OpenCores
URL https://opencores.org/ocsvn/phr/phr/trunk

Subversion Repositories phr

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /phr/trunk/doc/papers
    from Rev 152 to Rev 153
    ↔ Reverse comparison
  •

Rev 152 → Rev 153

/PHR/2014-03-12/bare_jrnl_compsoc.tex
0,0 → 1,844
 
%% bare_jrnl_compsoc.tex
%% V1.3
%% 2007/01/11
%% by Michael Shell
%% See:
%% http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer
%% Society journal paper.
%%
%% Support sites:
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
%% and
%% http://www.ieee.org/
 
%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including **
%% ** renaming them and changing author support contact information. **
%%
%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
%%*************************************************************************
 
% *** Authors should verify (and, if needed, correct) their LaTeX system ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. IEEE's font choices can trigger bugs that do ***
% *** not appear when using other class files. ***
% The testflow support page is at:
% http://www.michaelshell.org/tex/testflow/
 
 
 
 
% Note that the a4paper option is mainly intended so that authors in
% countries using A4 can easily print to A4 and see how their papers will
% look in print - the typesetting of the document will not typically be
% affected with changes in paper size (but the bottom and side margins will).
% Use the testflow package mentioned above to verify correct handling of
% both paper sizes by the user's LaTeX system.
%
% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
% should be used if it is desired that the figures are to be displayed in
% draft mode.
%
% The Computer Society usually requires 12pt for submissions.
%
\documentclass[12pt,journal,compsoc]{IEEEtran}
%
% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[12pt,journal,compsoc]{../sty/IEEEtran}
 
 
 
 
 
% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)
 
 
% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
% % pdf code
% \else
% % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.
 
 
 
 
 
 
% *** CITATION PACKAGES ***
%
\ifCLASSOPTIONcompsoc
% IEEE Computer Society needs nocompress option
% requires cite.sty v4.0 or later (November 2003)
% \usepackage[nocompress]{cite}
\else
% normal IEEE
% \usepackage{cite}
\fi
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
% not currently provide for hyperlinked citations.
% The latest version can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
% The documentation is contained in the cite.sty file itself.
%
% Note that some packages require special options to format as the Computer
% Society requires. In particular, Computer Society papers do not use
% compressed citation ranges as is done in typical IEEE papers
% (e.g., [1]-[4]). Instead, they list every citation separately in order
% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite
% package with the nocompress option which is supported by cite.sty v4.0
% and later. Note also the use of a CLASSOPTION conditional provided by
% IEEEtran.cls V1.7 and later.
 
 
 
 
 
% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
% \usepackage[pdftex]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../pdf/}{../jpeg/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
% or other class option (dvipsone, dvipdf, if not using dvips). graphicx
% will default to the driver specified in the system graphics.cfg if no
% driver is specified.
% \usepackage[dvips]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../eps/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation can
% be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex
 
 
 
 
 
% *** MATH PACKAGES ***
%
%\usepackage[cmex10]{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics. If using
% it, be sure to load this package with the cmex10 option to ensure that
% only type 1 fonts will utilized at all point sizes. Without this option,
% it is possible that some math symbols, particularly those within
% footnotes, will be rendered in bitmap form which will result in a
% document that can not be IEEE Xplore compliant!
%
% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
 
 
 
 
 
% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
% There is also a support site at:
% http://algorithms.berlios.de/index.html
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
 
 
 
 
% *** ALIGNMENT PACKAGES ***
%
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/required/tools/
 
 
%\usepackage{mdwmath}
%\usepackage{mdwtab}
% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
% especially mdwmath.sty and mdwtab.sty which are used to format equations
% and tables, respectively. The MDWtools set is already installed on most
% LaTeX systems. The lastest version and documentation is available at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
 
 
% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.
 
 
%\usepackage{eqparbox}
% Also of notable interest is Scott Pakin's eqparbox package for creating
% (automatically sized) equal width boxes - aka "natural width parboxes".
% Available at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
 
 
 
 
 
% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
%\usepackage[tight,normalsize,sf,SF]{subfigure}
%\else
%\usepackage[tight,footnotesize]{subfigure}
%\fi
% subfigure.sty was written by Steven Douglas Cochran. This package makes it
% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
% work, it is a good idea to load it with the tight package option to reduce
% the amount of white space around the subfigures. Computer Society papers
% use a larger font and \sffamily font for their captions, hence the
% additional options needed under compsoc mode. subfigure.sty is already
% installed on most LaTeX systems. The latest version and documentation can
% be obtained at:
% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
% subfigure.sty has been superceeded by subfig.sty.
 
 
%\ifCLASSOPTIONcompsoc
% \usepackage[caption=false]{caption}
% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
% \usepackage[caption=false]{caption}
% \usepackage[font=footnotesize]{subfig}
%\fi
% subfig.sty, also written by Steven Douglas Cochran, is the modern
% replacement for subfigure.sty. However, subfig.sty requires and
% automatically loads Axel Sommerfeldt's caption.sty which will override
% IEEEtran.cls handling of captions and this will result in nonIEEE style
% figure/table captions. To prevent this problem, be sure and preload
% caption.sty with its "caption=false" package option. This is will preserve
% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
% (recommended due to many improvements over 1.2) of subfig.sty supports
% the caption=false option directly:
%\ifCLASSOPTIONcompsoc
% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
% \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
%
% The latest version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
% The latest version and documentation of caption.sty can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
 
 
 
 
% *** FLOAT PACKAGES ***
%
%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure. The latest version and documentation can be found at:
% http://www.ctan.org/tex-archive/macros/latex/base/
 
 
 
%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
% Documentation is contained in the stfloats.sty comments as well as in the
% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
% does not allow \baselineskip to stretch. Authors submitting work to the
% IEEE should note that IEEE rarely uses double column equations and
% that authors should try to avoid such use. Do not be tempted to use the
% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
% not format its papers in such ways.
 
 
 
 
%\ifCLASSOPTIONcaptionsoff
% \usepackage[nomarkers]{endfloat}
% \let\MYoriglatexcaption\caption
% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
%\fi
% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg.
% This package may be useful when used in conjunction with IEEEtran.cls'
% captionsoff option. Some IEEE journals/societies require that submissions
% have lists of figures/tables at the end of the paper and that
% figures/tables without any captions are placed on a page by themselves at
% the end of the document. If needed, the draftcls IEEEtran class option or
% \CLASSINPUTbaselinestretch interface can be used to increase the line
% spacing as well. Be sure and use the nomarkers option of endfloat to
% prevent endfloat from "marking" where the figures would have been placed
% in the text. The two hack lines of code above are a slight modification of
% that suggested by in the endfloat docs (section 8.3.1) to ensure that
% the full captions always appear in the list of figures/tables - even if
% the user used the short optional argument of \caption[]{}.
% IEEE papers do not typically make use of \caption[]'s optional argument,
% so this should not be an issue. A similar trick can be used to disable
% captions of packages such as subfig.sty that lack options to turn off
% the subcaptions:
% For subfig.sty:
% \let\MYorigsubfloat\subfloat
% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
% For subfigure.sty:
% \let\MYorigsubfigure\subfigure
% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}}
% However, the above trick will not work if both optional arguments of
% the \subfloat/subfig command are used. Furthermore, there needs to be a
% description of each subfigure *somewhere* and endfloat does not add
% subfigure captions to its list of figures. Thus, the best approach is to
% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
% and instead reference/explain all the subfigures within the main caption.
% The latest version of endfloat.sty and its documentation can obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/
%
% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
% later in the document, say, to conditionally put the References on a
% page by themselves.
 
 
 
 
% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version can be obtained at:
% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
% Read the url.sty source comments for usage information. Basically,
% \url{my_url_here}.
 
 
 
 
 
% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex). ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )
 
 
% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}
 
 
\begin{document}
%
% paper title
% can use linebreaks \\ within to get better formatting as desired
\title{Bare Demo of IEEEtran.cls\\ for Computer Society Journals}
%
%
% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
%
%
%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted
% lists the Computer Society journals use for "first footnote" author
% affiliations. Use \IEEEcompsocthanksitem which works much like \item
% for each affiliation group. When not in compsoc mode,
% \IEEEcompsocitemizethanks becomes like \thanks and
% \IEEEcompsocthanksitem becomes a line break with idention. This
% facilitates dual compilation, although admittedly the differences in the
% desired content of \author between the different types of papers makes a
% one-size-fits-all approach a daunting prospect. For instance, compsoc
% journal papers have the author affiliations above the "Manuscript
% received ..." text while in non-compsoc journals this is reversed. Sigh.
 
\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
John~Doe,~\IEEEmembership{Fellow,~OSA,}
and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department
of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
GA, 30332.\protect\\
% note need leading \protect in front of \\ to get a newline within \thanks as
% \\ is fragile and will error, could use \hfil\break instead.
E-mail: see http://www.michaelshell.org/contact.html
\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}}
 
% note the % following the last \IEEEmembership and also \thanks -
% these prevent an unwanted space from occurring between the last author name
% and the end of the author line. i.e., if you had this:
%
% \author{....lastname \thanks{...} \thanks{...} }
% ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
% "AB" then you have to do: "\textbf{A}\textbf{B}"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% Spaces after \IEEEmembership other than the last one are OK (and needed) as
% you are supposed to have spaces between the names. For what it is worth,
% this is a minor point as most people would not even notice if the said evil
% space somehow managed to creep in.
 
 
 
% The paper headers
\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}%
{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Computer Society Journals}
% The only time the second header will appear is for the odd numbered pages
% after the title page when using the twoside option.
%
% *** Note that you probably will NOT want to include the author's ***
% *** name in the headers of peer review papers. ***
% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
% you desire.
 
 
 
% The publisher's ID mark at the bottom of the page is less important with
% Computer Society journal papers as those publications place the marks
% outside of the main text columns and, therefore, unlike regular IEEE
% journals, the available text space is not reduced by their presence.
% If you want to put a publisher's ID mark on the page you can do it like
% this:
%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE}
% or like this to get the Computer Society new two part style.
%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}%
%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}}
% Remember, if you use this you must call \IEEEpubidadjcol in the second
% column for its text to clear the IEEEpubid mark (Computer Society jorunal
% papers don't need this extra clearance.)
 
 
 
% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}
 
 
 
% for Computer Society papers, we must declare the abstract and index terms
% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran
% command as these need to go into the title area created by \maketitle.
\IEEEcompsoctitleabstractindextext{%
\begin{abstract}
%\boldmath
The abstract goes here.
\end{abstract}
% IEEEtran.cls defaults to using nonbold math in the Abstract.
% This preserves the distinction between vectors and scalars. However,
% if the journal you are submitting to favors bold math in the abstract,
% then you can use LaTeX's standard command \boldmath at the very start
% of the abstract to achieve this. Many IEEE journals frown on math
% in the abstract anyway. In particular, the Computer Society does
% not want either math or citations to appear in the abstract.
 
% Note that keywords are not normally used for peerreview papers.
\begin{IEEEkeywords}
Computer Society, IEEEtran, journal, \LaTeX, paper, template.
\end{IEEEkeywords}}
 
 
% make the title area
\maketitle
 
 
% To allow for easy dual compilation without having to reenter the
% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will
% not be used in maketitle, but will appear (i.e., to be "transported")
% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode
% is not selected <OR> if conference mode is selected - because compsoc
% conference papers position the abstract like regular (non-compsoc)
% papers do!
\IEEEdisplaynotcompsoctitleabstractindextext
% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using
% compsoc under a non-conference mode.
 
