// #################################################################################################
|
// #################################################################################################
|
// # << NEORV32 - Blinking LED Demo Program >> #
|
// # << NEORV32 - Blinking LED Demo Program >> #
|
// # ********************************************************************************************* #
|
// # ********************************************************************************************* #
|
// # BSD 3-Clause License #
|
// # BSD 3-Clause License #
|
// # #
|
// # #
|
// # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
|
// # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
|
// # #
|
// # #
|
// # Redistribution and use in source and binary forms, with or without modification, are #
|
// # Redistribution and use in source and binary forms, with or without modification, are #
|
// # permitted provided that the following conditions are met: #
|
// # permitted provided that the following conditions are met: #
|
// # #
|
// # #
|
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
// # conditions and the following disclaimer. #
|
// # conditions and the following disclaimer. #
|
// # #
|
// # #
|
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
// # conditions and the following disclaimer in the documentation and/or other materials #
|
// # conditions and the following disclaimer in the documentation and/or other materials #
|
// # provided with the distribution. #
|
// # provided with the distribution. #
|
// # #
|
// # #
|
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
// # endorse or promote products derived from this software without specific prior written #
|
// # endorse or promote products derived from this software without specific prior written #
|
// # permission. #
|
// # permission. #
|
// # #
|
// # #
|
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
// # ********************************************************************************************* #
|
// # ********************************************************************************************* #
|
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
// #################################################################################################
|
// #################################################################################################
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* @file blink_led/main.c
|
* @file blink_led/main.c
|
* @author Stephan Nolting
|
* @author Stephan Nolting
|
* @brief Simple blinking LED demo program using the lowest 8 bits of the GPIO.output port.
|
* @brief Simple blinking LED demo program using the lowest 8 bits of the GPIO.output port.
|
**************************************************************************/
|
**************************************************************************/
|
|
|
#include <neorv32.h>
|
#include <neorv32.h>
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* @name User configuration
|
* @name User configuration
|
**************************************************************************/
|
**************************************************************************/
|
/**@{*/
|
/**@{*/
|
/** UART BAUD rate */
|
/** UART BAUD rate */
|
#define BAUD_RATE 19200
|
#define BAUD_RATE 19200
|
/** Use the custom ASM version for blinking the LEDs defined (= uncommented) */
|
/** Use the custom ASM version for blinking the LEDs defined (= uncommented) */
|
//#define USE_ASM_VERSION
|
//#define USE_ASM_VERSION
|
/**@}*/
|
/**@}*/
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* ASM function to blink LEDs
|
* ASM function to blink LEDs
|
**************************************************************************/
|
**************************************************************************/
|
extern void blink_led_asm(uint32_t gpio_out_addr);
|
extern void blink_led_asm(uint32_t gpio_out_addr);
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* C function to blink LEDs
|
* C function to blink LEDs
|
**************************************************************************/
|
**************************************************************************/
|
void blink_led_c(void);
|
void blink_led_c(void);
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Main function; shows an incrementing 8-bit counter on GPIO.output(7:0).
|
* Main function; shows an incrementing 8-bit counter on GPIO.output(7:0).
|
*
|
*
|
* @note This program requires the GPIO controller to be synthesized (the UART is optional).
|
* @note This program requires the GPIO controller to be synthesized (the UART is optional).
|
*
|
*
|
* @return 0 if execution was successful
|
* @return 0 if execution was successful
|
**************************************************************************/
|
**************************************************************************/
|
int main() {
|
int main() {
|
|
|
// init UART (primary UART = UART0; if no id number is specified the primary UART is used) at default baud rate, no parity bits, ho hw flow control
|
// init UART (primary UART = UART0; if no id number is specified the primary UART is used) at default baud rate, no parity bits, ho hw flow control
|
neorv32_uart0_setup(BAUD_RATE, PARITY_NONE, FLOW_CONTROL_NONE);
|
neorv32_uart0_setup(BAUD_RATE, PARITY_NONE, FLOW_CONTROL_NONE);
|
|
|
// check if GPIO unit is implemented at all
|
// check if GPIO unit is implemented at all
|
if (neorv32_gpio_available() == 0) {
|
if (neorv32_gpio_available() == 0) {
|
neorv32_uart0_print("Error! No GPIO unit synthesized!\n");
|
neorv32_uart0_print("Error! No GPIO unit synthesized!\n");
|
return 1; // nope, no GPIO unit synthesized
|
return 1; // nope, no GPIO unit synthesized
|
}
|
}
|
|
|
// capture all exceptions and give debug info via UART
|
// capture all exceptions and give debug info via UART
|
// this is not required, but keeps us safe
|
// this is not required, but keeps us safe
|
neorv32_rte_setup();
|
neorv32_rte_setup();
|
|
|
// say hello
|
// say hello
|
neorv32_uart0_print("Blinking LED demo program\n");
|
neorv32_uart0_print("Blinking LED demo program\n");
|
|
|
|
|
// use ASM version of LED blinking (file: blink_led_in_asm.S)
|
// use ASM version of LED blinking (file: blink_led_in_asm.S)
|
#ifdef USE_ASM_VERSION
|
#ifdef USE_ASM_VERSION
|
|
|
blink_led_asm((uint32_t)(&GPIO_OUTPUT));
|
blink_led_asm((uint32_t)(&NEORV32_GPIO.OUTPUT_LO));
|
|
|
// use C version of LED blinking
|
// use C version of LED blinking
|
#else
|
#else
|
|
|
blink_led_c();
|
blink_led_c();
|
|
|
#endif
|
#endif
|
return 0;
|
return 0;
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* C-version of blinky LED counter
|
* C-version of blinky LED counter
|
**************************************************************************/
|
**************************************************************************/
|
void blink_led_c(void) {
|
void blink_led_c(void) {
|
|
|
neorv32_gpio_port_set(0); // clear gpio output
|
neorv32_gpio_port_set(0); // clear gpio output
|
|
|
int cnt = 0;
|
int cnt = 0;
|
|
|
while (1) {
|
while (1) {
|
neorv32_gpio_port_set(cnt++ & 0xFF); // increment counter and mask for lowest 8 bit
|
neorv32_gpio_port_set(cnt++ & 0xFF); // increment counter and mask for lowest 8 bit
|
neorv32_cpu_delay_ms(200); // wait 200ms using busy wait
|
neorv32_cpu_delay_ms(200); // wait 200ms using busy wait
|
}
|
}
|
}
|
}
|
|
|