URL
https://opencores.org/ocsvn/uart_block/uart_block/trunk
Subversion Repositories uart_block
Compare Revisions
- This comparison shows the changes necessary to convert path
/uart_block/trunk/hdl/iseProject/_xmsgs
- from Rev 35 to Rev 36
- ↔ Reverse comparison
Rev 35 → Rev 36
/pn_parser.xmsgs
8,7 → 8,7
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. --> |
|
<messages> |
<msg type="info" file="ProjectMgmt" num="1061" ><arg fmt="%s" index="1">Parsing VHDL file "E:/uart_block/hdl/iseProject/testSerial_receiver.vhd" into library work</arg> |
<msg type="info" file="ProjectMgmt" num="1061" ><arg fmt="%s" index="1">Parsing VHDL file "E:/uart_block/hdl/iseProject/testUart_wishbone_slave.vhd" into library work</arg> |
</msg> |
|
</messages> |
/xst.xmsgs
5,969 → 5,969
behavior or data corruption. It is strongly advised that |
users do not edit the contents of this file. --> |
<messages> |
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">80</arg>: Unconnected output port '<arg fmt="%s" index="3">CYC_O</arg>' of component '<arg fmt="%s" index="4">SERIALMASTER</arg>'. |
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">88</arg>: Unconnected output port '<arg fmt="%s" index="3">CYC_O</arg>' of component '<arg fmt="%s" index="4">SERIALMASTER</arg>'. |
</msg> |
|
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">80</arg>: Unconnected output port '<arg fmt="%s" index="3">SEL_O</arg>' of component '<arg fmt="%s" index="4">SERIALMASTER</arg>'. |
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">88</arg>: Unconnected output port '<arg fmt="%s" index="3">SEL_O</arg>' of component '<arg fmt="%s" index="4">SERIALMASTER</arg>'. |
</msg> |
|
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">95</arg>: Unconnected output port '<arg fmt="%s" index="3">data_Avaible</arg>' of component '<arg fmt="%s" index="4">uart_wishbone_slave</arg>'. |
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/INTERCON_P2P.vhd</arg>" line <arg fmt="%d" index="2">104</arg>: Unconnected output port '<arg fmt="%s" index="3">data_Avaible</arg>' of component '<arg fmt="%s" index="4">uart_wishbone_slave</arg>'. |
</msg> |
|
<msg type="warning" file="Xst" num="1610" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/SERIALMASTER.vhd</arg>" line <arg fmt="%d" index="2">46</arg>: Width mismatch. <<arg fmt="%s" index="3">byteIncome</arg>> has a width of <arg fmt="%d" index="4">8</arg> bits but assigned expression is <arg fmt="%d" index="5">32</arg>-bit wide. |
<msg type="warning" file="Xst" num="1610" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/SERIALMASTER.vhd</arg>" line <arg fmt="%d" index="2">49</arg>: Width mismatch. <<arg fmt="%s" index="3">byteIncome</arg>> has a width of <arg fmt="%d" index="4">8</arg> bits but assigned expression is <arg fmt="%d" index="5">32</arg>-bit wide. |
</msg> |
|
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/uart_control.vhd</arg>" line <arg fmt="%d" index="2">62</arg>: Unconnected output port '<arg fmt="%s" index="3">reminder</arg>' of component '<arg fmt="%s" index="4">divisor</arg>'. |
<msg type="warning" file="Xst" num="753" delta="new" >"<arg fmt="%s" index="1">E:/uart_block/hdl/iseProject/uart_control.vhd</arg>" line <arg fmt="%d" index="2">65</arg>: Unconnected output port '<arg fmt="%s" index="3">reminder</arg>' of component '<arg fmt="%s" index="4">divisor</arg>'. |
</msg> |
|
<msg type="warning" file="Xst" num="647" delta="new" >Input <<arg fmt="%s" index="1">DAT_I<31:8></arg>> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. |
<msg type="warning" file="Xst" num="647" delta="old" >Input <<arg fmt="%s" index="1">DAT_I<31:8></arg>> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved. |
</msg> |
|
<msg type="warning" file="Xst" num="1305" delta="new" >Output <<arg fmt="%s" index="1">CYC_O</arg>> is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>. |
<msg type="warning" file="Xst" num="1305" delta="old" >Output <<arg fmt="%s" index="1">CYC_O</arg>> is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>. |
</msg> |
|
<msg type="warning" file="Xst" num="1305" delta="new" >Output <<arg fmt="%s" index="1">SEL_O</arg>> is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>. |
<msg type="warning" file="Xst" num="1305" delta="old" >Output <<arg fmt="%s" index="1">SEL_O</arg>> is never assigned. Tied to value <arg fmt="%s" index="2">0</arg>. |
</msg> |
|
<msg type="warning" file="Xst" num="1306" delta="new" >Output <<arg fmt="%s" index="1">data_avaible</arg>> is never assigned. |
<msg type="warning" file="Xst" num="1306" delta="old" >Output <<arg fmt="%s" index="1">data_avaible</arg>> is never assigned. |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_25> <half_cycle0_22> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_25> <half_cycle0_22> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_16> <half_cycle0_13> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_16> <half_cycle0_13> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_12> <half_cycle0_9> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_12> <half_cycle0_9> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_3> <half_cycle0_0> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_3> <half_cycle0_0> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_6> <half_cycle0_3> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_6> <half_cycle0_3> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_30> <half_cycle0_27> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_30> <half_cycle0_27> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_26> <half_cycle0_23> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_26> <half_cycle0_23> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_21> <half_cycle0_18> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_21> <half_cycle0_18> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_24> <half_cycle0_21> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_24> <half_cycle0_21> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_15> <half_cycle0_12> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_15> <half_cycle0_12> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_2> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_2> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_29> <half_cycle0_26> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_29> <half_cycle0_26> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_4> <half_cycle0_1> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_4> <half_cycle0_1> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">7 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><cycle_wait_oversample_31> <cycle_wait_oversample_30> <half_cycle_31> <half_cycle0_31> <half_cycle0_30> <half_cycle0_29> <half_cycle0_28> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">7 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><cycle_wait_oversample_31> <cycle_wait_oversample_30> <half_cycle_31> <half_cycle0_31> <half_cycle0_30> <half_cycle0_29> <half_cycle0_28> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_20> <half_cycle0_17> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_20> <half_cycle0_17> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_10> <half_cycle0_7> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_10> <half_cycle0_7> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_7> <half_cycle0_4> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_7> <half_cycle0_4> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_23> <half_cycle0_20> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_23> <half_cycle0_20> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_18> <half_cycle0_15> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_18> <half_cycle0_15> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_14> <half_cycle0_11> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_14> <half_cycle0_11> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_28> <half_cycle0_25> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_28> <half_cycle0_25> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_9> <half_cycle0_6> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_9> <half_cycle0_6> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_19> <half_cycle0_16> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_19> <half_cycle0_16> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_22> <half_cycle0_19> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_22> <half_cycle0_19> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_17> <half_cycle0_14> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_17> <half_cycle0_14> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_5> <half_cycle0_2> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_5> <half_cycle0_2> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_11> <half_cycle0_8> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_11> <half_cycle0_8> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_13> <half_cycle0_10> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_13> <half_cycle0_10> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_8> <half_cycle0_5> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_8> <half_cycle0_5> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_27> <half_cycle0_24> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>> in