 
% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle
 
 
 
\section{Introduction}
% Computer Society journal papers do something a tad strange with the very
% first section heading (almost always called "Introduction"). They place it
% ABOVE the main text! IEEEtran.cls currently does not do this for you.
% However, You can achieve this effect by making LaTeX jump through some
% hoops via something like:
%
%\ifCLASSOPTIONcompsoc
% \noindent\raisebox{2\baselineskip}[0pt][0pt]%
% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}%
% \global\everypar=\everypar}}%
% \vspace{-1\baselineskip}\vspace{-\parskip}\par
%\else
% \section{Introduction}\label{sec:introduction}\par
%\fi
%
% Admittedly, this is a hack and may well be fragile, but seems to do the
% trick for me. Note the need to keep any \label that may be used right
% after \section in the above as the hack puts \section within a raised box.
 
 
 
% The very first letter is a 2 line initial drop letter followed
% by the rest of the first word in caps (small caps for compsoc).
%
% form to use if the first word consists of a single letter:
% \IEEEPARstart{A}{demo} file is ....
%
% form to use if you need the single drop letter followed by
% normal text (unknown if ever used by IEEE):
% \IEEEPARstart{A}{}demo file is ....
%
% Some journals put the first two words in caps:
% \IEEEPARstart{T}{his demo} file is ....
%
% Here we have the typical use of a "T" for an initial drop letter
% and "HIS" in caps to complete the first word.
\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
for IEEE Computer Society journal papers produced under \LaTeX\ using
IEEEtran.cls version 1.7 and later.
% You must have at least 2 lines in the paragraph with the drop letter
% (should never be an issue)
I wish you the best of success.
 
\hfill mds
\hfill January 11, 2007
 
\subsection{Subsection Heading Here}
Subsection text here.
 
% needed in second column of first page if using \IEEEpubid
%\IEEEpubidadjcol
 
\subsubsection{Subsubsection Heading Here}
Subsubsection text here.
 
 
% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
%\begin{figure}[!t]
%\centering
%\includegraphics[width=2.5in]{myfigure}
% where an .eps filename suffix will be assumed under latex,
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
%\caption{Simulation Results}
%\label{fig_sim}
%\end{figure}
 
% Note that IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.
% However, the Computer Society has been known to put floats at the bottom.
 
 
% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command, the
% \label for the overall figure must come after \caption.
% \hfil must be used as a separator to get equal spacing.
% The subfigure.sty package works much the same way, except \subfigure is
% used instead of \subfloat.
%
%\begin{figure*}[!t]
%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
%\label{fig_second_case}}}
%\caption{Simulation results}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.
 
 
% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table. Table text will default to
% \footnotesize as IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
%\begin{table}[!t]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
%\caption{An Example of a Table}
%\label{table_example}
%\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
%\begin{tabular}{|c||c|}
%\hline
%One & Two\\
%\hline
%Three & Four\\
%\hline
%\end{tabular}
%\end{table}
 
 
% Note that IEEE does not put floats in the very first column - or typically
% anywhere on the first page for that matter. Also, in-text middle ("here")
% positioning is not used. Most IEEE journals use top floats exclusively.
% However, Computer Society journals sometimes do use bottom floats - bear
% this in mind when choosing appropriate optional arguments for the
% figure/table environments.
% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom
% floats. This can be corrected via the \fnbelowfloat command of the
% stfloats package.
 
 
 
\section{Conclusion}
The conclusion goes here.
 
 
 
 
 
% if have a single appendix:
%\appendix[Proof of the Zonklar Equations]
% or
%\appendix % for no appendix heading
% do not use \section anymore after \appendix, only \section*
% is possibly needed
 
% use appendices with more than one appendix
% then use \section to start each appendix
% you must declare a \section before using any
% \subsection or using \label (\appendices by itself
% starts a section numbered zero.)
%
 
 
\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
 
% you can choose not to have a title for an appendix
% if you want by leaving the argument blank
\section{}
Appendix two text goes here.
 
 
% use section* for acknowledgement
\ifCLASSOPTIONcompsoc
% The Computer Society usually uses the plural form
\section*{Acknowledgments}
\else
% regular IEEE prefers the singular form
\section*{Acknowledgment}
\fi
 
 
The authors would like to thank...
 
 
% Can use something like this to put references on a page
% by themselves when using endfloat and the captionsoff option.
\ifCLASSOPTIONcaptionsoff
\newpage
\fi
 
 
 
% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}
 
% references section
 
% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
\begin{thebibliography}{1}
 
\bibitem{IEEEhowto:kopka}
H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus
0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
 
\end{thebibliography}
 
% biography section
%
% If you have an EPS/PDF photo (graphicx package needed) extra braces are
% needed around the contents of the optional argument to biography to prevent
% the LaTeX parser from getting confused when it sees the complicated
% \includegraphics command within an optional argument. (You could create
% your own custom macro containing the \includegraphics command to make things
% simpler here.)
%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
% or if you just want to reserve a space for a photo:
 
\begin{IEEEbiography}{Michael Shell}
Biography text here.
\end{IEEEbiography}
 
% if you will not have a photo at all:
\begin{IEEEbiographynophoto}{John Doe}
Biography text here.
\end{IEEEbiographynophoto}
 
% insert where needed to balance the two columns on the last page with
% biographies
%\newpage
 
\begin{IEEEbiographynophoto}{Jane Doe}
Biography text here.
\end{IEEEbiographynophoto}
 
% You can push biographies down or up by placing
% a \vfill before or after them. The appropriate
% use of \vfill depends on what kind of text is
% on the last page and whether or not the columns
% are being equalized.
 
%\vfill
 
% Can be used to pull up biographies so that the bottom of the last one
% is flush with the other column.
%\enlargethispage{-5in}
 
 
 
