#!/usr/bin/tclsh
|
#!/usr/bin/tclsh
|
#------------------------------------------------------------------------------
|
#------------------------------------------------------------------------------
|
# Copyright (C) 2001 Authors
|
# Copyright (C) 2001 Authors
|
#
|
#
|
# This source file may be used and distributed without restriction provided
|
# This source file may be used and distributed without restriction provided
|
# that this copyright statement is not removed from the file and that any
|
# that this copyright statement is not removed from the file and that any
|
# derivative work contains the original copyright notice and the associated
|
# derivative work contains the original copyright notice and the associated
|
# disclaimer.
|
# disclaimer.
|
#
|
#
|
# This source file is free software; you can redistribute it and/or modify
|
# This source file is free software; you can redistribute it and/or modify
|
# it under the terms of the GNU Lesser General Public License as published
|
# it under the terms of the GNU Lesser General Public License as published
|
# by the Free Software Foundation; either version 2.1 of the License, or
|
# by the Free Software Foundation; either version 2.1 of the License, or
|
# (at your option) any later version.
|
# (at your option) any later version.
|
#
|
#
|
# This source is distributed in the hope that it will be useful, but WITHOUT
|
# This source is distributed in the hope that it will be useful, but WITHOUT
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
|
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
|
# License for more details.
|
# License for more details.
|
#
|
#
|
# You should have received a copy of the GNU Lesser General Public License
|
# You should have received a copy of the GNU Lesser General Public License
|
# along with this source; if not, write to the Free Software Foundation,
|
# along with this source; if not, write to the Free Software Foundation,
|
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
#
|
#
|
#------------------------------------------------------------------------------
|
#------------------------------------------------------------------------------
|
#
|
#
|
# File Name: openmsp430-gdbproxy.tcl
|
# File Name: openmsp430-gdbproxy.tcl
|
#
|
#
|
# Author(s):
|
# Author(s):
|
# - Olivier Girard, olgirard@gmail.com
|
# - Olivier Girard, olgirard@gmail.com
|
#
|
#
|
#------------------------------------------------------------------------------
|
#------------------------------------------------------------------------------
|
# $Rev: 198 $
|
# $Rev: 210 $
|
# $LastChangedBy: olivier.girard $
|
# $LastChangedBy: olivier.girard $
|
# $LastChangedDate: 2014-10-07 21:30:05 +0200 (Tue, 07 Oct 2014) $
|
# $LastChangedDate: 2015-11-17 10:57:08 +0100 (Tue, 17 Nov 2015) $
|
#------------------------------------------------------------------------------
|
#------------------------------------------------------------------------------
|
|
|
###############################################################################
|
###############################################################################
|
# #
|
# #
|
# SOURCE LIBRARIES #
|
# SOURCE LIBRARIES #
|
# #
|
# #
|
###############################################################################
|
###############################################################################
|
|
|
# Get library path
|
# Get library path
|
set current_file [info script]
|
set current_file [info script]
|
if {[file type $current_file]=="link"} {
|
if {[file type $current_file]=="link"} {
|
set current_file [file readlink $current_file]
|
set current_file [file readlink $current_file]
|
}
|
}
|
set lib_path [file dirname $current_file]/../lib/tcl-lib
|
set lib_path [file dirname $current_file]/../lib/tcl-lib
|
|
|
# Source library
|
# Source library
|
source $lib_path/dbg_functions.tcl
|
source $lib_path/dbg_functions.tcl
|
source $lib_path/dbg_utils.tcl
|
source $lib_path/dbg_utils.tcl
|
|
|
# Source remaining files
|
# Source remaining files
|
source [file dirname $current_file]/../openmsp430-gdbproxy/server.tcl
|
source [file dirname $current_file]/../openmsp430-gdbproxy/server.tcl
|
source [file dirname $current_file]/../openmsp430-gdbproxy/commands.tcl
|
source [file dirname $current_file]/../openmsp430-gdbproxy/commands.tcl
|
|
|
|
|
###############################################################################
|
###############################################################################
|
# #
|
# #
|
# GLOBAL VARIABLES #
|
# GLOBAL VARIABLES #
|
# #
|
# #
|
###############################################################################
|
###############################################################################
|
|
|
global omsp_conf
|
global omsp_conf
|
global omsp_info
|
global omsp_info
|
|
|
global omsp_nr
|
global omsp_nr
|
|
|
global mem_mapping
|
global mem_mapping
|
|
|
global gui_dbg_if
|
global gui_dbg_if
|
global gui_adapter
|
global gui_adapter
|
global clients
|
global clients
|
global server
|
global server
|
global verbose
|
global verbose
|
global shell
|
global shell
|
global breakSelect
|
global breakSelect
|
global mspgcc_compat_mode
|
global mspgcc_compat_mode
|
|
|
# Initialize to default values
|
# Initialize to default values
|
set omsp_nr 1
|
set omsp_nr 1
|
set omsp_conf(interface) uart_generic
|
set omsp_conf(interface) uart_generic
|
set omsp_conf(device) [lindex [utils::uart_port_list] end]
|
set omsp_conf(device) [lindex [utils::uart_port_list] end]
|
set omsp_conf(baudrate) [lindex [GetAllowedSpeeds] 1]
|
set omsp_conf(baudrate) [lindex [GetAllowedSpeeds] 1]
|
set omsp_conf(0,cpuaddr) 50
|
set omsp_conf(0,cpuaddr) 50
|
set omsp_conf(1,cpuaddr) 51
|
set omsp_conf(1,cpuaddr) 51
|
set omsp_conf(2,cpuaddr) 52
|
set omsp_conf(2,cpuaddr) 52
|
set omsp_conf(3,cpuaddr) 53
|
set omsp_conf(3,cpuaddr) 53
|
|
|
set server(0,port) 2000
|
set server(0,port) 2000
|
set server(1,port) 2001
|
set server(1,port) 2001
|
set server(2,port) 2002
|
set server(2,port) 2002
|
set server(3,port) 2003
|
set server(3,port) 2003
|
|
|
set mem_mapping(0) 0
|
set mem_mapping(0) 0
|
set mem_mapping(1) 0
|
set mem_mapping(1) 0
|
set mem_mapping(2) 0
|
set mem_mapping(2) 0
|
set mem_mapping(3) 0
|
set mem_mapping(3) 0
|
|
|
set breakSelect 0
|
set breakSelect 0
|
|
|
set shell 0
|
set shell 0
|
set verbose 0
|
set verbose 0
|
set mspgcc_compat_mode 0
|
set mspgcc_compat_mode 0
|
|
|
###############################################################################
|
###############################################################################
|
# #
|
# #
|
# PARAMETER CHECK #
|
# PARAMETER CHECK #
|
# #
|
# #
|
###############################################################################
|
###############################################################################
|
|
|
proc help {} {
|
proc help {} {
|
puts ""
|
puts ""
|
puts "USAGE : openmsp430-gdbproxy.tcl \[-device <communication port>\]"
|
puts "USAGE : openmsp430-gdbproxy.tcl \[-device <communication port>\]"
|
puts " \[-adaptor <adaptor type>\]"
|
puts " \[-adaptor <adaptor type>\]"
|
puts " \[-speed <communication speed>\]"
|
puts " \[-speed <communication speed>\]"
|
