OpenCores
URL https://opencores.org/ocsvn/pss/pss/trunk

Subversion Repositories pss

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /pss
    from Rev 6 to Rev 7
    ↔ Reverse comparison
  •

Rev 6 → Rev 7

/trunk/pss/hdl/pss/zpu_uc/zpu_core/zpu_core_stub.v
28,7 → 28,7
assign out_mem_addr = 32'hx;
assign mem_writeMask = 4'h0;
 
assign interrupt_ack = 1'b0;
assign interrupt_ack = interrupt;
assign break_o = 1'b0;
assign zpu_status = 64'h0;
 
/trunk/pss/hdl/pss/zpu_uc/motherblock/pss_busbridge.v
107,7 → 107,7
begin
xport_req_o <= 1'b1;
xport_we_o <= 1'b1;
xport_addr_bo <= bus_addr_bi;
xport_addr_bo <= {a31_i, bus_addr_bi[30:0]};
xport_wdata_bo <= bus_wdata_bi;
xport_writemask_bo <= bus_writemask_bi;
bb_state <= ST_WR_WAIT_ACK;
116,7 → 116,7
begin
xport_req_o <= 1'b1;
xport_we_o <= 1'b0;
xport_addr_bo <= bus_addr_bi;
xport_addr_bo <= {a31_i, bus_addr_bi[30:0]};
xport_wdata_bo <= bus_wdata_bi;
xport_writemask_bo <= bus_writemask_bi;
bb_state <= ST_RD_WAIT_ACK;
/trunk/pss/hdl/pss/zpu_uc/motherblock/pss_motherblock.v
38,6 → 38,7
#(
parameter A31_DEFAULT = 1,
parameter CPU_RESET_DEFAULT = 1,
parameter EXT_RESET_DEFAULT = 1,
parameter MEM_SIZE_KB = 1
)
(
269,6 → 270,7
PSS_SFR
#(
.CPU_RESET_DEFAULT(CPU_RESET_DEFAULT),
.EXT_RESET_DEFAULT(EXT_RESET_DEFAULT),
.A31_DEFAULT(A31_DEFAULT),
.MEM_SIZE_KB(MEM_SIZE_KB)
)
293,6 → 295,7
.trap_cpu_addr_bi(cpu_addr_bi),
 
.cpu_reset_o(cpu_reset_o),
.ext_reset_o(ext_rst_o),
.a31_o(a31),
 
.bus_error_i(bus_error),
/trunk/pss/hdl/pss/zpu_uc/motherblock/pss_sfr.v
1,6 → 1,7
module PSS_SFR
#(
parameter CPU_RESET_DEFAULT = 1,
parameter EXT_RESET_DEFAULT = 1,
parameter A31_DEFAULT = 1,
parameter MEM_SIZE_KB = 1
)
25,6 → 26,7
input [31:0] trap_cpu_addr_bi,
 
output reg cpu_reset_o,
output reg ext_reset_o,
output cpu_enb_o,
output reg a31_o,
 
105,6 → 107,7
begin
 
cpu_reset_o <= CPU_RESET_DEFAULT;
ext_reset_o <= EXT_RESET_DEFAULT;
a31_o <= A31_DEFAULT;
 
trap_enable <= 1'b0;
141,7 → 144,7
begin
if (bus_we_i == 1'b0)
case (bus_addr_bi[7:0])
REG_CPU_CONTROL_ADDR: bus_rdata_bo <= {cpu_present_i, 29'h0, cpu_break_i, cpu_reset_o};
REG_CPU_CONTROL_ADDR: bus_rdata_bo <= {cpu_present_i, 28'h0, cpu_break_i, ext_reset_o, cpu_reset_o};
REG_CPU_PC_ADDR: bus_rdata_bo <= cpu_pc_bi;
REG_A31: bus_rdata_bo <= {31'h0, a31_o};
 
162,7 → 165,7
endcase
else
case (bus_addr_bi[7:0])
REG_CPU_CONTROL_ADDR: cpu_reset_o <= bus_wdata_bi[0];
REG_CPU_CONTROL_ADDR: begin cpu_reset_o <= bus_wdata_bi[0]; ext_reset_o <= bus_wdata_bi[1]; end
REG_A31: a31_o <= bus_wdata_bi[0];
 
