URL
https://opencores.org/ocsvn/mjpeg-decoder/mjpeg-decoder/trunk
Subversion Repositories mjpeg-decoder
Compare Revisions
- This comparison shows the changes necessary to convert path
/mjpeg-decoder
- from Rev 7 to Rev 8
- ↔ Reverse comparison
Rev 7 → Rev 8
/trunk/mjpeg/pcores/myipif/hdl/vhdl/jpeg_dezigzag.vhd
247,7 → 247,7
-- sr_out(02) <= sr_in(05); |
-- sr_out(03) <= sr_in(06); |
-- sr_out(04) <= sr_in(14); |
-- sr_out(05) <= sr_in(17); |
-- sr_out(05) <= sr_in(15); |
-- sr_out(06) <= sr_in(27); |
-- sr_out(07) <= sr_in(28); |
-- sr_out(08) <= sr_in(02); |
313,7 → 313,7
sr_out(16) <= sr_in(05); |
sr_out(24) <= sr_in(06); |
sr_out(32) <= sr_in(14); |
sr_out(40) <= sr_in(17); |
sr_out(40) <= sr_in(15); |
sr_out(48) <= sr_in(27); |
sr_out(56) <= sr_in(28); |
sr_out(01) <= sr_in(02); |
/trunk/mjpeg/etc/bitgen.ut
0,0 → 1,20
-g CclkPin:PULLUP |
-g TdoPin:PULLNONE |
-g M1Pin:PULLDOWN |
-g DonePin:PULLUP |
-g DriveDone:No |
-g StartUpClk:JTAGCLK |
-g DONE_cycle:4 |
-g GTS_cycle:5 |
-g M0Pin:PULLUP |
-g M2Pin:PULLUP |
-g ProgPin:PULLUP |
-g TckPin:PULLUP |
-g TdiPin:PULLUP |
-g TmsPin:PULLUP |
-g DonePipe:No |
-g GWE_cycle:6 |
-g LCK_cycle:NoWait |
-g Security:NONE |
#-m |
-g Persist:No |
/trunk/mjpeg/etc/fast_runtime.opt
0,0 → 1,80
FLOWTYPE = FPGA; |
############################################################### |
## Filename: fast_runtime.opt |
## |
## Option File For Xilinx FPGA Implementation Flow for Fast |
## Runtime. |
## |
## Version: 4.1.1 |
############################################################### |
# |
# Options for Translator |
# |
# Type "ngdbuild -h" for a detailed list of ngdbuild command line options |
# |
Program ngdbuild |
-p <partname>; # Partname to use - picked from xflow commandline |
-nt timestamp; # NGO File generation. Regenerate only when |
# source netlist is newer than existing |
# NGO file (default) |
-bm <design>.bmm # Block RAM memory map file |
<userdesign>; # User design - pick from xflow command line |
-uc <design>.ucf; # ucf constraints |
<design>.ngd; # Name of NGD file. Filebase same as design filebase |
End Program ngdbuild |
|
# |
# Options for Mapper |
# |
# Type "map -h <arch>" for a detailed list of map command line options |
# |
Program map |
-o <design>_map.ncd; # Output Mapped ncd file |
-pr b; # Pack internal FF/latches into IOBs |
#-fp <design>.mfp; # Floorplan file |
<inputdir><design>.ngd; # Input NGD file |
<inputdir><design>.pcf; # Physical constraints file |
END Program map |
|
# |
# Options for Post Map Trace |
# |
# Type "trce -h" for a detailed list of trce command line options |
# |
Program post_map_trce |
-e 3; # Produce error report limited to 3 items per constraint |
#-o <design>_map.twr; # Output trace report file |
-xml <design>_map.twx; # Output XML version of the timing report |
#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report |
<inputdir><design>_map.ncd; # Input mapped ncd |
<inputdir><design>.pcf; # Physical constraints file |
END Program post_map_trce |
|
# |
# Options for Place and Route |
# |
# Type "par -h" for a detailed list of par command line options |
# |
Program par |
-w; # Overwrite existing placed and routed ncd |
-ol std; # Overall effort level |
<inputdir><design>_map.ncd; # Input mapped NCD file |
<design>.ncd; # Output placed and routed NCD |
<inputdir><design>.pcf; # Input physical constraints file |
END Program par |
|
# |
# Options for Post Par Trace |
# |
# Type "trce -h" for a detailed list of trce command line options |
# |
Program post_par_trce |
-e 3; # Produce error report limited to 3 items per constraint |
#-o <design>.twr; # Output trace report file |
-xml <design>.twx; # Output XML version of the timing report |
#-tsi <design>.tsi; # Produce Timing Specification Interaction report |
<inputdir><design>.ncd; # Input placed and routed ncd |
<inputdir><design>.pcf; # Physical constraints file |
END Program post_par_trce |
|
|
/trunk/mjpeg/etc/download.cmd
0,0 → 1,6
setMode -bscan |
setCable -p auto |
identify |
assignfile -p 3 -file implementation/download.bit |
program -p 3 |
quit |