puts " \[-i2c_addr <cpu address>\]"
|
puts " \[-i2c_addr <cpu address>\]"
|
puts " \[-port <server port>\]"
|
puts " \[-port <server port>\]"
|
puts " \[-shell]"
|
puts " \[-shell]"
|
puts " \[-verbose\]"
|
puts " \[-verbose\]"
|
puts " \[-mspgcc_compat_mode\]"
|
puts " \[-mspgcc_compat_mode\]"
|
puts " \[-help\]"
|
puts " \[-help\]"
|
puts ""
|
puts ""
|
puts "Examples: openmsp430-gdbproxy.tcl -device /dev/ttyUSB0 -adaptor uart_generic -speed 115200 -port 2000"
|
puts "Examples: openmsp430-gdbproxy.tcl -device /dev/ttyUSB0 -adaptor uart_generic -speed 115200 -port 2000"
|
puts " openmsp430-gdbproxy.tcl -device COM2: -adaptor i2c_usb-iss -speed I2C_S_100KHZ -i2c_addr 75 -port 2000"
|
puts " openmsp430-gdbproxy.tcl -device COM2: -adaptor i2c_usb-iss -speed I2C_S_100KHZ -i2c_addr 75 -port 2000"
|
puts ""
|
puts ""
|
}
|
}
|
|
|
# Parse arguments
|
# Parse arguments
|
for {set i 0} {$i < $argc} {incr i} {
|
for {set i 0} {$i < $argc} {incr i} {
|
switch -exact -- [lindex $argv $i] {
|
switch -exact -- [lindex $argv $i] {
|
-device {set omsp_conf(device) [lindex $argv [expr $i+1]]; incr i}
|
-device {set omsp_conf(device) [lindex $argv [expr $i+1]]; incr i}
|
-adaptor {set omsp_conf(interface) [lindex $argv [expr $i+1]]; incr i}
|
-adaptor {set omsp_conf(interface) [lindex $argv [expr $i+1]]; incr i}
|
-speed {set omsp_conf(baudrate) [lindex $argv [expr $i+1]]; incr i}
|
-speed {set omsp_conf(baudrate) [lindex $argv [expr $i+1]]; incr i}
|
-i2c_addr {set omsp_conf(0,cpuaddr) [lindex $argv [expr $i+1]]; incr i}
|
-i2c_addr {set omsp_conf(0,cpuaddr) [lindex $argv [expr $i+1]]; incr i}
|
-port {set server(0,port) [lindex $argv [expr $i+1]]; incr i}
|
-port {set server(0,port) [lindex $argv [expr $i+1]]; incr i}
|
-shell {set shell 1}
|
-shell {set shell 1}
|
-verbose {set verbose 1}
|
-verbose {set verbose 1}
|
-mspgcc_compat_mode {set mspgcc_compat_mode 1}
|
-mspgcc_compat_mode {set mspgcc_compat_mode 1}
|
-h {help; exit 0}
|
-h {help; exit 0}
|
-help {help; exit 0}
|
-help {help; exit 0}
|
default {}
|
default {}
|
}
|
}
|
}
|
}
|
|
|
# Make sure the selected adptor is valid
|
# Make sure the selected adptor is valid
|
if {![string eq $omsp_conf(interface) "uart_generic"] &
|
if {![string eq $omsp_conf(interface) "uart_generic"] &
|
![string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
![string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
puts "\nERROR: Specified adaptor is not valid (should be \"uart_generic\" or \"i2c_usb-iss\")"
|
puts "\nERROR: Specified adaptor is not valid (should be \"uart_generic\" or \"i2c_usb-iss\")"
|
help
|
help
|
exit 1
|
exit 1
|
}
|
}
|
|
|
# Make sure the I2C address is an integer
|
# Make sure the I2C address is an integer
|
if {![string is integer $omsp_conf(0,cpuaddr)]} {
|
if {![string is integer $omsp_conf(0,cpuaddr)]} {
|
puts "\nERROR: Specified I2C address is not an integer"
|
puts "\nERROR: Specified I2C address is not an integer"
|
help
|
help
|
exit 1
|
exit 1
|
}
|
}
|
|
|
# Make sure the I2C address is valid
|
# Make sure the I2C address is valid
|
if {($omsp_conf(0,cpuaddr)<8) | ($omsp_conf(0,cpuaddr)>119)} {
|
if {($omsp_conf(0,cpuaddr)<8) | ($omsp_conf(0,cpuaddr)>119)} {
|
puts "\nERROR: Specified I2C address should lay between 7 and 120"
|
puts "\nERROR: Specified I2C address should lay between 7 and 120"
|
help
|
help
|
exit 1
|
exit 1
|
}
|
}
|
|
|
# If the selected interface is a UART, make sure the selected speed is an integer
|
# If the selected interface is a UART, make sure the selected speed is an integer
|
if {[string eq $omsp_conf(interface) "uart_generic"]} {
|
if {[string eq $omsp_conf(interface) "uart_generic"]} {
|
if {![string is integer $omsp_conf(baudrate)]} {
|
if {![string is integer $omsp_conf(baudrate)]} {
|
puts "\nERROR: Specified UART communication speed is not an integer"
|
puts "\nERROR: Specified UART communication speed is not an integer"
|
help
|
help
|
exit 1
|
exit 1
|
}
|
}
|
} elseif {[string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
} elseif {[string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
if {[lsearch [lindex [GetAllowedSpeeds] 2] $omsp_conf(baudrate)]==-1} {
|
if {[lsearch [lindex [GetAllowedSpeeds] 2] $omsp_conf(baudrate)]==-1} {
|
puts "\nERROR: Specified I2C communication speed is not valid."
|
puts "\nERROR: Specified I2C communication speed is not valid."
|
puts " Allowed values are:"
|
puts " Allowed values are:"
|
foreach allowedVal [lindex [GetAllowedSpeeds] 2] {
|
foreach allowedVal [lindex [GetAllowedSpeeds] 2] {
|
puts " - $allowedVal"
|
puts " - $allowedVal"
|
}
|
}
|
puts ""
|
puts ""
|
exit 1
|
exit 1
|
}
|
}
|
}
|
}
|
|
|
# Source additional library for graphical interface
|
# Source additional library for graphical interface
|
if {!$shell} {
|
if {!$shell} {
|
source $lib_path/combobox.tcl
|
source $lib_path/combobox.tcl
|
package require combobox 2.3
|
package require combobox 2.3
|
catch {namespace import combobox::*}
|
catch {namespace import combobox::*}
|
}
|
}
|
|
|
# Small functions to display messages
|
# Small functions to display messages
|
proc putsLog {string {nonewline 0}} {
|
proc putsLog {string {nonewline 0}} {
|
global server
|
global server
|
global shell
|
global shell
|
if {$shell} {
|
if {$shell} {
|
if {$nonewline} {
|
if {$nonewline} {
|
puts -nonewline $string
|
puts -nonewline $string
|
} else {
|
} else {
|
puts $string
|
puts $string
|
}
|
}
|
} else {
|
} else {
|
if {$nonewline} {
|
if {$nonewline} {
|
$server(log) insert end "$string"
|
$server(log) insert end "$string"
|
} else {
|
} else {
|
$server(log) insert end "$string\n"
|
$server(log) insert end "$string\n"
|
}
|
}
|
$server(log) see end
|
$server(log) see end
|
}
|
}
|
}
|
}
|
proc putsVerbose {string} {
|
proc putsVerbose {string} {
|
global verbose
|
global verbose
|
if {$verbose} {
|
if {$verbose} {
|
putsLog "$string"
|
putsLog "$string"
|
}
|
}
|
}
|
}
|
|
|
###############################################################################
|
###############################################################################
|
# SHELL MODE #
|
# SHELL MODE #
|
###############################################################################
|
###############################################################################
|
if {$shell} {
|
if {$shell} {
|
|
|
# Connect to device
|
# Connect to device
|
if {![GetDevice 0]} {
|
if {![GetDevice 0]} {
|
puts "ERROR: Could not open $omsp_conf(device)"
|
puts "ERROR: Could not open $omsp_conf(device)"
|
puts "INFO: Available serial ports are:"
|
puts "INFO: Available serial ports are:"
|
foreach port [utils::uart_port_list] {
|
foreach port [utils::uart_port_list] {
|
puts "INFO: - $port"
|
puts "INFO: - $port"
|
}
|
}
|
if {[string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
if {[string eq $omsp_conf(interface) "i2c_usb-iss"]} {
|
puts "\nMake sure the specified I2C device address is correct: $omsp_conf(0,cpuaddr)\n"
|
puts "\nMake sure the specified I2C device address is correct: $omsp_conf(0,cpuaddr)\n"
|
}
|
}
|
exit 1
|
exit 1
|
}
|
}
|
|
|
# Display info
|
# Display info
|
if {$omsp_info(0,alias)==""} {
|
if {$omsp_info(0,alias)==""} {
|
puts "INFO: Sucessfully connected with the openMSP430 target."
