URL https://opencores.org/ocsvn/phr/phr/trunk

Subversion Repositories phr

Compare Revisions

This comparison shows the changes necessary to convert path
```
/phr/trunk/codigo
```
from Rev 80 to Rev 93
↔ Reverse comparison
Compare Path: Rev

With Path: Rev

Rev 80 → Rev 93

/jtag/openocd/arm/openocd.cfg~ File deleted \ No newline at end of file

/jtag/openocd/arm/core.cfg~ File deleted \ No newline at end of file

/jtag/openocd/arm/core.cfg

3,6 → 3,6

/jtag/openocd/arm/out.log

1,185 → 1,534

/jtag/openocd/test/test.svf~ File deleted

/jtag/openocd/test/xc9572xl.cfg~ File deleted

/jtag/openocd/test/test1.svf~ File deleted

jtag/openocd/test/test1.svf~ Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: jtag/openocd/test/ot-cpld.cfg~ =================================================================== --- jtag/openocd/test/ot-cpld.cfg~ (revision 80) +++ jtag/openocd/test/ot-cpld.cfg~ (nonexistent) @@ -1,15 +0,0 @@ -# Configuración para la placa OT-CPLD - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME xc9572xl -} - -#delays on reset lines -jtag_nsrst_delay 1000 -jtag_ntrst_delay 1000 - -jtag newtap $_CHIPNAME tap -irlen 8 -ircapture 0x1 -irmask 3 -expected-id $CPUTAPID - -#jtag_khz 1000 Index: jtag/openocd/arm_trash/openocd.cfg~ =================================================================== --- jtag/openocd/arm_trash/openocd.cfg~ (revision 80) +++ jtag/openocd/arm_trash/openocd.cfg~ (nonexistent) @@ -1,30 +0,0 @@ -# OpenOCD configuration script -# 2013-03-25 lguanuco -# Hardware: -# - OOCD-Link-s - -# ("3": max. verbosity level) -debug_level 3 -# (set log file) -log_output out.log - -# ----------------------- -# 1. Dongle configuration -# -source [find core.cfg] - -# --------------------------------- -# 2. Target processor configuration - -source [find target/lpc2124.cfg] - -# --------------------------------- -# 3. Other configs -# -# Backup: remember default values -#telnet_port 4444 -#gdb_port 3333 - -gdb_memory_map enable -gdb_flash_program enable -init \ No newline at end of file Index: jtag/openocd/cpld/cpld.cfg~ =================================================================== --- jtag/openocd/cpld/cpld.cfg~ (revision 80) +++ jtag/openocd/cpld/cpld.cfg~ (nonexistent) @@ -1,42 +0,0 @@ -#LPC-2124 CPU - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lpc2124 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0x4f1f0f0f -} - - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst srst_pulls_trst - -# reset delays -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -jtag_khz 1000 - -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 - - -#flash bank -flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum Index: jtag/openocd/cpld/openocd.cfg~ =================================================================== --- jtag/openocd/cpld/openocd.cfg~ (revision 80) +++ jtag/openocd/cpld/openocd.cfg~ (nonexistent) @@ -1,30 +0,0 @@ -# OpenOCD configuration script -# 2013-03-25 lguanuco -# Hardware: -# - OOCD-Link-s - -# ("3": max. verbosity level) -debug_level 3 -# (set log file) -log_output out.log - -# ----------------------- -# 1. Dongle configuration -# -source [find core.cfg] - -# --------------------------------- -# 2. Target processor configuration - -source [find target/lpc2124.cfg] - -# --------------------------------- -# 3. Other configs -# -# Backup: remember default values -#telnet_port 4444 -#gdb_port 3333 - -gdb_memory_map enable -gdb_flash_program enable -init \ No newline at end of file Index: jtag/openocd/cpld/cpld.cfg =================================================================== --- jtag/openocd/cpld/cpld.cfg (revision 80) +++ jtag/openocd/cpld/cpld.cfg (revision 93) @@ -1,5 +1,3 @@ -#LPC-2124 CPU - if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -10,7 +8,7 @@ set _CPUTAPID $CPUTAPID } else { # force an error till we get a good number - set _CPUTAPID 0xff541053 + set _CPUTAPID 0xf9604093 } @@ -17,13 +15,7 @@ #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst -# reset delays -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -jtag_khz 10 - #jtag scan chain -jtag newtap $_CHIPNAME tap -irlen 8 -ircapture 0x1 -irmask 0x3 -expected-id $_CPUTAPID +jtag newtap $_CHIPNAME tap -irlen 8 -ircapture 0x1 -irmask 0x3 -expected-id $_CPUTAPID -ignore-version

