URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
Compare Revisions
- This comparison shows the changes necessary to convert path
/System09/trunk/rtl/System09_Digilent_3S200
- from Rev 111 to Rev 99
- ↔ Reverse comparison
Rev 111 → Rev 99
/system09.ise
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
system09.ise
Property changes :
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: system09.lso
===================================================================
--- system09.lso (revision 111)
+++ system09.lso (nonexistent)
@@ -1 +0,0 @@
-work
Index: system09.prj
===================================================================
--- system09.prj (revision 111)
+++ system09.prj (nonexistent)
@@ -1,15 +0,0 @@
-vhdl work "../VHDL/bit_funcs.vhd"
-vhdl work "../VHDL/ACIA_Clock.vhd"
-vhdl work "../Spartan3/keymap_rom512_b4.vhd"
-vhdl work "../../src/sys09bug/sys09s3s.vhd"
-vhdl work "../../src/Flex9/flex9ram.vhd"
-vhdl work "../VHDL/ps2_keyboard.vhd"
-vhdl work "../Spartan3/ram2k_b16.vhd"
-vhdl work "../Spartan3/char_rom2k_b16.vhd"
-vhdl work "../VHDL/vdu8.vhd"
-vhdl work "../VHDL/keyboard.vhd"
-vhdl work "../VHDL/datram.vhd"
-vhdl work "../VHDL/cpu09.vhd"
-vhdl work "../VHDL/SevenSegment.vhd"
-vhdl work "../VHDL/acia6850.vhd"
-vhdl work "System09_Digilent_3S200.vhd"
Index: system09.ut
===================================================================
--- system09.ut (revision 111)
+++ system09.ut (nonexistent)
@@ -1,29 +0,0 @@
--m
--w
--g DebugBitstream:No
--g Binary:no
--g CRC:Enable
--g ConfigRate:6
--g CclkPin:PullUp
--g M0Pin:PullUp
--g M1Pin:PullUp
--g M2Pin:PullUp
--g ProgPin:PullUp
--g DonePin:PullUp
--g TckPin:PullUp
--g TdiPin:PullUp
--g TdoPin:PullUp
--g TmsPin:PullUp
--g UnusedPin:PullDown
--g UserID:0xFFFFFFFF
--g DCMShutdown:Disable
--g DCIUpdateMode:AsRequired
--g StartUpClk:CClk
--g DONE_cycle:4
--g GTS_cycle:5
--g GWE_cycle:6
--g LCK_cycle:NoWait
--g Match_cycle:Auto
--g Security:None
--g DonePipe:No
--g DriveDone:No
Index: system09.xst
===================================================================
--- system09.xst (revision 111)
+++ system09.xst (nonexistent)
@@ -1,53 +0,0 @@
-set -tmpdir "./xst/projnav.tmp"
-set -xsthdpdir "./xst"
-run
--ifn system09.prj
--ifmt mixed
--ofn system09
--ofmt NGC
--p xc3s200-5-ft256
--top system09
--opt_mode Speed
--opt_level 1
--iuc NO
--lso system09.lso
--keep_hierarchy NO
--rtlview Yes
--glob_opt AllClockNets
--read_cores YES
--write_timing_constraints NO
--cross_clock_analysis NO
--hierarchy_separator /
--bus_delimiter <>
--case maintain
--slice_utilization_ratio 100
--verilog2001 YES
--fsm_extract YES -fsm_encoding Auto
--safe_implementation No
--fsm_style lut
--ram_extract Yes
--ram_style Distributed
--rom_extract Yes
--mux_style Auto
--decoder_extract YES
--priority_extract YES
--shreg_extract YES
--shift_extract YES
--xor_collapse YES
--rom_style Distributed
--mux_extract YES
--resource_sharing YES
--mult_style auto
--iobuf YES
--max_fanout 500
--bufg 8
--register_duplication YES
--register_balancing No
--slice_packing YES
--optimize_primitives NO
--use_clock_enable Yes
--use_sync_set Yes
--use_sync_reset Yes
--iob auto
--equivalent_register_removal YES
--slice_utilization_ratio_maxmargin 5
Index: System09_Digilent_3S200.vhd
===================================================================
--- System09_Digilent_3S200.vhd (revision 111)
+++ System09_Digilent_3S200.vhd (revision 99)
@@ -157,7 +157,7 @@
use IEEE.STD_LOGIC_UNSIGNED.ALL;
use ieee.numeric_std.all;
-entity system09 is
+entity my_system09 is
port(
sys_clk : in Std_Logic; -- System Clock input
rst_sw : in Std_logic; -- Master Reset input (active high)
@@ -201,12 +201,12 @@
segments : out std_logic_vector(7 downto 0);
digits : out std_logic_vector(3 downto 0)
);
-end system09;
+end my_system09;
-------------------------------------------------------------------------------
