OpenCores
URL https://opencores.org/ocsvn/ft816float/ft816float/trunk

Subversion Repositories ft816float

[/] [ft816float/] [trunk/] [rtl/] [verilog2/] [fpFMA.v] - Diff between revs 29 and 32

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 29 Rev 32
// ============================================================================
// ============================================================================
//        __
//        __
//   \\__/ o\    (C) 2019  Robert Finch, Waterloo
//   \\__/ o\    (C) 2019  Robert Finch, Waterloo
//    \  __ /    All rights reserved.
//    \  __ /    All rights reserved.
//     \/_//     robfinch<remove>@finitron.ca
//     \/_//     robfinch<remove>@finitron.ca
//       ||
//       ||
//
//
//      fpFMA.v
//      fpFMA.v
//              - floating point fused multiplier + adder
//              - floating point fused multiplier + adder
//              - can issue every clock cycle
//              - can issue every clock cycle
//              - parameterized FPWIDth
//              - parameterized FPWIDth
//              - IEEE 754 representation
//              - IEEE 754 representation
//
//
//
//
// This source file is free software: you can redistribute it and/or modify 
// This source file is free software: you can redistribute it and/or modify 
// it under the terms of the GNU Lesser General Public License as published 
// it under the terms of the GNU Lesser General Public License as published 
// by the Free Software Foundation, either version 3 of the License, or     
// by the Free Software Foundation, either version 3 of the License, or     
// (at your option) any later version.                                      
// (at your option) any later version.                                      
//                                                                          
//                                                                          
// This source file is distributed in the hope that it will be useful,      
// This source file is distributed in the hope that it will be useful,      
// but WITHOUT ANY WARRANTY; without even the implied warranty of           
// but WITHOUT ANY WARRANTY; without even the implied warranty of           
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            
// GNU General Public License for more details.                             
// GNU General Public License for more details.                             
//                                                                          
//                                                                          
// You should have received a copy of the GNU General Public License        
// You should have received a copy of the GNU General Public License        
// along with this program.  If not, see <http://www.gnu.org/licenses/>.    
// along with this program.  If not, see <http://www.gnu.org/licenses/>.    
//                                                                          
//                                                                          
// ============================================================================
// ============================================================================
 
 
`include "fpConfig.sv"
`include "fpConfig.sv"
 
 
module fpFMA (clk, ce, op, rm, a, b, c, o, under, over, inf, zero);
module fpFMA (clk, ce, op, rm, a, b, c, o, under, over, inf, zero);
parameter FPWID = 32;
parameter FPWID = 128;
 
parameter MUL_LATENCY = FPWID==128 ? 16 :
 
                                                                                                FPWID==80 ? 16 :
 
                                                                                                FPWID==64 ? 16 :
 
                                                                                                FPWID==32 ?  5 :
 
                                                                                                1;
`include "fpSize.sv"
`include "fpSize.sv"
 
 
input clk;
input clk;
input ce;
input ce;
input op;               // operation 0 = add, 1 = subtract
input op;               // operation 0 = add, 1 = subtract
input [2:0] rm;
input [2:0] rm;
input  [MSB:0] a, b, c;
input  [MSB:0] a, b, c;
output [EX:0] o;
output [EX:0] o;
output under;
output under;
output over;
output over;
output inf;
output inf;
output zero;
output zero;
 
 
// constants
// constants
wire [EMSB:0] infXp = {EMSB+1{1'b1}};    // infinite / NaN - all ones
wire [EMSB:0] infXp = {EMSB+1{1'b1}};    // infinite / NaN - all ones
// The following is the value for an exponent of zero, with the offset
// The following is the value for an exponent of zero, with the offset
// eg. 8'h7f for eight bit exponent, 11'h7ff for eleven bit exponent, etc.
// eg. 8'h7f for eight bit exponent, 11'h7ff for eleven bit exponent, etc.
wire [EMSB:0] bias = {1'b0,{EMSB{1'b1}}};        //2^0 exponent
wire [EMSB:0] bias = {1'b0,{EMSB{1'b1}}};        //2^0 exponent
// The following is a template for a quiet nan. (MSB=1)
// The following is a template for a quiet nan. (MSB=1)
wire [FMSB:0] qNaN  = {1'b1,{FMSB{1'b0}}};
wire [FMSB:0] qNaN  = {1'b1,{FMSB{1'b0}}};
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #1
// Clock #1
// - decode the input operands
// - decode the input operands
// - derive basic information
// - derive basic information
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
wire sa1, sb1, sc1;                     // sign bit
wire sa1, sb1, sc1;                     // sign bit
wire [EMSB:0] xa1, xb1, xc1;     // exponent bits
wire [EMSB:0] xa1, xb1, xc1;     // exponent bits
wire [FMSB+1:0] fracta1, fractb1, fractc1;       // includes unhidden bit
wire [FMSB+1:0] fracta1, fractb1, fractc1;       // includes unhidden bit
wire a_dn1, b_dn1, c_dn1;                       // a/b is denormalized
wire a_dn1, b_dn1, c_dn1;                       // a/b is denormalized
wire aNan1, bNan1, cNan1;
wire aNan1, bNan1, cNan1;
wire az1, bz1, cz1;
wire az1, bz1, cz1;
wire aInf1, bInf1, cInf1;
wire aInf1, bInf1, cInf1;
reg op1;
reg op1;
 
 
fpDecompReg #(FPWID) u1a (.clk(clk), .ce(ce), .i(a), .sgn(sa1), .exp(xa1), .fract(fracta1), .xz(a_dn1), .vz(az1), .inf(aInf1), .nan(aNan1) );
fpDecompReg #(FPWID) u1a (.clk(clk), .ce(ce), .i(a), .sgn(sa1), .exp(xa1), .fract(fracta1), .xz(a_dn1), .vz(az1), .inf(aInf1), .nan(aNan1) );
fpDecompReg #(FPWID) u1b (.clk(clk), .ce(ce), .i(b), .sgn(sb1), .exp(xb1), .fract(fractb1), .xz(b_dn1), .vz(bz1), .inf(bInf1), .nan(bNan1) );
fpDecompReg #(FPWID) u1b (.clk(clk), .ce(ce), .i(b), .sgn(sb1), .exp(xb1), .fract(fractb1), .xz(b_dn1), .vz(bz1), .inf(bInf1), .nan(bNan1) );
fpDecompReg #(FPWID) u1c (.clk(clk), .ce(ce), .i(c), .sgn(sc1), .exp(xc1), .fract(fractc1), .xz(c_dn1), .vz(cz1), .inf(cInf1), .nan(cNan1) );
fpDecompReg #(FPWID) u1c (.clk(clk), .ce(ce), .i(c), .sgn(sc1), .exp(xc1), .fract(fractc1), .xz(c_dn1), .vz(cz1), .inf(cInf1), .nan(cNan1) );
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) op1 <= op;
        if (ce) op1 <= op;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #2
// Clock #2
// Compute the sum of the exponents.
// Compute the sum of the exponents.
// correct the exponent for denormalized operands
// correct the exponent for denormalized operands
// adjust the sum by the exponent offset (subtract 127)
// adjust the sum by the exponent offset (subtract 127)
// mul: ex1 = xa + xb,  result should always be < 1ffh
// mul: ex1 = xa + xb,  result should always be < 1ffh
// Form partial products (clocks 2 to 5)
// Form partial products (clocks 2 to 5)
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg abz2;
reg abz2;
reg [EMSB+2:0] ex2;
reg [EMSB+2:0] ex2;
reg [EMSB:0] xc2;
reg [EMSB:0] xc2;
reg realOp2;
reg realOp2;
reg xcInf2;
reg xcInf2;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) abz2 <= az1|bz1;
        if (ce) abz2 <= az1|bz1;
always @(posedge clk)
always @(posedge clk)
        if (ce) ex2 <= (xa1|a_dn1) + (xb1|b_dn1) - bias;
        if (ce) ex2 <= (xa1|a_dn1) + (xb1|b_dn1) - bias;
always @(posedge clk)
always @(posedge clk)
        if (ce) xc2 <= (xc1|c_dn1);
        if (ce) xc2 <= (xc1|c_dn1);
always @(posedge clk)
always @(posedge clk)
        if (ce) xcInf2 = &xc1;
        if (ce) xcInf2 = &xc1;
 
