URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 75 to Rev 76
- ↔ Reverse comparison
Rev 75 → Rev 76
/minsoc/trunk/utils/setup/beautify.sh
0,0 → 1,57
#!/bin/bash |
# Xanthopoulos Constantinos |
# Some useful function for my scripts |
|
function cecho |
{ |
echo -e "\033[1m\033[33m$1\033[0m" |
} |
|
function cnecho |
{ |
echo -e -n "\033[0m\033[33m$1\033[0m" |
} |
|
function errormsg |
{ |
echo -e "\033[1m\033[31mError: $1\033[0m\n"; |
exit 1; |
} |
|
function _execcmd |
{ |
# Print Message |
echo -e "\033[35m$1\033[0m" |
# Execute command |
if [ $DEBUG -ne 1 ]; |
then |
eval $2 1>/dev/null; |
fi; |
# Check Execution |
if [ $? -eq 0 ] |
then |
if [ -n "$1" ] |
then |
echo -e "\033[32mSuccessfully \"$1\"\033[0m\n"; |
fi |
else |
errormsg "Command: $2 Description: $1"; |
exit 1; |
|
fi |
} |
|
function execcmd |
{ |
if [ -z "$2" ] |
then |
_execcmd "" "$1" |
else |
_execcmd "$1" "$2" |
fi |
} |
|
if [ $DEBUG -eq 1 ] |
then |
cecho "Debug mode on! Nothing will actually run"; |
fi |
/minsoc/trunk/utils/setup/minsoc-install.sh
0,0 → 1,273
#!/bin/bash |
# Author: Constantinos Xanthopoulos |
# This script install MinSOC tree |
# under a specific directory. |
|
# ===== CONFIGURATIONS ===== |
# ========================== |
|
# Where should I put the dir. minsoc? |
# ex. /home/conx/Thesis/ |
DIR_TO_INSTALL=`pwd` |
|
# This variable should be set to trunk |
# or to stable. |
VERSION="" |
|
# This variable should take one of |
# the following values depending |
# to your system: linux, cygwin, freebsd |
ENV="" |
|
# !!! DO NOT EDIT BELLOW THIS LINE !!! |
# =================================== |
|
# ===== SCRIPT ====== |
# =================== |
|
|
# Debug ? |
export DEBUG=0; |
. beautify.sh |
|
function testtool |
{ |
# is_missing=`which $1 2>&1 | grep no` |
is_missing=`whereis -b $1 2>&1 | grep :$` |
if [ -z "$is_missing" ] |
then |
cecho "$1 is installed, pass" |
else |
errormsg "$1 is not installed, install it and re-run this installation script." |
fi |
} |
|
# User check! |
if [ `whoami` = "root" ]; |
then |
errormsg "You shouldn't be root for this script to run."; |
fi; |
|
# Wizard |
if [ -z "${ALTDIR}" ] |
then |
cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": "; |
read ALTDIR; |
if [ ! -z "${ALTDIR}" ] |
then |
DIR_TO_INSTALL=${ALTDIR} |
fi |
cecho "${DIR_TO_INSTALL} selected"; |
fi |
|
# Directory exists? |
if [ ! -d ${DIR_TO_INSTALL} ] |
then |
errormsg "Directory doesn't exist. Please create it"; |
fi; |
|
cd ${DIR_TO_INSTALL} |
|
|
#setting environment |
ENV=`uname -o` |
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ] |
then |
errormsg "Environment $ENV not supported by this script." |
fi |
cecho "Building tools for ${ENV} system" |
|
|
# Testing necessary tools |
cecho "Testing if necessary tools are installed, program "whereis" is required." |
testtool wget |
testtool svn |
testtool tar |
testtool sed |
testtool patch |
testtool gcc |
testtool make |
testtool libncurses |
if [ "$ENV" == "Cygwin" ] |
then |
testtool ioperm |
testtool libusb |
fi |
|
|
# Which Version? |
if [ -z ${VERSION} ] |
then |
while [ "$VERSION" != "trunk" -a "$VERSION" != "stable" ] |
do |
cnecho "Select MinSOC Version [stable/trunk]: " |
read VERSION; |
done |
fi |
|
|
# Checkout MinSOC |
if [ "${VERSION}" = "trunk" ] |
then |
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc" |
execcmd "cd minsoc/backend/std" |
execcmd "Selecting standard configuration (not synthesizable)" "./configure" |
execcmd "cd ${DIR_TO_INSTALL}" |
else |
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/tags/release-0.9/ minsoc" |
execcmd "cd minsoc/rtl/verilog" |
|
execcmd "Checkout adv_jtag_bridge" "svn co -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk adv_debug_sys" |
execcmd "Checkout ethmac" "svn co -q http://opencores.org/ocsvn/ethmac/ethmac/trunk ethmac" |
execcmd "Checkout openrisc" "svn co -q http://opencores.org/ocsvn/openrisc/openrisc/trunk/or1200 or1200" |
execcmd "Checkout uart" "svn co -q http://opencores.org/ocsvn/uart16550/uart16550/trunk uart16550" |
fi |
|
|
#Tools directory |
if [ ! -d ${DIR_TO_INSTALL}/tools ] |
then |
execcmd "mkdir tools" |
fi; |
|
|
#Installing GDB |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Downloading GDB sources" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2" |
execcmd "Downloading GDB OpenRISC patch" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2" |
execcmd "Downloading GDB Advanced Debug System patch" "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch" |
|
execcmd "Uncompressing GDB" "tar -jxf gdb-6.8.tar.bz2" |
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2" |
execcmd "cd gdb-6.8" |
execcmd "Patching GDB" "patch -p1 < ../or32-gdb-6.8-patch-2.4" |
