Subversion Repositories ethmac

/run/tb_eth.do File deleted

/run/dir.keeper Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream

/run/dir.keeper

run/dir.keeper Property changes : Deleted: svn:mime-type ## -1 +0,0 ## -application/octet-stream \ No newline at end of property Index: bin/eth_wave.do =================================================================== --- bin/eth_wave.do (revision 338) +++ bin/eth_wave.do (nonexistent) @@ -1,138 +0,0 @@ -onerror {resume} -quietly WaveActivateNextPane {} 0 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wb_clk -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wb_rst -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wb_int -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/mtx_clk -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/mrx_clk -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MTxD -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MTxEn -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MTxErr -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MRxD -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MRxDV -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MRxErr -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MColl -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/MCrs -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/Mdi_I -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/Mdo_O -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/Mdo_OE -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/Mdio_IO -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/Mdc_O -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_adr -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_adr_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_dat_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_dat_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_sel_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_we_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_cyc_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_stb_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_ack_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_sl_wb_err_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_adr_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_dat_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_dat_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_sel_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_we_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_cyc_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_stb_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_ack_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_ma_wb_err_i -add wave -noupdate -format Logic -radix ascii /tb_ethernet/test_name -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wbm_init_waits -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wbm_subseq_waits -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wbs_waits -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wbs_retries - -add wave -noupdate -format Logic -radix hex /tb_ethernet/eth_top/wishbone/* -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_receive/i_length -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_receive/num_of_bd -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/max_tmp -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/min_tmp -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/i_length -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/num_of_frames -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/num_of_bd -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wb_slave/calc_ack -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/wb_slave/a_e_r_resp -add wave -noupdate -format Logic -radix decimal /tb_ethernet/test_mac_full_duplex_transmit/frame_ended - -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/m_rst_n_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mtx_clk_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mtxd_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mtxen_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mtxerr_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mrx_clk_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mrxd_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mrxdv_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mrxerr_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mcoll_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mcrs_o -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mdc_i -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_io -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/phy_log -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/control_bit15 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/control_bit14_10 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/control_bit9 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/control_bit8_0 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/status_bit15_9 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/status_bit8 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/status_bit7 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/status_bit6_0 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/phy_id1 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/phy_id2 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/rx_link_down_halfperiod -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/eth_speed -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/respond_to_all_phy_addr -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/no_preamble -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_transfer_cnt -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_transfer_cnt_reset -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_io_reg -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_io_output -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_io_rd_wr -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_io_enable -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/phy_address -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/reg_address -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_get_phy_address -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_get_reg_address -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/reg_data_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_get_reg_data_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_put_reg_data_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/reg_data_out -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/md_put_reg_data_out -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/register_bus_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/register_bus_out -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/registers_addr_data_test_operation -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/self_clear_d0 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/self_clear_d1 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/self_clear_d2 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/self_clear_d3 -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mcrs_rx -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mcrs_tx -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/mtxen_d -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/task_mcoll -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/task_mcrs -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/task_mcrs_lost -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/no_collision_in_half_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/collision_in_full_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/no_carrier_sense_in_tx_half_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/no_carrier_sense_in_rx_half_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/carrier_sense_in_tx_full_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/no_carrier_sense_in_rx_full_duplex -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/real_carrier_sense -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_mem_addr_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_mem_data_in -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_cnt -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_preamble_ok -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_sfd_ok -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_byte_aligned_ok -add wave -noupdate -format Logic -radix hexadecimal /tb_ethernet/eth_phy/tx_len -TreeUpdate [SetDefaultTree] -WaveRestoreCursors {476613 ns} -WaveRestoreZoom {476105 ns} {478586 ns} -configure wave -namecolwidth 280 -configure wave -valuecolwidth 68 -configure wave -justifyvalue left -configure wave -signalnamewidth 0 -configure wave -snapdistance 10 -configure wave -datasetprefix 0 -configure wave -rowmargin 4 -configure wave -childrowmargin 2 Index: bin/work/_info =================================================================== --- bin/work/_info (revision 338) +++ bin/work/_info (nonexistent) @@ -1,4 +0,0 @@ -m255 -o -cModel Technology -dC:\Modeltech_5.6a\examples Index: bin/work/dir.keeper =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: bin/work/dir.keeper =================================================================== --- bin/work/dir.keeper (revision 338) +++ bin/work/dir.keeper (nonexistent)

bin/work/dir.keeper Property changes : Deleted: svn:mime-type ## -1 +0,0 ## -application/octet-stream \ No newline at end of property Index: bin/ethernet.mpf =================================================================== --- bin/ethernet.mpf (revision 338) +++ bin/ethernet.mpf (nonexistent) @@ -1,406 +0,0 @@ -[Library] -std = $MODEL_TECH/../std -ieee = $MODEL_TECH/../ieee -verilog = $MODEL_TECH/../verilog -vital2000 = $MODEL_TECH/../vital2000 -std_developerskit = $MODEL_TECH/../std_developerskit -synopsys = $MODEL_TECH/../synopsys -modelsim_lib = $MODEL_TECH/../modelsim_lib - -work = work -[vcom] -; Turn on VHDL-1993 as the default. Default is off (VHDL-1987). -; VHDL93 = 1 - -; Show source line containing error. Default is off. -; Show_source = 1 - -; Turn off unbound-component warnings. Default is on. -; Show_Warning1 = 0 - -; Turn off process-without-a-wait-statement warnings. Default is on. -; Show_Warning2 = 0 - -; Turn off null-range warnings. Default is on. -; Show_Warning3 = 0 - -; Turn off no-space-in-time-literal warnings. Default is on. -; Show_Warning4 = 0 - -; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on. -; Show_Warning5 = 0 - -; Turn off optimization for IEEE std_logic_1164 package. Default is on. -; Optimize_1164 = 0 - -; Turn on resolving of ambiguous function overloading in favor of the -; "explicit" function declaration (not the one automatically created by -; the compiler for each type declaration). Default is off. -; The .ini file has Explict enabled so that std_logic_signed/unsigned -; will match the behavior of synthesis tools. -Explicit = 1 - -; Turn off acceleration of the VITAL packages. Default is to accelerate. -; NoVital = 1 - -; Turn off VITAL compliance checking. Default is checking on. -; NoVitalCheck = 1 - -; Ignore VITAL compliance checking errors. Default is to not ignore. -; IgnoreVitalErrors = 1 - -; Turn off VITAL compliance checking warnings. Default is to show warnings. -; Show_VitalChecksWarnings = false - -; Keep silent about case statement static warnings. -; Default is to give a warning. -; NoCaseStaticError = 1 - -; Keep silent about warnings caused by aggregates that are not locally static. -; Default is to give a warning. -; NoOthersStaticError = 1 - -; Treat as errors: -; case statement static warnings -; warnings caused by aggregates that are not locally static -; Overrides NoCaseStaticError, NoOthersStaticError settings. -; PedanticErrors = 1 - -; Turn off inclusion of debugging info within design units. -; Default is to include debugging info. -; NoDebug = 1 - -; Turn off "loading..." messages. Default is messages on. -; Quiet = 1 - -; Turn on some limited synthesis rule compliance checking. Checks only: -; -- signals used (read) by a process must be in the sensitivity list -; CheckSynthesis = 1 - -; Activate optimizations on expressions that do not involve signals, -; waits, or function/procedure/task invocations. Default is off. -; ScalarOpts = 1 - -; Require the user to specify a configuration for all bindings, -; and do not generate a compile time default binding for the -; component. This will result in an elaboration error of -; 'component not bound' if the user fails to do so. Avoids the rare -; issue of a false dependency upon the unused default binding. -; RequireConfigForAllDefaultBinding = 1 - -; Inhibit range checking on subscripts of arrays. Range checking on -; scalars defined with subtypes is inhibited by default. -; NoIndexCheck = 1 - -; Inhibit range checks on all (implicit and explicit) assignments to -; scalar objects defined with subtypes. -; NoRangeCheck = 1 - -VHDL93 = 0 -NoDebug = 0 -CheckSynthesis = 0 -NoVitalCheck = 0 -Optimize_1164 = 1 -NoVital = 0 -Quiet = 0 -Show_source = 0 -Show_Warning1 = 1 -Show_Warning2 = 1 -Show_Warning3 = 1 -Show_Warning4 = 1 -Show_Warning5 = 1 -[vlog] - -; Turn off inclusion of debugging info within design units. -; Default is to include debugging info. -; NoDebug = 1 - -; Turn off "loading..." messages. Default is messages on. -; Quiet = 1 - -; Turn on Verilog hazard checking (order-dependent accessing of global vars). -; Default is off. -; Hazard = 1 - -; Turn on converting regular Verilog identifiers to uppercase. Allows case -; insensitivity for module names. Default is no conversion. -; UpCase = 1 - -; Turn on incremental compilation of modules. Default is off. -; Incremental = 1 - -; Activate optimizations on expressions that do not involve signals, -; waits, or function/procedure/task invocations. Default is off. -; ScalarOpts = 1 - -; Turns on lint-style checking. -; Show_Lint = 1 - -; Show source line containing error. Default is off. -; Show_source = 1 - -Quiet = 0 -Show_source = 0 -NoDebug = 0 -Hazard = 0 -UpCase = 0 -OptionFile = ../../../../sim/rtl_sim/modelsim_sim/bin/vlog.opt -[vsim] -; Simulator resolution -; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100. -resolution = 1ns - -; User time unit for run commands -; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the -; unit specified for Resolution. For example, if Resolution is 100ps, -; then UserTimeUnit defaults to ps. -UserTimeUnit = ns - -; Default run length -RunLength = 100 - -; Maximum iterations that can be run without advancing simulation time -IterationLimit = 5000 - -; Directives to license manager can be set either as single value or as -; space separated multi-values: -; vhdl Immediately reserve a VHDL license -; vlog Immediately reserve a Verilog license -; plus Immediately reserve a VHDL and Verilog license -; nomgc Do not look for Mentor Graphics Licenses -; nomti Do not look for Model Technology Licenses -; noqueue Do not wait in the license queue when a license is not available -; viewsim Try for viewer license but accept simulator license(s) instead -; of queuing for viewer license (PE ONLY) -; Single value: -; License = plus -; Multi-value: -; License = noqueue plus - -; Stop the simulator after an assertion message -; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal -BreakOnAssertion = 3 - -; Assertion Message Format -; %S - Severity Level -; %R - Report Message -; %T - Time of assertion -; %D - Delta -; %I - Instance or Region pathname (if available) -; %% - print '%' character -; AssertionFormat = "** %S: %R\n Time: %T Iteration: %D%I\n" - -; Assertion File - alternate file for storing assertion messages -; AssertFile = assert.log - -; Default radix for all windows and commands... -; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned -DefaultRadix = symbolic - -; VSIM Startup command -; Startup = do startup.do - -; File for saving command transcript -TranscriptFile = transcript - -; File for saving command history -; CommandHistory = cmdhist.log - -; Specify whether paths in simulator commands should be described -; in VHDL or Verilog format. For VHDL, PathSeparator = / -; for Verilog, PathSeparator = . -PathSeparator = / - -; Specify the dataset separator for fully rooted contexts. -; The default is ':'. For example, sim:/top -; Must not be the same character as PathSeparator. -DatasetSeparator = : - -; Disable assertion messages -; IgnoreNote = 1 -; IgnoreWarning = 1 -; IgnoreError = 1 -; IgnoreFailure = 1 - -; Default force kind. May be freeze, drive, or deposit -; or in other terms, fixed, wired, or charged. -; DefaultForceKind = freeze - -; If zero, open files when elaborated; otherwise, open files on -; first read or write. Default is 0. -; DelayFileOpen = 1 - -; Control VHDL files opened for write -; 0 = Buffered, 1 = Unbuffered -UnbufferedOutput = 0 - -; Control number of VHDL files open concurrently -; This number should always be less than the -; current ulimit setting for max file descriptors. -; 0 = unlimited -ConcurrentFileLimit = 40 - -; Controls the number of hierarchical regions displayed as -; part of a signal name shown in the waveform window. The default -; value or a value of zero tells VSIM to display the full name. -; WaveSignalNameWidth = 0 - -; Turn off warnings from the std_logic_arith, std_logic_unsigned -; and std_logic_signed packages. -; StdArithNoWarnings = 1 - -; Turn off warnings from the IEEE numeric_std and numeric_bit packages. -; NumericStdNoWarnings = 1 - -; Control the format of a generate statement label. Do not quote it. -; GenerateFormat = %s__%d - -; Specify whether checkpoint files should be compressed. -; The default is to be compressed. -; CheckpointCompressMode = 0 - -; List of dynamically loaded objects for Verilog PLI applications -; Veriuser = veriuser.sl - -; Specify default options for the restart command. Options can be one -; or more of: -force -nobreakpoint -nolist -nolog -nowave -; DefaultRestartOptions = -force - -; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs -; (> 500 megabyte memory footprint). Default is disabled. -; Specify number of megabytes to lock. -; LockedMemory = 1000 - -; Turn on (1) or off (0) WLF file compression. -; The default is 1; compress WLF file. -; WLFCompress = 0 - -; Specify whether to save all design hierarchy (1) in WLF file -; or only regions containing logged signals (0). -; The default is 0; log only regions with logged signals. -; WLFSaveAllRegions = 1 - -; WLF file time limit. Limit WLF file by time, as closely as possible, -; to the specified amount of simulation time. When the limit is exceeded -; the earliest times get truncated from the file. -; If both time and size limits are specified the most restrictive is used. -; UserTimeUnits are used if time units are not specified. -; The default is 0; no limit. Example: WLFTimeLimit = {100 ms} -; WLFTimeLimit = 0 - -; WLF file size limit. Limit WLF file size, as closely as possible, -; to the specified number of megabytes. If both time and size limits -; are specified then the most restrictive is used. -; The default is 0; no limit. -; WLFSizeLimit = 1000 - -; Specify whether or not a WLF file should be deleted when the -; simulation ends. A value of 1 will cause the WLF file to be deleted. -; The default is 0; do not delete WLF file when simulation ends. -; WLFDeleteOnQuit = 1 - -[lmc] -; ModelSim's interface to Logic Modeling's SmartModel SWIFT software -libsm = $MODEL_TECH/libsm.sl -; ModelSim's interface to Logic Modeling's SmartModel SWIFT software (Windows NT) -; libsm = $MODEL_TECH/libsm.dll -; Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700) -; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl -; Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000) -; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o -; Logic Modeling's SmartModel SWIFT software (Sun4 Solaris) -; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so -; Logic Modeling's SmartModel SWIFT software (Windows NT) -; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll -; Logic Modeling's SmartModel SWIFT software (Linux) -; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so - -; ModelSim's interface to Logic Modeling's hardware modeler SFI software -libhm = $MODEL_TECH/libhm.sl -; ModelSim's