-- Architecture for System09
-------------------------------------------------------------------------------
-architecture my_computer of system09 is
+architecture my_computer of my_system09 is
-----------------------------------------------------------------------------
-- constants
-----------------------------------------------------------------------------
/my_system09.prj
0,0 → 1,15
vhdl work "../VHDL/bit_funcs.vhd" |
vhdl work "../VHDL/ACIA_Clock.vhd" |
vhdl work "../Spartan3/keymap_rom512_b4.vhd" |
vhdl work "../../src/sys09bug/sys09s3s.vhd" |
vhdl work "../../src/Flex9/flex9ram.vhd" |
vhdl work "../VHDL/ps2_keyboard.vhd" |
vhdl work "../Spartan3/ram2k_b16.vhd" |
vhdl work "../Spartan3/char_rom2k_b16.vhd" |
vhdl work "../VHDL/vdu8.vhd" |
vhdl work "../VHDL/keyboard.vhd" |
vhdl work "../VHDL/datram.vhd" |
vhdl work "../VHDL/cpu09.vhd" |
vhdl work "../VHDL/SevenSegment.vhd" |
vhdl work "../VHDL/acia6850.vhd" |
vhdl work "System09_Digilent_3S200.vhd" |
/Makefile
38,7 → 38,7
# |
# This name must match the name of the design in Xilinx ISE (case |
# sensitive). |
DESIGN_NAME := system09 |
DESIGN_NAME := my_system09 |
# |
# Constraint file (unfortunately it cannot be extracted from ISE) |
UCF_FILE := System09_Digilent_3S200.ucf |
106,7 → 106,7
clean: |
-$(MAKE) -C ../../src/sys09bug clean |
-$(MAKE) -C ../../src/Flex9 clean |
-$(RM) *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp *.xrpt |
-$(RM) *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp |
-$(RM) *.ncl *.ngm *.prm *_pad.txt *.twx *.log *.syr *.par *.exo *.xpi |
-$(RM) *.cmd_log *.ngr *.bld *_summary.html *.nc1 *.pcf *.bgn |
-$(RM) *.pad *.placed_ncd_tracker *.routed_ncd_tracker *_pad.csv *.drc |
/my_system09.xst
0,0 → 1,53
set -tmpdir "./xst/projnav.tmp" |
set -xsthdpdir "./xst" |
run |
-ifn my_system09.prj |
-ifmt mixed |
-ofn my_system09 |
-ofmt NGC |
-p xc3s200-5-ft256 |
-top my_system09 |
-opt_mode Speed |
-opt_level 1 |
-iuc NO |
-lso my_system09.lso |
-keep_hierarchy NO |
-rtlview Yes |
-glob_opt AllClockNets |
-read_cores YES |
-write_timing_constraints NO |
-cross_clock_analysis NO |
-hierarchy_separator / |
-bus_delimiter <> |
-case maintain |
-slice_utilization_ratio 100 |
-verilog2001 YES |
-fsm_extract YES -fsm_encoding Auto |
-safe_implementation No |
-fsm_style lut |
-ram_extract Yes |
-ram_style Distributed |
-rom_extract Yes |
-mux_style Auto |
-decoder_extract YES |
-priority_extract YES |
-shreg_extract YES |
-shift_extract YES |
-xor_collapse YES |
-rom_style Distributed |
-mux_extract YES |
-resource_sharing YES |
-mult_style auto |
-iobuf YES |
-max_fanout 500 |
-bufg 8 |
-register_duplication YES |
-register_balancing No |
-slice_packing YES |
-optimize_primitives NO |
-use_clock_enable Yes |
-use_sync_set Yes |
-use_sync_reset Yes |
-iob auto |
-equivalent_register_removal YES |
-slice_utilization_ratio_maxmargin 5 |
/my_system09.ise
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
my_system09.ise
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: my_system09.ut
===================================================================
--- my_system09.ut (nonexistent)
+++ my_system09.ut (revision 99)
@@ -0,0 +1,29 @@
+-m
+-w
+-g DebugBitstream:No
+-g Binary:no
+-g CRC:Enable
+-g ConfigRate:6
+-g CclkPin:PullUp
+-g M0Pin:PullUp
+-g M1Pin:PullUp
+-g M2Pin:PullUp
+-g ProgPin:PullUp
+-g DonePin:PullUp
+-g TckPin:PullUp
+-g TdiPin:PullUp
+-g TdoPin:PullUp
+-g TmsPin:PullUp
+-g UnusedPin:PullDown
+-g UserID:0xFFFFFFFF
+-g DCMShutdown:Disable
+-g DCIUpdateMode:AsRequired
+-g StartUpClk:CClk
+-g DONE_cycle:4
+-g GTS_cycle:5
+-g GWE_cycle:6
+-g LCK_cycle:NoWait
+-g Match_cycle:Auto
+-g Security:None
+-g DonePipe:No
+-g DriveDone:No
Index: my_system09.lso
===================================================================
--- my_system09.lso (nonexistent)
+++ my_system09.lso (revision 99)
@@ -0,0 +1 @@
+work