OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /
    from Rev 96 to Rev 97
    Reverse comparison

Rev 96 → Rev 97

/minsoc/trunk/backend/spartan3a_dsp_kit/configure
38,20 → 38,28
fi
 
echo ""
echo "Configuring SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis."
echo "Firmware and testbench looks for board specific files under minsoc/backend."
echo "Synthesis work under minsoc/syn."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part for files under minsoc/prj/xilinx will be patched and stored "
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to minsoc/syn/buildSupport."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
for file in "${SYN_FILES[@]}"
64,8 → 72,8
rm TMPFILE
done
 
echo "Updating Makefile file..."
echo "Copying Makefile to synthesis directory..."
echo "Updating Makefile file under $MAKEFILE_DIR..."
echo "Copying Makefile to synthesis directory, $SYN_DIR..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$MAKEFILE > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
75,7 → 83,7
echo ""
 
 
echo "Copying board specific SoC files to backend directory."
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
/minsoc/trunk/backend/std/configure
38,20 → 38,28
fi
 
echo ""
echo "Configuring SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis."
echo "Firmware and testbench looks for board specific files under minsoc/backend."
echo "Synthesis work under minsoc/syn."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part for files under minsoc/prj/xilinx will be patched and stored "
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to minsoc/syn/buildSupport."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
for file in "${SYN_FILES[@]}"
64,8 → 72,8
rm TMPFILE
done
 
echo "Updating Makefile file..."
echo "Copying Makefile to synthesis directory..."
echo "Updating Makefile file under $MAKEFILE_DIR..."
echo "Copying Makefile to synthesis directory, $SYN_DIR..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$MAKEFILE > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
75,7 → 83,7
echo ""
 
 
echo "Copying board specific SoC files to backend directory."
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
/minsoc/trunk/backend/altera_3c25_board/configure
43,20 → 43,28
fi
 
echo ""
echo "Configuring SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis."
echo "Firmware and testbench looks for board specific files under minsoc/backend."
echo "Synthesis work under minsoc/syn."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part and family for qsf file under $MAKEFILE_DIR will patched and stored "
echo "Device part and family for files under $SYNSRC_DIR will patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to minsoc/syn/buildSupport."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$PROJECT_FILE > TMPFILE
77,11 → 85,11
echo "Generated quartus settings file in $SYNSUPPORT_DIR/$PROJECT_FILE"
echo ""
 
echo "Copying Makefile to synthesis directory..."
echo "Copying Makefile from $MAKEFILE_DIR to synthesis directory, $SYN_DIR..."
cp $MAKEFILE_DIR/$MAKEFILE $SYN_DIR/$MAKEFILE
echo ""
 
echo "Copying board specific SoC files to backend directory."
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
/minsoc/trunk/backend/spartan3e_starter_kit/configure
56,20 → 56,28
#~NON STANDARD SCRIPT PART
 
echo ""
echo "Configuring SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis."
echo "Firmware and testbench looks for board specific files under minsoc/backend."
echo "Synthesis work under minsoc/syn."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part for files under minsoc/prj/xilinx will be patched and stored "
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to minsoc/syn/buildSupport."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
for file in "${SYN_FILES[@]}"
82,8 → 90,8
rm TMPFILE
done
 
echo "Updating Makefile file..."
echo "Copying Makefile to synthesis directory..."
echo "Updating Makefile file under $MAKEFILE_DIR..."
echo "Copying Makefile to synthesis directory, $SYN_DIR..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$MAKEFILE > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
93,7 → 101,7
echo ""
 
 
echo "Copying board specific SoC files to backend directory."
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"
/minsoc/trunk/backend/spartan3e_starter_kit_eth/configure
57,20 → 57,28
#~NON STANDARD SCRIPT PART
 
echo ""
echo "Configuring SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis."
echo "Firmware and testbench looks for board specific files under minsoc/backend."
echo "Synthesis work under minsoc/syn."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
 
echo "Generating project files for simulation and synthesis..."
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
 
if [ $CONSTRAINT_FILE == 'NONE' ]
then
echo "Skipping synthesis preparation. Standard implementation can only be simulated."
else
echo "Device part for files under minsoc/prj/xilinx will be patched and stored "
echo "Device part for files under $SYNSRC_DIR will be patched and stored "
echo "temporarily."
echo "Afterwards, they are copied to minsoc/syn/buildSupport."
echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
echo "__________________________________________________________________________"
echo ""
for file in "${SYN_FILES[@]}"
83,8 → 91,8
rm TMPFILE
done
 
echo "Updating Makefile file..."
echo "Copying Makefile to synthesis directory..."
echo "Updating Makefile file under $MAKEFILE_DIR..."
echo "Copying Makefile to synthesis directory, $SYN_DIR..."
echo ""
sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$MAKEFILE > TMPFILE
sed "s/$FIND_CONSTRAINT/$CONSTRAINT_FILE/g" TMPFILE > TMPFILE2 && mv TMPFILE2 $SYN_DIR/$MAKEFILE
94,7 → 102,7
echo ""
 
 
echo "Copying board specific SoC files to backend directory."
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
echo "__________________________________________________________________________"
echo ""
for file in "${BOARD_FILES[@]}"

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.