URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 113 to Rev 112
- ↔ Reverse comparison
Rev 113 → Rev 112
/minsoc/branches/rc-1.0/utils/setup/minsoc-configure.sh
6,8 → 6,7
# ===== CONFIGURATIONS ===== |
# ========================== |
|
SCRIPT_DIR="$( cd -P "$( dirname "$0" )" && pwd )" |
export DIR_TO_INSTALL=`pwd`/../../../ |
export DIR_TO_INSTALL=`pwd` |
# Debug ? |
export DEBUG=0; |
. beautify.sh |
71,4 → 70,4
errormsg "Directory doesn't exist. Please create it"; |
fi; |
|
bash ${SCRIPT_DIR}/configure.sh |
bash configure.sh |
/minsoc/branches/rc-1.0/utils/setup/minsoc-install.sh
6,7 → 6,6
# ===== CONFIGURATIONS ===== |
# ========================== |
MINSOC_SVN_URL=http://opencores.org/ocsvn/minsoc/minsoc/branches/rc-1.0 |
SCRIPT_DIR="$( cd -P "$( dirname "$0" )" && pwd )" |
export DIR_TO_INSTALL=`pwd` |
|
# Debug ? |
227,7 → 226,7
|
|
#Configuring MinSoC, Advanced Debug System and patching OpenRISC |
bash ${SCRIPT_DIR}/configure.sh |
bash configure.sh |
|
|
#Setting-up new variables |
/minsoc/branches/rc-1.0/utils/setup/configure.sh
19,8 → 19,7
|
#Patching OpenRISC Release 1 with Advanced Debug System patch for Watchpoints |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/or1200/rtl/verilog" |
cecho "Patching OpenRISC for watchpoint support" |
patch -p0 < ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Patches/OR1200v1/or1200v1_hwbkpt.patch |
execcmd "Patching OpenRISC for watchpoint support" "patch -p0 < ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Patches/OR1200v1/or1200v1_hwbkpt.patch" |
|
|
#Precompiling firmwares |
/minsoc/branches/rc-1.0/backend/spartan3e_starter_kit/or1200_defines.v
3,10 → 3,10
//// OR1200's definitions //// |
//// //// |
//// This file is part of the OpenRISC 1200 project //// |
//// http://www.opencores.org/cores/or1k/ //// |
//// http://opencores.org/project,or1k //// |
//// //// |
//// Description //// |
//// Parameters of the OR1200 core //// |
//// Defines for the OR1200 core //// |
//// //// |
//// To Do: //// |
//// - add parameters that are missing //// |
41,211 → 41,10
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.44 2005/10/19 11:37:56 jcastillo |
// Added support for RAMB16 Xilinx4/Spartan3 primitives |
// |
// Revision 1.43 2005/01/07 09:23:39 andreje |
// l.ff1 and l.cmov instructions added |
// |
// Revision 1.42 2004/06/08 18:17:36 lampret |
// Non-functional changes. Coding style fixes. |
// |
// Revision 1.41 2004/05/09 20:03:20 lampret |
// By default l.cust5 insns are disabled |
// |
// Revision 1.40 2004/05/09 19:49:04 lampret |
// Added some l.cust5 custom instructions as example |
// |
// Revision 1.39 2004/04/08 11:00:46 simont |
// Add support for 512B instruction cache. |
// |
// Revision 1.38 2004/04/05 08:29:57 lampret |
// Merged branch_qmem into main tree. |
// |
// Revision 1.35.4.6 2004/02/11 01:40:11 lampret |
// preliminary HW breakpoints support in debug unit (by default disabled). To enable define OR1200_DU_HWBKPTS. |
// |
// Revision 1.35.4.5 2004/01/15 06:46:38 markom |
// interface to debug changed; no more opselect; stb-ack protocol |
// |
// Revision 1.35.4.4 2004/01/11 22:45:46 andreje |
// Separate instruction and data QMEM decoders, QMEM acknowledge and byte-select added |
// |
// Revision 1.35.4.3 2003/12/17 13:43:38 simons |
// Exception prefix configuration changed. |
// |
// Revision 1.35.4.2 2003/12/05 00:05:03 lampret |
// Static exception prefix. |
// |
// Revision 1.35.4.1 2003/07/08 15:36:37 lampret |
// Added embedded memory QMEM. |
// |
// Revision 1.35 2003/04/24 00:16:07 lampret |
// No functional changes. Added defines to disable implementation of multiplier/MAC |
// |
// Revision 1.34 2003/04/20 22:23:57 lampret |
// No functional change. Only added customization for exception vectors. |
// |
// Revision 1.33 2003/04/07 20:56:07 lampret |
// Fixed OR1200_CLKDIV_x_SUPPORTED defines. Better description. |
// |
// Revision 1.32 2003/04/07 01:26:57 lampret |
// RFRAM defines comments updated. Altera LPM option added. |
// |
// Revision 1.31 2002/12/08 08:57:56 lampret |
// Added optional support for WB B3 specification (xwb_cti_o, xwb_bte_o). Made xwb_cab_o optional. |
// |
// Revision 1.30 2002/10/28 15:09:22 mohor |
// Previous check-in was done by mistake. |
// |
// Revision 1.29 2002/10/28 15:03:50 mohor |
// Signal scanb_sen renamed to scanb_en. |
// |
// Revision 1.28 2002/10/17 20:04:40 lampret |
// Added BIST scan. Special VS RAMs need to be used to implement BIST. |
// |
// Revision 1.27 2002/09/16 03:13:23 lampret |
// Removed obsolete comment. |
// |
// Revision 1.26 2002/09/08 05:52:16 lampret |
// Added optional l.div/l.divu insns. By default they are disabled. |
// |
// Revision 1.25 2002/09/07 19:16:10 lampret |
// If SR[CY] implemented with OR1200_IMPL_ADDC enabled, l.add/l.addi also set SR[CY]. |
// |
// Revision 1.24 2002/09/07 05:42:02 lampret |
// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS. |
// |
// Revision 1.23 2002/09/04 00:50:34 lampret |
// Now most of the configuration registers are updatded automatically based on defines in or1200_defines.v. |
// |
// Revision 1.22 2002/09/03 22:28:21 lampret |
// As per Taylor Su suggestion all case blocks are full case by default and optionally (OR1200_CASE_DEFAULT) can be disabled to increase clock frequncy. |
// |
// Revision 1.21 2002/08/22 02:18:55 lampret |
// Store buffer has been tested and it works. BY default it is still disabled until uClinux confirms correct operation on FPGA board. |
// |
// Revision 1.20 2002/08/18 21:59:45 lampret |
// Disable SB until it is tested |
// |
// Revision 1.19 2002/08/18 19:53:08 lampret |
// Added store buffer. |
// |
// Revision 1.18 2002/08/15 06:04:11 lampret |
// Fixed Xilinx trace buffer address. REported by Taylor Su. |
// |
// Revision 1.17 2002/08/12 05:31:44 lampret |
// Added OR1200_WB_RETRY. Moved WB registered outsputs / samples inputs into lower section. |
// |
// Revision 1.16 2002/07/14 22:17:17 lampret |
// Added simple trace buffer [only for Xilinx Virtex target]. Fixed instruction fetch abort when new exception is recognized. |
// |
// Revision 1.15 2002/06/08 16:20:21 lampret |
// Added defines for enabling generic FF based memory macro for register file. |
// |
// Revision 1.14 2002/03/29 16:24:06 lampret |
// Changed comment about synopsys to _synopsys_ because synthesis was complaining about unknown directives |
// |
// Revision 1.13 2002/03/29 15:16:55 lampret |
// Some of the warnings fixed. |
// |
// Revision 1.12 2002/03/28 19:25:42 lampret |
// Added second type of Virtual Silicon two-port SRAM (for register file). Changed defines for VS STP RAMs. |
// |
// Revision 1.11 2002/03/28 19:13:17 lampret |
// Updated defines. |
// |
// Revision 1.10 2002/03/14 00:30:24 lampret |
// Added alternative for critical path in DU. |
// |
// Revision 1.9 2002/03/11 01:26:26 lampret |
// Fixed async loop. Changed multiplier type for ASIC. |
// |
// Revision 1.8 2002/02/11 04:33:17 lampret |
// Speed optimizations (removed duplicate _cyc_ and _stb_). Fixed D/IMMU cache-inhibit attr. |
// |
// Revision 1.7 2002/02/01 19:56:54 lampret |
// Fixed combinational loops. |
// |
// Revision 1.6 2002/01/19 14:10:22 lampret |
// Fixed OR1200_XILINX_RAM32X1D. |
// |
// Revision 1.5 2002/01/18 07:56:00 lampret |
// No more low/high priority interrupts (PICPR removed). Added tick timer exception. Added exception prefix (SR[EPH]). Fixed single-step bug whenreading NPC. |
// |
// Revision 1.4 2002/01/14 09:44:12 lampret |
// Default ASIC configuration does not sample WB inputs. |
// |
// Revision 1.3 2002/01/08 00:51:08 lampret |
// Fixed typo. OR1200_REGISTERED_OUTPUTS was not defined. Should be. |
// |
// Revision 1.2 2002/01/03 21:23:03 lampret |
// Uncommented OR1200_REGISTERED_OUTPUTS for FPGA target. |
// |
// Revision 1.1 2002/01/03 08:16:15 lampret |
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. |
// |
// Revision 1.20 2001/12/04 05:02:36 lampret |
// Added OR1200_GENERIC_MULTP2_32X32 and OR1200_ASIC_MULTP2_32X32 |
// |
// Revision 1.19 2001/11/27 19:46:57 lampret |
// Now FPGA and ASIC target are separate. |
// |
// Revision 1.18 2001/11/23 21:42:31 simons |
// Program counter divided to PPC and NPC. |
// |
// Revision 1.17 2001/11/23 08:38:51 lampret |
// Changed DSR/DRR behavior and exception detection. |
// |
// Revision 1.16 2001/11/20 21:30:38 lampret |
// Added OR1200_REGISTERED_INPUTS. |
// |
// Revision 1.15 2001/11/19 14:29:48 simons |
// Cashes disabled. |
// |
// Revision 1.14 2001/11/13 10:02:21 lampret |
// Added 'setpc'. Renamed some signals (except_flushpipe into flushpipe etc) |
// |
// Revision 1.13 2001/11/12 01:45:40 lampret |
// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports. |
// |
// Revision 1.12 2001/11/10 03:43:57 lampret |
// Fixed exceptions. |
// |
// Revision 1.11 2001/11/02 18:57:14 lampret |
// Modified virtual silicon instantiations. |
// |
// Revision 1.10 2001/10/21 17:57:16 lampret |
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. |
// |
// Revision 1.9 2001/10/19 23:28:46 lampret |
// Fixed some synthesis warnings. Configured with caches and MMUs. |
// |
// Revision 1.8 2001/10/14 13:12:09 lampret |
// MP3 version. |
// |
// Revision 1.1.1.1 2001/10/06 10:18:36 igorm |
// no message |
// |
// Revision 1.3 2001/08/17 08:01:19 lampret |
// IC enable/disable. |
// |
// Revision 1.2 2001/08/13 03:36:20 lampret |
// Added cfg regs. Moved all defines into one defines.v file. More cleanup. |
// |
// Revision 1.1 2001/08/09 13:39:33 lampret |
// Major clean-up. |
// |
// Revision 1.2 2001/07/22 03:31:54 lampret |
// Fixed RAM's oen bug. Cache bypass under development. |
// |
// Revision 1.1 2001/07/20 00:46:03 lampret |
// Development version of RTL. Libraries are missing. |
// |
// |
// $Log: or1200_defines.v,v $ |
// Revision 2.0 2010/06/30 11:00:00 ORSoC |
// Minor update: |
// Defines added, bugs fixed. |
|
// |
// Dump VCD |
321,10 → 120,13
// Target FPGA memories |
// |
