OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /or1k/trunk/rtems/scripts-ada
    from Rev 1765 to Rev 208
    ↔ Reverse comparison
  •

Rev 1765 → Rev 208

/mkinstalldirs File deleted
mkinstalldirs Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: configure.in =================================================================== --- configure.in (revision 1765) +++ configure.in (nonexistent) @@ -1,52 +0,0 @@ -## $Id: configure.in,v 1.2 2001-09-27 12:02:52 chris Exp $ - -AC_INIT(binutils) -AM_INIT_AUTOMAKE(rtems-scripts_ada,20000125-0,no) - -AC_EXEEXT - -test -f ./setup.cache || cp ${srcdir}/setup.def ./setup.cache -. ./setup.cache - -# Some linux distributions use /usr/src/packages -# redhat uses /usr/src/redhat -# others might use /usr/src -AC_MSG_CHECKING(for rpm SPECS directory) -if test -d /usr/src/packages/SPECS; -then - RPM_SPECSdir=/usr/src/packages/SPECS; -elif test -d /usr/src/redhat/SPECS; -then - RPM_SPECSdir=/usr/src/redhat/SPECS; -elif test -d /usr/src/SPECS/; -then - RPM_SPECSdir=/usr/src/SPECS; -fi -if test x"$RPM_SPECSdir" = x"" ; then -AC_MSG_ERROR(not found) -fi -AC_MSG_RESULT($RPM_SPECSdir) -AC_SUBST(RPM_SPECSdir) - -GNATNEWLIBVERS="gnat-${gnat_version}-newlib-${newlib_version}" -AC_SUBST(GNATNEWLIBVERS) -BINUTILSVERS="gnat-${gnat_version}-binutils-${binutils_version}" -AC_SUBST(BINUTILSVERS) -GDBVERS="gnat-${gnat_version}-gdb-${gdb_version}" -AC_SUBST(GDBVERS) -BSPVERS="${rtems_version}" -AC_SUBST(RTEMS_VERSION) -AC_SUBST(BSPVERS) - -AC_OUTPUT( -Makefile -buildall -mkbinutilspec -mkgnatnewlibspec -mkgdbspec -mkbspspec -binutils/Makefile -gnatnewlib/Makefile -gdb/Makefile,, -chmod 755 buildall -) Index: binutils/Makefile.am =================================================================== --- binutils/Makefile.am (revision 1765) +++ binutils/Makefile.am (nonexistent) @@ -1,24 +0,0 @@ -## -## $Id: Makefile.am,v 1.2 2001-09-27 12:02:52 chris Exp $ -## - -AUTOMAKE_OPTIONS = foreign 1.4 - -MKBINUTILSSPEC = $(SHELL) $(top_builddir)/mkbinutilspec - -MKBINUTILSSPEC_DEPS = $(top_builddir)/mkbinutilspec binutils.spec.in \ - $(top_builddir)/setup.cache - -sparc-rtems-$(BINUTILSVERS).spec: $(MKBINUTILSSPEC_DEPS) - $(MKBINUTILSSPEC) -cfg $(top_builddir)/setup.cache -o . sparc-rtems - -TEMPLATES = binutils.spec.in - -RPM_SPECS_DATA = sparc-rtems-$(BINUTILSVERS).spec - -noinst_DATA = $(TEMPLATES) - -EXTRA_DIST = $(TEMPLATES) - -CLEANFILES = $(RPM_SPECS_DATA) -include $(top_srcdir)/../automake/local.am Index: binutils/binutils.spec.in =================================================================== --- binutils/binutils.spec.in (revision 1765) +++ binutils/binutils.spec.in (nonexistent) @@ -1,197 +0,0 @@ -# -# spec file for binutils package targetting rtems -# -# Copyright (c) 1999 OARCorp, Huntsville, AL -# -# please send bugfixes or comments to joel@OARcorp.com -# - -Vendor: OAR Corporation -Distribution: Linux -Name: @target_alias@-gnat-binutils-collection -Summary: binutils for target @target_alias@ -Group: gnatrtems -Release: @Release@ -License: GPL/LGPL - -Provides: rtems-base-gnat-binutils @target_alias@-gnat-binutils - -Autoreqprov: on -Packager: corsepiu@faw.uni-ulm.de and joel@OARcorp.com -Prefix: /opt - -Version: @binutils_version@ -Source0: ftp://ftp.gnu.org/pub/gnu/binutils/binutils-@binutils_version@.tar.gz -Patch0: binutils-@binutils_version@-rtems-@binutils_patch_version@.diff -# -# The original sources are not included in the source RPM. -# If we included them, then the source RPMs for each target -# would duplicate MBs of source unnecessarily. This is -# a duplication of over 30 MBs of source for each of -# the more than 10 targets it is possible to build. -# -# You can get them yourself from the Internet and copy them to -# your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR). -# Or you can try the ftp options of rpm :-) -# -NoSource: 0 - -%description - -RTEMS is an open source operating system for embedded systems. - -This is binutils sources with patches for RTEMS. - -%package -n rtems-base-gnat-binutils -Summary: base package for rtems binutils -Group: rtems - -%description -n rtems-base-gnat-binutils - -RTEMS is an open source operating system for embedded systems. - -This is the base for binutils regardless of target CPU. - -%package -n @target_alias@-gnat-binutils -Summary: rtems binutils for @target_alias@ -Group: rtems -Requires: rtems-base-gnat-binutils - -%description -n @target_alias@-gnat-binutils - -RTEMS is an open source operating system for embedded systems. - -This is the GNU binutils for RTEMS targetting @target_alias@. - -Authors: --------- - Joel Sherrill (joel@oarcorp.com) - ... - -%prep -# untar the sources inside @target_alias@-gnat-binutils -%setup -c -n @target_alias@-gnat-binutils -a 0 - -%patch0 -p0 - test -d build || mkdir build - -%build - cd build - ../binutils-@binutils_version@/configure --target=@target_alias@ \ - --verbose --prefix=/opt/gnatrtems - - make all - make info - -%install - cd build - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install-info -# A bug in binutils: binutils does not install share/locale -# however it uses it - ../binutils-@binutils_version@/mkinstalldirs \ - $RPM_BUILD_ROOT/opt/gnatrtems/share/locale - -# gzip info files - gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info 2>/dev/null - gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-? 2>/dev/null - - if test -f $RPM_BUILD_ROOT/opt/gnatrtems/info/configure.info.gz; - then -# These common files are only present in binutils >= 2.9.5 - find $RPM_BUILD_ROOT/opt/gnatrtems/info -name 'configure.