projects/BtnDemo/xst/work/sub00/vhpl01.vho
Property changes :
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: projects/BtnDemo/xst/work/hdllib.ref
===================================================================
--- projects/BtnDemo/xst/work/hdllib.ref (revision 430)
+++ projects/BtnDemo/xst/work/hdllib.ref (nonexistent)
@@ -1,2 +0,0 @@
-EN btndemo NULL /home/lguanuco/opencores/phr/trunk/codigo/demos/projects/BtnDemo/BtnDemo.vhd sub00/vhpl00 1398896049
-AR btndemo behavioral /home/lguanuco/opencores/phr/trunk/codigo/demos/projects/BtnDemo/BtnDemo.vhd sub00/vhpl01 1398896050
Index: projects/BtnDemo/btndemo.ut
===================================================================
--- projects/BtnDemo/btndemo.ut (revision 430)
+++ projects/BtnDemo/btndemo.ut (nonexistent)
@@ -1,30 +0,0 @@
-
--w
--g DebugBitstream:No
--g Binary:no
--g Gclkdel0:11111
--g Gclkdel1:11111
--g Gclkdel2:11111
--g Gclkdel3:11111
--g ConfigRate:4
--g CclkPin:PullUp
--g M0Pin:PullUp
--g M1Pin:PullUp
--g M2Pin:PullUp
--g ProgPin:PullUp
--g DonePin:PullUp
--g TckPin:PullUp
--g TdiPin:PullUp
--g TdoPin:PullUp
--g TmsPin:PullUp
--g UnusedPin:PullDown
--g UserID:0xFFFFFFFF
--g StartUpClk:JtagClk
--g DONE_cycle:4
--g GTS_cycle:5
--g GSR_cycle:6
--g GWE_cycle:6
--g LCK_cycle:NoWait
--g Security:None
--g DonePipe:No
--g DriveDone:No
Index: projects/BtnDemo/BtnDemo.ptf
===================================================================
--- projects/BtnDemo/BtnDemo.ptf (revision 430)
+++ projects/BtnDemo/BtnDemo.ptf (nonexistent)
@@ -1,4 +0,0 @@
-[btndemo]
-Design Entry Utilities=true
-Generate Programming File=true
-User Constraints=true
Index: projects/BtnDemo/btndemo._prj
===================================================================
--- projects/BtnDemo/btndemo._prj (revision 430)
+++ projects/BtnDemo/btndemo._prj (nonexistent)
@@ -1,2 +0,0 @@
-plslib
-pls BtnDemo.vhd
Index: projects/BtnDemo/btndemo.prj
===================================================================
--- projects/BtnDemo/btndemo.prj (revision 430)
+++ projects/BtnDemo/btndemo.prj (nonexistent)
@@ -1 +0,0 @@
-vhdl work BtnDemo.vhd
Index: projects/BtnDemo/_ngo/netlist.lst
===================================================================
--- projects/BtnDemo/_ngo/netlist.lst (revision 430)
+++ projects/BtnDemo/_ngo/netlist.lst (nonexistent)
@@ -1,2 +0,0 @@
-/home/lguanuco/opencores/phr/trunk/codigo/demos/projects/BtnDemo/BtnDemo.ngc 1398896055
-OK
Index: projects/BtnDemo/BtnDemo_xst.xrpt
===================================================================
--- projects/BtnDemo/BtnDemo_xst.xrpt (revision 430)
+++ projects/BtnDemo/BtnDemo_xst.xrpt (nonexistent)
@@ -1,137 +0,0 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Index: projects/BtnDemo/BtnDemo_envsettings.html
===================================================================
--- projects/BtnDemo/BtnDemo_envsettings.html (revision 430)
+++ projects/BtnDemo/BtnDemo_envsettings.html (nonexistent)
@@ -1,391 +0,0 @@
-
Xilinx System Settings Report
-
-
System Settings
-
-
-
- Environment Settings |
-
-
-Environment Variable |
-xst |
-ngdbuild |
-map |
-par |
-
-
-LD_LIBRARY_PATH |
-/opt/Xilinx/12.3/ISE_DS/ISE//lib/lin |
-/opt/Xilinx/12.3/ISE_DS/ISE//lib/lin |
-< data not available > |
-< data not available > |
-
-
-PATH |
-/opt/Xilinx/12.3/ISE_DS/ISE//bin/lin: /usr/local/bin: /usr/bin: /bin: /usr/local/games: /usr/games |
-/opt/Xilinx/12.3/ISE_DS/ISE//bin/lin: /usr/local/bin: /usr/bin: /bin: /usr/local/games: /usr/games |
-< data not available > |
-< data not available > |
-
-
-XILINX |
-/opt/Xilinx/12.3/ISE_DS/ISE/ |
-/opt/Xilinx/12.3/ISE_DS/ISE/ |
-< data not available > |
-< data not available > |
-
-
-
-
-
-Synthesis Property Settings |
-
-
-Switch Name |
-Property Name |
-Value |
-Default Value |
-
-
--ifn |
- |
-BtnDemo.prj |
- |
-
-
--ifmt |
- |
-mixed |
-MIXED |
-
-
--ofn |
- |
-BtnDemo |
- |
-
-
--ofmt |
- |
-NGC |
-NGC |
-
-
--p |
- |
-xc3s1000-4-fg320 |
- |
-
-
--top |
- |
-BtnDemo |
- |
-
-
--opt_mode |
-Optimization Goal |
-Speed |
-Speed |
-
-
--opt_level |
-Optimization Effort |
-1 |
-1 |
-
-
--iuc |
-Use synthesis Constraints File |
-NO |
-NO |
-
-
--keep_hierarchy |
-Keep Hierarchy |
-No |
-NO |
-
-
--netlist_hierarchy |
-Netlist Hierarchy |
-As_Optimized |
-As_Optimized |
-
-
--rtlview |
-Generate RTL Schematic |
-Yes |
-NO |
-
-
--glob_opt |
-Global Optimization Goal |
-AllClockNets |
-AllClockNets |
-
-
--read_cores |
-Read Cores |
-YES |
-YES |
-
-
--write_timing_constraints |
-Write Timing Constraints |
-NO |
-NO |
-
-
--cross_clock_analysis |
-Cross Clock Analysis |
-NO |
-NO |
-
-
--bus_delimiter |
-Bus Delimiter |
-<> |
-<> |
-
-
--slice_utilization_ratio |
-Slice Utilization Ratio |
-100 |
-100% |
-
-
--bram_utilization_ratio |
-BRAM Utilization Ratio |
-100 |
-100% |
-
-
--verilog2001 |
-Verilog 2001 |
-YES |
-YES |
-
-
--fsm_extract |
- |
-YES |
-YES |
-
-
--fsm_encoding |
- |
-Auto |
-AUTO |
-
-
--safe_implementation |
- |
-No |
-NO |
-
-
--fsm_style |
- |
-LUT |
-LUT |
-
-
--ram_extract |
- |
-Yes |
-YES |
-
-
--ram_style |
- |
-Auto |
-AUTO |
-
-
--rom_extract |
- |
-Yes |
-YES |
-
-
--shreg_extract |
- |
-YES |
-YES |
-
-
--rom_style |
- |
-Auto |
-AUTO |
-
-
--auto_bram_packing |
- |
-NO |
-NO |
-
-
--resource_sharing |
- |
-YES |
-YES |
-
-
--async_to_sync |
- |
-NO |
-NO |
-
-
--mult_style |
- |
-Auto |
-AUTO |
-
-
--iobuf |
- |
-YES |
-YES |
-
-
--max_fanout |
- |
-500 |
-500 |
-
-
--bufg |
- |
-8 |
-8 |
-
-
--register_duplication |
- |
-YES |
-YES |
-
-
--register_balancing |
- |
-No |
-NO |
-
-
--optimize_primitives |
- |
-NO |
-NO |
-
-
--use_clock_enable |
- |
-Yes |
-YES |
-
-
--use_sync_set |
- |
-Yes |
-YES |
-
-
--use_sync_reset |
- |
-Yes |
-YES |
-
-
--iob |
- |
-Auto |
-AUTO |
-
-
--equivalent_register_removal |
- |
-YES |
-YES |
-
-
--slice_utilization_ratio_maxmargin |
- |
-5 |
-0% |
-
-
-
-
-
-Translation Property Settings |
-
-
-Switch Name |
-Property Name |
-Value |
-Default Value |
-
-
--intstyle |
- |
-ise |
-None |
-
-
--dd |
- |
-_ngo |
-None |
-
-
--p |
- |
-xc3s1000-fg320-4 |
-None |
-
-
-
-
-
- Operating System Information |
-
-
-Operating System Information |
-xst |
-ngdbuild |
-map |
-par |
-
-
-CPU Architecture/Speed |
-AMD Athlon(tm) II X2 255 Processor/3100.000 MHz |
-AMD Athlon(tm) II X2 255 Processor/3100.000 MHz |
-< data not available > |
-< data not available > |
-
-
-Host |
-cudar75 |
-cudar75 |
-< data not available > |
-< data not available > |
-
-
-OS Name |
-Debian |
-Debian |
-< data not available > |
-< data not available > |
-
-
-OS Release |
-Debian GNU/Linux 7.4 (wheezy) |
-Debian GNU/Linux 7.4 (wheezy) |
-< data not available > |
-< data not available > |
-
-
-
\ No newline at end of file
Index: projects/BtnDemo/btndemo.ncd
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: projects/BtnDemo/btndemo.ncd
===================================================================
--- projects/BtnDemo/btndemo.ncd (revision 430)
+++ projects/BtnDemo/btndemo.ncd (nonexistent)
projects/BtnDemo/BtnDemo.zip
Property changes :
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: projects/BtnDemo/btndemo_pad.txt
===================================================================
--- projects/BtnDemo/btndemo_pad.txt (revision 430)
+++ projects/BtnDemo/btndemo_pad.txt (nonexistent)
@@ -1,232 +0,0 @@
-Release 6.2.03i - Par G.31a
-Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.