 
// Figure out which operation is really needed an add or
// Figure out which operation is really needed an add or
// subtract ?
// subtract ?
// If the signs are the same, use the orignal op,
// If the signs are the same, use the orignal op,
// otherwise flip the operation
// otherwise flip the operation
//  a +  b = add,+
//  a +  b = add,+
//  a + -b = sub, so of larger
//  a + -b = sub, so of larger
// -a +  b = sub, so of larger
// -a +  b = sub, so of larger
// -a + -b = add,-
// -a + -b = add,-
//  a -  b = sub, so of larger
//  a -  b = sub, so of larger
//  a - -b = add,+
//  a - -b = add,+
// -a -  b = add,-
// -a -  b = add,-
// -a - -b = sub, so of larger
// -a - -b = sub, so of larger
always @(posedge clk)
always @(posedge clk)
        if (ce) realOp2 <= op1 ^ (sa1 ^ sb1) ^ sc1;
        if (ce) realOp2 <= op1 ^ (sa1 ^ sb1) ^ sc1;
 
 
 
 
reg [FX:0] fract5;
wire [FX:0] fract17;
generate
generate begin : gMults
if (FPWID+`EXTRA_BITS==84) begin
// 16 clocks for multiply
reg [33:0] p00,p01,p02,p03;
if (FPWID==128) begin
reg [33:0] p10,p11,p12,p13;
        mult114x114 umul1 (clk, ce, {1'b0,fracta1}, {1'b0,fractb1}, fract17[FX-1:0]);
reg [33:0] p20,p21,p22,p23;
        assign fract17[FX] = 1'b0;
reg [33:0] p30,p31,p32,p33;
end
reg [135:0] fract3a;
else if (FPWID==80) begin
reg [135:0] fract3b;
        mult64x64 umul2 (.CLK(clk), .CE(ce), .A(fracta1), .B(fractb1), .P(fract17[FX-1:0]));
reg [135:0] fract3c;
        assign fract17[FX] = 1'b0;
reg [135:0] fract3d;
end
reg [135:0] fract4a;
else if (FPWID==64) begin
reg [135:0] fract4b;
        mult53x53 umul3 (.CLK(clk), .CE(ce), .A(fracta1), .B(fractb1), .P(fract17[FX-1:0]));
 
        assign fract17[FX] = 1'b0;
        always @(posedge clk)
end
        if (ce) begin
else if (FPWID==32) begin
                p00 <= fracta1[16: 0] * fractb1[16: 0];
        mult24x24 umul4 (.CLK(clk), .CE(ce), .A(fracta1), .B(fractb1), .P(fract17[FX-1:0]));
                p01 <= fracta1[33:17] * fractb1[16: 0];
        assign fract17[FX] = 1'b0;
                p02 <= fracta1[50:34] * fractb1[16: 0];
 
                p03 <= fracta1[67:51] * fractb1[16: 0];
 
 
 
                p10 <= fracta1[16: 0] * fractb1[33:17];
 
                p11 <= fracta1[33:17] * fractb1[33:17];
 
                p12 <= fracta1[50:34] * fractb1[33:17];
 
                p13 <= fracta1[67:51] * fractb1[33:17];
 
 
 
                p20 <= fracta1[16: 0] * fractb1[50:34];
 
                p21 <= fracta1[33:17] * fractb1[50:34];
 
                p22 <= fracta1[50:34] * fractb1[50:34];
 
                p23 <= fracta1[67:51] * fractb1[50:34];
 
 
 
                p30 <= fracta1[15: 0] * fractb1[67:51];
 
                p31 <= fracta1[31:16] * fractb1[67:51];
 
                p32 <= fracta1[47:32] * fractb1[67:51];
 
                p33 <= fracta1[63:48] * fractb1[67:51];
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract3a <= {p33,p31,p20,p00};
 
                fract3b <= {p32,p12,p10,17'b0} + {p23,p03,p01,17'b0};
 
                fract3c <= {p22,p11,34'b0} + {p13,p02,34'b0};
 
                fract3d <= {p12,51'b0} + {p03,51'b0};
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract4a <= fract3a + fract3b;
 
                fract4b <= fract3c + fract3d;
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract5 <= fract4a + fract4b;
 
        end
 
end
 
else if (FPWID+`EXTRA_BITS==80) begin
 
reg [31:0] p00,p01,p02,p03;
 
reg [31:0] p10,p11,p12,p13;
 
reg [31:0] p20,p21,p22,p23;
 
reg [31:0] p30,p31,p32,p33;
 
reg [127:0] fract3a;
 
reg [127:0] fract3b;
 
reg [127:0] fract3c;
 
reg [127:0] fract3d;
 
reg [127:0] fract4a;
 
reg [127:0] fract4b;
 
 
 
        always @(posedge clk)
 
        if (ce) begin
 
                p00 <= fracta1[15: 0] * fractb1[15: 0];
 
                p01 <= fracta1[31:16] * fractb1[15: 0];
 
                p02 <= fracta1[47:32] * fractb1[15: 0];
 
                p03 <= fracta1[63:48] * fractb1[15: 0];
 
 
 
                p10 <= fracta1[15: 0] * fractb1[31:16];
 
                p11 <= fracta1[31:16] * fractb1[31:16];
 
                p12 <= fracta1[47:32] * fractb1[31:16];
 
                p13 <= fracta1[63:48] * fractb1[31:16];
 
 
 
                p20 <= fracta1[15: 0] * fractb1[47:32];
 
                p21 <= fracta1[31:16] * fractb1[47:32];
 
                p22 <= fracta1[47:32] * fractb1[47:32];
 
                p23 <= fracta1[63:48] * fractb1[47:32];
 
