//////////////////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////////////////
|
// Company:
|
// Company:
|
// Engineer:
|
// Engineer:
|
//
|
//
|
// Create Date: 11:51:27 10/29/2009
|
// Create Date: 11:51:27 10/29/2009
|
// Design Name:
|
// Design Name:
|
// Module Name: minsoc_spartan_3a_starter_kit_ios
|
// Module Name: minsoc_spartan_3a_starter_kit_ios
|
// Project Name:
|
// Project Name:
|
// Target Devices:
|
// Target Devices:
|
// Tool versions:
|
// Tool versions:
|
// Description:
|
// Description:
|
//
|
//
|
// Dependencies:
|
// Dependencies:
|
//
|
//
|
// Revision:
|
// Revision:
|
// Revision 0.01 - File Created
|
// Revision 0.01 - File Created
|
// Additional Comments:
|
// Additional Comments:
|
//
|
//
|
//////////////////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////////////////
|
|
|
module minsoc_spartan_3a_starter_kit_ios
|
module minsoc_spartan_3a_starter_kit_ios
|
(
|
(
|
// Signals from GPIO Core
|
// Signals from GPIO Core
|
ext_pad_o,
|
ext_pad_o,
|
ext_pad_oe,
|
ext_pad_oe,
|
ext_pad_i,
|
ext_pad_i,
|
|
|
// Signals driving external pins
|
// Signals driving external pins
|
i_pins,
|
i_pins,
|
o_pins,
|
o_pins,
|
io_pins
|
io_pins
|
);
|
);
|
parameter gpio_num = 32;
|
parameter gpio_num = 32;
|
parameter i_line_num = 8;
|
parameter i_line_num = 8;
|
parameter o_line_num = 8;
|
parameter o_line_num = 8;
|
parameter io_line_num= 8;
|
parameter io_line_num= 8;
|
|
|
input [gpio_num-1:0] ext_pad_o;
|
input [gpio_num-1:0] ext_pad_o;
|
input [gpio_num-1:0] ext_pad_oe;
|
input [gpio_num-1:0] ext_pad_oe;
|
output [gpio_num-1:0] ext_pad_i;
|
output [gpio_num-1:0] ext_pad_i;
|
|
|
input [i_line_num-1:0] i_pins;
|
input [i_line_num-1:0] i_pins;
|
output [o_line_num-1:0] o_pins;
|
output [o_line_num-1:0] o_pins;
|
inout [io_line_num-1:0] io_pins;
|
inout [io_line_num-1:0] io_pins;
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_0 (
|
) IOBUF_inst_0 (
|
.O(ext_pad_i[0]), // Buffer output
|
.O(ext_pad_i[0]), // Buffer output
|
.IO(io_pins[0]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[0]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[0]), // Buffer input
|
.I(ext_pad_o[0]), // Buffer input
|
.T(~ext_pad_oe[0]) // 3-state enable input
|
.T(~ext_pad_oe[0]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_1 (
|
) IOBUF_inst_1 (
|
.O(ext_pad_i[1]), // Buffer output
|
.O(ext_pad_i[1]), // Buffer output
|
.IO(io_pins[1]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[1]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[1]), // Buffer input
|
.I(ext_pad_o[1]), // Buffer input
|
.T(~ext_pad_oe[1]) // 3-state enable input
|
.T(~ext_pad_oe[1]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_2 (
|
) IOBUF_inst_2 (
|
.O(ext_pad_i[2]), // Buffer output
|
.O(ext_pad_i[2]), // Buffer output
|
.IO(io_pins[2]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[2]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[2]), // Buffer input
|
.I(ext_pad_o[2]), // Buffer input
|
.T(~ext_pad_oe[2]) // 3-state enable input
|
.T(~ext_pad_oe[2]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_3 (
|
) IOBUF_inst_3 (
|
.O(ext_pad_i[3]), // Buffer output
|
.O(ext_pad_i[3]), // Buffer output
|
.IO(io_pins[3]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[3]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[3]), // Buffer input
|
.I(ext_pad_o[3]), // Buffer input
|
.T(~ext_pad_oe[3]) // 3-state enable input
|
.T(~ext_pad_oe[3]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_4 (
|
) IOBUF_inst_4 (
|
.O(ext_pad_i[4]), // Buffer output
|
.O(ext_pad_i[4]), // Buffer output
|
.IO(io_pins[4]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[4]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[4]), // Buffer input
|
.I(ext_pad_o[4]), // Buffer input
|
.T(~ext_pad_oe[4]) // 3-state enable input
|
.T(~ext_pad_oe[4]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_5 (
|
) IOBUF_inst_5 (
|
.O(ext_pad_i[5]), // Buffer output
|
.O(ext_pad_i[5]), // Buffer output
|