|
puts "INFO: Sucessfully connected with the openMSP430 target."
|
} else {
|
} else {
|
puts "INFO: Sucessfully connected with the openMSP430 target ($omsp_info(0,alias))."
|
puts "INFO: Sucessfully connected with the openMSP430 target ($omsp_info(0,alias))."
|
}
|
}
|
set sizes [GetCPU_ID_SIZE 0]
|
set sizes [GetCPU_ID_SIZE 0]
|
if {$omsp_info(0,asic)} {
|
if {$omsp_info(0,asic)} {
|
puts "INFO: CPU Version - $omsp_info(0,cpu_ver) / ASIC"
|
puts "INFO: CPU Version - $omsp_info(0,cpu_ver) / ASIC"
|
} else {
|
} else {
|
puts "INFO: CPU Version - $omsp_info(0,cpu_ver) / FPGA"
|
puts "INFO: CPU Version - $omsp_info(0,cpu_ver) / FPGA"
|
}
|
}
|
puts "INFO: User Version - $omsp_info(0,user_ver)"
|
puts "INFO: User Version - $omsp_info(0,user_ver)"
|
if {$omsp_info(0,cpu_ver)==1} {
|
if {$omsp_info(0,cpu_ver)==1} {
|
puts "INFO: Hardware Multiplier - --"
|
puts "INFO: Hardware Multiplier - --"
|
} elseif {$omsp_info(0,mpy)} {
|
} elseif {$omsp_info(0,mpy)} {
|
puts "INFO: Hardware Multiplier - Yes"
|
puts "INFO: Hardware Multiplier - Yes"
|
} else {
|
} else {
|
puts "INFO: Hardware Multiplier - No"
|
puts "INFO: Hardware Multiplier - No"
|
}
|
}
|
puts "INFO: Program Memory Size - $omsp_info(0,pmem_size) B"
|
puts "INFO: Program Memory Size - $omsp_info(0,pmem_size) B"
|
puts "INFO: Data Memory Size - $omsp_info(0,dmem_size) B"
|
puts "INFO: Data Memory Size - $omsp_info(0,dmem_size) B"
|
puts "INFO: Peripheral Address Space - $omsp_info(0,per_size) B"
|
puts "INFO: Peripheral Address Space - $omsp_info(0,per_size) B"
|
puts "INFO: $omsp_info(0,hw_break) Hardware Brea/Watch-point unit(s) detected"
|
puts "INFO: $omsp_info(0,hw_break) Hardware Brea/Watch-point unit(s) detected"
|
puts ""
|
puts ""
|
|
|
# Reset & Stop CPU
|
# Reset & Stop CPU
|
ExecutePOR_Halt 0
|
ExecutePOR_Halt 0
|
|
|
# Start server for GDB
|
# Start server for GDB
|
if {![startServer 0]} {
|
if {![startServer 0]} {
|
|
utils::uart_close
|
exit 1
|
exit 1
|
}
|
}
|
|
|
vwait forever
|
vwait forever
|
}
|
}
|
|
|
proc getConfiguration {} {
|
proc getConfiguration {} {
|
|
|
global gui_dbg_if
|
global gui_dbg_if
|
global gui_adapter
|
global gui_adapter
|
global omsp_conf
|
global omsp_conf
|
|
|
regexp {(.+)_(.+)} $omsp_conf(interface) whole_match tmp_if tmp_adapter
|
regexp {(.+)_(.+)} $omsp_conf(interface) whole_match tmp_if tmp_adapter
|
|
|
set gui_dbg_if [string toupper $tmp_if]
|
set gui_dbg_if [string toupper $tmp_if]
|
set gui_adapter [string toupper $tmp_adapter]
|
set gui_adapter [string toupper $tmp_adapter]
|
|
|
return 1
|
return 1
|
}
|
}
|
|
|
proc updateConfiguration {{w ""} {sel ""}} {
|
proc updateConfiguration {{w ""} {sel ""}} {
|
|
|
global gui_dbg_if
|
global gui_dbg_if
|
global gui_adapter
|
global gui_adapter
|
global omsp_conf
|
global omsp_conf
|
global omsp_nr
|
global omsp_nr
|
|
|
if {$sel=="UART"} {
|
if {$sel=="UART"} {
|
eval .connect.cfg.if.config2.adapter.p2 list delete 0 end
|
eval .connect.cfg.if.config2.adapter.p2 list delete 0 end
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "GENERIC"]
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "GENERIC"]
|
set gui_adapter "GENERIC"
|
set gui_adapter "GENERIC"
|
set omsp_conf(interface) uart_generic
|
set omsp_conf(interface) uart_generic
|
|
|
} elseif {$sel=="I2C"} {
|
} elseif {$sel=="I2C"} {
|
|
|
eval .connect.cfg.if.config2.adapter.p2 list delete 0 end
|
eval .connect.cfg.if.config2.adapter.p2 list delete 0 end
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "USB-ISS"]
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "USB-ISS"]
|
set gui_adapter "USB-ISS"
|
set gui_adapter "USB-ISS"
|
set omsp_conf(interface) i2c_usb-iss
|
set omsp_conf(interface) i2c_usb-iss
|
}
|
}
|
|
|
if {$gui_dbg_if=="UART"} {
|
if {$gui_dbg_if=="UART"} {
|
set omsp_nr 1
|
set omsp_nr 1
|
.connect.cfg.ad.i2c_nr.l configure -state disabled
|
.connect.cfg.ad.i2c_nr.l configure -state disabled
|
.connect.cfg.ad.i2c_nr.s configure -state disabled
|
.connect.cfg.ad.i2c_nr.s configure -state disabled
|
.connect.cfg.ad.i2c_addr.l configure -state disabled
|
.connect.cfg.ad.i2c_addr.l configure -state disabled
|
.connect.cfg.ad.i2c_addr.s0 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s0 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s1 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s1 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s2 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s2 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s3 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s3 configure -state disabled
|
.connect.cfg.ad.arrow.l0 configure -state disabled
|
.connect.cfg.ad.arrow.l0 configure -state disabled
|
.connect.cfg.ad.arrow.l1 configure -state disabled
|
.connect.cfg.ad.arrow.l1 configure -state disabled
|
.connect.cfg.ad.arrow.l2 configure -state disabled
|
.connect.cfg.ad.arrow.l2 configure -state disabled
|
.connect.cfg.ad.arrow.l3 configure -state disabled
|
.connect.cfg.ad.arrow.l3 configure -state disabled
|
.connect.cfg.ad.server_port.p0 configure -state normal
|
.connect.cfg.ad.server_port.p0 configure -state normal
|
.connect.cfg.ad.server_port.p1 configure -state disabled
|
.connect.cfg.ad.server_port.p1 configure -state disabled
|
.connect.cfg.ad.server_port.p2 configure -state disabled
|
.connect.cfg.ad.server_port.p2 configure -state disabled
|
.connect.cfg.ad.server_port.p3 configure -state disabled
|
.connect.cfg.ad.server_port.p3 configure -state disabled
|
.connect.cfg.ad.core_nr.l0 configure -state disabled
|
.connect.cfg.ad.core_nr.l0 configure -state disabled
|
