URL
https://opencores.org/ocsvn/present/present/trunk
Subversion Repositories present
Compare Revisions
- This comparison shows the changes necessary to convert path
/present/trunk/Pure/syn
- from Rev 4 to Rev 8
- ↔ Reverse comparison
Rev 4 → Rev 8
/XC3ES500/PresentEnc.prj
0,0 → 1,9
vhdl work "../../rtl/vhdl/slayer.vhd" |
vhdl work "../../rtl/vhdl/kody.vhd" |
vhdl work "../../rtl/vhdl/Reg.vhd" |
vhdl work "../../rtl/vhdl/PresentStateMachine.vhd" |
vhdl work "../../rtl/vhdl/pLayer.vhd" |
vhdl work "../../rtl/vhdl/keyupd.vhd" |
vhdl work "../../rtl/vhdl/counter.vhd" |
vhdl work "../../rtl/vhdl/AsyncMux.vhd" |
vhdl work "../../rtl/vhdl/PresentEnc.vhd" |
XC3ES500/log
Property changes :
Added: bugtraq:number
## -0,0 +1 ##
+true
\ No newline at end of property
Index: XC3ES500/PresentEnc.xst
===================================================================
--- XC3ES500/PresentEnc.xst (nonexistent)
+++ XC3ES500/PresentEnc.xst (revision 8)
@@ -0,0 +1,56 @@
+set -tmpdir "xst/projnav.tmp"
+set -xsthdpdir "xst"
+run
+-ifn PresentEnc.prj
+-ifmt mixed
+-ofn PresentEnc
+-ofmt NGC
+-p xc3s500e-5-fg320
+-top PresentEnc
+-opt_mode Speed
+-opt_level 1
+-iuc NO
+-keep_hierarchy Soft
+-netlist_hierarchy As_Optimized
+-rtlview Yes
+-glob_opt AllClockNets
+-read_cores YES
+-write_timing_constraints NO
+-cross_clock_analysis NO
+-hierarchy_separator /
+-bus_delimiter <>
+-case Maintain
+-slice_utilization_ratio 100
+-bram_utilization_ratio 100
+-verilog2001 YES
+-fsm_extract YES -fsm_encoding Auto
+-safe_implementation No
+-fsm_style LUT
+-ram_extract Yes
+-ram_style Auto
+-rom_extract Yes
+-mux_style Auto
+-decoder_extract YES
+-priority_extract Yes
+-shreg_extract YES
+-shift_extract YES
+-xor_collapse YES
+-rom_style Auto
+-auto_bram_packing NO
+-mux_extract Yes
+-resource_sharing YES
+-async_to_sync NO
+-mult_style Auto
+-iobuf YES
+-max_fanout 100000
+-bufg 24
+-register_duplication YES
+-register_balancing No
+-slice_packing YES
+-optimize_primitives NO
+-use_clock_enable Yes
+-use_sync_set Yes
+-use_sync_reset Yes
+-iob Auto
+-equivalent_register_removal YES
+-slice_utilization_ratio_maxmargin 5
Index: XC3ES500/out
===================================================================
--- XC3ES500/out (nonexistent)
+++ XC3ES500/out (revision 8)
XC3ES500/out
Property changes :
Added: bugtraq:number
## -0,0 +1 ##
+true
\ No newline at end of property
Index: XC3ES500/PresentEnc.ut
===================================================================
--- XC3ES500/PresentEnc.ut (nonexistent)
+++ XC3ES500/PresentEnc.ut (revision 8)
@@ -0,0 +1,22 @@
+-w
+-g DebugBitstream:No
+-g Binary:no
+-g CRC:Enable
+-g ConfigRate:1
+-g ProgPin:PullUp
+-g DonePin:PullUp
+-g TckPin:PullUp
+-g TdiPin:PullUp
+-g TdoPin:PullUp
+-g TmsPin:PullUp
+-g UnusedPin:PullDown
+-g UserID:0xFFFFFFFF
+-g DCMShutdown:Disable
+-g StartUpClk:CClk
+-g DONE_cycle:4
+-g GTS_cycle:5
+-g GWE_cycle:6
+-g LCK_cycle:NoWait
+-g Security:None
+-g DonePipe:Yes
+-g DriveDone:No
Index: XC3ES500/Makefile
===================================================================
--- XC3ES500/Makefile (nonexistent)
+++ XC3ES500/Makefile (revision 8)
@@ -0,0 +1,51 @@
+PROJECT=present-pure
+
+RM=rm -rf
+
+PLATFORM=xc3s500e-fg320-5
+
+XILINX_DIR="D:/Programy/Xilinx/14.2/ISE_DS/ISE/bin/nt64/"
+XST_DIR=$(XILINX_DIR)"xst.exe"
+NGDBUILD_DIR=$(XILINX_DIR)"ngdbuild.exe"
+MAP=$(XILINX_DIR)"map.exe"
+PAR=$(XILINX_DIR)"par.exe"
+TRCE=$(XILINX_DIR)"trce.exe"
+BITGEN=$(XILINX_DIR)"bitgen.exe"
+
+clean: clean_postgen
+ $(RM) "./out/"*.*
+ $(RM) "./log/"*.*
+
+clean_postgen:
+ $(RM) "./_xmsgs"
+ $(RM) "./_ngo"
+ $(RM) "./xlnx_auto_0_xdb"
+ $(RM) "./xst"
+ $(RM) *_vhdl.prj *.bgn *.bld *.csv *.drc *.lso *.map *.mrp *.ncd *.ngc *.ngd *.ngm *.ngr *.pad *.par *.pcf *.ptwx *.syr *.twr *.twx *.unroutes *.xpi *.xwbt
+
+synthesize: clean
+ mkdir "./xst"
+ mkdir "./xst/projnav.tmp"
+ $(XST_DIR) -intstyle ise -ifn "./PresentEnc.xst" -ofn "./PresentEnc.syr"
+
+translate: synthesize
+ $(NGDBUILD_DIR) -intstyle ise -dd _ngo -nt timestamp -i -p $(PLATFORM) "PresentEnc.ngc" PresentEnc.ngd
+
+map: translate
+ $(MAP) -intstyle ise -p $(PLATFORM) -cm area -ir off -pr off -c 100 -o PresentEnc_map.ncd PresentEnc.ngd PresentEnc.pcf
+
+par: map
+ $(PAR) -w -intstyle ise -ol high -t 1 PresentEnc_map.ncd PresentEnc.ncd PresentEnc.pcf
+
+trce: par
+ $(TRCE) -intstyle ise -v 3 -s 5 -n 3 -fastpaths -xml PresentEnc.twx PresentEnc.ncd -o PresentEnc.twr PresentEnc.pcf
+
+bitgen: par
+ $(BITGEN) -intstyle ise -f PresentEnc.ut PresentEnc.ncd
+
+postgen:
+ mv *.bit ./out
+ mv *.xrpt ./log
+ mv *.txt ./log
+ mv *.xml ./log
+ mv *.html ./log
\ No newline at end of file