*' | \ - sed -e "s,^$RPM_BUILD_ROOT,,g" > ../files - else - touch ../files - fi -# These target specific files are only present in binutils >= 2.9.5 - if test -f /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@; - then - echo /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@ > ../files.target - else - touch ../files.target - fi - - - -%post - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test x"$f" != x"" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - -%postun - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test x"$f" != x"" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - -%files -n rtems-base-gnat-binutils -f files -%dir /opt/gnatrtems/info -%doc /opt/gnatrtems/info/dir -%doc /opt/gnatrtems/info/as.info.gz -%doc /opt/gnatrtems/info/as.info-?.gz -%doc /opt/gnatrtems/info/bfd.info.gz -%doc /opt/gnatrtems/info/bfd.info-?.gz -%doc /opt/gnatrtems/info/binutils.info.gz -%doc /opt/gnatrtems/info/binutils.info-?.gz -%doc /opt/gnatrtems/info/ld.info.gz -%doc /opt/gnatrtems/info/ld.info-?.gz -%doc /opt/gnatrtems/info/gasp.info.gz -%doc /opt/gnatrtems/info/standards.info.gz - -%dir /opt/gnatrtems/man -%dir /opt/gnatrtems/man/man1 - -%dir /opt/gnatrtems/include -/opt/gnatrtems/include/bfd.h -/opt/gnatrtems/include/ansidecl.h -/opt/gnatrtems/include/bfdlink.h - -%dir /opt/gnatrtems/lib -/opt/gnatrtems/lib/libbfd* -/opt/gnatrtems/lib/libiberty* -/opt/gnatrtems/lib/libopcodes* - -%dir /opt/gnatrtems/share -%dir /opt/gnatrtems/share/locale - -%files -n @target_alias@-gnat-binutils -f files.target -%doc /opt/gnatrtems/man/man1/@target_alias@-*.1 - -%dir /opt/gnatrtems/bin -/opt/gnatrtems/bin/@target_alias@-addr2line@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ar@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-as@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-c++filt@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-gasp@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ld@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-nm@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-objcopy@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-objdump@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ranlib@exe_ext@ -# readelf is not in older binutils so get it from file list -# /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-size@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-strings@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-strip@exe_ext@ - -%dir /opt/gnatrtems/@target_alias@ -%dir /opt/gnatrtems/@target_alias@/bin -/opt/gnatrtems/@target_alias@/bin/ar@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/as@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/ld@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/nm@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/ranlib@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/strip@exe_ext@ - -%dir /opt/gnatrtems/@target_alias@/lib -/opt/gnatrtems/@target_alias@/lib/ldscripts Index: binutils =================================================================== --- binutils (revision 1765) +++ binutils (nonexistent)
binutils Property changes : Deleted: svn:ignore ## -1,4 +0,0 ## -*.spec -Makefile -Makefile.in -binutils.spec Index: gnatnewlib/Makefile.am =================================================================== --- gnatnewlib/Makefile.am (revision 1765) +++ gnatnewlib/Makefile.am (nonexistent) @@ -1,26 +0,0 @@ -## $Id: Makefile.am,v 1.2 2001-09-27 12:02:53 chris Exp $ - -AUTOMAKE_OPTIONS = foreign 1.4 - -MKGNATNEWLIBSPEC = $(SHELL) $(top_builddir)/mkgnatnewlibspec - -MKGNATNEWLIBSPEC_DEPS = $(top_builddir)/mkgnatnewlibspec gnatnewlib.spec.in \ - $(top_builddir)/setup.cache - -powerpc-rtems-$(GNATNEWLIBVERS).spec: $(MKGNATNEWLIBSPEC_DEPS) - $(MKGNATNEWLIBSPEC) -cfg $(top_builddir)/setup.cache -o . powerpc-rtems - -sparc-rtems-$(GNATNEWLIBVERS).spec: $(MKGNATNEWLIBSPEC_DEPS) - $(MKGNATNEWLIBSPEC) -cfg $(top_builddir)/setup.cache -o . sparc-rtems - -TEMPLATES = gnatnewlib.spec.in - -RPM_SPECS_DATA = powerpc-rtems-$(GNATNEWLIBVERS).spec \ - sparc-rtems-$(GNATNEWLIBVERS).spec - -noinst_DATA = $(TEMPLATES) - -EXTRA_DIST = $(TEMPLATES) - -CLEANFILES = $(RPM_SPECS_DATA) -include $(top_srcdir)/../automake/local.am Index: gnatnewlib/gnatnewlib.spec.in =================================================================== --- gnatnewlib/gnatnewlib.spec.in (revision 1765) +++ gnatnewlib/gnatnewlib.spec.in (nonexistent) @@ -1,401 +0,0 @@ -# -# spec file for building gcc for rtems -# -# Copyright (c) 1999 OARCorp, Huntsville, AL -# -# please send bugfixes or comments to joel@OARcorp.com -# - -Vendor: OAR Corporation -Distribution: Linux -Name: @target_alias@-gnat-newlib -Summary: gnat, gcc, and newlib C Library for @target_alias@. -Group: gnatrtems -Release: @Release@ -License: gcc is GPL/LGPL ; newlib no has restrictions on run-time usage - -Provides: rtems-base-gnat @target_alias@-gnat -Provides: rtems-base-gnat-binutils @target_alias@-gnat-binutils -# Requires: @target_alias@-binutils - -Autoreqprov: on -Packager: corsepiu@faw.uni-ulm.de and joel@OARcorp.com - -Version: gnat@gnat_version@ -Source0: ftp://ftp.gnu.org/pub/gnu/gcc/gcc-@gcc_version@.tar.gz -Source1: ftp://sourceware.cygnus/com/pub/newlib/newlib-@newlib_version@.tar.gz -Source2: ftp://cs.nyu.edu/pub/gnat/gnat-@gnat_version@-src.tar.gz -Source3: ftp://ftp.gnu.org/pub/gnu/binutils/binutils-@binutils_version@.tar.gz -Patch0: gcc-@gcc_version@-rtems-gnat-@gnat_version@-@gcc_patch_version@.diff -Patch1: newlib-@newlib_version@-rtems-@newlib_patch_version@.diff -Patch2: gnat-@gnat_version@-rtems-@gnat_patch_version@.diff -Patch3: binutils-@binutils_version@-rtems-gnat-@gnat_version@-@binutils_patch_version@.diff -# -Buildroot: /tmp - -# -# The original sources are not included in the source RPM. -# If we included them, then the source RPMs for each target -# would duplicate MBs of source unnecessarily. This is -# a duplication of over 30 MBs of source for each of -# the more than 10 targets it is possible to build. -# -# You can get them yourself from the Internet and copy them to -# your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR). -# Or you can try the ftp options of rpm :-) -# -NoSource: 0 -NoSource: 1 -NoSource: 2 -NoSource: 3 - -%description -RTEMS is an open source operating system for embedded systems. - -This is gcc's and newlib C Library's sources with patches for RTEMS. - - The original sources