% that's all folks
\end{document}
 
 
PHR/2014-03-12/bare_jrnl_compsoc.tex Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Rev URL \ No newline at end of property Index: PHR/2014-03-12/bare_adv.tex =================================================================== --- PHR/2014-03-12/bare_adv.tex (nonexistent) +++ PHR/2014-03-12/bare_adv.tex (revision 153) @@ -0,0 +1,1100 @@ + +%% bare_adv.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the advanced use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer +%% Society journal paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + + +% IEEEtran V1.7 and later provides for these CLASSINPUT macros to allow the +% user to reprogram some IEEEtran.cls defaults if needed. These settings +% override the internal defaults of IEEEtran.cls regardless of which class +% options are used. Do not use these unless you have good reason to do so as +% they can result in nonIEEE compliant documents. User beware. ;) +% +%\newcommand{\CLASSINPUTbaselinestretch}{1.0} % baselinestretch +%\newcommand{\CLASSINPUTinnersidemargin}{1in} % inner side margin +%\newcommand{\CLASSINPUToutersidemargin}{1in} % outer side margin +%\newcommand{\CLASSINPUTtoptextmargin}{1in} % top text margin +%\newcommand{\CLASSINPUTbottomtextmargin}{1in}% bottom text margin + + + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[12pt,journal,compsoc]{IEEEtran} +% The Computer Society requires 12pt. +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[10pt,journal,compsoc]{../sty/IEEEtran} + + +% For Computer Society journals, IEEEtran defaults to the use of +% Palatino/Palladio as is done in IEEE Computer Society journals. +% To go back to Times Roman, you can use this code: +%\renewcommand{\rmdefault}{ptm}\selectfont + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +\ifCLASSOPTIONcompsoc + % IEEE Computer Society needs nocompress option + % requires cite.sty v4.0 or later (November 2003) + % \usepackage[nocompress]{cite} +\else + % normal IEEE + % \usepackage{cite} +\fi +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. +% +% Note that some packages require special options to format as the Computer +% Society requires. In particular, Computer Society papers do not use +% compressed citation ranges as is done in typical IEEE papers +% (e.g., [1]-[4]). Instead, they list every citation separately in order +% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite +% package with the nocompress option which is supported by cite.sty v4.0 +% and later. Note also the use of a CLASSOPTION conditional provided by +% IEEEtran.cls V1.7 and later. + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + +%\usepackage{ps4pdf} +% dvi->ps workflow is required to use such packages as psfrag.sty and +% pstricks.sty. However, Rolf Niepraschk's ps4pdf.sty provides a way to +% apply psfrag/pstricks effects to .eps figures and then get the resultant +% figures in .pdf form. Thus, providing an easier way for migrating from +% .eps to .pdf figures. After ps4pdf.sty loads, if: +% 1. producing .dvi output: the output file will consist ONLY of the +% figures (or other constructs encased within \PSforPDF commands) +% 2. producing .pdf output: pdflatex will look in the filename-pics.pdf +% file, where filename is the basename of the tex document, for the +% graphics (or other constructs encased within \PSforPDF commands). +% NOTE: If you ever change your figures, you must remember to remake +% the filename-pics.pdf file. +% +% This way you can do a: +% +% latex filename +% dvips -Ppdf -o filename-pics.ps filename.dvi +% ps2pdf filename-pics.ps filename-pics.pdf +% +% to produce a filename-pics.pdf graphics container that contains +% .pdf versions of the graphics with psfrag, pstricks, etc. features. +% Note that you will not typically be able to view the figures in +% filename-pics.ps because of an offset. However, you will be able to +% view them in filename-pics.pdf. Also, note that when ps4pdf is in effect +% with .dvi output, you may get harmless over/under full box warnings - +% ignore them. +% Then, run pdflatex: +% +% pdflatex filename +% +% to use pdflatex to make PDF output, automatically using the figures in +% filename-pics.pdf. Alternatively, you could use dvips -i option to +% obtain separate .pdf files for each figure: +% +% dvips -Ppdf -i -E -o fig filename +% +% then convert each figure to pdf via a command such as epstopdf and then +% use pdflatex with these pdf figures and then to dispense with ps4pdf. +% +% Remember to rerun through latex/dvips/ps2pdf if you ever change your +% figures so that filename-pics.pdf gets updated. +% ps4pdf requires David Kastrup's preview-latex and a recent LaTeX system +% (circa 2001 or later). The ps4pdf package and documentation can be +% obtained at: http://www.ctan.org/tex-archive/macros/latex/contrib/ps4pdf/ +% The preview-latex package and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/preview/ +% +% provide a bogus \PSforPDF, even when not loading pd4pdf. This way we can +% stop loading ps4pdf.sty if we choose to make separate .pdf versions of +% each of our figures. +\providecommand{\PSforPDF}[1]{#1} +% Note that in order for ps4pdf to work, all commands related to psfrag, +% pstricks, etc. must be called within the PSforPDF command. This applies +% even when *loading* via \usepackage psfrag.sty, etc. + + +%\PSforPDF{\usepackage{psfrag}} +% psfrag.sty was written by Craig Barratt, Michael C. Grant, and +% David Carlisle. It allows you to substitute LaTeX commands for text in +% imported EPS graphic files. In this way, LaTeX symbols can be placed into +% graphics that have been generated by other applications. You must use +% latex->dvips->ps2pdf workflow (not direct pdf output from pdflatex) if +% you wish to use this capability because it works via some PostScript +% tricks. Alternatively, the graphics could be processed as separate files +% via psfrag and dvips, then converted to PDF for inclusion in the main file +% which uses pdflatex. ps4pdf.sty (above) provides a way of doing this all +% at once within the main file. +% Docs are in "The PSfrag System" by Michael C. Grant and David Carlisle. +% There is also some information about using psfrag in "Using Imported +% Graphics in LaTeX2e" by Keith Reckdahl which documents the graphicx +% package (see above). The psfrag package and documentation can be obtained +% at: http://www.ctan.org/tex-archive/macros/latex/contrib/psfrag/ +% +% Note that the current version of psfrag does not "turn itself off" when +% running under pdf output. This will result in a harmless warning +% about a non-PDF \special. However, to silence this, a bogus psfrag +% command can be provided instead of loading psfrag.sty when PDF output +% is being used. Thus, a more complex alternative conditional loading scheme +% can be employed instead of the straightforword way above: +% +%\ifCLASSINFOpdf +% if outputting PDF, do not use or load psfrag.sty as current versions +% output a non-PDF special that generates a harmless, but annoying warning. +% Instead, we provide a bogus \psfrag command that does nothing with +% its arguments. This is a tad tricky because \psfrag can have up to six +% arguments four of which are optional: \psfrag{}[][][][]{} +% Code based on that in psfrag.sty +%\makeatletter +%\def\psfrag{\@ifstar{\@BOGUSpsfraga}{\@BOGUSpsfraga}} +%\def\@BOGUSpsfraga{\begingroup +% \@makeother\"\@makeother\*\@makeother\!\@makeother\~% +% \@makeother\:\@makeother\\\@makeother\%\@makeother\#% +% \@makeother\ \@BOGUSpsfragb} +%\def\@BOGUSpsfragb#1{\endgroup +% \@ifnextchar [{\@BOGUSpsfragc}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragc[#1]{\@ifnextchar [{\@BOGUSpsfragd}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragd[#1]{\@ifnextchar [{\@BOGUSpsfrage}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfrage[#1]{\@ifnextchar [{\@BOGUSpsfragf}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragf[#1]{\@BOGUSpsfrag} +%\def\@BOGUSpsfrag#1{\ignorespaces} +%\makeatother +%\else +% using dvi output, load psfrag, but funnel it through PSforPDF +% as required by ps4pdf.sty +%\PSforPDF{\usepackage{psfrag}} +%\fi + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +%\usepackage{acronym} +% acronym.sty was written by Tobias Oetiker. This package provides tools for +% managing documents with large numbers of acronyms. (You don't *have* to +% use this package - unless you have a lot of acronyms, you may feel that +% such package management of them is bit of an overkill.) +% Do note that the acronym environment (which lists acronyms) will have a +% problem when used under IEEEtran.cls because acronym.sty relies on the +% description list environment - which IEEEtran.cls has customized for +% producing IEEE style lists. A workaround is to declared the longest +% label width via the IEEEtran.cls \IEEEiedlistdecl global control: +% +% \renewcommand{\IEEEiedlistdecl}{\IEEEsetlabelwidth{SONET}} +% \begin{acronym} +% +% \end{acronym} +% \renewcommand{\IEEEiedlistdecl}{\relax}% remember to reset \IEEEiedlistdecl +% +% instead of using the acronym environment's optional argument. +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/acronym/ + + +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\ifCLASSOPTIONcompsoc +%\usepackage[tight,normalsize,sf,SF]{subfigure} +%\else +%\usepackage[tight,footnotesize]{subfigure} +%\fi +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. Computer Society papers +% use a larger font and \sffamily font for their captions, hence the +% additional options needed under compsoc mode. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false]{caption} +% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false]{caption} +% \usepackage[font=footnotesize]{subfig} +%\fi +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false,font=footnotesize]{subfig} +%\fi +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + +% NOTE: PDF thumbnail features are not required in IEEE papers +% and their use requires extra complexity and work. +%\ifCLASSINFOpdf +% \usepackage[pdftex]{thumbpdf} +%\else +% \usepackage[dvips]{thumbpdf} +%\fi +% thumbpdf.sty and its companion Perl utility were written by Heiko Oberdiek. +% It allows the user a way to produce PDF documents that contain fancy +% thumbnail images of each of the pages (which tools like acrobat reader can +% utilize). This is possible even when using dvi->ps->pdf workflow if the +% correct thumbpdf driver options are used. thumbpdf.sty incorporates the +% file containing the PDF thumbnail information (filename.tpm is used with +% dvips, filename.tpt is used with pdftex, where filename is the base name of +% your tex document) into the final ps or pdf output document. An external +% utility, the thumbpdf *Perl script* is needed to make these .tpm or .tpt +% thumbnail files from a .ps or .pdf version of the document (which obviously +% does not yet contain pdf thumbnails). Thus, one does a: +% +% thumbpdf filename.pdf +% +% to make a filename.tpt, and: +% +% thumbpdf --mode dvips filename.ps +% +% to make a filename.tpm which will then be loaded into the document by +% thumbpdf.sty the NEXT time the document is compiled (by pdflatex or +% latex->dvips->ps2pdf). Users must be careful to regenerate the .tpt and/or +% .tpm files if the main document changes and then to recompile the +% document to incorporate the revised thumbnails to ensure that thumbnails +% match the actual pages. It is easy to forget to do this! +% +% Unix systems come with a Perl interpreter. However, MS Windows users +% will usually have to install a Perl interpreter so that the thumbpdf +% script can be run. The Ghostscript PS/PDF interpreter is also required. +% See the thumbpdf docs for details. The latest version and documentation +% can be obtained at. +% http://www.ctan.org/tex-archive/support/thumbpdf/ +% Be sure and use only version 3.8 (2005/07/06) or later of thumbpdf as +% earlier versions will not work properly with recent versions of pdfTeX +% (1.20a and later). + + +% NOTE: PDF hyperlink and bookmark features are not required in IEEE +% papers and their use requires extra complexity and work. +% *** IF USING HYPERREF BE SURE AND CHANGE THE EXAMPLE PDF *** +% *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!! *** +\newcommand\MYhyperrefoptions{bookmarks=true,bookmarksnumbered=true, +pdfpagemode={UseOutlines},plainpages=false,pdfpagelabels=true, +colorlinks=true,linkcolor={black},citecolor={black},pagecolor={black}, +urlcolor={black}, +pdftitle={Bare Demo of IEEEtran.cls for Computer Society Journals},%.dvi->.ps->.pdf workflow if the respective packages/scripts are +% loaded/invoked with the correct driver options (dvips, etc.). +% As most IEEE papers use URLs sparingly (mainly in the references), this +% may not be as big an issue as with other publications. +% +% That said, recently Vilar Camara Neto introduced his breakurl.sty +% package which permits hyperref to easily break URLs even in dvi +% mode. Note that breakurl, unlike most other packages, must be loaded +% AFTER hyperref. The latest version of breakurl and its documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/breakurl/ +% breakurl.sty is not for use under pdflatex pdf mode. Versions 1.10 +% (September 23, 2005) and later are recommened to avoid bugs in earlier +% releases. +% +% The advanced features offer by hyperref.sty are not required for IEEE +% submission, so users should weigh these features against the added +% complexity of use. Users who wish to use hyperref *must* ensure that +% their hyperref version is 6.72u or later *and* IEEEtran.cls is version +% 1.6b or later. +% The package options above demonstrate how to enable PDF bookmarks +% (a type of table of contents viewable in Acrobat Reader) as well as +% PDF document information (title, subject, author and keywords) that is +% viewable in Acrobat reader's Document_Properties menu. PDF document +% information is also used extensively to automate the cataloging of PDF +% documents. The above set of options ensures that hyperlinks will not be +% colored in the text and thus will not be visible in the printed page, +% but will be active on "mouse over". USING COLORS OR OTHER HIGHLIGHTING +% OF HYPERLINKS CAN RESULT IN DOCUMENT REJECTION BY THE IEEE, especially if +% these appear on the "printed" page. IF IN DOUBT, ASK THE RELEVANT +% SUBMISSION EDITOR. You may need to add the option hypertexnames=false if +% you used duplicate equation numbers, etc., but this should not be needed +% in normal IEEE work. +% The latest version of hyperref and its documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/hyperref/ + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Advanced Demo of IEEEtran.cls\\ for Computer Society Journals} +% +% +% author names and IEEE memberships +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% +% +%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted +% lists the Computer Society journals use for "first footnote" author +% affiliations. Use \IEEEcompsocthanksitem which works much like \item +% for each affiliation group. When not in compsoc mode, +% \IEEEcompsocitemizethanks becomes like \thanks and +% \IEEEcompsocthanksitem becomes a line break with idention. This +% facilitates dual compilation, although admittedly the differences in the +% desired content of \author between the different types of papers makes a +% one-size-fits-all approach a daunting prospect. For instance, compsoc +% journal papers have the author affiliations above the "Manuscript +% received ..." text while in non-compsoc journals this is reversed. Sigh. + +\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} + John~Doe,~\IEEEmembership{Fellow,~OSA,} + and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space +\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department +of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332.\protect\\ +% note need leading \protect in front of \\ to get a newline within \thanks as +% \\ is fragile and will error, could use \hfil\break instead. +E-mail: see http://www.michaelshell.org/contact.html +\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space +\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}} + +% note the % following the last \IEEEmembership and also \thanks - +% these prevent an unwanted space from occurring between the last author name +% and the end of the author line. i.e., if you had this: +% +% \author{....lastname \thanks{...} \thanks{...} } +% ^------------^------------^----Do not want these spaces! +% +% a space would be appended to the last name and could cause every name on that +% line to be shifted left slightly. This is one of those "LaTeX things". For +% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get +% "AB" then you have to do: "\textbf{A}\textbf{B}" +% \thanks is no different in this regard, so shield the last } of each \thanks +% that ends a line with a % and do not let a space in before the next \thanks. +% Spaces after \IEEEmembership other than the last one are OK (and needed) as +% you are supposed to have spaces between the names. For what it is worth, +% this is a minor point as most people would not even notice if the said evil +% space somehow managed to creep in. + + + +% The paper headers +\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Advanced Demo of IEEEtran.cls for Journals} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% +% *** Note that you probably will NOT want to include the author's *** +% *** name in the headers of peer review papers. *** +% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if +% you desire. + + + +% The publisher's ID mark at the bottom of the page is less important with +% Computer Society journal papers as those publications place the marks +% outside of the main text columns and, therefore, unlike regular IEEE +% journals, the available text space is not reduced by their presence. +% If you want to put a publisher's ID mark on the page you can do it like +% this: +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE} +% or like this to get the Computer Society new two part style. +%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}% +%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}} +% Remember, if you use this you must call \IEEEpubidadjcol in the second +% column for its text to clear the IEEEpubid mark (Computer Society jorunal +% papers don't need this extra clearance.) + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + +% for Computer Society papers, we must declare the abstract and index terms +% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran +% command as these need to go into the title area created by \maketitle. +\IEEEcompsoctitleabstractindextext{% +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the journal you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals frown on math +% in the abstract anyway. In particular, the Computer Society does +% not want either math or citations to appear in the abstract. + +% Note that keywords are not normally used for peerreview papers. +\begin{IEEEkeywords} +Computer Society, IEEEtran, journal, \LaTeX, paper, template. +\end{IEEEkeywords}} + + +% make the title area +\maketitle + + +% To allow for easy dual compilation without having to reenter the +% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will +% not be used in maketitle, but will appear (i.e., to be "transported") +% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode +% is not selected if conference mode is selected - because compsoc +% conference papers position the abstract like regular (non-compsoc) +% papers do! +\IEEEdisplaynotcompsoctitleabstractindextext +% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using +% compsoc under a non-conference mode. + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% Computer Society journal papers do something a tad strange with the very +% first section heading (almost always called "Introduction"). They place it +% ABOVE the main text! IEEEtran.cls currently does not do this for you. +% However, You can achieve this effect by making LaTeX jump through some +% hoops via something like: +% +%\ifCLASSOPTIONcompsoc +% \noindent\raisebox{2\baselineskip}[0pt][0pt]% +% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}% +% \global\everypar=\everypar}}% +% \vspace{-1\baselineskip}\vspace{-\parskip}\par +%\else +% \section{Introduction}\label{sec:introduction}\par +%\fi +% +% Admittedly, this is a hack and may well be fragile, but seems to do the +% trick for me. Note the need to keep any \label that may be used right +% after \section in the above as the hack puts \section within a raised box. + + + +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps (small caps for compsoc). +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for IEEE Computer Society journal papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. +% However, the Computer Society has been known to put floats at the bottom. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% However, Computer Society journals sometimes do use bottom floats - bear +% this in mind when choosing appropriate optional arguments for the +% figure/table environments. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Proof of the First Zonklar Equation} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\ifCLASSOPTIONcompsoc + % The Computer Society usually uses the plural form + \section*{Acknowledgments} +\else + % regular IEEE prefers the singular form + \section*{Acknowledgment} +\fi + + +The authors would like to thank... + + +% Can use something like this to put references on a page +% by themselves when using endfloat and the captionsoff option. +\ifCLASSOPTIONcaptionsoff + \newpage +\fi + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section +% +% If you have an EPS/PDF photo (graphicx package needed) extra braces are +% needed around the contents of the optional argument to biography to prevent +% the LaTeX parser from getting confused when it sees the complicated +% \includegraphics command within an optional argument. (You could create +% your own custom macro containing the \includegraphics command to make things +% simpler here.) +%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell} +% or if you just want to reserve a space for a photo: + +\begin{IEEEbiography}{Michael Shell} +Biography text here. +\end{IEEEbiography} + +% if you will not have a photo at all: +\begin{IEEEbiographynophoto}{John Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{Jane Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% You can push biographies down or up by placing +% a \vfill before or after them. The appropriate +% use of \vfill depends on what kind of text is +% on the last page and whether or not the columns +% are being equalized. + +%\vfill + +% Can be used to pull up biographies so that the bottom of the last one +% is flush with the other column. +%\enlargethispage{-5in} + + + +% that's all folks +\end{document} + +
PHR/2014-03-12/bare_adv.tex Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Rev URL \ No newline at end of property Index: PHR/2014-03-12/bare_conf.pdf =================================================================== --- PHR/2014-03-12/bare_conf.pdf (nonexistent) +++ PHR/2014-03-12/bare_conf.pdf (revision 153) @@ -0,0 +1,537 @@ +%PDF-1.4 +% +3 0 obj << +/Length 1461 +/Filter /FlateDecode +>> +stream +xWYoF~ϯ# ۽STKI8Gm aMe"hك2h@=ffv/$[P2bs )%b1zW^6N 8*m-&8m4yS˜nVTa^aϛ #" +θI.PJ#B2?2L.\c*tVue:ݙJ0DYSbiH;DDˠ^ʪI +eo2CjIJ@1E\Iޚ43QM`Dg0%k}P lNlMjh2~.st +˘wkiЅ?n+T^7>X*C"?y鴼yH$G {J< (D@ +rm!DIcU[ƹy ݶ9b@fHWcZ|i{0m3Q'\:^xMI+#a ُC5ΩOC&)8VK,1x;} gz5Y8bbPA3"Yt:7T/.G3`̙PTU{`P 'KdmS(r'ޓ:<Q`=`sU9-gsEqc +!0Vv XP mj8xۘ$ E9rB WW{"id rkk\Ovm, zZ!Az6~bʱt:d?2rXt<ۃw!g`-j)RIP|$v/#q.&Da8C,ExCĶU~t41bYfϡ>@&#.}U83q%iqf(|2aPG pYŤ۶};K= .pmRl#2ZQe8taTaKge"֛GZ+ +endstream +endobj +2 0 obj << +/Type /Page +/Contents 3 0 R +/Resources 1 0 R +/MediaBox [0 0 595.276 841.89] +/Parent 8 0 R +>> endobj +1 0 obj << +/Font << /F63 4 0 R /F66 5 0 R /F67 6 0 R /F70 7 0 R >> +/ProcSet [ /PDF /Text ] +>> endobj +10 0 obj +[333 250 278 500 500 500 500 500 500 500 500 500 500 333 333 675 675 675 500 920 611 611 667 722 611 611 722 722 333 444 667 556 833 667 722 611 722 611 500 556 722 611 833 611 556 556 389 278 389 422 500 333 500 500 444 500 444 278 500 500 278 278 444 278 722 500 500 500 500 389 389 278 500] +endobj +11 0 obj +[278 0 0 0 0 0 0 0 0 0 0 0 0 333 278 250 333 555 500 500 1000 833 333 333 333 500 570 250 333 250 278 500 500 500 500 500 500 500 500 500 500 333 333 570 570 570 500 930 722 667 722 722 667 611 778 778 389 500 778 667 944 722 778 611 778 722 556 667 722 722 1000 722 722 667 333 278 333 581 500 333 500 556 444 556 444 333 500 556 278 333 556 278 833 556 500 556 556 444 389 333 556 500 722 500 500 444 394 220 394 520 0 0 0 333 500 500 1000 500 500 333 1000 556 333 1000 0 0 0 0 0 0 500 500 350 500 1000 333 1000 389 333 722 0 0 722 0 333 500 500 500 500 220 500 333 747 300 500 570 333 747 333 400 570 300 300 333] +endobj +12 0 obj +[667 556 611 722 667 889 667 611 611 333 278 333 570 500 333 500 500 444 500 444 333 500 556 278 278 500 278 778 556 500 500 500 389 389 278 556] +endobj +13 0 obj +[556 556 167 333 611 278 333 333 0 333 564 0 611 444 333 278 0 0 0 0 0 0 0 0 0 0 0 0 333 180 250 333 408 500 500 833 778 333 333 333 500 564 250 333 250 278 500 500 500 500 500 500 500 500 500 500 278 278 564 564 564 444 921 722 667 667 722 611 556 722 722 333 389 722 611 889 722 722 556 722 667 556 611 722 722 944 722 722 611 333 278 333 469 500 333 444 500 444 500 444 333 500 500 278 278 500 278 778 500 500 500 500 333 389 278 500 500 722 500 500 444 480 200 480 541 0 0 0 333 500 444 1000 500 500 333 1000 556 333 889 0 0 0 0 0 0 444 444 350 500 1000 333 980 389 333 722 0 0 722 0 333 500 500 500 500 200 500 333 760 276 500 564 333 760 333 400 564 300 300 333] +endobj +14 0 obj << +/Length1 1626 +/Length2 6813 +/Length3 0 +/Length 7642 +/Filter /FlateDecode +>> +stream +xڭWgTSK1 (=HE:HKH:"]@ޤ(KG#IS~s̟u]u;4i S@"0|@u3Z頎WUA@\] 90`G@qqqRv,isrsKh + +F9/.0{$`Cu`0 À0 ltCp qN@@. +͇%h Ǻ 0osrw  +v#0`@8b ++BrBb-:l0M$8Q 6_816`h8V +DZa-HaZ @107\0 FكݱPN?0p``'= Ɔݝ /ՃQ({??VǠaV|9!lnk8l( +oHbeԝ[8TY[q':z:ZWӢH% [,w *( +Ge<%ixfU2*ĀoKYO~2ǹrZeu_p߲ED`{׎IEAʂXeWqxH8a(۷[XBja&c |÷=9O#: +9fͺO[:1mKNJ;N^cph];w?=_.xΈ*,葟SB$KzFh,FLgRG8,^J>GNLzyob%旚|*Ӕxb?.qї]ȠL"Lt*zъ +Yrjk(0]tقMoErٝ*S6lͯ{Q}osjv=k@x1L[ZVrvF;|2&m=if'_5֖3rlRet7iWXdqt}$"s +/+oL]^/5,dC_Z|b"t:\}kZ;<6U8]4ң'jH?ngd?]ujp*zM.@P^GܨA|8#z7~qPScwd!wZrVSZ2~8Dk0.yj݄R-n J伔uwj,O҄9Ul[Ӫm-Qᠡa9M4/)<ĭ+>W󚬩Ax,$Ǎh$5bG&"K5#ҍQ*qZܰƀ[% +?qev:BsV8}'y3:UhEҥCBEq8~AM#[LХh\Au3^]gRTLj0^WfQ g)AԔSW|6[0f @Љvٙ96871bISYKըyyNd)c[7*׆¶քQ>@9_Mч8ijTHUH |j%)6 8'@9VmCIX`۟ZP\5%W|߈b6hIŲØΓΕnO,*߹nMvQ]Y4wEsCY +?յ~ +8Μn61[n* ] Sk<2KHH66Qqf)_x("bV'jlkEK5:R R.|iz#5{F&9~%7* +ک0Gg[EBY9f`@ 6byaܼ$x~hlj)Y=)ITm/t?l1ȽP Ϧ4~4-~< 8'7zewO<[m'3f|yԛIS;~ċ̒5mvEm|ʴdtPTM)v-s:jvq#J# ,UxqE;]Cup6BV3d|kf m~k+⨅#Q+L&w=90GPyjqiPLd +ov]{SnBJPb6dz&C/#GŽ&lj7!,)~DЈnVnQ\QFG8,|=iREhdZ-OK6jNxYy㥄xu!E9G5ˍ;o쥗"v%`RwD˦ɔB\Z,XӶ%=cޛkp +썩rfLs7צF +&]mbdj߯,̚þףu-k>K׹OT_>cD.h*}G{LLbGI9XUem6FG3rƨXOEq(Dj +bp)D=gHb WWvs~Q6D5Á*a +kqD FN㶭(ӥ?AS՚#1} D~M1#4walXOŚAzVG(Uh\ڈN #SpͯWMԵŎ$ +dkxyxw +LJtFo#gv\SܤFv}5weEK>/[ݭ3h&Ra2`MlYr_gWi>n Z@%M<(/=w@%6NAt+BBI;~x9zJ/#iVBTZpQ,8Mu +sy$/ߌ⥖~E{׵Al!WZgPõ!>+d+w\#rLnYsy*#|w<;!֭0/\. ܳ[=<}LPm*CUߒl:Měa:Ha +Sc/O˱dBrUhE")ۥ%`y"Ԛ#X)O=gk(*֧4q=0]:Q$-mTN$ulh~<} $69{uX0}$kY{i]*sYn ߎ>aH82-6{ln^=f?DCͥ-{nFz@a*^p<(ӥ*QVS&=D؜н'`o;.WE -'?n~Wqbrb*\%G/1n5`ʽQzbAp 5?gU$pEt.[Şؙp":SMm/Yx+[:1Y%_d}?qʪګ +ocUu(^5;! +1B}Үy=(Vv[^\W!,t^7ĬLXYt~b` +҅2h9#U]&m[wU%E(|xGNyf>LtNV6j-*a?u:[eJ'{?X*2C.LmSJ<웄rͧc/}?~Vo|;3mH).Bn:VF% GukPݎM Cox< +47.MnߏCҪ'J҂OHhB5^3tayڝ1hұé*ɈlPp "igdӾvq8z2aq Z!z-LmjMR$#C_\=!?_{萿'QPZ4)"F`X _$:ECN|[!y*:iߔ5DDMDj֜:hiڝ0wT̓#ߏV + H۾XQR$L]h.ǒF6%dV.]6eSa2EcEҝ禯Up!-DϳrKEHc&I-s~`Qrl}AN,֒+U!Vqӕ6M9ԯ|~\u_*ǫjxܰ.} ֙|A)D>[j}:x#n&0ުlkwD~z1YpKbV'Mө_\f9_N9c#ݮ6D.{ɳUgD{ؼ6g1RyG=@`C)񇼺-V|bmA!s߯WPg;g\y^+O +S:"b<'di]9{-ihLp|Ԯg(RvVpxzo'-RôMj += w" +ܥlQzeI\m?sTs/G11;7֝-8x:s}M6,DRB/W!A]|'')J"I +MsvN93NGBCkw#x?MVbogvK,>u80ޠWb C ѻyf}3Z=!fA7aLwva}'g AzCKCx}&W `MdNqJue.&OBrd뵈p=Y% +7JK}6(T#dqKl[ga[V*Rspힹ>3_\C;O4'ʬzW_ nR^;M̉gi/0\ߑHO^_)#.VI|n[^j'~F=B>.mxftvM(I)vt4Z4eb2XQ4M>GnS;?u5Zptcc~GM I3e,]hʛ <*1eU4`§ET= ĉ;􌕀\xBtKJ$"v& |q +wBfahx횅r-n[7UETCَzR/7h!T.4*#,ap'DavQ2FsG +fwB_V3kAIW S&2S?7_z<OK3"!@[$ +_Ξ- {tB&OR e(l~eǾp?aE8/t +a~E͙y6O3u"g~Wʎ;m?|i$Oݯ~VliYu[ +J燍TM^Er"uZwC3DQK'$VV-A_֯x^RzHp+^`#igHwe4yq:]9B;3d?+y=gQA3嶢X]_i5#/ KBmB{7Kr):H*!q/{Zp/xi5KQMwwlWYJ~n܎KTa}0eH~2=.( +OG nao/6^֋uq47:w ׄn +]!5,F*+)9+moMߎOˆf~,DH^c|-xV3<eL_fhܢ +s+W,(~0H jd-q~QaoSXϞG$ҽ%I u1Hɛ.PF^#`v[WV/2jOδkvZ؝ztD$u6S^ +hNGIz"OCP_߻y܀fx!'2-X3tWPZ~ʾ3o|cNUx1d.26ew[8F&ss5iXaI "fܓ:W+ +o6{AJK[N;]KOZnV#Z?H|f?zj,$ G1t\xݻ&1n6@C/٭#ˣrnȊ]&ƦcdT8I>sN˟ao;6;uxj1? H`Bg(aP˃x6ϬpҡѲWN,JgzK{&jƃ'}?S:,xo]"Hzǥ3{g\NaZ:cb-rSRgsl u%w0Wk θˣE}/o.``nz z^[Ua*ώԕZ()0[R1sp1z>=h.)zYG1іHWlr*I~*~0aq/QNu<+.Do?aXWDv* wƯqDwIQ=6$;k +XW@3}e:H1'%D>2w2ַj_6Q,ͣIj4(*N* +U2ٻyyBMB( +n_[`k +iօY- Н9Ӵ +c+ +Ϻԭ6r2;M5fxi{ۭ^8n8s.L@E1m纺.ˏ}|i慺o +[[sU@t1Sr>g^gDЯk0D|ܙIZ^ +r}1͏zm# + bosu$ǸY" +_&vYI4%?+2$.{8;KO;+7 )?rfZϻY[۳~Dah}dz2&lH²a4LkS՞W:A\\G{B7-/}iE6ea\{'hady`9S֦27*ͱItTrjLRhE>6I;l=7I*zѹ_]Ju'-$h{쐌J1K +!] +Y6i]WWk2SqMn0V><\Rٲғ+uH"K%HhIO޿E+֏_cZ?99;O 7veϝ4eۗwJA+'>V0;6⏾iJ9:>SZ6iMLr pͻ]8*G]Xq1bܻ 'b +K"V9 +# oC#ɬYt%p:b@eH'Co4JViKCɋajaZAð)񀂒hYv.|H1n\q}X1jTg?P3cr&|zu2d{.gW6ʹ?),!jgX/NOXn/_SoF#R87SH3X4(Mh(ga5Mm:ң;5y/*tw U#<|XUl>X콪\=bPzfh_(:_U:#w'Ü˄ +endstream +endobj +17 0 obj << +/Type /FontDescriptor +/FontName /JZHGLF+NimbusRomNo9L-MediItal +/Flags 4 +/FontBBox [-200 -324 996 964] +/Ascent 688 +/CapHeight 688 +/Descent -209 +/ItalicAngle -15 +/StemV 120 +/XHeight 462 +/CharSet (/R/e/m/n/s/u) +/FontFile 16 0 R +>> endobj +18 0 obj << +/Length1 1630 +/Length2 16324 +/Length3 0 +/Length 17170 +/Filter /FlateDecode +>> +stream +xڬctf]&bܱm۶mޱmUlWlfŶSW|Ϗ=^5co2"E:!S8ޅ oeg r)Y`Ď\F.f +3S K:x:YYX(Ք5hhhS ?4=,_lvf.!U.fs+[3RB^ + afodd Pt52Z;Q́N&@{SJs% 08;Xu301sGE p0srvrX8ٻ `eobjO%kaWLldUQTyX4ki +4qպY;\<\el0rv5/տpu hNfFNfabӝTo`/o࿬gV.fLcmaeϬHٛL:_ +gf&ad +2]P߱LG-FB%cdg_5Lo[-RHo%o%W75s7 +cbd/:UK+H`VϠ-#AY2T;.sMaa@M_@Ly3rq_?OzFh訸ٛ)Gm-U_sofaf 4 Np7<)m8ԡQ0Ue^Jks@pӖ'ϗe0A !