 
 
                p30 <= fracta1[15: 0] * fractb1[63:48];
 
                p31 <= fracta1[31:16] * fractb1[63:48];
 
                p32 <= fracta1[47:32] * fractb1[63:48];
 
                p33 <= fracta1[63:48] * fractb1[63:48];
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract3a <= {p33,p31,p20,p00};
 
                fract3b <= {p32,p12,p10,16'b0} + {p23,p03,p01,16'b0};
 
                fract3c <= {p22,p11,32'b0} + {p13,p02,32'b0};
 
                fract3d <= {p12,48'b0} + {p03,48'b0};
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract4a <= fract3a + fract3b;
 
                fract4b <= fract3c + fract3d;
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract5 <= fract4a + fract4b;
 
        end
 
end
 
else if (FPWID+`EXTRA_BITS==64) begin
 
reg [35:0] p00,p01,p02;
 
reg [35:0] p10,p11,p12;
 
reg [35:0] p20,p21,p22;
 
reg [71:0] fract3a;
 
reg [89:0] fract3b;
 
reg [107:0] fract3c;
 
reg [108:0] fract4a;
 
reg [108:0] fract4b;
 
 
 
        always @(posedge clk)
 
        if (ce) begin
 
                p00 <= fracta1[17: 0] * fractb1[17: 0];
 
                p01 <= fracta1[35:18] * fractb1[17: 0];
 
                p02 <= fracta1[52:36] * fractb1[17: 0];
 
                p10 <= fracta1[17: 0] * fractb1[35:18];
 
                p11 <= fracta1[35:18] * fractb1[35:18];
 
                p12 <= fracta1[52:36] * fractb1[35:18];
 
                p20 <= fracta1[17: 0] * fractb1[52:36];
 
                p21 <= fracta1[35:18] * fractb1[52:36];
 
                p22 <= fracta1[52:36] * fractb1[52:36];
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract3a <= {p02,p00};
 
                fract3b <= {p21,p10,18'b0} + {p12,p01,18'b0};
 
                fract3c <= {p22,p20,36'b0} + {p11,36'b0};
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract4a <= fract3a + fract3b;
 
                fract4b <= fract3c;
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract5 <= fract4a + fract4b;
 
        end
 
end
 
else if (FPWID+`EXTRA_BITS==40) begin
 
reg [27:0] p00,p01,p02;
 
reg [27:0] p10,p11,p12;
 
reg [27:0] p20,p21,p22;
 
reg [79:0] fract3a;
 
reg [79:0] fract3b;
 
reg [79:0] fract3c;
 
reg [79:0] fract4a;
 
reg [79:0] fract4b;
 
        always @(posedge clk)
 
        if (ce) begin
 
                p00 <= fracta1[13: 0] * fractb1[13: 0];
 
                p01 <= fracta1[27:14] * fractb1[13: 0];
 
                p02 <= fracta1[39:28] * fractb1[13: 0];
 
                p10 <= fracta1[13: 0] * fractb1[27:14];
 
                p11 <= fracta1[27:14] * fractb1[27:14];
 
                p12 <= fracta1[39:28] * fractb1[27:14];
 
                p20 <= fracta1[13: 0] * fractb1[39:28];
 
                p21 <= fracta1[27:14] * fractb1[39:28];
 
                p22 <= fracta1[39:28] * fractb1[39:28];
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract3a <= {p02,p00};
 
                fract3b <= {p21,p10,18'b0} + {p12,p01,18'b0};
 
                fract3c <= {p22,p20,36'b0} + {p11,36'b0};
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract4a <= fract3a + fract3b;
 
                fract4b <= fract3c;
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract5 <= fract4a + fract4b;
 
        end
 
end
 
else if (FPWID+`EXTRA_BITS==32) begin
 
reg [23:0] p00,p01,p02;
 
reg [23:0] p10,p11,p12;
 
reg [23:0] p20,p21,p22;
 
reg [63:0] fract3a;
 
reg [63:0] fract3b;
 
reg [63:0] fract4;
 
 
 
        always @(posedge clk)
 
        if (ce) begin
 
                p00 <= fracta1[11: 0] * fractb1[11: 0];
 
                p01 <= fracta1[23:12] * fractb1[11: 0];
 
                p10 <= fracta1[11: 0] * fractb1[23:12];
 
                p11 <= fracta1[23:12] * fractb1[23:12];
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract3a <= {p11,p00};
 
                fract3b <= {p01,12'b0} + {p10,12'b0};
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract4 <= fract3a + fract3b;
 
        end
 
        always @(posedge clk)
 
        if (ce) begin
 
                fract5 <= fract4;
 
        end
 
end
end
else begin
else begin
reg [FX:0] p00;
        reg [FX:0] fract17a;
reg [FX:0] fract3;
 
reg [FX:0] fract4;
 
        always @(posedge clk)
        always @(posedge clk)
    if (ce) begin
                if (ce) fract17a <= fracta1 * fractb1;
        p00 <= fracta1 * fractb1;
        assign fract17 = fract17a;
    end
    end
        always @(posedge clk)
 
    if (ce)
 
        fract3 <= p00;
 
        always @(posedge clk)
 
    if (ce)
 
        fract4 <= fract3;
 
        always @(posedge clk)
 
    if (ce)
 
        fract5 <= fract4;
 
end
end
endgenerate
endgenerate
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #3
// Clock #3
// Select zero exponent
// Select zero exponent
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg [EMSB+2:0] ex3;
reg [EMSB+2:0] ex3;
reg [EMSB:0] xc3;
reg [EMSB:0] xc3;
always @(posedge clk)
always @(posedge clk)
        if (ce) ex3 <= abz2 ? 1'd0 : ex2;
        if (ce) ex3 <= abz2 ? 1'd0 : ex2;
always @(posedge clk)
always @(posedge clk)
        if (ce) xc3 <= xc2;
        if (ce) xc3 <= xc2;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #4
// Clock #4
// Generate partial products.
// Generate partial products.
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg [EMSB+2:0] ex4;
reg [EMSB+2:0] ex4;
reg [EMSB:0] xc4;
reg [EMSB:0] xc4;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) ex4 <= ex3;
        if (ce) ex4 <= ex3;
always @(posedge clk)
always @(posedge clk)
        if (ce) xc4 <= xc3;
        if (ce) xc4 <= xc3;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #5
// Clock #5
// Sum partial products (above)
// Sum partial products (above)
// compute multiplier overflow and underflow
// compute multiplier overflow and underflow
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
// Status
// Status
reg under5;
wire under5;
reg over5;
wire over5;
reg [EMSB+2:0] ex5;
wire [EMSB+2:0] ex5;
reg [EMSB:0] xc5;
wire [EMSB:0] xc5;
wire aInf5, bInf5;
wire aInf5, bInf5;
wire aNan5, bNan5;
wire aNan5, bNan5;
wire qNaNOut5;
wire qNaNOut5;
 
 
always @(posedge clk)
vtdl u5a (.clk(clk), .ce(ce), .a(MUL_LATENCY-5), .d(ex4[EMSB+2]), .q(under5));
        if (ce) under5 <= ex4[EMSB+2];
vtdl u5b (.clk(clk), .ce(ce), .a(MUL_LATENCY-5), .d((&ex4[EMSB:0] | ex4[EMSB+1]) & !ex4[EMSB+2]), .q(over5));
always @(posedge clk)
vtdl #(EMSB+3) u5c (.clk(clk), .ce(ce), .a(MUL_LATENCY-5), .d(ex4), .q(ex5));
        if (ce) over5 <= (&ex4[EMSB:0] | ex4[EMSB+1]) & !ex4[EMSB+2];
vtdl #(EMSB+1) u5d (.clk(clk), .ce(ce), .a(MUL_LATENCY-5), .d(xc4), .q(xc5));
always @(posedge clk)
 
        if (ce) ex5 <= ex4;
 
always @(posedge clk)
 
        if (ce) xc5 <= xc4;
 