-
-Wed Jul 07 09:50:35 2004
-
-
-INPUT FILE: btndemo_map.ncd
-OUTPUT FILE: btndemo_pad.txt
-PART TYPE: xc2s200
-SPEED GRADE: -5
-PACKAGE: pq208
-
-Pinout by Pin Number:
-
------ |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |
-Pin Number|Signal Name|Pin Usage|Pin Name |Direction|IO Standard|IO Bank Number|Drive (mA)|Slew Rate|Termination|IOB Delay|Voltage|Constraint|
-P1 | | |GND | | | | | | | | | |
-P2 | | |TMS | | | | | | | | | |
-P3 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P4 | |IOB |IO_VREF_7 |UNUSED | |(0,7)*** | | | | | | |
-P5 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P6 | |IOB |IO_VREF_7 |UNUSED | |(0,7)*** | | | | | | |
-P7 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P8 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P9 | |IOB |IO_VREF_7 |UNUSED | |(0,7)*** | | | | | | |
-P10 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P11 | | |GND | | | | | | | | | |
-P12 | | |VCCO | | |0 | | | | |na | |
-P13 | | |VCCINT | | | | | | | |2.5 | |
-P14 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P15 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P16 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P17 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P18 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P19 | | |GND | | | | | | | | | |
-P20 | |IOB |IO_VREF_7 |UNUSED | |(0,7)*** | | | | | | |
-P21 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P22 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P23 | |IOB | |UNUSED | |(0,7)*** | | | | | | |
-P24 | |PCIIOB |IO_IRDY |UNUSED | |(0,7)*** | | | | | | |
-P25 | | |GND | | | | | | | | | |
-P26 | | |VCCO | | |0 | | | | |na | |
-P27 | |PCIIOB |IO_TRDY |UNUSED | |(0,6)*** | | | | | | |
-P28 | | |VCCINT | | | | | | | |2.5 | |
-P29 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P30 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P31 | |IOB |IO_VREF_6 |UNUSED | |(0,6)*** | | | | | | |
-P32 | | |GND | | | | | | | | | |
-P33 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P34 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P35 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P36 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P37 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P38 | | |VCCINT | | | | | | | |2.5 | |
-P39 | | |VCCO | | |0 | | | | |na | |
-P40 | | |GND | | | | | | | | | |
-P41 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P42 | |IOB |IO_VREF_6 |UNUSED | |(0,6)*** | | | | | | |
-P43 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P44 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P45 | |IOB |IO_VREF_6 |UNUSED | |(0,6)*** | | | | | | |
-P46 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P47 | |IOB |IO_VREF_6 |UNUSED | |(0,6)*** | | | | | | |
-P48 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P49 | |IOB | |UNUSED | |(0,6)*** | | | | | | |
-P50 | | |M1 | | | | | | | | | |
-P51 | | |GND | | | | | | | | | |
-P52 | | |M0 | | | | | | | | | |
-P53 | | |VCCO | | |0 | | | | |na | |
-P54 | | |M2 | | | | | | | | | |
-P55 | | |NC | | | | | | | | | |
-P56 | | |NC | | | | | | | | | |
-P57 | |IOB |IO_VREF_5 |UNUSED | |(0,5)*** | | | | | | |
-P58 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P59 | |IOB |IO_VREF_5 |UNUSED | |(0,5)*** | | | | | | |
-P60 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P61 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P62 | |IOB |IO_VREF_5 |UNUSED | |(0,5)*** | | | | | | |
-P63 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P64 | | |GND | | | | | | | | | |
-P65 | | |VCCO | | |0 | | | | |na | |
-P66 | | |VCCINT | | | | | | | |2.5 | |
-P67 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P68 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P69 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P70 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P71 |led |IOB | |OUTPUT |LVTTL |(0,5)*** |12 |SLOW |NONE** | | |LOCATED |
-P72 | | |GND | | | | | | | | | |
-P73 | |IOB |IO_VREF_5 |UNUSED | |(0,5)*** | | | | | | |
-P74 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P75 | |IOB | |UNUSED | |(0,5)*** | | | | | | |
-P76 | | |VCCINT | | | | | | | |2.5 | |
-P77 |btn |GCLKIOB |GCK1 |INPUT |LVTTL |(0,5)*** | | | | | |LOCATED |
-P78 | | |VCCO | | |0 | | | | |na | |
-P79 | | |GND | | | | | | | | | |
-P80 | |GCLKIOB |GCK0 |UNUSED | |(0,4)*** | | | | | | |
-P81 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P82 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P83 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P84 | |IOB |IO_VREF_4 |UNUSED | |(0,4)*** | | | | | | |
-P85 | | |GND | | | | | | | | | |
-P86 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P87 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P88 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P89 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P90 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P91 | | |VCCINT | | | | | | | |2.5 | |
-P92 | | |VCCO | | |0 | | | | |na | |
-P93 | | |GND | | | | | | | | | |
-P94 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P95 | |IOB |IO_VREF_4 |UNUSED | |(0,4)*** | | | | | | |
-P96 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P97 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P98 | |IOB |IO_VREF_4 |UNUSED | |(0,4)*** | | | | | | |
-P99 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P100 | |IOB |IO_VREF_4 |UNUSED | |(0,4)*** | | | | | | |
-P101 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P102 | |IOB | |UNUSED | |(0,4)*** | | | | | | |
-P103 | | |GND | | | | | | | | | |
-P104 | | |DONE | | | | | | | | | |
-P105 | | |VCCO | | |0 | | | | |na | |
-P106 | | |PROGRAM | | | | | | | | | |
-P107 | |IOB |IO_INIT |UNUSED | |(0,3)*** | | | | | | |
-P108 | |IOB |IO_D7 |UNUSED | |(0,3)*** | | | | | | |
-P109 | |IOB |IO_VREF_3 |UNUSED | |(0,3)*** | | | | | | |
-P110 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P111 | |IOB |IO_VREF_3 |UNUSED | |(0,3)*** | | | | | | |
-P112 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P113 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P114 | |IOB |IO_VREF_3 |UNUSED | |(0,3)*** | | | | | | |
-P115 | |IOB |IO_D6 |UNUSED | |(0,3)*** | | | | | | |
-P116 | | |GND | | | | | | | | | |
-P117 | | |VCCO | | |0 | | | | |na | |
-P118 | | |VCCINT | | | | | | | |2.5 | |
-P119 | |IOB |IO_D5 |UNUSED | |(0,3)*** | | | | | | |
-P120 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P121 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P122 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P123 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P124 | | |GND | | | | | | | | | |
-P125 | |IOB |IO_VREF_3 |UNUSED | |(0,3)*** | | | | | | |
-P126 | |IOB |IO_D4 |UNUSED | |(0,3)*** | | | | | | |
-P127 | |IOB | |UNUSED | |(0,3)*** | | | | | | |
-P128 | | |VCCINT | | | | | | | |2.5 | |
-P129 | |PCIIOB |IO_TRDY |UNUSED | |(0,3)*** | | | | | | |
-P130 | | |VCCO | | |0 | | | | |na | |
-P131 | | |GND | | | | | | | | | |
-P132 | |PCIIOB |IO_IRDY |UNUSED | |(0,2)*** | | | | | | |
-P133 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P134 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P135 | |IOB |IO_D3 |UNUSED | |(0,2)*** | | | | | | |
-P136 | |IOB |IO_VREF_2 |UNUSED | |(0,2)*** | | | | | | |
-P137 | | |GND | | | | | | | | | |
-P138 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P139 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P140 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P141 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P142 | |IOB |IO_D2 |UNUSED | |(0,2)*** | | | | | | |
-P143 | | |VCCINT | | | | | | | |2.5 | |
-P144 | | |VCCO | | |0 | | | | |na | |
-P145 | | |GND | | | | | | | | | |
-P146 | |IOB |IO_D1 |UNUSED | |(0,2)*** | | | | | | |
-P147 | |IOB |IO_VREF_2 |UNUSED | |(0,2)*** | | | | | | |
-P148 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P149 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P150 | |IOB |IO_VREF_2 |UNUSED | |(0,2)*** | | | | | | |
-P151 | |IOB | |UNUSED | |(0,2)*** | | | | | | |
-P152 | |IOB |IO_VREF_2 |UNUSED | |(0,2)*** | | | | | | |
-P153 | |IOB |IO_DIN_D0 |UNUSED | |(0,2)*** | | | | | | |
-P154 | |IOB |IO_DOUT_BUSY|UNUSED | |(0,2)*** | | | | | | |
-P155 | | |CCLK | | | | | | | | | |
-P156 | | |VCCO | | |0 | | | | |na | |
-P157 | | |TDO | | | | | | | | | |
-P158 | | |GND | | | | | | | | | |
-P159 | | |TDI | | | | | | | | | |
-P160 | |IOB |IO_CS |UNUSED | |(0,1)*** | | | | | | |
-P161 | |IOB |IO_WRITE |UNUSED | |(0,1)*** | | | | | | |
-P162 | |IOB |IO_VREF_1 |UNUSED | |(0,1)*** | | | | | | |
-P163 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P164 | |IOB |IO_VREF_1 |UNUSED | |(0,1)*** | | | | | | |
-P165 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P166 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P167 | |IOB |IO_VREF_1 |UNUSED | |(0,1)*** | | | | | | |
-P168 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P169 | | |GND | | | | | | | | | |
-P170 | | |VCCO | | |0 | | | | |na | |
-P171 | | |VCCINT | | | | | | | |2.5 | |
-P172 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P173 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P174 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P175 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P176 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P177 | | |GND | | | | | | | | | |
-P178 | |IOB |IO_VREF_1 |UNUSED | |(0,1)*** | | | | | | |
-P179 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P180 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P181 | |IOB | |UNUSED | |(0,1)*** | | | | | | |
-P182 | |GCLKIOB |GCK2 |UNUSED | |(0,1)*** | | | | | | |
-P183 | | |GND | | | | | | | | | |
-P184 | | |VCCO | | |0 | | | | |na | |
-P185 | |GCLKIOB |GCK3 |UNUSED | |0 | | | | | | |
-P186 | | |VCCINT | | | | | | | |2.5 | |
-P187 | |IOB | |UNUSED | |0 | | | | | | |
-P188 | |IOB | |UNUSED | |0 | | | | | | |
-P189 | |IOB |IO_VREF_0 |UNUSED | |0 | | | | | | |
-P190 | | |GND | | | | | | | | | |
-P191 | |IOB | |UNUSED | |0 | | | | | | |
-P192 | |IOB | |UNUSED | |0 | | | | | | |
-P193 | |IOB | |UNUSED | |0 | | | | | | |
-P194 | |IOB | |UNUSED | |0 | | | | | | |
-P195 | |IOB | |UNUSED | |0 | | | | | | |
-P196 | | |VCCINT | | | | | | | |2.5 | |
-P197 | | |VCCO | | |0 | | | | |na | |
-P198 | | |GND | | | | | | | | | |
-P199 | |IOB | |UNUSED | |0 | | | | | | |
-P200 | |IOB |IO_VREF_0 |UNUSED | |0 | | | | | | |
-P201 | |IOB | |UNUSED | |0 | | | | | | |
-P202 | |IOB | |UNUSED | |0 | | | | | | |
-P203 | |IOB |IO_VREF_0 |UNUSED | |0 | | | | | | |
-P204 | |IOB | |UNUSED | |0 | | | | | | |
-P205 | |IOB |IO_VREF_0 |UNUSED | |0 | | | | | | |
-P206 | |IOB | |UNUSED | |0 | | | | | | |
-P207 | | |TCK | | | | | | | | | |
-P208 | | |VCCO | | |0 | | | | |na | |
-
------ |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |----- |
-
-* Default value.
