Subversion Repositories open8_urisc

-*- text -*-

-*- text -*-

* Add support for the Renesas RL78 architecture.

* Add support for the Renesas RL78 architecture.

Changes in 2.22:

Changes in 2.22:

* Add support for displaying the contents of .debug.macro sections.

* Add support for displaying the contents of .debug.macro sections.

* Add --preprocessor-arg option to windres to specify additional options

* Add --preprocessor-arg option to windres to specify additional options

  passed to preprocessor.

  passed to preprocessor.

* Add --dwarf-start and --dwarf-end to readelf and objdump.  These are used by

* Add --dwarf-start and --dwarf-end to readelf and objdump.  These are used by

  the new Emacs mode, see dwarf-mode.el.

  the new Emacs mode, see dwarf-mode.el.

* Add support for the Tilera TILEPro and TILE-Gx architectures.

* Add support for the Tilera TILEPro and TILE-Gx architectures.

changes in 2.21:

changes in 2.21:

* Add --interleave-width option to objcopy to allowing copying a range of

* Add --interleave-width option to objcopy to allowing copying a range of

  bytes from the input to the output with the --interleave option.

  bytes from the input to the output with the --interleave option.

* Add support for the TMS320C6000 (TI C6X) processor family.

* Add support for the TMS320C6000 (TI C6X) processor family.

* Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab) using

* Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab) using

  the -u / --unwind option.

  the -u / --unwind option.

* Add --dyn-syms to readelf to dump dynamic symbol table.

* Add --dyn-syms to readelf to dump dynamic symbol table.

* A new tool - elfedit - has been added to directly manipulate ELF format

* A new tool - elfedit - has been added to directly manipulate ELF format

  binaries.

  binaries.

* Add to dlltool .def file feature of aliasing PE internal symbol name by

* Add to dlltool .def file feature of aliasing PE internal symbol name by

  '== ' option.

  '== ' option.

* Add a new command line option -a / --addresses to addr2line to display the

* Add a new command line option -a / --addresses to addr2line to display the

  address before function name or source filename.

  address before function name or source filename.

* Add a new command line option -p / --pretty-print to addr2line to have

* Add a new command line option -p / --pretty-print to addr2line to have

  a more human readable output.

  a more human readable output.

* The hppa/som targets can now be compiled on any host.

* The hppa/som targets can now be compiled on any host.

Changes in 2.20:

Changes in 2.20:

* Add support for delay importing to dlltool.  Use the --output-delaylib 

* Add support for delay importing to dlltool.  Use the --output-delaylib 

  switch to create a delay-import library.  The resulting app will load the dll

  switch to create a delay-import library.  The resulting app will load the dll

  as soon as the first function is called.  It will link to __delayLoadHelper2()

  as soon as the first function is called.  It will link to __delayLoadHelper2()

  from the static delayimp library, which will import LoadLibraryA and

  from the static delayimp library, which will import LoadLibraryA and

  GetProcAddress from kernel32.

  GetProcAddress from kernel32.

* Add a new command line option, --insn-width=WIDTH, to objdump to specify

* Add a new command line option, --insn-width=WIDTH, to objdump to specify

  number of bytes to be displayed on a single line when disassembling

  number of bytes to be displayed on a single line when disassembling

  instructions.

  instructions.

* Readelf can now display the relocated contents of a section as a sequence

* Readelf can now display the relocated contents of a section as a sequence

  of bytes via the --relocated-dump= command line option.

  of bytes via the --relocated-dump= command line option.

* The gprof program has been given a new command line option:

* The gprof program has been given a new command line option:

  --external-symbols-table= which reads in symbols from a specified

  --external-symbols-table= which reads in symbols from a specified

  file.

  file.

* The plugin target has been added to bfd. It can load the same shared objects

* The plugin target has been added to bfd. It can load the same shared objects

  used by gold and uses them to provide basic support for new file formats.

  used by gold and uses them to provide basic support for new file formats.