 
 
delay4 u2a (.clk(clk), .ce(ce), .i(aInf1), .o(aInf5) );
vtdl u2a (.clk(clk), .ce(ce), .a(MUL_LATENCY-2), .d(aInf1), .q(aInf5) );
delay4 u2b (.clk(clk), .ce(ce), .i(bInf1), .o(bInf5) );
vtdl u2b (.clk(clk), .ce(ce), .a(MUL_LATENCY-2), .d(bInf1), .q(bInf5) );
 
 
// determine when a NaN is output
// determine when a NaN is output
wire [MSB:0] a5,b5;
wire [MSB:0] a5,b5;
delay4 u5 (.clk(clk), .ce(ce), .i((aInf1&bz1)|(bInf1&az1)), .o(qNaNOut5) );
vtdl u5 (.clk(clk), .ce(ce), .a(MUL_LATENCY-2), .d((aInf1&bz1)|(bInf1&az1)), .q(qNaNOut5) );
delay4 u14 (.clk(clk), .ce(ce), .i(aNan1), .o(aNan5) );
vtdl u14 (.clk(clk), .ce(ce), .a(MUL_LATENCY-2), .d(aNan1), .q(aNan5) );
delay4 u15 (.clk(clk), .ce(ce), .i(bNan1), .o(bNan5) );
vtdl u15 (.clk(clk), .ce(ce), .a(MUL_LATENCY-2), .d(bNan1), .q(bNan5) );
delay5 #(MSB+1) u16 (.clk(clk), .ce(ce), .i(a), .o(a5) );
vtdl #(MSB+1) u16 (.clk(clk), .ce(ce), .a(MUL_LATENCY-1), .d(a), .q(a5) );
delay5 #(MSB+1) u17 (.clk(clk), .ce(ce), .i(b), .o(b5) );
vtdl #(MSB+1) u17 (.clk(clk), .ce(ce), .a(MUL_LATENCY-1), .d(b), .q(b5) );
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #6
// Clock #6
// - figure multiplier mantissa output
// - figure multiplier mantissa output
// - figure multiplier exponent output
// - figure multiplier exponent output
// - correct xponent and mantissa for exceptional conditions
// - correct xponent and mantissa for exceptional conditions
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg [FX:0] mo6;
reg [FX:0] mo6;
reg [EMSB+2:0] ex6;
reg [EMSB+2:0] ex6;
reg [EMSB:0] xc6;
reg [EMSB:0] xc6;
wire [FMSB+1:0] fractc6;
wire [FMSB+1:0] fractc6;
vtdl #(FMSB+2) u61 (.clk(clk), .ce(ce), .a(4'd4), .d(fractc1), .q(fractc6) );
wire under6;
 
vtdl #(FMSB+2) u61 (.clk(clk), .ce(ce), .a(MUL_LATENCY-1), .d(fractc1), .q(fractc6) );
delay1 u62 (.clk(clk), .ce(ce), .i(under5), .o(under6));
delay1 u62 (.clk(clk), .ce(ce), .i(under5), .o(under6));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) xc6 <= xc5;
        if (ce) xc6 <= xc5;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce)
        if (ce)
                casez({aNan5,bNan5,qNaNOut5,aInf5,bInf5,over5})
                casez({aNan5,bNan5,qNaNOut5,aInf5,bInf5,over5})
                6'b1?????:  mo6 <= {1'b1,1'b1,a5[FMSB-1:0],{FMSB+1{1'b0}}};
                6'b1?????:  mo6 <= {1'b1,1'b1,a5[FMSB-1:0],{FMSB+1{1'b0}}};
    6'b01????:  mo6 <= {1'b1,1'b1,b5[FMSB-1:0],{FMSB+1{1'b0}}};
    6'b01????:  mo6 <= {1'b1,1'b1,b5[FMSB-1:0],{FMSB+1{1'b0}}};
                6'b001???:      mo6 <= {1'b1,qNaN|3'd4,{FMSB+1{1'b0}}}; // multiply inf * zero
                6'b001???:      mo6 <= {1'b1,qNaN|3'd4,{FMSB+1{1'b0}}}; // multiply inf * zero
                6'b0001??:      mo6 <= 0;        // mul inf's
                6'b0001??:      mo6 <= 0;        // mul inf's
                6'b00001?:      mo6 <= 0;        // mul inf's
                6'b00001?:      mo6 <= 0;        // mul inf's
                6'b000001:      mo6 <= 0;        // mul overflow
                6'b000001:      mo6 <= 0;        // mul overflow
                default:        mo6 <= fract5;
                default:        mo6 <= fract17;
                endcase
                endcase
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce)
        if (ce)
                casez({qNaNOut5|aNan5|bNan5,aInf5,bInf5,over5,under5})
                casez({qNaNOut5|aNan5|bNan5,aInf5,bInf5,over5,under5})
                5'b1????:       ex6 <= infXp;   // qNaN - infinity * zero
                5'b1????:       ex6 <= infXp;   // qNaN - infinity * zero
                5'b01???:       ex6 <= infXp;   // 'a' infinite
                5'b01???:       ex6 <= infXp;   // 'a' infinite
                5'b001??:       ex6 <= infXp;   // 'b' infinite
                5'b001??:       ex6 <= infXp;   // 'b' infinite
                5'b0001?:       ex6 <= infXp;   // result overflow
                5'b0001?:       ex6 <= infXp;   // result overflow
                5'b00001:       ex6 <= ex5;             //0;            // underflow
                5'b00001:       ex6 <= ex5;             //0;            // underflow
                default:        ex6 <= ex5;             // situation normal
                default:        ex6 <= ex5;             // situation normal
                endcase
                endcase
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #7
// Clock #7
// - prep for addition, determine greater operand
// - prep for addition, determine greater operand
// -----------------------------------------------------------
// -----------------------------------------------------------
reg ex_gt_xc7;
reg ex_gt_xc7;
reg xeq7;
reg xeq7;
reg ma_gt_mc7;
reg ma_gt_mc7;
reg meq7;
reg meq7;
wire az7, bz7, cz7;
wire az7, bz7, cz7;
wire realOp7;
wire realOp7;
 
 
// which has greater magnitude ? Used for sign calc
// which has greater magnitude ? Used for sign calc
always @(posedge clk)
always @(posedge clk)
        if (ce) ex_gt_xc7 <= $signed(ex6) > $signed({2'b0,xc6});
        if (ce) ex_gt_xc7 <= $signed(ex6) > $signed({2'b0,xc6});
always @(posedge clk)
always @(posedge clk)
        if (ce) xeq7 <= (ex6=={2'b0,xc6});
        if (ce) xeq7 <= (ex6=={2'b0,xc6});
always @(posedge clk)
always @(posedge clk)
        if (ce) ma_gt_mc7 <= mo6 > {fractc6,{FMSB+1{1'b0}}};
        if (ce) ma_gt_mc7 <= mo6 > {fractc6,{FMSB+1{1'b0}}};
always @(posedge clk)
always @(posedge clk)
        if (ce) meq7 <= mo6 == {fractc6,{FMSB+1{1'b0}}};
        if (ce) meq7 <= mo6 == {fractc6,{FMSB+1{1'b0}}};
vtdl #(1) u71 (.clk(clk), .ce(ce), .a(4'd5), .d(az1), .q(az7));
vtdl #(1,32) u71 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(az1), .q(az7));
vtdl #(1) u72 (.clk(clk), .ce(ce), .a(4'd5), .d(bz1), .q(bz7));
vtdl #(1,32) u72 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(bz1), .q(bz7));
vtdl #(1) u73 (.clk(clk), .ce(ce), .a(4'd5), .d(cz1), .q(cz7));
vtdl #(1,32) u73 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(cz1), .q(cz7));
vtdl #(1) u74 (.clk(clk), .ce(ce), .a(4'd4), .d(realOp2), .q(realOp7));
vtdl #(1,32) u74 (.clk(clk), .ce(ce), .a(MUL_LATENCY-1), .d(realOp2), .q(realOp7));
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #8
// Clock #8
// - prep for addition, determine greater operand
// - prep for addition, determine greater operand
// - determine if result will be zero
// - determine if result will be zero
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg a_gt_b8;
reg a_gt_b8;
reg resZero8;
reg resZero8;
reg ex_gt_xc8;
reg ex_gt_xc8;
wire [EMSB+2:0] ex8;
wire [EMSB+2:0] ex8;
wire [EMSB:0] xc8;
wire [EMSB:0] xc8;
wire xcInf8;
wire xcInf8;
wire [2:0] rm8;
wire [2:0] rm8;
wire op8;
wire op8;
wire sa8, sc8;
wire sa8, sc8;
 
 
delay2 #(EMSB+3) u81 (.clk(clk), .ce(ce), .i(ex6), .o(ex8));
delay2 #(EMSB+3) u81 (.clk(clk), .ce(ce), .i(ex6), .o(ex8));
delay2 #(EMSB+1) u82 (.clk(clk), .ce(ce), .i(xc6), .o(xc8));
delay2 #(EMSB+1) u82 (.clk(clk), .ce(ce), .i(xc6), .o(xc8));
vtdl #(1) u83 (.clk(clk), .ce(ce), .a(4'd5), .d(xcInf2), .q(xcInf8));
vtdl #(1,32) u83 (.clk(clk), .ce(ce), .a(MUL_LATENCY-1), .d(xcInf2), .q(xcInf8));
vtdl #(3) u84 (.clk(clk), .ce(ce), .a(4'd7), .d(rm), .q(rm8));
vtdl #(3,32) u84 (.clk(clk), .ce(ce), .a(MUL_LATENCY+1), .d(rm), .q(rm8));
vtdl #(1) u85 (.clk(clk), .ce(ce), .a(4'd6), .d(op1), .q(op8));
vtdl #(1,32) u85 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(op1), .q(op8));
vtdl #(1) u86 (.clk(clk), .ce(ce), .a(4'd6), .d(sa1 ^ sb1), .q(sa8));
vtdl #(1,32) u86 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(sa1 ^ sb1), .q(sa8));
vtdl #(1) u87 (.clk(clk), .ce(ce), .a(4'd6), .d(sc1), .q(sc8));
vtdl #(1,32) u87 (.clk(clk), .ce(ce), .a(MUL_LATENCY), .d(sc1), .q(sc8));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) ex_gt_xc8 <= ex_gt_xc7;
        if (ce) ex_gt_xc8 <= ex_gt_xc7;
always @(posedge clk)
always @(posedge clk)
        if (ce)
        if (ce)
                a_gt_b8 <= ex_gt_xc7 || (xeq7 && ma_gt_mc7);
                a_gt_b8 <= ex_gt_xc7 || (xeq7 && ma_gt_mc7);
 
 
// Find out if the result will be zero.
// Find out if the result will be zero.
always @(posedge clk)
always @(posedge clk)
        if (ce)
        if (ce)
                resZero8 <= (realOp7 & xeq7 & meq7) ||  // subtract, same magnitude
                resZero8 <= (realOp7 & xeq7 & meq7) ||  // subtract, same magnitude
                           ((az7 | bz7) & cz7);         // a or b zero and c zero
                           ((az7 | bz7) & cz7);         // a or b zero and c zero
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// CLock #9
// CLock #9
// Compute output exponent and sign
// Compute output exponent and sign
//
//
// The output exponent is the larger of the two exponents,
// The output exponent is the larger of the two exponents,
// unless a subtract operation is in progress and the two
// unless a subtract operation is in progress and the two
// numbers are equal, in which case the exponent should be
// numbers are equal, in which case the exponent should be
// zero.
// zero.
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
reg so9;
reg so9;
reg [EMSB+2:0] ex9;
reg [EMSB+2:0] ex9;
reg [EMSB+2:0] ex9a;
reg [EMSB+2:0] ex9a;
reg ex_gt_xc9;
reg ex_gt_xc9;
reg [EMSB:0] xc9;
reg [EMSB:0] xc9;
reg a_gt_c9;
reg a_gt_c9;
wire [FX:0] mo9;
wire [FX:0] mo9;
wire [FMSB+1:0] fractc9;
wire [FMSB+1:0] fractc9;
wire under9;
wire under9;
wire xeq9;
wire xeq9;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) ex_gt_xc9 <= ex_gt_xc8;
        if (ce) ex_gt_xc9 <= ex_gt_xc8;
always @(posedge clk)
always @(posedge clk)
        if (ce) a_gt_c9 <= a_gt_b8;
        if (ce) a_gt_c9 <= a_gt_b8;
always @(posedge clk)
always @(posedge clk)
        if (ce) xc9 <= xc8;
        if (ce) xc9 <= xc8;
always @(posedge clk)
always @(posedge clk)
        if (ce) ex9a <= ex8;
        if (ce) ex9a <= ex8;
 
 
delay3 #(FX+1) u93 (.clk(clk), .ce(ce), .i(mo6), .o(mo9));
delay3 #(FX+1) u93 (.clk(clk), .ce(ce), .i(mo6), .o(mo9));
delay3 #(FMSB+2) u94 (.clk(clk), .ce(ce), .i(fractc6), .o(fractc9));
delay3 #(FMSB+2) u94 (.clk(clk), .ce(ce), .i(fractc6), .o(fractc9));
delay3 u95 (.clk(clk), .ce(ce), .i(under6), .o(under9));
delay3 u95 (.clk(clk), .ce(ce), .i(under6), .o(under9));
delay2 u96 (.clk(clk), .ce(ce), .i(xeq7), .o(xeq9));
delay2 u96 (.clk(clk), .ce(ce), .i(xeq7), .o(xeq9));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) ex9 <= resZero8 ? 1'd0 : ex_gt_xc8 ? ex8 : {2'b0,xc8};
        if (ce) ex9 <= resZero8 ? 1'd0 : ex_gt_xc8 ? ex8 : {2'b0,xc8};
 
 
// Compute output sign
// Compute output sign
always @(posedge clk)
always @(posedge clk)
        if (ce)
        if (ce)
        case ({resZero8,sa8,op8,sc8})   // synopsys full_case parallel_case
        case ({resZero8,sa8,op8,sc8})   // synopsys full_case parallel_case
        4'b0000: so9 <= 0;                       // + + + = +
        4'b0000: so9 <= 0;                       // + + + = +
        4'b0001: so9 <= !a_gt_b8;       // + + - = sign of larger
        4'b0001: so9 <= !a_gt_b8;       // + + - = sign of larger
        4'b0010: so9 <= !a_gt_b8;       // + - + = sign of larger
        4'b0010: so9 <= !a_gt_b8;       // + - + = sign of larger
        4'b0011: so9 <= 0;                       // + - - = +
        4'b0011: so9 <= 0;                       // + - - = +
        4'b0100: so9 <= a_gt_b8;                // - + + = sign of larger
        4'b0100: so9 <= a_gt_b8;                // - + + = sign of larger
        4'b0101: so9 <= 1;                      // - + - = -
        4'b0101: so9 <= 1;                      // - + - = -
        4'b0110: so9 <= 1;                      // - - + = -
        4'b0110: so9 <= 1;                      // - - + = -
        4'b0111: so9 <= a_gt_b8;                // - - - = sign of larger
        4'b0111: so9 <= a_gt_b8;                // - - - = sign of larger
        4'b1000: so9 <= 0;                       //  A +  B, sign = +
        4'b1000: so9 <= 0;                       //  A +  B, sign = +
        4'b1001: so9 <= rm8==3;         //  A + -B, sign = + unless rounding down
        4'b1001: so9 <= rm8==3;         //  A + -B, sign = + unless rounding down
        4'b1010: so9 <= rm8==3;         //  A -  B, sign = + unless rounding down
        4'b1010: so9 <= rm8==3;         //  A -  B, sign = + unless rounding down
        4'b1011: so9 <= 0;                       // +A - -B, sign = +
        4'b1011: so9 <= 0;                       // +A - -B, sign = +
        4'b1100: so9 <= rm8==3;         // -A +  B, sign = + unless rounding down
        4'b1100: so9 <= rm8==3;         // -A +  B, sign = + unless rounding down
        4'b1101: so9 <= 1;                      // -A + -B, sign = -
        4'b1101: so9 <= 1;                      // -A + -B, sign = -
        4'b1110: so9 <= 1;                      // -A - +B, sign = -
        4'b1110: so9 <= 1;                      // -A - +B, sign = -
        4'b1111: so9 <= rm8==3;         // -A - -B, sign = + unless rounding down
        4'b1111: so9 <= rm8==3;         // -A - -B, sign = + unless rounding down
        endcase
        endcase
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #10
// Clock #10
// Compute the difference in exponents, provides shift amount
// Compute the difference in exponents, provides shift amount
// Note that ex9a will be negative for an underflow condition
// Note that ex9a will be negative for an underflow condition
// so it's added rather than subtracted from xc9 as -(-num)
// so it's added rather than subtracted from xc9 as -(-num)
// is the same as an add. The underflow is tracked rather than
// is the same as an add. The underflow is tracked rather than
// using extra bits in the exponent.
// using extra bits in the exponent.
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [EMSB+2:0] xdiff10;
reg [EMSB+2:0] xdiff10;
reg [FX:0] mfs;
reg [FX:0] mfs;
reg ops10;
reg ops10;
 
 
// If the multiplier exponent was negative (underflowed) then
// If the multiplier exponent was negative (underflowed) then
// the mantissa needs to be shifted right even more (until
// the mantissa needs to be shifted right even more (until
// the exponent is zero. The total shift would be xc9-0-
// the exponent is zero. The total shift would be xc9-0-
// amount underflows which is xc9 + -ex9a.
// amount underflows which is xc9 + -ex9a.
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) xdiff10 <= ex_gt_xc9 ? ex9a - xc9
        if (ce) xdiff10 <= ex_gt_xc9 ? ex9a - xc9
                                                                                : ex9a[EMSB+2] ? xc9 + (~ex9a+2'd1)
                                                                                : ex9a[EMSB+2] ? xc9 + (~ex9a+2'd1)
                                                                                : xc9 - ex9a;
                                                                                : xc9 - ex9a;
 
 
// Determine which fraction to denormalize (the one with the
// Determine which fraction to denormalize (the one with the
// smaller exponent is denormalized). If the exponents are equal
// smaller exponent is denormalized). If the exponents are equal
// denormalize the smaller fraction.
// denormalize the smaller fraction.
always @(posedge clk)
always @(posedge clk)
        if (ce) mfs <=
        if (ce) mfs <=
                xeq9 ? (a_gt_c9 ? {4'b0,fractc9,{FMSB+1{1'b0}}} : mo9)
                xeq9 ? (a_gt_c9 ? {4'b0,fractc9,{FMSB+1{1'b0}}} : mo9)
                 : ex_gt_xc9 ? {4'b0,fractc9,{FMSB+1{1'b0}}} : mo9;
                 : ex_gt_xc9 ? {4'b0,fractc9,{FMSB+1{1'b0}}} : mo9;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) ops10 <= xeq9 ? (a_gt_c9 ? 1'b1 : 1'b0)
        if (ce) ops10 <= xeq9 ? (a_gt_c9 ? 1'b1 : 1'b0)
                                                                                                : (ex_gt_xc9 ? 1'b1 : 1'b0);
                                                                                                : (ex_gt_xc9 ? 1'b1 : 1'b0);
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #11
// Clock #11
// Limit the size of the shifter to only bits needed.
// Limit the size of the shifter to only bits needed.
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [7:0] xdif11;
reg [7:0] xdif11;
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) xdif11 <= xdiff10 > FX+3 ? FX+3 : xdiff10;
        if (ce) xdif11 <= xdiff10 > FX+3 ? FX+3 : xdiff10;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #12
// Clock #12
// Determine the sticky bit
// Determine the sticky bit
// -----------------------------------------------------------
// -----------------------------------------------------------
 
 
wire sticky, sticky12;
wire sticky, sticky12;
wire [FX:0] mfs12;
wire [FX:0] mfs12;
wire [7:0] xdif12;
wire [7:0] xdif12;
 
 
generate
generate
begin
begin
if (FPWID+`EXTRA_BITS==128)
if (FPWID==128)
    redor128 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
    redor128 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
else if (FPWID+`EXTRA_BITS==96)
else if (FPWID==80)
    redor96 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
 
else if (FPWID+`EXTRA_BITS==84)
 
    redor84 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
 
else if (FPWID+`EXTRA_BITS==80)
 
    redor80 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
    redor80 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
else if (FPWID+`EXTRA_BITS==64)
else if (FPWID==64)
    redor64 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
    redor64 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
else if (FPWID+`EXTRA_BITS==32)
else if (FPWID==32)
    redor32 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
    redor32 u121 (.a(xdif11), .b({mfs,2'b0}), .o(sticky) );
end
end
endgenerate
endgenerate
 