-** This default Pullup/Pulldown value can be overridden in Bitgen.
-*** In some smaller packages, the VCCO bank number of a pin may trail
- the VREF bank number (VCCO,VREF).
-
Index: projects/BtnDemo/btndemo.cmd_log
===================================================================
--- projects/BtnDemo/btndemo.cmd_log (revision 430)
+++ projects/BtnDemo/btndemo.cmd_log (nonexistent)
@@ -1,25 +0,0 @@
-xst -quiet -ifn __projnav/btndemo.xst -ofn btndemo.syr
-ngdbuild -quiet -dd f:\engineering\projects\web5.1\d2\btndemo/_ngo -uc btndemo.ucf -insert_keep_hierarchy -p xc2s200-pq208-5 btndemo.ngc btndemo.ngd
-map -quiet -p xc2s200-pq208-5 -cm area -pr b -k 4 -c 100 -tx off -o btndemo_map.ncd btndemo.ngd btndemo.pcf
-par -w -ol 2 -t 1 btndemo_map.ncd btndemo.ncd btndemo.pcf
-trce -quiet -e 3 -l 3 -xml btndemo btndemo.ncd -o btndemo.twr btndemo.pcf
-bitgen -f btndemo.ut btndemo.ncd
-bitgen -f btndemo.ut btndemo.ncd
-xst -quiet -ifn __projnav/btndemo.xst -ofn btndemo.syr
-ngdbuild -quiet -dd e:\engineering\projects\web5.1\d2\btndemo/_ngo -uc btndemo.ucf -insert_keep_hierarchy -p xc2s200-pq208-5 btndemo.ngc btndemo.ngd
-map -quiet -p xc2s200-pq208-5 -cm area -pr b -k 4 -c 100 -tx off -o btndemo_map.ncd btndemo.ngd btndemo.pcf
-par -w -ol 2 -t 1 btndemo_map.ncd btndemo.ncd btndemo.pcf
-trce -quiet -e 3 -l 3 -xml btndemo btndemo.ncd -o btndemo.twr btndemo.pcf
-bitgen -f btndemo.ut btndemo.ncd
-xst -intstyle ise -ifn __projnav/btndemo.xst -ofn btndemo.syr
-ngdbuild -intstyle ise -dd x:\barron\config\d2\basic\btndemo/_ngo -uc btndemo.ucf -p xc2s200-pq208-5 btndemo.ngc btndemo.ngd
-map -intstyle ise -p xc2s200-pq208-5 -cm area -pr b -k 4 -c 100 -tx off -o btndemo_map.ncd btndemo.ngd btndemo.pcf
-par -w -intstyle ise -ol std -t 1 btndemo_map.ncd btndemo.ncd btndemo.pcf
-trce -intstyle ise -e 3 -l 3 -xml btndemo btndemo.ncd -o btndemo.twr btndemo.pcf
-bitgen -intstyle ise -f btndemo.ut btndemo.ncd
-xst -intstyle ise -ifn __projnav/btndemo.xst -ofn btndemo.syr
-ngdbuild -intstyle ise -dd x:\barron\config\d2\basic\btndemo/_ngo -uc btndemo.ucf -p xc2s200-pq208-5 btndemo.ngc btndemo.ngd
-map -intstyle ise -p xc2s200-pq208-5 -cm area -pr b -k 4 -c 100 -tx off -o btndemo_map.ncd btndemo.ngd btndemo.pcf
-par -w -intstyle ise -ol std -t 1 btndemo_map.ncd btndemo.ncd btndemo.pcf
-trce -intstyle ise -e 3 -l 3 -xml btndemo btndemo.ncd -o btndemo.twr btndemo.pcf
-bitgen -intstyle ise -f btndemo.ut btndemo.ncd
Index: projects/BtnDemo/_impact.log
===================================================================
--- projects/BtnDemo/_impact.log (revision 430)
+++ projects/BtnDemo/_impact.log (nonexistent)
@@ -1,60 +0,0 @@
-iMPACT Version: F.23
-iMPACT log file Started on 2003/05/29 12:20:14
-// *** BATCH CMD : setpreference -novice
-// *** BATCH CMD : setpreference -stop_on_failure
-// *** BATCH CMD : setPreference -fixClock
-// *** BATCH CMD : setPreference -PC4_200K
-GUI --- Boundary Scan Mode selected
-// *** BATCH CMD : setMode -bs
-// *** BATCH CMD : setMode -bs
-// *** BATCH CMD : setMode -bs
-GUI --- Auto connect to cable...
-AutoDetecting cable. Please wait.
-CB_PROGRESS_START - Starting Operation.
-Connecting to cable (USB Port).
-Cable connection failed.
-Connecting to cable (Parallel Port - LPT1).
-Checking cable driver.
- Driver Version = 505.
-Cable connection established.
-CB_PROGRESS_END - End Operation.
-Elapsed time = 0 sec.
-// *** BATCH CMD : setCable -port auto
-// *** BATCH CMD : setMode -bs
-// *** BATCH CMD : setMode -bs
-PROGRESS_START - Starting Operation.
-Identifying chain contents ....Identified xc2s200.
-INFO:iMPACT:1366 -
- Reading C:/XilinxISE/spartan2/data\xc2s200.bsd...
- Reading C:/XilinxISE/spartan2/data\xc2s200.bsd...
-INFO:iMPACT:501 - '1': Added Device xc2s200 successfully.
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-done.
-PROGRESS_END - End Operation.
-Elapsed time = 1 sec.
-// *** BATCH CMD : Identify
-'1': Loading file 'E:\Engineering\Projects\web5.1\D2\BtnDemo\btndemo.bit' ...
-done.
-INFO:iMPACT:1366 -
- Reading C:/XilinxISE/spartan2/data\xc2s200.bsd...
- Reading C:/XilinxISE/spartan2/data\xc2s200.bsd...
-INFO:iMPACT:501 - '1': Added Device xc2s200 successfully.
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-// *** BATCH CMD : setAttribute -position 1 -attr configFileName -valueE:\Engineering\Projects\web5.1\D2\BtnDemo\btndemo.bit
-// *** BATCH CMD : setMode -bs
-// *** BATCH CMD : setMode -bs
-PROGRESS_START - Starting Operation.
-Validating chain...
-Boundary-scan chain validated successfully.
-'1':Programming device...done.
-INFO:iMPACT:579 - '1': Completed downloading bit file to device.
-INFO:iMPACT:580 - '1':Checking done pin ....done.
-'1': Programmed successfully.
-PROGRESS_END - End Operation.
-Elapsed time = 8 sec.
-// *** BATCH CMD : Program -p 1
-***** Closing iMPACT program. *****
Index: projects/BtnDemo/bitgen.ut
===================================================================
--- projects/BtnDemo/bitgen.ut (revision 430)
+++ projects/BtnDemo/bitgen.ut (nonexistent)
@@ -1,30 +0,0 @@
-
--w
--g DebugBitstream:No
--g Binary:no
--g Gclkdel0:11111
--g Gclkdel1:11111
--g Gclkdel2:11111
--g Gclkdel3:11111
--g ConfigRate:4
--g CclkPin:PullUp
--g M0Pin:PullUp
--g M1Pin:PullUp
--g M2Pin:PullUp
--g ProgPin:PullUp
--g DonePin:PullUp
--g TckPin:PullUp
--g TdiPin:PullUp
--g TdoPin:PullUp
--g TmsPin:PullUp
--g UnusedPin:PullDown
--g UserID:0xFFFFFFFF
--g StartUpClk:JtagClk
--g DONE_cycle:4
--g GTS_cycle:5
--g GSR_cycle:6
--g GWE_cycle:6
--g LCK_cycle:NoWait
--g Security:None
--g DonePipe:No
--g DriveDone:No
Index: projects/BtnDemo/btndemo.twr
===================================================================
--- projects/BtnDemo/btndemo.twr (revision 430)
+++ projects/BtnDemo/btndemo.twr (nonexistent)
@@ -1,39 +0,0 @@
---------------------------------------------------------------------------------
-Release 6.2.03i Trace G.28
-Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.
