URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
Compare Revisions
- This comparison shows the changes necessary to convert path
/w11/tags/w11a_V0.61/tools/simh
- from Rev 25 to Rev 26
- ↔ Reverse comparison
Rev 25 → Rev 26
/setup_w11a_min.scmd
0,0 → 1,85
; $Id: setup_w11a_min.scmd 559 2014-06-06 21:26:47Z mueller $ |
; |
; Setup file for 'minimal' w11a configuration under simh 3.8 and above |
; |
; This setup reflects the minimal w11a system on a S3BOARD |
; --> 1MByte, 2 DL11, LP+PC, RK05 |
; |
; 11/70 CPU no FPP, 1 MByte memory |
; 2 DL11 |
; 0 DZ11 |
; 1 LP11 |
; 1 PC11 |
; 1 RK11 + 8 RK05 drives |
; 0 RL11 + 0 RL01/02 drives |
; 0 RH70 + 0 RP06 drives |
; 0 TM11 + 0 drives |
; 0 DEUNA |
; |
; processor options |
; |
set cpu 11/70 |
set cpu nofpp |
set cpu 1m |
set cpu oct |
set cpu idle |
; |
; clock options |
; |
set clk 50hz |
; |
; terminal interface options |
; the default tti time=0 setting gives 50 chars/sec, slow |
; setting time=50000 (means 1 char every 50000 instructions) is much |
; faster and seems still save for old DEC OS like XXDP, RT-11, RXS11-M |
; |
set cons log=simh_dl0.log |
dep tti time 50000 |
set tto 8b |
; |
; 2nd DL11 interface options |
; Note: set dli vector=300 not allowed, rely on autoconf to set vec->300 |
; Note: default for DLO's is UC ! -> set to 8bit |
; |
set dli enabled |
set dli lines=1 |
att dli 5670 |
set dlo0 log=simh_dl1.log |
set dlo0 8b |
; |
; line printer |
; |
set lpt enabled |
att lpt simh_lpt.dat |
; |
; paper tape read/punch |
; |
set ptr enabled |
set ptp enabled |
att ptp simh_ptp.dat |
; |
; disk drives |
; |
set rk enabled |
; |
; tape drives (none) |
; ethernet interfaces (none) |
; |
; DISABLE all else |
; |
set dz disabled |
set rl disabled |
set rha disabled |
set rp disabled |
set tm disabled |
set xu disabled |
; |
set cr disabled |
set vh disabled |
set hk disabled |
set rx disabled |
set rq disabled |
set tq disabled |
; |
;sho conf |
; |
/setup_w11a_max.scmd
0,0 → 1,97
; $Id: setup_w11a_max.scmd 559 2014-06-06 21:26:47Z mueller $ |
; |
; Setup file for 'maximal' w11a configuration under simh 3.8 and above |
; |
; This setup reflects the full w11a system on a Nexys[234] board |
; --> 4 MByte, 2 DL11, DZ+LP+PC, RK05+RL02+RP06+TM11, DEUNA |
; |
; 11/70 CPU no FPP, 4 MByte memory |
; 2 DL11 |
; 1 DZ11 |
; 1 LP11 |
; 1 PC11 |
; 1 RK11 + 8 RK05 drives |
; 1 RL11 + 4 RL01/02 drives |
; 1 RH70 + 4 RP06 drives |
; 1 TM11 + 4 drives |
; 1 DEUNA |
; |
; processor options |
; |
set cpu 11/70 |
set cpu nofpp |
set cpu 4m |
set cpu oct |
set cpu idle |
; |
; clock options |
; |
set clk 50hz |
; |
; terminal interface options |
; the default tti time=0 setting gives 50 chars/sec, slow |
; setting time=50000 (means 1 char every 50000 instructions) is much |
; faster and seems still save for old DEC OS like XXDP, RT-11, RXS11-M |
; |
set cons log=simh_dl0.log |
dep tti time 50000 |
set tto 8b |
; |
; 2nd DL11 interface options |
; Note: set dli vector=300 not allowed, rely on autoconf to set vec->300 |
; Note: default for DLO's is UC ! -> set to 8bit |
; |
set dli enabled |
set dli lines=1 |
att dli 5670 |
set dlo0 log=simh_dl1.log |
set dlo0 8b |
; |
set dz enabled |
set dz lines=8 |
set dz vector=310 |
att dz -m 5671 |
set dz log=0=simh_dz0.log |
set dz log=1=simh_dz1.log |
set dz log=2=simh_dz2.log |
; dz log file names must be quoted, otherwise they'll be uppercased ! |
; |
; line printer |
; |
set lpt enabled |
att lpt simh_lpt.dat |
; |
; paper tape read/punch |
; |
set ptr enabled |
set ptp enabled |
att ptp simh_ptp.dat |
; |
; disk drives |
; |
set rk enabled |
; |
set rl enabled |
; |
set rha enabled |
set rp enabled |
; |
; tape drives |
; |
set tm enabled |
; |
; ethernet interfaces |
; |
set xu enabled |
; |
; DISABLE all else |
; |
set cr disabled |
set vh disabled |
set hk disabled |
set rx disabled |
set rq disabled |
set tq disabled |
; |
;sho conf |
; |
.
Property changes :
Added: svn:ignore
## -0,0 +1,33 ##
+*.dep_ghdl
+*.dep_isim
+*.dep_xst
+work-obj93.cf
+*.vcd
+*.ghw
+*.sav
+*.tmp
+*.exe
+ise
+xflow.his
+*.ngc
+*.ncd
+*.pcf
+*.bit
+*.msk
+isim
+isim.log
+isim.wdb
+fuse.log
+*_[sft]sim.vhd
+*_tsim.sdf
+*_xst.log
+*_tra.log
+*_twr.log
+*_map.log
+*_par.log
+*_tsi.log
+*_pad.log
+*_bgn.log
+*_svn.log
+*_sum.log
+*_[dsft]sim.log