/* adv_jtag_bridge.c -- JTAG protocol bridge between GDB and Advanced debug module.
|
/* adv_jtag_bridge.c -- JTAG protocol bridge between GDB and Advanced debug module.
|
Copyright(C) 2001 Marko Mlinar, markom@opencores.org
|
Copyright(C) 2001 Marko Mlinar, markom@opencores.org
|
Code for TCP/IP copied from gdb, by Chris Ziomkowski
|
Code for TCP/IP copied from gdb, by Chris Ziomkowski
|
Refactoring by Nathan Yawn, nyawn@opencores.org
|
Refactoring by Nathan Yawn, nyawn@opencores.org
|
|
|
This file was part of the OpenRISC 1000 Architectural Simulator.
|
This file was part of the OpenRISC 1000 Architectural Simulator.
|
It is now also used to connect GDB to a running hardware OpenCores / OR1200
|
It is now also used to connect GDB to a running hardware OpenCores / OR1200
|
advanced debug unit.
|
advanced debug unit.
|
|
|
This program is free software; you can redistribute it and/or modify
|
This program is free software; you can redistribute it and/or modify
|
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
the Free Software Foundation; either version 2 of the License, or
|
the Free Software Foundation; either version 2 of the License, or
|
(at your option) any later version.
|
(at your option) any later version.
|
|
|
This program is distributed in the hope that it will be useful,
|
This program is distributed in the hope that it will be useful,
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
GNU General Public License for more details.
|
GNU General Public License for more details.
|
|
|
You should have received a copy of the GNU General Public License
|
You should have received a copy of the GNU General Public License
|
along with this program; if not, write to the Free Software
|
along with this program; if not, write to the Free Software
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
/* Establishes jtag proxy server and communicates with parallel
|
/* Establishes jtag proxy server and communicates with parallel
|
port directly. Requires root access. */
|
port directly. Requires root access. */
|
|
|
#include <stdio.h>
|
#include <stdio.h>
|
#include <stdlib.h> // for exit(), atoi(), strtoul()
|
#include <stdlib.h> // for exit(), atoi(), strtoul()
|
#include <unistd.h>
|
#include <unistd.h>
|
#include <stdarg.h>
|
#include <stdarg.h>
|
#include <string.h> // for strstr()
|
#include <string.h> // for strstr()
|
#include <sys/types.h>
|
#include <sys/types.h>
|
|
|
|
|
#include "adv_jtag_bridge.h"
|
#include "adv_jtag_bridge.h"
|
#include "rsp-server.h"
|
#include "rsp-server.h"
|
#include "chain_commands.h"
|
#include "chain_commands.h"
|
#include "cable_common.h"
|
#include "cable_common.h"
|
#include "or32_selftest.h"
|
#include "or32_selftest.h"
|
#include "bsdl.h"
|
#include "bsdl.h"
|
#include "errcodes.h"
|
#include "errcodes.h"
|
|
|
#define debug(...) //fprintf(stderr, __VA_ARGS__ )
|
#define debug(...) //fprintf(stderr, __VA_ARGS__ )
|
|
|
// How many command-line IR length settings to create by default
|
// How many command-line IR length settings to create by default
|
#define IR_START_SETS 16
|
#define IR_START_SETS 16
|
|
|
//////////////////////////////////////////////////
|
//////////////////////////////////////////////////
|
// Command line option flags / values
|
// Command line option flags / values
|
|
|
/* Which device in the scan chain we want to target.
|
/* Which device in the scan chain we want to target.
|
* 0 is the first device we find, which is nearest the data input of the cable.
|
* 0 is the first device we find, which is nearest the data input of the cable.
|
*/
|
*/
|
unsigned int target_dev_pos = 0;
|
unsigned int target_dev_pos = 0;
|
|
|
// Do test before setting up server?
|
// Do test before setting up server?
