OpenCores
URL https://opencores.org/ocsvn/sdcard_mass_storage_controller/sdcard_mass_storage_controller/trunk

Subversion Repositories sdcard_mass_storage_controller

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /sdcard_mass_storage_controller/trunk/sim/rtl_sim/log
    from Rev 131 to Rev 136
    Reverse comparison

Rev 131 → Rev 136

/eth_tb_host.log
1,2 → 1,2
================ HOST Module Testbench access log ================
================ HOST Module Testbench access log ================
/eth_tb_wb_m_mon.log
1,4 → 1,4
============= WISHBONE Master Bus Monitor error log =============
Only ERRONEOUS conditions are logged !
============= WISHBONE Master Bus Monitor error log =============
Only ERRONEOUS conditions are logged !
/sd_tb_memory.log
1,2 → 1,2
=============== MEMORY Module Testbench access log ===============
=============== MEMORY Module Testbench access log ===============
/eth_tb_phy.log
1,2 → 1,2
================ PHY Module Testbench access log ================
================ PHY Module Testbench access log ================
/sd_model.log
1,3 → 1,3
**Error in sequnce, CMD 2 should precede 3 in Startup state
**Error in sequnce, CMD 2 should precede 3 in Startup state
**Error in sequnce, ACMD 41 should precede 2 in Startup state
**Error in sequnce, CMD 2 should precede 3 in Startup state
**Error in sequnce, CMD 2 should precede 3 in Startup state
**Error in sequnce, ACMD 41 should precede 2 in Startup state
/eth_tb_wb_s_mon.log
1,4 → 1,4
============== WISHBONE Slave Bus Monitor error log ==============
Only ERRONEOUS conditions are logged !
============== WISHBONE Slave Bus Monitor error log ==============
Only ERRONEOUS conditions are logged !
/sdc_tb.log
1,83 → 1,80
========================== SD IP Core Testbench results ===========================
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 2903
Test: TEST 0: 32-BIT READ-WRITE REGISTERS ( VARIOUS BUS DELAYS )
*FAILED* because
Register %h defaultvalue is not RSP ; 72
*************************************************************************************
*************************************************************************************
At time: 3215
Test: TEST 0: 32-BIT READ-WRITE REGISTERS ( VARIOUS BUS DELAYS )
*FAILED* because
Register %h defaultvalue is not RSP ; 28
*************************************************************************************
*************************************************************************************
At time: 3423
Test: TEST 0: 32-BIT READ-WRITE REGISTERS ( VARIOUS BUS DELAYS )
*FAILED* because
Register %h defaultvalue is not RSP ; 36
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: Send CMD
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 8077
Test: 0: Send CMD, No Response
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 61507
Test: 3.0: Init Seq, No Response
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 208147
Test: 4.0: Send data
reported *SUCCESSFULL*!
*************************************************************************************
*************************************************************************************
At time: 415419
Test: 4.0: Send data
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: Send CMD, with simulated bus error on SD_CMD line
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 443473
Test: Test 5 part 4: Send CMD2, 136-Bit
reported *SUCCESSFULL*!
*************************************************************************************
========================== SD IP Core Testbench results ===========================
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 4359
Test: TEST 0: 32-BIT READ-WRITE REGISTERS ( VARIOUS BUS DELAYS )
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: Send CMD
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 8077
Test: 0: Send CMD, No Response
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 61507
Test: 3.0: Init Seq, No Response
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 208563
Test: 4.0: Send data
reported *SUCCESSFULL*!
*************************************************************************************
*************************************************************************************
At time: 416251
Test: 4.0: Send data
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: Send CMD, With simulated bus error on SD_CMD line
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 444201
Test: Test 5 part 4: Send CMD2, 136-Bit
reported *SUCCESSFULL*!
*************************************************************************************
***************************************************************************************
***************************************************************************************
Heading: access_to_reg
***************************************************************************************
***************************************************************************************
*************************************************************************************
At time: 651889
Test: 4.0: Send data
reported *SUCCESSFULL*!
*************************************************************************************

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.