.connect.cfg.ad.core_nr.l1 configure -state disabled
|
.connect.cfg.ad.core_nr.l1 configure -state disabled
|
.connect.cfg.ad.core_nr.l2 configure -state disabled
|
.connect.cfg.ad.core_nr.l2 configure -state disabled
|
.connect.cfg.ad.core_nr.l3 configure -state disabled
|
.connect.cfg.ad.core_nr.l3 configure -state disabled
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state disabled
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state disabled
|
if {[winfo exists .omsp_sft_brk]} {
|
if {[winfo exists .omsp_sft_brk]} {
|
updateSoftBreakpoints
|
updateSoftBreakpoints
|
}
|
}
|
|
|
} elseif {$gui_dbg_if=="I2C"} {
|
} elseif {$gui_dbg_if=="I2C"} {
|
.connect.cfg.ad.core_nr.l0 configure -state normal
|
.connect.cfg.ad.core_nr.l0 configure -state normal
|
.connect.cfg.ad.i2c_nr.l configure -state normal
|
.connect.cfg.ad.i2c_nr.l configure -state normal
|
.connect.cfg.ad.i2c_nr.s configure -state normal
|
.connect.cfg.ad.i2c_nr.s configure -state normal
|
.connect.cfg.ad.i2c_addr.l configure -state normal
|
.connect.cfg.ad.i2c_addr.l configure -state normal
|
.connect.cfg.ad.i2c_addr.s0 configure -state normal
|
.connect.cfg.ad.i2c_addr.s0 configure -state normal
|
.connect.cfg.ad.arrow.l0 configure -state normal
|
.connect.cfg.ad.arrow.l0 configure -state normal
|
.connect.cfg.ad.server_port.p0 configure -state normal
|
.connect.cfg.ad.server_port.p0 configure -state normal
|
|
|
if {$omsp_nr < 2} {
|
if {$omsp_nr < 2} {
|
.connect.cfg.ad.core_nr.l1 configure -state disabled
|
.connect.cfg.ad.core_nr.l1 configure -state disabled
|
.connect.cfg.ad.server_port.p1 configure -state disabled
|
.connect.cfg.ad.server_port.p1 configure -state disabled
|
.connect.cfg.ad.arrow.l1 configure -state disabled
|
.connect.cfg.ad.arrow.l1 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s1 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s1 configure -state disabled
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state disabled
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state disabled
|
} else {
|
} else {
|
.connect.cfg.ad.core_nr.l1 configure -state normal
|
.connect.cfg.ad.core_nr.l1 configure -state normal
|
.connect.cfg.ad.server_port.p1 configure -state normal
|
.connect.cfg.ad.server_port.p1 configure -state normal
|
.connect.cfg.ad.arrow.l1 configure -state normal
|
.connect.cfg.ad.arrow.l1 configure -state normal
|
.connect.cfg.ad.i2c_addr.s1 configure -state normal
|
.connect.cfg.ad.i2c_addr.s1 configure -state normal
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state normal
|
.connect.cfg.ad.i2c_nr.f.soft.b configure -state normal
|
}
|
}
|
|
|
if {$omsp_nr < 3} {
|
if {$omsp_nr < 3} {
|
.connect.cfg.ad.core_nr.l2 configure -state disabled
|
.connect.cfg.ad.core_nr.l2 configure -state disabled
|
.connect.cfg.ad.server_port.p2 configure -state disabled
|
.connect.cfg.ad.server_port.p2 configure -state disabled
|
.connect.cfg.ad.arrow.l2 configure -state disabled
|
.connect.cfg.ad.arrow.l2 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s2 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s2 configure -state disabled
|
} else {
|
} else {
|
.connect.cfg.ad.core_nr.l2 configure -state normal
|
.connect.cfg.ad.core_nr.l2 configure -state normal
|
.connect.cfg.ad.server_port.p2 configure -state normal
|
.connect.cfg.ad.server_port.p2 configure -state normal
|
.connect.cfg.ad.arrow.l2 configure -state normal
|
.connect.cfg.ad.arrow.l2 configure -state normal
|
.connect.cfg.ad.i2c_addr.s2 configure -state normal
|
.connect.cfg.ad.i2c_addr.s2 configure -state normal
|
}
|
}
|
|
|
if {$omsp_nr < 4} {
|
if {$omsp_nr < 4} {
|
.connect.cfg.ad.core_nr.l3 configure -state disabled
|
.connect.cfg.ad.core_nr.l3 configure -state disabled
|
.connect.cfg.ad.server_port.p3 configure -state disabled
|
.connect.cfg.ad.server_port.p3 configure -state disabled
|
.connect.cfg.ad.arrow.l3 configure -state disabled
|
.connect.cfg.ad.arrow.l3 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s3 configure -state disabled
|
.connect.cfg.ad.i2c_addr.s3 configure -state disabled
|
} else {
|
} else {
|
.connect.cfg.ad.core_nr.l3 configure -state normal
|
.connect.cfg.ad.core_nr.l3 configure -state normal
|
.connect.cfg.ad.server_port.p3 configure -state normal
|
.connect.cfg.ad.server_port.p3 configure -state normal
|
.connect.cfg.ad.arrow.l3 configure -state normal
|
.connect.cfg.ad.arrow.l3 configure -state normal
|
.connect.cfg.ad.i2c_addr.s3 configure -state normal
|
.connect.cfg.ad.i2c_addr.s3 configure -state normal
|
}
|
}
|
updateSoftBreakpoints
|
updateSoftBreakpoints
|
}
|
}
|
|
|
.connect.cfg.if.config2.serial_port.p2 configure -editable 1
|
.connect.cfg.if.config2.serial_port.p2 configure -editable 1
|
eval .connect.cfg.if.config2.serial_port.p2 list delete 0 end
|
eval .connect.cfg.if.config2.serial_port.p2 list delete 0 end
|
eval .connect.cfg.if.config2.serial_port.p2 list insert end [lindex [GetAllowedSpeeds] 2]
|
eval .connect.cfg.if.config2.serial_port.p2 list insert end [lindex [GetAllowedSpeeds] 2]
|
set omsp_conf(baudrate) [lindex [GetAllowedSpeeds] 1];
|
set omsp_conf(baudrate) [lindex [GetAllowedSpeeds] 1];
|
.connect.cfg.if.config2.serial_port.p2 configure -editable [lindex [GetAllowedSpeeds] 0];
|
.connect.cfg.if.config2.serial_port.p2 configure -editable [lindex [GetAllowedSpeeds] 0];
|
|
|
}
|
}
|
|
|
###############################################################################
|
###############################################################################
|
# GUI MODE #
|
# GUI MODE #
|
