OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /w11/tags/w11a_V0.61/tools/oskit/211bsd_rk
    from Rev 25 to Rev 26
    ↔ Reverse comparison
  •

Rev 25 → Rev 26

/README_211bsd_rkset.txt
0,0 → 1,123
# $Id: README_211bsd_rkset.txt 558 2014-06-01 22:20:51Z mueller $
 
Notes on oskit: 2.11BSD system on RK05 volumes
 
Table of content:
 
1. General remarks
2. Installation
3. Usage
 
1. General remarks ---------------------------------------------------
 
See notes on
 
1. I/O emulation setup
2. FPGA Board setup
3. Rlink and Backend Server setup
4. Legal terms
 
in $RETROBASE/doc/w11a_os_guide.txt
 
2. Installation ------------------------------------------------------
 
- A disk set is available from
http://www.retro11.de/data/oc_w11/oskits/211bsd_rkset.tgz
Download, unpack and copy the disk images (*.dsk), e.g.
 
cd $RETROBASE/tools/oskit/211bsd_rk/
wget http://www.retro11.de/data/oc_w11/oskits/211bsd_rkset.tgz
tar -xzf 211bsd_rkset.tgz
 
3. Usage -------------------------------------------------------------
 
- Start backend server and boot system (see section 3 in w11a_os_guide.txt)
boot script: 211bsd_rk_boot.tcl
example: ti_w11 -u @211bsd_rk_boot.tcl
 
- Hit <ENTER> in the xterm window to connnect to backend server.
The boot dialog in the console xterm window will look like
(required input is in {..}, with {<CR>} denoting a carriage return:
 
70Boot from rk(0,0,0) at 0177404
: {<CR>}
: rk(0,0,0)unix
Boot: bootdev=03000 bootcsr=0177404
2.11 BSD UNIX #26: Thu Jan 1 19:49:13 PST 2009
root@curly.2bsd.com:/usr/src/sys/RETRONFPRK
phys mem = 3932160
avail mem = 3577856
user mem = 307200
January 4 16:45:33 init: configure system
dz ? csr 160100 vector 310 skipped: No CSR.
lp 0 csr 177514 vector 200 attached
rk ? csr 177400 vector 220 didn't interrupt.
rl ? csr 174400 vector 160 skipped: No CSR.
tm ? csr 172520 vector 224 skipped: No CSR.
xp ? csr 176700 vector 254 skipped: No CSR.
cn 1 csr 176500 vector 300 attached
erase, kill ^U, intr ^C
 
In first '#' prompt the system is in single-user mode. Just enter a ^D
to continue the system startup to multi-user mode:
 
#^D
checking quotas: done.
Assuming non-networking system ...
checking for core dump...
preserving editor files
clearing /tmp
standard daemons: update cron accounting.
starting lpd
starting local daemons:Sun Jan 4 16:46:37 PST 2009
January 4 16:46:37 init: kernel security level changed from 0 to 1
January 4 16:46:40 getty: /dev/tty01: Device not configured
...
2.11 BSD UNIX (curly.2bsd.com) (console)
login:
 
The login prompt is sometimes mangled with the 'Device not configured'
system messages, if its not visible just hit <ENTER> to get a fresh one.
 
login: {root}
erase, kill ^U, intr ^C
 
Now the system is in multi-user mode, daemons runnng. You can explore
the system, e.g. with a 'pstat -T' or a 'mount' command. The second
xterm can be activated too, it will connect to a second emulated DL11.
At the end is important to shutdown properly with a 'halt':
 
# {pstat -T}
7/186 files
39/208 inodes
11/150 processes
6/ 46 texts active, 28 used
2/135 swapmap entries, 366 kB used, 2069 kB free, 2063 kB max
33/150 coremap entries, 2960 kB free, 2867 kB max
1/ 10 ub_map entries, 10 free, 10 max
# {mount}
/dev/rk0h on /
/dev/rk2h on /tmp
/dev/rk3h on /bin
/dev/rk4h on /usr
# {halt}
syncing disks... done
halting
 
While the system was running the server process display the
cpumon>
prompt. When the w11 has halted after 211bsd shutdown a message like
 
CPU down attention
Processor registers and status:
PS: 030350 cm,pm=k,u s,p,t=0,7,0 NZVC=1000 rust: 01 HALTed
R0: 177560 R1: 161322 R2: 053436 R3: 000010
R4: 003000 R5: 147510 SP: 147466 PC: 000014
will be visible. Now the server process can be stopped with ^D.
/211bsd_rk_boot.scmd
0,0 → 1,19
; $Id: 211bsd_rk_boot.scmd 519 2013-05-12 20:44:16Z mueller $
;
; Setup file for 211bsd RK based system
;
; Usage:
;
; pdp11 211bsd_rk_boot.scmd
;
do ../../simh/setup_w11a_max.scmd
set tto 7b
set dlo0 7b
;
att rk0 211bsd_rk_root.dsk
att rk1 211bsd_rk_swap.dsk
att rk2 211bsd_rk_tmp.dsk
att rk3 211bsd_rk_bin.dsk
att rk4 211bsd_rk_usr.dsk
;
boo rk0
/211bsd_rk_boot.tcl
0,0 → 1,29
# $Id: 211bsd_rk_boot.tcl 517 2013-05-09 21:34:45Z mueller $
#
# Setup file for 211bsd RK05 based system
#
# Usage:
#
# telnet_starter -d DL0 &
# telnet_starter -d DL1 &
# ti_w11 -xxx @211bsd_rk_boot.tcl ( -xxx depends on sim or fpga connect)
#
 
# setup w11 cpu
puts [rlw]
 
# setup tt,lp (211bsd uses parity -> use 7 bit mode)
rw11::setup_tt "cpu0" {to7bit 1}
rw11::setup_lp
 
# mount disks
cpu0rka0 att 211bsd_rk_root.dsk
cpu0rka1 att 211bsd_rk_swap.dsk
cpu0rka2 att 211bsd_rk_tmp.dsk
cpu0rka3 att 211bsd_rk_bin.dsk
cpu0rka4 att 211bsd_rk_usr.dsk
 
# and boot
rw11::cpumon
rw11::cpucons
cpu0 boot rka0
/.cvsignore
0,0 → 1,5
*.dat
*.dsk
*.log
*license.txt
*license.pdf
/.
. Property changes : Added: svn:ignore ## -0,0 +1,38 ## +*.dep_ghdl +*.dep_isim +*.dep_xst +work-obj93.cf +*.vcd +*.ghw +*.sav +*.tmp +*.exe +ise +xflow.his +*.ngc +*.ncd +*.pcf +*.bit +*.msk +isim +isim.log +isim.wdb +fuse.log +*_[sft]sim.vhd +*_tsim.sdf +*_xst.log +*_tra.log +*_twr.log +*_map.log +*_par.log +*_tsi.log +*_pad.log +*_bgn.log +*_svn.log +*_sum.log +*_[dsft]sim.log +*.dat +*.dsk +*.log +*license.txt +*license.pdf

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.