\#zQ76;~;$t3U[a:IZCF'/Ժs'ᡞ[\82~)gD.N&8.ehԠ${->1e\X| 3 +.ɸ_2'̨Jw.K_4sdrZ^H')fDQ\K0TgDPR` G L,K +R>PsH7gӑ{ԃ#/uy +X=^ԭ_•S? қbPjeX`Hn"䎑#OoNc BX09%S 8%} R.+ǚ}h\;NNnvpjVO^2~sM@ u!#q!vUz рTFӡcR%fg/> %\徙MN斵WAE]kDס1as +2{#5޲fԤ_#MuKI#CfI6[ih&K#CS-aJR9/P"#ZflVnQ﬎X"hzDE,x&Fb5U2S3͗_o|JT˯~=bgq6dݍ۰ﳦP*6Bf]+篆= +սm== +۫[ +^oA\MחǬ2njo,Z^oKo~M]6/C9v4?SDTLT?t4_^ Τ0Iõ$G +_j(EG@$JIQnY]^jG줓?.7o\~r +^9N|BOMS`&I6h`W8f6{QH|;?L'OD5Nl0 +я$L,1͇Ln|`Ž3ЅqL4½ݡM:31 +r*Ti/mL꼋785NIؑOE!R3z"2"86mD'vyA_;,]K֒%ېNHl!p>'6u(V@"cau8֐|AQdSA!*fUB1VCg BĮnCK:&bϑO{tYweP]h'"R3Xc̥wtYwj3 |s1\XS2sPD/MX*?>ƶ {Y=Go>nK&!t %?o 5Y!2Гa@?okk+%@o_M3I@b-IpL,n2R‰.81f$q i:vhZ]40~y +KA%( )GD RZnm^{k!>Zmx߂Lt R$2/A1k%D曣Жrˏ?.ɪyۨftCY2~7)U; @JM ~㿾0!$_bG:^%Lރm +3%AW)h *YeJgÉ]_ÞnSuFCDP*} H8 V;z2ޠ)[b'1h{LڿPd~RQ9ZATqWK[]6XO tx~>o -M藜^p=+r Kq*,ʳ@E}&6$<1\H0Aу|p=W8LEU,a +h"Ni"*P3Td +/Y*93H#>.Fc脎lE* +ba9VM0l +fBʵ. M1 6F}6K*"*$_6~aA"Gzcрź2xc&k9It돔랈Ѫxp 3/+A+#Tocn pIU7,@.O*O!3̅۷Tct7@*\ +hk_hO n+9.X4V[+9U&4aUd;M)<7}j3$dgÜ?NEecjB(8ILxأ'/;@jZO0{?5,C{{ܞ*"rBƫs%=A$!͵ju/X˺=pIh?Wn˞.͘ҔsC+I崎V9BkR=ER@3M7 +~ۺ)F+$ދzQ\kH6Fݧ>p3QXs<_#rx{e/W ~I`\acsTUsμwD!2"̒h=\HꈈzmH?`ᢣ7e͛Ah)؛~*Hdљƫ319g?mL>TOAZu1&}'-T. +JNR܂(_Q7Xtg#0Bl3`Fr#l=fAkpRnZz-%H +VˏÄ%#M1Q}wQ(J= ++c) cn#E:0i0q={˾b^ZoBc~E÷boPH a&` E(#|XK +UV,! Sl +Sk[Zv\J7 6ay(Gȁ쨍*0[˸W_D Bqt;rKc.gJȘty +`~ڽV!1v8휜au*#HnudxRv{PnK?)0F?{2ɁIPOw +m=pZe-Uq=yyePjW|=7d=m[p_b#@,9`Ԃܿ[]ZgzAl&9i|Oam`Թг#7uQ1٨zU|U_52ϼv3{40Ymc\ T?:=}QB;Hl HBKYEodrE--Q(v7:b䜍!8LW}ngg5B]{8q(5B)ۓBHH^ULv=!t?6G'z'o ~f@؀6kI # +xOCWcG-&Xe;U")LJ\ۊ-ǹR,1 #~Sm;(Ggᦁ6ϯZ +)@Q +D+D1Gj6+O~UYuspεrV=#1VL~mhj#Ԋn~l%7;7>GOႡ^8FAJ,).]Wk;3]FHHɳ~FJaGg8ָ4a4CLiD~w De`lG?rn ~|7 +?֪={A7'Wo%mz +=" vfpwLaAVSfp3b)S7LlĄO#$o "OcU`G;>p2 +)Nex QmQ}XJLܫD;FܵbLexä" ou'U9g~~>^P`Q(c' +$ 㐺:@tm`-;{wvEK%䉻\Su>V_و $B'E0cjQ=R +֭3WYp mW +%6C&Nۨ Q@6+<< sW~h論6&w؜Ut#BYmIJoLZ +6  +qAK * +Qǣds6NAz 0^mݤr-RTUt\؏(B1Wj*UVaEfd|G茠;dLd+魯r|GݛkD@5wr l?3i74)kx-%`[SĀ *v ]ԜsS<&K +͍΢Y9dX3ʺ9NKf=n.Cz=3ҌnIr 0eE*O–Ghc.gы&29 UDObPhxPA5X,WyU'c^&t`CC;'5!g)s +<-x<.&S\ˍK8=ɭn@]+pii8Epjje*x|̽u{+^ +`GSW6JIZ]ߢ1E"WC]H&/Ao\2XY{᱆'y_X +8ࡁ{S: gJ`.LުɜSu@4GP N a\G.,b~=Rr}'=`=F"}!n6:Dht#.71tVzc&$ٴZ%o}J=[a}@P]("DE:̽ T;.ৢve3<[*z!\?sWH7m`! T~qL\xϮ%@bF,mfYxؐH? +SFS27ZDvstC}Dަ[)T}LMj͍ͤ?Fd#w9qIę`yڜLf}uFZ!l' +v/Rqxѡ!Hvo ņߙ-h0,!?"kH׎qQ ^`*c$D<^ +XSiD{ΈmqgԹ/bAn,&)}Su(>%fjKeƄz6 +tD]ڇgXg PXaymŁd.t9:jn;X]p-DS?2ۭ[*Da/QKX߻L$A 9fz Ce#̲ӷn +vqݑ3(FiV9IN/PtElTv旫@1;H3x4ʰ@#K?}~1V+GU+4;&ewBcǐ? VyD + tY4:D5.c %r#6RaO kP*zTޠo$^r5?TH{gl~ȋVKh^KmrNMׂȆ' +:T\Yy;j2rmṬ2'RM"l]zH ,☾p9EғW];Yp|\c@`0z>9֟ח4hT;b + +On؞#.ulM]6/?D>͠&PTܷD¤Ӌ$q[Gj*EpR! +Npm3{ɤ~0KRmp + .&^B \Z +gl&q778Yu + rU9Q:NT| *C1ԙ߈LIm)Ǜ@@NOaQ:\ +qNeϒ]n^ 2ڏe}]8h!r=N|SŀFdx :RwMC=yldF< #ı$t~ԀLӗSYɻ`/~ UX6GNg2DTw<6O]"v([.pRM +M57د|%Ԣ{L Zp"se* +.\Ņy:ǏJ^a`:1Uj/^wSX?\[ i{%%Nt%T3[P%g>:IІeY*13 + b>Όί2SZ7\# +W $S_ @~7B1W +939@[2van Eh@pTU}P"rXIݝ%+&3]+h :X y#b{Mw_2MM_(;e±Wya5rD)ci\A t y..z*aK^[<1Y3tb<=HfVh0i-8x5WVB?6T=.G7\\~k]E,Sa屖ZŴ#/F{~9MZ=(,fMUTcQwj[M5oPS[e + -uUj={5˵|,->v\CYr{`l_( +.i/ X|' 2бEIs4ğ-4(OuuR2I~8ڒ^BJX@#&>$s?]{??{]ʗ4á}AT_KzɐKOZmD[Sd'ڤg$%dQ& +QD`e]MrG{/p6zm&;\f9}_4}GER +cP/\/;&oyo6OQbk::,kcZl aʪ)^Ce/_.(uGxi83[͙O)'.y +6u&ʩYc;r#h ;Qmm@o,iU%_=u0B)iCJ)9i6J|K sxdogAPmhxD8ɗSIu@aWQOIlW{ңW'G Ա c(4ӽ-ۅOq,fskHv|˹A ᩄє)/@\&w^Kh%ѯtb%vX(E_,AE@&%VA4~"mLtr"L=qାӳY3׫sZ='acCS2vD[Z`:mi8CƗgzTB7hI&heg Zrz\IU^a5GOa&*[{)GZxn/$BEc{)PBNnߠu1N 3m{>eF'2fi2ljKv>)uYzR֬B՜ʗ%ZLɿ02 l!-Ѳ IS +T$LcfFpe,M(֛}rӽÃZ I]}FLukUBx্5%ru\Ol,{dqg!Fd/N ):9$h1W>g/@8O's(WNBЪJԀ`F;b[h܎6 +c`q +~M||~eC#2 3K!KݽPz)IV/ \ cd҄Xɪhcdzu؋_/k2^K@ÇQpPD\"osyZ)3'\ݵAwr98hsK0>Je%hWGL ]1:BS3z5Kw%m/KjzDj/ㆃ0D0oB1%7 gK)IO_I7?va5nify_U1E෽BM.}Z]}gI v_ԶPy>+9|X}{n8o2:בN1*s\:5 LN`򔕛$+gU.M:RLxqmx`č,ðz6MVG^lb#m|v=>w,L$h]UN0 _>-avb; _'V~g INlYurwV;ɓ(rG7 F|p߃onsv%d2#w,M#k8=-Bd]L,V[tο<ZIuN?(֤z^STu@Fmlp-N5~4FO7A)"> G&.^^Ǜ (6}q5˰ĝIMABf#r$w~~2 'GiQn[;|UMaoC%p;U^"| 6>^e7k8=J 6 +#J#hT=Qd wyu);·)#6hv$ +mf"fsXd1:r4lt7M'y_5ng%)8x$akW0vr>Q4(F}k+LKA`^xm0WCOC}EW.s]ݑqL'DQG:>tIN>pٖ:'ԽnL󤓗 `0B|+=&ky|Us8&M#WfB@)J4 ]T6/^wMo +D+uYSI& ]tq$y%Ǽ2O E3"tB#mG~p]j{|XҲZ C^̾Bņf62_ۥNӧROfW$z}?gК?WNo1l=8h +SK\Y`>a(j`ZG#wwA(V+QY#,ʨ gc Gq߸6x.-T- +8JY:Ƥ[{'RѰ?J-81 {0g cF[>ah5FqSHH6#ٿUGOz~hIsŊ6$cХң63ZQ IqON/9'Au, +l.LJe \(R×bÞ1'W.Ѷ[ k?-WκGm`g!Uwz|/6iqi4~S1M%rwejGM$0DBVUBE[zi +/ɩ`?r +?wR0/{JXwDu=v%×i;!2hC +Tn/K)Y +>2gHk0H.M/4I)g8NL@bϘڣ}fE<*%!*Q'rfRZe@ܡwHաa>Hٚ[dN?LSnؒ9RS.NJ>7_*çNTfQ-(x%rgFR<].g}HM^KDgaM8 c&Kz?l[0ꢰ+]]#fJU7!A6+iX|-"Դ[d$S)EbBPPDeeRyߣXkUƜ|fl _D+A$^^&|z.JƗ +Z +FFSrTujNL} +"U)9\Y`3PZyEǜ7($0#:^qS'OmU#X8]u=.[l8ԙzo,6]YEgQ/QeipMr*sF`fiP[]jޥ@P_1  w-ExQ[I4m|OEk 8 ( ~6ҽ]H;roMe +7B/_8y4uJ~Al97vw~p3(B˃5/@gaX;9d׊*mapm"/^Z*TE,d~Em(zbysRjk)k?{DLokˣn gaV3Pa\s V2)Y7BZD= +݆X;&1bc͟\ +tbnӔ/A=:aa32&5ˊKz5H} ,$3jע8Bv,>ܳ^HAxMtyI7H"fbIqҞ?̇5/]| Ń{; *(-!ς;a}\%Gaj +9S|86ye5۫A~a_ +)͠ś%R_ ;VA`f}e֍Ye:<|"C9GJ>:7׆U(Vu:vHBNE8%5uk25Tt^5n$NV"(nI RspoQa-ܕE˯rA E5毕lܕ& N3Jr?cDW +{j-pb^Rr㒇\IiNǗȄtrIҶ,ht?]=T7q=VXLBu +S~'8~OkkZuT8/ . xyw A' S91Q ~F!ђ̙拈ۂ/V3 +3'ex4npsR^{60hi! d0>Y:V[JPhzċ/Ž %dC/̈E+« +endstream +endobj +19 0 obj << +/Type /FontDescriptor +/FontName /ZKBQVW+NimbusRomNo9L-Regu +/Flags 4 +/FontBBox [-168 -281 1000 924] +/Ascent 678 +/CapHeight 651 +/Descent -216 +/ItalicAngle 0 +/StemV 85 +/XHeight 450 +/CharSet (/A/C/D/E/F/G/H/I/J/K/L/M/N/O/P/Q/R/S/T/U/W/X/a/acute/at/b/bracketleft/bracketright/c/colon/comma/d/dotlessi/e/f/fi/g/h/hyphen/i/k/l/m/n/nine/o/one/p/period/q/quotedblleft/quotedblright/r/s/seven/t/three/tilde/two/u/v/w/x/y/zero) +/FontFile 18 0 R +>> endobj +20 0 obj << +/Length1 1647 +/Length2 9127 +/Length3 0 +/Length 9976 +/Filter /FlateDecode +>> +stream +xڭweX\ݒ5!h!Ki4xp  +!H ΐ;w}g89֮UU{ծZS]ssp!nڎª`7%c˺0#T V90Ơ::y@lla&=mfVVZlXzyt@ `{G'0Lv0[0bjhQRW0)Psn@C]kG jS+3+pu n`Op8@\]W  +{>#ٻYInWBN.;g2MGW+ҁVϭ_?0YsXu `O0c#H4mjF4Tθ?ԩ^0?ʱ?p}u(GøgCe.{dI+_Z|U6A NQ>HF\Zf(m.hh~9Rbj +0|ohk9r9kv,:(/:erYzDut!L{p +Ҥ:zO0\Ȥ/6py_ʊ_ާ T<zƪnpUN7H'0hg,ĤLKMi%QB^upj\(1&S"0k{`d< +uq_㲛nIÀ\_wU<«"/5lLe}: o #^uYEjB +qrXw*jd;=_w +qD5iI^M 9u _*U*vUI|RAfTg += rRy(XV9^ +O:`:[1n?r'.w.t[ +P&g5^:(u/0vuHP3/3әwx\>VKZIéLPӓ0(ʡ>wK CeW +>K!~KU8al늖@oJ=-ĵ1Y|rr4k#aH[#5Fq~"ӝ# „;I0VC?t _rF}ޣ(KE-FZ:tah֤G\#f0Z09P5”DAL#&DtgLl5M8#h +vBMBhl$6Ƶ}Ya2x5'b2™p{JtؒY:HϨn'm0D0IRlawݮ򚐩t.!q]齡Y } *dWJT7uZ{hcD)~<5Ͽ4cm.?9/<-zVrZ̤fnݮGRغʈ3Fߐ#BO/>.߂yг[q6w`Wy҆t[~ox'_NoB_*'4m51\z!EO0\qvOŻWyB;dp]:E +\do*NVpE}# I2̸Nq,R,vX%NED==lFmrCȳ?tC# k1UUl_ +/QZ:*b}(4&a#M/UJjyep*^y(+Z-3D lAb]OgVQ{{#!pZwF2iBv8E^dl!'WXh4bJoM˶ߜLK|2O2']Mɸ<|)~Yox?=dIFs00E~D$/ZXvesɘv ԃg_`~,@SP~I4Df?vqkZgi}UWЩH)@N]l!LrN}{ 3J2As!i1V"l# ugY"(bv_87J +nhcf}},݈fN6QUefi!;̑ W#/ð2-|HE\3gB[<+7 ցͭޠB/Y +r$.Na\D|9O: ]%¦||dճ20bh +]M7RXaGTun>P?e.;U1XMP! /j'GNj~pU1OQoZ +b:d/5g5,o̕EHR r'BxÏ +(g_HF;6&] a(7-dBwviFqxsS*k$ ~hO Ϲpv?nsBhb +]tQU(mǙZN5Tzv +X[I'YB\vw ++/=|ךJC3)Ώn]DliʮcG|k2n_GaeNR/,8pMRO:v=FRVT*17.~P; pH5j䱹C31ljU*O'$ Dͺ`Ufcz2>_W u_Rwp,;^v6.tIIy|YJ*7? _+Y: Φ 'FfnW&u…( l`)E0Jȃ:y +nNϞ{;Q!񛨁?\/pң}ħ!ǎK1m +eEGbJu}9&ǿ%L!CnbG4zVЄl+⋄HrY$F2p.}LΧk>-~cSTW wOnEdUk&`VΜx9Ɣg\Jqz<5ԍ4f=gbM}9^tqљgͼ>],[@qI4'qe/4u CT]Iݓm3z#9 6r)L=CCB i$(ɯ2XfD6C?&/pG`?̍;7j^xX}+o8iO˫F=*x$KBj +oCß2 #cLϽ|T|/1vj\?+oT5YM\4 g1{O8b#5J~ +}Vm +!s 9qkU5O~ZW-:Y %쟛C)[X:Zamrh"-Ialɇ='>&V-dqu̾S#l\}|Tz 61rJoo}{ǿ<5τ3!},~*=ln,^̀(nG- ]Ax|i|!|8BSgCtQl2m|LN.hqbǸphnrik:|ڀ]8=*z=Cctg`ףbgP'h//-Ё|q.zʝT9cȓ.ɿ<[nv.Wa8Q}jOBjvuy"χ;݊)C^N՞O@`d@[L՝|nV5E7Hb?Z՘&> i5jK:2$1u\`UUAqjG"t뼇O8͋T샿RZj7pQ,B둧,{}"(rg2KB,C>UDɕ;'͟r^K█m(RP(|PYv3R|+d'w%'} K.ۋoeT{g){Ip~˩ԓM!8`v2AߦV;i$a&_Ls^#{4dNdm$P9gi1 sf +A!+5X +"j}{ѷჅX +o=351<7%b%W^Xbוk[>T%VzaG`7DhgNFVe~e߉Ox +#@T6\կFRظɊEjTs5vnk,jgt/h WE9^LqNz;;l\u0,lIVO+TQ MкC:!TmH +0υR&1:'jZJE.ysWacN6Q %{ +"xt.?/{bMMux)XNP9v+}+]:b*ΉIpÜdfO;'W_HlϱEd9|'m,*#tCegM'B#x_$;ڥa1CPOaeؘr6xϣWz\VK6*OL]~pdPh]bKE+1|d;#oG{0Xs4hZ8b2F7:՞g #p[~ J!{-|ĄuA!E[t841J0VdӴ:o[$[A+0EJ8zۘ>"OZok"kC)(sW3F|TBJOfєr6f +.\GD)mt6&+Aw>c^,lSkQ8o&),\#id9_NfH\Z_%mHq[U[LV&FʬQ7aN唸'?S@o=IZ8Jn<^A앻>4dV&OLhlKy≗@,^eD^&!k_m;we;8iA^K|oxTd4VI +e,P+5Ma6Mo)3.@u^( +77kAEclw\Іe*GJ&^șwZV^×z*vF@ ]^2Qi¸0w`  +& Cqܕ2 wY,vn"k<7lzEka%,F(u\S_T0oU4)O3VپRJI<ʍpG'gg_"Jk܈yDMIc7M,ژW,t]"э\FՂY>F{(D2a>nScQB+Wֆjf^~URk˟t4h4qJp<鴵A3pe_4Z#Eb?ܹec*[)Ўex)#\U"W6N6nKo Dy00ce!k fgX浛=>xT0.@h ~.5stf;]ČǼ +B `lBJ(tzmz$ +kQvo Y*MsPL mT4 b$/i8ST"ۈewHR2j3_hՕ;ft_hBrtmkĈItuC[%W]!3w "xFtrEM +-HY|6SG\L]j_NnJvh#2 }vns6bk:pwlUtc׬4rfaΘc[n.dEK7YmHڰ+._9M@bk D}7 +moB9\bQ} +fe k~q-u +:4nN`#A:π5T!LAOPpgܙ\64+Kz}+̕LoY-VͮϦp]j#G^"Һ4 +$xX/{N7l';9^ӥ"j]7OPusF4%A7`2߶k[mn1U;L2^y Z;E\ZY.6m}郏j ֧v釗8HǨ<jl|~&(3Ir&Lnh=(tvX +׈}̌B% +n$jw|\*xa3e|g?am"_BHޚ'@TࢹBOo [rNy+s۳c(L\ܼ(ѺRjiQXW0FVC_S8Njb] 'E}Y{7D-n8bR\ yz|'XpqK\0c b^=‡GS#ղmЖ 7}_&o#z"lf"כ"+yX:%Q +Z}szjd)&9i|{Wd_"d_x 6VTv24Jp+]Z]o^BŽ%[=V:-L+u#bB{-~n4}| +2~5J"e]4Jy5Eh=Ti a:ZRfY_z$t—4Y2t*+'Y SOOt8T J￱O{'jk'`lïdo%97yk_mcmL\4.B,KTKX4&rj:pEdbHo@:04JE+Oc}YQu]p[뺽GCVQzuݮ +{uNJs/]ΧOkF54bk +_΍8-nݦژJRΖPJ7%hMl^I_4q|iLR9ЍJ{y>];7HjLQ?~ZlXu s6rҶ8-cڸ^Ad '>`'n=~.1}vش|Ҿc;hQFteAt1.0YGd\BOIucG\g݁fێc_oB[,e?]/86Ƨ |RjS\&ϊ@:$CΝ3 dȂdb!