-- Copyright (c)2006, 2016, 2019, 2020 Jeremy Seth Henry
|
-- Copyright (c)2006, 2016, 2019, 2020 Jeremy Seth Henry
|
-- All rights reserved.
|
-- All rights reserved.
|
--
|
--
|
-- Redistribution and use in source and binary forms, with or without
|
-- Redistribution and use in source and binary forms, with or without
|
-- modification, are permitted provided that the following conditions are met:
|
-- modification, are permitted provided that the following conditions are met:
|
-- * Redistributions of source code must retain the above copyright
|
-- * Redistributions of source code must retain the above copyright
|
-- notice, this list of conditions and the following disclaimer.
|
-- notice, this list of conditions and the following disclaimer.
|
-- * Redistributions in binary form must reproduce the above copyright
|
-- * Redistributions in binary form must reproduce the above copyright
|
-- notice, this list of conditions and the following disclaimer in the
|
-- notice, this list of conditions and the following disclaimer in the
|
-- documentation and/or other materials provided with the distribution,
|
-- documentation and/or other materials provided with the distribution,
|
-- where applicable (as part of a user interface, debugging port, etc.)
|
-- where applicable (as part of a user interface, debugging port, etc.)
|
--
|
--
|
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
|
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
|
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
|
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
|
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
--
|
--
|
-- VHDL Units : o8_sys_timer
|
-- VHDL Units : o8_sys_timer
|
-- Description: Provides an 8-bit microsecond resolution timer for generating
|
-- Description: Provides an 8-bit microsecond resolution timer for generating
|
-- : periodic interrupts for the Open8 CPU.
|
-- : periodic interrupts for the Open8 CPU.
|
--
|
--
|
-- Notes : It is possible to set the value to zero, resulting in the
|
-- Notes : Setting the output to 0x00 will disable the timer
|
-- : output staying high indefinitely. This may cause an issue if
|
|
-- : the output is connected to an interrupt input.
|
|
-- : Also provides uSec_Tick as an output
|
|
--
|
--
|
-- Revision History
|
-- Revision History
|
-- Author Date Change
|
-- Author Date Change
|
------------------ -------- ---------------------------------------------------
|
------------------ -------- ---------------------------------------------------
|
-- Seth Henry 07/28/11 Design Start
|
-- Seth Henry 07/28/11 Design Start
|
-- Seth Henry 12/19/19 Renamed Tmr_Out to Interrupt
|
-- Seth Henry 12/19/19 Renamed Tmr_Out to Interrupt
|
-- Seth Henry 04/09/20 Modified timer update logic to reset the timer on
|
-- Seth Henry 04/09/20 Modified timer update logic to reset the timer on
|
-- interval write.
|
-- interval write.
|
-- Seth Henry 04/16/20 Modified to use Open8 bus record
|
-- Seth Henry 04/16/20 Modified to use Open8 bus record
|
|
|
library ieee;
|
library ieee;
|
use ieee.std_logic_1164.all;
|
use ieee.std_logic_1164.all;
|
use ieee.std_logic_unsigned.all;
|
use ieee.std_logic_unsigned.all;
|
use ieee.std_logic_arith.all;
|
use ieee.std_logic_arith.all;
|
use ieee.std_logic_misc.all;
|
use ieee.std_logic_misc.all;
|
|
|
library work;
|
library work;
|
use work.open8_pkg.all;
|
use work.open8_pkg.all;
|
|
|
entity o8_sys_timer is
|
entity o8_sys_timer is
|
generic(
|
generic(
|
Address : ADDRESS_TYPE
|
Address : ADDRESS_TYPE
|
);
|
);
|
port(
|
port(
|
Open8_Bus : in OPEN8_BUS_TYPE;
|
Open8_Bus : in OPEN8_BUS_TYPE;
|
Rd_Data : out DATA_TYPE;
|
Rd_Data : out DATA_TYPE;
|
Interrupt : out std_logic
|
Interrupt : out std_logic
|
);
|
);
|
end entity;
|
end entity;
|
|
|
architecture behave of o8_sys_timer is
|
architecture behave of o8_sys_timer is
|
|
|
alias Clock is Open8_Bus.Clock;
|
alias Clock is Open8_Bus.Clock;
|
alias Reset is Open8_Bus.Reset;
|
alias Reset is Open8_Bus.Reset;
|
alias uSec_Tick is Open8_Bus.uSec_Tick;
|
alias uSec_Tick is Open8_Bus.uSec_Tick;
|
|
|
constant User_Addr : ADDRESS_TYPE := Address;
|
constant User_Addr : ADDRESS_TYPE := Address;
|
alias Comp_Addr is Open8_Bus.Address(15 downto 0);
|
alias Comp_Addr is Open8_Bus.Address(15 downto 0);
|
signal Addr_Match : std_logic := '0';
|
signal Addr_Match : std_logic := '0';
|
signal Wr_En : std_logic := '0';
|
signal Wr_En : std_logic := '0';
|
signal Wr_Data_q : DATA_TYPE := x"00";
|
signal Wr_Data_q : DATA_TYPE := x"00";
|
signal Rd_En : std_logic := '0';
|
signal Rd_En : std_logic := '0';
|
signal Rd_En_q : std_logic := '0';
|
signal Rd_En_q : std_logic := '0';
|
|
|
signal Interval : DATA_TYPE := x"00";
|
signal Interval : DATA_TYPE := x"00";
|
signal Update_Interval : std_logic;
|
signal Update_Interval : std_logic;
|
signal Timer_Cnt : DATA_TYPE := x"00";
|
signal Timer_Cnt : DATA_TYPE := x"00";
|
|
|
begin
|
begin
|
|
|
Addr_Match <= '1' when Comp_Addr = User_Addr else '0';
|
Addr_Match <= '1' when Comp_Addr = User_Addr else '0';
|
|
|
io_reg: process( Clock, Reset )
|
io_reg: process( Clock, Reset )
|
begin
|
begin
|
if( Reset = Reset_Level )then
|
if( Reset = Reset_Level )then
|
Wr_En <= '0';
|
Wr_En <= '0';
|
Wr_Data_q <= x"00";
|
Wr_Data_q <= x"00";
|
Rd_En <= '0';
|
Rd_En <= '0';
|
Rd_Data <= OPEN8_NULLBUS;
|
Rd_Data <= OPEN8_NULLBUS;
|
Interval <= x"00";
|
Interval <= x"00";
|
Update_Interval <= '0';
|
Update_Interval <= '0';
|
elsif( rising_edge( Clock ) )then
|
elsif( rising_edge( Clock ) )then
|
Wr_En <= Addr_Match and Open8_Bus.Wr_En;
|
Wr_En <= Addr_Match and Open8_Bus.Wr_En;
|
Wr_Data_q <= Open8_Bus.Wr_Data;
|
Wr_Data_q <= Open8_Bus.Wr_Data;
|
Update_Interval <= '0';
|
Update_Interval <= '0';
|
if( Wr_En = '1' )then
|
if( Wr_En = '1' )then
|
Interval <= Wr_Data_q;
|
Interval <= Wr_Data_q;
|
Update_Interval <= '1';
|
Update_Interval <= '1';
|
end if;
|
end if;
|
|
|
Rd_Data <= (others => '0');
|
Rd_Data <= OPEN8_NULLBUS;
|
Rd_En <= Addr_Match and Open8_Bus.Rd_En;
|
Rd_En <= Addr_Match and Open8_Bus.Rd_En;
|
if( Rd_En = '1' )then
|
if( Rd_En = '1' )then
|
Rd_Data <= Interval;
|
Rd_Data <= Interval;
|
end if;
|
end if;
|
end if;
|
end if;
|
end process;
|
end process;
|
|
|
Interval_proc: process( Clock, Reset )
|
Interval_proc: process( Clock, Reset )
|
begin
|
begin
|
if( Reset = Reset_Level )then
|
if( Reset = Reset_Level )then
|
Timer_Cnt <= x"00";
|
Timer_Cnt <= x"00";
|
Interrupt <= '0';
|
Interrupt <= '0';
|
elsif( rising_edge(Clock) )then
|
elsif( rising_edge(Clock) )then
|
Interrupt <= '0';
|
Interrupt <= '0';
|
Timer_Cnt <= Timer_Cnt - uSec_Tick;
|
Timer_Cnt <= Timer_Cnt - uSec_Tick;
|
if( Update_Interval = '1' )then
|
if( Update_Interval = '1' )then
|
Timer_Cnt <= Interval;
|
Timer_Cnt <= Interval;
|
elsif( or_reduce(Timer_Cnt) = '0' )then
|
elsif( or_reduce(Timer_Cnt) = '0' )then
|
Timer_Cnt <= Interval;
|
Timer_Cnt <= Interval;
|
Interrupt <= or_reduce(Interval); -- Only trigger on Int > 0
|
Interrupt <= or_reduce(Interval); -- Only trigger on Int > 0
|
end if;
|
end if;
|
end if;
|
end if;
|
end process;
|
end process;
|
|
|
end architecture;
|
end architecture;
|
|
|