* The verilog memory hex dump file format is now supported as an output format

* The verilog memory hex dump file format is now supported as an output format

  for objcopy.

  for objcopy.

* Add --file-alignment, --heap, --image-base, --section-alignment,

* Add --file-alignment, --heap, --image-base, --section-alignment,

  --stack and --subsystem command line options to objcopy, which will

  --stack and --subsystem command line options to objcopy, which will

  set PE optional header.

  set PE optional header.

* Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w.

* Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w.

* --as-needed now links in a dynamic library if it satisfies undefined

* --as-needed now links in a dynamic library if it satisfies undefined

  symbols in regular objects, or in other dynamic libraries.  In the

  symbols in regular objects, or in other dynamic libraries.  In the

  latter case the library is not linked if it is found in a DT_NEEDED

  latter case the library is not linked if it is found in a DT_NEEDED

  entry of one of the libraries already linked.

  entry of one of the libraries already linked.

* Added --prefix=PREFIX and --prefix-strip=LEVEL switches to objdump to

* Added --prefix=PREFIX and --prefix-strip=LEVEL switches to objdump to

  add absolute paths for -S.

  add absolute paths for -S.

* Add new option --use-nul-prefixed-import-tables to dlltool to allow fall-

* Add new option --use-nul-prefixed-import-tables to dlltool to allow fall-

  back to old import table generation with null element prefix.

  back to old import table generation with null element prefix.

* Added --identify-strict switch to cause --identify  to

* Added --identify-strict switch to cause --identify  to

  report an error when the import library is associated with

  report an error when the import library is associated with

  multiple DLLs.

  multiple DLLs.

* Added --identify  option to dlltool, which determines the

* Added --identify  option to dlltool, which determines the

  name of the DLL associated with the specified .

  name of the DLL associated with the specified .

* Support for PowerPC booke64 instructions has been removed.  The assembler no

* Support for PowerPC booke64 instructions has been removed.  The assembler no

  longer accepts -mbooke32 or -mbooke64 and the disassembler no longer accepts

  longer accepts -mbooke32 or -mbooke64 and the disassembler no longer accepts

  -Mbooke32 or -Mbooke64.  Instead, -mbooke and -Mbooke should be used.

  -Mbooke32 or -Mbooke64.  Instead, -mbooke and -Mbooke should be used.

Changes in 2.19:

Changes in 2.19:

* Added -wL switch to dump decoded contents of .debug_line.

* Added -wL switch to dump decoded contents of .debug_line.

* Added support for "thin" archives which contain pathnames pointing to

* Added support for "thin" archives which contain pathnames pointing to

  object files rather than the files themselves and which contain a

  object files rather than the files themselves and which contain a

  flattened symbol index for all objects, and archives, which have been

  flattened symbol index for all objects, and archives, which have been

  added to the archive.

  added to the archive.

* Added -F switch to objdump to include file offsets in the disassembly.

* Added -F switch to objdump to include file offsets in the disassembly.

* Added -c switch to readelf to allow string dumps of archive symbol index.

* Added -c switch to readelf to allow string dumps of archive symbol index.

* Support for SSE5 has been added to the i386 port.

* Support for SSE5 has been added to the i386 port.

* Added -p switch to readelf to allow string dumps of sections.

* Added -p switch to readelf to allow string dumps of sections.

Changes in 2.18:

Changes in 2.18:

* Resolved 37 coding problems in bfd including static array overruns, null

* Resolved 37 coding problems in bfd including static array overruns, null

  pointer dereferences and use of a malloc buffer after it has been freed, as

  pointer dereferences and use of a malloc buffer after it has been freed, as

  revealed by static analysis donated by Coverity, Inc. (http://scan.coverity.com).

  revealed by static analysis donated by Coverity, Inc. (http://scan.coverity.com).

* The binutils sources are now released under version 3 of the GNU General

* The binutils sources are now released under version 3 of the GNU General

  Public License.

  Public License.