-
-C:/Xilinx/bin/nt/trce.exe -intstyle ise -e 3 -l 3 -xml btndemo btndemo.ncd -o
-btndemo.twr btndemo.pcf
-
-
-Design file: btndemo.ncd
-Physical constraint file: btndemo.pcf
-Device,speed: xc2s200,-5 (PRODUCTION 1.27 2003-12-13)
-Report level: error report
-
-Environment Variable Effect
--------------------- ------
-NONE No environment variables were set
---------------------------------------------------------------------------------
-
-INFO:Timing:2698 - No timing constraints found, doing default enumeration.
-INFO:Timing:2752 - To get complete path coverage, use the unconstrained paths
- option. All paths that are not constrained will be reported in the
- unconstrained paths section(s) of the report.
-
-
-Data Sheet report:
------------------
-All values displayed in nanoseconds (ns)
-
-Pad to Pad
----------------+---------------+---------+
-Source Pad |Destination Pad| Delay |
----------------+---------------+---------+
-btn |led | 7.273|
----------------+---------------+---------+
-
-Analysis completed Wed Jul 07 09:50:48 2004
---------------------------------------------------------------------------------
-
-Peak Memory Usage: 47 MB
Index: projects/BtnDemo/btndemo.syr
===================================================================
--- projects/BtnDemo/btndemo.syr (revision 430)
+++ projects/BtnDemo/btndemo.syr (nonexistent)
@@ -1,214 +0,0 @@
-Release 6.2.03i - xst G.31a
-Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.
---> Parameter TMPDIR set to __projnav
-CPU : 0.02 / 2.23 s | Elapsed : 0.00 / 2.00 s
-
---> Parameter xsthdpdir set to ./xst
-CPU : 0.01 / 2.27 s | Elapsed : 0.00 / 2.00 s
-
---> Reading design: btndemo.prj
-
-TABLE OF CONTENTS
- 1) Synthesis Options Summary
- 2) HDL Compilation
- 3) HDL Analysis
- 4) HDL Synthesis
- 5) Advanced HDL Synthesis
- 5.1) HDL Synthesis Report
- 6) Low Level Synthesis
- 7) Final Report
- 7.1) Device utilization summary
- 7.2) TIMING REPORT
-
-
-=========================================================================
-* Synthesis Options Summary *
-=========================================================================
----- Source Parameters
-Input File Name : btndemo.prj
-Input Format : mixed
-Ignore Synthesis Constraint File : NO
-Verilog Include Directory :
-
----- Target Parameters
-Output File Name : btndemo
-Output Format : NGC
-Target Device : xc2s200-5-pq208
-
----- Source Options
-Top Module Name : btndemo
-Automatic FSM Extraction : YES
-FSM Encoding Algorithm : Auto
-FSM Style : lut
-RAM Extraction : Yes
-RAM Style : Auto
-ROM Extraction : Yes
-ROM Style : Auto
-Mux Extraction : YES
-Mux Style : Auto
-Decoder Extraction : YES
-Priority Encoder Extraction : YES
-Shift Register Extraction : YES
-Logical Shifter Extraction : YES
-XOR Collapsing : YES
-Resource Sharing : YES
-Multiplier Style : lut
-Automatic Register Balancing : No
-
----- Target Options
-Add IO Buffers : YES
-Global Maximum Fanout : 100
-Add Generic Clock Buffer(BUFG) : 4
-Register Duplication : YES
-Equivalent register Removal : YES
-Slice Packing : YES
-Pack IO Registers into IOBs : auto
-
----- General Options
-Optimization Goal : Speed
-Optimization Effort : 1
-Keep Hierarchy : NO
-Global Optimization : AllClockNets
-RTL Output : Yes
-Write Timing Constraints : NO
-Hierarchy Separator : _
-Bus Delimiter : <>
-Case Specifier : maintain
-Slice Utilization Ratio : 100
-Slice Utilization Ratio Delta : 5
-
----- Other Options
-lso : btndemo.lso
-Read Cores : YES
-cross_clock_analysis : NO
-verilog2001 : YES
-Optimize Instantiated Primitives : NO
-tristate2logic : No
-
-=========================================================================
-
-
-=========================================================================
-* HDL Compilation *
-=========================================================================
-Compiling vhdl file X:/Barron/config/D2/BASIC/BtnDemo/BtnDemo.vhd in Library work.
-Architecture behavioral of Entity btndemo is up to date.
-
-=========================================================================
-* HDL Analysis *
-=========================================================================
-Analyzing Entity
(Architecture ).
-WARNING:Xst:766 - X:/Barron/config/D2/BASIC/BtnDemo/BtnDemo.vhd line 70: Generating a Black Box for component .
-Entity analyzed. Unit generated.
-
-
-=========================================================================
-* HDL Synthesis *
-=========================================================================
-
-Synthesizing Unit .
- Related source file is X:/Barron/config/D2/BASIC/BtnDemo/BtnDemo.vhd.
-Unit synthesized.
-
-
-=========================================================================
-* Advanced HDL Synthesis *
-=========================================================================
-
-Advanced RAM inference ...
-Advanced multiplier inference ...
-Advanced Registered AddSub inference ...
-Dynamic shift register inference ...
-
-=========================================================================
-HDL Synthesis Report
-
-Found no macro
-=========================================================================
-
-=========================================================================
-* Low Level Synthesis *
-=========================================================================
-
-Optimizing unit ...
-Loading device for application Xst from file 'v200.nph' in environment C:/Xilinx.
-
-Mapping all equations...
-Building and optimizing final netlist ...
-Found area constraint ratio of 100 (+ 5) on block btndemo, actual ratio is 0.
-
-=========================================================================
-* Final Report *
-=========================================================================
-Final Results
-RTL Top Level Output File Name : btndemo.ngr
-Top Level Output File Name : btndemo
-Output Format : NGC
-Optimization Goal : Speed
-Keep Hierarchy : NO
-
-Design Statistics
-# IOs : 2
-
-Cell Usage :
-# IO Buffers : 2
-# IBUFG : 1
-# OBUF : 1
-=========================================================================
-
-Device utilization summary:
----------------------------
-
-Selected Device : 2s200pq208-5
-
- Number of bonded IOBs: 2 out of 144 1%
-
-
-=========================================================================
-TIMING REPORT
-
-NOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.
- FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT
- GENERATED AFTER PLACE-and-ROUTE.
-
-Clock Information:
-------------------
-No clock signals found in this design
-
-Timing Summary:
----------------
-Speed Grade: -5
-
- Minimum period: No path found
- Minimum input arrival time before clock: No path found
- Maximum output required time after clock: No path found
- Maximum combinational path delay: 8.404ns
-
-Timing Detail:
---------------
-All values displayed in nanoseconds (ns)
-
--------------------------------------------------------------------------
-Timing constraint: Default path analysis
-Delay: 8.404ns (Levels of Logic = 2)
- Source: btn (PAD)
- Destination: led (PAD)
-
- Data Path: btn to led
- Gate Net
- Cell:in->out fanout Delay Delay Logical Name (Net Name)
- ---------------------------------------- ------------
- IBUFG:I->O 1 1.697 1.150 U1 (led_OBUF)
- OBUF:I->O 5.557 led_OBUF (led)
- ----------------------------------------
- Total 8.404ns (7.254ns logic, 1.150ns route)
- (86.3% logic, 13.7% route)
-
-=========================================================================
-CPU : 8.38 / 12.41 s | Elapsed : 8.00 / 12.00 s
-
--->
-
-Total memory usage is 58968 kilobytes
-
-
Index: projects/BtnDemo/btndemo.xst
===================================================================
--- projects/BtnDemo/btndemo.xst (revision 430)
+++ projects/BtnDemo/btndemo.xst (nonexistent)
@@ -1,41 +0,0 @@
-set -tmpdir .