Unit <<arg fmt="%s" index="2">uBaudGen</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_27> <half_cycle0_24> </arg> |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_clk_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_clk_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">config_baud_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">config_baud_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uBaudGen</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uBaudGen</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uMasterSerial</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">N_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">N_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">D_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">D_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uDiv</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivDividend_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">sigDivNumerator_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">uUartControl</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">half_cycle0_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">baud_generator</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_25> <half_cycle0_22> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_23</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_25> <half_cycle0_22> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_16> <half_cycle0_13> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_14</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_16> <half_cycle0_13> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_12> <half_cycle0_9> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_10</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_12> <half_cycle0_9> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_3> <half_cycle0_0> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_1</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_3> <half_cycle0_0> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_6> <half_cycle0_3> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_4</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_6> <half_cycle0_3> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_30> <half_cycle0_27> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_28</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_30> <half_cycle0_27> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_26> <half_cycle0_23> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_24</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_26> <half_cycle0_23> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_21> <half_cycle0_18> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_19</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_21> <half_cycle0_18> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_24> <half_cycle0_21> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_22</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_24> <half_cycle0_21> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_15> <half_cycle0_12> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_13</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_15> <half_cycle0_12> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_2> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_0</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_2> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_29> <half_cycle0_26> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_27</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_29> <half_cycle0_26> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_4> <half_cycle0_1> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_2</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_4> <half_cycle0_1> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_20> <half_cycle0_17> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_18</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_20> <half_cycle0_17> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_10> <half_cycle0_7> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_8</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_10> <half_cycle0_7> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_7> <half_cycle0_4> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_5</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_7> <half_cycle0_4> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_23> <half_cycle0_20> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_21</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_23> <half_cycle0_20> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_18> <half_cycle0_15> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_16</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_18> <half_cycle0_15> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_14> <half_cycle0_11> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_12</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_14> <half_cycle0_11> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_28> <half_cycle0_25> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_26</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_28> <half_cycle0_25> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_9> <half_cycle0_6> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_7</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_9> <half_cycle0_6> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_19> <half_cycle0_16> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_17</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_19> <half_cycle0_16> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_22> <half_cycle0_19> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_20</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_22> <half_cycle0_19> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_17> <half_cycle0_14> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_15</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_17> <half_cycle0_14> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_5> <half_cycle0_2> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_3</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_5> <half_cycle0_2> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_11> <half_cycle0_8> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_9</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_11> <half_cycle0_8> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_13> <half_cycle0_10> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_11</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_13> <half_cycle0_10> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_8> <half_cycle0_5> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_6</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_8> <half_cycle0_5> </arg> |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_27> <half_cycle0_24> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">cycle_wait_oversample_25</arg>> in Unit <<arg fmt="%s" index="2">baud_generator</arg>> is equivalent to the following <arg fmt="%s" index="3">2 FFs/Latches</arg>, which will be removed : <arg fmt="%s" index="4"><half_cycle_27> <half_cycle0_24> </arg> |
</msg> |
|
<msg type="warning" file="Xst" num="1293" delta="new" >FF/Latch <<arg fmt="%s" index="1">cycles2Wait_0</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch <<arg fmt="%s" index="1">cycles2Wait_0</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_1</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_1</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_2</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_2</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_4</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_4</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_5</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_5</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_23</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">cycles2Wait_23</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">nextState_1</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">nextState_1</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1896" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">nextState_5</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1896" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">nextState_5</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">SERIALMASTER</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="info" file="Xst" num="2261" delta="new" >The FF/Latch <<arg fmt="%s" index="1">current_s_FSM_FFd1</arg>> in Unit <<arg fmt="%s" index="2">serial_receiver</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><data_ready> </arg> |