* A new tool "windmc" has been added for some targets.  This is a message

* A new tool "windmc" has been added for some targets.  This is a message

  compiler which attempts to be compatible with the MS version.

  compiler which attempts to be compatible with the MS version.

* Add codepage support to the windres tool.  It now supports many new

* Add codepage support to the windres tool.  It now supports many new

  resource types (e.g. MANIFEST, TOOLBAR, etc).  The output generation

  resource types (e.g. MANIFEST, TOOLBAR, etc).  The output generation

  for binary files is done now via bfd itself.  The endianess problems

  for binary files is done now via bfd itself.  The endianess problems

  for different hosts are solved.  Dumps of .res files can now be

  for different hosts are solved.  Dumps of .res files can now be

  re-compiled by windres without lossing resources or compilation errors.

  re-compiled by windres without lossing resources or compilation errors.

  Some problems on dialog resource translations are corrected.

  Some problems on dialog resource translations are corrected.

* Add --extract-symbol command line option to objcopy, which will

* Add --extract-symbol command line option to objcopy, which will

  strip everything out of an ordinary object file or executable except

  strip everything out of an ordinary object file or executable except

  for its symbol table.  Files containing just symbols can be useful

  for its symbol table.  Files containing just symbols can be useful

  to some OSes.

  to some OSes.

Changes in 2.17:

Changes in 2.17:

* Add "-x NAME" to readelf in addition to "-x NUMBER".

* Add "-x NAME" to readelf in addition to "-x NUMBER".

* Add -i and -t switches to cxxfilt.  -i disables the display of implementation

* Add -i and -t switches to cxxfilt.  -i disables the display of implementation

  specific extra demangling information (if any) and -t disables the demangling

  specific extra demangling information (if any) and -t disables the demangling

  of types.

  of types.

* Add support for the "@" syntax to the command lines of all tools, so

* Add support for the "@" syntax to the command lines of all tools, so

  that extra switches can be read from .

  that extra switches can be read from .

* Add "-W/--dwarf" to objdump to display the contents of the DWARF

* Add "-W/--dwarf" to objdump to display the contents of the DWARF

  debug sections.

  debug sections.

* Add "-t/--section-details" to readelf to display section details.

* Add "-t/--section-details" to readelf to display section details.

  "-N/--full-section-name" is deprecated.

  "-N/--full-section-name" is deprecated.

* powerpc-linux ld now supports a variant form of PLT and GOT for the security

* powerpc-linux ld now supports a variant form of PLT and GOT for the security

  conscious.  This form will automatically be chosen when ld detects that all

  conscious.  This form will automatically be chosen when ld detects that all

  code in regular object files was generated by gcc -msecure-plt.  The old PLT

  code in regular object files was generated by gcc -msecure-plt.  The old PLT

  and GOT may be forced by a new ld option, --bss-plt.

  and GOT may be forced by a new ld option, --bss-plt.

* Add "-i/--inlines" to addr2line to print enclosing scope information

* Add "-i/--inlines" to addr2line to print enclosing scope information

  for inlined function chains, back to first non-inlined function.

  for inlined function chains, back to first non-inlined function.

* Add "-N/--full-section-name" to readelf to display full section name.

* Add "-N/--full-section-name" to readelf to display full section name.

* Add "-M entry:" switch to objdump to specify a function entry address

* Add "-M entry:" switch to objdump to specify a function entry address

  when disassembling VAX binaries.

  when disassembling VAX binaries.

* Add "--globalize-symbol " and "--globalize-symbols " switches

* Add "--globalize-symbol " and "--globalize-symbols " switches

  to objcopy to convert local symbols into global symbols.

  to objcopy to convert local symbols into global symbols.

* gprof now allows input files to have histogram records for

* gprof now allows input files to have histogram records for

  several memory ranges, provided those ranges are disjoint.

  several memory ranges, provided those ranges are disjoint.

Changes in 2.16:

Changes in 2.16:

* Add "-g/--section-groups" to readelf to display section groups.