###############################################################################
|
###############################################################################
|
|
|
####################################
|
####################################
|
# CREATE & PLACE MAIN WIDGETS #
|
# CREATE & PLACE MAIN WIDGETS #
|
####################################
|
####################################
|
|
|
wm title . "openMSP430 GDB Proxy"
|
wm title . "openMSP430 GDB Proxy"
|
wm iconname . "openMSP430 GDB Proxy"
|
wm iconname . "openMSP430 GDB Proxy"
|
|
|
# Create the Main Menu frame
|
# Create the Main Menu frame
|
frame .menu
|
frame .menu
|
pack .menu -side top -padx 10 -pady 10 -fill x
|
pack .menu -side top -padx 10 -pady 10 -fill x
|
|
|
# Create the Connection frame
|
# Create the Connection frame
|
frame .connect -bd 2 -relief ridge ;# solid
|
frame .connect -bd 2 -relief ridge ;# solid
|
pack .connect -side top -padx 10 -pady {5 0} -fill x
|
pack .connect -side top -padx 10 -pady {5 0} -fill x
|
|
|
# Create the Info frame
|
# Create the Info frame
|
frame .info -bd 2 -relief ridge ;# solid
|
frame .info -bd 2 -relief ridge ;# solid
|
pack .info -side top -padx 10 -pady {10 0} -fill x
|
pack .info -side top -padx 10 -pady {10 0} -fill x
|
|
|
# Create the Server frame
|
# Create the Server frame
|
frame .server -bd 2 -relief ridge ;# solid
|
frame .server -bd 2 -relief ridge ;# solid
|
pack .server -side top -padx 10 -pady {10 0} -fill x
|
pack .server -side top -padx 10 -pady {10 0} -fill x
|
|
|
# Create the TCL script field
|
# Create the TCL script field
|
frame .tclscript -bd 2 -relief ridge ;# solid
|
frame .tclscript -bd 2 -relief ridge ;# solid
|
pack .tclscript -side top -padx 10 -pady 10 -fill x
|
pack .tclscript -side top -padx 10 -pady 10 -fill x
|
|
|
|
|
####################################
|
####################################
|
# CREATE THE REST #
|
# CREATE THE REST #
|
####################################
|
####################################
|
|
|
# Exit button
|
# Exit button
|
button .menu.exit -text "Exit" -command {stopAllServers; exit 0}
|
button .menu.exit -text "Exit" -command {stopAllServers; utils::uart_close; exit 0}
|
pack .menu.exit -side left
|
pack .menu.exit -side left
|
|
|
# openMSP430 label
|
# openMSP430 label
|
label .menu.omsp -text "openMSP430 GDB proxy" -anchor center -fg "\#6a5acd" -font {-weight bold -size 14}
|
label .menu.omsp -text "openMSP430 GDB proxy" -anchor center -fg "\#6a5acd" -font {-weight bold -size 14}
|
pack .menu.omsp -side right -padx 20
|
pack .menu.omsp -side right -padx 20
|
|
|
# Create the Configuration, Start & Info frames
|
# Create the Configuration, Start & Info frames
|
getConfiguration
|
getConfiguration
|
frame .connect.cfg
|
frame .connect.cfg
|
pack .connect.cfg -side left -padx 0 -pady 0 -fill x -expand true
|
pack .connect.cfg -side left -padx 0 -pady 0 -fill x -expand true
|
frame .connect.cfg.if -bd 2 -relief ridge
|
frame .connect.cfg.if -bd 2 -relief ridge
|
pack .connect.cfg.if -side top -padx 10 -pady {10 0} -fill x -expand true
|
pack .connect.cfg.if -side top -padx 10 -pady {10 0} -fill x -expand true
|
frame .connect.cfg.ad -bd 2 -relief ridge
|
frame .connect.cfg.ad -bd 2 -relief ridge
|
pack .connect.cfg.ad -side top -padx 10 -pady 10 -fill both -expand true
|
pack .connect.cfg.ad -side top -padx 10 -pady 10 -fill both -expand true
|
frame .connect.start
|
frame .connect.start
|
pack .connect.start -side right -padx 10 -pady 10 -fill both -expand true
|
pack .connect.start -side right -padx 10 -pady 10 -fill both -expand true
|
|
|
frame .connect.cfg.if.config1
|
frame .connect.cfg.if.config1
|
pack .connect.cfg.if.config1 -side left -padx 0 -pady 0 -fill x -expand true
|
pack .connect.cfg.if.config1 -side left -padx 0 -pady 0 -fill x -expand true
|
frame .connect.cfg.if.config2
|
frame .connect.cfg.if.config2
|
pack .connect.cfg.if.config2 -side left -padx 0 -pady 0 -fill x -expand true
|
pack .connect.cfg.if.config2 -side left -padx 0 -pady 0 -fill x -expand true
|
|
|
# Interface & Adapter selection
|
# Interface & Adapter selection
|
frame .connect.cfg.if.config1.adapter
|
frame .connect.cfg.if.config1.adapter
|
pack .connect.cfg.if.config1.adapter -side top -padx 5 -pady {10 0} -fill x
|
pack .connect.cfg.if.config1.adapter -side top -padx 5 -pady {10 0} -fill x
|
label .connect.cfg.if.config1.adapter.l1 -text "Serial Debug Interface:" -anchor w
|
label .connect.cfg.if.config1.adapter.l1 -text "Serial Debug Interface:" -anchor w
|
pack .connect.cfg.if.config1.adapter.l1 -side left -padx 5
|
pack .connect.cfg.if.config1.adapter.l1 -side left -padx 5
|
combobox .connect.cfg.if.config1.adapter.p1 -textvariable gui_dbg_if -editable false -width 15 -command {updateConfiguration}
|
combobox .connect.cfg.if.config1.adapter.p1 -textvariable gui_dbg_if -editable false -width 15 -command {updateConfiguration}
|
eval .connect.cfg.if.config1.adapter.p1 list insert end [list "UART" "I2C"]
|
eval .connect.cfg.if.config1.adapter.p1 list insert end [list "UART" "I2C"]
|
pack .connect.cfg.if.config1.adapter.p1 -side right -padx 10
|
pack .connect.cfg.if.config1.adapter.p1 -side right -padx 10
|
|
|
frame .connect.cfg.if.config2.adapter
|
frame .connect.cfg.if.config2.adapter
|
pack .connect.cfg.if.config2.adapter -side top -padx 5 -pady {10 0} -fill x
|
pack .connect.cfg.if.config2.adapter -side top -padx 5 -pady {10 0} -fill x
|
label .connect.cfg.if.config2.adapter.l2 -text "Adapter selection:" -anchor w
|
label .connect.cfg.if.config2.adapter.l2 -text "Adapter selection:" -anchor w
|
pack .connect.cfg.if.config2.adapter.l2 -side left -padx 5
