URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
Compare Revisions
- This comparison shows the changes necessary to convert path
/w11/tags/w11a_V0.6/tools/oskit/rsx11m-40_rk
- from Rev 23 to Rev 24
- ↔ Reverse comparison
Rev 23 → Rev 24
/README_rsx11m-40_rkset.txt
0,0 → 1,83
# $Id: README_rsx11m-40_rkset.txt 558 2014-06-01 22:20:51Z mueller $ |
|
Notes on oskit: RSX-11M V4.0 system on RK05 volumes |
|
Table of content: |
|
1. General remarks |
2. Installation |
3. Usage |
|
1. General remarks --------------------------------------------------- |
|
See notes, especially on legal terms, in $RETROBASE/doc/w11a_os_guide.txt |
|
Also read README_license.txt which is included in the oskit !! |
|
2. Installation ------------------------------------------------------ |
|
- A disk set is available from |
http://www.retro11.de/data/oc_w11/oskits/rsx11m-40_rkset.tgz |
Download, unpack and copy the disk images (*.dsk), e.g. |
|
cd $RETROBASE/tools/oskit/rsx11m-40_rk |
wget http://www.retro11.de/data/oc_w11/oskits/rsx11m-40_rkset.tgz |
tar -xzf rsx11m-40_rkset.tgz |
|
3. Usage ------------------------------------------------------------- |
|
- Start them in simulator |
pdp11 rsx11m-40_rk_boot.scmd |
or ONLY IF YOU HAVE A VALID LICENSE on w11a |
ti_w11 -u @rsx11m-40_rk_boot.tcl |
|
- Hit <ENTER> in the xterm window to connect to simh or backend server. |
The boot dialog in the console xterm window will look like |
(required input is in {..}, with {<CR>} denoting a carriage return: |
|
RSX-11M V4.0 BL32 1920.K MAPPED |
>RED DK:=SY: |
>RED DK:=LB: |
>MOU DK:SYSM40RKV0 |
>@DK:[1,2]STARTUP |
|
This os version was released in November 1981, so it's no suprise |
that it is not y2k ready. So enter a date before prior to 2000. |
|
>* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]: {<.. see above ..>} |
>TIM 18:17 12-may-83 |
>* ENTER LINE WIDTH OF THIS TERMINAL [D D:132.]: {<CR>} |
>SET /BUF=TI:132. |
>ACS SY:/BLKS=512. |
>CLI /INIT=DCL/TASK=...DCL |
>; |
>; mount 2nd system disk |
>; |
>mou dk1:SYSM40RKV1/pub |
>; |
>; installing tasks from 2nd system disk |
>; |
>INS DK1:$BRU |
>INS DK1:$DMP |
>INS DK1:$DSC |
>INS DK1:$EDT |
>INS DK1:$FLX |
>INS DK1:$K11RSX/TASK=...KER |
>INS DK1:$LBR |
>INS DK1:$MAC |
>INS DK1:$RMD |
>INS DK1:$SLP |
>INS DK1:$SRD |
>INS DK1:$TEC |
>INS DK1:$TEC/TASK=...MAK |
>INS DK1:$TKB |
>INS DK1:$VFY |
>INS DK1:$VTEC |
>@ <EOF> |
> |
|
Now you are at the MCR prompt and can exercise the system. |
|
At end is important to shutdown properly with a 'run $shutup'. |
The simululaor (or the rlink backend) can be stopped when the |
CPU has halted. |
/rsx11m-40_rk_boot.scmd
0,0 → 1,15
; $Id: rsx11m-40_rk_boot.scmd 525 2013-07-06 12:19:39Z mueller $ |
; |
; Setup file for RSX11-M V4.0 RK05 based system |
; |
; Usage: |
; |
; pdp11 rsx11m-40_rk_boot.scmd |
; |
do ../../simh/setup_w11a_max.scmd |
; |
att rk0 RSX11M_V4.0_SYSTEM0.dsk |
att rk1 RSX11M_V4.0_SYSTEM1.dsk |
att rk2 RSX11M_USER.dsk |
; |
boo rk0 |
/rsx11m-40_rk_boot.tcl
0,0 → 1,28
# $Id: rsx11m-40_rk_boot.tcl 525 2013-07-06 12:19:39Z mueller $ |
# |
# Setup file for RSX11-M V4.0 RK05 based system |
# |
# Usage: |
# |
# telnet_starter -d DL0 & |
# telnet_starter -d DL1 & |
# ti_w11 -xxx @rsx11m-40_rk_boot.tcl ( -xxx depends on sim or fpga connect) |
# |
|
# setup w11 cpu |
puts [rlw] |
|
# setup tt,lp,pp (enable rx rate limiter on old DEC OS) |
rw11::setup_tt "cpu0" {dlrlim 5} |
rw11::setup_lp |
rw11::setup_pp |
|
# mount disks |
cpu0rka0 att RSX11M_V4.0_SYSTEM0.dsk |
cpu0rka1 att RSX11M_V4.0_SYSTEM1.dsk |
cpu0rka2 att RSX11M_USER.dsk |
|
# and boot |
rw11::cpumon |
rw11::cpucons |
cpu0 boot rka0 |
/.cvsignore
0,0 → 1,4
*.dat |
*.dsk |
*.log |
*license.txt |
.
Property changes :
Added: svn:ignore
## -0,0 +1,36 ##
+*.dep_ghdl
+*.dep_isim
+*.dep_xst
+work-obj93.cf
+*.vcd
+*.ghw
+*.sav
+*.tmp
+*.exe
+ise
+xflow.his
+*.ngc
+*.ncd
+*.pcf
+*.bit
+*.msk
+isim
+isim.log
+isim.wdb
+fuse.log
+*_[sft]sim.vhd
+*_tsim.sdf
+*_xst.log
+*_tra.log
+*_twr.log
+*_map.log
+*_par.log
+*_pad.log
+*_bgn.log
+*_svn.log
+*_sum.log
+*_[dsft]sim.log
+*.dat
+*.dsk
+*.log
+*license.txt