//`define OR1200_ALTERA_LPM |
`define OR1200_XILINX_RAMB16 |
//`define OR1200_XILINX_RAMB16 |
//`define OR1200_XILINX_RAMB4 |
//`define OR1200_XILINX_RAM32X1D |
//`define OR1200_USE_RAM16X1D_FOR_RAM32X1D |
// Generic models should infer RAM blocks at synthesis time (not only effects |
// single port ram.) |
`define OR1200_GENERIC |
|
// |
// Do not implement Data cache |
359,10 → 161,14
// (consider available FPGA memory resources) |
// |
//`define OR1200_IC_1W_512B |
`define OR1200_IC_1W_4KB |
//`define OR1200_IC_1W_8KB |
`define OR1200_DC_1W_4KB |
//`define OR1200_DC_1W_8KB |
//`define OR1200_IC_1W_4KB |
`define OR1200_IC_1W_8KB |
//`define OR1200_IC_1W_16KB |
//`define OR1200_IC_1W_32KB |
//`define OR1200_DC_1W_4KB |
`define OR1200_DC_1W_8KB |
//`define OR1200_DC_1W_16KB |
//`define OR1200_DC_1W_32KB |
|
`endif |
|
373,6 → 179,11
// |
|
// |
// Reset active low |
// |
//`define OR1200_RST_ACT_LOW |
|
// |
// Enable RAM BIST |
// |
// At the moment this only works for Virtual Silicon |
424,7 → 235,7
// |
// To remove *wb_cab_o ports undefine this macro. |
// |
`define OR1200_WB_CAB |
//`define OR1200_WB_CAB |
|
// |
// WISHBONE B3 compatible interface |
436,9 → 247,14
// To enable *wb_cti_o/*wb_bte_o ports, |
// define this macro. |
// |
//`define OR1200_WB_B3 |
`define OR1200_WB_B3 |
|
// |
// LOG all WISHBONE accesses |
// |
`define OR1200_LOG_WB_ACCESS |
|
// |
// Enable additional synthesis directives if using |
// _Synopsys_ synthesis tool |
// |
486,27 → 302,44
`define OR1200_IMPL_ADDC |
|
// |
// Implement l.sub instruction |
// |
// By default implementation of l.sub instructions |
// is enabled to be compliant with the simulator. |
// If you don't use carry bit, then disable |
// implementation to save area. |
// |
`define OR1200_IMPL_SUB |
|
// |
// Implement carry bit SR[CY] |
// |
// |
// By default implementation of SR[CY] is enabled |
// to be compliant with the simulator. However |
// SR[CY] is explicitly only used by l.addc/l.addic |
// instructions and if these two insns are not |
// to be compliant with the simulator. However SR[CY] |
// is explicitly only used by l.addc/l.addic/l.sub |
// instructions and if these three insns are not |
// implemented there is not much point having SR[CY]. |
// |
`define OR1200_IMPL_CY |
|
// |
// Implement optional l.div/l.divu instructions |
// Implement carry bit SR[OV] |
// |
// By default divide instructions are not implemented |
// to save area and increase clock frequency. or32 C/C++ |
// compiler can use soft library for division. |
// Compiler doesn't use this, but other code may like |
// to. |
// |
// To implement divide, multiplier needs to be implemented. |
`define OR1200_IMPL_OV |
|
// |
//`define OR1200_IMPL_DIV |
// Implement carry bit SR[OVE] |
// |
// Overflow interrupt indicator. When enabled, SR[OV] flag |
// does not remain asserted after exception. |
// |
`define OR1200_IMPL_OVE |
|
|
// |
// Implement rotate in the ALU |
// |
526,13 → 359,29
// |
// Type of ALU compare to implement |
// |
// Try either one to find what yields |
// higher clock frequencyin your case. |
// Try to find which synthesizes with |
// most efficient logic use or highest speed. |
// |
//`define OR1200_IMPL_ALU_COMP1 |
`define OR1200_IMPL_ALU_COMP2 |
//`define OR1200_IMPL_ALU_COMP2 |
`define OR1200_IMPL_ALU_COMP3 |
|
// |
// Implement Find First/Last '1' |
// |
`define OR1200_IMPL_ALU_FFL1 |
|
// |
// Implement l.cust5 ALU instruction |
// |
//`define OR1200_IMPL_ALU_CUST5 |
|
// |
// Implement l.extXs and l.extXz instructions |
// |
`define OR1200_IMPL_ALU_EXT |
|
// |
// Implement multiplier |
// |
// By default multiplier is implemented |
543,23 → 392,38
// Implement multiply-and-accumulate |
// |
// By default MAC is implemented. To |
// implement MAC, multiplier needs to be |
// implement MAC, multiplier (non-serial) needs to be |
// implemented. |
// |
`define OR1200_MAC_IMPLEMENTED |
//`define OR1200_MAC_IMPLEMENTED |
|
// |
// Low power, slower multiplier |
// Implement optional l.div/l.divu instructions |
// |
// Select between low-power (larger) multiplier |
// and faster multiplier. The actual difference |
// is only AND logic that prevents distribution |
// of operands into the multiplier when instruction |
// in execution is not multiply instruction |
// By default divide instructions are not implemented |
// to save area. |
// |
//`define OR1200_LOWPWR_MULT |
// |
`define OR1200_DIV_IMPLEMENTED |
|
// |
// Serial multiplier. |
// |
//`define OR1200_MULT_SERIAL |
|
// |
// Serial divider. |
// Uncomment to use a serial divider, otherwise will |
// be a generic parallel implementation. |
// |
`define OR1200_DIV_SERIAL |
|
// |
// Implement HW Single Precision FPU |
// |
//`define OR1200_FPU_IMPLEMENTED |
|
// |
// Clock ratio RISC clock versus WB clock |
// |
// If you plan to run WB:RISC clock fixed to 1:1, disable |
571,7 → 435,7
// For WB:RISC 1:4, 1:2 or 1:1, enable both defines and use |
// clmode to set ratio |
// |
`define OR1200_CLKDIV_2_SUPPORTED |
//`define OR1200_CLKDIV_2_SUPPORTED |
//`define OR1200_CLKDIV_4_SUPPORTED |
|
// |
580,11 → 444,16
// Memory macro w/ two ports (see or1200_tpram_32x32.v) |
//`define OR1200_RFRAM_TWOPORT |
// |
// Memory macro dual port (see or1200_dpram_32x32.v) |
//`define OR1200_RFRAM_DUALPORT |
// Memory macro dual port (see or1200_dpram.v) |
`define OR1200_RFRAM_DUALPORT |
|
// |
// Generic (flip-flop based) register file (see or1200_rfram_generic.v) |
`define OR1200_RFRAM_GENERIC |
//`define OR1200_RFRAM_GENERIC |
// Generic register file supports - 16 registers |
`ifdef OR1200_RFRAM_GENERIC |
// `define OR1200_RFRAM_16REG |
`endif |
|
// |
// Type of mem2reg aligner to implement. |
597,54 → 466,91
//`define OR1200_IMPL_MEM2REG2 |
|
// |
// Reset value and event |
// |
`ifdef OR1200_RST_ACT_LOW |
`define OR1200_RST_VALUE (1'b0) |
`define OR1200_RST_EVENT negedge |
`else |
`define OR1200_RST_VALUE (1'b1) |
`define OR1200_RST_EVENT posedge |
`endif |
|
// |
// ALUOPs |
// |
`define OR1200_ALUOP_WIDTH 4 |
`define OR1200_ALUOP_NOP 4'd4 |
/* Order defined by arith insns that have two source operands both in regs |
(see binutils/include/opcode/or32.h) */ |
`define OR1200_ALUOP_ADD 4'd0 |
`define OR1200_ALUOP_ADDC 4'd1 |
`define OR1200_ALUOP_SUB 4'd2 |
`define OR1200_ALUOP_AND 4'd3 |
`define OR1200_ALUOP_OR 4'd4 |
`define OR1200_ALUOP_XOR 4'd5 |
`define OR1200_ALUOP_MUL 4'd6 |
`define OR1200_ALUOP_CUST5 4'd7 |
`define OR1200_ALUOP_SHROT 4'd8 |
`define OR1200_ALUOP_DIV 4'd9 |
`define OR1200_ALUOP_DIVU 4'd10 |
/* Order not specifically defined. */ |
`define OR1200_ALUOP_IMM 4'd11 |
`define OR1200_ALUOP_MOVHI 4'd12 |
`define OR1200_ALUOP_COMP 4'd13 |
`define OR1200_ALUOP_MTSR 4'd14 |
`define OR1200_ALUOP_MFSR 4'd15 |
`define OR1200_ALUOP_CMOV 4'd14 |
`define OR1200_ALUOP_FF1 4'd15 |
`define OR1200_ALUOP_WIDTH 5 |
`define OR1200_ALUOP_NOP 5'b0_0100 |
/* LS-nibble encodings correspond to bits [3:0] of instruction */ |
`define OR1200_ALUOP_ADD 5'b0_0000 // 0 |
`define OR1200_ALUOP_ADDC 5'b0_0001 // 1 |
`define OR1200_ALUOP_SUB 5'b0_0010 // 2 |
`define OR1200_ALUOP_AND 5'b0_0011 // 3 |
`define OR1200_ALUOP_OR 5'b0_0100 // 4 |
`define OR1200_ALUOP_XOR 5'b0_0101 // 5 |
`define OR1200_ALUOP_MUL 5'b0_0110 // 6 |
`define OR1200_ALUOP_RESERVED 5'b0_0111 // 7 |
`define OR1200_ALUOP_SHROT 5'b0_1000 // 8 |
`define OR1200_ALUOP_DIV 5'b0_1001 // 9 |
`define OR1200_ALUOP_DIVU 5'b0_1010 // a |
`define OR1200_ALUOP_MULU 5'b0_1011 // b |
`define OR1200_ALUOP_EXTHB 5'b0_1100 // c |
`define OR1200_ALUOP_EXTW 5'b0_1101 // d |
`define OR1200_ALUOP_CMOV 5'b0_1110 // e |
`define OR1200_ALUOP_FFL1 5'b0_1111 // f |
|
/* Values sent to ALU from decode unit - not defined by ISA */ |
`define OR1200_ALUOP_COMP 5'b1_0000 // Comparison |
`define OR1200_ALUOP_MOVHI 5'b1_0001 // Move-high |
`define OR1200_ALUOP_CUST5 5'b1_0010 // l.cust5 |
|
// ALU instructions second opcode field |
`define OR1200_ALUOP2_POS 9:6 |
`define OR1200_ALUOP2_WIDTH 4 |
|
// |
// MACOPs |
// |
`define OR1200_MACOP_WIDTH 2 |
`define OR1200_MACOP_NOP 2'b00 |
`define OR1200_MACOP_MAC 2'b01 |
`define OR1200_MACOP_MSB 2'b10 |
`define OR1200_MACOP_WIDTH 3 |
`define OR1200_MACOP_NOP 3'b000 |
`define OR1200_MACOP_MAC 3'b001 |
`define OR1200_MACOP_MSB 3'b010 |
|
// |
// Shift/rotate ops |
// |
`define OR1200_SHROTOP_WIDTH 2 |
`define OR1200_SHROTOP_NOP 2'd0 |
`define OR1200_SHROTOP_SLL 2'd0 |
`define OR1200_SHROTOP_SRL 2'd1 |
`define OR1200_SHROTOP_SRA 2'd2 |
`define OR1200_SHROTOP_ROR 2'd3 |
`define OR1200_SHROTOP_WIDTH 4 |
`define OR1200_SHROTOP_NOP 4'd0 |
`define OR1200_SHROTOP_SLL 4'd0 |
`define OR1200_SHROTOP_SRL 4'd1 |
`define OR1200_SHROTOP_SRA 4'd2 |
`define OR1200_SHROTOP_ROR 4'd3 |
|
// |
// Zero/Sign Extend ops |
// |
`define OR1200_EXTHBOP_WIDTH 4 |
`define OR1200_EXTHBOP_BS 4'h1 |
`define OR1200_EXTHBOP_HS 4'h0 |
`define OR1200_EXTHBOP_BZ 4'h3 |
`define OR1200_EXTHBOP_HZ 4'h2 |
`define OR1200_EXTWOP_WIDTH 4 |
`define OR1200_EXTWOP_WS 4'h0 |
`define OR1200_EXTWOP_WZ 4'h1 |
|
// Execution cycles per instruction |
`define OR1200_MULTICYCLE_WIDTH 2 |
`define OR1200_ONE_CYCLE 2'd0 |
`define OR1200_TWO_CYCLES 2'd1 |
`define OR1200_MULTICYCLE_WIDTH 3 |
`define OR1200_ONE_CYCLE 3'd0 |
`define OR1200_TWO_CYCLES 3'd1 |
|
// Execution control which will "wait on" a module to finish |
`define OR1200_WAIT_ON_WIDTH 2 |
`define OR1200_WAIT_ON_NOTHING `OR1200_WAIT_ON_WIDTH'd0 |
`define OR1200_WAIT_ON_MULTMAC `OR1200_WAIT_ON_WIDTH'd1 |
`define OR1200_WAIT_ON_FPU `OR1200_WAIT_ON_WIDTH'd2 |
`define OR1200_WAIT_ON_MTSPR `OR1200_WAIT_ON_WIDTH'd3 |
|
|
// Operand MUX selects |
`define OR1200_SEL_WIDTH 2 |
`define OR1200_SEL_RF 2'd0 |
678,12 → 584,18
`define OR1200_LSUOP_LHS 4'b0101 |
`define OR1200_LSUOP_LWZ 4'b0110 |
`define OR1200_LSUOP_LWS 4'b0111 |
`define OR1200_LSUOP_LD 4'b0001 |
`define OR1200_LSUOP_SD 4'b1000 |
`define OR1200_LSUOP_SB 4'b1010 |
`define OR1200_LSUOP_SH 4'b1100 |
`define OR1200_LSUOP_SW 4'b1110 |
`define OR1200_LSUOP_LD 4'b0001 |
