// #################################################################################################
|
// #################################################################################################
|
// # << NEORV32: neorv32_gpio.c - General Purpose Input/Output Port HW Driver (Source) >> #
|
// # << NEORV32: neorv32_gpio.c - General Purpose Input/Output Port HW Driver (Source) >> #
|
// # ********************************************************************************************* #
|
// # ********************************************************************************************* #
|
// # BSD 3-Clause License #
|
// # BSD 3-Clause License #
|
// # #
|
// # #
|
// # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
|
// # Copyright (c) 2021, Stephan Nolting. All rights reserved. #
|
// # #
|
// # #
|
// # Redistribution and use in source and binary forms, with or without modification, are #
|
// # Redistribution and use in source and binary forms, with or without modification, are #
|
// # permitted provided that the following conditions are met: #
|
// # permitted provided that the following conditions are met: #
|
// # #
|
// # #
|
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
// # conditions and the following disclaimer. #
|
// # conditions and the following disclaimer. #
|
// # #
|
// # #
|
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
// # conditions and the following disclaimer in the documentation and/or other materials #
|
// # conditions and the following disclaimer in the documentation and/or other materials #
|
// # provided with the distribution. #
|
// # provided with the distribution. #
|
// # #
|
// # #
|
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
// # endorse or promote products derived from this software without specific prior written #
|
// # endorse or promote products derived from this software without specific prior written #
|
// # permission. #
|
// # permission. #
|
// # #
|
// # #
|
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
// # ********************************************************************************************* #
|
// # ********************************************************************************************* #
|
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
// #################################################################################################
|
// #################################################################################################
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* @file neorv32_gpio.c
|
* @file neorv32_gpio.c
|
* @author Stephan Nolting
|
* @author Stephan Nolting
|
* @brief General purpose input/output port unit (GPIO) HW driver source file.
|
* @brief General purpose input/output port unit (GPIO) HW driver source file.
|
*
|
*
|
* @note These functions should only be used if the GPIO unit was synthesized (IO_GPIO_EN = true).
|
* @note These functions should only be used if the GPIO unit was synthesized (IO_GPIO_EN = true).
|
**************************************************************************/
|
**************************************************************************/
|
|
|
#include "neorv32.h"
|
#include "neorv32.h"
|
#include "neorv32_gpio.h"
|
#include "neorv32_gpio.h"
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Check if GPIO unit was synthesized.
|
* Check if GPIO unit was synthesized.
|
*
|
*
|
* @return 0 if GPIO was not synthesized, 1 if GPIO is available.
|
* @return 0 if GPIO was not synthesized, 1 if GPIO is available.
|
**************************************************************************/
|
**************************************************************************/
|
int neorv32_gpio_available(void) {
|
int neorv32_gpio_available(void) {
|
|
|
if (SYSINFO_FEATURES & (1 << SYSINFO_FEATURES_IO_GPIO)) {
|
if (SYSINFO_FEATURES & (1 << SYSINFO_FEATURES_IO_GPIO)) {
|
return 1;
|
return 1;
|
}
|
}
|
else {
|
else {
|
return 0;
|
return 0;
|
}
|
}
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Set single pin of GPIO's output port.
|
* Set single pin of GPIO's output port.
|
*
|
*
|
* @param[in] pin Output pin number to be set (0..31).
|
* @param[in] pin Output pin number to be set (0..63).
|
**************************************************************************/
|
**************************************************************************/
|
void neorv32_gpio_pin_set(uint8_t pin) {
|
void neorv32_gpio_pin_set(int pin) {
|
|
|
pin &= 0x1f;
|
uint32_t mask = (uint32_t)(1 << (pin & 0x1f));
|
GPIO_OUTPUT = GPIO_OUTPUT | (uint32_t)(1 << pin);
|
|
|
if (pin < 32) {
|
|
GPIO_OUTPUT_LO |= mask;
|
|
}
|
|
else {
|
|
GPIO_OUTPUT_HI |= mask;
|
|
}
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Clear single pin of GPIO's output port.
|
* Clear single pin of GPIO's output port.
|
*
|
*
|
* @param[in] pin Output pin number to be cleared (0..31).