* Add "-g/--section-groups" to readelf to display section groups.

* objcopy recognizes two new options --strip-unneeded-symbol and

* objcopy recognizes two new options --strip-unneeded-symbol and

  --strip-unneeded-symbols, namely for use together with the wildcard

  --strip-unneeded-symbols, namely for use together with the wildcard

  matching the original --strip-symbol/--strip-symbols provided, but

  matching the original --strip-symbol/--strip-symbols provided, but

  retaining any symbols matching but needed by relocations.

  retaining any symbols matching but needed by relocations.

* readelf can now display address ranges from .debug_range sections.  This

* readelf can now display address ranges from .debug_range sections.  This

  happens automatically when a DW_AT_range attribute is encountered.  The

  happens automatically when a DW_AT_range attribute is encountered.  The

  command line switch --debug-dump=Ranges (or -wR) can also be used to display

  command line switch --debug-dump=Ranges (or -wR) can also be used to display

  the contents of the .debug_range section.

  the contents of the .debug_range section.

* nm and objdump now have a switch "--special-syms" to enable the displaying of

* nm and objdump now have a switch "--special-syms" to enable the displaying of

  symbols which the target considers to be special.  By default these symbols

  symbols which the target considers to be special.  By default these symbols

  are no longer displayed.  Currently the only special symbols are the Mapping

  are no longer displayed.  Currently the only special symbols are the Mapping

  symbols used by the ARM port to mark transitions between text and data and

  symbols used by the ARM port to mark transitions between text and data and

  between ARM and THUMB code.

  between ARM and THUMB code.

* dlltool has a switch "--ext-prefix-alias " to generate additional

* dlltool has a switch "--ext-prefix-alias " to generate additional

  import and export symbols with  prepended to them.

  import and export symbols with  prepended to them.

Changes in 2.15:

Changes in 2.15:

* objcopy for MIPS targets now accepts "-M no-aliases" as an option to the

* objcopy for MIPS targets now accepts "-M no-aliases" as an option to the

  disassembler to print the "raw" mips instruction mnemonic instead of some

  disassembler to print the "raw" mips instruction mnemonic instead of some

  pseudo instruction name.  I.E. print "daddu" or "or" instead of "move",

  pseudo instruction name.  I.E. print "daddu" or "or" instead of "move",

  "sll" instead of "nop", etc.

  "sll" instead of "nop", etc.

* objcopy and strip can now take wildcard patterns in symbol names specified on

* objcopy and strip can now take wildcard patterns in symbol names specified on

  the command line provided that the --wildcard switch is used to enable them.

  the command line provided that the --wildcard switch is used to enable them.

* readelf can now parse archives.

* readelf can now parse archives.

* objdump now accepts --debugging-tags to print the debug information in a

* objdump now accepts --debugging-tags to print the debug information in a

  format compatible with ctags tool.

  format compatible with ctags tool.

* objcopy and strip now accept --only-keep-debug to create a file containing

* objcopy and strip now accept --only-keep-debug to create a file containing

  those sections that would be stripped out by --strip-debug.  The idea is that

  those sections that would be stripped out by --strip-debug.  The idea is that

  this can be used in conjunction with the --add-gnu-debuglink switch to create

  this can be used in conjunction with the --add-gnu-debuglink switch to create

  a two part program distribution - one a stripped executable and the other the

  a two part program distribution - one a stripped executable and the other the

  debugging info.

  debugging info.

* objcopy now accepts --add-gnu-debuglink= to insert a .gnu_debuglink

* objcopy now accepts --add-gnu-debuglink= to insert a .gnu_debuglink

  section into a (presumably stripped) executable.  This allows the debug

  section into a (presumably stripped) executable.  This allows the debug

  information for the file to be held in a separate file.

  information for the file to be held in a separate file.

* BFD marks the sections .comment and .note as 'n' in the BSD/POSIX

* BFD marks the sections .comment and .note as 'n' in the BSD/POSIX

  single-character representation.  This can be checked by running nm

  single-character representation.  This can be checked by running nm

  with the -a switch.

  with the -a switch.