-set -overwrite YES
-set -xsthdpdir ./xst
-run
--ifmt VHDL
--ent btndemo
--p xc2s200-pq208-5
--ifn btndemo.prj
--opt_mode Speed
--opt_level 1
--check_attribute_syntax YES
--keep_hierarchy No
--glob_opt AllClockNets
--write_timing_constraints No
--fsm_extract YES -fsm_encoding Auto
--fsm_fftype D
--mux_extract YES
--resource_sharing YES
--complex_clken YES
--rom_extract Yes
--ram_extract Yes
--ram_style Auto
--mux_style Auto
--decoder_extract YES
--priority_extract YES
--shreg_extract YES
--shift_extract YES
--xor_collapse YES
--iobuf YES
--equivalent_register_removal YES
--bufg 4
--max_fanout 100
--incremental_synthesis NO
--register_duplication YES
--register_balancing No
--move_first_stage YES
--move_last_stage YES
--slice_packing YES
--iob auto
--ofn btndemo
--ofmt NGC
Index: projects/BtnDemo/btndemo_map.ngm
===================================================================
--- projects/BtnDemo/btndemo_map.ngm (revision 430)
+++ projects/BtnDemo/btndemo_map.ngm (nonexistent)
@@ -1,3 +0,0 @@
-XILINX-XDB 0.1 STUB 0.1 ASCII
-XILINX-XDM V1.2e
-$40x50=#Zl|bdaa:!3-53(?&8*/=85+Rdtjwlii2);%5= ;.2"'g>4t:9:{}?>7-418FP@682H^EAJPT@PDAQGUKA?0OFLZF89@KHKN\]OO;6M]E@VF@`=CZJUXYNMJSRDVH==BPYKEHHJ;;GPBCg=AZHMHC[K]EEc8BWG@WKKXIIo4FSCD[FIRF]20J_AB_TAE55=AzhmGeo ctm8JTDB682LymjBfb/nwh?IE]O;;7K|ngMka*irk2FZJH<64FscdHld)d}f1T[EPGBNHMGSA=2M%?4:EFJ@TF\LN+\B][-GNJJQ753NOEI_O[EE"SKVR*O:::7D;4ICWEC7=NF11BBKK]RDF5?LIDGDZ=7DA[YQG7?LVFL>1GEO\NRX48HJGCMM90@BM8;MMDMFGK02FoaRZvpd`8IDVBPYKEHHJ9;LCST@Bf3DK[S@AKUMGg?HGWW]CFI^ZNMQ`8IDVX^LXXEB@l;LcikwPbzzcdbn5BiomqR`ttafd<7CK[WNPH5>I33FH^J95@P@F0?JSS;2Z<=>5_7618TDB33YKYX55_HXQJGDJ>3ZCLSNAZNU18WKM13ZE^^NK<;RP@b>RFZNO_S]O]TU[SA1=SQYO97X?l;TQFVZPN[@HGI45YIDU\P\VB9m1SEAGAX,ZGF%6)9)Y_YO.?.0"BWFON>2RXXAGMc:ZUOZADDBCIYK84Xe`\Mac^c`VZye`Zvpdd8\anXX{cfZh||inl4?]boW]kln6Vkm^@jjaoio8:0TicPM`hlvScu{`ee==5Wdl]Nmkiu^lxxeb`<;Yqw7>dsf>1ixcjjmn18h`b?3eooSBLZF29neu>0?47?<:012gf642;2?9;ua4782?k202;1/?k4?lc1196=22?2Y:i7:j:08274ed8:0949;l;R490`<6289:on><:3:7<<=T9l0?h7>5123`g55=:1>3h6]=3;6g>45=9:;ho==5296;b>U12=n1<7?<1ba37?4?<1l0h9o50;396~U02=21=>4>30a`46<50=?=7):54g9K<>h5=3>;in<6be9'61<3n2.9:7?<;wV16?6=93;1?v]8:5:956<6;8ih<>4=8575?!5e2;:0Z9=52zw13?7<};21<6s+3081?g2f2909694<{%1;>1g<@:k0b9:50:k7=?6=3f>i6=44b2;95?4=83:p(>65169K7d=O;m1/8?4:;%3a>4><@8k0(=h:h0:6):=:3f8?xd3k3;1>7>50z&04e3A9j7E=k;%61>6=O9h1/=o4=d:&2`?363g>?6?5f1782>!2528207bf;0e?k232:1b?=4>:%61>66<3th?n7?51;294~"3:39;7E=n;I3:?!7e2;n0(=z{=31<7=t^5;896?=9?16844<0:p0f<72;q6?44=a:?7g?713ty?n7>53z\7f>;3k38j70:m:228yxh6i3:1=vFc;295~N4i2C8<7?t2;Ya?7|9o0vb9:52:~rQd=83;1=7=tS687`?6=9:;ho==5296;a>"4j3997)=>:39K51=O9<1i8l4?:387>6}Ok2.8;7<4ne87?k542:1e894?;h6:>5<7<729q/?54=:k1/=o4=d:Jb?k232;1/><4>0:k22?7=3f8j6<44}c6:>4<6290;w)=7:0a8 4d=911/=k4=f:Jb?k232:1/><4i;n15>4<i6<4>:183!5?2;i0(602;k019m5179~w1d=839p19m52`9>0g<4<2T?n6srn3d94?7|f=>1<6sa3183>4}i<=0:7p`<1;295~h3<380qpsr@AAx70<>::o=597r@A@x55}383:1<7<524824>{|<80;6=4=:34954=zs=;1<7>52;04>44;6=4?:381743tq?=7>50;096<<6<2wp8<4?:181>7g=9<1vw9>50;296?4e28<0qv:>:183>7<5k3;<7pu;0;294?4=:m0:46st4083>5<52;o1=45r}ABSxFG
\ No newline at end of file
Index: projects/BtnDemo/btndemo_pad.csv
===================================================================
--- projects/BtnDemo/btndemo_pad.csv (revision 430)
+++ projects/BtnDemo/btndemo_pad.csv (nonexistent)
@@ -1,237 +0,0 @@
-Release 6.2.03i - Par G.31a
-Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.
-
-Wed Jul 07 09:50:22 2004
-
-
-NOTE: This file is designed to be imported into a spreadsheet program
-such as Microsoft Excel for viewing, printing and sorting. The ,
-character is used as the data field separator. This file is also designed
-to support parsing.
-
-INPUT FILE: btndemo_map.ncd
-OUTPUT FILE: btndemo_pad.csv
-PART TYPE: xc2s200
-SPEED GRADE: -5
-PACKAGE: pq208
-
-Pinout by Pin Number:
-
------,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,
-Pin Number,Signal Name,Pin Usage,Pin Name,Direction,IO Standard,IO Bank Number,Drive (mA),Slew Rate,Termination,IOB Delay,Voltage,Constraint,
-P1,,,GND,,,,,,,,,,
-P2,,,TMS,,,,,,,,,,
-P3,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P4,,IOB,IO_VREF_7,UNUSED,,(0,7)***,,,,,,,
-P5,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P6,,IOB,IO_VREF_7,UNUSED,,(0,7)***,,,,,,,
-P7,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P8,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P9,,IOB,IO_VREF_7,UNUSED,,(0,7)***,,,,,,,
-P10,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P11,,,GND,,,,,,,,,,
-P12,,,VCCO,,,0,,,,,na,,
-P13,,,VCCINT,,,,,,,,2.5,,
-P14,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P15,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P16,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P17,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P18,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P19,,,GND,,,,,,,,,,
-P20,,IOB,IO_VREF_7,UNUSED,,(0,7)***,,,,,,,
-P21,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P22,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P23,,IOB,,UNUSED,,(0,7)***,,,,,,,
-P24,,PCIIOB,IO_IRDY,UNUSED,,(0,7)***,,,,,,,
-P25,,,GND,,,,,,,,,,
-P26,,,VCCO,,,0,,,,,na,,
-P27,,PCIIOB,IO_TRDY,UNUSED,,(0,6)***,,,,,,,
-P28,,,VCCINT,,,,,,,,2.5,,
-P29,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P30,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P31,,IOB,IO_VREF_6,UNUSED,,(0,6)***,,,,,,,
-P32,,,GND,,,,,,,,,,
-P33,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P34,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P35,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P36,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P37,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P38,,,VCCINT,,,,,,,,2.5,,
-P39,,,VCCO,,,0,,,,,na,,
-P40,,,GND,,,,,,,,,,
-P41,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P42,,IOB,IO_VREF_6,UNUSED,,(0,6)***,,,,,,,
-P43,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P44,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P45,,IOB,IO_VREF_6,UNUSED,,(0,6)***,,,,,,,
-P46,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P47,,IOB,IO_VREF_6,UNUSED,,(0,6)***,,,,,,,
-P48,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P49,,IOB,,UNUSED,,(0,6)***,,,,,,,
-P50,,,M1,,,,,,,,,,
-P51,,,GND,,,,,,,,,,
-P52,,,M0,,,,,,,,,,
-P53,,,VCCO,,,0,,,,,na,,
-P54,,,M2,,,,,,,,,,
-P55,,,NC,,,,,,,,,,
-P56,,,NC,,,,,,,,,,
-P57,,IOB,IO_VREF_5,UNUSED,,(0,5)***,,,,,,,
-P58,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P59,,IOB,IO_VREF_5,UNUSED,,(0,5)***,,,,,,,
-P60,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P61,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P62,,IOB,IO_VREF_5,UNUSED,,(0,5)***,,,,,,,
-P63,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P64,,,GND,,,,,,,,,,
-P65,,,VCCO,,,0,,,,,na,,
-P66,,,VCCINT,,,,,,,,2.5,,
-P67,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P68,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P69,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P70,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P71,led,IOB,,OUTPUT,LVTTL,(0,5)***,12,SLOW,NONE**,,,LOCATED,
-P72,,,GND,,,,,,,,,,
-P73,,IOB,IO_VREF_5,UNUSED,,(0,5)***,,,,,,,
-P74,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P75,,IOB,,UNUSED,,(0,5)***,,,,,,,
-P76,,,VCCINT,,,,,,,,2.5,,
-P77,btn,GCLKIOB,GCK1,INPUT,LVTTL,(0,5)***,,,,,,LOCATED,
-P78,,,VCCO,,,0,,,,,na,,
-P79,,,GND,,,,,,,,,,
-P80,,GCLKIOB,GCK0,UNUSED,,(0,4)***,,,,,,,
-P81,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P82,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P83,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P84,,IOB,IO_VREF_4,UNUSED,,(0,4)***,,,,,,,
-P85,,,GND,,,,,,,,,,
-P86,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P87,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P88,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P89,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P90,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P91,,,VCCINT,,,,,,,,2.5,,
-P92,,,VCCO,,,0,,,,,na,,
-P93,,,GND,,,,,,,,,,
