OpenCores
URL https://opencores.org/ocsvn/ata/ata/trunk

Subversion Repositories ata

[/] [ata/] [trunk/] [bench/] [verilog/] [test_bench_top.v] - Diff between revs 21 and 33

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 21 Rev 33
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
////                                                             ////
////                                                             ////
////  Top Level Test Bench                                       ////
////  Top Level Test Bench                                       ////
////                                                             ////
////                                                             ////
////                                                             ////
////                                                             ////
////  Author: Rudolf Usselmann                                   ////
////  Author: Rudolf Usselmann                                   ////
////          rudi@asics.ws                                      ////
////          rudi@asics.ws                                      ////
////                                                             ////
////                                                             ////
////                                                             ////
////                                                             ////
////  Downloaded from: http://www.opencores.org/cores/vga_lcd/   ////
////  Downloaded from: http://www.opencores.org/cores/vga_lcd/   ////
////                                                             ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
////                                                             ////
////                                                             ////
//// Copyright (C) 2001 Rudolf Usselmann                         ////
//// Copyright (C) 2001 Rudolf Usselmann                         ////
////                    rudi@asics.ws                            ////
////                    rudi@asics.ws                            ////
////                                                             ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
 
 
//  CVS Log
//  CVS Log
//
//
//  $Id: test_bench_top.v,v 1.2 2002-02-16 10:41:16 rherveille Exp $
//  $Id: test_bench_top.v,v 1.2 2002-02-16 10:41:16 rherveille Exp $
//
//
//  $Date: 2002-02-16 10:41:16 $
//  $Date: 2002-02-16 10:41:16 $
//  $Revision: 1.2 $
//  $Revision: 1.2 $
//  $Author: rherveille $
//  $Author: rherveille $
//  $Locker:  $
//  $Locker:  $
//  $State: Exp $
//  $State: Exp $
//
//
// Change History:
// Change History:
//               $Log: not supported by cvs2svn $
//               $Log: not supported by cvs2svn $
//               Revision 1.1  2001/08/16 10:01:05  rudi
//               Revision 1.1  2001/08/16 10:01:05  rudi
//
//
//               - Added Test Bench
//               - Added Test Bench
//               - Added Synthesis scripts for Design Compiler
//               - Added Synthesis scripts for Design Compiler
//               - Fixed minor bug in atahost_top
//               - Fixed minor bug in atahost_top
//
//
//
//
//
//
//
//
//                        
//                        
 
 
`timescale 1ns / 10ps
`timescale 1ns / 10ps
 
 
module test;
module test;
 
 
reg             clk;
reg             clk;
reg             rst;
reg             rst;
 
 
wire            int;
wire            int;
wire    [31:0]   wb_addr_i;
wire    [31:0]   wb_addr_i;
wire    [31:0]   wb_data_i;
wire    [31:0]   wb_data_i;
wire    [31:0]   wb_data_o;
wire    [31:0]   wb_data_o;
wire    [3:0]    wb_sel_i;
wire    [3:0]    wb_sel_i;
wire            wb_we_i;
wire            wb_we_i;
wire            wb_stb_i;
wire            wb_stb_i;
wire            wb_cyc_i;
wire            wb_cyc_i;
wire            wb_ack_o;
wire            wb_ack_o;
wire            wb_err_o;
wire            wb_err_o;
 
 
wire            ata_rst_;
wire            ata_rst_;
wire    [15:0]   ata_dout;
wire    [15:0]   ata_dout;
wire    [15:0]   ata_din;
wire    [15:0]   ata_din;
wire    [15:0]   ata_data;
wire    [15:0]   ata_data;
wire            ata_doe;
wire            ata_doe;
wire    [2:0]    ata_da;
wire    [2:0]    ata_da;
wire            ata_cs0, ata_cs1;
wire            ata_cs0, ata_cs1;
wire            ata_dior, ata_diow;
wire            ata_dior, ata_diow;
wire            ata_iordy;
wire            ata_iordy;
wire            ata_intrq;
wire            ata_intrq;
reg             ata_intrq_r;
reg             ata_intrq_r;
 
 
 
 
// Test Bench Variables
// Test Bench Variables
integer         wd_cnt;
integer         wd_cnt;
integer         error_cnt;
integer         error_cnt;
integer         verbose;
integer         verbose;
 
 
// Misc Variables
// Misc Variables
 
 
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
//
//
// Defines 
// Defines 
//
//
 
 
`define CTRL            32'h0000_0000
`define CTRL            32'h0000_0000
`define STAT            32'h0000_0004
`define STAT            32'h0000_0004
`define PCTR            32'h0000_0008
`define PCTR            32'h0000_0008
`define ATA_DEV         32'h0000_0040
`define ATA_DEV         32'h0000_0040
 