 
// register inputs to shifter and shift
// register inputs to shifter and shift
delay1 #(1)    u122(.clk(clk), .ce(ce), .i(sticky), .o(sticky12) );
delay1 #(1)    u122(.clk(clk), .ce(ce), .i(sticky), .o(sticky12) );
delay1 #(8)    u123(.clk(clk), .ce(ce), .i(xdif11),   .o(xdif12) );
delay1 #(8)    u123(.clk(clk), .ce(ce), .i(xdif11),   .o(xdif12) );
delay2 #(FX+1) u124(.clk(clk), .ce(ce), .i(mfs), .o(mfs12) );
delay2 #(FX+1) u124(.clk(clk), .ce(ce), .i(mfs), .o(mfs12) );
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #13
// Clock #13
// - denormalize operand (shift right)
// - denormalize operand (shift right)
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [FX+2:0] mfs13;
reg [FX+2:0] mfs13;
wire [FX:0] mo13;
wire [FX:0] mo13;
wire ex_gt_xc13;
wire ex_gt_xc13;
wire [FMSB+1:0] fractc13;
wire [FMSB+1:0] fractc13;
wire ops13;
wire ops13;
 
 
delay4 #(FX+1) u131 (.clk(clk), .ce(ce), .i(mo9), .o(mo13));
delay4 #(FX+1) u131 (.clk(clk), .ce(ce), .i(mo9), .o(mo13));
delay4 u132 (.clk(clk), .ce(ce), .i(ex_gt_xc9), .o(ex_gt_xc13));
delay4 u132 (.clk(clk), .ce(ce), .i(ex_gt_xc9), .o(ex_gt_xc13));
vtdl #(FMSB+2) u133 (.clk(clk), .ce(ce), .a(4'd3), .d(fractc9), .q(fractc13));
vtdl #(FMSB+2) u133 (.clk(clk), .ce(ce), .a(4'd3), .d(fractc9), .q(fractc13));
delay3 u134 (.clk(clk), .ce(ce), .i(ops10), .o(ops13));
delay3 u134 (.clk(clk), .ce(ce), .i(ops10), .o(ops13));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) mfs13 <= ({mfs12,2'b0} >> xdif12)|sticky12;
        if (ce) mfs13 <= ({mfs12,2'b0} >> xdif12)|sticky12;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #14
// Clock #14
// Sort operands
// Sort operands
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [FX+2:0] oa, ob;
reg [FX+2:0] oa, ob;
wire a_gt_b14;
wire a_gt_b14;
 
 
vtdl #(1) u141 (.clk(clk), .ce(ce), .a(4'd5), .d(a_gt_b8), .q(a_gt_b14));
vtdl #(1) u141 (.clk(clk), .ce(ce), .a(4'd5), .d(a_gt_b8), .q(a_gt_b14));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) oa <= ops13 ? {mo13,2'b00} : mfs13;
        if (ce) oa <= ops13 ? {mo13,2'b00} : mfs13;
always @(posedge clk)
always @(posedge clk)
        if (ce) ob <= ops13 ? mfs13 : {fractc13,{FMSB+1{1'b0}},2'b00};
        if (ce) ob <= ops13 ? mfs13 : {fractc13,{FMSB+1{1'b0}},2'b00};
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #15
// Clock #15
// - Sort operands
// - Sort operands
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [FX+2:0] oaa, obb;
reg [FX+2:0] oaa, obb;
wire realOp15;
wire realOp15;
wire [EMSB:0] ex15;
wire [EMSB:0] ex15;
wire [EMSB:0] ex9c = ex9[EMSB+1] ? infXp : ex9[EMSB:0];
wire [EMSB:0] ex9c = ex9[EMSB+1] ? infXp : ex9[EMSB:0];
wire overflow15;
wire overflow15;
vtdl #(1) u151 (.clk(clk), .ce(ce), .a(4'd7), .d(realOp7), .q(realOp15));
vtdl #(1) u151 (.clk(clk), .ce(ce), .a(4'd7), .d(realOp7), .q(realOp15));
vtdl #(EMSB+1) u152 (.clk(clk), .ce(ce), .a(4'd5), .d(ex9c), .q(ex15));
vtdl #(EMSB+1) u152 (.clk(clk), .ce(ce), .a(4'd5), .d(ex9c), .q(ex15));
vtdl #(EMSB+1) u153 (.clk(clk), .ce(ce), .a(4'd5), .d(ex9[EMSB+1]| &ex9[EMSB:0]), .q(overflow15));
vtdl #(EMSB+1) u153 (.clk(clk), .ce(ce), .a(4'd5), .d(ex9[EMSB+1]| &ex9[EMSB:0]), .q(overflow15));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) oaa <= a_gt_b14 ? oa : ob;
        if (ce) oaa <= a_gt_b14 ? oa : ob;
always @(posedge clk)
always @(posedge clk)
        if (ce) obb <= a_gt_b14 ? ob : oa;
        if (ce) obb <= a_gt_b14 ? ob : oa;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #16
// Clock #16
// - perform add/subtract
// - perform add/subtract
// - addition can generate an extra bit, subtract can't go negative
// - addition can generate an extra bit, subtract can't go negative
// -----------------------------------------------------------
// -----------------------------------------------------------
reg [FX+3:0] mab;
reg [FX+3:0] mab;
wire [FX:0] mo16;
wire [FX:0] mo16;
wire [FMSB+1:0] fractc16;
wire [FMSB+1:0] fractc16;
wire Nan16;
wire Nan16;
wire cNan16;
wire cNan16;
wire aInf16, cInf16;
wire aInf16, cInf16;
wire op16;
wire op16;
wire exinf16;
wire exinf16;
 
 
vtdl #(1) u161 (.clk(clk), .ce(ce), .a(4'd10), .d(qNaNOut5|aNan5|bNan5), .q(Nan16));
vtdl #(1) u161 (.clk(clk), .ce(ce), .a(4'd10), .d(qNaNOut5|aNan5|bNan5), .q(Nan16));
vtdl #(1) u162 (.clk(clk), .ce(ce), .a(4'd14), .d(cNan1), .q(cNan16));
vtdl #(1) u162 (.clk(clk), .ce(ce), .a(4'd14), .d(cNan1), .q(cNan16));
vtdl #(1) u163 (.clk(clk), .ce(ce), .a(4'd9), .d(&ex6), .q(aInf16));
vtdl #(1) u163 (.clk(clk), .ce(ce), .a(4'd9), .d(&ex6), .q(aInf16));
vtdl #(1) u164 (.clk(clk), .ce(ce), .a(4'd14), .d(cInf1), .q(cInf16));
vtdl #(1) u164 (.clk(clk), .ce(ce), .a(4'd14), .d(cInf1), .q(cInf16));
vtdl #(1) u165 (.clk(clk), .ce(ce), .a(4'd14), .d(op1), .q(op16));
vtdl #(1) u165 (.clk(clk), .ce(ce), .a(4'd14), .d(op1), .q(op16));
delay3 #(FX+1) u166 (.clk(clk), .ce(ce), .i(mo13), .o(mo16));
delay3 #(FX+1) u166 (.clk(clk), .ce(ce), .i(mo13), .o(mo16));
vtdl #(FMSB+2) u167 (.clk(clk), .ce(ce), .a(4'd6), .d(fractc9), .q(fractc16));
vtdl #(FMSB+2) u167 (.clk(clk), .ce(ce), .a(4'd6), .d(fractc9), .q(fractc16));
delay1 u169 (.clk(clk), .ce(ce), .i(&ex15), .o(exinf16));
delay1 u169 (.clk(clk), .ce(ce), .i(&ex15), .o(exinf16));
 
 
always @(posedge clk)
always @(posedge clk)
        if (ce) mab <= realOp15 ? oaa - obb : oaa + obb;
        if (ce) mab <= realOp15 ? oaa - obb : oaa + obb;
 