are not included in the source RPM. - If we included them, then the source RPMs for each target - would duplicate MBs of source unnecessarily. This is - a duplication of over 30 MBs of source for each of - the more than 10 targets it is possible to build. - - You can get them yourself from the Internet and copy them to - your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR). - Or you can try the ftp options of rpm :-) - -This version of GNAT/RTEMS RPMs is based on the following: - - + gnat-@gnat_version@-src - + gcc-@gcc_version@ - + newlib-@newlib_version@ - + binutils-@binutils_version@ - -with appropriate patches. - -%package -n rtems-base-gnat -Summary: base package for rtems gnat, gcc, and newlib C Library -Group: rtems - -%description -n rtems-base-gnat - -RTEMS is an open source operating system for embedded systems. - -This is the files for gnat, gcc, and newlib that are shared by all targets. - -%package -n rtems-base-gnat-binutils -Summary: base package for rtems binutils -Group: rtems - -%description -n rtems-base-gnat-binutils - -RTEMS is an open source operating system for embedded systems. - -This is the base for binutils regardless of target CPU. - -%package -n @target_alias@-gnat-binutils -Summary: rtems binutils for @target_alias@ -Group: rtems -Requires: rtems-base-gnat-binutils - -%description -n @target_alias@-gnat-binutils - -RTEMS is an open source operating system for embedded systems. - -This is the GNU binutils for RTEMS targetting @target_alias@. - -%package -n @target_alias@-gnat -Summary: rtems gnat, gcc, and newlib C Library for @target_alias@ -Group: rtems -Requires: @target_alias@-gnat-binutils rtems-base-gnat - -%description -n @target_alias@-gnat -RTEMS is an open source operating system for embedded systems. - -This is gnat, gcc, and newlib C Library for @target_alias@. - -%prep -# untar the sources inside @target_alias@-gnat-newlib -%setup -c -n @target_alias@-gnat-newlib -a 0 -a 1 -a 2 -a 3 - -%patch0 -p0 -%patch1 -p0 -%patch2 -p0 -%patch3 -p0 - - # this 281 needs to be a variable. :( - cd gcc-@gcc_version@ - patch -p0 <../gnat-@gnat_version@-src/src/gcc-281.dif - - mv ../gnat-@gnat_version@-src/src/ada . - - cd ada - touch treeprs.ads a-[es]info.h nmake.ad[bs] - cd ../.. # now back at top - - # Now we should be done patching everything.. build up a source tree - - # this sequence is VERY dependent on the versions involved - # When the gcc gets updated to 2.95.x or newer, this HAS to change. - - mkdir src - cd src - # configure scripts - for f in config config.guess config.sub configure configure.in \ - config-ml.in include install-sh ltconfig ltmain.sh Makefile.in \ - move-if-change mkinstalldirs libiberty - do - # some packages have more configure scripts than others - # our list is inclusive - test -r ../binutils-@binutils_version@/$f && \ - mv ../binutils-@binutils_version@/$f . - done - - # link in gcc - mv ../gcc-@gcc_version@ gcc - - # link in binutils - for f in bfd binutils gas gprof ld opcodes etc - do - mv ../binutils-@binutils_version@/$f . - done - - # link in newlib - mv ../newlib-@newlib_version@/newlib . - cd .. - - # now we have a linked together source tree - test -d build || mkdir build - - -%build - cd build - # after we switch off gcc 2.8.1, configure using gcc not a src directory - # and build binutils separately. - ../src/configure --target=@target_alias@ \ - --with-gnu-as --with-gnu-ld --with-newlib --verbose \ - --prefix=/opt/gnatrtems - - # for now we are building all the languages - # '--enable-languages=c,c++' - -# # This is a hack that is only because gnat still uses gcc 2.8.1 -# test -d ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@ || -# mkdir -p ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@ -# for dir in ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@/include \ -# ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@/sys-include -# do -# test -d ${dir} || mkdir -p ${dir} -# cp ../newlib-@newlib_version@/newlib/libc/sys/rtems/include/limits.h ${dir} -# done - - make CC=gcc CFLAGS="-O2" LANGUAGES="c" all - make CC=gcc CFLAGS="-O2" LANGUAGES="c" info - # must be installed to allow gnat to continue to build - make CC=gcc CFLAGS="-O2" LANGUAGES="c" install install-info - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc CFLAGS="-O2" LANGUAGES="c" install install-info - -# When GNAT uses a gcc that finds the RTEMS limits.h, this will not -# be needed. This should not be needed if the limits.h trick above works. -# cd gcc -# rm -f stmp-multilib -# find . -name "*.a" -print | xargs -e rm -f -# -# make all -# cd .. - -#################### Ada from here down ################### - - # Just so the log shows what directory we are in. - pwd - cd gcc - echo "Starting build of GNAT proper." - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc CFLAGS="-O2" LANGUAGES="c ada" - - echo "Starting build of cross GNAT tools" - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc CFLAGS="-O2 -g" LANGUAGES="c ada" cross-gnattools - - echo "Starting build of ada.all.cross" - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc CFLAGS="-O2" LANGUAGES="c ada" ada.all.cross - - # must have -gnato to pass validation - # may want CC=gcc GNATLIBCFLAGS="-O3" GNATLIBFLAGS="-gnatpgn" gnatliy - # NOTE: gnatlib is not multilib'ed -- serious embedded flaw - echo "Starting build of gnatlib" - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc GNATLIBCFLAGS="-O2 -g" gnatlib - -%install - cd build - # Bug in gcc-2.95.1: It doesn't build this installation directory - # If it doesn't find it, gcc doesn't install @target_alias@/bin/gcc - # ../gcc-@gcc_version@/mkinstalldirs \ - # $RPM_BUILD_ROOT/opt/gnatrtems/@target_alias@/bin - - cd gcc - echo "Starting install of gnat" - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \ - CC=gcc CFLAGS="-O2 -g -gnata -gnatp" LANGUAGES="c ada" install - # GNAT has to be mostly installed to even build itself - - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install-info - - # cd go back to build/ - pwd - cd .. - - # gzip info files - gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info 2>/dev/null - gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-? 