|
unsigned char do_selftest = 0;
|
unsigned char do_selftest = 0;
|
|
|
// IR register length in TAP of
|
// IR register length in TAP of
|
// Can override autoprobe, or set if IDCODE not supported
|
// Can override autoprobe, or set if IDCODE not supported
|
typedef struct {
|
typedef struct {
|
int dev_index;
|
int dev_index;
|
int ir_length;
|
int ir_length;
|
} irset;
|
} irset;
|
|
|
#define START_IR_SETS 16
|
#define START_IR_SETS 16
|
int reallocs = 0;
|
int reallocs = 0;
|
int num_ir_sets = 0;
|
int num_ir_sets = 0;
|
irset * cmd_line_ir_sizes = NULL;
|
irset * cmd_line_ir_sizes = NULL;
|
|
|
// DEBUG command for target device TAP
|
// DEBUG command for target device TAP
|
// May actually be USER1, for Xilinx devices using internal BSCAN modules
|
// May actually be USER1, for Xilinx devices using internal BSCAN modules
|
// Can override autoprobe, or set if unable to find in BSDL files
|
// Can override autoprobe, or set if unable to find in BSDL files
|
int cmd_line_cmd_debug = -1; // 0 is a valid debug command, so use -1
|
int cmd_line_cmd_debug = -1; // 0 is a valid debug command, so use -1
|
|
|
// TCP port to set up the server for GDB on
|
// TCP port to set up the server for GDB on
|
char *port;
|
char *port;
|
char default_port[] = "9999";
|
char default_port[] = "9999";
|
|
|
// Force altera virtual jtag mode on(1) or off(-1)
|
// Force altera virtual jtag mode on(1) or off(-1)
|
int force_alt_vjtag = 0;
|
int force_alt_vjtag = 0;
|
|
|
|
|
// Pointer to the command line arg used as the cable name
|
// Pointer to the command line arg used as the cable name
|
char * cable_name = NULL;
|
char * cable_name = NULL;
|
|
|
////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////
|
// List of IDCODES of devices on the JTAG scan chain
|
// List of IDCODES of devices on the JTAG scan chain
|
// The array is dynamically allocated in chain_commands/jtag_enumerate_chain()
|
// The array is dynamically allocated in chain_commands/jtag_enumerate_chain()
|
|
|
uint32_t *idcodes = NULL;
|
uint32_t *idcodes = NULL;
|
int num_devices = 0;
|
int num_devices = 0;
|
|
|
|
|
const char *name_not_found = "(unknown)";
|
const char *name_not_found = "(unknown)";
|
|
|
///////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////
|
// JTAG constants
|
// JTAG constants
|
|
|
// Defines for Altera JTAG constants
|
// Defines for Altera JTAG constants
|
#define ALTERA_MANUFACTURER_ID 0x6E
|
#define ALTERA_MANUFACTURER_ID 0x6E
|
|
|
// Defines for Xilinx JTAG constants
|
// Defines for Xilinx JTAG constants
|
#define XILINX_MANUFACTURER_ID 0x49
|
#define XILINX_MANUFACTURER_ID 0x49
|
|
|
|
|
///////////////////////////////////////////////////
|
///////////////////////////////////////////////////
|
// Prototypes for local / helper functions
|
// Prototypes for local / helper functions
|
int get_IR_size(int devidx);
|
int get_IR_size(int devidx);
|
uint32_t get_debug_cmd(int devidx);
|
uint32_t get_debug_cmd(int devidx);
|
void configure_chain(void);
|
void configure_chain(void);
|
void print_usage(char *func);
|
void print_usage(char *func);
|
void parse_args(int argc, char **argv);
|
void parse_args(int argc, char **argv);
|
void get_ir_opts(char *optstr, int *idx, int *val);
|
void get_ir_opts(char *optstr, int *idx, int *val);
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////////////////////
|
/*----------------------------------------------------------------------------------*/
|
/*----------------------------------------------------------------------------------*/
|
// Functions
|
// Functions
|
/////////////////////////////////////////////////////////////////////////////////////
|
/////////////////////////////////////////////////////////////////////////////////////
|
|
|
// Resets JTAG, and sets up DEBUG scan chain
|
// Resets JTAG, and sets up DEBUG scan chain
|
void configure_chain(void)
|
void configure_chain(void)
|
{
|
{
|
int i;
|
int i;
|
unsigned int manuf_id;
|
unsigned int manuf_id;
|
uint32_t cmd;
|
uint32_t cmd;
|
const char *name;
|
const char *name;
|
int irlen;
|
int irlen;
|
int err = APP_ERR_NONE;
|
int err = APP_ERR_NONE;
|
|
|
err |= tap_reset();
|
err |= tap_reset();
|
err |= jtag_enumerate_chain(&idcodes, &num_devices);
|
err |= jtag_enumerate_chain(&idcodes, &num_devices);
|
|
|
if(err != APP_ERR_NONE) {
|
if(err != APP_ERR_NONE) {
|
printf("Error %s enumerating JTAG chain, aborting.\n", get_err_string(err));
|
printf("Error %s enumerating JTAG chain, aborting.\n", get_err_string(err));
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