 
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
//
//
// Simulation Initialization and Start up Section
// Simulation Initialization and Start up Section
//
//
 
 
initial
initial
   begin
   begin
        $display("\n\n");
        $display("\n\n");
        $display("******************************************************");
        $display("******************************************************");
        $display("* WISHBONE ATA 1 Controller Simulation started ...   *");
        $display("* WISHBONE ATA 1 Controller Simulation started ...   *");
        $display("******************************************************");
        $display("******************************************************");
        $display("\n");
        $display("\n");
`ifdef WAVES
`ifdef WAVES
        $shm_open("waves");
        $shm_open("waves");
        $shm_probe("AS",test,"AS");
        $shm_probe("AS",test,"AS");
        $display("INFO: Signal dump enabled ...\n\n");
        $display("INFO: Signal dump enabled ...\n\n");
`endif
`endif
        wd_cnt = 0;
        wd_cnt = 0;
        error_cnt = 0;
        error_cnt = 0;
        clk = 0;
        clk = 0;
        rst = 0;
        rst = 0;
        verbose = 1;
        verbose = 1;
        ata_intrq_r=0;
        ata_intrq_r=0;
 
 
        repeat(10)      @(posedge clk);
        repeat(10)      @(posedge clk);
        rst = 1;
        rst = 1;
        repeat(10)      @(posedge clk);
        repeat(10)      @(posedge clk);
 
 
        // HERE IS WHERE THE TEST CASES GO ...
        // HERE IS WHERE THE TEST CASES GO ...
 
 
if(1)   // Full Regression Run
if(1)   // Full Regression Run
   begin
   begin
        io_test1;
        io_test1;
        io_test2;
        io_test2;
        int_test;
        int_test;
        rst_test;
        rst_test;
 
 
   end
   end
else
else
   begin
   begin
 
 
        //
        //
        // TEST DEVELOPMENT AREA
        // TEST DEVELOPMENT AREA
        //
        //
$display("\n\n");
$display("\n\n");
$display("*****************************************************");
$display("*****************************************************");
$display("*** DEVELOPMENT Test                              ***");
$display("*** DEVELOPMENT Test                              ***");
$display("*****************************************************\n");
$display("*****************************************************\n");
 
 
 
 
 
 
 
 
show_errors;
show_errors;
$display("*****************************************************");
$display("*****************************************************");
$display("*** Test DONE ...                                 ***");
$display("*** Test DONE ...                                 ***");
$display("*****************************************************\n\n");
$display("*****************************************************\n\n");
 
 
   end
   end
        repeat(100)     @(posedge clk);
        repeat(100)     @(posedge clk);
        $finish;
        $finish;
   end
   end
 
 
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
//
//
// System Clock (100Mhz)
// System Clock (100Mhz)
//
//
 
 
always #5       clk = ~clk;
always #5       clk = ~clk;
 
 
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
//
//
// Watchdog Counter
// Watchdog Counter
// Terminate simulation if nothing happens ...
// Terminate simulation if nothing happens ...
//
//
 
 
always @(wb_cyc_i or wb_ack_o)
always @(wb_cyc_i or wb_ack_o)
        wd_cnt <= #5 0;
        wd_cnt <= #5 0;
 
 
always @(posedge clk)
always @(posedge clk)
        wd_cnt <= #1 wd_cnt + 1;
        wd_cnt <= #1 wd_cnt + 1;
 
 
always @(wd_cnt)
always @(wd_cnt)
        if(wd_cnt>5000)
        if(wd_cnt>5000)
           begin
           begin
                $display("\n\n*************************************\n");
                $display("\n\n*************************************\n");
                $display("ERROR: Watch Dog Counter Expired\n");
                $display("ERROR: Watch Dog Counter Expired\n");
                $display("*************************************\n\n\n");
                $display("*************************************\n\n\n");
                $finish;
                $finish;
           end
           end
 
 
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
//
//
// DUT & Models
// DUT & Models
//
//
 
 
// Create an external Tri-State Bus to the ATA Device
// Create an external Tri-State Bus to the ATA Device
assign ata_din  = ata_data;
assign ata_din  = ata_data;
assign ata_data = ata_doe ? ata_dout : 16'hzzzz;
assign ata_data = ata_doe ? ata_dout : 16'hzzzz;
 
 
// DUT: ATA Host
// DUT: ATA Host
atahost_top u0( //-- WISHBONE SYSCON signals
atahost_top u0( //-- WISHBONE SYSCON signals
                .wb_clk_i(              clk             ),
                .wb_clk_i(              clk             ),
                .arst_i(                rst             ),
                .arst_i(                rst             ),
                .wb_rst_i(              ~rst            ),
                .wb_rst_i(              ~rst            ),
 
