-----
|
-----
|
FILES
|
FILES
|
-----
|
-----
|
|
|
readme.txt This file
|
readme.txt This file
|
simple_calculator.asm A simple calculator program which I use to test RISCMCU
|
simple_calculator.asm A simple calculator program which I use to test RISCMCU
|
memory_game.asm A simple memory game which I use to test RISCMCU
|
memory_game.asm A simple memory game which I use to test RISCMCU
|
riscmcu.inc AVR Assembler include file for this RISCMCU
|
riscmcu.inc AVR Assembler include file for this RISCMCU
|
riscmcu.aio AVR Studio I/O View setting file for RISCMCU
|
riscmcu.aio AVR Studio I/O View setting file for RISCMCU
|
counter.asm Simulation DEMO program for RISCMCU, which is
|
counter.asm Simulation DEMO program for RISCMCU, which is
|
the program contains in program.mif in the vhdl directory
|
the program contains in program.mif in the vhdl directory
|
and the program the MCU run in the simulation waveform (simulation directory)
|
and the program the MCU run in the simulation waveform (simulation directory)
|
counter.lst List file for counter.asm
|
counter.lst List file for counter.asm
|
|
|
|
|
|
|
-----------------
|
-----------------
|
AVR Assember 1.30
|
AVR Assember 1.30
|
-----------------
|
-----------------
|
|
|
Click on 'Options...' Menu
|
Click on 'Options...' Menu
|
1. Select 'Generic Format' under the Output file format (MUST for HEX2MIF to work!)
|
1. Select 'Generic Format' under the Output file format (MUST for HEX2MIF to work!)
|
2. Check the 'Save before assemble' box.
|
2. Check the 'Save before assemble' box.
|
|
|
riscmcu.inc Include File for *.ASM (I/O register and bit definition for this design)
|
riscmcu.inc Include File for *.ASM (I/O register and bit definition for this design)
|
|
|
With an ASM file and the riscmcu.inc file, AVR Assembler generates
|
With an ASM file and the riscmcu.inc file, AVR Assembler generates
|
|
|
*.hex Hex file : used by HEX2MIF
|
*.hex Hex file : used by HEX2MIF
|
*.lst Listing file
|
*.lst Listing file
|
*.obj Object file : used by AVR Studio for simulation
|
*.obj Object file : used by AVR Studio for simulation
|
|
|
|
|
--------------
|
--------------
|
AVR Studio 3.0
|
AVR Studio 3.0
|
--------------
|
--------------
|
|
|
Open the OBJ file, set
|
Open the OBJ file, set
|
|
|
Prog.Memory 512
|
Prog.Memory 512
|
Data Memory 256*
|
Data Memory 256*
|
EEPROM 0
|
EEPROM 0
|
I/O Size 64
|
I/O Size 64
|
Hardware Stack check
|
Hardware Stack check
|
Levels 4
|
Levels 4
|
Map I/O in Data Area check
|
Map I/O in Data Area check
|
Frequency any
|
Frequency any
|
|
|
You can go to Simulator Options (under Options menu) to set this anytime.
|
You can go to Simulator Options (under Options menu) to set this anytime.
|
|
|
Then press
|
Then press
|
ALT-0 Registers View
|
ALT-0 Registers View
|
ALT-4 New Memory View
|
ALT-4 New Memory View
|
ALT-5 New I/O View, choose riscmcu.aio
|
ALT-5 New I/O View, choose riscmcu.aio
|
|
|
* The design only have 128 bytes of data RAM, but the simulator can not display the 128 locations when I put 128. 256 works, just ignored anything after the valid 128 byes.
|
* The design only have 128 bytes of data RAM, but the simulator can not display the 128 locations when I put 128. 256 works, just ignored anything after the valid 128 byes.
|
|
|
|
|
|
|
|
|
|
|
|
|
