URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
Compare Revisions
- This comparison shows the changes necessary to convert path
/w11/tags/w11a_V0.61/tools/oskit/rt11-40_rk
- from Rev 25 to Rev 26
- ↔ Reverse comparison
Rev 25 → Rev 26
/README_rt11-40_rkset.txt
0,0 → 1,61
# $Id: README_rt11-40_rkset.txt 558 2014-06-01 22:20:51Z mueller $ |
|
Notes on oskit: RT-11 V4.0 system on RK05 volumes |
|
Table of content: |
|
1. General remarks |
2. Installation |
3. Usage |
|
1. General remarks --------------------------------------------------- |
|
See notes, especially on legal terms, in $RETROBASE/doc/w11a_os_guide.txt |
|
Also read README_license.txt which is included in the oskit !! |
|
2. Installation ------------------------------------------------------ |
|
- A disk set is available from |
http://www.retro11.de/data/oc_w11/oskits/rsx11m-31_rkset.tgz |
Download, unpack and copy the disk images (*.dsk), e.g. |
|
cd $RETROBASE/tools/oskit/rt11-40_rk |
wget http://www.retro11.de/data/oc_w11/oskits/rt11-40_rkset.tgz |
tar -xzf rt11-40_rkset.tgz |
|
3. Usage ------------------------------------------------------------- |
|
- Start them in simulator |
pdp11 rt11-40_rk_boot.scmd |
or ONLY IF YOU HAVE A VALID LICENSE on w11a |
ti_w11 -u @rt11-40_rk_boot.tcl |
|
- Hit <ENTER> in the xterm window to connect to simh or backend server. |
The boot dialog in the console xterm window will look like |
(required input is in {..}, with {<CR>} denoting a carriage return: |
|
RT-11SJ V04.00C |
|
.D 56=5015 |
|
.TYPE V4USER.TXT |
Welcome to RT-11 Version 4. RT-11 V04 provides new hardware support |
and some major enhancements over Version 3B. |
|
Please use the HELP command; it describes the new options in many |
of the utilities. |
|
If you are using a terminal that requires fill characters, |
modify location 56 with a Deposit command before proceeding with |
system installation. LA36 DECwriter II and VT52 DECscope terminals |
do NOT require such modification. |
|
.D 56=0 |
|
. |
|
Now you are at the RT-11 prompt and can exercise the system. |
|
There is no 'halt' or 'shutdown' command, just terminate the |
simulator or backend server session. |
/rt11-40_rk_boot.tcl
0,0 → 1,25
# $Id: rt11-40_rk_boot.tcl 517 2013-05-09 21:34:45Z mueller $ |
# |
# Setup file for RT-11 V4.0 RK05 based system |
# |
# Usage: |
# |
# telnet_starter -d DL0 & |
# ti_w11 -xxx @rt11-40_rk_boot.tcl ( -xxx depends on sim or fpga connect) |
# |
|
# setup w11 cpu |
puts [rlw] |
|
# setup tt,lp,pp (single console; enable rx rate limiter on old DEC OS) |
rw11::setup_tt "cpu0" {ndl 1 dlrlim 5} |
rw11::setup_lp |
rw11::setup_pp |
|
# mount disks |
cpu0rka0 att rtv4_rk.dsk |
|
# and boot |
rw11::cpumon |
rw11::cpucons |
cpu0 boot rka0 |
/rt11-40_rk_boot.scmd
0,0 → 1,13
; $Id: rt11-40_rk_boot.scmd 517 2013-05-09 21:34:45Z mueller $ |
; |
; Setup file for RT-11 V4.0 RK05 based system |
; |
; Usage: |
; |
; pdp11 rt11-40_rk_boot.scmd |
; |
do ../../simh/setup_w11a_min.scmd |
; |
att rk0 rtv4_rk.dsk |
; |
boo rk0 |
/.cvsignore
0,0 → 1,4
*.dat |
*.dsk |
*.log |
*license.txt |
.
Property changes :
Added: svn:ignore
## -0,0 +1,37 ##
+*.dep_ghdl
+*.dep_isim
+*.dep_xst
+work-obj93.cf
+*.vcd
+*.ghw
+*.sav
+*.tmp
+*.exe
+ise
+xflow.his
+*.ngc
+*.ncd
+*.pcf
+*.bit
+*.msk
+isim
+isim.log
+isim.wdb
+fuse.log
+*_[sft]sim.vhd
+*_tsim.sdf
+*_xst.log
+*_tra.log
+*_twr.log
+*_map.log
+*_par.log
+*_tsi.log
+*_pad.log
+*_bgn.log
+*_svn.log
+*_sum.log
+*_[dsft]sim.log
+*.dat
+*.dsk
+*.log
+*license.txt