+B}>Yg{.D&QdXB3}> RQ7nXR5KjIvqGYK [-SBkmpĈ=0=En］ +endstream +endobj +21 0 obj << +/Type /FontDescriptor +/FontName /HNRLSX+NimbusRomNo9L-ReguItal +/Flags 4 +/FontBBox [-169 -270 1010 924] +/Ascent 669 +/CapHeight 669 +/Descent -193 +/ItalicAngle -15 +/StemV 78 +/XHeight 441 +/CharSet (/A/E/G/H/I/L/S/T/X/a/b/c/colon/d/e/g/hyphen/i/n/o/one/period/r/s/t/u) +/FontFile 20 0 R +>> endobj +9 0 obj << +/Type /Encoding +/Differences [2/fi 17/dotlessi 44/comma/hyphen/period 48/zero/one/two/three 55/seven 57/nine/colon 64/at/A 67/C/D/E/F/G/H/I/J/K/L/M/N/O/P/Q/R/S/T/U 87/W/X 91/bracketleft 93/bracketright 97/a/b/c/d/e/f/g/h/i 107/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y 147/quotedblleft/quotedblright 151/emdash/tilde 180/acute] +>> endobj +6 0 obj << +/Type /Font +/Subtype /Type1 +/BaseFont /RLJTZE+NimbusRomNo9L-Medi +/FontDescriptor 15 0 R +/FirstChar 17 +/LastChar 180 +/Widths 11 0 R +/Encoding 9 0 R +>> endobj +5 0 obj << +/Type /Font +/Subtype /Type1 +/BaseFont /JZHGLF+NimbusRomNo9L-MediItal +/FontDescriptor 17 0 R +/FirstChar 82 +/LastChar 117 +/Widths 12 0 R +/Encoding 9 0 R +>> endobj +4 0 obj << +/Type /Font +/Subtype /Type1 +/BaseFont /ZKBQVW+NimbusRomNo9L-Regu +/FontDescriptor 19 0 R +/FirstChar 2 +/LastChar 180 +/Widths 13 0 R +/Encoding 9 0 R +>> endobj +7 0 obj << +/Type /Font +/Subtype /Type1 +/BaseFont /HNRLSX+NimbusRomNo9L-ReguItal +/FontDescriptor 21 0 R +/FirstChar 45 +/LastChar 117 +/Widths 10 0 R +/Encoding 9 0 R +>> endobj +8 0 obj << +/Type /Pages +/Count 1 +/Kids [2 0 R] +>> endobj +22 0 obj << +/Type /Catalog +/Pages 8 0 R +>> endobj +23 0 obj << +/Producer (pdfTeX-1.40.10) +/Creator (TeX) +/CreationDate (D:20140312185539-03'00') +/ModDate (D:20140312185539-03'00') +/Trapped /False +/PTEX.Fullbanner (This is pdfTeX, Version 3.1415926-1.40.10-2.2 (TeX Live 2009/Debian) kpathsea version 5.0.0) +>> endobj +xref +0 24 +0000000000 65535 f +0000001666 00000 n +0000001555 00000 n +0000000015 00000 n +0000047025 00000 n +0000046853 00000 n +0000046685 00000 n +0000047192 00000 n +0000047364 00000 n +0000046348 00000 n +0000001767 00000 n +0000002077 00000 n +0000002710 00000 n +0000002872 00000 n +0000003557 00000 n +0000011318 00000 n +0000011592 00000 n +0000017957 00000 n +0000018204 00000 n +0000035494 00000 n +0000035950 00000 n +0000046045 00000 n +0000047421 00000 n +0000047471 00000 n +trailer +<< /Size 24 +/Root 22 0 R +/Info 23 0 R +/ID [<995FEF47C8F59AFAEBF08FB0FDCDE92E> <995FEF47C8F59AFAEBF08FB0FDCDE92E>] >> +startxref +47737 +%%EOF Index: PHR/2014-03-12/bare_jrnl.pdf =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: PHR/2014-03-12/bare_jrnl.pdf =================================================================== --- PHR/2014-03-12/bare_jrnl.pdf (nonexistent) +++ PHR/2014-03-12/bare_jrnl.pdf (revision 153)
PHR/2014-03-12/bare_jrnl.pdf Property changes : Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property Index: PHR/2014-03-12/VI-EIEC-Template.tex =================================================================== --- PHR/2014-03-12/VI-EIEC-Template.tex (nonexistent) +++ PHR/2014-03-12/VI-EIEC-Template.tex (revision 153) @@ -0,0 +1,563 @@ +%% This is a skeleton file demonstrating the use of IEEEtran.cls to generate +%% the final manuscript for "VI Iberian Meeting on Computational Electromagnetics". +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE journal paper. +%% + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + +% *** CITATION PACKAGES *** +% +%\usepackage{cite} +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + +% *** SPECIALIZED LIST PACKAGES *** +% +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + +% *** SUBFIGURE PACKAGES *** +%\usepackage[tight,footnotesize]{subfigure} +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + +%\usepackage[caption=false]{caption} +%\usepackage[font=footnotesize]{subfig} +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\usepackage[caption=false,font=footnotesize]{subfig} +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +\documentclass[journal,a4paper]{IEEEtran} +% +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[journal]{../sty/IEEEtran} + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{This is a Sample Tex File to Illustrate the Use of IEEEtran.cls for VI EIEC} +% +% +% Author names +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% + +\author{Bruce~Springsteen, Eric~Clapton, and~John~Mayall + +\thanks{ +% Please, write here acknowledgment for financial support if desired. +This work was supported in part by the Spanish Council of Research under Grant BS123456 (sponsor and financial support acknowledgment goes here). Paper titles should be written in uppercase and lowercase letters, not all uppercase. Avoid writing long formulas with subscripts in the title; short formulas that identify the elements are fine (e.g., "Nd-Fe-B"). Full names of authors are preferred in the author field. } +\thanks{B. Springsteen is with the Department of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space +\thanks{E. Clapton and J. Mayall are with Anonymous University.}% <-this % stops a space +} + + +% The paper headers +\markboth{VI Iberian Meeting on Computational Electromagnetics, Chiclana (Spain), 22-24 October 2008}% +{Shell \MakeLowercase{\textit{et al.}}: The Title of your Paper} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% + +% make the title area +\maketitle + +% The Abstract +\begin{abstract} +The abstract goes here. +\end{abstract} + +% The Keywords +\begin{IEEEkeywords} +Chiclana, large beaches, good fish, nice weather. +\end{IEEEkeywords} + +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps. +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for ``VI Iberian Meeting on Computational Electromagnetics'' papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. I wish you the best of success. + + +\section{The organization of the paper} +The paper should be structured in sections, subsections and, if required, subsubsections. + +Concerning Figures and Tables, the usual style of IEEE journals is adopted here. Please, avoid to include too many lettering inside the figure and let most of this information for the captions. If lettering is included, please be sure that this is legible. + +Mathematical expressions generated by using any \LaTeX command set are suitable for our purposes. \\ + +PLEASE, send the following material with your final submission: + +\begin{enumerate} +\item \LaTeX source files. +\item A zip or rar file with figures in eps or pdf format. +\item A pdf file with the final formatting desired by the authors (final formatting will be done by the organization to ensure homogeneity). +\end{enumerate} + +All this material should be emailed to \underline{medina@us.es} before 10th of July 2008. + + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Summarizing Maxwell Equations} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\section*{Acknowledgment} + + +The authors would like to thank... + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section + +\begin{IEEEbiographynophoto}{Bruce Springsteen} +Bruce Frederick Joseph Springsteen (born September 23, 1949) is an American songwriter, singer and guitarist. He has recorded and toured with the E Street Band. Springsteen is widely known for his brand of heartland rock infused with pop hooks, poetic lyrics, and Americana sentiments centered around his native New Jersey. His eloquence in expressing ordinary, everyday problems has earned him numerous awards, including eighteen Grammy Awards and an Academy Award, along with a notoriously dedicated and devoted global fan base. His most famous albums, Born to Run and Born in the U.S.A., epitomize his penchant for finding grandeur in the struggles of daily life. He has sold over 65 million albums in the U.S. + +Springsteen's lyrics often concern men and women struggling to make ends meet. He has gradually become identified with progressive politics. Springsteen is also noted for his support of various relief and rebuilding efforts in New Jersey and elsewhere, and for his response to the September 11, 2001 attacks, on which his album The Rising reflects. +\end{IEEEbiographynophoto} + +\begin{IEEEbiographynophoto}{Eric Clapton} +Eric Patrick Clapton (born 30 March 1945), nicknamed Slowhand, is a 19 time Grammy Award-winning English rock guitarist, singer, songwriter and composer. He is one of the most successful musicians of the 20th and 21st centuries, garnering an unprecedented three inductions into the Rock and Roll Hall of Fame (The Yardbirds, Cream, and solo). Often viewed by critics and fans alike as one of the greatest guitarists of all time, Clapton was ranked fourth in Rolling Stone Magazine's list of the ``100 Greatest Guitarists of All Time'' and \# 53 on their list of the Immortals: 100 Greatest Artists of All Time. + +Although Clapton's musical style has varied throughout his career, it has always remained rooted in the blues. Clapton is credited as an innovator in several phases of his career, which have included blues-rock (with John Mayall \& the Bluesbreakers and The Yardbirds) and psychedelic rock (with Cream). Clapton has also achieved great chart success in genres ranging from Delta blues (Me and Mr. Johnson) to pop (``Change the World'') and reggae (Bob Marley's ``I Shot the Sheriff''). Clapton also achieved fame with Derek and the Dominos through the hit song ``Layla''. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{John Mayall} +John Mayall, OBE (born 29 November 1933) is a pioneering English blues singer, songwriter, and multi-instrumentalist. His musical career spans over fifty years but the most notable episode in it occurred during the late `60s. He was the founder of John Mayall \& the Bluesbreakers and has been influential in the careers of many instrumentalists, including Eric Clapton, Jack Bruce, Peter Green, John McVie, Mick Fleetwood, Mick Taylor, Don ``Sugarcane'' Harris, Harvey Mandel, Larry Taylor, Aynsley Dunbar, Jon Hiseman, Dick Heckstall-Smith, Andy Fraser, Johnny Almond, Jon Mark, Walter Trout and Coco Montoya. +\end{IEEEbiographynophoto} + +% that's all folks +\end{document} + +
PHR/2014-03-12/VI-EIEC-Template.tex Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Rev URL \ No newline at end of property Index: PHR/2014-03-12/bare_jrnl_compsoc.pdf =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: PHR/2014-03-12/bare_jrnl_compsoc.pdf =================================================================== --- PHR/2014-03-12/bare_jrnl_compsoc.pdf (nonexistent) +++ PHR/2014-03-12/bare_jrnl_compsoc.pdf (revision 153)
PHR/2014-03-12/bare_jrnl_compsoc.pdf Property changes : Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property Index: PHR/2014-03-12/bare_adv.pdf =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: PHR/2014-03-12/bare_adv.pdf =================================================================== --- PHR/2014-03-12/bare_adv.pdf (nonexistent) +++ PHR/2014-03-12/bare_adv.pdf (revision 153)