interface to Logic Modeling's hardware modeler SFI software (Windows NT) -; libhm = $MODEL_TECH/libhm.dll -; Logic Modeling's hardware modeler SFI software (HP 9000 Series 700) -; libsfi = /lib/hp700/libsfi.sl -; Logic Modeling's hardware modeler SFI software (IBM RISC System/6000) -; libsfi = /lib/rs6000/libsfi.a -; Logic Modeling's hardware modeler SFI software (Sun4 Solaris) -; libsfi = /lib/sun4.solaris/libsfi.so -; Logic Modeling's hardware modeler SFI software (Windows NT) -; libsfi = /lib/pcnt/lm_sfi.dll -; Logic Modeling's hardware modeler SFI software (Linux) -; libsfi = /lib/linux/libsfi.so -[Project] -Project_Version = 3 -Project_DefaultLib = work -Project_SortMethod = alpha -Project_Files_Count = 34 -Project_File_0 = ../../../../rtl/verilog/eth_registers.v -Project_File_P_0 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031654124 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 12 dont_compile 0 -Project_File_1 = ../../../../rtl/verilog/eth_crc.v -Project_File_P_1 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 2 dont_compile 0 -Project_File_2 = ../../../../rtl/verilog/eth_random.v -Project_File_P_2 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 9 dont_compile 0 -Project_File_3 = ../../../../bench/verilog/wb_bus_mon.v -Project_File_P_3 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 30 dont_compile 0 -Project_File_4 = ../../../../bench/verilog/tb_ethernet.v -Project_File_P_4 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1032198830 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 29 dont_compile 0 -Project_File_5 = ../../../../rtl/verilog/eth_outputcontrol.v -Project_File_P_5 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1026245520 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 8 dont_compile 0 -Project_File_6 = ../../../../rtl/verilog/eth_transmitcontrol.v -Project_File_P_6 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 20 dont_compile 0 -Project_File_7 = ../../../../rtl/verilog/eth_top.v -Project_File_P_7 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031842218 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 19 dont_compile 0 -Project_File_8 = ../../../../rtl/verilog/eth_rxaddrcheck.v -Project_File_P_8 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031164866 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 13 dont_compile 0 -Project_File_9 = ../../../../bench/verilog/wb_model_defines.v -Project_File_P_9 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 33 dont_compile 0 -Project_File_10 = ../../../../rtl/verilog/eth_receivecontrol.v -Project_File_P_10 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 10 dont_compile 0 -Project_File_11 = ../../../../rtl/verilog/eth_rxethmac.v -Project_File_P_11 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1013843728 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 15 dont_compile 0 -Project_File_12 = ../../../../bench/verilog/eth_phy_defines.v -Project_File_P_12 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 27 dont_compile 0 -Project_File_13 = ../../../../rtl/verilog/eth_miim.v -Project_File_P_13 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1029349930 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 7 dont_compile 0 -Project_File_14 = ../../../../rtl/verilog/eth_rxcounters.v -Project_File_P_14 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1013771610 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 14 dont_compile 0 -Project_File_15 = ../../../../rtl/verilog/eth_register.v -Project_File_P_15 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1029535812 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 11 dont_compile 0 -Project_File_16 = ../../../../bench/verilog/wb_slave_behavioral.v -Project_File_P_16 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 34 dont_compile 0 -Project_File_17 = ../../../../bench/verilog/wb_master_behavioral.v -Project_File_P_17 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 31 dont_compile 0 -Project_File_18 = ../../../../rtl/verilog/eth_txethmac.v -Project_File_P_18 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1014740642 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 22 dont_compile 0 -Project_File_19 = ../../../../rtl/verilog/eth_wishbone.v -Project_File_P_19 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031753926 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 24 dont_compile 0 -Project_File_20 = ../../../../rtl/verilog/eth_txcounters.v -Project_File_P_20 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1019487254 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 21 dont_compile 0 -Project_File_21 = ../../../../bench/verilog/eth_phy.v -Project_File_P_21 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031928616 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 26 dont_compile 0 -Project_File_22 = ../../../../bench/verilog/wb_master32.v -Project_File_P_22 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031920154 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 32 dont_compile 0 -Project_File_23 = ../../../../rtl/verilog/eth_rxstatem.v -Project_File_P_23 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 16 dont_compile 0 -Project_File_24 = ../../../../bench/verilog/tb_eth_defines.v -Project_File_P_24 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031942506 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 28 dont_compile 0 -Project_File_25 = ../../../../rtl/verilog/eth_maccontrol.v -Project_File_P_25 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 5 dont_compile 0 -Project_File_26 = ../../../../rtl/verilog/eth_txstatem.v -Project_File_P_26 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 23 dont_compile 0 -Project_File_27 = ../../../../rtl/verilog/eth_shiftreg.v -Project_File_P_27 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1029349020 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 17 dont_compile 0 -Project_File_28 = ../../../../rtl/verilog/eth_spram_256x32.v -Project_File_P_28 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1027442170 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 18 dont_compile 0 -Project_File_29 = ../../../../rtl/verilog/eth_fifo.v -Project_File_P_29 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1019483152 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 4 dont_compile 0 -Project_File_30 = ../../../../rtl/verilog/eth_macstatus.v -Project_File_P_30 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031842216 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 6 dont_compile 0 -Project_File_31 = ../../../../rtl/verilog/eth_defines.v -Project_File_P_31 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1031164610 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 3 dont_compile 0 -Project_File_32 = ../../../../rtl/verilog/eth_clockgen.v -Project_File_P_32 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 0 dont_compile 0 -Project_File_33 = ../../../../rtl/verilog/timescale.v -Project_File_P_33 = file_type Verilog group_id 0 vlog_nodebug 0 folder {Top Level} vlog_noload 0 last_compile 1011781696 vlog_hazard 0 vlog_showsource 0 ood 0 vlog_options {} vlog_upper 0 compile_to work compile_order 25 dont_compile 0 -Project_Sim_Count = 0 -Project_Folder_Count = 0 Index: bin/do.do =================================================================== --- bin/do.do (revision 338) +++ bin/do.do (nonexistent) @@ -1,48 +0,0 @@ -#///////////////////////////////////////////////////////////////////// -#/// //// -#/// do.do //// -#/// //// -#/// This file is part of the Ethernet IP core project //// -#/// http://www.opencores.org/projects/ethmac/ //// -#/// //// -#/// Author(s): //// -#/// - Igor Mohor (igorM@opencores.org) //// -#/// //// -#/// All additional information is avaliable in the Readme.txt //// -#/// file. //// -#/// //// -#///////////////////////////////////////////////////////////////////// -#/// //// -#/// Copyright (C) 2001, 2002 Authors //// -#/// //// -#/// This source file may be used and distributed without //// -#/// restriction provided that this copyright statement is not //// -#/// removed from the file and that any derivative work contains //// -#/// the original copyright notice and the associated disclaimer. //// -#/// //// -#/// This source file is free software; you can redistribute it //// -#/// and/or modify it under the terms of the GNU Lesser General //// -#/// Public License as published by the Free Software Foundation; //// -#/// either version 2.1 of the License, or (at your option) any //// -#/// later version. //// -#/// //// -#/// This source is distributed in the hope that it will be //// -#/// useful, but WITHOUT ANY WARRANTY; without even the implied //// -#/// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// -#/// PURPOSE. See the GNU Lesser General Public License for more //// -#/// details. //// -#/// //// -#/// You should have received a copy of the GNU Lesser General //// -#/// Public License along with this source; if not, download it //// -#/// from http://www.opencores.org/lgpl.shtml //// -#/// //// -#///////////////////////////////////////////////////////////////////// -#/ -#/ CVS Revision History -#/ -#/ $Log: not supported by cvs2svn $ -#/ -#/ -#/ - -do ../run/tb_eth.do Index: bin/vlog.opt =================================================================== --- bin/vlog.opt (revision 338) +++ bin/vlog.opt (nonexistent) @@ -1,2 +0,0 @@ -+incdir+../../../../bench/verilog -+incdir+../../../../rtl/verilog Index: log/dir.keeper =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: log/dir.keeper =================================================================== --- log/dir.keeper (revision 338) +++ log/dir.keeper (nonexistent)

log/dir.keeper Property changes : Deleted: svn:mime-type ## -1 +0,0 ## -application/octet-stream \ No newline at end of property Index: out/dir.keeper =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: out/dir.keeper =================================================================== --- out/dir.keeper (revision 338) +++ out/dir.keeper (nonexistent)

out/dir.keeper Property changes : Deleted: svn:mime-type ## -1 +0,0 ## -application/octet-stream \ No newline at end of property