URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
Compare Revisions
- This comparison shows the changes necessary to convert path
/minsoc/trunk/utils
- from Rev 79 to Rev 81
- ↔ Reverse comparison
Rev 79 → Rev 81
/setup/beautify.sh
5,16 → 5,19
function cecho |
{ |
echo -e "\033[1m\033[33m$1\033[0m" |
echo -e "\033[1m\033[33m$1\033[0m" >> ${DIR_TO_INSTALL}/progress.log |
} |
|
function cnecho |
{ |
echo -e -n "\033[0m\033[33m$1\033[0m" |
echo -e -n "\033[0m\033[33m$1\033[0m" >> ${DIR_TO_INSTALL}/progress.log |
} |
|
function errormsg |
{ |
echo -e "\033[1m\033[31mError: $1\033[0m\n"; |
echo -e "\033[1m\033[31mError: $1\033[0m\n" >> ${DIR_TO_INSTALL}/error.log |
exit 1; |
} |
|
21,11 → 24,15
function _execcmd |
{ |
# Print Message |
echo -e "\033[35m$1\033[0m" |
echo -e "\033[35m$1...\033[0m\n" >> ${DIR_TO_INSTALL}/progress.log |
if [ -n "$1" ] |
then |
echo -e -n "\033[35m$1...\033[0m" |
fi |
# Execute command |
if [ $DEBUG -ne 1 ]; |
then |
eval $2 1>/dev/null; |
eval $2 1>>${DIR_TO_INSTALL}/progress.log 2>>${DIR_TO_INSTALL}/error.log; |
fi; |
# Check Execution |
if [ $? -eq 0 ] |
32,12 → 39,12
then |
if [ -n "$1" ] |
then |
echo -e "\033[32mSuccessfully \"$1\"\033[0m\n"; |
echo -e "\033[32mcomplete\033[0m"; |
echo -e "\033[32mcomplete\033[0m" >> ${DIR_TO_INSTALL}/progress.log |
fi |
else |
errormsg "Command: $2 Description: $1"; |
exit 1; |
|
fi |
} |
|
/setup/minsoc-install.sh
48,36 → 48,7
errormsg "You shouldn't be root for this script to run."; |
fi; |
|
# Wizard |
if [ -z "${ALTDIR}" ] |
then |
cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": "; |
read ALTDIR; |
if [ ! -z "${ALTDIR}" ] |
then |
DIR_TO_INSTALL=${ALTDIR} |
fi |
cecho "${DIR_TO_INSTALL} selected"; |
fi |
|
# Directory exists? |
if [ ! -d ${DIR_TO_INSTALL} ] |
then |
errormsg "Directory doesn't exist. Please create it"; |
fi; |
|
cd ${DIR_TO_INSTALL} |
|
|
#setting environment |
ENV=`uname -o` |
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ] |
then |
errormsg "Environment $ENV not supported by this script." |
fi |
cecho "Building tools for ${ENV} system" |
|
|
# Testing necessary tools |
cecho "Testing if necessary tools are installed, program "whereis" is required." |
testtool wget |
97,65 → 68,32
fi |
|
|
# Which Version? |
if [ -z ${VERSION} ] |
# Wizard |
if [ -z "${ALTDIR}" ] |
then |
while [ "$VERSION" != "trunk" -a "$VERSION" != "stable" ] |
do |
cnecho "Select MinSOC Version [stable/trunk]: " |
read VERSION; |
done |
cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": "; |
read ALTDIR; |
if [ ! -z "${ALTDIR}" ] |
then |
DIR_TO_INSTALL=${ALTDIR} |
fi |
cecho "${DIR_TO_INSTALL} selected"; |
fi |
|
|
# Checkout MinSOC |
if [ "${VERSION}" = "trunk" ] |
if [ ! -d ${DIR_TO_INSTALL} ] |
then |
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc" |
execcmd "cd minsoc/backend/std" |
execcmd "Selecting standard configuration (not synthesizable)" "./configure" |
execcmd "cd ${DIR_TO_INSTALL}" |
else |
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/tags/release-0.9/ minsoc" |
execcmd "cd minsoc/rtl/verilog" |
errormsg "Directory doesn't exist. Please create it"; |
fi; |
|
execcmd "Checkout adv_jtag_bridge" "svn co -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk adv_debug_sys" |
execcmd "Checkout ethmac" "svn co -q http://opencores.org/ocsvn/ethmac/ethmac/trunk ethmac" |
execcmd "Checkout openrisc" "svn co -q http://opencores.org/ocsvn/openrisc/openrisc/trunk/or1200 or1200" |
execcmd "Checkout uart" "svn co -q http://opencores.org/ocsvn/uart16550/uart16550/trunk uart16550" |
fi |
|
|
#Tools directory |
if [ ! -d ${DIR_TO_INSTALL}/tools ] |
#Setting environment |
ENV=`uname -o` |
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ] |
then |
execcmd "mkdir tools" |
fi; |
errormsg "Environment $ENV not supported by this script." |
fi |
cecho "Building tools for ${ENV} system" |
|
|
#Installing GDB |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Downloading GDB sources" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2" |
execcmd "Downloading GDB OpenRISC patch" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2" |
execcmd "Downloading GDB Advanced Debug System patch" "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch" |
|
execcmd "Uncompressing GDB" "tar -jxf gdb-6.8.tar.bz2" |