Changes in 2.14:

Changes in 2.14:

* Added --info switch to objcopy and strip.

* Added --info switch to objcopy and strip.

* Support for Vitesse IQ2000 added by Red Hat.

* Support for Vitesse IQ2000 added by Red Hat.

* Added 'S' encoding to strings to allow the display of 8-bit characters.

* Added 'S' encoding to strings to allow the display of 8-bit characters.

* Added --prefix-symbols=, --prefix-sections= and

* Added --prefix-symbols=, --prefix-sections= and

  --prefix-alloc-sections= to objcopy.

  --prefix-alloc-sections= to objcopy.

* readelf can handle the extensions to the DWARF2 spec used by the Unified

* readelf can handle the extensions to the DWARF2 spec used by the Unified

  Parallel C compiler.

  Parallel C compiler.

* BFD no longer declares a "boolean" type, to avoid clashes with other

* BFD no longer declares a "boolean" type, to avoid clashes with other

  headers that declare the same.  Users of BFD should replace boolean,

  headers that declare the same.  Users of BFD should replace boolean,

  false and true, with int, 0 and 1, or define their own boolean type.

  false and true, with int, 0 and 1, or define their own boolean type.

* Support for IP2K added by Denis Chertykov.

* Support for IP2K added by Denis Chertykov.

Changes in 2.13:

Changes in 2.13:

* Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400

* Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400

  and FR500 included.

  and FR500 included.

Changes in version 2.12:

Changes in version 2.12:

* Support for Don Knuth's MMIX, by Hans-Peter Nilsson.

* Support for Don Knuth's MMIX, by Hans-Peter Nilsson.

* size: Add --totals to display summary of sizes (Berkeley format only).

* size: Add --totals to display summary of sizes (Berkeley format only).

* readelf: Add --wide option to not break section header or segment listing

* readelf: Add --wide option to not break section header or segment listing

  lines to fit into 80 columns.

  lines to fit into 80 columns.

* strings: Add --encoding to display wide character strings.  By Markus Kuhn.

* strings: Add --encoding to display wide character strings.  By Markus Kuhn.

* objcopy: Add --rename-section to change section names.

* objcopy: Add --rename-section to change section names.

* readelf: Support added for DWARF 2.1 extensions.  Support added for

* readelf: Support added for DWARF 2.1 extensions.  Support added for

  displaying the contents of .debug.macinfo sections.

  displaying the contents of .debug.macinfo sections.

* New command line switches added to objcopy to allow symbols to be kept as

* New command line switches added to objcopy to allow symbols to be kept as

  global symbols, and also to specify files containing lists of such symbols.

  global symbols, and also to specify files containing lists of such symbols.

  by Honda Hiroki.

  by Honda Hiroki.

* Support for OpenRISC by Johan Rydberg.

* Support for OpenRISC by Johan Rydberg.

* New command line switch to objcopy --alt-machine-code which creates a binary

* New command line switch to objcopy --alt-machine-code which creates a binary

  with an alternate machine code if one is defined in the architecture

  with an alternate machine code if one is defined in the architecture

  description.  Only supported for ELF targets.  By Alexandre Oliva.

  description.  Only supported for ELF targets.  By Alexandre Oliva.

* New command line switch to objcopy -B (or --binary-architecture) which sets

* New command line switch to objcopy -B (or --binary-architecture) which sets

  the architecture of the output file to the given argument.  This option only

  the architecture of the output file to the given argument.  This option only

  makes sense, if the input target is binary.  Otherwise it is ignored.

  makes sense, if the input target is binary.  Otherwise it is ignored.

  By Stefan Geuken.

  By Stefan Geuken.

* Support for PDP-11 by Lars Brinkhoff.

* Support for PDP-11 by Lars Brinkhoff.