printf("\nDevices on JTAG chain:\n");
|
printf("\nDevices on JTAG chain:\n");
|
printf("Index\tName\t\tID Code\t\tIR Length\n");
|
printf("Index\tName\t\tID Code\t\tIR Length\n");
|
printf("----------------------------------------------------------------\n");
|
printf("----------------------------------------------------------------\n");
|
for(i = 0; i < num_devices; i++)
|
for(i = 0; i < num_devices; i++)
|
{
|
{
|
if(idcodes[i] != IDCODE_INVALID) {
|
if(idcodes[i] != IDCODE_INVALID) {
|
name = bsdl_get_name(idcodes[i]);
|
name = bsdl_get_name(idcodes[i]);
|
irlen = bsdl_get_IR_size(idcodes[i]);
|
irlen = bsdl_get_IR_size(idcodes[i]);
|
if(name == NULL)
|
if(name == NULL)
|
name = name_not_found;
|
name = name_not_found;
|
} else {
|
} else {
|
name = name_not_found;
|
name = name_not_found;
|
irlen = -1;
|
irlen = -1;
|
}
|
}
|
printf("%d: \t%s \t0x%08lX \t%d\n", i, name, idcodes[i], irlen);
|
printf("%d: \t%s \t0x%08lX \t%d\n", i, name, idcodes[i], irlen);
|
}
|
}
|
printf("\n");
|
printf("\n");
|
|
|
if(target_dev_pos >= num_devices) {
|
if(target_dev_pos >= num_devices) {
|
printf("ERROR: Requested target device (%i) beyond highest device index (%i).\n", target_dev_pos, num_devices-1);
|
printf("ERROR: Requested target device (%i) beyond highest device index (%i).\n", target_dev_pos, num_devices-1);
|
exit(1);
|
exit(1);
|
} else {
|
} else {
|
printf("Target device %i, JTAG ID = 0x%08lx\n", target_dev_pos, idcodes[target_dev_pos]);
|
printf("Target device %i, JTAG ID = 0x%08lx\n", target_dev_pos, idcodes[target_dev_pos]);
|
}
|
}
|
|
|
manuf_id = (idcodes[target_dev_pos] >> 1) & 0x7FF;
|
manuf_id = (idcodes[target_dev_pos] >> 1) & 0x7FF;
|
|
|
// Use BSDL files to determine prefix bits, postfix bits, debug command, IR length
|
// Use BSDL files to determine prefix bits, postfix bits, debug command, IR length
|
config_set_IR_size(get_IR_size(target_dev_pos));
|
config_set_IR_size(get_IR_size(target_dev_pos));
|
|
|
// Set the IR prefix / postfix bits
|
// Set the IR prefix / postfix bits
|
int total = 0;
|
int total = 0;
|
for(i = 0; i < num_devices; i++) {
|
for(i = 0; i < num_devices; i++) {
|
if(i == target_dev_pos) {
|
if(i == target_dev_pos) {
|
config_set_IR_postfix_bits(total);
|
config_set_IR_postfix_bits(total);
|
//debug("Postfix bits: %d\n", total);
|
//debug("Postfix bits: %d\n", total);
|
total = 0;
|
total = 0;
|
continue;
|
continue;
|
}
|
}
|
|
|
total += get_IR_size(i);
|
total += get_IR_size(i);
|
debug("Adding %i to total for devidx %i\n", get_IR_size(i), i);
|
debug("Adding %i to total for devidx %i\n", get_IR_size(i), i);
|
}
|
}
|
config_set_IR_prefix_bits(total);
|
config_set_IR_prefix_bits(total);
|
debug("Prefix bits: %d\n", total);
|
debug("Prefix bits: %d\n", total);
|
|
|
|
|
// Note that there's a little translation here, since device index 0 is actually closest to the cable data input
|
// Note that there's a little translation here, since device index 0 is actually closest to the cable data input
|
config_set_DR_prefix_bits(num_devices - target_dev_pos - 1); // number of devices between cable data out and target device
|
config_set_DR_prefix_bits(num_devices - target_dev_pos - 1); // number of devices between cable data out and target device
|
config_set_DR_postfix_bits(target_dev_pos); // number of devices between target device and cable data in
|
config_set_DR_postfix_bits(target_dev_pos); // number of devices between target device and cable data in
|
|
|
// Set the DEBUG command for the IR of the target device.
|
// Set the DEBUG command for the IR of the target device.
|
// If this is a Xilinx device, use USER1 instead of DEBUG
|
// If this is a Xilinx device, use USER1 instead of DEBUG
|
// If we Altera Virtual JTAG mode, we don't care.
|
// If we Altera Virtual JTAG mode, we don't care.
|
if((force_alt_vjtag == -1) || ((force_alt_vjtag == 0) && (manuf_id != ALTERA_MANUFACTURER_ID))) {
|
if((force_alt_vjtag == -1) || ((force_alt_vjtag == 0) && (manuf_id != ALTERA_MANUFACTURER_ID))) {
|
cmd = get_debug_cmd(target_dev_pos);
|
cmd = get_debug_cmd(target_dev_pos);
|
if(cmd == TAP_CMD_INVALID) {
|
if(cmd == TAP_CMD_INVALID) {
|
printf("Unable to find DEBUG command, aborting.\n");
|
printf("Unable to find DEBUG command, aborting.\n");
|
exit(1);
|
exit(1);
|
}
|
}
|
config_set_debug_cmd(cmd); // This may have to be USER1 if this is a Xilinx device
|
config_set_debug_cmd(cmd); // This may have to be USER1 if this is a Xilinx device
|
}
|
}
|
|
|
// Enable the kludge for Xilinx BSCAN, if necessary.