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2" |
execcmd "cd gdb-6.8" |
execcmd "Patching GDB" "patch -p1 < ../or32-gdb-6.8-patch-2.4" |
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch" |
|
execcmd "Compiling GDB" "mkdir b-gdb" |
execcmd "cd b-gdb" |
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools" |
execcmd "make" |
make install #avoid Fedora failing due to missing Makeinfo |
PATH=$PATH:$DIR_TO_INSTALL/tools/bin |
|
|
# Installing the GNU Toolchain |
cecho "Installing the GNU Toolchain" |
|
is_arch64=`uname -m | grep 64` |
if [ -z $is_arch64 ] |
then |
164,112 → 102,172
KERNEL_ARCH="64" |
fi |
|
cd $DIR_TO_INSTALL/tools; |
|
#Creating directory structure |
cecho "\nCreating directory structure" |
cd ${DIR_TO_INSTALL} |
execcmd "Creating directory ./download for downloaded packages" "mkdir -p download" |
execcmd "Creating directory ./tools for package binaries" "mkdir -p tools" |
|
|
#Downloading everything we need |
cecho "\nDownloading packages" |
cd ${DIR_TO_INSTALL} |
cecho "Download MinSoC" |
svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc #user need to input password, execcmd omits command output and should be this way |
execcmd "cd ${DIR_TO_INSTALL}/download" |
if [ "$ENV" == "Cygwin" ] |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-cygwin-1.7.tar.bz2"; |
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2"; |
else |
if [ $KERNEL_ARCH == "32" ]; |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-linux-x86.tar.bz2"; |
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2"; |
elif [ $KERNEL_ARCH == "64" ]; |
then |
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2"; |
execcmd "Un-tar" "tar xf or32-elf-linux-x86_64.tar.bz2"; |
else |
errormsg "Not a correct architecture, $KERNEL_ARCH. Check Configurations"; |
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2"; |
fi |
fi |
execcmd "Downloading GDB" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2" |
execcmd "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2" |
execcmd "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch" |
if [ "$ENV" != "Cygwin" ] |
then |
execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz" |
fi |
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz" |
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz" |
|
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin |
|
#Uncompressing everything |
cecho "\nUncompressing packages" |
if [ "$ENV" == "Cygwin" ] |
then |
execcmd "tar xf or32-elf-cygwin-1.7.tar.bz2"; |
else |
if [ $KERNEL_ARCH == "32" ]; |
then |
execcmd "tar xf or32-elf-linux-x86.tar.bz2"; |
elif [ $KERNEL_ARCH == "64" ]; |
then |
execcmd "tar xf or32-elf-linux-x86_64.tar.bz2"; |
fi |
fi |
execcmd "tar -jxf gdb-6.8.tar.bz2" |
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2" |
if [ "$ENV" != "Cygwin" ] |
then |
execcmd "tar zxf libusb-0.1.12.tar.gz" |
fi |
execcmd "tar zxf libftdi-0.19.tar.gz" |
execcmd "tar zxf verilog-0.9.4.tar.gz" |
|
# Preparing MinSoC Specifics |
cecho "I will now start to compile everything that's needed"; |
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils" |
execcmd "Make utils" "make" |
#Compiling and Installing all packages |
cecho "\nCompiling and installing packages" |
# Installing the GNU Toolchain |
execcmd "Installing GNU Toolchain" "cp -Rp or32-elf $DIR_TO_INSTALL/tools" |
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin |
|
execcmd "cd ../support" |
execcmd "Make support tools" "make" |
|
execcmd "cd ../drivers" |
execcmd "Make drivers" "make" |
#Installing GDB |
execcmd "cd gdb-6.8" |
execcmd "patch -p1 < ../or32-gdb-6.8-patch-2.4" |
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch" |
|
execcmd "cd ../uart" |
execcmd "Make UART" "make" |
execcmd "mkdir -p build" |
execcmd "cd build" |
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools" |
execcmd "Compiling GDB" "make" |
make install 1>>${DIR_TO_INSTALL}/progress.log 2>>${DIR_TO_INSTALL}/error.log #avoid Fedora failing due to missing Makeinfo |
PATH=$PATH:${DIR_TO_INSTALL}/tools/bin |
|
|
# adv_jtag_bridge install |
#Installing Advanced JTAG Bridge support libraries |
if [ "$ENV" != "Cygwin" ] |
then |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Acquiring libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz" |