2>/dev/null - gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-?? 2>/dev/null - - rm -f dirs ; - echo "%dir /opt/gnatrtems/lib" >> dirs ; - echo "%dir /opt/gnatrtems/lib/gcc-lib" >> dirs ; - echo "%dir /opt/gnatrtems/lib/gcc-lib/@target_alias@" >> dirs ; - - touch ../files - # if test -f $RPM_BUILD_ROOT/opt/gnatrtems/info/configure.info.gz; - # then -# These common files are only present in binutils >= 2.9.5 - # find $RPM_BUILD_ROOT/opt/gnatrtems/info -name 'configure.*' | \ - # sed -e "s,^$RPM_BUILD_ROOT,,g" > ../files - # else - # touch ../files - # fi -# These target specific files are only present in binutils >= 2.9.5 - if test -f /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@; - then - echo /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@ > ../files.target - else - touch ../files.target - fi - - # Collect multilib subdirectories - TGTDIR="$RPM_BUILD_ROOT/opt/gnatrtems/lib/gcc-lib/@target_alias@/@gcc_version@" - find $TGTDIR \ - \( -type d -a ! -path "$TGTDIR/include*" \) -print | \ - sed -e "s,^$RPM_BUILD_ROOT,%dir ,g" >> dirs - - # Collect files to go into different packages - # NOTE: This is left in as a place holder to move the 2.95.x code into. - cp dirs ../files.gcc - - f=`find $TGTDIR ! -type d -print | sed -e "s,^$RPM_BUILD_ROOT,,g"`; - for i in $f; do - case $i in - *) echo "$i" >> ../files.gcc ;; - esac - done - -%files -n rtems-base-gnat-binutils -f files -%dir /opt/gnatrtems/info -# %doc /opt/gnatrtems/info/dir -# %doc /opt/gnatrtems/info/as.info.gz -# %doc /opt/gnatrtems/info/as.info-?.gz -# %doc /opt/gnatrtems/info/bfd.info.gz -# %doc /opt/gnatrtems/info/bfd.info-?.gz -# %doc /opt/gnatrtems/info/binutils.info.gz -# %doc /opt/gnatrtems/info/binutils.info-?.gz -# %doc /opt/gnatrtems/info/ld.info.gz -# %doc /opt/gnatrtems/info/ld.info-?.gz -# %doc /opt/gnatrtems/info/gasp.info.gz -# %doc /opt/gnatrtems/info/standards.info.gz - -%dir /opt/gnatrtems/man -%dir /opt/gnatrtems/man/man1 - -%dir /opt/gnatrtems/include -/opt/gnatrtems/include/bfd.h -/opt/gnatrtems/include/ansidecl.h -/opt/gnatrtems/include/bfdlink.h - -%dir /opt/gnatrtems/lib -/opt/gnatrtems/lib/libbfd* -/opt/gnatrtems/lib/libiberty* -/opt/gnatrtems/lib/libopcodes* - -# %dir /opt/gnatrtems/share -# %dir /opt/gnatrtems/share/locale - -%files -n @target_alias@-gnat-binutils -f files.target -%doc /opt/gnatrtems/man/man1/@target_alias@-*.1 - -%dir /opt/gnatrtems/bin -/opt/gnatrtems/bin/@target_alias@-addr2line@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ar@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-as@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-c++filt@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-gasp@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ld@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-nm@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-objcopy@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-objdump@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-ranlib@exe_ext@ -# readelf is not in older binutils so get it from file list -# /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-size@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-strings@exe_ext@ -/opt/gnatrtems/bin/@target_alias@-strip@exe_ext@ - -%dir /opt/gnatrtems/@target_alias@ -%dir /opt/gnatrtems/@target_alias@/bin -/opt/gnatrtems/@target_alias@/bin/ar@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/as@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/ld@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/nm@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/ranlib@exe_ext@ -/opt/gnatrtems/@target_alias@/bin/strip@exe_ext@ - -%dir /opt/gnatrtems/@target_alias@/lib -/opt/gnatrtems/@target_alias@/lib/ldscripts -%files -n rtems-base-gnat -%dir /opt/gnatrtems/info -# %doc /opt/gnatrtems/info/dir -%doc /opt/gnatrtems/info/cpp.info* -%doc /opt/gnatrtems/info/gcc.info* -%doc /opt/gnatrtems/info/libc.info* -%doc /opt/gnatrtems/info/libm.info* - -# %dir /opt/gnatrtems/man -# %dir /opt/gnatrtems/man/man1 -%doc /opt/gnatrtems/man/man1/cccp.1 -%doc /opt/gnatrtems/man/man1/@target_alias@-gcc.1 - -%dir /opt/gnatrtems/bin -# /opt/gnatrtems/bin/cpp@exe_ext@ -# /opt/gnatrtems/bin/gcov@exe_ext@ -%dir /opt/gnatrtems/include -# /opt/gnatrtems/include/g++-3 - -%files -n @target_alias@-gnat -f files.gcc -/opt/gnatrtems/bin/@target_alias@-gcc@exe_ext@ - -%dir /opt/gnatrtems/lib/gcc-lib/@target_alias@/@gcc_version@/include - -/opt/gnatrtems/@target_alias@ - -%post -n @target_alias@-gnat - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test -n "$f" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - -%postun -n @target_alias@-gnat - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test -n "$f" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - Index: gnatnewlib =================================================================== --- gnatnewlib (revision 1765) +++ gnatnewlib (nonexistent)