`define OR1200_LSUOP_SD 4'b1000 |
`define OR1200_LSUOP_SB 4'b1010 |
`define OR1200_LSUOP_SH 4'b1100 |
`define OR1200_LSUOP_SW 4'b1110 |
|
// Number of bits of load/store EA precalculated in ID stage |
// for balancing ID and EX stages. |
// |
// Valid range: 2,3,...,30,31 |
`define OR1200_LSUEA_PRECALC 2 |
|
// FETCHOPs |
`define OR1200_FETCHOP_WIDTH 1 |
`define OR1200_FETCHOP_NOP 1'b0 |
693,13 → 605,15
// Register File Write-Back OPs |
// |
// Bit 0: register file write enable |
// Bits 2-1: write-back mux selects |
`define OR1200_RFWBOP_WIDTH 3 |
`define OR1200_RFWBOP_NOP 3'b000 |
`define OR1200_RFWBOP_ALU 3'b001 |
`define OR1200_RFWBOP_LSU 3'b011 |
`define OR1200_RFWBOP_SPRS 3'b101 |
`define OR1200_RFWBOP_LR 3'b111 |
// Bits 3-1: write-back mux selects |
// |
`define OR1200_RFWBOP_WIDTH 4 |
`define OR1200_RFWBOP_NOP 4'b0000 |
`define OR1200_RFWBOP_ALU 3'b000 |
`define OR1200_RFWBOP_LSU 3'b001 |
`define OR1200_RFWBOP_SPRS 3'b010 |
`define OR1200_RFWBOP_LR 3'b011 |
`define OR1200_RFWBOP_FPU 3'b100 |
|
// Compare instructions |
`define OR1200_COP_SFEQ 3'b000 |
713,6 → 627,33
`define OR1200_COMPOP_WIDTH 4 |
|
// |
// FP OPs |
// |
// MSbit indicates FPU operation valid |
// |
`define OR1200_FPUOP_WIDTH 8 |
// FPU unit from Usselman takes 5 cycles from decode, so 4 ex. cycles |
`define OR1200_FPUOP_CYCLES 3'd4 |
// FP instruction is double precision if bit 4 is set. We're a 32-bit |
// implementation thus do not support double precision FP |
`define OR1200_FPUOP_DOUBLE_BIT 4 |
`define OR1200_FPUOP_ADD 8'b0000_0000 |
`define OR1200_FPUOP_SUB 8'b0000_0001 |
`define OR1200_FPUOP_MUL 8'b0000_0010 |
`define OR1200_FPUOP_DIV 8'b0000_0011 |
`define OR1200_FPUOP_ITOF 8'b0000_0100 |
`define OR1200_FPUOP_FTOI 8'b0000_0101 |
`define OR1200_FPUOP_REM 8'b0000_0110 |
`define OR1200_FPUOP_RESERVED 8'b0000_0111 |
// FP Compare instructions |
`define OR1200_FPCOP_SFEQ 8'b0000_1000 |
`define OR1200_FPCOP_SFNE 8'b0000_1001 |
`define OR1200_FPCOP_SFGT 8'b0000_1010 |
`define OR1200_FPCOP_SFGE 8'b0000_1011 |
`define OR1200_FPCOP_SFLT 8'b0000_1100 |
`define OR1200_FPCOP_SFLE 8'b0000_1101 |
|
// |
// TAGs for instruction bus |
// |
`define OR1200_ITAG_IDLE 4'h0 // idle bus |
740,9 → 681,6
// SHROT_OP position in machine word |
`define OR1200_SHROTOP_POS 7:6 |
|
// ALU instructions multicycle field in machine word |
`define OR1200_ALUMCYC_POS 9:8 |
|
// |
// Instruction opcode groups (basic) |
// |
752,6 → 690,7
`define OR1200_OR32_BF 6'b000100 |
`define OR1200_OR32_NOP 6'b000101 |
`define OR1200_OR32_MOVHI 6'b000110 |
`define OR1200_OR32_MACRC 6'b000110 |
`define OR1200_OR32_XSYNC 6'b001000 |
`define OR1200_OR32_RFE 6'b001001 |
/* */ |
776,6 → 715,7
/* */ |
`define OR1200_OR32_MTSPR 6'b110000 |
`define OR1200_OR32_MACMSB 6'b110001 |
`define OR1200_OR32_FLOAT 6'b110010 |
/* */ |
`define OR1200_OR32_SW 6'b110101 |
`define OR1200_OR32_SB 6'b110110 |
782,9 → 722,8
`define OR1200_OR32_SH 6'b110111 |
`define OR1200_OR32_ALU 6'b111000 |
`define OR1200_OR32_SFXX 6'b111001 |
//`define OR1200_OR32_CUST5 6'b111100 |
`define OR1200_OR32_CUST5 6'b111100 |
|
|
///////////////////////////////////////////////////// |
// |
// Exceptions |
812,9 → 751,9
// |
// Sum of these two defines needs to be 28 |
// |
`define OR1200_EXCEPT_EPH0_P 20'h00000 |
`define OR1200_EXCEPT_EPH1_P 20'hF0000 |
`define OR1200_EXCEPT_V 8'h00 |
`define OR1200_EXCEPT_EPH0_P 20'h00000 |
`define OR1200_EXCEPT_EPH1_P 20'hF0000 |
`define OR1200_EXCEPT_V 8'h00 |
|
// |
// N part width |
829,7 → 768,7
// |
`define OR1200_EXCEPT_UNUSED `OR1200_EXCEPT_WIDTH'hf |
`define OR1200_EXCEPT_TRAP `OR1200_EXCEPT_WIDTH'he |
`define OR1200_EXCEPT_BREAK `OR1200_EXCEPT_WIDTH'hd |
`define OR1200_EXCEPT_FLOAT `OR1200_EXCEPT_WIDTH'hd |
`define OR1200_EXCEPT_SYSCALL `OR1200_EXCEPT_WIDTH'hc |
`define OR1200_EXCEPT_RANGE `OR1200_EXCEPT_WIDTH'hb |
`define OR1200_EXCEPT_ITLBMISS `OR1200_EXCEPT_WIDTH'ha |
870,8 → 809,8
`define OR1200_SPR_GROUP_PM 5'd08 |
`define OR1200_SPR_GROUP_PIC 5'd09 |
`define OR1200_SPR_GROUP_TT 5'd10 |
`define OR1200_SPR_GROUP_FPU 5'd11 |
|
|
///////////////////////////////////////////////////// |
// |
// System group |
885,6 → 824,7
`define OR1200_SPR_NPC 11'd16 |
`define OR1200_SPR_SR 11'd17 |
`define OR1200_SPR_PPC 11'd18 |
`define OR1200_SPR_FPCSR 11'd20 |
`define OR1200_SPR_EPCR 11'd32 |
`define OR1200_SPR_EEAR 11'd48 |
`define OR1200_SPR_ESR 11'd64 |
892,7 → 832,7
// |
// SR bits |
// |
`define OR1200_SR_WIDTH 16 |
`define OR1200_SR_WIDTH 17 |
`define OR1200_SR_SM 0 |
`define OR1200_SR_TEE 1 |
`define OR1200_SR_IEE 2 |
903,12 → 843,13
`define OR1200_SR_LEE 7 |
`define OR1200_SR_CE 8 |
`define OR1200_SR_F 9 |
`define OR1200_SR_CY 10 // Unused |
`define OR1200_SR_OV 11 // Unused |
`define OR1200_SR_OVE 12 // Unused |
`define OR1200_SR_CY 10 // Optional |
`define OR1200_SR_OV 11 // Optional |
`define OR1200_SR_OVE 12 // Optional |
`define OR1200_SR_DSX 13 // Unused |
`define OR1200_SR_EPH 14 |
`define OR1200_SR_FO 15 |
`define OR1200_SR_TED 16 |
`define OR1200_SR_CID 31:28 // Unimplemented |
|
// |
924,6 → 865,24
// |
`define OR1200_SR_EPH_DEF 1'b0 |
|
|
// |
// FPCSR bits |
// |
`define OR1200_FPCSR_WIDTH 12 |
`define OR1200_FPCSR_FPEE 0 |
`define OR1200_FPCSR_RM 2:1 |
`define OR1200_FPCSR_OVF 3 |
`define OR1200_FPCSR_UNF 4 |
`define OR1200_FPCSR_SNF 5 |
`define OR1200_FPCSR_QNF 6 |
`define OR1200_FPCSR_ZF 7 |
`define OR1200_FPCSR_IXF 8 |
`define OR1200_FPCSR_IVF 9 |
`define OR1200_FPCSR_INF 10 |
`define OR1200_FPCSR_DZF 11 |
`define OR1200_FPCSR_RES 31:12 |
|
///////////////////////////////////////////////////// |
// |
// Power Management (PM) |
971,14 → 930,18
// however already enough for use |
// with or32 gdb) |
// |
`define OR1200_DU_HWBKPTS |
//`define OR1200_DU_HWBKPTS |
|
// Number of DVR/DCR pairs if HW breakpoints enabled |
// Comment / uncomment DU_DVRn / DU_DCRn pairs bellow according to this number ! |
// DU_DVR0..DU_DVR7 should be uncommented for 8 DU_DVRDCR_PAIRS |
`define OR1200_DU_DVRDCR_PAIRS 8 |
|
// Define if you want trace buffer |
// (for now only available for Xilinx Virtex FPGAs) |
//`define OR1200_DU_TB_IMPLEMENTED |
|
|
// |
// Address offsets of DU registers inside DU group |
// |
1012,10 → 975,10
`define OR1200_DU_DRR 11'd21 |
`ifdef OR1200_DU_TB_IMPLEMENTED |
`define OR1200_DU_TBADR 11'h0ff |
`define OR1200_DU_TBIA 11'h1xx |
`define OR1200_DU_TBIM 11'h2xx |
`define OR1200_DU_TBAR 11'h3xx |
`define OR1200_DU_TBTS 11'h4xx |
`define OR1200_DU_TBIA 11'h1?? |
`define OR1200_DU_TBIM 11'h2?? |
`define OR1200_DU_TBAR 11'h3?? |
`define OR1200_DU_TBTS 11'h4?? |
`endif |
|
// Position of offset bits inside SPR address |
1038,15 → 1001,17
`define OR1200_DU_DMR1_CW7 15:14 |
`define OR1200_DU_DMR1_CW8 17:16 |
`define OR1200_DU_DMR1_CW9 19:18 |
`define OR1200_DU_DMR1_RES 21:20 |
`define OR1200_DU_DMR1_CW10 21:20 |
`define OR1200_DU_DMR1_ST 22 |
`define OR1200_DU_DMR1_BT 23 |
`define OR1200_DU_DMR1_DXFW 24 |
`define OR1200_DU_DMR1_ETE 25 |
|
// DMR2 bits |
`define OR1200_DU_DMR2_WCE0 0 |
`define OR1200_DU_DMR2_WCE1 1 |
`define OR1200_DU_DMR2_AWTC 11:2 |
`define OR1200_DU_DMR2_WGB 21:12 |
`define OR1200_DU_DMR2_AWTC 12:2 |
`define OR1200_DU_DMR2_WGB 23:13 |
|
// DWCR bits |
`define OR1200_DU_DWCR_COUNT 15:0 |
1066,7 → 1031,7
`define OR1200_DU_DSR_IME 9 |
`define OR1200_DU_DSR_RE 10 |
`define OR1200_DU_DSR_SCE 11 |
`define OR1200_DU_DSR_BE 12 |
`define OR1200_DU_DSR_FPE 12 |
`define OR1200_DU_DSR_TE 13 |
|
// DRR bits |
1082,7 → 1047,7
`define OR1200_DU_DRR_IME 9 |
`define OR1200_DU_DRR_RE 10 |
`define OR1200_DU_DRR_SCE 11 |
`define OR1200_DU_DRR_BE 12 |
`define OR1200_DU_DRR_FPE 12 |
`define OR1200_DU_DRR_TE 13 |
|
// Define if reading DU regs is allowed |
1163,10 → 1128,11
// Shift {MACHI,MACLO} into destination register when executing l.macrc |
// |
// According to architecture manual there is no shift, so default value is 0. |
// |
// However the implementation has deviated in this from the arch manual and had hard coded shift by 28 bits which |
// is a useful optimization for MP3 decoding (if using libmad fixed point library). Shifts are no longer |
// default setup, but if you need to remain backward compatible, define your shift bits, which were normally |
// However the implementation has deviated in this from the arch manual and had |
// hard coded shift by 28 bits which is a useful optimization for MP3 decoding |
// (if using libmad fixed point library). Shifts are no longer default setup, |
// but if you need to remain backward compatible, define your shift bits, which |
// were normally |
// dest_GPR = {MACHI,MACLO}[59:28] |
`define OR1200_MAC_SHIFTBY 0 // 0 = According to arch manual, 28 = obsolete backward compatibility |
|
1297,19 → 1263,23
// Insn cache (IC) |
// |
|
// 3 for 8 bytes, 4 for 16 bytes etc |
`define OR1200_ICLS 4 |
// 4 for 16 byte line, 5 for 32 byte lines. |
`ifdef OR1200_IC_1W_32KB |
`define OR1200_ICLS 5 |
`else |
`define OR1200_ICLS 4 |
`endif |
|
// |
// IC configurations |
// |
`ifdef OR1200_IC_1W_512B |
`define OR1200_ICSIZE 9 // 512 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 7 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 8 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 9 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 5 |
`define OR1200_ICTAG_W 24 |
`define OR1200_ICSIZE 9 // 512 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 7 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 8 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 9 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 5 |
`define OR1200_ICTAG_W 24 |
`endif |
`ifdef OR1200_IC_1W_4KB |
`define OR1200_ICSIZE 12 // 4096 |
1327,6 → 1297,22
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 9 |
`define OR1200_ICTAG_W 20 |
`endif |
`ifdef OR1200_IC_1W_16KB |
`define OR1200_ICSIZE 14 // 16384 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 12 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 13 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 14 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 10 |
`define OR1200_ICTAG_W 19 |
`endif |
`ifdef OR1200_IC_1W_32KB |
`define OR1200_ICSIZE 15 // 32768 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 13 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 14 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 14 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 10 |
`define OR1200_ICTAG_W 18 |
`endif |
|
|
///////////////////////////////////////////////// |
1334,12 → 1320,32
// Data cache (DC) |
// |
|
// 3 for 8 bytes, 4 for 16 bytes etc |
`define OR1200_DCLS 4 |
// 4 for 16 bytes, 5 for 32 bytes |
`ifdef OR1200_DC_1W_32KB |
`define OR1200_DCLS 5 |
`else |
`define OR1200_DCLS 4 |
`endif |
|
// Define to perform store refill (potential performance penalty) |
// `define OR1200_DC_STORE_REFILL |
// Define to enable default behavior of cache as write through |
// Turning this off enabled write back statergy |
// |
`define OR1200_DC_WRITETHROUGH |
|
// Define to enable stores from the stack not doing writethrough. |
// EXPERIMENTAL |
//`define OR1200_DC_NOSTACKWRITETHROUGH |
|
// Data cache SPR definitions |
`define OR1200_SPRGRP_DC_ADR_WIDTH 3 |
// Data cache group SPR addresses |
`define OR1200_SPRGRP_DC_DCCR 3'd0 // Not implemented |
`define OR1200_SPRGRP_DC_DCBPR 3'd1 // Not implemented |
`define OR1200_SPRGRP_DC_DCBFR 3'd2 |
`define OR1200_SPRGRP_DC_DCBIR 3'd3 |
`define OR1200_SPRGRP_DC_DCBWR 3'd4 // Not implemented |
`define OR1200_SPRGRP_DC_DCBLR 3'd5 // Not implemented |
|
// |
// DC configurations |
// |
1359,7 → 1365,24
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 9 |
`define OR1200_DCTAG_W 20 |
`endif |
`ifdef OR1200_DC_1W_16KB |
`define OR1200_DCSIZE 14 // 16384 |
`define OR1200_DCINDX `OR1200_DCSIZE-2 // 12 |
`define OR1200_DCINDXH `OR1200_DCSIZE-1 // 13 |
`define OR1200_DCTAGL `OR1200_DCINDXH+1 // 14 |
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 10 |
`define OR1200_DCTAG_W 19 |
`endif |
`ifdef OR1200_DC_1W_32KB |
`define OR1200_DCSIZE 15 // 32768 |
`define OR1200_DCINDX `OR1200_DCSIZE-2 // 13 |
`define OR1200_DCINDXH `OR1200_DCSIZE-1 // 14 |
`define OR1200_DCTAGL `OR1200_DCINDXH+1 // 15 |
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 10 |
`define OR1200_DCTAG_W 18 |
`endif |
|
|
///////////////////////////////////////////////// |
// |
// Store buffer (SB) |
1447,9 → 1470,9
// at higher addresses in reserved space. |
// |
`define OR1200_QMEM_IADDR 32'h0080_0000 |
`define OR1200_QMEM_IMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_DADDR 32'h0080_0000 |
`define OR1200_QMEM_DMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_IMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_DADDR 32'h0080_0000 |
`define OR1200_QMEM_DMASK 32'hfff0_0000 // Max QMEM size 1MB |
|
// |
// QMEM interface byte-select capability |
1482,7 → 1505,7
// |
|
// Define if you want configuration registers implemented |
//`define OR1200_CFGR_IMPLEMENTED |
`define OR1200_CFGR_IMPLEMENTED |
|
// Define if you want full address decode inside SYS group |
`define OR1200_SYS_FULL_DECODE |
1504,7 → 1527,7
`define OR1200_VR_VER_BITS 31:24 |
|
// VR values |
`define OR1200_VR_REV 6'h01 |
`define OR1200_VR_REV 6'h08 |
`define OR1200_VR_RES1 10'h000 |
`define OR1200_VR_CFG 8'h00 |
`define OR1200_VR_VER 8'h12 |
1521,7 → 1544,8
`define OR1200_UPR_PMP_BITS 8 |
`define OR1200_UPR_PICP_BITS 9 |
`define OR1200_UPR_TTP_BITS 10 |
`define OR1200_UPR_RES1_BITS 23:11 |
`define OR1200_UPR_FPP_BITS 11 |
`define OR1200_UPR_RES1_BITS 23:12 |
`define OR1200_UPR_CUP_BITS 31:24 |
|
// UPR values |
1546,7 → 1570,11
`else |
`define OR1200_UPR_IMP 1'b1 |
`endif |
`define OR1200_UPR_MP 1'b1 // MAC always present |
`ifdef OR1200_MAC_IMPLEMENTED |
`define OR1200_UPR_MP 1'b1 |
`else |
`define OR1200_UPR_MP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`define OR1200_UPR_DUP 1'b1 |
`else |
1553,27 → 1581,32
`define OR1200_UPR_DUP 1'b0 |
`endif |
`define OR1200_UPR_PCUP 1'b0 // Performance counters not present |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_PM_IMPLEMENTED |
`define OR1200_UPR_PMP 1'b1 |
`else |
`define OR1200_UPR_PMP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_PIC_IMPLEMENTED |
`define OR1200_UPR_PICP 1'b1 |
`else |
`define OR1200_UPR_PICP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_TT_IMPLEMENTED |
`define OR1200_UPR_TTP 1'b1 |
`else |
`define OR1200_UPR_TTP 1'b0 |
`endif |
`define OR1200_UPR_RES1 13'h0000 |
`ifdef OR1200_FPU_IMPLEMENTED |
`define OR1200_UPR_FPP 1'b1 |
`else |
`define OR1200_UPR_FPP 1'b0 |
`endif |
`define OR1200_UPR_RES1 12'h000 |
`define OR1200_UPR_CUP 8'h00 |
|
// CPUCFGR fields |
`define OR1200_CPUCFGR_NSGF_BITS 3:0 |
`define OR1200_CPUCFGR_HGF_BITS 4 |
`define OR1200_CPUCFGR_HGF_BITS 4 |
`define OR1200_CPUCFGR_OB32S_BITS 5 |
`define OR1200_CPUCFGR_OB64S_BITS 6 |
`define OR1200_CPUCFGR_OF32S_BITS 7 |
1582,11 → 1615,20
`define OR1200_CPUCFGR_RES1_BITS 31:10 |
|
// CPUCFGR values |
`define OR1200_CPUCFGR_NSGF 4'h0 |
`define OR1200_CPUCFGR_HGF 1'b0 |
`define OR1200_CPUCFGR_NSGF 4'h0 |
`ifdef OR1200_RFRAM_16REG |
`define OR1200_CPUCFGR_HGF 1'b1 |
`else |
`define OR1200_CPUCFGR_HGF 1'b0 |
`endif |
`define OR1200_CPUCFGR_OB32S 1'b1 |
`define OR1200_CPUCFGR_OB64S 1'b0 |
`define OR1200_CPUCFGR_OF32S 1'b0 |
`ifdef OR1200_FPU_IMPLEMENTED |
`define OR1200_CPUCFGR_OF32S 1'b1 |
`else |
`define OR1200_CPUCFGR_OF32S 1'b0 |
`endif |
|
`define OR1200_CPUCFGR_OF64S 1'b0 |
`define OR1200_CPUCFGR_OV64S 1'b0 |
`define OR1200_CPUCFGR_RES1 22'h000000 |
1617,7 → 1659,7
`define OR1200_DMMUCFGR_NAE 3'h0 // No ATB entries |
`define OR1200_DMMUCFGR_CRI 1'b0 // No control register |
`define OR1200_DMMUCFGR_PRI 1'b0 // No protection reg |
`define OR1200_DMMUCFGR_TEIRI 1'b1 // TLB entry inv reg impl. |
`define OR1200_DMMUCFGR_TEIRI 1'b0 // TLB entry inv reg NOT impl. |
`define OR1200_DMMUCFGR_HTR 1'b0 // No HW TLB reload |
`define OR1200_DMMUCFGR_RES1 20'h00000 |
`endif |
1648,7 → 1690,7
`define OR1200_IMMUCFGR_NAE 3'h0 // No ATB entry |
`define OR1200_IMMUCFGR_CRI 1'b0 // No control reg |
`define OR1200_IMMUCFGR_PRI 1'b0 // No protection reg |
`define OR1200_IMMUCFGR_TEIRI 1'b1 // TLB entry inv reg impl |
`define OR1200_IMMUCFGR_TEIRI 1'b0 // TLB entry inv reg NOT impl |
`define OR1200_IMMUCFGR_HTR 1'b0 // No HW TLB reload |
`define OR1200_IMMUCFGR_RES1 20'h00000 |
`endif |
1672,24 → 1714,32
`define OR1200_DCCFGR_NCS 4'h0 // Irrelevant |
`define OR1200_DCCFGR_CBS 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CWS 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CCRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CBIRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CCRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBIRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBPRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBLRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBFRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CBFRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_RES1 17'h00000 |
`else |
`define OR1200_DCCFGR_NCW 3'h0 // 1 cache way |
`define OR1200_DCCFGR_NCS (`OR1200_DCTAG) // Num cache sets |
`define OR1200_DCCFGR_CBS (`OR1200_DCLS-4) // 16 byte cache block |
`define OR1200_DCCFGR_CWS 1'b0 // Write-through strategy |
`define OR1200_DCCFGR_CBS `OR1200_DCLS==4 ? 1'b0 : 1'b1 // 16 byte cache block |
`ifdef OR1200_DC_WRITETHROUGH |
`define OR1200_DCCFGR_CWS 1'b0 // Write-through strategy |
`else |
`define OR1200_DCCFGR_CWS 1'b1 // Write-back strategy |
`endif |
`define OR1200_DCCFGR_CCRI 1'b1 // Cache control reg impl. |
`define OR1200_DCCFGR_CBIRI 1'b1 // Cache block inv reg impl. |
`define OR1200_DCCFGR_CBPRI 1'b0 // Cache block prefetch reg not impl. |
`define OR1200_DCCFGR_CBLRI 1'b0 // Cache block lock reg not impl. |
`define OR1200_DCCFGR_CBFRI 1'b1 // Cache block flush reg impl. |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Cache block WB reg not impl. |
`ifdef OR1200_DC_WRITETHROUGH |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Cache block WB reg not impl. |
`else |
`define OR1200_DCCFGR_CBWBRI 1'b1 // Cache block WB reg impl. |
`endif |
`define OR1200_DCCFGR_RES1 17'h00000 |
`endif |
|
1722,7 → 1772,7
`else |
`define OR1200_ICCFGR_NCW 3'h0 // 1 cache way |
`define OR1200_ICCFGR_NCS (`OR1200_ICTAG) // Num cache sets |
`define OR1200_ICCFGR_CBS (`OR1200_ICLS-4) // 16 byte cache block |
`define OR1200_ICCFGR_CBS `OR1200_ICLS==4 ? 1'b0: 1'b1 // 16 byte cache block |
`define OR1200_ICCFGR_CWS 1'b0 // Irrelevant |
`define OR1200_ICCFGR_CCRI 1'b1 // Cache control reg impl. |
`define OR1200_ICCFGR_CBIRI 1'b1 // Cache block inv reg impl. |
1734,13 → 1784,13
`endif |
|
// DCFGR fields |
`define OR1200_DCFGR_NDP_BITS 2:0 |
`define OR1200_DCFGR_WPCI_BITS 3 |
`define OR1200_DCFGR_RES1_BITS 31:4 |
`define OR1200_DCFGR_NDP_BITS 3:0 |
`define OR1200_DCFGR_WPCI_BITS 4 |
`define OR1200_DCFGR_RES1_BITS 31:5 |
|
// DCFGR values |
`ifdef OR1200_DU_HWBKPTS |
`define OR1200_DCFGR_NDP 3'h`OR1200_DU_DVRDCR_PAIRS // # of DVR/DCR pairs |
`define OR1200_DCFGR_NDP 4'h`OR1200_DU_DVRDCR_PAIRS // # of DVR/DCR pairs |
`ifdef OR1200_DU_DWCR0 |
`define OR1200_DCFGR_WPCI 1'b1 |
`else |
1747,8 → 1797,27
`define OR1200_DCFGR_WPCI 1'b0 // WP counters not impl. |
`endif |
`else |
`define OR1200_DCFGR_NDP 3'h0 // Zero DVR/DCR pairs |
`define OR1200_DCFGR_NDP 4'h0 // Zero DVR/DCR pairs |
`define OR1200_DCFGR_WPCI 1'b0 // WP counters not impl. |
`endif |
`define OR1200_DCFGR_RES1 28'h0000000 |
|
`define OR1200_DCFGR_RES1 27'd0 |
|
/////////////////////////////////////////////////////////////////////////////// |
// Boot Address Selection // |
// // |
// Allows a definable boot address, potentially different to the usual reset // |
// vector to allow for power-on code to be run, if desired. // |
// // |
// OR1200_BOOT_ADR should be the 32-bit address of the boot location // |
// OR1200_BOOT_PCREG_DEFAULT should be ((OR1200_BOOT_ADR-4)>>2) // |
// // |
// For default reset behavior uncomment the settings under the "Boot 0x100" // |