|
pack .connect.cfg.if.config2.adapter.l2 -side left -padx 5
|
combobox .connect.cfg.if.config2.adapter.p2 -textvariable gui_adapter -editable false -width 15
|
combobox .connect.cfg.if.config2.adapter.p2 -textvariable gui_adapter -editable false -width 15
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "GENERIC"]
|
eval .connect.cfg.if.config2.adapter.p2 list insert end [list "GENERIC"]
|
pack .connect.cfg.if.config2.adapter.p2 -side right -padx 5
|
pack .connect.cfg.if.config2.adapter.p2 -side right -padx 5
|
|
|
# Device port & Speed selection
|
# Device port & Speed selection
|
frame .connect.cfg.if.config1.serial_port
|
frame .connect.cfg.if.config1.serial_port
|
pack .connect.cfg.if.config1.serial_port -side top -padx 5 -pady {10 10} -fill x
|
pack .connect.cfg.if.config1.serial_port -side top -padx 5 -pady {10 10} -fill x
|
label .connect.cfg.if.config1.serial_port.l1 -text "Device Port:" -anchor w
|
label .connect.cfg.if.config1.serial_port.l1 -text "Device Port:" -anchor w
|
pack .connect.cfg.if.config1.serial_port.l1 -side left -padx 5
|
pack .connect.cfg.if.config1.serial_port.l1 -side left -padx 5
|
combobox .connect.cfg.if.config1.serial_port.p1 -textvariable omsp_conf(device) -editable true -width 15
|
combobox .connect.cfg.if.config1.serial_port.p1 -textvariable omsp_conf(device) -editable true -width 15
|
eval .connect.cfg.if.config1.serial_port.p1 list insert end [utils::uart_port_list]
|
eval .connect.cfg.if.config1.serial_port.p1 list insert end [utils::uart_port_list]
|
pack .connect.cfg.if.config1.serial_port.p1 -side right -padx 10
|
pack .connect.cfg.if.config1.serial_port.p1 -side right -padx 10
|
|
|
frame .connect.cfg.if.config2.serial_port
|
frame .connect.cfg.if.config2.serial_port
|
pack .connect.cfg.if.config2.serial_port -side top -padx 5 -pady {10 10} -fill x
|
pack .connect.cfg.if.config2.serial_port -side top -padx 5 -pady {10 10} -fill x
|
label .connect.cfg.if.config2.serial_port.l2 -text "Speed:" -anchor w
|
label .connect.cfg.if.config2.serial_port.l2 -text "Speed:" -anchor w
|
pack .connect.cfg.if.config2.serial_port.l2 -side left -padx 5
|
pack .connect.cfg.if.config2.serial_port.l2 -side left -padx 5
|
combobox .connect.cfg.if.config2.serial_port.p2 -textvariable omsp_conf(baudrate) -editable [lindex [GetAllowedSpeeds] 0] -width 15
|
combobox .connect.cfg.if.config2.serial_port.p2 -textvariable omsp_conf(baudrate) -editable [lindex [GetAllowedSpeeds] 0] -width 15
|
eval .connect.cfg.if.config2.serial_port.p2 list insert end [lindex [GetAllowedSpeeds] 2]
|
eval .connect.cfg.if.config2.serial_port.p2 list insert end [lindex [GetAllowedSpeeds] 2]
|
pack .connect.cfg.if.config2.serial_port.p2 -side right -padx 5
|
pack .connect.cfg.if.config2.serial_port.p2 -side right -padx 5
|
|
|
# Server Port field & I2C address selection
|
# Server Port field & I2C address selection
|
frame .connect.cfg.ad.core_nr
|
frame .connect.cfg.ad.core_nr
|
pack .connect.cfg.ad.core_nr -side left -padx 5 -pady {0 20} -fill y
|
pack .connect.cfg.ad.core_nr -side left -padx 5 -pady {0 20} -fill y
|
label .connect.cfg.ad.core_nr.l3 -text "Core 3:" -anchor w
|
label .connect.cfg.ad.core_nr.l3 -text "Core 3:" -anchor w
|
pack .connect.cfg.ad.core_nr.l3 -side bottom -padx {25 0} -pady {10 10}
|
pack .connect.cfg.ad.core_nr.l3 -side bottom -padx {25 0} -pady {10 10}
|
label .connect.cfg.ad.core_nr.l2 -text "Core 2:" -anchor w
|
label .connect.cfg.ad.core_nr.l2 -text "Core 2:" -anchor w
|
pack .connect.cfg.ad.core_nr.l2 -side bottom -padx {25 0} -pady {10 2}
|
pack .connect.cfg.ad.core_nr.l2 -side bottom -padx {25 0} -pady {10 2}
|
label .connect.cfg.ad.core_nr.l1 -text "Core 1:" -anchor w
|
label .connect.cfg.ad.core_nr.l1 -text "Core 1:" -anchor w
|
pack .connect.cfg.ad.core_nr.l1 -side bottom -padx {25 0} -pady {10 2}
|
pack .connect.cfg.ad.core_nr.l1 -side bottom -padx {25 0} -pady {10 2}
|
label .connect.cfg.ad.core_nr.l0 -text "Core 0:" -anchor w
|
label .connect.cfg.ad.core_nr.l0 -text "Core 0:" -anchor w
|
pack .connect.cfg.ad.core_nr.l0 -side bottom -padx {25 0} -pady {10 2}
|
pack .connect.cfg.ad.core_nr.l0 -side bottom -padx {25 0} -pady {10 2}
|
|
|
frame .connect.cfg.ad.server_port
|
frame .connect.cfg.ad.server_port
|
pack .connect.cfg.ad.server_port -side left -padx 5 -pady {0 20} -fill y
|
pack .connect.cfg.ad.server_port -side left -padx 5 -pady {0 20} -fill y
|
entry .connect.cfg.ad.server_port.p3 -textvariable server(3,port) -relief sunken -width 10
|
entry .connect.cfg.ad.server_port.p3 -textvariable server(3,port) -relief sunken -width 10
|
pack .connect.cfg.ad.server_port.p3 -side bottom -padx 5 -pady {10 10}
|
pack .connect.cfg.ad.server_port.p3 -side bottom -padx 5 -pady {10 10}
|
entry .connect.cfg.ad.server_port.p2 -textvariable server(2,port) -relief sunken -width 10
|
entry .connect.cfg.ad.server_port.p2 -textvariable server(2,port) -relief sunken -width 10
|
pack .connect.cfg.ad.server_port.p2 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.server_port.p2 -side bottom -padx 5 -pady {10 0}
|
entry .connect.cfg.ad.server_port.p1 -textvariable server(1,port) -relief sunken -width 10
|
entry .connect.cfg.ad.server_port.p1 -textvariable server(1,port) -relief sunken -width 10
|
pack .connect.cfg.ad.server_port.p1 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.server_port.p1 -side bottom -padx 5 -pady {10 0}
|
entry .connect.cfg.ad.server_port.p0 -textvariable server(0,port) -relief sunken -width 10
|
entry .connect.cfg.ad.server_port.p0 -textvariable server(0,port) -relief sunken -width 10
|