Changes in binutils 2.11:

Changes in binutils 2.11:

* Add support for ARM v5t and v5te architectures and Intel's XScale ARM

* Add support for ARM v5t and v5te architectures and Intel's XScale ARM

  extenstions.

  extenstions.

* Add --srec-len and --srec-forceS3 command line switch to objcopy.

* Add --srec-len and --srec-forceS3 command line switch to objcopy.

  By Luciano Gemme.

  By Luciano Gemme.

* Support for the MIPS32, by Anders Norlander.

* Support for the MIPS32, by Anders Norlander.

* Support for the i860, by Jason Eckhardt.

* Support for the i860, by Jason Eckhardt.

* Support for CRIS (Axis Communications ETRAX series).

* Support for CRIS (Axis Communications ETRAX series).

Changes in binutils 2.10:

Changes in binutils 2.10:

* Support for 64-bit ELF on HPPA.

* Support for 64-bit ELF on HPPA.

* New command line switch to objdump --file-start-context which shows the

* New command line switch to objdump --file-start-context which shows the

  entire file contents up to the source line first encountered for a given

  entire file contents up to the source line first encountered for a given

  file.

  file.

* New command line switch to objdump -M (or --disassembler-options) which takes

* New command line switch to objdump -M (or --disassembler-options) which takes

  a parameter which can then be interpreted on a per-target basis by the

  a parameter which can then be interpreted on a per-target basis by the

  disassembler.  Used by ARM targets to select register name sets, ISA, APCS or

  disassembler.  Used by ARM targets to select register name sets, ISA, APCS or

  raw verions.

  raw verions.

* objdump support for -mi386:intel which causes disassembly to be displayed

* objdump support for -mi386:intel which causes disassembly to be displayed

  with intel syntax.

  with intel syntax.

* New program: readelf.  This displays the contents of ELF format files,

* New program: readelf.  This displays the contents of ELF format files,

  regardless of target machine.

  regardless of target machine.

* objcopy now takes --change-section-lma, --change-section-vma, and

* objcopy now takes --change-section-lma, --change-section-vma, and

  --change-section-address options.  The old --adjust-section-vma option is

  --change-section-address options.  The old --adjust-section-vma option is

  equivalent to --change-section-address.  The other --adjust-* options are now

  equivalent to --change-section-address.  The other --adjust-* options are now

  renamed to --change-*, although --adjust-* continues to work.

  renamed to --change-*, although --adjust-* continues to work.

* objcopy has a --redefine-sym option that lets you rename symbols.

* objcopy has a --redefine-sym option that lets you rename symbols.

* objcopy now takes a -j/--only-section option to copy only the specified

* objcopy now takes a -j/--only-section option to copy only the specified

  sections.

  sections.

* dlltool now supports the IMPORTS command.

* dlltool now supports the IMPORTS command.

* dlltool now takes --export-all-symbols, --no-export-all-symbols,

* dlltool now takes --export-all-symbols, --no-export-all-symbols,

  --exclude-symbols, and --no-default-excludes options.

  --exclude-symbols, and --no-default-excludes options.

Changes in binutils 2.9:

Changes in binutils 2.9:

* Added windres program, which can be used to manipulate resources in WIN32

* Added windres program, which can be used to manipulate resources in WIN32

  files as used on Windows 95 and Windows NT.

  files as used on Windows 95 and Windows NT.

* The objcopy --gap-fill and --pad-to options operate on the LMA rather than

* The objcopy --gap-fill and --pad-to options operate on the LMA rather than

  the VMA of the sections.

  the VMA of the sections.

* Added S modifier to ar to not build a symbol table.

* Added S modifier to ar to not build a symbol table.

Changes in binutils 2.8:

Changes in binutils 2.8:

* The objdump disassembly format has been changed, and hopefully improved.  Use

* The objdump disassembly format has been changed, and hopefully improved.  Use

  the new --prefix-addresses option to get the old format.  There are also new

  the new --prefix-addresses option to get the old format.  There are also new

  --disassemble-zeroes and --no-show-raw-insn options which affect disassembler

  --disassemble-zeroes and --no-show-raw-insn options which affect disassembler

  output.

  output.