<msg type="info" file="Xst" num="2261" delta="old" >The FF/Latch <<arg fmt="%s" index="1">current_s_FSM_FFd1</arg>> in Unit <<arg fmt="%s" index="2">serial_receiver</arg>> is equivalent to the following <arg fmt="%s" index="3">FF/Latch</arg>, which will be removed : <arg fmt="%s" index="4"><data_ready> </arg> |
</msg> |
|
<msg type="warning" file="Xst" num="2042" delta="new" >Unit <arg fmt="%s" index="1">uart_control</arg>: <arg fmt="%d" index="2">32</arg> internal tristates are replaced by logic (pull-up <arg fmt="%s" index="3">yes</arg>): </msg> |
<msg type="warning" file="Xst" num="2042" delta="old" >Unit <arg fmt="%s" index="1">uart_control</arg>: <arg fmt="%d" index="2">32</arg> internal tristates are replaced by logic (pull-up <arg fmt="%s" index="3">yes</arg>): </msg> |
|
<msg type="warning" file="Xst" num="1293" delta="new" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1293" delta="new" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1293" delta="new" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1293" delta="old" >FF/Latch <<arg fmt="%s" index="1">waitBestPoint_3</arg>> has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">serial_receiver</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_clk_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/config_baud_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivNumerator_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/sigDivDividend_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/D_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/N_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/R_31</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/R_31</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_0</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_0</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_1</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_1</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_2</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_2</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_3</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_3</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_4</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_4</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_5</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_5</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_6</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_6</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_7</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_7</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_8</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_8</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_9</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_9</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_10</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_10</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_11</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_11</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_12</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_12</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_13</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_13</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_14</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_14</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_15</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_15</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_16</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_16</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_17</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_17</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_18</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_18</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_19</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_19</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_20</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_20</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_21</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_21</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_22</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_22</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_23</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_23</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_24</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_24</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_25</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_25</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_26</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_26</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_27</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_27</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_28</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_28</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_29</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_29</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_30</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_30</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="2677" delta="new" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_31</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
<msg type="warning" file="Xst" num="2677" delta="old" >Node <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/uDiv/reminder_31</arg>> of sequential type is unconnected in block <<arg fmt="%s" index="2">INTERCON_P2P</arg>>. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1895" delta="new" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1895" delta="old" >Due to other FF/Latch trimming, FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_31</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_30</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_29</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_28</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_27</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_26</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_24</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_18</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_11</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_10</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
<msg type="warning" file="Xst" num="1710" delta="old" >FF/Latch <<arg fmt="%s" index="1">uUartWishboneSlave/uUartControl/Mtridata_DAT_O_8</arg>> (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block <<arg fmt="%s" index="3">INTERCON_P2P</arg>>. This FF/Latch will be trimmed during the optimization process. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<11></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<11></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<18></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<18></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<24></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<24></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<26></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<26></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<27></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<27></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<28></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<28></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<29></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<29></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<30></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<30></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<31></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<31></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="warning" file="Xst" num="638" delta="new" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<8></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
<msg type="warning" file="Xst" num="638" delta="old" >in unit <arg fmt="%s" index="1">INTERCON_P2P</arg> Conflict on KEEP property on signal <arg fmt="%s" index="2">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<8></arg> and <arg fmt="%s" index="3">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> <arg fmt="%s" index="4">uUartWishboneSlave/uUartControl/Mtridata_DAT_O<10></arg> signal will be lost. |
</msg> |
|
<msg type="info" file="Xst" num="2169" delta="new" >HDL ADVISOR - Some clock signals were not automatically buffered by XST with BUFG/BUFR resources. Please use the buffer_type constraint in order to insert these buffers to the clock signals to help prevent skew problems. |
<msg type="info" file="Xst" num="2169" delta="old" >HDL ADVISOR - Some clock signals were not automatically buffered by XST with BUFG/BUFR resources. Please use the buffer_type constraint in order to insert these buffers to the clock signals to help prevent skew problems. |
</msg> |
|
</messages> |