execcmd "tar zxf libusb-0.1.12.tar.gz" |
execcmd "cd libusb-0.1.12" |
execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "Installing libusb-0.1" "make" |
execcmd "make install" |
fi |
|
execcmd "cd ${DIR_TO_INSTALL}/tools" |
execcmd "Acquiring libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz" |
execcmd "tar zxf libftdi-0.19.tar.gz" |
execcmd "cd libftdi-0.19" |
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "Compiling libftdi" "make" |
execcmd "make install" |
|
execcmd "Compiling Advanced JTAG Bridge" "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge" |
|
#Installing Advanced JTAG Bridge |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge" |
if [ `grep "INCLUDE_JSP_SERVER=true" Makefile` != "" ] |
then |
cecho "Switching off the adv_jtag_bridge JSP_SERVER option"; |
#Switching off the adv_jtag_bridge JSP_SERVER option |
sed 's/INCLUDE_JSP_SERVER=true/INCLUDE_JSP_SERVER=false/' Makefile > TMPFILE && mv TMPFILE Makefile |
fi |
|
if [ "${ENV}" == "GNU/Linux" ] |
then |
cecho "Setting the right build environment"; |
#Setting the right build environment |
sed 's/BUILD_ENVIRONMENT=cygwin/BUILD_ENVIRONMENT=linux/' Makefile > TMPFILE && mv TMPFILE Makefile |
fi |
|
#preparing the Makefile to find and link libraries |
sed "s%prefix = /usr/local%prefix = ${DIR_TO_INSTALL}/tools%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%\$(CC) \$(CFLAGS)%\$(CC) \$(CFLAGS) \$(INCLUDEDIRS)%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%INCLUDEDIRS =%INCLUDEDIRS = -I${DIR_TO_INSTALL}/tools/include%" Makefile > TMPFILE && mv TMPFILE Makefile |
sed "s%LIBS =%LIBS = -L${DIR_TO_INSTALL}/tools/lib -Wl,-R${DIR_TO_INSTALL}/tools/lib%" Makefile > TMPFILE && mv TMPFILE Makefile |
|
execcmd "Make adv_jtag_bridge" "make" |
execcmd "Installing adv_jtag_bridge" "make install" |
#properly installing Advanced JTAG Bridge |
execcmd "Compiling Advanced JTAG Bridge" "make" |
execcmd "make install" |
|
|
#install extra tools |
execcmd "cd ${DIR_TO_INSTALL}/tools" |
|
execcmd "Acquiring Icarus Verilog Tool" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz" |
execcmd "tar zxf verilog-0.9.4.tar.gz" |
execcmd "cd verilog-0.9.4" |
#Installing Icarus Verilog |
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4" |
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools" |
execcmd "make" |
execcmd "Compiling Icarus Verilog" "make" |
execcmd "make install" |
|
|
#Configuring MinSoC |
cecho "\nConfiguring MinSoC" |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/backend/std" |
execcmd "Configuring MinSoC as standard board (simulatable but not synthesizable)" "./configure" |
execcmd "cd ${DIR_TO_INSTALL}" |
|
|
#Configuring Advanced Debug System to work with MinSoC |
cecho "Configuring Advanced Debug System to work with MinSoC" |
cecho "\nConfiguring Advanced Debug System to work with MinSoC" |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog" |
sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v |
|
cecho "Compiling and moving adv_jtag_bridge debug modules for simulation" |
#Compiling and moving adv_jtag_bridge debug modules for simulation |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus" |
execcmd "make" |
execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi" |
|
|
#trying to set-up new variables |
#Precompiling firmwares |
cecho "\nPrecompiling delivered firmwares"; |
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils" |
execcmd "Make utils" "make" |
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/support" |
execcmd "Make support tools" "make" |
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/drivers" |
execcmd "Make drivers" "make" |
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/uart" |
execcmd "Make UART" "make" |
|
|
#Setting-up new variables |
cecho "\nSystem configurations" |
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;"; |
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\" >> /home/$(whoami)/.bashrc;"; |
cecho "Installation Finished" |
|
cecho "\nInstallation Complete!" |
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc" |
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish." |
/setup/required-cygwin-tools.txt
1,6 → 1,8
packages: |
util-linux (for whereis) |
wget |
subversion |
patch |
gcc |
make |
libncurses-devel |