PHR/2014-03-12/bare_adv.pdf Property changes : Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property Index: PHR/2014-03-12/bare_conf.tex =================================================================== --- PHR/2014-03-12/bare_conf.tex (nonexistent) +++ PHR/2014-03-12/bare_conf.tex (revision 153) @@ -0,0 +1,605 @@ + +%% bare_conf.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE conference paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[conference,a4paper]{IEEEtran} +% Add the compsoc option for Computer Society conferences. +% +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[conference]{../sty/IEEEtran} + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +%\usepackage{cite} +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. + + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +% +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\usepackage[tight,footnotesize]{subfigure} +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + + +%\usepackage[caption=false]{caption} +%\usepackage[font=footnotesize]{subfig} +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\usepackage[caption=false,font=footnotesize]{subfig} +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + +% --------------- USEPACKAGE agregados por guanucoluis ---------------- + +\usepackage[utf8]{inputenc} +\usepackage[spanish]{babel} + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Plataforma de Hardware Reconfigurable para el Diseño de Sistemas Digitales} + + +% author names and affiliations +% use a multiple column layout for up to three different +% affiliations +\author{\IEEEauthorblockN{Alexis Maximiliano Quiteros} +\IEEEauthorblockA{Ingeniería Electrónica\\ +Universidad Tecnológica Nacional\\ +Facultad Regional Córdoba\\ +Email: maximiliano.quinteros@gmail.com} +\and +\IEEEauthorblockN{Luis Alberto Guanuco} +\IEEEauthorblockA{Departamento de Ingeniería Electrónica\\ +Universidad Tecnológica Nacional\\ +Facultad Regional Córdoba\\ +Email: lguanuco@electronica.frc.utn.edu.ar} +\and +\IEEEauthorblockN{Sergio Daniel Olmedo} +\IEEEauthorblockA{CUDAR\\%Centro Universitario de Desarrollo en Automoción y Robótica\\ +Universidad Tecnológica Nacional\\ +Facultad Regional Córdoba\\ +Email: solmedo@scdt.frc.utn.edu.ar}} + + +% conference papers do not typically use \thanks and this command +% is locked out in conference mode. If really needed, such as for +% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts +% after \documentclass + +% for over three affiliations, or if they all won't fit within the width +% of the page, use this alternative format: +% +%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1}, +%Homer Simpson\IEEEauthorrefmark{2}, +%James Kirk\IEEEauthorrefmark{3}, +%Montgomery Scott\IEEEauthorrefmark{3} and +%Eldon Tyrell\IEEEauthorrefmark{4}} +%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\ +%Georgia Institute of Technology, +%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html} +%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\ +%Email: homer@thesimpsons.com} +%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\ +%Telephone: (800) 555--1212, Fax: (888) 555--1212} +%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}} + + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + + +% make the title area +\maketitle + + +\begin{abstract} +%\boldmath + +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the conference you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals/conferences frown on +% math in the abstract anyway. + +% no keywords + + + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% no \IEEEPARstart +This demo file is intended to serve as a ``starter file'' +for IEEE conference papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals/conferences use top floats +% exclusively. Note that, LaTeX2e, unlike IEEE journals/conferences, places +% footnotes above bottom floats. This can be corrected via the \fnbelowfloat +% command of the stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + +% conference papers do not normally have an appendix + + +% use section* for acknowledgement +\section*{Acknowledgment} + + +The authors would like to thank... + + + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + + + + +% that's all folks +\end{document} + +
PHR/2014-03-12/bare_conf.tex Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Rev URL \ No newline at end of property Index: PHR/2014-03-12/bare_jrnl.tex =================================================================== --- PHR/2014-03-12/bare_jrnl.tex (nonexistent) +++ PHR/2014-03-12/bare_jrnl.tex (revision 153) @@ -0,0 +1,745 @@ + +%% bare_jrnl.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% see http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE journal paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + + + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[journal]{IEEEtran} +% +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[journal]{../sty/IEEEtran} + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +%\usepackage{cite} +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. + + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +% +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\usepackage[tight,footnotesize]{subfigure} +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + + +%\usepackage[caption=false]{caption} +%\usepackage[font=footnotesize]{subfig} +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\usepackage[caption=false,font=footnotesize]{subfig} +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Demo of IEEEtran.cls for Journals} +% +% +% author names and IEEE memberships +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% + +\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} + John~Doe,~\IEEEmembership{Fellow,~OSA,} + and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space +\thanks{M. Shell is with the Department +of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space +\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space +\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}} + +% note the % following the last \IEEEmembership and also \thanks - +% these prevent an unwanted space from occurring between the last author name +% and the end of the author line. i.e., if you had this: +% +% \author{....lastname \thanks{...} \thanks{...} } +% ^------------^------------^----Do not want these spaces! +% +% a space would be appended to the last name and could cause every name on that +% line to be shifted left slightly. This is one of those "LaTeX things". For +% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get +% "AB" then you have to do: "\textbf{A}\textbf{B}" +% \thanks is no different in this regard, so shield the last } of each \thanks +% that ends a line with a % and do not let a space in before the next \thanks. +% Spaces after \IEEEmembership other than the last one are OK (and needed) as +% you are supposed to have spaces between the names. For what it is worth, +% this is a minor point as most people would not even notice if the said evil +% space somehow managed to creep in. + + + +% The paper headers +\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Journals} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% +% *** Note that you probably will NOT want to include the author's *** +% *** name in the headers of peer review papers. *** +% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if +% you desire. + + + + +% If you want to put a publisher's ID mark on the page you can do it like +% this: +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE} +% Remember, if you use this you must call \IEEEpubidadjcol in the second +% column for its text to clear the IEEEpubid mark. + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + + +% make the title area +\maketitle + + +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the journal you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals frown on math +% in the abstract anyway. + +% Note that keywords are not normally used for peerreview papers. +\begin{IEEEkeywords} +IEEEtran, journal, \LaTeX, paper, template. +\end{IEEEkeywords} + + + + + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps. +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for IEEE journal papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Proof of the First Zonklar Equation} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\section*{Acknowledgment} + + +The authors would like to thank... + + +% Can use something like this to put references on a page +% by themselves when using endfloat and the captionsoff option. +\ifCLASSOPTIONcaptionsoff + \newpage +\fi + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section +% +% If you have an EPS/PDF photo (graphicx package needed) extra braces are +% needed around the contents of the optional argument to biography to prevent +% the LaTeX parser from getting confused when it sees the complicated +% \includegraphics command within an optional argument. (You could create +% your own custom macro containing the \includegraphics command to make things +% simpler here.) +%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell} +% or if you just want to reserve a space for a photo: + +\begin{IEEEbiography}{Michael Shell} +Biography text here. +\end{IEEEbiography} + +% if you will not have a photo at all: +\begin{IEEEbiographynophoto}{John Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{Jane Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% You can push biographies down or up by placing +% a \vfill before or after them. The appropriate +% use of \vfill depends on what kind of text is +% on the last page and whether or not the columns +% are being equalized. + +%\vfill + +% Can be used to pull up biographies so that the bottom of the last one +% is flush with the other column. +%\enlargethispage{-5in} + + + +% that's all folks +\end{document} + +
PHR/2014-03-12/bare_jrnl.tex Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Rev URL \ No newline at end of property

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.