pack .connect.cfg.ad.server_port.p0 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.server_port.p0 -side bottom -padx 5 -pady {10 0}
|
label .connect.cfg.ad.server_port.l -text "Proxy Server Port" -anchor w
|
label .connect.cfg.ad.server_port.l -text "Proxy Server Port" -anchor w
|
pack .connect.cfg.ad.server_port.l -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.server_port.l -side bottom -padx 5 -pady {10 0}
|
|
|
frame .connect.cfg.ad.arrow
|
frame .connect.cfg.ad.arrow
|
pack .connect.cfg.ad.arrow -side left -padx 5 -pady {0 20} -fill y
|
pack .connect.cfg.ad.arrow -side left -padx 5 -pady {0 20} -fill y
|
label .connect.cfg.ad.arrow.l3 -text "==>" -anchor w
|
label .connect.cfg.ad.arrow.l3 -text "==>" -anchor w
|
pack .connect.cfg.ad.arrow.l3 -side bottom -padx 5 -pady {10 10}
|
pack .connect.cfg.ad.arrow.l3 -side bottom -padx 5 -pady {10 10}
|
label .connect.cfg.ad.arrow.l2 -text "==>" -anchor w
|
label .connect.cfg.ad.arrow.l2 -text "==>" -anchor w
|
pack .connect.cfg.ad.arrow.l2 -side bottom -padx 5 -pady {10 2}
|
pack .connect.cfg.ad.arrow.l2 -side bottom -padx 5 -pady {10 2}
|
label .connect.cfg.ad.arrow.l1 -text "==>" -anchor w
|
label .connect.cfg.ad.arrow.l1 -text "==>" -anchor w
|
pack .connect.cfg.ad.arrow.l1 -side bottom -padx 5 -pady {10 2}
|
pack .connect.cfg.ad.arrow.l1 -side bottom -padx 5 -pady {10 2}
|
label .connect.cfg.ad.arrow.l0 -text "==>" -anchor w
|
label .connect.cfg.ad.arrow.l0 -text "==>" -anchor w
|
pack .connect.cfg.ad.arrow.l0 -side bottom -padx 5 -pady {10 2}
|
pack .connect.cfg.ad.arrow.l0 -side bottom -padx 5 -pady {10 2}
|
|
|
frame .connect.cfg.ad.i2c_addr
|
frame .connect.cfg.ad.i2c_addr
|
pack .connect.cfg.ad.i2c_addr -side left -padx 5 -pady {0 20} -fill y
|
pack .connect.cfg.ad.i2c_addr -side left -padx 5 -pady {0 20} -fill y
|
spinbox .connect.cfg.ad.i2c_addr.s3 -from 8 -to 119 -textvariable omsp_conf(3,cpuaddr) -width 4
|
spinbox .connect.cfg.ad.i2c_addr.s3 -from 8 -to 119 -textvariable omsp_conf(3,cpuaddr) -width 4
|
pack .connect.cfg.ad.i2c_addr.s3 -side bottom -padx 5 -pady {10 10}
|
pack .connect.cfg.ad.i2c_addr.s3 -side bottom -padx 5 -pady {10 10}
|
spinbox .connect.cfg.ad.i2c_addr.s2 -from 8 -to 119 -textvariable omsp_conf(2,cpuaddr) -width 4
|
spinbox .connect.cfg.ad.i2c_addr.s2 -from 8 -to 119 -textvariable omsp_conf(2,cpuaddr) -width 4
|
pack .connect.cfg.ad.i2c_addr.s2 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.i2c_addr.s2 -side bottom -padx 5 -pady {10 0}
|
spinbox .connect.cfg.ad.i2c_addr.s1 -from 8 -to 119 -textvariable omsp_conf(1,cpuaddr) -width 4
|
spinbox .connect.cfg.ad.i2c_addr.s1 -from 8 -to 119 -textvariable omsp_conf(1,cpuaddr) -width 4
|
pack .connect.cfg.ad.i2c_addr.s1 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.i2c_addr.s1 -side bottom -padx 5 -pady {10 0}
|
spinbox .connect.cfg.ad.i2c_addr.s0 -from 8 -to 119 -textvariable omsp_conf(0,cpuaddr) -width 4
|
spinbox .connect.cfg.ad.i2c_addr.s0 -from 8 -to 119 -textvariable omsp_conf(0,cpuaddr) -width 4
|
pack .connect.cfg.ad.i2c_addr.s0 -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.i2c_addr.s0 -side bottom -padx 5 -pady {10 0}
|
label .connect.cfg.ad.i2c_addr.l -text "I2C Address" -anchor w
|
label .connect.cfg.ad.i2c_addr.l -text "I2C Address" -anchor w
|
pack .connect.cfg.ad.i2c_addr.l -side bottom -padx 5 -pady {10 0}
|
pack .connect.cfg.ad.i2c_addr.l -side bottom -padx 5 -pady {10 0}
|
|
|
frame .connect.cfg.ad.i2c_nr
|
frame .connect.cfg.ad.i2c_nr
|
pack .connect.cfg.ad.i2c_nr -side right -padx 5 -fill y
|
pack .connect.cfg.ad.i2c_nr -side right -padx 5 -fill y
|
label .connect.cfg.ad.i2c_nr.l -text "Number of cores" -anchor w
|
label .connect.cfg.ad.i2c_nr.l -text "Number of cores" -anchor w
|
pack .connect.cfg.ad.i2c_nr.l -side top -padx 50 -pady {10 0}
|
pack .connect.cfg.ad.i2c_nr.l -side top -padx 50 -pady {10 0}
|
spinbox .connect.cfg.ad.i2c_nr.s -from 1 -to 4 -textvariable omsp_nr -state readonly -width 4 -command {updateConfiguration}
|
spinbox .connect.cfg.ad.i2c_nr.s -from 1 -to 4 -textvariable omsp_nr -state readonly -width 4 -command {updateConfiguration}
|
pack .connect.cfg.ad.i2c_nr.s -side top -padx 50 -pady {10 10}
|
pack .connect.cfg.ad.i2c_nr.s -side top -padx 50 -pady {10 10}
|
|
|
frame .connect.cfg.ad.i2c_nr.f -bd 2 -relief ridge
|
frame .connect.cfg.ad.i2c_nr.f -bd 2 -relief ridge
|
pack .connect.cfg.ad.i2c_nr.f -side top -padx 10 -pady {5 5} -fill x
|
pack .connect.cfg.ad.i2c_nr.f -side top -padx 10 -pady {5 5} -fill x
|
label .connect.cfg.ad.i2c_nr.f.l2 -text "Breakpoint configuration" -anchor w
|
label .connect.cfg.ad.i2c_nr.f.l2 -text "Breakpoint configuration" -anchor w
|
pack .connect.cfg.ad.i2c_nr.f.l2 -side top -padx 0 -pady {5 10}
|
pack .connect.cfg.ad.i2c_nr.f.l2 -side top -padx 0 -pady {5 10}
|
|
|
frame .connect.cfg.ad.i2c_nr.f.soft
|
frame .connect.cfg.ad.i2c_nr.f.soft
|
pack .connect.cfg.ad.i2c_nr.f.soft -side top -padx 0 -fill x
|
pack .connect.cfg.ad.i2c_nr.f.soft -side top -padx 0 -fill x
|
radiobutton .connect.cfg.ad.i2c_nr.f.soft.r -value "0" -text "" -state normal -variable breakSelect -command {updateSoftBreakpoints}
|
radiobutton .connect.cfg.ad.i2c_nr.f.soft.r -value "0" -text "" -state normal -variable breakSelect -command {updateSoftBreakpoints}
|
pack .connect.cfg.ad.i2c_nr.f.soft.r -side left -padx {10 0} -pady {0 0}
|
pack .connect.cfg.ad.i2c_nr.f.soft.r -side left -padx {10 0} -pady {0 0}
|
label .connect.cfg.ad.i2c_nr.f.soft.l -text "Soft" -anchor w
|
label .connect.cfg.ad.i2c_nr.f.soft.l -text "Soft" -anchor w
|
pack .connect.cfg.ad.i2c_nr.f.soft.l -side left -padx {5 10} -pady {3 0}