.IO(io_pins[5]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[5]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[5]), // Buffer input
|
.I(ext_pad_o[5]), // Buffer input
|
.T(~ext_pad_oe[5]) // 3-state enable input
|
.T(~ext_pad_oe[5]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_6 (
|
) IOBUF_inst_6 (
|
.O(ext_pad_i[6]), // Buffer output
|
.O(ext_pad_i[6]), // Buffer output
|
.IO(io_pins[6]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[6]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[6]), // Buffer input
|
.I(ext_pad_o[6]), // Buffer input
|
.T(~ext_pad_oe[6]) // 3-state enable input
|
.T(~ext_pad_oe[6]) // 3-state enable input
|
);
|
);
|
|
|
IOBUF #(
|
IOBUF #(
|
.DRIVE(12), // Specify the output drive strength
|
.DRIVE(12), // Specify the output drive strength
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for the buffer, "0"-"16" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input register, "AUTO", "0"-"8" (Spartan-3E only)
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.IOSTANDARD("DEFAULT"), // Specify the I/O standard
|
.SLEW("SLOW") // Specify the output slew rate
|
.SLEW("SLOW") // Specify the output slew rate
|
) IOBUF_inst_7 (
|
) IOBUF_inst_7 (
|
.O(ext_pad_i[7]), // Buffer output
|
.O(ext_pad_i[7]), // Buffer output
|
.IO(io_pins[7]), // Buffer inout port (connect directly to top-level port)
|
.IO(io_pins[7]), // Buffer inout port (connect directly to top-level port)
|
.I(ext_pad_o[7]), // Buffer input
|
.I(ext_pad_o[7]), // Buffer input
|
.T(~ext_pad_oe[7]) // 3-state enable input
|
.T(~ext_pad_oe[7]) // 3-state enable input
|
);
|
);
|
|
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_0 (
|
)IBUF_inst_0 (
|
.O(ext_pad_i[8]), // Buffer output
|
.O(ext_pad_i[8]), // Buffer output
|
.I(i_pins[0]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[0]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_1 (
|
)IBUF_inst_1 (
|
.O(ext_pad_i[9]), // Buffer output
|
.O(ext_pad_i[9]), // Buffer output
|
.I(i_pins[1]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[1]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_2 (
|
)IBUF_inst_2 (
|
.O(ext_pad_i[10]), // Buffer output
|
.O(ext_pad_i[10]), // Buffer output
|
.I(i_pins[2]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[2]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_3 (
|
)IBUF_inst_3 (
|
.O(ext_pad_i[11]), // Buffer output
|
.O(ext_pad_i[11]), // Buffer output
|
.I(i_pins[3]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[3]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_4 (
|
)IBUF_inst_4 (
|
.O(ext_pad_i[12]), // Buffer output
|
.O(ext_pad_i[12]), // Buffer output
|
.I(i_pins[4]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[4]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_5 (
|
)IBUF_inst_5 (
|
.O(ext_pad_i[13]), // Buffer output
|
.O(ext_pad_i[13]), // Buffer output
|
.I(i_pins[5]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[5]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
|
|
/* PUSH Button NORTH is RESET.
|
/* PUSH Button NORTH is RESET.
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_6 (
|
)IBUF_inst_6 (
|
.O(ext_pad_i[14]), // Buffer output
|
.O(ext_pad_i[14]), // Buffer output
|
.I(i_pins[6]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[6]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
*/
|
*/
|
|
|
IBUF #(
|
IBUF #(
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IBUF_DELAY_VALUE("0"), // Specify the amount of added input delay for // the buffer, "0"-"16" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IFD_DELAY_VALUE("AUTO"), // Specify the amount of added delay for input // register, "AUTO", "0"-"8" (Spartan-3E/3A only)
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
.IOSTANDARD("DEFAULT") // Specify the input I/O standard
|
)IBUF_inst_7 (
|
)IBUF_inst_7 (
|
.O(ext_pad_i[15]), // Buffer output
|
.O(ext_pad_i[15]), // Buffer output
|
.I(i_pins[7]) // Buffer input (connect directly to top-level port)
|
.I(i_pins[7]) // Buffer input (connect directly to top-level port)
|
);
|
);
|
endmodule
|
endmodule
|
|
|