URL
https://opencores.org/ocsvn/ecg/ecg/trunk
Subversion Repositories ecg
Compare Revisions
- This comparison shows the changes necessary to convert path
/ecg
- from Rev 7 to Rev 8
- ↔ Reverse comparison
Rev 7 → Rev 8
/trunk/synthesis/result.xls
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
trunk/synthesis/result.xls
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: trunk/synthesis/xilinx/constraints.ucf
===================================================================
--- trunk/synthesis/xilinx/constraints.ucf (nonexistent)
+++ trunk/synthesis/xilinx/constraints.ucf (revision 8)
@@ -0,0 +1,4 @@
+
+#Created by Constraints Editor (xc4vlx200-ff1513-11) - 2012/01/16
+NET "clk" TNM_NET = clk;
+TIMESPEC TS_clk = PERIOD "clk" 10 ns HIGH 50%;
Index: trunk/synthesis/xilinx/point_scalar_mult.prj
===================================================================
--- trunk/synthesis/xilinx/point_scalar_mult.prj (nonexistent)
+++ trunk/synthesis/xilinx/point_scalar_mult.prj (revision 8)
@@ -0,0 +1,4 @@
+verilog work "rtl/fun.v"
+verilog work "rtl/f3.v"
+verilog work "rtl/f3m.v"
+verilog work "rtl/ecg.v"
Index: trunk/synthesis/xilinx/point_add.prj
===================================================================
--- trunk/synthesis/xilinx/point_add.prj (nonexistent)
+++ trunk/synthesis/xilinx/point_add.prj (revision 8)
@@ -0,0 +1,4 @@
+verilog work "rtl/fun.v"
+verilog work "rtl/f3.v"
+verilog work "rtl/f3m.v"
+verilog work "rtl/ecg.v"
Index: trunk/synthesis/xilinx/point_scalar_mult.xst
===================================================================
--- trunk/synthesis/xilinx/point_scalar_mult.xst (nonexistent)
+++ trunk/synthesis/xilinx/point_scalar_mult.xst (revision 8)
@@ -0,0 +1,59 @@
+set -tmpdir "xst/projnav.tmp"
+set -xsthdpdir "xst"
+run
+-ifn point_scalar_mult.prj
+-ifmt mixed
+-ofn point_scalar_mult
+-ofmt NGC
+-p xc4vlx200-11-ff1513
+-top point_scalar_mult
+-opt_mode Speed
+-opt_level 1
+-power NO
+-iuc NO
+-keep_hierarchy No
+-netlist_hierarchy As_Optimized
+-rtlview Yes
+-glob_opt AllClockNets
+-read_cores YES
+-write_timing_constraints NO
+-cross_clock_analysis NO
+-hierarchy_separator /
+-bus_delimiter <>
+-case Maintain
+-slice_utilization_ratio 100
+-bram_utilization_ratio 100
+-dsp_utilization_ratio 100
+-verilog2001 YES
+-fsm_extract YES -fsm_encoding Auto
+-safe_implementation No
+-fsm_style LUT
+-ram_extract Yes
+-ram_style Auto
+-rom_extract Yes
+-mux_style Auto
+-decoder_extract YES
+-priority_extract Yes
+-shreg_extract YES
+-shift_extract YES
+-xor_collapse YES
+-rom_style Auto
+-auto_bram_packing NO
+-mux_extract Yes
+-resource_sharing YES
+-async_to_sync NO
+-use_dsp48 Auto
+-iobuf YES
+-max_fanout 100000
+-bufg 32
+-bufr 48
+-register_duplication YES
+-register_balancing No
+-slice_packing YES
+-optimize_primitives NO
+-use_clock_enable Auto
+-use_sync_set Auto
+-use_sync_reset Auto
+-iob Auto
+-equivalent_register_removal YES
+-slice_utilization_ratio_maxmargin 5
Index: trunk/synthesis/xilinx/point_add.xst
===================================================================
--- trunk/synthesis/xilinx/point_add.xst (nonexistent)
+++ trunk/synthesis/xilinx/point_add.xst (revision 8)
@@ -0,0 +1,59 @@
+set -tmpdir "xst/projnav.tmp"
+set -xsthdpdir "xst"
+run
+-ifn point_add.prj
+-ifmt mixed
+-ofn point_add
+-ofmt NGC
+-p xc4vlx200-11-ff1513
+-top point_add
+-opt_mode Speed
+-opt_level 1
+-power NO
+-iuc NO
+-keep_hierarchy No
+-netlist_hierarchy As_Optimized
+-rtlview Yes
+-glob_opt AllClockNets
+-read_cores YES
+-write_timing_constraints NO
+-cross_clock_analysis NO
+-hierarchy_separator /
+-bus_delimiter <>
+-case Maintain
+-slice_utilization_ratio 100
+-bram_utilization_ratio 100
+-dsp_utilization_ratio 100
+-verilog2001 YES
+-fsm_extract YES -fsm_encoding Auto
+-safe_implementation No
+-fsm_style LUT
+-ram_extract Yes
+-ram_style Auto
+-rom_extract Yes
+-mux_style Auto
+-decoder_extract YES
+-priority_extract Yes
+-shreg_extract YES
+-shift_extract YES
+-xor_collapse YES
+-rom_style Auto
+-auto_bram_packing NO
+-mux_extract Yes
+-resource_sharing YES
+-async_to_sync NO
+-use_dsp48 Auto
+-iobuf YES
+-max_fanout 100000
+-bufg 32
+-bufr 48
+-register_duplication YES
+-register_balancing No
+-slice_packing YES
+-optimize_primitives NO
+-use_clock_enable Auto
+-use_sync_set Auto
+-use_sync_reset Auto
+-iob Auto
+-equivalent_register_removal YES
+-slice_utilization_ratio_maxmargin 5