-P94,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P95,,IOB,IO_VREF_4,UNUSED,,(0,4)***,,,,,,,
-P96,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P97,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P98,,IOB,IO_VREF_4,UNUSED,,(0,4)***,,,,,,,
-P99,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P100,,IOB,IO_VREF_4,UNUSED,,(0,4)***,,,,,,,
-P101,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P102,,IOB,,UNUSED,,(0,4)***,,,,,,,
-P103,,,GND,,,,,,,,,,
-P104,,,DONE,,,,,,,,,,
-P105,,,VCCO,,,0,,,,,na,,
-P106,,,PROGRAM,,,,,,,,,,
-P107,,IOB,IO_INIT,UNUSED,,(0,3)***,,,,,,,
-P108,,IOB,IO_D7,UNUSED,,(0,3)***,,,,,,,
-P109,,IOB,IO_VREF_3,UNUSED,,(0,3)***,,,,,,,
-P110,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P111,,IOB,IO_VREF_3,UNUSED,,(0,3)***,,,,,,,
-P112,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P113,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P114,,IOB,IO_VREF_3,UNUSED,,(0,3)***,,,,,,,
-P115,,IOB,IO_D6,UNUSED,,(0,3)***,,,,,,,
-P116,,,GND,,,,,,,,,,
-P117,,,VCCO,,,0,,,,,na,,
-P118,,,VCCINT,,,,,,,,2.5,,
-P119,,IOB,IO_D5,UNUSED,,(0,3)***,,,,,,,
-P120,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P121,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P122,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P123,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P124,,,GND,,,,,,,,,,
-P125,,IOB,IO_VREF_3,UNUSED,,(0,3)***,,,,,,,
-P126,,IOB,IO_D4,UNUSED,,(0,3)***,,,,,,,
-P127,,IOB,,UNUSED,,(0,3)***,,,,,,,
-P128,,,VCCINT,,,,,,,,2.5,,
-P129,,PCIIOB,IO_TRDY,UNUSED,,(0,3)***,,,,,,,
-P130,,,VCCO,,,0,,,,,na,,
-P131,,,GND,,,,,,,,,,
-P132,,PCIIOB,IO_IRDY,UNUSED,,(0,2)***,,,,,,,
-P133,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P134,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P135,,IOB,IO_D3,UNUSED,,(0,2)***,,,,,,,
-P136,,IOB,IO_VREF_2,UNUSED,,(0,2)***,,,,,,,
-P137,,,GND,,,,,,,,,,
-P138,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P139,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P140,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P141,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P142,,IOB,IO_D2,UNUSED,,(0,2)***,,,,,,,
-P143,,,VCCINT,,,,,,,,2.5,,
-P144,,,VCCO,,,0,,,,,na,,
-P145,,,GND,,,,,,,,,,
-P146,,IOB,IO_D1,UNUSED,,(0,2)***,,,,,,,
-P147,,IOB,IO_VREF_2,UNUSED,,(0,2)***,,,,,,,
-P148,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P149,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P150,,IOB,IO_VREF_2,UNUSED,,(0,2)***,,,,,,,
-P151,,IOB,,UNUSED,,(0,2)***,,,,,,,
-P152,,IOB,IO_VREF_2,UNUSED,,(0,2)***,,,,,,,
-P153,,IOB,IO_DIN_D0,UNUSED,,(0,2)***,,,,,,,
-P154,,IOB,IO_DOUT_BUSY,UNUSED,,(0,2)***,,,,,,,
-P155,,,CCLK,,,,,,,,,,
-P156,,,VCCO,,,0,,,,,na,,
-P157,,,TDO,,,,,,,,,,
-P158,,,GND,,,,,,,,,,
-P159,,,TDI,,,,,,,,,,
-P160,,IOB,IO_CS,UNUSED,,(0,1)***,,,,,,,
-P161,,IOB,IO_WRITE,UNUSED,,(0,1)***,,,,,,,
-P162,,IOB,IO_VREF_1,UNUSED,,(0,1)***,,,,,,,
-P163,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P164,,IOB,IO_VREF_1,UNUSED,,(0,1)***,,,,,,,
-P165,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P166,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P167,,IOB,IO_VREF_1,UNUSED,,(0,1)***,,,,,,,
-P168,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P169,,,GND,,,,,,,,,,
-P170,,,VCCO,,,0,,,,,na,,
-P171,,,VCCINT,,,,,,,,2.5,,
-P172,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P173,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P174,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P175,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P176,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P177,,,GND,,,,,,,,,,
-P178,,IOB,IO_VREF_1,UNUSED,,(0,1)***,,,,,,,
-P179,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P180,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P181,,IOB,,UNUSED,,(0,1)***,,,,,,,
-P182,,GCLKIOB,GCK2,UNUSED,,(0,1)***,,,,,,,
-P183,,,GND,,,,,,,,,,
-P184,,,VCCO,,,0,,,,,na,,
-P185,,GCLKIOB,GCK3,UNUSED,,0,,,,,,,
-P186,,,VCCINT,,,,,,,,2.5,,
-P187,,IOB,,UNUSED,,0,,,,,,,
-P188,,IOB,,UNUSED,,0,,,,,,,
-P189,,IOB,IO_VREF_0,UNUSED,,0,,,,,,,
-P190,,,GND,,,,,,,,,,
-P191,,IOB,,UNUSED,,0,,,,,,,
-P192,,IOB,,UNUSED,,0,,,,,,,
-P193,,IOB,,UNUSED,,0,,,,,,,
-P194,,IOB,,UNUSED,,0,,,,,,,
-P195,,IOB,,UNUSED,,0,,,,,,,
-P196,,,VCCINT,,,,,,,,2.5,,
-P197,,,VCCO,,,0,,,,,na,,
-P198,,,GND,,,,,,,,,,
-P199,,IOB,,UNUSED,,0,,,,,,,
-P200,,IOB,IO_VREF_0,UNUSED,,0,,,,,,,
-P201,,IOB,,UNUSED,,0,,,,,,,
-P202,,IOB,,UNUSED,,0,,,,,,,
-P203,,IOB,IO_VREF_0,UNUSED,,0,,,,,,,
-P204,,IOB,,UNUSED,,0,,,,,,,
-P205,,IOB,IO_VREF_0,UNUSED,,0,,,,,,,
-P206,,IOB,,UNUSED,,0,,,,,,,
-P207,,,TCK,,,,,,,,,,
-P208,,,VCCO,,,0,,,,,na,,
-
------,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,-----,
-
-* Default value.
-** This default Pullup/Pulldown value can be overridden in Bitgen.
-*** In some smaller packages, the VCCO bank number of a pin may trail
- the VREF bank number (VCCO,VREF).
-
Index: projects/BtnDemo/btndemo.twx
===================================================================
--- projects/BtnDemo/btndemo.twx (revision 430)
+++ projects/BtnDemo/btndemo.twx (nonexistent)
@@ -1,237 +0,0 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-]>
-Release 6.2.03i Trace G.28Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.C:/Xilinx/bin/nt/trce.exe -intstyle ise -e 3 -l 3 -xml btndemo btndemo.ncd -o
-btndemo.twr btndemo.pcf
-
-btndemo.ncdbtndemo.pcfxc2s200-5PRODUCTION 1.27 2003-12-13INFO:Timing:2698 - No timing constraints found, doing default enumeration.INFO:Timing:2752 - To get complete path coverage, use the unconstrained paths option. All paths that are not constrained will be reported in the unconstrained paths section(s) of the report.btnled7.273Wed Jul 07 09:50:48 2004TraceTrace SettingsPeak Memory Usage: 47 MB
-
Index: projects/BtnDemo/btndemo.dly
===================================================================
--- projects/BtnDemo/btndemo.dly (revision 430)
+++ projects/BtnDemo/btndemo.dly (nonexistent)
@@ -1,22 +0,0 @@
-Release 5.1i - Par F.23
-Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.
-
-Thu May 29 12:19:45 2003
-
-File: btndemo.dly
-
- The 20 Worst Net Delays are:
--------------------------------
-| Max Delay (ns) | Netname |
--------------------------------
- 0.926 bnbuf
----------------------------------
-
--------------------------------------------------------------------------------
- Net Delays
--------------------------------------------------------------------------------
-
-bnbuf
- btn.GCLKOUT
- 0.926 led.O
-
Index: projects/BtnDemo/BtnDemo.prj
===================================================================
--- projects/BtnDemo/BtnDemo.prj (revision 430)
+++ projects/BtnDemo/BtnDemo.prj (nonexistent)
@@ -1 +0,0 @@
-vhdl work "BtnDemo.vhd"
Index: projects/BtnDemo/btndemo.mrp
===================================================================
--- projects/BtnDemo/btndemo.mrp (revision 430)
+++ projects/BtnDemo/btndemo.mrp (nonexistent)
@@ -1,170 +0,0 @@
-Release 6.2.03i Map G.31a
-Xilinx Mapping Report File for Design 'btndemo'
-
-Design Information
-------------------
-Command Line : C:/Xilinx/bin/nt/map.exe -intstyle ise -p xc2s200-pq208-5 -cm
-area -pr b -k 4 -c 100 -tx off -o btndemo_map.ncd btndemo.ngd btndemo.pcf
-Target Device : x2s200
-Target Package : pq208
-Target Speed : -5
-Mapper Version : spartan2 -- $Revision: 1.16.8.1 $
-Mapped Date : Wed Jul 07 09:50:05 2004
-
-Design Summary
---------------
-Number of errors: 0
-Number of warnings: 1
-Logic Utilization:
-Logic Distribution:
- Number of Slices containing only related logic: 0 out of 0 0%
- Number of Slices containing unrelated logic: 0 out of 0 0%
- *See NOTES below for an explanation of the effects of unrelated logic
- Number of bonded IOBs: 1 out of 140 1%
- Number of GCLKIOBs: 1 out of 4 25%
-
-Total equivalent gate count for design: 0
-Additional JTAG gate count for IOBs: 96
-Peak Memory Usage: 61 MB
-
-NOTES:
-
- Related logic is defined as being logic that shares connectivity -
- e.g. two LUTs are "related" if they share common inputs.
- When assembling slices, Map gives priority to combine logic that
- is related. Doing so results in the best timing performance.
-
- Unrelated logic shares no connectivity. Map will only begin
- packing unrelated logic into a slice once 99% of the slices are
- occupied through related logic packing.
-
- Note that once logic distribution reaches the 99% level through
- related logic packing, this does not mean the device is completely
- utilized. Unrelated logic packing will then begin, continuing until
- all usable LUTs and FFs are occupied. Depending on your timing
- budget, increased levels of unrelated logic packing may adversely
- affect the overall timing performance of your design.
-
-
-Table of Contents
------------------
-Section 1 - Errors
-Section 2 - Warnings
-Section 3 - Informational
-Section 4 - Removed Logic Summary
-Section 5 - Removed Logic
-Section 6 - IOB Properties
-Section 7 - RPMs
-Section 8 - Guide Report
-Section 9 - Area Group Summary
-Section 10 - Modular Design Summary
-Section 11 - Timing Report
-Section 12 - Configuration String Information
-Section 13 - Additional Device Resource Counts
-
-Section 1 - Errors
-------------------
-
-Section 2 - Warnings
---------------------
-WARNING:LIT - Dedicated Clock IO IBUFG symbol "U1" (output signal=led_OBUF) is
- not driving a global clock buffer of a DLL. This configuration will result in
- high clock skew and long net delay.
-
-Section 3 - Informational
--------------------------
-INFO:LIT:95 - All of the external outputs in this design are using slew rate
- limited output drivers. The delay on speed critical outputs can be
- dramatically reduced by designating them as fast outputs in the schematic.
-INFO:MapLib:562 - No environment variables are currently set.
-
-Section 4 - Removed Logic Summary
----------------------------------
-
-Section 5 - Removed Logic
--------------------------
-
-Section 6 - IOB Properties
---------------------------
-
-+------------------------------------------------------------------------------------------------------------------------+
-| IOB Name | Type | Direction | IO Standard | Drive | Slew | Reg (s) | Resistor | IOB |
-| | | | | Strength | Rate | | | Delay |
-+------------------------------------------------------------------------------------------------------------------------+
-| btn | GCLKIOB | INPUT | LVTTL | | | | | |
-| led | IOB | OUTPUT | LVTTL | 12 | SLOW | | | |
-+------------------------------------------------------------------------------------------------------------------------+
-
-Section 7 - RPMs
-----------------
-
-Section 8 - Guide Report
-------------------------
-Guide not run on this design.
-
-Section 9 - Area Group Summary
-------------------------------
-No area groups were found in this design.
-
-Section 10 - Modular Design Summary
------------------------------------
-Modular Design not used for this design.
-
-Section 11 - Timing Report
---------------------------
-This design was not run using timing mode.
-
-Section 12 - Configuration String Details
------------------------------------------
-Use the "-detail" map option to print out Configuration Strings
-
-Section 13 - Additional Device Resource Counts
-----------------------------------------------
-Number of JTAG Gates for IOBs = 2
-Number of Equivalent Gates for Design = 0
-Number of RPM Macros = 0
-Number of Hard Macros = 0
-PCI IOBs = 0
-PCI LOGICs = 0
-CAPTUREs = 0
-BSCANs = 0
-STARTUPs = 0
-DLLs = 0
-GCLKIOBs = 1
-GCLKs = 0
-Block RAMs = 0
-TBUFs = 0
-Total Registers (Flops & Latches in Slices & IOBs) not driven by LUTs = 0
-IOB Latches not driven by LUTs = 0
-IOB Latches = 0
-IOB Flip Flops not driven by LUTs = 0
-IOB Flip Flops = 0
-Unbonded IOBs = 0
-Bonded IOBs = 1
-Shift Registers = 0
-Static Shift Registers = 0
-Dynamic Shift Registers = 0
-16x1 ROMs = 0
-16x1 RAMs = 0
-32x1 RAMs = 0
-Dual Port RAMs = 0
-MULTANDs = 0
-MUXF5s + MUXF6s = 0
-4 input LUTs used as Route-Thrus = 0
-4 input LUTs = 0
-Slice Latches not driven by LUTs = 0
-Slice Latches = 0
-Slice Flip Flops not driven by LUTs = 0
-Slice Flip Flops = 0
-Slices = 0
-Number of LUT signals with 4 loads = 0
-Number of LUT signals with 3 loads = 0
-Number of LUT signals with 2 loads = 0
-Number of LUT signals with 1 load = 0
-NGM Average fanout of LUT = -1.#J
-NGM Maximum fanout of LUT = 0
-NGM Average fanin for LUT = -1.#IND
-Number of XVK_GCLKIBUF symbols = 1
-Number of OPAD symbols = 1
-Number of OBUF symbols = 1
-Number of IPAD symbols = 1
Index: projects/BtnDemo/webtalk_pn.xml
===================================================================
--- projects/BtnDemo/webtalk_pn.xml (revision 430)
+++ projects/BtnDemo/webtalk_pn.xml (nonexistent)
@@ -1,43 +0,0 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Index: projects/BtnDemo/btndemo.xpi
===================================================================
--- projects/BtnDemo/btndemo.xpi (revision 430)
+++ projects/BtnDemo/btndemo.xpi (nonexistent)
@@ -1,3 +0,0 @@
-PROGRAM=PAR
-STATE=ROUTED
-TIMESPECS_MET=OFF
Index: projects/BtnDemo/btndemo.pad
===================================================================
--- projects/BtnDemo/btndemo.pad (revision 430)
+++ projects/BtnDemo/btndemo.pad (nonexistent)
@@ -1,237 +0,0 @@
-Release 6.2.03i - Par G.31a
-Copyright (c) 1995-2004 Xilinx, Inc. All rights reserved.
-
-Wed Jul 07 09:50:28 2004
-
-
-NOTE: This file is designed to be imported into a spreadsheet program
-such as Microsoft Excel for viewing, printing and sorting. The |
-character is used as the data field separator. This file is also designed
-to support parsing.
-
-INPUT FILE: btndemo_map.ncd
-OUTPUT FILE: btndemo.pad
-PART TYPE: xc2s200
-SPEED GRADE: -5
-PACKAGE: pq208
-
-Pinout by Pin Number:
-
------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
-Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|Drive (mA)|Slew Rate|Termination|IOB Delay|Voltage|Constraint|
-P1|||GND||||||||||
-P2|||TMS||||||||||
-P3||IOB||UNUSED||(0,7)***|||||||
-P4||IOB|IO_VREF_7|UNUSED||(0,7)***|||||||
-P5||IOB||UNUSED||(0,7)***|||||||
-P6||IOB|IO_VREF_7|UNUSED||(0,7)***|||||||
-P7||IOB||UNUSED||(0,7)***|||||||
-P8||IOB||UNUSED||(0,7)***|||||||
-P9||IOB|IO_VREF_7|UNUSED||(0,7)***|||||||
-P10||IOB||UNUSED||(0,7)***|||||||
-P11|||GND||||||||||
-P12|||VCCO|||0|||||na||
-P13|||VCCINT||||||||2.5||
-P14||IOB||UNUSED||(0,7)***|||||||
-P15||IOB||UNUSED||(0,7)***|||||||
-P16||IOB||UNUSED||(0,7)***|||||||
-P17||IOB||UNUSED||(0,7)***|||||||
-P18||IOB||UNUSED||(0,7)***|||||||
-P19|||GND||||||||||
-P20||IOB|IO_VREF_7|UNUSED||(0,7)***|||||||
-P21||IOB||UNUSED||(0,7)***|||||||
-P22||IOB||UNUSED||(0,7)***|||||||
-P23||IOB||UNUSED||(0,7)***|||||||
-P24||PCIIOB|IO_IRDY|UNUSED||(0,7)***|||||||
-P25|||GND||||||||||
-P26|||VCCO|||0|||||na||
-P27||PCIIOB|IO_TRDY|UNUSED||(0,6)***|||||||
-P28|||VCCINT||||||||2.5||
-P29||IOB||UNUSED||(0,6)***|||||||
-P30||IOB||UNUSED||(0,6)***|||||||
-P31||IOB|IO_VREF_6|UNUSED||(0,6)***|||||||
-P32|||GND||||||||||
-P33||IOB||UNUSED||(0,6)***|||||||
-P34||IOB||UNUSED||(0,6)***|||||||
-P35||IOB||UNUSED||(0,6)***|||||||
-P36||IOB||UNUSED||(0,6)***|||||||
-P37||IOB||UNUSED||(0,6)***|||||||
-P38|||VCCINT||||||||2.5||
-P39|||VCCO|||0|||||na||
-P40|||GND||||||||||
-P41||IOB||UNUSED||(0,6)***|||||||
-P42||IOB|IO_VREF_6|UNUSED||(0,6)***|||||||
-P43||IOB||UNUSED||(0,6)***|||||||
-P44||IOB||UNUSED||(0,6)***|||||||
-P45||IOB|IO_VREF_6|UNUSED||(0,6)***|||||||
-P46||IOB||UNUSED||(0,6)***|||||||
-P47||IOB|IO_VREF_6|UNUSED||(0,6)***|||||||
-P48||IOB||UNUSED||(0,6)***|||||||
-P49||IOB||UNUSED||(0,6)***|||||||
-P50|||M1||||||||||
-P51|||GND||||||||||
-P52|||M0||||||||||
-P53|||VCCO|||0|||||na||
-P54|||M2||||||||||
-P55|||NC||||||||||
-P56|||NC||||||||||
-P57||IOB|IO_VREF_5|UNUSED||(0,5)***|||||||
-P58||IOB||UNUSED||(0,5)***|||||||
-P59||IOB|IO_VREF_5|UNUSED||(0,5)***|||||||
-P60||IOB||UNUSED||(0,5)***|||||||
-P61||IOB||UNUSED||(0,5)***|||||||
-P62||IOB|IO_VREF_5|UNUSED||(0,5)***|||||||
-P63||IOB||UNUSED||(0,5)***|||||||
-P64|||GND||||||||||
-P65|||VCCO|||0|||||na||
-P66|||VCCINT||||||||2.5||
-P67||IOB||UNUSED||(0,5)***|||||||
-P68||IOB||UNUSED||(0,5)***|||||||
-P69||IOB||UNUSED||(0,5)***|||||||
-P70||IOB||UNUSED||(0,5)***|||||||
-P71|led|IOB||OUTPUT|LVTTL|(0,5)***|12|SLOW|NONE**|||LOCATED|
-P72|||GND||||||||||
-P73||IOB|IO_VREF_5|UNUSED||(0,5)***|||||||
-P74||IOB||UNUSED||(0,5)***|||||||
-P75||IOB||UNUSED||(0,5)***|||||||
-P76|||VCCINT||||||||2.5||
-P77|btn|GCLKIOB|GCK1|INPUT|LVTTL|(0,5)***||||||LOCATED|
-P78|||VCCO|||0|||||na||
-P79|||GND||||||||||
-P80||GCLKIOB|GCK0|UNUSED||(0,4)***|||||||
-P81||IOB||UNUSED||(0,4)***|||||||
-P82||IOB||UNUSED||(0,4)***|||||||
-P83||IOB||UNUSED||(0,4)***|||||||
-P84||IOB|IO_VREF_4|UNUSED||(0,4)***|||||||
-P85|||GND||||||||||
-P86||IOB||UNUSED||(0,4)***|||||||
-P87||IOB||UNUSED||(0,4)***|||||||
-P88||IOB||UNUSED||(0,4)***|||||||
-P89||IOB||UNUSED||(0,4)***|||||||
-P90||IOB||UNUSED||(0,4)***|||||||
-P91|||VCCINT||||||||2.5||
-P92|||VCCO|||0|||||na||
-P93|||GND||||||||||
-P94||IOB||UNUSED||(0,4)***|||||||
-P95||IOB|IO_VREF_4|UNUSED||(0,4)***|||||||
-P96||IOB||UNUSED||(0,4)***|||||||
-P97||IOB||UNUSED||(0,4)***|||||||
-P98||IOB|IO_VREF_4|UNUSED||(0,4)***|||||||
-P99||IOB||UNUSED||(0,4)***|||||||
-P100||IOB|IO_VREF_4|UNUSED||(0,4)***|||||||
-P101||IOB||UNUSED||(0,4)***|||||||
-P102||IOB||UNUSED||(0,4)***|||||||
-P103|||GND||||||||||
-P104|||DONE||||||||||
-P105|||VCCO|||0|||||na||
-P106|||PROGRAM||||||||||
-P107||IOB|IO_INIT|UNUSED||(0,3)***|||||||
-P108||IOB|IO_D7|UNUSED||(0,3)***|||||||
-P109||IOB|IO_VREF_3|UNUSED||(0,3)***|||||||
-P110||IOB||UNUSED||(0,3)***|||||||
-P111||IOB|IO_VREF_3|UNUSED||(0,3)***|||||||
-P112||IOB||UNUSED||(0,3)***|||||||
-P113||IOB||UNUSED||(0,3)***|||||||
-P114||IOB|IO_VREF_3|UNUSED||(0,3)***|||||||
-P115||IOB|IO_D6|UNUSED||(0,3)***|||||||
-P116|||GND||||||||||
-P117|||VCCO|||0|||||na||
-P118|||VCCINT||||||||2.5||
-P119||IOB|IO_D5|UNUSED||(0,3)***|||||||
-P120||IOB||UNUSED||(0,3)***|||||||
-P121||IOB||UNUSED||(0,3)***|||||||
-P122||IOB||UNUSED||(0,3)***|||||||
-P123||IOB||UNUSED||(0,3)***|||||||
-P124|||GND||||||||||
-P125||IOB|IO_VREF_3|UNUSED||(0,3)***|||||||
-P126||IOB|IO_D4|UNUSED||(0,3)***|||||||
-P127||IOB||UNUSED||(0,3)***|||||||
-P128|||VCCINT||||||||2.5||
-P129||PCIIOB|IO_TRDY|UNUSED||(0,3)***|||||||
-P130|||VCCO|||0|||||na||
-P131|||GND||||||||||
-P132||PCIIOB|IO_IRDY|UNUSED||(0,2)***|||||||
-P133||IOB||UNUSED||(0,2)***|||||||
-P134||IOB||UNUSED||(0,2)***|||||||
-P135||IOB|IO_D3|UNUSED||(0,2)***|||||||
-P136||IOB|IO_VREF_2|UNUSED||(0,2)***|||||||
-P137|||GND||||||||||
-P138||IOB||UNUSED||(0,2)***|||||||
-P139||IOB||UNUSED||(0,2)***|||||||
-P140||IOB||UNUSED||(0,2)***|||||||
-P141||IOB||UNUSED||(0,2)***|||||||
-P142||IOB|IO_D2|UNUSED||(0,2)***|||||||
-P143|||VCCINT||||||||2.5||
-P144|||VCCO|||0|||||na||
-P145|||GND||||||||||
-P146||IOB|IO_D1|UNUSED||(0,2)***|||||||
-P147||IOB|IO_VREF_2|UNUSED||(0,2)***|||||||
-P148||IOB||UNUSED||(0,2)***|||||||
-P149||IOB||UNUSED||(0,2)***|||||||
-P150||IOB|IO_VREF_2|UNUSED||(0,2)***|||||||
-P151||IOB||UNUSED||(0,2)***|||||||
-P152||IOB|IO_VREF_2|UNUSED||(0,2)***|||||||
-P153||IOB|IO_DIN_D0|UNUSED||(0,2)***|||||||
-P154||IOB|IO_DOUT_BUSY|UNUSED||(0,2)***|||||||
-P155|||CCLK||||||||||
-P156|||VCCO|||0|||||na||
-P157|||TDO||||||||||
-P158|||GND||||||||||
-P159|||TDI||||||||||
-P160||IOB|IO_CS|UNUSED||(0,1)***|||||||
-P161||IOB|IO_WRITE|UNUSED||(0,1)***|||||||
-P162||IOB|IO_VREF_1|UNUSED||(0,1)***|||||||
-P163||IOB||UNUSED||(0,1)***|||||||
-P164||IOB|IO_VREF_1|UNUSED||(0,1)***|||||||
-P165||IOB||UNUSED||(0,1)***|||||||
-P166||IOB||UNUSED||(0,1)***|||||||
-P167||IOB|IO_VREF_1|UNUSED||(0,1)***|||||||
-P168||IOB||UNUSED||(0,1)***|||||||
-P169|||GND||||||||||
-P170|||VCCO|||0|||||na||
-P171|||VCCINT||||||||2.5||
-P172||IOB||UNUSED||(0,1)***|||||||
-P173||IOB||UNUSED||(0,1)***|||||||
-P174||IOB||UNUSED||(0,1)***|||||||
-P175||IOB||UNUSED||(0,1)***|||||||
-P176||IOB||UNUSED||(0,1)***|||||||
-P177|||GND||||||||||
-P178||IOB|IO_VREF_1|UNUSED||(0,1)***|||||||
-P179||IOB||UNUSED||(0,1)***|||||||
-P180||IOB||UNUSED||(0,1)***|||||||
-P181||IOB||UNUSED||(0,1)***|||||||
-P182||GCLKIOB|GCK2|UNUSED||(0,1)***|||||||
-P183|||GND||||||||||
-P184|||VCCO|||0|||||na||
-P185||GCLKIOB|GCK3|UNUSED||0|||||||
-P186|||VCCINT||||||||2.5||
-P187||IOB||UNUSED||0|||||||
-P188||IOB||UNUSED||0|||||||
-P189||IOB|IO_VREF_0|UNUSED||0|||||||
-P190|||GND||||||||||
-P191||IOB||UNUSED||0|||||||
-P192||IOB||UNUSED||0|||||||
-P193||IOB||UNUSED||0|||||||
-P194||IOB||UNUSED||0|||||||
-P195||IOB||UNUSED||0|||||||
-P196|||VCCINT||||||||2.5||
-P197|||VCCO|||0|||||na||
-P198|||GND||||||||||
-P199||IOB||UNUSED||0|||||||
-P200||IOB|IO_VREF_0|UNUSED||0|||||||
-P201||IOB||UNUSED||0|||||||
-P202||IOB||UNUSED||0|||||||
-P203||IOB|IO_VREF_0|UNUSED||0|||||||
-P204||IOB||UNUSED||0|||||||
-P205||IOB|IO_VREF_0|UNUSED||0|||||||
-P206||IOB||UNUSED||0|||||||
-P207|||TCK||||||||||
-P208|||VCCO|||0|||||na||
-
------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
-
-* Default value.
-** This default Pullup/Pulldown value can be overridden in Bitgen.
-*** In some smaller packages, the VCCO bank number of a pin may trail
- the VREF bank number (VCCO,VREF).
-
Index: projects/BtnDemo/BtnDemo_ise5_bak.zip
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: projects/BtnDemo/BtnDemo_ise5_bak.zip
===================================================================
--- projects/BtnDemo/BtnDemo_ise5_bak.zip (revision 430)
+++ projects/BtnDemo/BtnDemo_ise5_bak.zip (nonexistent)