gnatnewlib Property changes : Deleted: svn:ignore ## -1,4 +0,0 ## -*.spec -Makefile -Makefile.in -gnatnewlib.spec Index: gdb/Makefile.am =================================================================== --- gdb/Makefile.am (revision 1765) +++ gdb/Makefile.am (nonexistent) @@ -1,27 +0,0 @@ -## -## $Id: Makefile.am,v 1.2 2001-09-27 12:02:53 chris Exp $ -## - -AUTOMAKE_OPTIONS = foreign 1.4 - -MKGDBSPEC = $(SHELL) $(top_builddir)/mkgdbspec - -MKGDBSPEC_DEPS = $(top_builddir)/mkgdbspec gdb.spec.in \ - $(top_builddir)/setup.cache - -powerpc-rtems-$(GDBVERS).spec: $(MKGDBSPEC_DEPS) - $(MKGDBSPEC) -cfg $(top_builddir)/setup.cache -o . powerpc-rtems - -sparc-rtems-$(GDBVERS).spec: $(MKGDBSPEC_DEPS) - $(MKGDBSPEC) -cfg $(top_builddir)/setup.cache -o . sparc-rtems - -TEMPLATES = gdb.spec.in - -RPM_SPECS_DATA = powerpc-rtems-$(GDBVERS).spec sparc-rtems-$(GDBVERS).spec - -noinst_DATA = $(TEMPLATES) - -EXTRA_DIST = $(TEMPLATES) - -CLEANFILES = $(RPM_SPECS_DATA) -include $(top_srcdir)/../automake/local.am Index: gdb/gdb.spec.in =================================================================== --- gdb/gdb.spec.in (revision 1765) +++ gdb/gdb.spec.in (nonexistent) @@ -1,151 +0,0 @@ -# -# spec file for package rtems -# -# Copyright (c) 1999 OARCorp, Huntsville, AL -# -# please send bugfixes or comments to joel@OARcorp.com -# - -# neededforbuild -- nothing - -Vendor: OAR Corporation -Distribution: Linux -Name: @target_alias@-gnat-gdb-collection -Release: @Release@ -License: GPL/LGPL -Group: gnatrtems -Provides: rtems-base-gnat-gdb @target_alias@-gnat-gdb - -Autoreqprov: on -Packager: corsepiu@faw.uni-ulm.de and joel@OARcorp.com - -Version: @gdb_version@ -Summary: gdb for target @target_alias@ -Source0: ftp://ftp.gnu.org/pub/gnu/gdb-@gdb_version@.tar.gz -Source1: ftp://cs.nyu.edu/pub/gnat/gnat-@gnat_version@-src.tar.gz -Patch0: gdb-@gdb_version@-rtems-gnat-@gnat_version@-@gdb_patch_version@.diff -Buildroot: /tmp - -# -# The original sources are not included in the source RPM. -# If we included them, then the source RPMs for each target -# would duplicate MBs of source unnecessarily. This is -# a duplication of over 30 MBs of source for each of -# the more than 10 targets it is possible to build. -# -# You can get them yourself from the Internet and copy them to -# your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR). -# Or you can try the ftp options of rpm :-) -# -NoSource: 0 - -%description -RTEMS is an open source operating system for embedded systems. - -This is the GNU gdb for RTEMS targetting @target_alias@. - -%package -n rtems-base-gnat-gdb -Summary: base package for rtems gdb -Group: rtems - -%description -n rtems-base-gnat-gdb - -RTEMS is an open source operating system for embedded systems. - -This is the base for gdb regardless of target CPU. - -%package -n @target_alias@-gnat-gdb -Summary: rtems gdb for @target_alias@ -Group: rtems -Requires: rtems-base-gnat-gdb - -%description -n @target_alias@-gnat-gdb - -RTEMS is an open source operating system for embedded systems. - -This is the GNU gdb for RTEMS targetting @target_alias@. - -Authors: --------- - Joel Sherrill (joel@oarcorp.com) - ... - - -%prep -echo RPM_BUILD_ROOT=${RPM_BUILD_ROOT} -# untar the sources inside @target_alias@-gnat-gdb -%setup -c -n @target_alias@-gnat-gdb -a 0 -a 1 - - cd gdb-@gdb_version@ - patch -p0 <../gnat-@gnat_version@-src/src/gdb-@gdb_version@.gnat.diff - -%patch0 -p1 - -%build -test -d build || mkdir build - cd build - ../gdb-@gdb_version@/configure --target=@target_alias@ \ - --verbose --prefix=/opt/gnatrtems @extra_configure_arguments@ - - make CC=gcc CFLAGS="-O2 -g -DRTEMS_TARGET" all - make info - -%install - cd build - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install - make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install-info - - # gzip info files - find $RPM_BUILD_ROOT/opt/gnatrtems/info -name "*.info*" | \ - grep -v "\.gz$" | xargs -e gzip -f 2>/dev/null - # gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info 2>/dev/null - # gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-? 2>/dev/null - # gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-?? 2>/dev/null - -%post - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test -n "$f" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - -%postun - if test -d $RPM_INSTALL_PREFIX/rtems/info; - then - rm -f $RPM_INSTALL_PREFIX/rtems/info/dir - f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'` - test -n "$f" && for i in $f; do - install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir - done - fi - -%files -n rtems-base-gnat-gdb - -%dir /opt/gnatrtems/info -%doc /opt/gnatrtems/info/gdb.info* -%doc /opt/gnatrtems/info/mmalloc.info* -# %doc /opt/gnatrtems/info/readline.info* - -%dir /opt/gnatrtems/man -%dir /opt/gnatrtems/man/man1 - -%dir /opt/gnatrtems/include -# We install libbfd from binutils -# /opt/gnatrtems/include/bfd.h -# /opt/gnatrtems/include/bfdlink.h - -%dir /opt/gnatrtems/lib -# We install libbfd from binutils -# /opt/gnatrtems/lib/libbfd* -# We use libiberty from gcc -# /opt/gnatrtems/lib/libiberty* - -%files -n @target_alias@-gnat-gdb -%doc /opt/gnatrtems/man/man1/@target_alias@-gdb.1 - -%dir /opt/gnatrtems/bin -/opt/gnatrtems/bin/@target_alias@-gdb@exe_ext@ - Index: gdb =================================================================== --- gdb (revision 1765) +++ gdb (nonexistent)
gdb Property changes : Deleted: svn:ignore ## -1,4 +0,0 ## -*.spec -Makefile -Makefile.in -gdb.spec Index: README =================================================================== --- README (revision 1765) +++ README (nonexistent) @@ -1,28 +0,0 @@ -# -# $Id: README,v 1.2 2001-09-27 12:02:52 chris Exp $ -# - -This directory contains the scripts used to build RPMS for GNAT/RTEMS. - -The scripts are close but do not work completely right yet. I have -commented out the info related items in gnatnewlib.in to get the -RPMS to build. - -The binutils directory should be ignored for now. In order to -build the toolset at all, I had to merge building binutils -into the build of gcc, gnat, and newlib. gdb is still built separately. -When gnat is based off a more recent gcc version, we can go -to the more proper method of building binutils first and -separately. - -There is the more general issue that the gcc 2.8.1 RTEMS targets -were not always the same object format that the gcc 2.95.x ones -are. Thus some BSPs (m68k and i386 in particular) are now ELF -based and assume crti.o/crtn.o is installed. The gcc 2.8.1 -configurations were not ELF and thus it is likely that programs -will not link on certain configurations. - -Another more general issue is that GNAT gdb support is at -4.17 while remote debugging of RTEMS applications via -TCP/IP is in 4.18. - Index: TODO =================================================================== --- TODO (revision 1765) +++ TODO (nonexistent) @@ -1,6 +0,0 @@ -# -# $Id: TODO,v 1.2 2001-09-27 12:02:52 chris Exp $ -# - -There is plenty left to do on this :) - Index: Makefile.am =================================================================== --- Makefile.am (revision 1765) +++ Makefile.am (nonexistent) @@ -1,25 +0,0 @@ -## -## $Id: Makefile.am,v 1.2 2001-09-27 12:02:52 chris Exp $ -## - -AUTOMAKE_OPTIONS = foreign 1.4 -ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal - -SUBDIRS = . gnatnewlib gdb - -noinst_SCRIPTS = setup buildall mkbinutilspec mkbspspec mkgnatnewlibspec \ - mkgdbspec mkrpms mkspec - -TEMPLATES = - -noinst_DATA = setup.def $(TEMPLATES) - -EXTRA_DIST = $(noinst_DATA) $(noinst_SCRIPTS) - -CONFIGURE_DEPENDENCIES = setup.cache -setup.cache: setup.def - cp setup.def $@ - -DISTCLEANFILES = setup.cache -include $(top_srcdir)/../automake/subdirs.am -include $(top_srcdir)/../automake/local.am Index: mkspec =================================================================== --- mkspec (revision 1765) +++ mkspec (nonexistent) @@ -1,19 +0,0 @@ -#!/bin/sh -# - -RTEMS_DIR=`dirname $0` -RTEMS_VERSION=`grep Version ${RTEMS_DIR}/../VERSION | \ -sed -e 's%RTEMS[ ]*Version[ ]*\(.*\)[ ]*%\1%g'` - -target_alias=$1 -bsp=$2 -release=0 - -#${RTEMS_DIR}/scripts/mkbspspec $bsp $target_alias -#${RTEMS_DIR}/scripts/mkbinutilspec $target_alias -#${RTEMS_DIR}/scripts/mkgnatnewlibspec $target_alias -#${RTEMS_DIR}/scripts/mkgdbspec $target_alias -./mkbinutilspec $target_alias -./mkgnatnewlibspec $target_alias -./mkgdbspec $target_alias - Index: mkbspspec.in =================================================================== --- mkbspspec.in (revision 1765) +++ mkbspspec.in (nonexistent) @@ -1,62 +0,0 @@ -#!/bin/sh -# - -RTEMS_DIR=`dirname $0`/@top_srcdir@ -RTEMS_VERSION=@RTEMS_VERSION@ - -CFG=setup.cache -dst=@RPM_SPECSdir@ -exe_ext=@EXEEXT@ - -usage() -{ - echo "$0 [options] " - echo " options:" - echo " -cfg " - echo " -o " - exit 1 ; -} - -while test $# -ge 3; do -case $1 in --cfg) - shift - CFG=$1 - shift - ;; --o) - shift - dst=$1 - shift - ;; --*) - echo "invalid option $1"; - usage - ;; -esac -done - -if test ! $# -eq 2; -then - echo "Invalid number of arguments" - usage -fi - -# target to build for -target_alias=$1 -bsp=$2 - -. ./$CFG - -specfile=${dst}/${target_alias}-gnat-${bsp}-${rtems_version}.spec - -sed -e "s%@Release@%${rtems_rpm_release}%g" \ - -e "s%@bsp@%${bsp}%g" \ - -e "s%@rtems_version@%${rtems_version}%g" \ - -e "s%@rpm_build_root@%${rpm_build_root}%g" \ - -e "s%@target_alias@%${target_alias}%g" \ - -e "s%@exe_ext@%${exe_ext}%g" \ -< ${RTEMS_DIR}/rtems/rtems.spec.in \ -> ${specfile} - -echo Generated ${specfile} Index: setup.def =================================================================== --- setup.def (revision 1765) +++ setup.def (nonexistent) @@ -1,18 +0,0 @@ -# RTEMS tools setup -binutils_version=2.9.1 -binutils_patch_version=20000429 -binutils_rpm_release=2 -newlib_version=1.8.2 -newlib_patch_version=20000606 -gcc_version=2.8.1 -gcc_patch_version=20000429 -gnat_version=3.12p -gnat_patch_version=20000429 -gnatnewlib_rpm_release=5 -gdb_version=4.17 -gdb_patch_version=20000429 -gdb_rpm_release=2 -# RTEMS version is unused as RTEMS RPMS are not currently built. -rtems_version=4.5.0 -rtems_rpm_release=1 -rpm_build_root=/tmp Index: buildall.in =================================================================== --- buildall.in (revision 1765) +++ buildall.in (nonexistent) @@ -1,193 +0,0 @@ -#! /bin/sh -# -# Generate all the specs and then cycle through building them. -# - -RTEMS_DIR=`dirname $0` -CFG=./setup.cache -dst=@RPM_SPECSdir@ - -usage() -{ - echo "$0 [options] " - echo " options:" - echo " -cfg " - echo " -o " - exit 1 ; -} - -while test $# -ge 1; do - case $1 in - -cfg) - test $# -ge 2 || usage - shift - CFG=$1 - shift - ;; - -o) - test $# -ge 2 || usage - shift - dst=$1 - shift - ;; - -*) - echo "invalid option $1"; - usage - ;; - *) - TARGETS="${TARGETS} $1" - shift - ;; - esac -done - -# This is the full list .. hppa1.1 does not build now. -#ALL_TARGETS="hppa1.1-rtems i386-rtems i960-rtems m68k-rtems \ -# m68k-rtemself mips64orion-rtems \ -# powerpc-rtems sh-rtems sh-rtemself sparc-rtems" - -# This is the full buildable set. -if [ "X${TARGETS}" = "X" ] ; then - TARGETS="i386-rtems i960-rtems m68k-rtems \ - mips64orion-rtems powerpc-rtems sh-rtems sparc-rtems" -fi - -. $CFG - -binutils=${binutils_version} -gcc=${gcc_version} -gnat=${gnat_version} -gdb=${gdb_version} -newlib=${newlib_version} -# also use binutils_rpm_release -buildroot=/tmp - -testing=no -do_binutils=no # binutils included in gnatnewlib -do_gnatnewlib=yes -do_gdb=yes - -# -# Now get started -# -start=`date` - -echo PATH=$PATH - -if [ ${testing} = yes ] ; then - ECHO=echo -fi - -installed_count=`rpm -q -g gnatrtems | wc -l` -if [ ${installed_count} -ne 0 ] ; then - echo This script should be run with NO rtems RPMs installed. - echo It appears that the following rtems RPMs are installed: - echo - rpm -qa | grep rtems - echo - echo Please remove these and restart this script. - exit 1 -fi - -echo Copying specs files. -if [ ${testing} = no ] ; then - cd ${RTEMS_DIR} - - # ./configure || exit 1 - make || exit 1 - - # Now generate all the specs - for target in ${TARGETS} - do - tspecs=`find . -name "${target}*"` - if [ "X${tspecs}" = "X" ] ; then - echo RPM specifications were not generated for ${tspec}. - exit 1 - fi - ${ECHO} cp -r ${tspecs} ${dst} - done -fi - -# clean up a bit before we start -cd ${dst} -test -d log || mkdir log - -# do all the tools -for target in ${TARGETS} -do - if [ ${do_binutils} = yes ] ; then - logfile=log/${target}-binutils - specfile=${dst}/${target}-gnat-${gnat}-binutils-${binutils}.spec - echo "rpm -ba ${specfile} >${logfile} 2>&1" - if [ ${testing} = no ] ; then - rpm -ba ${specfile} >${logfile} 2>&1 - fi - ${ECHO} rm -rf ${dst}/../BUILD/${target}-binutils* - ${ECHO} rm -rf ${buildroot}/opt/gnatrtems - else - echo Skipping binutils for ${target} - fi - - # - # build gcc/newlib - # - - if [ ${do_gnatnewlib} = yes ] ; then - # now build gcc/newlib - # NOTE: This requires having binutils installed and we immediately - # remove it once finished. - # base_binutils_rpm=${dst}/../RPMS/i386/rtems-base-binutils-${binutils}-${binutils_rpm_release}.i386.rpm - # binutils_rpm=${dst}/../RPMS/i386/${target}-binutils-${binutils}-${binutils_rpm_release}.i386.rpm - # if [ ! -f ${binutils_rpm} ] ; then - # echo There is no RPM for binutils for ${target}. - # echo Looked for ${binutils_rpm}. - # fi - # ${ECHO} rpm -i ${base_binutils_rpm} - # ${ECHO} rpm -i ${binutils_rpm} - - logfile=log/${target}-gnatnewlib - specfile=${dst}/${target}-gnat-${gnat}-newlib-${newlib}.spec - echo "rpm -ba ${specfile} >${logfile} 2>&1" - if [ ${testing} = no ] ; then - rpm -ba ${specfile} >${logfile} 2>&1 - fi - ${ECHO} rm -rf ${dst}/../BUILD/${target}-gcc* - ${ECHO} rm -rf ${buildroot}/opt/gnatrtems - - # echo uninstalling binutils for ${target} - # if [ ${testing} = no ] ; then - # rpm -e `rpm -qa | grep rtems` - # rm -rf /opt/gnatrtems/* - # fi - else - echo Skipping gcc/newlib for ${target} - fi - - # - # build gdb - # - - if [ ${do_gdb} = yes ] ; then - # now build gdb - logfile=log/${target}-gdb - specfile=${dst}/${target}-gnat-${gnat}-gdb-${gdb}.spec - echo "rpm -ba ${specfile} >${logfile} 2>&1" - if [ ${testing} = no ] ; then - rpm -ba ${specfile} >${logfile} 2>&1 - fi - ${ECHO} rm -rf ${dst}/../BUILD/${target}-gdb* - ${ECHO} rm -rf ${buildroot}/opt/gnatrtems - else - echo Skipping gdb for ${target} - fi - -done - -# Now we are done - -stop=`date` - -echo -echo "Started: " $start -echo "Finished: " $stop -exit 0 Index: setup =================================================================== --- setup (revision 1765) +++ setup (nonexistent) @@ -1,104 +0,0 @@ -#!/bin/bash - -CFG=setup.cache - -# RTEMS tools setup - -if test ! -f ./$CFG; -then - echo -n "restoring default setup.cache .." - cp ./setup.def ./$CFG - echo " done" -fi - -echo -n "loading setup from ./$CFG .." -. ./$CFG -echo " done" -echo - -menu_setup() -{ -while true; -do - echo - echo " GNAT/RTEMS Source packages setup" - echo - echo "0 binutils version : $binutils_version" - echo "1 binutils patch version : $binutils_patch_version" - echo "2 binutils rpm release : $binutils_rpm_release" - echo "3 gcc version : $gcc_version" - echo "4 gcc patch version : $gcc_patch_version" - echo "5 gnat version : $gnat_version" - echo "6 gnat patch version : $gnat_patch_version" - echo "7 newlib version : $newlib_version" - echo "8 newlib patch version : $newlib_patch_version" - echo "9 gnat/newlib rpm release : $gnatnewlib_rpm_release" - echo "a gdb version : $gdb_version" - echo "b gdb patch version : $gdb_patch_version" - echo "c gdb rpm release : $gdb_rpm_release" - echo "d rtems version : $rtems_version" - echo "e rtems rpm release : $rtems_rpm_release" - echo "f rpm build root : $rpm_build_root" - echo - - echo -n "[0-9a-f] or any other key to quit >" - read sel - case $sel in - 0) echo -n "BINUTILS source >" ; read binutils_version ;; - 1) echo -n "BINUTILS patch version >" ; read binutils_patch_version ;; - 2) echo -n "BINUTILS RPM release >" ; read binutils_rpm_release ;; - 3) echo -n "GCC source >" ; read gcc_version ;; - 4) echo -n "GCC patch version>" ; read gcc_patch_version ;; - 5) echo -n "GNAT source >" ; read gnat_version ;; - 6) echo -n "GNAT patch version>" ; read gnat_patch_version ;; - 7) echo -n "NEWLIB source >" ; read newlib_version ;; - 8) echo -n "NEWLIB patch version>" ; read newlib_patch_version ;; - 9) echo -n "GNAT/NEWLIB RPM release >" ; read gnatnewlib_rpm_release ;; - a) echo -n "GDB source >" ; read gdb_version ;; - b) echo -n "GDB patch version>" ; read gdb_patch_version ;; - c) echo -n "GDB RPM release >" ; read gdb_rpm_release ;; - d) echo -n "RTEMS source >" ; read rtems_version ;; - e) echo -n "RTEMS RPM release >" ; read rtems_rpm_release ;; - f) echo -n "RPM build root >" ; read rpm_build_root ;; - *) - return 0 ;; - esac -done -} - - -save_setup() -{ -echo -n "saving setup to $CFG .." - -echo "# RTEMS tools setup" > $CFG -echo "binutils_version=$binutils_version" >> $CFG -echo "binutils_patch_version=$binutils_patch_version" >> $CFG -echo "binutils_rpm_release=$binutils_rpm_release" >> $CFG -echo "newlib_version=$newlib_version" >> $CFG -echo "newlib_patch_version=$newlib_patch_version" >> $CFG -echo "gcc_version=$gcc_version" >> $CFG -echo "gcc_patch_version=$gcc_patch_version" >> $CFG -echo "gnat_version=$gnat_version" >> $CFG -echo "gnat_patch_version=$gnat_patch_version" >> $CFG -echo "gnatnewlib_rpm_release=$gnatnewlib_rpm_release" >> $CFG -echo "gdb_version=$gdb_version" >> $CFG -echo "gdb_patch_version=$gdb_patch_version" >> $CFG -echo "gdb_rpm_release=$gdb_rpm_release" >> $CFG -echo "rtems_version=$rtems_version" >> $CFG -echo "rtems_rpm_release=$rtems_rpm_release" >> $CFG -echo "rpm_build_root=$rpm_build_root" >> $CFG - -echo " done" -test -f Makefile || ./configure -} - -menu_setup - -echo -echo -n "Save setup [y|n] >" -read sel -case $sel in -''|y*|Y*) save_setup ;; -*) ;; -esac
setup Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: mkgnatnewlibspec.in =================================================================== --- mkgnatnewlibspec.in (revision 1765) +++ mkgnatnewlibspec.in (nonexistent) @@ -1,75 +0,0 @@ -#!