 
// -----------------------------------------------------------
// -----------------------------------------------------------
// Clock #17
// Clock #17
// - adjust for Nans
// - adjust for Nans
// -----------------------------------------------------------
// -----------------------------------------------------------
wire [EMSB:0] ex17;
wire [EMSB:0] ex17;
reg [FX:0] mo17;
reg [FX:0] mo17;
wire so17;
wire so17;
wire exinf17;
wire exinf17;
wire overflow17;
wire overflow17;
 
 
vtdl #(1)        u171 (.clk(clk), .ce(ce), .a(4'd7), .d(so9), .q(so17));
vtdl #(1)        u171 (.clk(clk), .ce(ce), .a(4'd7), .d(so9), .q(so17));
delay2 #(EMSB+1) u172 (.clk(clk), .ce(ce), .i(ex15), .o(ex17));
delay2 #(EMSB+1) u172 (.clk(clk), .ce(ce), .i(ex15), .o(ex17));
delay1 #(1) u173 (.clk(clk), .ce(ce), .i(exinf16), .o(exinf17));
delay1 #(1) u173 (.clk(clk), .ce(ce), .i(exinf16), .o(exinf17));
delay2 u174 (.clk(clk), .ce(ce), .i(overflow15), .o(overflow17));
delay2 u174 (.clk(clk), .ce(ce), .i(overflow15), .o(overflow17));
 
 
always @(posedge clk)
always @(posedge clk)
        casez({aInf16&cInf16,Nan16,cNan16,exinf16})
        casez({aInf16&cInf16,Nan16,cNan16,exinf16})
        4'b1???:        mo17 <= {1'b0,op16,{FMSB-1{1'b0}},op16,{FMSB{1'b0}}};   // inf +/- inf - generate QNaN on subtract, inf on add
        4'b1???:        mo17 <= {1'b0,op16,{FMSB-1{1'b0}},op16,{FMSB{1'b0}}};   // inf +/- inf - generate QNaN on subtract, inf on add
        4'b01??:        mo17 <= {1'b0,mo16};
        4'b01??:        mo17 <= {1'b0,mo16};
        4'b001?:        mo17 <= {1'b1,1'b1,fractc16[FMSB-1:0],{FMSB+1{1'b0}}};
        4'b001?:        mo17 <= {1'b1,1'b1,fractc16[FMSB-1:0],{FMSB+1{1'b0}}};
        4'b0001:        mo17 <= 1'd0;
        4'b0001:        mo17 <= 1'd0;
        default:        mo17 <= mab[FX+3:2];            // mab has two extra lead bits and two trailing bits
        default:        mo17 <= mab[FX+3:2];            // mab has two extra lead bits and two trailing bits
        endcase
        endcase
 
 
assign o = {so17,ex17,mo17};
assign o = {so17,ex17,mo17};
assign zero = {ex17,mo17}==1'd0;
assign zero = {ex17,mo17}==1'd0;
assign inf = exinf17;
assign inf = exinf17;
assign under = ex17==1'd0;
assign under = ex17==1'd0;
assign over = overflow17;
assign over = overflow17;
 
 
endmodule
endmodule
 
 
 
 
// Multiplier with normalization and rounding.
// Multiplier with normalization and rounding.
 
 
module fpFMAnr(clk, ce, op, rm, a, b, c, o, inf, zero, overflow, underflow, inexact);
module fpFMAnr(clk, ce, op, rm, a, b, c, o, inf, zero, overflow, underflow, inexact);
parameter FPWID=64;
parameter FPWID=128;
`include "fpSize.sv"
`include "fpSize.sv"
 
 
input clk;
input clk;
input ce;
input ce;
input op;
input op;
input [2:0] rm;
input [2:0] rm;
input  [MSB:0] a, b, c;
input  [MSB:0] a, b, c;
output [MSB:0] o;
output [MSB:0] o;
output zero;
output zero;
output inf;
output inf;
output overflow;
output overflow;
output underflow;
output underflow;
output inexact;
output inexact;
 
 
wire [EX:0] fma_o;
wire [EX:0] fma_o;
wire fma_underflow;
wire fma_underflow;
wire fma_overflow;
wire fma_overflow;
wire norm_underflow;
wire norm_underflow;
wire norm_inexact;
wire norm_inexact;
wire sign_exe1, inf1, overflow1, underflow1;
wire sign_exe1, inf1, overflow1, underflow1;
wire [MSB+3:0] fpn0;
wire [MSB+3:0] fpn0;
 
 
fpFMA #(FPWID) u1
fpFMA #(FPWID) u1
(
(
        .clk(clk),
        .clk(clk),
        .ce(ce),
        .ce(ce),
        .op(op),
        .op(op),
        .rm(rm),
        .rm(rm),
        .a(a),
        .a(a),
        .b(b),
        .b(b),
        .c(c),
        .c(c),
        .o(fma_o),
        .o(fma_o),
        .under(fma_underflow),
        .under(fma_underflow),
        .over(fma_overflow),
        .over(fma_overflow),
        .zero(),
        .zero(),
        .inf()
        .inf()
);
);
fpNormalize #(FPWID) u2
fpNormalize #(FPWID) u2
(
(
        .clk(clk),
        .clk(clk),
        .ce(ce),
        .ce(ce),
        .i(fma_o),
        .i(fma_o),
        .o(fpn0),
        .o(fpn0),
        .under_i(fma_underflow),
        .under_i(fma_underflow),
        .under_o(norm_underflow),
        .under_o(norm_underflow),
        .inexact_o(norm_inexact)
        .inexact_o(norm_inexact)
);
);
fpRound         #(FPWID) u3(.clk(clk), .ce(ce), .rm(rm), .i(fpn0), .o(o) );
fpRound         #(FPWID) u3(.clk(clk), .ce(ce), .rm(rm), .i(fpn0), .o(o) );
fpDecomp        #(FPWID) u4(.i(o), .xz(), .vz(zero), .inf(inf));
fpDecomp        #(FPWID) u4(.i(o), .xz(), .vz(zero), .inf(inf));
vtdl                                            u5 (.clk(clk), .ce(ce), .a(4'd11), .d(fma_underflow), .q(underflow));
vtdl                                            u5 (.clk(clk), .ce(ce), .a(4'd11), .d(fma_underflow), .q(underflow));
vtdl                                            u6 (.clk(clk), .ce(ce), .a(4'd11), .d(fma_overflow), .q(overflow));
vtdl                                            u6 (.clk(clk), .ce(ce), .a(4'd11), .d(fma_overflow), .q(overflow));
delay3          #(1)    u7 (.clk(clk), .ce(ce), .i(norm_inexact), .o(inexact));
delay3          #(1)    u7 (.clk(clk), .ce(ce), .i(norm_inexact), .o(inexact));
assign overflow = inf;
assign overflow = inf;
 
 
endmodule
endmodule
 
 
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.