REG_INTC_CONTROL_ADDR: begin intc_ie_we_o <= 1'b1; intc_ie_data_o <= bus_wdata_bi[0]; end
/trunk/pss/hdl/pss/zpu_uc/zpu_uc.v
38,6 → 38,7
#(
parameter CPU_PRESENT = 1,
parameter CPU_RESET_DEFAULT = 1,
parameter EXT_RESET_DEFAULT = 1,
parameter A31_DEFAULT = 1,
parameter MEM_DATA = "data.bin",
parameter MEM_SIZE_KB = 1
166,6 → 167,7
#(
.A31_DEFAULT(A31_DEFAULT),
.CPU_RESET_DEFAULT(CPU_RESET_DEFAULT),
.EXT_RESET_DEFAULT(EXT_RESET_DEFAULT),
.MEM_SIZE_KB(MEM_SIZE_KB)
)
MotherBlock
/trunk/pss/hdl/pss/pss.v
38,6 → 38,7
#(
parameter CPU_PRESENT = 1,
parameter CPU_RESET_DEFAULT = 1,
parameter EXT_RESET_DEFAULT = 1,
parameter A31_DEFAULT = 1,
parameter MEM_SIZE_KB = 1,
parameter MEM_DATA = ""
95,6 → 96,7
#(
.CPU_PRESENT(CPU_PRESENT),
.CPU_RESET_DEFAULT(CPU_RESET_DEFAULT),
.EXT_RESET_DEFAULT(EXT_RESET_DEFAULT),
.A31_DEFAULT(A31_DEFAULT),
.MEM_DATA(MEM_DATA),
.MEM_SIZE_KB(MEM_SIZE_KB)
/trunk/pss/SW/terminal/pss.tcl
299,6 → 299,6
}
 
 
#pss_cc com4 115200
pss_loadbin "D:/Research/Computer_Science/Projects/Practice/zpu/pss/pss/SW/onboard/Interrupts/Interrupts.bin"
#pss_discon
pss_cc com4 115200
pss_loadbin "D:/Research/Computer_Science/Projects/Practice/zpu/pss/pss/SW/onboard/Heartbeatdelay/heartbeatdelay.bin"
pss_discon
/trunk/pss/prj/DL-NEXYS2-1200E/DL_NEXYS2_1200E_PSS_top.xise
16,105 → 16,103
 
<files>
<file xil_pn:name="DL_NEXYS2_1200E_General.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="DL_NEXYS2_1200E_PSS_top.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="22"/>
</file>
<file xil_pn:name="../../hdl/debouncer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="20"/>
</file>
<file xil_pn:name="../../hdl/pss_soc_top.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="Implementation" xil_pn:seqID="4"/>
<association xil_pn:name="Implementation" xil_pn:seqID="21"/>
</file>
<file xil_pn:name="../../hdl/pss/pss.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="19"/>
</file>
<file xil_pn:name="../../hdl/pss/udm/uart_rx.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="16"/>
</file>
<file xil_pn:name="../../hdl/pss/udm/uart_tx.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="8"/>
<association xil_pn:name="Implementation" xil_pn:seqID="8"/>
<association xil_pn:name="Implementation" xil_pn:seqID="15"/>
</file>
<file xil_pn:name="../../hdl/pss/udm/udm.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="9"/>
<association xil_pn:name="Implementation" xil_pn:seqID="9"/>
<association xil_pn:name="Implementation" xil_pn:seqID="18"/>
</file>
<file xil_pn:name="../../hdl/pss/udm/udm_controller.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="10"/>
<association xil_pn:name="Implementation" xil_pn:seqID="10"/>
<association xil_pn:name="Implementation" xil_pn:seqID="14"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/zpu_uc.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="11"/>
<association xil_pn:name="Implementation" xil_pn:seqID="11"/>
<association xil_pn:name="Implementation" xil_pn:seqID="17"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/zpu_core/zpu_config.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="12"/>
<association xil_pn:name="Implementation" xil_pn:seqID="12"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/zpu_core/zpu_core.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="13"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/>
<association xil_pn:name="Implementation" xil_pn:seqID="11"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/zpu_core/zpu_core_stub.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="14"/>
<association xil_pn:name="Implementation" xil_pn:seqID="14"/>
<association xil_pn:name="Implementation" xil_pn:seqID="10"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/zpu_core/zpupkg.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="15"/>
<association xil_pn:name="Implementation" xil_pn:seqID="15"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/ram/ram.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="16"/>
<association xil_pn:name="Implementation" xil_pn:seqID="16"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/ram/ram_dual.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="17"/>
<association xil_pn:name="Implementation" xil_pn:seqID="17"/>
<association xil_pn:name="Implementation" xil_pn:seqID="12"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_busbridge.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="18"/>
<association xil_pn:name="Implementation" xil_pn:seqID="18"/>
<association xil_pn:name="Implementation" xil_pn:seqID="9"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_dma.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="19"/>
<association xil_pn:name="Implementation" xil_pn:seqID="19"/>
<association xil_pn:name="Implementation" xil_pn:seqID="8"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_edge_detector.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="20"/>
<association xil_pn:name="Implementation" xil_pn:seqID="20"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_ic.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="21"/>
<association xil_pn:name="Implementation" xil_pn:seqID="21"/>
<association xil_pn:name="Implementation" xil_pn:seqID="6"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_int_controller.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="22"/>
<association xil_pn:name="Implementation" xil_pn:seqID="22"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_motherblock.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="23"/>
<association xil_pn:name="Implementation" xil_pn:seqID="23"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_reset_cntrl.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="24"/>
<association xil_pn:name="Implementation" xil_pn:seqID="24"/>
<association xil_pn:name="Implementation" xil_pn:seqID="4"/>
</file>
<file xil_pn:name="../../hdl/pss/zpu_uc/motherblock/pss_sfr.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="25"/>
<association xil_pn:name="Implementation" xil_pn:seqID="25"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
</files>
 
