OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /minsoc
    from Rev 116 to Rev 115
    Reverse comparison

Rev 116 → Rev 115

/branches/rc-1.0/backend/spartan3e_starter_kit/configure
65,33 → 65,15
echo ""
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
115,8 → 97,21
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
rm TMPFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo ""
echo ""
fi
echo ""
echo ""
 
echo "Configuration done."
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
/branches/rc-1.0/backend/spartan3e_starter_kit_eth/configure
66,33 → 66,15
echo ""
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
116,8 → 98,21
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
rm TMPFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo ""
echo ""
fi
echo ""
echo ""
 
echo "Configuration done."
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
/branches/rc-1.0/backend/altera_3c25_board/configure
52,31 → 52,15
echo ""
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
 
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part and family for files under $SYNSRC_DIR will patched and stored "
echo "temporarily."
104,9 → 88,21
echo "Copying Makefile from $MAKEFILE_DIR to synthesis directory, $SYN_DIR..."
cp $MAKEFILE_DIR/$MAKEFILE $SYN_DIR/$MAKEFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo "For synthesis help go to $SYN_DIR and type \"make\"."
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo "Configuration done."
echo "For synthesis help go to $SYN_DIR and type \"make\"."
fi
 
echo "Configuration done."
/branches/rc-1.0/backend/spartan3a_dsp_kit/configure
34,7 → 34,7
echo "Possibly your minsoc directory is named differently, minsoc_trunk for example."
echo "Its name must be minsoc only."
echo ""
exit 1
exit 1
fi
 
echo ""
47,33 → 47,15
echo ""
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
97,8 → 79,21
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
rm TMPFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo ""
echo ""
fi
echo ""
echo ""
 
echo "Configuration done."
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
/branches/rc-1.0/backend/std/configure
47,33 → 47,15
echo ""
echo ""
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
echo "__________________________________________________________________________"
echo ""
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
echo ""
echo ""
else
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
97,8 → 79,21
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
rm TMPFILE
cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
echo ""
echo ""
fi
echo ""
echo ""
 
echo "Configuration done."
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
do
if [ $file != NONE ]
then
echo "Copying $file, to backend directory..."
cp $BOARD_DIR/$file $BACKEND_DIR
fi
done
echo ""
echo ""

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.