OpenCores
URL https://opencores.org/ocsvn/sincos/sincos/trunk

Subversion Repositories sincos

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /sincos/trunk/vhdl/tb
    from Rev 6 to Rev 7
    ↔ Reverse comparison
  •

Rev 6 → Rev 7

/clk_rst/clk_rst.vhd
0,0 → 1,112
--! @file
--! @brief clock for simulation with selectable frequency and reset with selectable width.
 
-- (c) jul 2007... Gerhard Hoffmann opencores@hoffmann-hochfrequenz.de
-- Published under BSD license
-- V1.0 first published version
--
--! @details Solution to an everyday problem.
--! This module produces a clock for a simulation with selectable frequency
--! and a reset signal with selectable width. The duty cycle is 1:1.
--! The reset is active from the beginning and removed synchronously shortly
--! after a rising clock edge.
--! setting verbose to true gives some diagnostics.
--
-- Make sure that your simulator has a time resolution of at least 1 ps.
-- For modelsim, this is set up by the various modelsim.ini files
-- and/or the project file (foobar.mpf)
 
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.math_real.all;
 
 
 
entity clk_rst is
generic (
verbose: boolean := false;
clock_frequency: real := 100.0e6; -- 100 MHz
min_resetwidth: time := 12 ns -- minimum resetwidth, is synchronized to clk
);
port (
clk: out std_logic;
rst: out std_logic
);
end entity clk_rst;
 
 
architecture rtl of clk_rst is
 
 
-- The clock frequency is given in Hz in floating point format.
-- compute the equivalent half cycle time.
 
function frequency2halfcycle(f: real; verbose: boolean) return time is
 
variable picoseconds: real;
variable retval: time;
begin
assert f > 1.0e-10
report "clk_and_rst.vhd: requested clock frequency is unreasonably low or even negative - danger of 1/0.0"
severity error;
 
picoseconds := (0.5 / f ) / 1.0e-12;
retval := integer(picoseconds) * 1 ps;
 
if verbose then
report "function frequency2halfcycle() in clk_rst.vhd: picoseconds = " & real'image(picoseconds);
report "halfcycle = " & time'image(retval);
end if;
assert retval > 0 ps
report "frequency2halfcycle(): length of halfcycle truncated to 0 ps. "
& "Set simulator resolution to 1 ps or smaller in modelsim.ini, foobar.mpf or whatever your simulator uses"
severity error;
 
return retval;
end;
 
 
signal iclk: std_logic := '0'; -- entity-internal clk and rst
signal irst: std_logic := '1';
 
constant halfcycle: time := frequency2halfcycle(clock_frequency, verbose);
 
----------------------------------------------------------------------------------------------------
begin
--
-- generate the internal system clock
u_sysclock: process is
begin
wait for halfcycle;
iclk <= '1';
wait for halfcycle;
iclk <= '0';
end process u_sysclock;
 
 
--
-- generate internal reset
 
u_rst: process is
begin
irst <= '1';
wait for min_resetwidth;
wait until rising_edge(iclk);
irst <= '0';
wait; -- forever
end process u_rst;
 
-- make the local signals public
 
clk <= iclk;
rst <= irst;
 
end architecture rtl;
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.