<properties>
<property xil_pn:name="AES Initial Vector virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
128,8 → 126,6
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Reads Per Page" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Sync Mode" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
147,13 → 143,11
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Init" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate" xil_pn:value="Default (1)" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate virtex5" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
164,7 → 158,6
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cycles for First BPI Page Read" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="DCI Update Mode" xil_pn:value="As Required" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Decoder Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
173,7 → 166,6
<property xil_pn:name="Device Family" xil_pn:value="Spartan3E" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Disable JTAG Connection" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/>
180,26 → 172,20
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Hardware Co-Simulation" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream virtex6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select virtex6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="None Specified" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map virtex6" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Fallback Reconfiguration virtex7" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="Verilog" xil_pn:valueState="default"/>
223,12 → 209,9
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="HMAC Key (Hex String)" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ICAP Select" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
246,10 → 229,7
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG to XADC Connection" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Goal" xil_pn:value="Balanced" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Strategy" xil_pn:value="Xilinx Default (unlocked)" xil_pn:valueState="default"/>
261,23 → 241,20
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Effort Level" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="non-default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile virtex7" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Multiplier Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="32" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="24" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort virtex6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Strategy (Cover Mode)" xil_pn:value="Area" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
308,20 → 285,14
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream virtex7" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level (Overrides Overall Level)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="DL_NEXYS2_1200E_PSS_top_map.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="DL_NEXYS2_1200E_PSS_top_timesim.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="DL_NEXYS2_1200E_PSS_top_synthesis.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="DL_NEXYS2_1200E_PSS_top_translate.v" xil_pn:valueState="default"/>
<property xil_pn:name="Power Down Device if Over Safe Temperature" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map virtex6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Priority Encoder Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
332,13 → 303,10
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering virtex6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
364,7 → 332,6
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="SPI 32-bit Addressing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
372,9 → 339,7
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size virtex6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
390,8 → 355,6
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-5" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Address for Fallback Configuration virtex7" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100)" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Par" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
417,25 → 380,19
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use SPI Falling Edge" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Access Register Value" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="User Browsed Strategy Files" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-93" xil_pn:valueState="default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog 2001 Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCI Match (Output Events) virtex5" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DLL Lock (Output Events)" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for PLL Lock (Output Events) virtex6" xil_pn:value="No Wait" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Mode 7-series" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value 7-series" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="XOR Collapsing" xil_pn:value="true" xil_pn:valueState="default"/>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.