/jtag/openocd/cpld/openocd.cfg

12,6 → 12,7

/jtag/openocd/cpld/core.cfg

1,8 → 1,5

/jtag/openocd/cpld/out.log

1,1550 → 1,19162

/jtag/openocd/lse/openocd.cfg~ File deleted \ No newline at end of file

jtag/openocd/lse/openocd.cfg~ Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: jtag/openocd/lse/fthl_luis.cfg~ =================================================================== --- jtag/openocd/lse/fthl_luis.cfg~ (revision 80) +++ jtag/openocd/lse/fthl_luis.cfg~ (nonexistent) @@ -1,10 +0,0 @@ -# [fthl.cfg] OpenOCD configuration script for Emtech's "FTHL" -# (FT2232H-based, Joern Kaipf's OOCDLink compatible, USB-JTAG I/F) -# 2012-07 Sebastian Garcia -# -interface ft2232 -ft2232_device_desc "Dual RS232-HS" -ft2232_layout oocdlink -ft2232_vid_pid 0x0403 0x6010 -reset_config srst_only -adapter_khz 10 \ No newline at end of file Index: jtag/openocd/find_tap/openocd.cfg~ =================================================================== --- jtag/openocd/find_tap/openocd.cfg~ (revision 80) +++ jtag/openocd/find_tap/openocd.cfg~ (nonexistent) @@ -1,18 +0,0 @@ -# OpenOCD configuration script -# 2013-03-25 lguanuco -# Hardware: -# - OOCD-Links - -# ("3": max. verbosity level) -debug_level 3 - -# (set log file) -log_output out.log - -# ----------------------- -source [find core.cfg] - -reset_config trst_and_srst - -jtag_rclk 1000 - Index: jtag/openocd/find_tap/core.cfg~ =================================================================== --- jtag/openocd/find_tap/core.cfg~ (revision 80) +++ jtag/openocd/find_tap/core.cfg~ (nonexistent) @@ -1,7 +0,0 @@ -interface ft2232 -ft2232_device_desc -ft2232_layout oocdlink -ft2232_latency 10 -ft2232_vid_pid 0x0403 0x6010 -reset_config srst_only -adapter_khz 1000 \ No newline at end of file Index: jtag/openocd/find_tap/openocd.cfg =================================================================== --- jtag/openocd/find_tap/openocd.cfg (revision 80) +++ jtag/openocd/find_tap/openocd.cfg (revision 93) @@ -3,16 +3,12 @@ # Hardware: # - OOCD-Links -# ("3": max. verbosity level) debug_level 3 - -# (set log file) log_output out.log -# ----------------------- source [find core.cfg] -#source [find ../fpga/spartan3a.cfg] -reset_config trst_and_srst +#reset_config trst_and_srst +adapter_khz 10 +init -

/jtag/openocd/find_tap/core.cfg

1,7 → 1,3

/jtag/openocd/find_tap/out.log

1,112 → 1,99

/jtag/openocd/s3board/devices.cfg

0,0 → 1,31

/jtag/openocd/s3board/openocd.cfg

0,0 → 1,15

/jtag/openocd/s3board/core.cfg

0,0 → 1,4

/jtag/openocd/s3board/out.log

0,0 → 1,121

/jtag/openocd/s3board/prom.cfg

0,0 → 1,21

Browse

Tools

Subversion Repositories phr

Compare Revisions

Rev 80 → Rev 93