 
                //-- WISHBONE SLAVE signals
                //-- WISHBONE SLAVE signals
                .wb_cyc_i(              wb_cyc_i        ),
                .wb_cyc_i(              wb_cyc_i        ),
                .wb_stb_i(              wb_stb_i        ),
                .wb_stb_i(              wb_stb_i        ),
                .wb_ack_o(              wb_ack_o        ),
                .wb_ack_o(              wb_ack_o        ),
                .wb_err_o(              wb_err_o        ),
                .wb_err_o(              wb_err_o        ),
                .wb_adr_i(              wb_addr_i[6:2]  ),
                .wb_adr_i(              wb_addr_i[6:2]  ),
                .wb_dat_i(              wb_data_i       ),
                .wb_dat_i(              wb_data_i       ),
                .wb_dat_o(              wb_data_o       ),
                .wb_dat_o(              wb_data_o       ),
                .wb_sel_i(              wb_sel_i        ),
                .wb_sel_i(              wb_sel_i        ),
                .wb_we_i(               wb_we_i         ),
                .wb_we_i(               wb_we_i         ),
                .wb_inta_o(             int             ),
                .wb_inta_o(             int             ),
 
 
                //-- ATA signals
                //-- ATA signals
                .resetn_pad_o(  ata_rst_        ),
                .resetn_pad_o(  ata_rst_        ),
                .dd_pad_i(              ata_din         ),
                .dd_pad_i(              ata_din         ),
                .dd_pad_o(              ata_dout        ),
                .dd_pad_o(              ata_dout        ),
                .dd_padoe_o(            ata_doe         ),
                .dd_padoe_o(            ata_doe         ),
                .da_pad_o(              ata_da          ),
                .da_pad_o(              ata_da          ),
                .cs0n_pad_o(    ata_cs0         ),
                .cs0n_pad_o(    ata_cs0         ),
                .cs1n_pad_o(    ata_cs1         ),
                .cs1n_pad_o(    ata_cs1         ),
                .diorn_pad_o(   ata_dior_       ),
                .diorn_pad_o(   ata_dior_       ),
                .diown_pad_o(   ata_diow_       ),
                .diown_pad_o(   ata_diow_       ),
                .iordy_pad_i(   ata_iordy       ),
                .iordy_pad_i(   ata_iordy       ),
                .intrq_pad_i(   ata_intrq_r     )
                .intrq_pad_i(   ata_intrq_r     )
                );
                );
 
 
// ATA Device Model
// ATA Device Model
ata_device a0(  .ata_rst_(      ata_rst_        ),
ata_device a0(  .ata_rst_(      ata_rst_        ),
                .ata_data(      ata_data        ),
                .ata_data(      ata_data        ),
                .ata_da(        ata_da          ),
                .ata_da(        ata_da          ),
                .ata_cs0(       ata_cs0         ),
                .ata_cs0(       ata_cs0         ),
                .ata_cs1(       ata_cs1         ),
                .ata_cs1(       ata_cs1         ),
                .ata_dior_(     ata_dior_       ),
                .ata_dior_(     ata_dior_       ),
                .ata_diow_(     ata_diow_       ),
                .ata_diow_(     ata_diow_       ),
                .ata_iordy(     ata_iordy       ),
                .ata_iordy(     ata_iordy       ),
                .ata_intrq(     ata_intrq       ) );
                .ata_intrq(     ata_intrq       ) );
 
 
// WISHBONE Master Model
// WISHBONE Master Model
wb_mast m0(     .clk(           clk             ),
wb_mast m0(     .clk(           clk             ),
                .rst(           rst             ),
                .rst(           rst             ),
                .adr(           wb_addr_i       ),
                .adr(           wb_addr_i       ),
                .din(           wb_data_o       ),
                .din(           wb_data_o       ),
                .dout(          wb_data_i       ),
                .dout(          wb_data_i       ),
                .cyc(           wb_cyc_i        ),
                .cyc(           wb_cyc_i        ),
                .stb(           wb_stb_i        ),
                .stb(           wb_stb_i        ),
                .sel(           wb_sel_i        ),
                .sel(           wb_sel_i        ),
                .we(            wb_we_i         ),
                .we(            wb_we_i         ),
                .ack(           wb_ack_o        ),
                .ack(           wb_ack_o        ),
                .err(           wb_err_o        ),
                .err(           wb_err_o        ),
                .rty(           1'b0            ) );
                .rty(           1'b0            ) );
 
 
// External Tests
// External Tests
`include "tests.v"
`include "tests.v"
 
 
endmodule
endmodule
 
 
 
 
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.