* Formats may now be specified as configuration triplets.  For example,

* Formats may now be specified as configuration triplets.  For example,

  objdump -b i386-pc-linux.  The triplets are not passed through config.sub,

  objdump -b i386-pc-linux.  The triplets are not passed through config.sub,

  so they must be in canonical form.

  so they must be in canonical form.

* Added new addr2line program.  This uses the debugging information to convert

* Added new addr2line program.  This uses the debugging information to convert

  an address into a file name and line number within a program.

  an address into a file name and line number within a program.

* Added --change-leading-char argument to objcopy.

* Added --change-leading-char argument to objcopy.

* Added --weaken argument to objcopy.

* Added --weaken argument to objcopy.

* objdump --dynamic-reloc now works on ELF executables and shared libraries.

* objdump --dynamic-reloc now works on ELF executables and shared libraries.

* Added --adjust-vma option to objdump.

* Added --adjust-vma option to objdump.

* Added -C/--demangle option to objdump.

* Added -C/--demangle option to objdump.

* Added -p/--preserve-dates option to strip and objcopy.

* Added -p/--preserve-dates option to strip and objcopy.

Changes in binutils 2.7:

Changes in binutils 2.7:

* Added --enable-shared and --enable-commonbfdlib options to configure.

* Added --enable-shared and --enable-commonbfdlib options to configure.

* Added --debugging argument to objdump and objcopy.

* Added --debugging argument to objdump and objcopy.

* Added --defined-only argument to nm.

* Added --defined-only argument to nm.

* Added --remove-leading-char argument to objcopy.

* Added --remove-leading-char argument to objcopy.

* The objdump --line-numbers option is now meaningful with --reloc.

* The objdump --line-numbers option is now meaningful with --reloc.

* Added --line-numbers option to nm.

* Added --line-numbers option to nm.

* Added --endian/-EB/-EL option to objdump.

* Added --endian/-EB/-EL option to objdump.

* Added support for Alpha OpenVMS/AXP.

* Added support for Alpha OpenVMS/AXP.

Changes in binutils 2.6:

Changes in binutils 2.6:

* Added -N/--strip-symbol and -K/--keep-symbol arguments to strip and objcopy.

* Added -N/--strip-symbol and -K/--keep-symbol arguments to strip and objcopy.

* Added several arguments to objcopy to provide some control over how the new

* Added several arguments to objcopy to provide some control over how the new

  file is laid out in memory.  Also added binary output format to BFD to permit

  file is laid out in memory.  Also added binary output format to BFD to permit

  generating plain binary files.

  generating plain binary files.

* Added --start-address and --stop-address options to objdump.

* Added --start-address and --stop-address options to objdump.

* ar and ranlib now work on AIX.  The tools are now built by default on AIX.

* ar and ranlib now work on AIX.  The tools are now built by default on AIX.

Changes in binutils 2.5:

Changes in binutils 2.5:

* Changed objdump -dr to dump the relocs interspersed with the assembly

* Changed objdump -dr to dump the relocs interspersed with the assembly

  listing, for a more useful listing of relocatable files.

  listing, for a more useful listing of relocatable files.

* Changed objdump -d/--disassemble to only disassemble SEC_CODE sections.

* Changed objdump -d/--disassemble to only disassemble SEC_CODE sections.

  Added -D/--disassemble-all option to disassemble all sections.

  Added -D/--disassemble-all option to disassemble all sections.

* Added --size-sort option to nm.

* Added --size-sort option to nm.

* strip and objcopy should now be able to handle dynamically linked ELF

* strip and objcopy should now be able to handle dynamically linked ELF

  executables.

  executables.

Changes in binutils 2.4:

Changes in binutils 2.4:

* Support for HP-PA (by Jeff Law), i386 Mach (by David Mackenzie), RS/6000 and

* Support for HP-PA (by Jeff Law), i386 Mach (by David Mackenzie), RS/6000 and

  PowerPC (except ar and ranlib; by Ian Taylor).