// comment below. // |
// // |
/////////////////////////////////////////////////////////////////////////////// |
// Boot from 0xf0000100 |
//`define OR1200_BOOT_PCREG_DEFAULT 30'h3c00003f |
//`define OR1200_BOOT_ADR 32'hf0000100 |
// Boot from 0x100 |
`define OR1200_BOOT_PCREG_DEFAULT 30'h0000003f |
`define OR1200_BOOT_ADR 32'h00000100 |
/minsoc/branches/rc-1.0/backend/spartan3e_starter_kit_eth/or1200_defines.v
3,10 → 3,10
//// OR1200's definitions //// |
//// //// |
//// This file is part of the OpenRISC 1200 project //// |
//// http://www.opencores.org/cores/or1k/ //// |
//// http://opencores.org/project,or1k //// |
//// //// |
//// Description //// |
//// Parameters of the OR1200 core //// |
//// Defines for the OR1200 core //// |
//// //// |
//// To Do: //// |
//// - add parameters that are missing //// |
41,211 → 41,10
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.44 2005/10/19 11:37:56 jcastillo |
// Added support for RAMB16 Xilinx4/Spartan3 primitives |
// |
// Revision 1.43 2005/01/07 09:23:39 andreje |
// l.ff1 and l.cmov instructions added |
// |
// Revision 1.42 2004/06/08 18:17:36 lampret |
// Non-functional changes. Coding style fixes. |
// |
// Revision 1.41 2004/05/09 20:03:20 lampret |
// By default l.cust5 insns are disabled |
// |
// Revision 1.40 2004/05/09 19:49:04 lampret |
// Added some l.cust5 custom instructions as example |
// |
// Revision 1.39 2004/04/08 11:00:46 simont |
// Add support for 512B instruction cache. |
// |
// Revision 1.38 2004/04/05 08:29:57 lampret |
// Merged branch_qmem into main tree. |
// |
// Revision 1.35.4.6 2004/02/11 01:40:11 lampret |
// preliminary HW breakpoints support in debug unit (by default disabled). To enable define OR1200_DU_HWBKPTS. |
// |
// Revision 1.35.4.5 2004/01/15 06:46:38 markom |
// interface to debug changed; no more opselect; stb-ack protocol |
// |
// Revision 1.35.4.4 2004/01/11 22:45:46 andreje |
// Separate instruction and data QMEM decoders, QMEM acknowledge and byte-select added |
// |
// Revision 1.35.4.3 2003/12/17 13:43:38 simons |
// Exception prefix configuration changed. |
// |
// Revision 1.35.4.2 2003/12/05 00:05:03 lampret |
// Static exception prefix. |
// |
// Revision 1.35.4.1 2003/07/08 15:36:37 lampret |
// Added embedded memory QMEM. |
// |
// Revision 1.35 2003/04/24 00:16:07 lampret |
// No functional changes. Added defines to disable implementation of multiplier/MAC |
// |
// Revision 1.34 2003/04/20 22:23:57 lampret |
// No functional change. Only added customization for exception vectors. |
// |
// Revision 1.33 2003/04/07 20:56:07 lampret |
// Fixed OR1200_CLKDIV_x_SUPPORTED defines. Better description. |
// |
// Revision 1.32 2003/04/07 01:26:57 lampret |
// RFRAM defines comments updated. Altera LPM option added. |
// |
// Revision 1.31 2002/12/08 08:57:56 lampret |
// Added optional support for WB B3 specification (xwb_cti_o, xwb_bte_o). Made xwb_cab_o optional. |
// |
// Revision 1.30 2002/10/28 15:09:22 mohor |
// Previous check-in was done by mistake. |
// |
// Revision 1.29 2002/10/28 15:03:50 mohor |
// Signal scanb_sen renamed to scanb_en. |
// |
// Revision 1.28 2002/10/17 20:04:40 lampret |
// Added BIST scan. Special VS RAMs need to be used to implement BIST. |
// |
// Revision 1.27 2002/09/16 03:13:23 lampret |
// Removed obsolete comment. |
// |
// Revision 1.26 2002/09/08 05:52:16 lampret |
// Added optional l.div/l.divu insns. By default they are disabled. |
// |
// Revision 1.25 2002/09/07 19:16:10 lampret |
// If SR[CY] implemented with OR1200_IMPL_ADDC enabled, l.add/l.addi also set SR[CY]. |
// |
// Revision 1.24 2002/09/07 05:42:02 lampret |
// Added optional SR[CY]. Added define to enable additional (compare) flag modifiers. Defines are OR1200_IMPL_ADDC and OR1200_ADDITIONAL_FLAG_MODIFIERS. |
// |
// Revision 1.23 2002/09/04 00:50:34 lampret |
// Now most of the configuration registers are updatded automatically based on defines in or1200_defines.v. |
// |
// Revision 1.22 2002/09/03 22:28:21 lampret |
// As per Taylor Su suggestion all case blocks are full case by default and optionally (OR1200_CASE_DEFAULT) can be disabled to increase clock frequncy. |
// |
// Revision 1.21 2002/08/22 02:18:55 lampret |
// Store buffer has been tested and it works. BY default it is still disabled until uClinux confirms correct operation on FPGA board. |
// |
// Revision 1.20 2002/08/18 21:59:45 lampret |
// Disable SB until it is tested |
// |
// Revision 1.19 2002/08/18 19:53:08 lampret |
// Added store buffer. |
// |
// Revision 1.18 2002/08/15 06:04:11 lampret |
// Fixed Xilinx trace buffer address. REported by Taylor Su. |
// |
// Revision 1.17 2002/08/12 05:31:44 lampret |
// Added OR1200_WB_RETRY. Moved WB registered outsputs / samples inputs into lower section. |
// |
// Revision 1.16 2002/07/14 22:17:17 lampret |
// Added simple trace buffer [only for Xilinx Virtex target]. Fixed instruction fetch abort when new exception is recognized. |
// |
// Revision 1.15 2002/06/08 16:20:21 lampret |
// Added defines for enabling generic FF based memory macro for register file. |
// |
// Revision 1.14 2002/03/29 16:24:06 lampret |
// Changed comment about synopsys to _synopsys_ because synthesis was complaining about unknown directives |
// |
// Revision 1.13 2002/03/29 15:16:55 lampret |
// Some of the warnings fixed. |
// |
// Revision 1.12 2002/03/28 19:25:42 lampret |
// Added second type of Virtual Silicon two-port SRAM (for register file). Changed defines for VS STP RAMs. |
// |
// Revision 1.11 2002/03/28 19:13:17 lampret |
// Updated defines. |
// |
// Revision 1.10 2002/03/14 00:30:24 lampret |
// Added alternative for critical path in DU. |
// |
// Revision 1.9 2002/03/11 01:26:26 lampret |
// Fixed async loop. Changed multiplier type for ASIC. |
// |
// Revision 1.8 2002/02/11 04:33:17 lampret |
// Speed optimizations (removed duplicate _cyc_ and _stb_). Fixed D/IMMU cache-inhibit attr. |
// |
// Revision 1.7 2002/02/01 19:56:54 lampret |
// Fixed combinational loops. |
// |
// Revision 1.6 2002/01/19 14:10:22 lampret |
// Fixed OR1200_XILINX_RAM32X1D. |
// |
// Revision 1.5 2002/01/18 07:56:00 lampret |
// No more low/high priority interrupts (PICPR removed). Added tick timer exception. Added exception prefix (SR[EPH]). Fixed single-step bug whenreading NPC. |
// |
// Revision 1.4 2002/01/14 09:44:12 lampret |
// Default ASIC configuration does not sample WB inputs. |
// |
// Revision 1.3 2002/01/08 00:51:08 lampret |
// Fixed typo. OR1200_REGISTERED_OUTPUTS was not defined. Should be. |
// |
// Revision 1.2 2002/01/03 21:23:03 lampret |
// Uncommented OR1200_REGISTERED_OUTPUTS for FPGA target. |
// |
// Revision 1.1 2002/01/03 08:16:15 lampret |
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. |
// |
// Revision 1.20 2001/12/04 05:02:36 lampret |
// Added OR1200_GENERIC_MULTP2_32X32 and OR1200_ASIC_MULTP2_32X32 |
// |
// Revision 1.19 2001/11/27 19:46:57 lampret |
// Now FPGA and ASIC target are separate. |
// |
// Revision 1.18 2001/11/23 21:42:31 simons |
// Program counter divided to PPC and NPC. |
// |
// Revision 1.17 2001/11/23 08:38:51 lampret |
// Changed DSR/DRR behavior and exception detection. |
// |
// Revision 1.16 2001/11/20 21:30:38 lampret |
// Added OR1200_REGISTERED_INPUTS. |
// |
// Revision 1.15 2001/11/19 14:29:48 simons |
// Cashes disabled. |
// |
// Revision 1.14 2001/11/13 10:02:21 lampret |
// Added 'setpc'. Renamed some signals (except_flushpipe into flushpipe etc) |
// |
// Revision 1.13 2001/11/12 01:45:40 lampret |
// Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports. |
// |
// Revision 1.12 2001/11/10 03:43:57 lampret |
// Fixed exceptions. |
// |
// Revision 1.11 2001/11/02 18:57:14 lampret |
// Modified virtual silicon instantiations. |
// |
// Revision 1.10 2001/10/21 17:57:16 lampret |
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. |
// |
// Revision 1.9 2001/10/19 23:28:46 lampret |
// Fixed some synthesis warnings. Configured with caches and MMUs. |
// |
// Revision 1.8 2001/10/14 13:12:09 lampret |
// MP3 version. |
// |
// Revision 1.1.1.1 2001/10/06 10:18:36 igorm |
// no message |
// |
// Revision 1.3 2001/08/17 08:01:19 lampret |
// IC enable/disable. |
// |
// Revision 1.2 2001/08/13 03:36:20 lampret |
// Added cfg regs. Moved all defines into one defines.v file. More cleanup. |
// |
// Revision 1.1 2001/08/09 13:39:33 lampret |
// Major clean-up. |
// |
// Revision 1.2 2001/07/22 03:31:54 lampret |
// Fixed RAM's oen bug. Cache bypass under development. |
// |
// Revision 1.1 2001/07/20 00:46:03 lampret |
// Development version of RTL. Libraries are missing. |
// |
// |
// $Log: or1200_defines.v,v $ |
// Revision 2.0 2010/06/30 11:00:00 ORSoC |
// Minor update: |
// Defines added, bugs fixed. |
|
// |
// Dump VCD |
321,10 → 120,13
// Target FPGA memories |
// |
//`define OR1200_ALTERA_LPM |
`define OR1200_XILINX_RAMB16 |
//`define OR1200_XILINX_RAMB16 |
//`define OR1200_XILINX_RAMB4 |
//`define OR1200_XILINX_RAM32X1D |
//`define OR1200_USE_RAM16X1D_FOR_RAM32X1D |
// Generic models should infer RAM blocks at synthesis time (not only effects |
// single port ram.) |
`define OR1200_GENERIC |
|
// |
// Do not implement Data cache |
359,10 → 161,14
// (consider available FPGA memory resources) |
// |
//`define OR1200_IC_1W_512B |
`define OR1200_IC_1W_4KB |
//`define OR1200_IC_1W_8KB |
`define OR1200_DC_1W_4KB |
//`define OR1200_DC_1W_8KB |
//`define OR1200_IC_1W_4KB |
`define OR1200_IC_1W_8KB |
//`define OR1200_IC_1W_16KB |
//`define OR1200_IC_1W_32KB |
//`define OR1200_DC_1W_4KB |
`define OR1200_DC_1W_8KB |
//`define OR1200_DC_1W_16KB |
//`define OR1200_DC_1W_32KB |
|
`endif |
|
373,6 → 179,11
// |
|
// |
// Reset active low |
// |
//`define OR1200_RST_ACT_LOW |
|
// |
// Enable RAM BIST |
// |
// At the moment this only works for Virtual Silicon |
424,7 → 235,7
// |
// To remove *wb_cab_o ports undefine this macro. |
// |
`define OR1200_WB_CAB |
//`define OR1200_WB_CAB |
|
// |
// WISHBONE B3 compatible interface |
436,9 → 247,14
// To enable *wb_cti_o/*wb_bte_o ports, |
// define this macro. |
// |
//`define OR1200_WB_B3 |
`define OR1200_WB_B3 |
|
// |
// LOG all WISHBONE accesses |
// |
`define OR1200_LOG_WB_ACCESS |
|
// |
// Enable additional synthesis directives if using |
// _Synopsys_ synthesis tool |
// |
486,27 → 302,44
`define OR1200_IMPL_ADDC |
|
// |
// Implement l.sub instruction |
// |
// By default implementation of l.sub instructions |
// is enabled to be compliant with the simulator. |
// If you don't use carry bit, then disable |
// implementation to save area. |
// |
`define OR1200_IMPL_SUB |
|
// |
// Implement carry bit SR[CY] |
// |
// |
// By default implementation of SR[CY] is enabled |
// to be compliant with the simulator. However |
// SR[CY] is explicitly only used by l.addc/l.addic |
// instructions and if these two insns are not |
// to be compliant with the simulator. However SR[CY] |
// is explicitly only used by l.addc/l.addic/l.sub |
// instructions and if these three insns are not |
// implemented there is not much point having SR[CY]. |
// |
`define OR1200_IMPL_CY |
|
// |
// Implement optional l.div/l.divu instructions |
// Implement carry bit SR[OV] |
// |
// By default divide instructions are not implemented |
// to save area and increase clock frequency. or32 C/C++ |
// compiler can use soft library for division. |
// Compiler doesn't use this, but other code may like |
// to. |
// |
// To implement divide, multiplier needs to be implemented. |
`define OR1200_IMPL_OV |
|
// |
//`define OR1200_IMPL_DIV |
// Implement carry bit SR[OVE] |
// |
// Overflow interrupt indicator. When enabled, SR[OV] flag |
// does not remain asserted after exception. |
// |
`define OR1200_IMPL_OVE |
|
|
// |
// Implement rotate in the ALU |
// |
526,40 → 359,71
// |
// Type of ALU compare to implement |
// |
// Try either one to find what yields |
// higher clock frequencyin your case. |
// Try to find which synthesizes with |
// most efficient logic use or highest speed. |
// |
//`define OR1200_IMPL_ALU_COMP1 |
`define OR1200_IMPL_ALU_COMP2 |
//`define OR1200_IMPL_ALU_COMP2 |
`define OR1200_IMPL_ALU_COMP3 |
|
// |
// Implement Find First/Last '1' |
// |
`define OR1200_IMPL_ALU_FFL1 |
|
// |
// Implement l.cust5 ALU instruction |
// |
//`define OR1200_IMPL_ALU_CUST5 |
|
// |
// Implement l.extXs and l.extXz instructions |
// |
`define OR1200_IMPL_ALU_EXT |
|
// |
// Implement multiplier |
// |
// By default multiplier is implemented |
// |
//`define OR1200_MULT_IMPLEMENTED |
`define OR1200_MULT_IMPLEMENTED |
|
// |
// Implement multiply-and-accumulate |
// |
// By default MAC is implemented. To |
// implement MAC, multiplier needs to be |
// implement MAC, multiplier (non-serial) needs to be |
// implemented. |
// |
//`define OR1200_MAC_IMPLEMENTED |
|
// |
// Low power, slower multiplier |
// Implement optional l.div/l.divu instructions |
// |
// Select between low-power (larger) multiplier |
// and faster multiplier. The actual difference |
// is only AND logic that prevents distribution |
// of operands into the multiplier when instruction |
// in execution is not multiply instruction |
// By default divide instructions are not implemented |
// to save area. |
// |
//`define OR1200_LOWPWR_MULT |
// |
//`define OR1200_DIV_IMPLEMENTED |
|
// |
// Serial multiplier. |
// |
//`define OR1200_MULT_SERIAL |
|
// |
// Serial divider. |
// Uncomment to use a serial divider, otherwise will |
// be a generic parallel implementation. |
// |
`define OR1200_DIV_SERIAL |
|
// |
// Implement HW Single Precision FPU |
// |
//`define OR1200_FPU_IMPLEMENTED |
|
// |
// Clock ratio RISC clock versus WB clock |
// |
// If you plan to run WB:RISC clock fixed to 1:1, disable |
571,7 → 435,7
// For WB:RISC 1:4, 1:2 or 1:1, enable both defines and use |
// clmode to set ratio |
// |
`define OR1200_CLKDIV_2_SUPPORTED |
//`define OR1200_CLKDIV_2_SUPPORTED |
//`define OR1200_CLKDIV_4_SUPPORTED |
|
// |
580,11 → 444,16
// Memory macro w/ two ports (see or1200_tpram_32x32.v) |
//`define OR1200_RFRAM_TWOPORT |
// |
// Memory macro dual port (see or1200_dpram_32x32.v) |
//`define OR1200_RFRAM_DUALPORT |
// Memory macro dual port (see or1200_dpram.v) |
`define OR1200_RFRAM_DUALPORT |
|
// |
// Generic (flip-flop based) register file (see or1200_rfram_generic.v) |
`define OR1200_RFRAM_GENERIC |
//`define OR1200_RFRAM_GENERIC |
// Generic register file supports - 16 registers |
`ifdef OR1200_RFRAM_GENERIC |
// `define OR1200_RFRAM_16REG |
`endif |
|
// |
// Type of mem2reg aligner to implement. |
597,54 → 466,91
//`define OR1200_IMPL_MEM2REG2 |
|
// |
// Reset value and event |
// |
`ifdef OR1200_RST_ACT_LOW |
`define OR1200_RST_VALUE (1'b0) |
`define OR1200_RST_EVENT negedge |
`else |
`define OR1200_RST_VALUE (1'b1) |
`define OR1200_RST_EVENT posedge |
`endif |
|
// |
// ALUOPs |
// |
`define OR1200_ALUOP_WIDTH 4 |
`define OR1200_ALUOP_NOP 4'd4 |
/* Order defined by arith insns that have two source operands both in regs |
(see binutils/include/opcode/or32.h) */ |
`define OR1200_ALUOP_ADD 4'd0 |
`define OR1200_ALUOP_ADDC 4'd1 |
`define OR1200_ALUOP_SUB 4'd2 |
`define OR1200_ALUOP_AND 4'd3 |
`define OR1200_ALUOP_OR 4'd4 |
`define OR1200_ALUOP_XOR 4'd5 |
`define OR1200_ALUOP_MUL 4'd6 |
`define OR1200_ALUOP_CUST5 4'd7 |
`define OR1200_ALUOP_SHROT 4'd8 |
`define OR1200_ALUOP_DIV 4'd9 |
`define OR1200_ALUOP_DIVU 4'd10 |
/* Order not specifically defined. */ |
`define OR1200_ALUOP_IMM 4'd11 |
`define OR1200_ALUOP_MOVHI 4'd12 |
`define OR1200_ALUOP_COMP 4'd13 |
`define OR1200_ALUOP_MTSR 4'd14 |
`define OR1200_ALUOP_MFSR 4'd15 |
`define OR1200_ALUOP_CMOV 4'd14 |
`define OR1200_ALUOP_FF1 4'd15 |
`define OR1200_ALUOP_WIDTH 5 |
`define OR1200_ALUOP_NOP 5'b0_0100 |
/* LS-nibble encodings correspond to bits [3:0] of instruction */ |
`define OR1200_ALUOP_ADD 5'b0_0000 // 0 |
`define OR1200_ALUOP_ADDC 5'b0_0001 // 1 |
`define OR1200_ALUOP_SUB 5'b0_0010 // 2 |
`define OR1200_ALUOP_AND 5'b0_0011 // 3 |
`define OR1200_ALUOP_OR 5'b0_0100 // 4 |
`define OR1200_ALUOP_XOR 5'b0_0101 // 5 |
`define OR1200_ALUOP_MUL 5'b0_0110 // 6 |
`define OR1200_ALUOP_RESERVED 5'b0_0111 // 7 |
`define OR1200_ALUOP_SHROT 5'b0_1000 // 8 |
`define OR1200_ALUOP_DIV 5'b0_1001 // 9 |
`define OR1200_ALUOP_DIVU 5'b0_1010 // a |
`define OR1200_ALUOP_MULU 5'b0_1011 // b |
`define OR1200_ALUOP_EXTHB 5'b0_1100 // c |
`define OR1200_ALUOP_EXTW 5'b0_1101 // d |
`define OR1200_ALUOP_CMOV 5'b0_1110 // e |
`define OR1200_ALUOP_FFL1 5'b0_1111 // f |
|
/* Values sent to ALU from decode unit - not defined by ISA */ |
`define OR1200_ALUOP_COMP 5'b1_0000 // Comparison |
`define OR1200_ALUOP_MOVHI 5'b1_0001 // Move-high |
`define OR1200_ALUOP_CUST5 5'b1_0010 // l.cust5 |
|
// ALU instructions second opcode field |
`define OR1200_ALUOP2_POS 9:6 |
`define OR1200_ALUOP2_WIDTH 4 |
|
// |
// MACOPs |
// |
`define OR1200_MACOP_WIDTH 2 |
`define OR1200_MACOP_NOP 2'b00 |
`define OR1200_MACOP_MAC 2'b01 |
`define OR1200_MACOP_MSB 2'b10 |
`define OR1200_MACOP_WIDTH 3 |
`define OR1200_MACOP_NOP 3'b000 |
`define OR1200_MACOP_MAC 3'b001 |
`define OR1200_MACOP_MSB 3'b010 |
|
// |
// Shift/rotate ops |
// |
`define OR1200_SHROTOP_WIDTH 2 |
`define OR1200_SHROTOP_NOP 2'd0 |
`define OR1200_SHROTOP_SLL 2'd0 |
`define OR1200_SHROTOP_SRL 2'd1 |
`define OR1200_SHROTOP_SRA 2'd2 |
`define OR1200_SHROTOP_ROR 2'd3 |
`define OR1200_SHROTOP_WIDTH 4 |
`define OR1200_SHROTOP_NOP 4'd0 |
`define OR1200_SHROTOP_SLL 4'd0 |
`define OR1200_SHROTOP_SRL 4'd1 |
`define OR1200_SHROTOP_SRA 4'd2 |
`define OR1200_SHROTOP_ROR 4'd3 |
|
// |
// Zero/Sign Extend ops |
// |
`define OR1200_EXTHBOP_WIDTH 4 |
`define OR1200_EXTHBOP_BS 4'h1 |
`define OR1200_EXTHBOP_HS 4'h0 |
`define OR1200_EXTHBOP_BZ 4'h3 |
`define OR1200_EXTHBOP_HZ 4'h2 |
`define OR1200_EXTWOP_WIDTH 4 |
`define OR1200_EXTWOP_WS 4'h0 |
`define OR1200_EXTWOP_WZ 4'h1 |
|
// Execution cycles per instruction |
`define OR1200_MULTICYCLE_WIDTH 2 |
`define OR1200_ONE_CYCLE 2'd0 |
`define OR1200_TWO_CYCLES 2'd1 |
`define OR1200_MULTICYCLE_WIDTH 3 |
`define OR1200_ONE_CYCLE 3'd0 |
`define OR1200_TWO_CYCLES 3'd1 |
|
// Execution control which will "wait on" a module to finish |
`define OR1200_WAIT_ON_WIDTH 2 |
`define OR1200_WAIT_ON_NOTHING `OR1200_WAIT_ON_WIDTH'd0 |
`define OR1200_WAIT_ON_MULTMAC `OR1200_WAIT_ON_WIDTH'd1 |
`define OR1200_WAIT_ON_FPU `OR1200_WAIT_ON_WIDTH'd2 |
`define OR1200_WAIT_ON_MTSPR `OR1200_WAIT_ON_WIDTH'd3 |
|
|
// Operand MUX selects |
`define OR1200_SEL_WIDTH 2 |
`define OR1200_SEL_RF 2'd0 |
678,12 → 584,18
`define OR1200_LSUOP_LHS 4'b0101 |
`define OR1200_LSUOP_LWZ 4'b0110 |
`define OR1200_LSUOP_LWS 4'b0111 |
`define OR1200_LSUOP_LD 4'b0001 |
`define OR1200_LSUOP_SD 4'b1000 |
`define OR1200_LSUOP_SB 4'b1010 |
`define OR1200_LSUOP_SH 4'b1100 |
`define OR1200_LSUOP_SW 4'b1110 |
`define OR1200_LSUOP_LD 4'b0001 |
`define OR1200_LSUOP_SD 4'b1000 |
`define OR1200_LSUOP_SB 4'b1010 |
`define OR1200_LSUOP_SH 4'b1100 |
`define OR1200_LSUOP_SW 4'b1110 |
|
// Number of bits of load/store EA precalculated in ID stage |
// for balancing ID and EX stages. |
// |
// Valid range: 2,3,...,30,31 |
`define OR1200_LSUEA_PRECALC 2 |
|
// FETCHOPs |
`define OR1200_FETCHOP_WIDTH 1 |
`define OR1200_FETCHOP_NOP 1'b0 |
693,13 → 605,15
// Register File Write-Back OPs |
// |
// Bit 0: register file write enable |
// Bits 2-1: write-back mux selects |
`define OR1200_RFWBOP_WIDTH 3 |
`define OR1200_RFWBOP_NOP 3'b000 |
`define OR1200_RFWBOP_ALU 3'b001 |
`define OR1200_RFWBOP_LSU 3'b011 |
`define OR1200_RFWBOP_SPRS 3'b101 |
`define OR1200_RFWBOP_LR 3'b111 |
// Bits 3-1: write-back mux selects |
// |
`define OR1200_RFWBOP_WIDTH 4 |
`define OR1200_RFWBOP_NOP 4'b0000 |
`define OR1200_RFWBOP_ALU 3'b000 |
`define OR1200_RFWBOP_LSU 3'b001 |
`define OR1200_RFWBOP_SPRS 3'b010 |
`define OR1200_RFWBOP_LR 3'b011 |
`define OR1200_RFWBOP_FPU 3'b100 |
|
// Compare instructions |
`define OR1200_COP_SFEQ 3'b000 |
713,6 → 627,33
`define OR1200_COMPOP_WIDTH 4 |
|
// |
// FP OPs |
// |
// MSbit indicates FPU operation valid |
// |
`define OR1200_FPUOP_WIDTH 8 |
// FPU unit from Usselman takes 5 cycles from decode, so 4 ex. cycles |
`define OR1200_FPUOP_CYCLES 3'd4 |
// FP instruction is double precision if bit 4 is set. We're a 32-bit |
// implementation thus do not support double precision FP |
`define OR1200_FPUOP_DOUBLE_BIT 4 |
`define OR1200_FPUOP_ADD 8'b0000_0000 |
`define OR1200_FPUOP_SUB 8'b0000_0001 |
`define OR1200_FPUOP_MUL 8'b0000_0010 |
`define OR1200_FPUOP_DIV 8'b0000_0011 |
`define OR1200_FPUOP_ITOF 8'b0000_0100 |
`define OR1200_FPUOP_FTOI 8'b0000_0101 |
`define OR1200_FPUOP_REM 8'b0000_0110 |
`define OR1200_FPUOP_RESERVED 8'b0000_0111 |
// FP Compare instructions |
`define OR1200_FPCOP_SFEQ 8'b0000_1000 |
`define OR1200_FPCOP_SFNE 8'b0000_1001 |
`define OR1200_FPCOP_SFGT 8'b0000_1010 |
`define OR1200_FPCOP_SFGE 8'b0000_1011 |
`define OR1200_FPCOP_SFLT 8'b0000_1100 |
`define OR1200_FPCOP_SFLE 8'b0000_1101 |
|
// |
// TAGs for instruction bus |
// |
`define OR1200_ITAG_IDLE 4'h0 // idle bus |
740,9 → 681,6
// SHROT_OP position in machine word |
`define OR1200_SHROTOP_POS 7:6 |
|
// ALU instructions multicycle field in machine word |
`define OR1200_ALUMCYC_POS 9:8 |
|
// |
// Instruction opcode groups (basic) |
// |
752,6 → 690,7
`define OR1200_OR32_BF 6'b000100 |
`define OR1200_OR32_NOP 6'b000101 |
`define OR1200_OR32_MOVHI 6'b000110 |
`define OR1200_OR32_MACRC 6'b000110 |
`define OR1200_OR32_XSYNC 6'b001000 |
`define OR1200_OR32_RFE 6'b001001 |
/* */ |
776,6 → 715,7
/* */ |
`define OR1200_OR32_MTSPR 6'b110000 |
`define OR1200_OR32_MACMSB 6'b110001 |
`define OR1200_OR32_FLOAT 6'b110010 |
/* */ |
`define OR1200_OR32_SW 6'b110101 |
`define OR1200_OR32_SB 6'b110110 |
782,9 → 722,8
`define OR1200_OR32_SH 6'b110111 |
`define OR1200_OR32_ALU 6'b111000 |
`define OR1200_OR32_SFXX 6'b111001 |
//`define OR1200_OR32_CUST5 6'b111100 |
`define OR1200_OR32_CUST5 6'b111100 |
|
|
///////////////////////////////////////////////////// |
// |
// Exceptions |
812,9 → 751,9
// |
// Sum of these two defines needs to be 28 |
// |
`define OR1200_EXCEPT_EPH0_P 20'h00000 |
`define OR1200_EXCEPT_EPH1_P 20'hF0000 |
`define OR1200_EXCEPT_V 8'h00 |
`define OR1200_EXCEPT_EPH0_P 20'h00000 |
`define OR1200_EXCEPT_EPH1_P 20'hF0000 |
`define OR1200_EXCEPT_V 8'h00 |
|
// |
// N part width |
829,7 → 768,7
// |
`define OR1200_EXCEPT_UNUSED `OR1200_EXCEPT_WIDTH'hf |
`define OR1200_EXCEPT_TRAP `OR1200_EXCEPT_WIDTH'he |
`define OR1200_EXCEPT_BREAK `OR1200_EXCEPT_WIDTH'hd |
`define OR1200_EXCEPT_FLOAT `OR1200_EXCEPT_WIDTH'hd |
`define OR1200_EXCEPT_SYSCALL `OR1200_EXCEPT_WIDTH'hc |
`define OR1200_EXCEPT_RANGE `OR1200_EXCEPT_WIDTH'hb |
`define OR1200_EXCEPT_ITLBMISS `OR1200_EXCEPT_WIDTH'ha |
870,8 → 809,8
`define OR1200_SPR_GROUP_PM 5'd08 |
`define OR1200_SPR_GROUP_PIC 5'd09 |
`define OR1200_SPR_GROUP_TT 5'd10 |
`define OR1200_SPR_GROUP_FPU 5'd11 |
|
|
///////////////////////////////////////////////////// |
// |
// System group |
885,6 → 824,7
`define OR1200_SPR_NPC 11'd16 |
`define OR1200_SPR_SR 11'd17 |
`define OR1200_SPR_PPC 11'd18 |
`define OR1200_SPR_FPCSR 11'd20 |
`define OR1200_SPR_EPCR 11'd32 |
`define OR1200_SPR_EEAR 11'd48 |
`define OR1200_SPR_ESR 11'd64 |
892,7 → 832,7
// |
// SR bits |
// |
`define OR1200_SR_WIDTH 16 |
`define OR1200_SR_WIDTH 17 |
`define OR1200_SR_SM 0 |
`define OR1200_SR_TEE 1 |
`define OR1200_SR_IEE 2 |
903,12 → 843,13
`define OR1200_SR_LEE 7 |
`define OR1200_SR_CE 8 |
`define OR1200_SR_F 9 |
`define OR1200_SR_CY 10 // Unused |
`define OR1200_SR_OV 11 // Unused |
`define OR1200_SR_OVE 12 // Unused |
`define OR1200_SR_CY 10 // Optional |
`define OR1200_SR_OV 11 // Optional |
`define OR1200_SR_OVE 12 // Optional |
`define OR1200_SR_DSX 13 // Unused |
`define OR1200_SR_EPH 14 |
`define OR1200_SR_FO 15 |
`define OR1200_SR_TED 16 |
`define OR1200_SR_CID 31:28 // Unimplemented |
|
// |
924,6 → 865,24
// |
`define OR1200_SR_EPH_DEF 1'b0 |
|
|
// |
// FPCSR bits |
// |
`define OR1200_FPCSR_WIDTH 12 |
`define OR1200_FPCSR_FPEE 0 |
`define OR1200_FPCSR_RM 2:1 |
`define OR1200_FPCSR_OVF 3 |
`define OR1200_FPCSR_UNF 4 |
`define OR1200_FPCSR_SNF 5 |
`define OR1200_FPCSR_QNF 6 |
`define OR1200_FPCSR_ZF 7 |
`define OR1200_FPCSR_IXF 8 |
`define OR1200_FPCSR_IVF 9 |
`define OR1200_FPCSR_INF 10 |
`define OR1200_FPCSR_DZF 11 |
`define OR1200_FPCSR_RES 31:12 |
|
///////////////////////////////////////////////////// |
// |
// Power Management (PM) |
971,14 → 930,18
// however already enough for use |
// with or32 gdb) |
// |
`define OR1200_DU_HWBKPTS |
//`define OR1200_DU_HWBKPTS |
|
// Number of DVR/DCR pairs if HW breakpoints enabled |
// Comment / uncomment DU_DVRn / DU_DCRn pairs bellow according to this number ! |
// DU_DVR0..DU_DVR7 should be uncommented for 8 DU_DVRDCR_PAIRS |
`define OR1200_DU_DVRDCR_PAIRS 8 |
|
// Define if you want trace buffer |
// (for now only available for Xilinx Virtex FPGAs) |
//`define OR1200_DU_TB_IMPLEMENTED |
|
|
// |
// Address offsets of DU registers inside DU group |
// |
1012,10 → 975,10
`define OR1200_DU_DRR 11'd21 |
`ifdef OR1200_DU_TB_IMPLEMENTED |
`define OR1200_DU_TBADR 11'h0ff |
`define OR1200_DU_TBIA 11'h1xx |
`define OR1200_DU_TBIM 11'h2xx |
`define OR1200_DU_TBAR 11'h3xx |
`define OR1200_DU_TBTS 11'h4xx |
`define OR1200_DU_TBIA 11'h1?? |
`define OR1200_DU_TBIM 11'h2?? |
`define OR1200_DU_TBAR 11'h3?? |
`define OR1200_DU_TBTS 11'h4?? |
`endif |
|
// Position of offset bits inside SPR address |
1038,15 → 1001,17
`define OR1200_DU_DMR1_CW7 15:14 |
`define OR1200_DU_DMR1_CW8 17:16 |
`define OR1200_DU_DMR1_CW9 19:18 |
`define OR1200_DU_DMR1_RES 21:20 |
`define OR1200_DU_DMR1_CW10 21:20 |
`define OR1200_DU_DMR1_ST 22 |
`define OR1200_DU_DMR1_BT 23 |
`define OR1200_DU_DMR1_DXFW 24 |
`define OR1200_DU_DMR1_ETE 25 |
|
// DMR2 bits |
`define OR1200_DU_DMR2_WCE0 0 |
`define OR1200_DU_DMR2_WCE1 1 |
`define OR1200_DU_DMR2_AWTC 11:2 |
`define OR1200_DU_DMR2_WGB 21:12 |
`define OR1200_DU_DMR2_AWTC 12:2 |
`define OR1200_DU_DMR2_WGB 23:13 |
|
// DWCR bits |
`define OR1200_DU_DWCR_COUNT 15:0 |
1066,7 → 1031,7
`define OR1200_DU_DSR_IME 9 |
`define OR1200_DU_DSR_RE 10 |
`define OR1200_DU_DSR_SCE 11 |
`define OR1200_DU_DSR_BE 12 |
`define OR1200_DU_DSR_FPE 12 |
`define OR1200_DU_DSR_TE 13 |
|
// DRR bits |
1082,7 → 1047,7
`define OR1200_DU_DRR_IME 9 |
`define OR1200_DU_DRR_RE 10 |
`define OR1200_DU_DRR_SCE 11 |
`define OR1200_DU_DRR_BE 12 |
`define OR1200_DU_DRR_FPE 12 |
`define OR1200_DU_DRR_TE 13 |
|
// Define if reading DU regs is allowed |
1163,10 → 1128,11
// Shift {MACHI,MACLO} into destination register when executing l.macrc |
// |
// According to architecture manual there is no shift, so default value is 0. |
// |
// However the implementation has deviated in this from the arch manual and had hard coded shift by 28 bits which |
// is a useful optimization for MP3 decoding (if using libmad fixed point library). Shifts are no longer |
// default setup, but if you need to remain backward compatible, define your shift bits, which were normally |
// However the implementation has deviated in this from the arch manual and had |
// hard coded shift by 28 bits which is a useful optimization for MP3 decoding |
// (if using libmad fixed point library). Shifts are no longer default setup, |
// but if you need to remain backward compatible, define your shift bits, which |
// were normally |
// dest_GPR = {MACHI,MACLO}[59:28] |
`define OR1200_MAC_SHIFTBY 0 // 0 = According to arch manual, 28 = obsolete backward compatibility |
|
1297,19 → 1263,23
// Insn cache (IC) |
// |
|
// 3 for 8 bytes, 4 for 16 bytes etc |
`define OR1200_ICLS 4 |
// 4 for 16 byte line, 5 for 32 byte lines. |
`ifdef OR1200_IC_1W_32KB |
`define OR1200_ICLS 5 |
`else |
`define OR1200_ICLS 4 |
`endif |
|
// |
// IC configurations |
// |
`ifdef OR1200_IC_1W_512B |
`define OR1200_ICSIZE 9 // 512 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 7 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 8 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 9 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 5 |
`define OR1200_ICTAG_W 24 |
`define OR1200_ICSIZE 9 // 512 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 7 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 8 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 9 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 5 |
`define OR1200_ICTAG_W 24 |
`endif |
`ifdef OR1200_IC_1W_4KB |
`define OR1200_ICSIZE 12 // 4096 |
1327,6 → 1297,22
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 9 |
`define OR1200_ICTAG_W 20 |
`endif |
`ifdef OR1200_IC_1W_16KB |
`define OR1200_ICSIZE 14 // 16384 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 12 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 13 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 14 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 10 |
`define OR1200_ICTAG_W 19 |
`endif |
`ifdef OR1200_IC_1W_32KB |
`define OR1200_ICSIZE 15 // 32768 |
`define OR1200_ICINDX `OR1200_ICSIZE-2 // 13 |
`define OR1200_ICINDXH `OR1200_ICSIZE-1 // 14 |
`define OR1200_ICTAGL `OR1200_ICINDXH+1 // 14 |
`define OR1200_ICTAG `OR1200_ICSIZE-`OR1200_ICLS // 10 |
`define OR1200_ICTAG_W 18 |
`endif |
|
|
///////////////////////////////////////////////// |
1334,12 → 1320,32
// Data cache (DC) |
// |
|
// 3 for 8 bytes, 4 for 16 bytes etc |
`define OR1200_DCLS 4 |
// 4 for 16 bytes, 5 for 32 bytes |
`ifdef OR1200_DC_1W_32KB |
`define OR1200_DCLS 5 |
`else |
`define OR1200_DCLS 4 |
`endif |
|
// Define to perform store refill (potential performance penalty) |
// `define OR1200_DC_STORE_REFILL |
// Define to enable default behavior of cache as write through |
// Turning this off enabled write back statergy |
// |
`define OR1200_DC_WRITETHROUGH |
|
// Define to enable stores from the stack not doing writethrough. |
// EXPERIMENTAL |
//`define OR1200_DC_NOSTACKWRITETHROUGH |
|
// Data cache SPR definitions |
`define OR1200_SPRGRP_DC_ADR_WIDTH 3 |