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch" |
|
execcmd "Compiling GDB" "mkdir b-gdb" |
execcmd "cd b-gdb" |
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools" |
execcmd "make" |
make install #avoid Fedora failing due to missing Makeinfo |
PATH=$PATH:$DIR_TO_INSTALL/tools/bin |
|
|
# Installing the GNU Toolchain |
cecho "Installing the GNU Toolchain" |
|
is_arch64=`uname -m | grep 64` |
if [ -z $is_arch64 ] |
then |
KERNEL_ARCH="32" |
else |
KERNEL_ARCH="64" |
fi |
|
cd $DIR_TO_INSTALL/tools; |
|
if [ "$ENV" == "Cygwin" ] |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-cygwin-1.7.tar.bz2"; |
else |
if [ $KERNEL_ARCH == "32" ]; |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-linux-x86.tar.bz2"; |
elif [ $KERNEL_ARCH == "64" ]; |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-linux-x86_64.tar.bz2"; |
else |
errormsg "Not a correct architecture, $KERNEL_ARCH. Check Configurations"; |
fi |
fi |
|
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin |
|
|
# Preparing MinSoC Specifics |
cecho "I will now start to compile everything that's needed"; |
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils" |
execcmd "Make utils" "make" |
|
execcmd "cd ../support" |
execcmd "Make support tools" "make" |
|
execcmd "cd ../drivers" |
execcmd "Make drivers" "make" |
|
execcmd "cd ../uart" |
execcmd "Make UART" "make" |
|
|
# adv_jtag_bridge install |
if [ "$ENV" != "Cygwin" ] |
then |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Acquiring libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz" |
execcmd "tar zxf libusb-0.1.12.tar.gz" |
execcmd "cd libusb-0.1.12" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "make install" |
fi |
|
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Acquiring libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz" |
execcmd "tar zxf libftdi-0.19.tar.gz" |
execcmd "cd libftdi-0.19" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "make install" |
|
execcmd "Compiling Advanced JTAG Bridge" "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge" |
|
if [ `grep "INCLUDE_JSP_SERVER=true" Makefile` != "" ] |
then |
cecho "Switching off the adv_jtag_bridge JSP_SERVER option"; |
sed 's/INCLUDE_JSP_SERVER=true/INCLUDE_JSP_SERVER=false/' Makefile > TMPFILE && mv TMPFILE Makefile |
fi |
|
if [ "${ENV}" == "GNU/Linux" ] |
then |
cecho "Setting the right build environment"; |
sed 's/BUILD_ENVIRONMENT=cygwin/BUILD_ENVIRONMENT=linux/' Makefile > TMPFILE && mv TMPFILE Makefile |
fi |
|
sed "s%prefix = /usr/local%prefix = ${DIR_TO_INSTALL}/tools%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%\$(CC) \$(CFLAGS)%\$(CC) \$(CFLAGS) \$(INCLUDEDIRS)%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%INCLUDEDIRS =%INCLUDEDIRS = -I${DIR_TO_INSTALL}/tools/include%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%LIBS =%LIBS = -L${DIR_TO_INSTALL}/tools/lib%" Makefile > TMPFILE && mv TMPFILE Makefile |
|
execcmd "Make adv_jtag_bridge" "make" |
execcmd "Installing adv_jtag_bridge" "make install" |
|
|
#install extra tools |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
|
execcmd "Acquiring Icarus Verilog Tool" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz" |
execcmd "tar zxf verilog-0.9.4.tar.gz" |
execcmd "cd verilog-0.9.4" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "make install" |
|
|
#Configuring Advanced Debug System to work with MinSoC |
cecho "Configuring Advanced Debug System to work with MinSoC" |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog" |
sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v |
|
cecho "Compiling and moving adv_jtag_bridge debug modules for simulation" |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus" |
execcmd "make" |
execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi" |
|
|
#trying to set-up new variables |
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;"; |
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\" >> /home/$(whoami)/.bashrc;"; |
cecho "Installation Finished" |
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc" |
minsoc/trunk/utils/setup/minsoc-install.sh
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: minsoc/trunk/utils/setup/required-cygwin-tools.txt
===================================================================
--- minsoc/trunk/utils/setup/required-cygwin-tools.txt (nonexistent)
+++ minsoc/trunk/utils/setup/required-cygwin-tools.txt (revision 76)
@@ -0,0 +1,8 @@
+packages:
+util-linux (for whereis)
+wget
+gcc
+make
+libncurses-devel
+ioperm
+libusb-win32
\ No newline at end of file
minsoc/trunk/utils/setup/required-cygwin-tools.txt
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property