  PowerPC (except ar and ranlib; by Ian Taylor).

* Support for Irix 5.

* Support for Irix 5.

* Programs `strip' and `objcopy' will not attempt to write dynamically linked

* Programs `strip' and `objcopy' will not attempt to write dynamically linked

  ELF output files, since BFD currently can't create them properly.

  ELF output files, since BFD currently can't create them properly.

Changes in binutils 2.3:

Changes in binutils 2.3:

* A new --stabs argument has been added to objdump to dump stabs sections in

* A new --stabs argument has been added to objdump to dump stabs sections in

  ELF and COFF files.

  ELF and COFF files.

* A new program, nlmconv, has been added.  It can convert object files into

* A new program, nlmconv, has been added.  It can convert object files into

  Novell NetWare Loadable Modules.

  Novell NetWare Loadable Modules.

* The strings program has been added.

* The strings program has been added.

Changes in binutils 2.2:

Changes in binutils 2.2:

* The 'copy' program has been renamed to 'objcopy', for consistency with

* The 'copy' program has been renamed to 'objcopy', for consistency with

  'objdump', and because 'copy' might more plausibly be used as a synonym for

  'objdump', and because 'copy' might more plausibly be used as a synonym for

  'cp'.

  'cp'.

* The new stand-alone program c++filt is a filter that converts encoded

* The new stand-alone program c++filt is a filter that converts encoded

  (mangled) C++ assembly-level identifiers to user-level names.  (Note: This

  (mangled) C++ assembly-level identifiers to user-level names.  (Note: This

  may get moved to the gcc distribution.)

  may get moved to the gcc distribution.)

* nm -o on an archive now prefixes each line with the archive name, matching

* nm -o on an archive now prefixes each line with the archive name, matching

  the output from BSD nm.

  the output from BSD nm.

* ar (and ld) can now read (but not write) BSD4.4-style archives.

* ar (and ld) can now read (but not write) BSD4.4-style archives.

* New support for H8500, Z8000, and the Hitach SH.

* New support for H8500, Z8000, and the Hitach SH.

* Dis-assembler interface changed to allow sharing with gdb.

* Dis-assembler interface changed to allow sharing with gdb.

* There is new Elf code, but it is not yet ready for general use.

* There is new Elf code, but it is not yet ready for general use.

* There is the beginnings of a test suite.

* There is the beginnings of a test suite.

Changes in binutils 2.1:

Changes in binutils 2.1:

* There is now support for writing ECOFF files, so ld and the other utilities

* There is now support for writing ECOFF files, so ld and the other utilities

  should work on Risc/Ultrix and Irix.  Please let us know how well this works.

  should work on Risc/Ultrix and Irix.  Please let us know how well this works.

* ar now automatically creates a symbol table (a __.SYMDEF member, in the BSD

* ar now automatically creates a symbol table (a __.SYMDEF member, in the BSD

  version), if there are any object files in the archive.  So running ranlib is

  version), if there are any object files in the archive.  So running ranlib is

  now redundant (unless the non-standard q command is used).  This is required

  now redundant (unless the non-standard q command is used).  This is required

  for Posix.2 conformance.

  for Posix.2 conformance.

* The archive-reading code now reads both BSD-style and SYSV-style archives

* The archive-reading code now reads both BSD-style and SYSV-style archives

  independently of the selected target format.  This is to encourage people to

  independently of the selected target format.  This is to encourage people to

  switch to SYSV-format, which has a number of advantages.

  switch to SYSV-format, which has a number of advantages.

* The strip and copy programs now have options to remove debug-symbols only

* The strip and copy programs now have options to remove debug-symbols only

  and/or local symbols only.  They now also support long options.

  and/or local symbols only.  They now also support long options.

Local variables:

Local variables:

fill-column: 79

fill-column: 79

End:

End: