URL https://opencores.org/ocsvn/16x2_lcd_controller/16x2_lcd_controller/trunk

Subversion Repositories 16x2_lcd_controller

[/] [16x2_lcd_controller/] [trunk/] [demo/] [readme.txt] - Diff between revs 8 and 9

Rev 8	Rev 9
`How to run the demo:`	`How to run the demo:`
`- create a new project in the ISE project navigator`	`- create a new project in the ISE project navigator`
`- add files (Project>Add Source):`	`- add files (Project>Add Source):`
`+ lcd16x2_ctrl.vhd`	`+ lcd16x2_ctrl.vhd`
`+ lcd16x2_ctrl_demo.vhd`	`+ lcd16x2_ctrl_demo.vhd`
`+ pin_locations.ucf`	`+ pin_locations.ucf`
`- if you use the ML501 board you can leave pin_locations.ucf unchanged, otherwise you`	`- if you use the ML501 board you can leave pin_locations.ucf unchanged, otherwise you`
`have to adjust the locations for your board (see your board's schematics)`	`have to adjust the locations for your board (see your board's schematics)`
	`- open the file lcd16x2_ctrl_demo.vhd and adjust the constant CLK_PERIOD_NS (clock period in nanoseconds)`
	`in case your board's oscillator frequency differs from 100MHz. Again, nothing needs to be done for`
	`the ML501 board.`
`- implement the design and program FPGA`	`- implement the design and program FPGA`