|
// Enable the kludge for Xilinx BSCAN, if necessary.
|
// Safe, but slower, for non-BSCAN TAPs.
|
// Safe, but slower, for non-BSCAN TAPs.
|
if(manuf_id == XILINX_MANUFACTURER_ID) {
|
if(manuf_id == XILINX_MANUFACTURER_ID) {
|
config_set_xilinx_bscan(1);
|
config_set_xilinx_bscan(1);
|
}
|
}
|
|
|
// Set Altera Virtual JTAG mode on or off. If not forced, then enable
|
// Set Altera Virtual JTAG mode on or off. If not forced, then enable
|
// if the target device has an Altera manufacturer IDCODE
|
// if the target device has an Altera manufacturer IDCODE
|
if(force_alt_vjtag == 1) {
|
if(force_alt_vjtag == 1) {
|
config_set_alt_vjtag(1);
|
config_set_alt_vjtag(1);
|
} else if(force_alt_vjtag == -1) {
|
} else if(force_alt_vjtag == -1) {
|
config_set_alt_vjtag(0);
|
config_set_alt_vjtag(0);
|
} else {
|
} else {
|
if(manuf_id == ALTERA_MANUFACTURER_ID) {
|
if(manuf_id == ALTERA_MANUFACTURER_ID) {
|
config_set_alt_vjtag(1);
|
config_set_alt_vjtag(1);
|
} else {
|
} else {
|
config_set_alt_vjtag(0);
|
config_set_alt_vjtag(0);
|
}
|
}
|
}
|
}
|
|
|
// Do a sanity test
|
// Do a sanity test
|
cmd = bsdl_get_idcode_cmd(idcodes[target_dev_pos]);
|
cmd = bsdl_get_idcode_cmd(idcodes[target_dev_pos]);
|
if(cmd != TAP_CMD_INVALID) {
|
if(cmd != TAP_CMD_INVALID) {
|
uint32_t id_read;
|
uint32_t id_read;
|
err |= jtag_get_idcode(cmd, &id_read);
|
err |= jtag_get_idcode(cmd, &id_read);
|
|
|
if(err != APP_ERR_NONE) {
|
if(err != APP_ERR_NONE) {
|
printf("Error %s checking IDCODE, aborting.\n", get_err_string(err));
|
printf("Error %s checking IDCODE, aborting.\n", get_err_string(err));
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
if(id_read == idcodes[target_dev_pos]) {
|
if(id_read == idcodes[target_dev_pos]) {
|
printf("IDCODE sanity test passed, chain OK!\n");
|
printf("IDCODE sanity test passed, chain OK!\n");
|
} else {
|
} else {
|
printf("Warning: IDCODE sanity test failed. Read IDCODE 0x%08lX, expected 0x%08lX\n", id_read, idcodes[target_dev_pos]);
|
printf("Warning: IDCODE sanity test failed. Read IDCODE 0x%08lX, expected 0x%08lX\n", id_read, idcodes[target_dev_pos]);
|
}
|
}
|
}
|
}
|
|
|
if(err |= tap_enable_debug_module()) { // Select the debug unit in the TAP.
|
if(err |= tap_enable_debug_module()) { // Select the debug unit in the TAP.
|
printf("Error %s enabling debug module, aborting.\n", get_err_string(err));
|
printf("Error %s enabling debug module, aborting.\n", get_err_string(err));
|
exit(1);
|
exit(1);
|
}
|
}
|
}
|
}
|
|
|
|
|
void print_usage(char *func)
|
void print_usage(char *func)
|
{
|
{
|
printf("JTAG connection between GDB and the Advanced Debug Interface.\n");
|
printf("JTAG connection between GDB and the Advanced Debug Interface.\n");
|
printf("Copyright (C) 2008 Nathan Yawn, nathan.yawn@opencores.org\n\n");
|
printf("Copyright (C) 2008 Nathan Yawn, nathan.yawn@opencores.org\n\n");
|
printf("Usage: %s (options) [cable] (cable options)\n", func);
|
printf("Usage: %s (options) [cable] (cable options)\n", func);
|
printf("Options:\n");
|
printf("Options:\n");
|
printf("\t-g [port] : port number for GDB (default: 9999)\n");
|
printf("\t-g [port] : port number for GDB (default: 9999)\n");
|
printf("\t-x [index] : Position of the target device in the scan chain\n");
|
printf("\t-x [index] : Position of the target device in the scan chain\n");
|
printf("\t-a [0 / 1] : force Altera virtual JTAG mode off (0) or on (1)\n");
|
printf("\t-a [0 / 1] : force Altera virtual JTAG mode off (0) or on (1)\n");
|
printf("\t-l [<index>:<bits>] : Specify length of IR register for device\n");
|
printf("\t-l [<index>:<bits>] : Specify length of IR register for device\n");
|
printf("\t <index>, override autodetect (if any)\n");
|
printf("\t <index>, override autodetect (if any)\n");
|
printf("\t-c [hex cmd] : Debug command for target TAP, override autodetect\n");
|
printf("\t-c [hex cmd] : Debug command for target TAP, override autodetect\n");
|
printf("\t (ignored for Altera targets)\n");
|
printf("\t (ignored for Altera targets)\n");
|
printf("\t-v [hex cmd] : VIR command for target TAP, override autodetect\n");
|
printf("\t-v [hex cmd] : VIR command for target TAP, override autodetect\n");
|
printf("\t (Altera virtual JTAG targets only)\n");
|
printf("\t (Altera virtual JTAG targets only)\n");
|
printf("\t-r [hex cmd] : VDR for target TAP, override autodetect\n");
|
printf("\t-r [hex cmd] : VDR for target TAP, override autodetect\n");
|
printf("\t (Altera virtual JTAG targets only)\n");
|
printf("\t (Altera virtual JTAG targets only)\n");
|
printf("\t-b [dirname] : Add a directory to search for BSDL files\n");
|
printf("\t-b [dirname] : Add a directory to search for BSDL files\n");
|
printf("\t-t : perform CPU / memory self-test before starting server\n");
|
printf("\t-t : perform CPU / memory self-test before starting server\n");
|
printf("\t-h : show help\n\n");
|
printf("\t-h : show help\n\n");
|
cable_print_help();
|
cable_print_help();
|
}
|
}
|
|
|
|
|
void parse_args(int argc, char **argv)
|
void parse_args(int argc, char **argv)
|
{
|
{
|
int c;
|
int c;
|
int i;
|
int i;
|
int idx, val;
|
int idx, val;
|
const char *valid_cable_args = NULL;
|
const char *valid_cable_args = NULL;
|
port = NULL;
|
port = NULL;
|
force_alt_vjtag = 0;
|
force_alt_vjtag = 0;
|
cmd_line_cmd_debug = -1;
|
cmd_line_cmd_debug = -1;
|
|
|
/* Parse the global arguments (if-any) */
|
/* Parse the global arguments (if-any) */
|
while((c = getopt(argc, argv, "+g:x:a:l:c:v:r:b:th")) != -1) {
|
while((c = getopt(argc, argv, "+g:x:a:l:c:v:r:b:th")) != -1) {
|
switch(c) {
|
switch(c) {
|
case 'h':
|
case 'h':
|
print_usage(argv[0]);
|
print_usage(argv[0]);
|
exit(0);
|
exit(0);
|
break;
|
break;
|
case 'g':
|
case 'g':
|
port = optarg;
|
port = optarg;
|
break;
|
break;
|
case 'x':
|
case 'x':
|
target_dev_pos = atoi(optarg);
|
target_dev_pos = atoi(optarg);
|
break;
|
break;
|
case 'l':
|
case 'l':
|
get_ir_opts(optarg, &idx, &val); // parse the option
|
get_ir_opts(optarg, &idx, &val); // parse the option
|
if(num_ir_sets >= (IR_START_SETS<<reallocs)) {
|
if(num_ir_sets >= (IR_START_SETS<<reallocs)) {
|
cmd_line_ir_sizes = (irset *) realloc(cmd_line_ir_sizes, (IR_START_SETS<<reallocs)*sizeof(irset));
|
cmd_line_ir_sizes = (irset *) realloc(cmd_line_ir_sizes, (IR_START_SETS<<reallocs)*sizeof(irset));
|
if(cmd_line_ir_sizes == NULL) {
|
if(cmd_line_ir_sizes == NULL) {
|
printf("Error: out of memory while parsing command line. Aborting.\n");
|
printf("Error: out of memory while parsing command line. Aborting.\n");
|
exit(1);
|
exit(1);
|
}
|
}
|
}
|
}
|
cmd_line_ir_sizes[num_ir_sets].dev_index = idx;
|
cmd_line_ir_sizes[num_ir_sets].dev_index = idx;
|
cmd_line_ir_sizes[num_ir_sets].ir_length = val;
|
cmd_line_ir_sizes[num_ir_sets].ir_length = val;
|
num_ir_sets++;
|
num_ir_sets++;
|
break;
|
break;
|
case 'c':
|
case 'c':
|
cmd_line_cmd_debug = strtoul(optarg, NULL, 16);
|
cmd_line_cmd_debug = strtoul(optarg, NULL, 16);
|
break;
|
break;
|
case 'v':
|
case 'v':
|
config_set_vjtag_cmd_vir(strtoul(optarg, NULL, 16));
|
config_set_vjtag_cmd_vir(strtoul(optarg, NULL, 16));
|
break;
|
break;
|
case 'r':
|
case 'r':
|
config_set_vjtag_cmd_vdr(strtoul(optarg, NULL, 16));
|
config_set_vjtag_cmd_vdr(strtoul(optarg, NULL, 16));
|
break;
|
break;
|
case 't':
|
case 't':
|
do_selftest = 1;
|
do_selftest = 1;
|
break;
|
break;
|
case 'a':
|
case 'a':
|
if(atoi(optarg) == 1)
|
if(atoi(optarg) == 1)
|
force_alt_vjtag = 1;
|
force_alt_vjtag = 1;
|
else
|
else
|
force_alt_vjtag = -1;
|
force_alt_vjtag = -1;
|
break;
|
break;
|
case 'b':
|
case 'b':
|
bsdl_add_directory(optarg);
|
bsdl_add_directory(optarg);
|
break;
|
break;
|
default:
|
default:
|
print_usage(argv[0]);
|
print_usage(argv[0]);
|
exit(1);
|
exit(1);
|
}
|
}
|
}
|
}
|
|
|
if(port == NULL)
|
if(port == NULL)
|
port = default_port;
|
port = default_port;
|
|
|
int found_cable = 0;
|
int found_cable = 0;
|
char* start_str = argv[optind];
|
char* start_str = argv[optind];
|
int start_idx = optind;
|
int start_idx = optind;
|
for(i = optind; i < argc; i++) {
|
for(i = optind; i < argc; i++) {
|
if(cable_select(argv[i]) == APP_ERR_NONE) {
|
if(cable_select(argv[i]) == APP_ERR_NONE) {
|
found_cable = 1;
|
found_cable = 1;
|
cable_name = argv[i];
|
cable_name = argv[i];
|
argv[optind] = argv[start_idx]; // swap the cable name with the other arg,
|
argv[optind] = argv[start_idx]; // swap the cable name with the other arg,
|
argv[start_idx] = start_str; // keep all cable opts at the end
|
argv[start_idx] = start_str; // keep all cable opts at the end
|
break;
|
break;
|
}
|
}
|
}
|
}
|
|
|
|
|
if(!found_cable) {
|
if(!found_cable) {
|
fprintf(stderr, "No valid cable specified.\n");
|
fprintf(stderr, "No valid cable specified.\n");
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
optind = start_idx+1; // reset the parse index
|
optind = start_idx+1; // reset the parse index
|
|
|
/* Get the cable-arguments */
|
/* Get the cable-arguments */
|
valid_cable_args = cable_get_args();
|
valid_cable_args = cable_get_args();
|
|
|
/* Parse the remaining options for the cable.
|
/* Parse the remaining options for the cable.
|
* Note that this will include unrecognized option from before the cable name.
|
* Note that this will include unrecognized option from before the cable name.
|
*/
|
*/
|
while((c = getopt(argc, argv, valid_cable_args)) != -1) {
|
while((c = getopt(argc, argv, valid_cable_args)) != -1) {
|
//printf("Got cable opt %c (0x%X)\n", (char)c, c);
|
//printf("Got cable opt %c (0x%X)\n", (char)c, c);
|
if(c == '?') {
|
if(c == '?') {
|
printf("\nERROR: Unknown cable option \'-%c\'\n\n", optopt);
|
printf("\nERROR: Unknown cable option \'-%c\'\n\n", optopt);
|
print_usage(argv[0]);
|
print_usage(argv[0]);
|
exit(1);
|
exit(1);
|
}
|
}
|
else if(cable_parse_opt(c, optarg) != APP_ERR_NONE) {
|
else if(cable_parse_opt(c, optarg) != APP_ERR_NONE) {
|
printf("\nERROR: Failed to parse cable option \'-%c\' %s\n\n", (char)c, optarg);
|
printf("\nERROR: Failed to parse cable option \'-%c\' %s\n\n", (char)c, optarg);
|
print_usage(argv[0]);
|
print_usage(argv[0]);
|
exit(1);
|
exit(1);
|
}
|
}
|
}
|
}
|
}
|
}
|
|
|
|
|
|
|
int main(int argc, char *argv[]) {
|
int main(int argc, char *argv[]) {
|
char *s;
|
char *s;
|
long int serverPort;
|
long int serverPort;
|
|
|
srand(getpid());
|
srand(getpid());
|
bsdl_init();
|
bsdl_init();
|
cmd_line_ir_sizes = (irset *) malloc(IR_START_SETS * sizeof(irset));
|
cmd_line_ir_sizes = (irset *) malloc(IR_START_SETS * sizeof(irset));
|
if(cmd_line_ir_sizes == NULL) {
|
if(cmd_line_ir_sizes == NULL) {
|
printf("ERROR: out of memory allocating array for IR sizes.\n");
|
printf("ERROR: out of memory allocating array for IR sizes.\n");
|
return 1;
|
return 1;
|
}
|
}
|
|
|
parse_args(argc, argv);
|
parse_args(argc, argv);
|
|
|
if(cable_init() != APP_ERR_NONE) {
|
if(cable_init() != APP_ERR_NONE) {
|
printf("Failed to initialize cable \'%s\', aborting.\n", cable_name);
|
printf("Failed to initialize cable \'%s\', aborting.\n", cable_name);
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
|
|
/* Initialize a new connection to the or1k board, and make sure we are
|
/* Initialize a new connection to the or1k board, and make sure we are
|
really connected. */
|
really connected. */
|
configure_chain();
|
configure_chain();
|
|
|
if(do_selftest) {
|
if(do_selftest) {
|
// Test the connection.
|
// Test the connection.
|
printf("*** Doing self-test ***\n");
|
printf("*** Doing self-test ***\n");
|
if(dbg_test() != APP_ERR_NONE) {
|
if(dbg_test() != APP_ERR_NONE) {
|
printf("Self-test FAILED *** Bailing out!\n");
|
printf("Self-test FAILED *** Bailing out!\n");
|
exit(1);
|
exit(1);
|
}
|
}
|
printf("*** Self-test PASSED ***\n");
|
printf("*** Self-test PASSED ***\n");
|
}
|
}
|
|
|
/* We have a connection. Establish server. */
|
/* We have a connection. Establish server. */
|
serverPort = strtol(port,&s,10);
|
serverPort = strtol(port,&s,10);
|
if(*s) return -1;
|
if(*s) return -1;
|
|
|
rsp_init(serverPort);
|
rsp_init(serverPort);
|
|
|
printf("JTAG bridge ready!\n");
|
printf("JTAG bridge ready!\n");
|
|
|
// This handles requests from GDB. I'd prefer the while() loop to be in the function
|
// This handles requests from GDB. I'd prefer the while() loop to be in the function
|
// with the select()/poll(), but the or1ksim rsp code (ported for use here) doesn't work
|
// with the select()/poll(), but the or1ksim rsp code (ported for use here) doesn't work
|
// that way, and I don't want to rework that code (to make it easier to import fixes
|
// that way, and I don't want to rework that code (to make it easier to import fixes
|
// written for the or1ksim rsp server). --NAY
|
// written for the or1ksim rsp server). --NAY
|
while(handle_rsp());
|
while(handle_rsp());
|
|
|
return 0;
|
return 0;
|
}
|
}
|
|
|
//////////////////////////////////////////////////
|
//////////////////////////////////////////////////
|
// Helper functions
|
// Helper functions
|
|
|
int get_IR_size(int devidx)
|
int get_IR_size(int devidx)
|
{
|
{
|
int retval = -1;
|
int retval = -1;
|
int i;
|
int i;
|
|
|
if(idcodes[devidx] != IDCODE_INVALID) {
|
if(idcodes[devidx] != IDCODE_INVALID) {
|
retval = bsdl_get_IR_size(idcodes[devidx]);
|
retval = bsdl_get_IR_size(idcodes[devidx]);
|
}
|
}
|
|
|
// Search for this devices in the array of command line IR sizes
|
// Search for this devices in the array of command line IR sizes
|
for(i = 0; i < num_ir_sets; i++) {
|
for(i = 0; i < num_ir_sets; i++) {
|
if(cmd_line_ir_sizes[i].dev_index == devidx) {
|
if(cmd_line_ir_sizes[i].dev_index == devidx) {
|
if((retval > 0) && (retval != cmd_line_ir_sizes[i].ir_length))
|
if((retval > 0) && (retval != cmd_line_ir_sizes[i].ir_length))
|
printf("Warning: overriding autoprobed IR length (%i) with command line value (%i) for device %i\n", retval,
|
printf("Warning: overriding autoprobed IR length (%i) with command line value (%i) for device %i\n", retval,
|
cmd_line_ir_sizes[i].ir_length, devidx);
|
cmd_line_ir_sizes[i].ir_length, devidx);
|
retval = cmd_line_ir_sizes[i].ir_length;
|
retval = cmd_line_ir_sizes[i].ir_length;
|
}
|
}
|
}
|
}
|
|
|
if(retval < 0) { // Make sure we have a value
|
if(retval < 0) { // Make sure we have a value
|
printf("ERROR! Unable to autoprobe IR length for device index %i; Must set IR size on command line. Aborting.\n", devidx);
|
printf("ERROR! Unable to autoprobe IR length for device index %i; Must set IR size on command line. Aborting.\n", devidx);
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
return retval;
|
return retval;
|
}
|
}
|
|
|
|
|
uint32_t get_debug_cmd(int devidx)
|
uint32_t get_debug_cmd(int devidx)
|
{
|
{
|
int retval = TAP_CMD_INVALID;
|
int retval = TAP_CMD_INVALID;
|
uint32_t manuf_id = (idcodes[devidx] >> 1) & 0x7FF;
|
uint32_t manuf_id = (idcodes[devidx] >> 1) & 0x7FF;
|
|
|
if(idcodes[devidx] != IDCODE_INVALID) {
|
if(idcodes[devidx] != IDCODE_INVALID) {
|
if(manuf_id == XILINX_MANUFACTURER_ID) {
|
if(manuf_id == XILINX_MANUFACTURER_ID) {
|
retval = bsdl_get_user1_cmd(idcodes[devidx]);
|
retval = bsdl_get_user1_cmd(idcodes[devidx]);
|
if(cmd_line_cmd_debug < 0) printf("Xilinx IDCODE, assuming internal BSCAN mode\n\t(using USER1 instead of DEBUG TAP command)\n");
|
if(cmd_line_cmd_debug < 0) printf("Xilinx IDCODE, assuming internal BSCAN mode\n\t(using USER1 instead of DEBUG TAP command)\n");
|
} else {
|
} else {
|
retval = bsdl_get_debug_cmd(idcodes[devidx]);
|
retval = bsdl_get_debug_cmd(idcodes[devidx]);
|
}
|
}
|
}
|
}
|
|
|
if(cmd_line_cmd_debug >= 0) {
|
if(cmd_line_cmd_debug >= 0) {
|
if(retval != TAP_CMD_INVALID) {
|
if(retval != TAP_CMD_INVALID) {
|
printf("Warning: overriding autoprobe debug command (0x%X) with command line value (0x%X)\n", retval, cmd_line_cmd_debug);
|
printf("Warning: overriding autoprobe debug command (0x%X) with command line value (0x%X)\n", retval, cmd_line_cmd_debug);
|
} else {
|
} else {
|
printf("Using command-line debug command 0x%X\n", cmd_line_cmd_debug);
|
printf("Using command-line debug command 0x%X\n", cmd_line_cmd_debug);
|
}
|
}
|
retval = cmd_line_cmd_debug;
|
retval = cmd_line_cmd_debug;
|
}
|
}
|
|
|
if(retval == TAP_CMD_INVALID) {
|
if(retval == TAP_CMD_INVALID) {
|
printf("ERROR! Unable to find DEBUG command for device index %i, device ID 0x%0lX\n", devidx, idcodes[devidx]);
|
printf("ERROR! Unable to find DEBUG command for device index %i, device ID 0x%0lX\n", devidx, idcodes[devidx]);
|
}
|
}
|
|
|
return retval;
|
return retval;
|
}
|
}
|
|
|
|
|
// Extracts two values from an option string
|
// Extracts two values from an option string
|
// of the form "<index>:<value>", where both args
|
// of the form "<index>:<value>", where both args
|
// are in base 10
|
// are in base 10
|
void get_ir_opts(char *optstr, int *idx, int *val)
|
void get_ir_opts(char *optstr, int *idx, int *val)
|
{
|
{
|
char *ptr;
|
char *ptr;
|
|
|
ptr = strstr(optstr, ":");
|
ptr = strstr(optstr, ":");
|
if(ptr == NULL) {
|
if(ptr == NULL) {
|
printf("Error: badly formatted IR length option. Use format \'<index>:<value>\', without spaces, where both args are in base 10\n");
|
printf("Error: badly formatted IR length option. Use format \'<index>:<value>\', without spaces, where both args are in base 10\n");
|
exit(1);
|
exit(1);
|
}
|
}
|
|
|
*ptr = '\0';
|
*ptr = '\0';
|
ptr++; // This now points to the second (value) arg string
|
ptr++; // This now points to the second (value) arg string
|
|
|
*idx = strtoul(optstr, NULL, 10);
|
*idx = strtoul(optstr, NULL, 10);
|
*val = strtoul(ptr, NULL, 10);
|
*val = strtoul(ptr, NULL, 10);
|
// ***CHECK FOR SUCCESS
|
// ***CHECK FOR SUCCESS
|
}
|
}
|
|
|
|
|