const char *dev_name, char* result); |
int vlan_dev_get_vid(const char *dev_name, unsigned short* result); |
|
#endif /* !(__BEN_VLAN_802_1Q_INC__) */ |
/vlanproc.h
0,0 → 1,12
#ifndef __BEN_VLAN_PROC_INC__ |
#define __BEN_VLAN_PROC_INC__ |
|
int vlan_proc_init(void); |
|
int vlan_proc_rem_dev(struct net_device *vlandev); |
int vlan_proc_add_dev (struct net_device *vlandev); |
void vlan_proc_cleanup (void); |
|
#define VLAN_PROC_BUFSZ (4096) /* buffer size for printing proc info */ |
|
#endif /* !(__BEN_VLAN_PROC_INC__) */ |
/Makefile
0,0 → 1,15
# |
# Makefile for the Linux VLAN layer. |
# |
# Note! Dependencies are done automagically by 'make dep', which also |
# removes any old dependencies. DON'T put your own dependencies here |
# unless it's something special (ie not a .c file). |
# |
# Note 2! The CFLAGS definition is now in the main makefile... |
|
O_TARGET := 8021q.o |
|
obj-y := vlan.o vlanproc.o vlan_dev.o |
obj-m := $(O_TARGET) |
|
include $(TOPDIR)/Rules.make |