// Data cache group SPR addresses |
`define OR1200_SPRGRP_DC_DCCR 3'd0 // Not implemented |
`define OR1200_SPRGRP_DC_DCBPR 3'd1 // Not implemented |
`define OR1200_SPRGRP_DC_DCBFR 3'd2 |
`define OR1200_SPRGRP_DC_DCBIR 3'd3 |
`define OR1200_SPRGRP_DC_DCBWR 3'd4 // Not implemented |
`define OR1200_SPRGRP_DC_DCBLR 3'd5 // Not implemented |
|
// |
// DC configurations |
// |
1359,7 → 1365,24
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 9 |
`define OR1200_DCTAG_W 20 |
`endif |
`ifdef OR1200_DC_1W_16KB |
`define OR1200_DCSIZE 14 // 16384 |
`define OR1200_DCINDX `OR1200_DCSIZE-2 // 12 |
`define OR1200_DCINDXH `OR1200_DCSIZE-1 // 13 |
`define OR1200_DCTAGL `OR1200_DCINDXH+1 // 14 |
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 10 |
`define OR1200_DCTAG_W 19 |
`endif |
`ifdef OR1200_DC_1W_32KB |
`define OR1200_DCSIZE 15 // 32768 |
`define OR1200_DCINDX `OR1200_DCSIZE-2 // 13 |
`define OR1200_DCINDXH `OR1200_DCSIZE-1 // 14 |
`define OR1200_DCTAGL `OR1200_DCINDXH+1 // 15 |
`define OR1200_DCTAG `OR1200_DCSIZE-`OR1200_DCLS // 10 |
`define OR1200_DCTAG_W 18 |
`endif |
|
|
///////////////////////////////////////////////// |
// |
// Store buffer (SB) |
1447,9 → 1470,9
// at higher addresses in reserved space. |
// |
`define OR1200_QMEM_IADDR 32'h0080_0000 |
`define OR1200_QMEM_IMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_DADDR 32'h0080_0000 |
`define OR1200_QMEM_DMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_IMASK 32'hfff0_0000 // Max QMEM size 1MB |
`define OR1200_QMEM_DADDR 32'h0080_0000 |
`define OR1200_QMEM_DMASK 32'hfff0_0000 // Max QMEM size 1MB |
|
// |
// QMEM interface byte-select capability |
1504,7 → 1527,7
`define OR1200_VR_VER_BITS 31:24 |
|
// VR values |
`define OR1200_VR_REV 6'h01 |
`define OR1200_VR_REV 6'h08 |
`define OR1200_VR_RES1 10'h000 |
`define OR1200_VR_CFG 8'h00 |
`define OR1200_VR_VER 8'h12 |
1521,7 → 1544,8
`define OR1200_UPR_PMP_BITS 8 |
`define OR1200_UPR_PICP_BITS 9 |
`define OR1200_UPR_TTP_BITS 10 |
`define OR1200_UPR_RES1_BITS 23:11 |
`define OR1200_UPR_FPP_BITS 11 |
`define OR1200_UPR_RES1_BITS 23:12 |
`define OR1200_UPR_CUP_BITS 31:24 |
|
// UPR values |
1546,7 → 1570,11
`else |
`define OR1200_UPR_IMP 1'b1 |
`endif |
`define OR1200_UPR_MP 1'b1 // MAC always present |
`ifdef OR1200_MAC_IMPLEMENTED |
`define OR1200_UPR_MP 1'b1 |
`else |
`define OR1200_UPR_MP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`define OR1200_UPR_DUP 1'b1 |
`else |
1553,27 → 1581,32
`define OR1200_UPR_DUP 1'b0 |
`endif |
`define OR1200_UPR_PCUP 1'b0 // Performance counters not present |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_PM_IMPLEMENTED |
`define OR1200_UPR_PMP 1'b1 |
`else |
`define OR1200_UPR_PMP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_PIC_IMPLEMENTED |
`define OR1200_UPR_PICP 1'b1 |
`else |
`define OR1200_UPR_PICP 1'b0 |
`endif |
`ifdef OR1200_DU_IMPLEMENTED |
`ifdef OR1200_TT_IMPLEMENTED |
`define OR1200_UPR_TTP 1'b1 |
`else |
`define OR1200_UPR_TTP 1'b0 |
`endif |
`define OR1200_UPR_RES1 13'h0000 |
`ifdef OR1200_FPU_IMPLEMENTED |
`define OR1200_UPR_FPP 1'b1 |
`else |
`define OR1200_UPR_FPP 1'b0 |
`endif |
`define OR1200_UPR_RES1 12'h000 |
`define OR1200_UPR_CUP 8'h00 |
|
// CPUCFGR fields |
`define OR1200_CPUCFGR_NSGF_BITS 3:0 |
`define OR1200_CPUCFGR_HGF_BITS 4 |
`define OR1200_CPUCFGR_HGF_BITS 4 |
`define OR1200_CPUCFGR_OB32S_BITS 5 |
`define OR1200_CPUCFGR_OB64S_BITS 6 |
`define OR1200_CPUCFGR_OF32S_BITS 7 |
1582,11 → 1615,20
`define OR1200_CPUCFGR_RES1_BITS 31:10 |
|
// CPUCFGR values |
`define OR1200_CPUCFGR_NSGF 4'h0 |
`define OR1200_CPUCFGR_HGF 1'b0 |
`define OR1200_CPUCFGR_NSGF 4'h0 |
`ifdef OR1200_RFRAM_16REG |
`define OR1200_CPUCFGR_HGF 1'b1 |
`else |
`define OR1200_CPUCFGR_HGF 1'b0 |
`endif |
`define OR1200_CPUCFGR_OB32S 1'b1 |
`define OR1200_CPUCFGR_OB64S 1'b0 |
`define OR1200_CPUCFGR_OF32S 1'b0 |
`ifdef OR1200_FPU_IMPLEMENTED |
`define OR1200_CPUCFGR_OF32S 1'b1 |
`else |
`define OR1200_CPUCFGR_OF32S 1'b0 |
`endif |
|
`define OR1200_CPUCFGR_OF64S 1'b0 |
`define OR1200_CPUCFGR_OV64S 1'b0 |
`define OR1200_CPUCFGR_RES1 22'h000000 |
1617,7 → 1659,7
`define OR1200_DMMUCFGR_NAE 3'h0 // No ATB entries |
`define OR1200_DMMUCFGR_CRI 1'b0 // No control register |
`define OR1200_DMMUCFGR_PRI 1'b0 // No protection reg |
`define OR1200_DMMUCFGR_TEIRI 1'b1 // TLB entry inv reg impl. |
`define OR1200_DMMUCFGR_TEIRI 1'b0 // TLB entry inv reg NOT impl. |
`define OR1200_DMMUCFGR_HTR 1'b0 // No HW TLB reload |
`define OR1200_DMMUCFGR_RES1 20'h00000 |
`endif |
1648,7 → 1690,7
`define OR1200_IMMUCFGR_NAE 3'h0 // No ATB entry |
`define OR1200_IMMUCFGR_CRI 1'b0 // No control reg |
`define OR1200_IMMUCFGR_PRI 1'b0 // No protection reg |
`define OR1200_IMMUCFGR_TEIRI 1'b1 // TLB entry inv reg impl |
`define OR1200_IMMUCFGR_TEIRI 1'b0 // TLB entry inv reg NOT impl |
`define OR1200_IMMUCFGR_HTR 1'b0 // No HW TLB reload |
`define OR1200_IMMUCFGR_RES1 20'h00000 |
`endif |
1672,24 → 1714,32
`define OR1200_DCCFGR_NCS 4'h0 // Irrelevant |
`define OR1200_DCCFGR_CBS 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CWS 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CCRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CBIRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CCRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBIRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBPRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBLRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBFRI 1'b1 // Irrelevant |
`define OR1200_DCCFGR_CBFRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Irrelevant |
`define OR1200_DCCFGR_RES1 17'h00000 |
`else |
`define OR1200_DCCFGR_NCW 3'h0 // 1 cache way |
`define OR1200_DCCFGR_NCS (`OR1200_DCTAG) // Num cache sets |
`define OR1200_DCCFGR_CBS (`OR1200_DCLS-4) // 16 byte cache block |
`define OR1200_DCCFGR_CWS 1'b0 // Write-through strategy |
`define OR1200_DCCFGR_CBS `OR1200_DCLS==4 ? 1'b0 : 1'b1 // 16 byte cache block |
`ifdef OR1200_DC_WRITETHROUGH |
`define OR1200_DCCFGR_CWS 1'b0 // Write-through strategy |
`else |
`define OR1200_DCCFGR_CWS 1'b1 // Write-back strategy |
`endif |
`define OR1200_DCCFGR_CCRI 1'b1 // Cache control reg impl. |
`define OR1200_DCCFGR_CBIRI 1'b1 // Cache block inv reg impl. |
`define OR1200_DCCFGR_CBPRI 1'b0 // Cache block prefetch reg not impl. |
`define OR1200_DCCFGR_CBLRI 1'b0 // Cache block lock reg not impl. |
`define OR1200_DCCFGR_CBFRI 1'b1 // Cache block flush reg impl. |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Cache block WB reg not impl. |
`ifdef OR1200_DC_WRITETHROUGH |
`define OR1200_DCCFGR_CBWBRI 1'b0 // Cache block WB reg not impl. |
`else |
`define OR1200_DCCFGR_CBWBRI 1'b1 // Cache block WB reg impl. |
`endif |
`define OR1200_DCCFGR_RES1 17'h00000 |
`endif |
|
1722,7 → 1772,7
`else |
`define OR1200_ICCFGR_NCW 3'h0 // 1 cache way |
`define OR1200_ICCFGR_NCS (`OR1200_ICTAG) // Num cache sets |
`define OR1200_ICCFGR_CBS (`OR1200_ICLS-4) // 16 byte cache block |
`define OR1200_ICCFGR_CBS `OR1200_ICLS==4 ? 1'b0: 1'b1 // 16 byte cache block |
`define OR1200_ICCFGR_CWS 1'b0 // Irrelevant |
`define OR1200_ICCFGR_CCRI 1'b1 // Cache control reg impl. |
`define OR1200_ICCFGR_CBIRI 1'b1 // Cache block inv reg impl. |
1734,13 → 1784,13
`endif |
|
// DCFGR fields |
`define OR1200_DCFGR_NDP_BITS 2:0 |
`define OR1200_DCFGR_WPCI_BITS 3 |
`define OR1200_DCFGR_RES1_BITS 31:4 |
`define OR1200_DCFGR_NDP_BITS 3:0 |
`define OR1200_DCFGR_WPCI_BITS 4 |
`define OR1200_DCFGR_RES1_BITS 31:5 |
|
// DCFGR values |
`ifdef OR1200_DU_HWBKPTS |
`define OR1200_DCFGR_NDP 3'h`OR1200_DU_DVRDCR_PAIRS // # of DVR/DCR pairs |
`define OR1200_DCFGR_NDP 4'h`OR1200_DU_DVRDCR_PAIRS // # of DVR/DCR pairs |
`ifdef OR1200_DU_DWCR0 |
`define OR1200_DCFGR_WPCI 1'b1 |
`else |
1747,8 → 1797,27
`define OR1200_DCFGR_WPCI 1'b0 // WP counters not impl. |
`endif |
`else |
`define OR1200_DCFGR_NDP 3'h0 // Zero DVR/DCR pairs |
`define OR1200_DCFGR_NDP 4'h0 // Zero DVR/DCR pairs |
`define OR1200_DCFGR_WPCI 1'b0 // WP counters not impl. |
`endif |
`define OR1200_DCFGR_RES1 28'h0000000 |
|
`define OR1200_DCFGR_RES1 27'd0 |
|
/////////////////////////////////////////////////////////////////////////////// |
// Boot Address Selection // |
// // |
// Allows a definable boot address, potentially different to the usual reset // |
// vector to allow for power-on code to be run, if desired. // |
// // |
// OR1200_BOOT_ADR should be the 32-bit address of the boot location // |
// OR1200_BOOT_PCREG_DEFAULT should be ((OR1200_BOOT_ADR-4)>>2) // |
// // |
// For default reset behavior uncomment the settings under the "Boot 0x100" // |
// comment below. // |
// // |
/////////////////////////////////////////////////////////////////////////////// |
// Boot from 0xf0000100 |
//`define OR1200_BOOT_PCREG_DEFAULT 30'h3c00003f |
//`define OR1200_BOOT_ADR 32'hf0000100 |
// Boot from 0x100 |
`define OR1200_BOOT_PCREG_DEFAULT 30'h0000003f |
`define OR1200_BOOT_ADR 32'h00000100 |
/minsoc/branches/rc-1.0/prj/src/blackboxes/or1200_top.v
38,6 → 38,8
pm_clksd_o, pm_dc_gate_o, pm_ic_gate_o, pm_dmmu_gate_o, |
pm_immu_gate_o, pm_tt_gate_o, pm_cpu_gate_o, pm_wakeup_o, pm_lvolt_o |
|
,sig_tick |
|
); |
|
parameter dw = `OR1200_OPERAND_WIDTH; |
141,5 → 143,10
output pm_wakeup_o; |
output pm_lvolt_o; |
|
// |
// CPU and TT |
// |
output sig_tick; // jb |
|
|
endmodule |
/minsoc/branches/rc-1.0/prj/Makefile
16,7 → 16,7
XILINX_XST_FILES = $(addprefix $(XILINX_DIR)/, $(addsuffix .xst, $(basename $(PROJECTS)))) |
|
ALTERA_VERILOG_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .vprj, $(basename $(VERILOG_PROJECTS)))) |
ALTERA_VHDL_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .vhdprj, $(basename $(VHDL_PROJECTS)))) |
ALTERA_VHD_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .vhdprj, $(basename $(VHDL_PROJECTS)))) |
|
all: $(SIMULATION_DIR)/minsoc_verilog.src $(SIMULATION_DIR)/minsoc_vhdl.src $(XILINX_PRJ_FILES) $(XILINX_XST_FILES) $(ALTERA_VERILOG_PRJ_FILES) $(ALTERA_VHDL_PRJ_FILES) |
|