|
* @param[in] pin Output pin number to be cleared (0..63).
|
**************************************************************************/
|
**************************************************************************/
|
void neorv32_gpio_pin_clr(uint8_t pin) {
|
void neorv32_gpio_pin_clr(int pin) {
|
|
|
pin &= 0x1f;
|
uint32_t mask = (uint32_t)(1 << (pin & 0x1f));
|
GPIO_OUTPUT = GPIO_OUTPUT & ~((uint32_t)(1 << pin));
|
|
|
if (pin < 32) {
|
|
GPIO_OUTPUT_LO &= ~mask;
|
|
}
|
|
else {
|
|
GPIO_OUTPUT_HI &= ~mask;
|
|
}
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Toggle single pin of GPIO's output port.
|
* Toggle single pin of GPIO's output port.
|
*
|
*
|
* @param[in] pin Output pin number to be toggled (0..31).
|
* @param[in] pin Output pin number to be toggled (0..63).
|
**************************************************************************/
|
**************************************************************************/
|
void neorv32_gpio_pin_toggle(uint8_t pin) {
|
void neorv32_gpio_pin_toggle(int pin) {
|
|
|
|
uint32_t mask = (uint32_t)(1 << (pin & 0x1f));
|
|
|
pin &= 0x1f;
|
if (pin < 32) {
|
GPIO_OUTPUT = GPIO_OUTPUT ^ (uint32_t)(1 << pin);
|
GPIO_OUTPUT_LO ^= mask;
|
|
}
|
|
else {
|
|
GPIO_OUTPUT_HI ^= mask;
|
|
}
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Get single pin of GPIO's input port.
|
* Get single pin of GPIO's input port.
|
*
|
*
|
* @param[in] pin Input pin to be read (0..31).
|
* @param[in] pin Input pin to be read (0..63).
|
* @return uint32_t: =0 if pin is low, !=0 if pin is high.
|
* @return =0 if pin is low, !=0 if pin is high.
|
**************************************************************************/
|
**************************************************************************/
|
uint32_t neorv32_gpio_pin_get(uint8_t pin) {
|
uint32_t neorv32_gpio_pin_get(int pin) {
|
|
|
|
uint32_t mask = (uint32_t)(1 << (pin & 0x1f));
|
|
|
pin &= 0x1f;
|
if (pin < 32) {
|
return GPIO_INPUT & (uint32_t)(1 << pin);
|
return GPIO_INPUT_LO & mask;
|
|
}
|
|
else {
|
|
return GPIO_INPUT_HI & mask;
|
|
}
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Set complete GPIO output port.
|
* Set complete GPIO output port.
|
*
|
*
|
* @param[in] port_data New output port value (32-bit).
|
* @param[in] port_data New output port value (64-bit).
|
**************************************************************************/
|
**************************************************************************/
|
void neorv32_gpio_port_set(uint32_t port_data) {
|
void neorv32_gpio_port_set(uint64_t port_data) {
|
|
|
GPIO_OUTPUT = port_data;
|
GPIO_OUTPUT = port_data;
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
/**********************************************************************//**
|
* Get complete GPIO input port.
|
* Get complete GPIO input port.
|
*
|
*
|
* @return Current input port state (32-bit).
|
* @return Current input port state (64-bit).
|
**************************************************************************/
|
**************************************************************************/
|
uint32_t neorv32_gpio_port_get(void) {
|
uint64_t neorv32_gpio_port_get(void) {
|
|
|
return GPIO_INPUT;
|
return GPIO_INPUT;
|
}
|
}
|
|
|
|
|
/**********************************************************************//**
|
|
* Configure pin-change IRQ mask for input pins.
|
|
*
|
|
* @note The pin-change IRQ will trigger on any transition (rising and falling edge) for any enabled input pin.
|
|
*
|
|
* @param[in] pin_sel Mask to select which input pins can cause a pin-change IRQ (32-bit), 1 = pin enabled.
|
|
**************************************************************************/
|
|
void neorv32_gpio_pin_change_config(uint32_t pin_sel) {
|
|
|
|
GPIO_INPUT = pin_sel;
|
|
}
|
|
|
|
|
|