/bin/sh -# -# Usage: mktoolspec CPU -# - -RTEMS_DIR=`dirname $0`/@top_srcdir@ - -CFG=setup.cache -dst=@RPM_SPECSdir@ -exe_ext=@EXEEXT@ - -usage() -{ - echo "$0 [options] " - echo " options:" - echo " -cfg " - echo " -o " - exit 1 ; -} - -specsrc=${RTEMS_DIR}/gnatnewlib/gnatnewlib.spec.in - -while test $# -ge 2; do -case $1 in --cfg) - shift - CFG=$1 - shift - ;; --o) - shift - dst=$1 - shift - ;; --a) # alternate specs file - shift - specsrc=$1 - shift - ;; --*) - echo "invalid option $1"; - usage - ;; -esac -done - -if test ! $# -eq 1; -then - echo "Invalid number of arguments" - usage -fi - -# target to build for -target_alias=$1 - -. ./$CFG - -specfile=${dst}/${target_alias}-gnat-${gnat_version}-newlib-${newlib_version}.spec - -sed -e "s%@Release@%${gnatnewlib_rpm_release}%g" \ - -e "s%@target_alias@%${target_alias}%g" \ - -e "s%@rpm_build_root@%${rpm_build_root}%g" \ - -e "s%@binutils_version@%${binutils_version}%g" \ - -e "s%@binutils_patch_version@%${binutils_patch_version}%g" \ - -e "s%@gcc_version@%${gcc_version}%g" \ - -e "s%@gcc_patch_version@%${gcc_patch_version}%g" \ - -e "s%@gnat_version@%${gnat_version}%g" \ - -e "s%@gnat_patch_version@%${gnat_patch_version}%g" \ - -e "s%@newlib_version@%${newlib_version}%g" \ - -e "s%@newlib_patch_version@%${newlib_patch_version}%g" \ - -e "s%@exe_ext@%${exe_ext}%g" \ -< ${specsrc} \ -> ${specfile} - -echo Generated ${specfile}. Index: mkgdbspec.in =================================================================== --- mkgdbspec.in (revision 1765) +++ mkgdbspec.in (nonexistent) @@ -1,90 +0,0 @@ -#!/bin/sh -# -# Usage: mkgdbspec CPU -# - -RTEMS_DIR=`dirname $0`/@top_srcdir@ - -CFG=setup.cache -dst=@RPM_SPECSdir@ -exe_ext=@EXEEXT@ - -usage() -{ - echo "$0 [options] " - echo " options:" - echo " -cfg " - echo " -o " - exit 1 ; -} - -while test $# -ge 2; do -case $1 in --cfg) - shift - CFG=$1 - shift - ;; --o) - shift - dst=$1 - shift - ;; --*) - echo "invalid option $1"; - usage - ;; -esac -done - -if test ! $# -eq 1; -then - echo "Invalid number of arguments" - usage -fi - -# target to build for -target_alias=$1 - -. ./$CFG - -specfile=${dst}/${target_alias}-gnat-${gnat_version}-gdb-${gdb_version}.spec - -case ${target_alias} in - powerpc*) - extra_configure_arguments="--enable-sim --enable-sim-powerpc --enable-sim-timebase --enable-sim-hardware" - # Enabling this causes the program image to be huge and causes - # some gcc/hosts combinations to run out of memory. - # --enable-sim-inline - ;; - sparc*) - extra_configure_arguments="--enable-sim" - ;; - *) - ;; -esac - -sed -e "s%@Release@%${gdb_rpm_release}%g" \ - -e "s%@rpm_build_root@%${rpm_build_root}%g" \ - -e "s%@target_alias@%${target_alias}%g" \ - -e "s%@gdb_version@%${gdb_version}%g" \ - -e "s%@gdb_patch_version@%${gdb_patch_version}%g" \ - -e "s%@gnat_version@%${gnat_version}%g" \ - -e "s%@gnat_patch_version@%${gnat_patch_version}%g" \ - -e "s%@extra_configure_arguments@%${extra_configure_arguments}%g" \ - -e "s%@exe_ext@%${exe_ext}%g" \ -< ${RTEMS_DIR}/gdb/gdb.spec.in \ -> ${specfile} - -case ${target_alias} in - powerpc*) - echo "/opt/gnatrtems/bin/${target_alias}-run${exe_ext}" - ;; - sparc*) - echo "/opt/gnatrtems/bin/${target_alias}-run${exe_ext}" - echo "/opt/gnatrtems/bin/${target_alias}-sis${exe_ext}" - ;; - *) ;; -esac >> ${specfile} - -echo Generated ${specfile} Index: mkrpms =================================================================== --- mkrpms (revision 1765) +++ mkrpms (nonexistent) @@ -1,32 +0,0 @@ -#!/bin/sh - -# -# A simple shell script to build several rpms in a row. -# -# Used for testing rtems.spec.in -# - -# Some linux distributions use /usr/src/packages -# redhat uses /usr/src/redhat -# others might use /usr/src -if test -d /usr/src/packages/SPECS; -then -dst=/usr/src/packages/SPECS; -elif test -d /usr/src/redhat/SPECS; - then -dst=/usr/src/redhat/SPECS; -elif test -d /usr/src/SPECS/; -then -dst=/usr/src/SPECS; -fi - -./mkspec pc386 i386-rtems -rpm -ba $dst/rtems-i386-rtems-pc386.spec - -./mkspec gensh1 sh-rtemself -rpm -ba $dst/rtems-sh-rtemself-gensh1.spec - -./mkspec mcp750 powerpc-rtems -rpm -ba $dst/rtems-powerpc-rtems-mcp750.spec - - Index: missing =================================================================== --- missing (revision 1765) +++ missing (nonexistent) @@ -1,190 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. -# Franc,ois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -case "$1" in - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - - aclocal) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`configure.in'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`configure.in'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`configure.in'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0
missing Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: mkbinutilspec.in =================================================================== --- mkbinutilspec.in (revision 1765) +++ mkbinutilspec.in (nonexistent) @@ -1,62 +0,0 @@ -#!/bin/sh -# -# Usage: mkbinutilspec CPU -# - -RTEMS_DIR=`dirname $0`/@top_srcdir@ - -CFG=setup.cache -dst=@RPM_SPECSdir@ -exe_ext=@EXEEXT@ - -usage() -{ - echo "$0 [options] " - echo " options:" - echo " -cfg " - echo " -o " - exit 1 ; -} - -while test $# -ge 2; do -case $1 in --cfg) - shift - CFG=$1 - shift - ;; --o) - shift - dst=$1 - shift - ;; --*) - echo "invalid option $1"; - usage - ;; -esac -done - -if test ! $# -eq 1; -then - echo "Invalid number of arguments" - usage -fi - -# target to build for -target_alias=$1 - -. ./$CFG - -specfile=${dst}/${target_alias}-gnat-${gnat_version}-binutils-${binutils_version}.spec - -sed -e "s%@Release@%${binutils_rpm_release}%g" \ - -e "s%@rpm_build_root@%${rpm_build_root}%g" \ - -e "s%@target_alias@%${target_alias}%g" \ - -e "s%@binutils_version@%${binutils_version}%g" \ - -e "s%@binutils_patch_version@%${binutils_patch_version}%g" \ - -e "s%@exe_ext@%${exe_ext}%g" \ -< ${RTEMS_DIR}/binutils/binutils.spec.in \ -> ${specfile} - -echo Generated ${specfile} Index: install-sh =================================================================== --- install-sh (revision 1765) +++ install-sh (nonexistent) @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0
install-sh Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: . =================================================================== --- . (revision 1765) +++ . (nonexistent)
. Property changes : Deleted: svn:ignore ## -1,16 +0,0 ## -Makefile -Makefile.in -aclocal.m4 -buildall -config.cache -config.guess -config.log -config.status -config.sub -configure -depcomp -mkbinutilspec -mkbspspec -mkgdbspec -mkgnatnewlibspec -setup.cache

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.