|
pack .connect.cfg.ad.i2c_nr.f.soft.l -side left -padx {5 10} -pady {3 0}
|
button .connect.cfg.ad.i2c_nr.f.soft.b -text "Config." -state disabled -command {configSoftBreakpoints}
|
button .connect.cfg.ad.i2c_nr.f.soft.b -text "Config." -state disabled -command {configSoftBreakpoints}
|
pack .connect.cfg.ad.i2c_nr.f.soft.b -side right -padx {0 20}
|
pack .connect.cfg.ad.i2c_nr.f.soft.b -side right -padx {0 20}
|
|
|
frame .connect.cfg.ad.i2c_nr.f.hard
|
frame .connect.cfg.ad.i2c_nr.f.hard
|
pack .connect.cfg.ad.i2c_nr.f.hard -side top -padx 0 -pady {0 10} -fill x
|
pack .connect.cfg.ad.i2c_nr.f.hard -side top -padx 0 -pady {0 10} -fill x
|
radiobutton .connect.cfg.ad.i2c_nr.f.hard.r -value "1" -text "" -state normal -variable breakSelect -command {updateSoftBreakpoints}
|
radiobutton .connect.cfg.ad.i2c_nr.f.hard.r -value "1" -text "" -state normal -variable breakSelect -command {updateSoftBreakpoints}
|
pack .connect.cfg.ad.i2c_nr.f.hard.r -side left -padx {10 0} -pady {0 0}
|
pack .connect.cfg.ad.i2c_nr.f.hard.r -side left -padx {10 0} -pady {0 0}
|
label .connect.cfg.ad.i2c_nr.f.hard.l -text "Hard" -anchor w
|
label .connect.cfg.ad.i2c_nr.f.hard.l -text "Hard" -anchor w
|
pack .connect.cfg.ad.i2c_nr.f.hard.l -side left -padx {5 10} -pady {3 0}
|
pack .connect.cfg.ad.i2c_nr.f.hard.l -side left -padx {5 10} -pady {3 0}
|
|
|
# Update according to default values
|
# Update according to default values
|
updateConfiguration
|
updateConfiguration
|
|
|
# Connect to CPU & start proxy server
|
# Connect to CPU & start proxy server
|
frame .connect.start.f
|
frame .connect.start.f
|
pack .connect.start.f -side top -padx 10 -pady 0 -fill x -expand true
|
pack .connect.start.f -side top -padx 10 -pady 0 -fill x -expand true
|
button .connect.start.f.b -text "Connect to CPU(s)\n and \nStart Proxy Server(s)" -command {startServerGUI}
|
button .connect.start.f.b -text "Connect to CPU(s)\n and \nStart Proxy Server(s)" -command {startServerGUI}
|
pack .connect.start.f.b -side top -padx 30
|
pack .connect.start.f.b -side top -padx 30
|
checkbutton .connect.start.comp_mode -text "MSPGCC Compatibility Mode" -variable mspgcc_compat_mode
|
checkbutton .connect.start.comp_mode -text "MSPGCC Compatibility Mode" -variable mspgcc_compat_mode
|
pack .connect.start.comp_mode -side bottom -padx 10
|
pack .connect.start.comp_mode -side bottom -padx 10
|
|
|
|
|
# CPU Info
|
# CPU Info
|
frame .info.cpu
|
frame .info.cpu
|
pack .info.cpu -side top -padx 10 -pady {5 0} -fill x
|
pack .info.cpu -side top -padx 10 -pady {5 0} -fill x
|
label .info.cpu.l -text "CPU Info:" -anchor w
|
label .info.cpu.l -text "CPU Info:" -anchor w
|
pack .info.cpu.l -side left -padx {10 10}
|
pack .info.cpu.l -side left -padx {10 10}
|
label .info.cpu.con -text "Disconnected" -anchor w -fg Red
|
label .info.cpu.con -text "Disconnected" -anchor w -fg Red
|
pack .info.cpu.con -side left
|
pack .info.cpu.con -side left
|
button .info.cpu.more -text "More..." -width 9 -command {displayMore} -state disabled
|
button .info.cpu.more -text "More..." -width 9 -command {displayMore} -state disabled
|
pack .info.cpu.more -side right -padx {0 30}
|
pack .info.cpu.more -side right -padx {0 30}
|
|
|
|
|
# Server Info
|
# Server Info
|
frame .info.server
|
frame .info.server
|
pack .info.server -side top -padx 10 -pady {0 10} -fill x
|
pack .info.server -side top -padx 10 -pady {0 10} -fill x
|
label .info.server.l -text "Server Info:" -anchor w
|
label .info.server.l -text "Server Info:" -anchor w
|
pack .info.server.l -side left -padx {10 10}
|
pack .info.server.l -side left -padx {10 10}
|
label .info.server.con -text "Not running" -anchor w -fg Red
|
label .info.server.con -text "Not running" -anchor w -fg Red
|
pack .info.server.con -side left
|
pack .info.server.con -side left
|
|
|
|
|
# Create the text widget to log received messages
|
# Create the text widget to log received messages
|
frame .server.t
|
frame .server.t
|
pack .server.t -side top -padx 10 -pady 10 -fill x
|
pack .server.t -side top -padx 10 -pady 10 -fill x
|
set server(log) [text .server.t.log -width 80 -height 15 -borderwidth 2 \
|
set server(log) [text .server.t.log -width 80 -height 15 -borderwidth 2 \
|
-setgrid true -yscrollcommand {.server.t.scroll set}]
|
-setgrid true -yscrollcommand {.server.t.scroll set}]
|
pack .server.t.log -side left -fill both -expand true
|
pack .server.t.log -side left -fill both -expand true
|
scrollbar .server.t.scroll -command {.server.t.log yview}
|
scrollbar .server.t.scroll -command {.server.t.log yview}
|
pack .server.t.scroll -side right -fill both
|
pack .server.t.scroll -side right -fill both
|
|
|
|
|
# Log commands
|
# Log commands
|
frame .server.cmd
|
frame .server.cmd
|
pack .server.cmd -side top -pady {0 10} -fill x
|
pack .server.cmd -side top -pady {0 10} -fill x
|
button .server.cmd.clear -text "Clear log" -command {$server(log) delete 1.0 end}
|
button .server.cmd.clear -text "Clear log" -command {$server(log) delete 1.0 end}
|
pack .server.cmd.clear -side left -padx 10
|
pack .server.cmd.clear -side left -padx 10
|
checkbutton .server.cmd.verbose -text "Verbose" -variable verbose
|
checkbutton .server.cmd.verbose -text "Verbose" -variable verbose
|
pack .server.cmd.verbose -side right -padx 10
|
pack .server.cmd.verbose -side right -padx 10
|
|
|
|
|
# Load TCL script fields
|
# Load TCL script fields
|
frame .tclscript.ft
|
frame .tclscript.ft
|
pack .tclscript.ft -side top -padx 10 -pady 10 -fill x
|
pack .tclscript.ft -side top -padx 10 -pady 10 -fill x
|
label .tclscript.ft.l -text "TCL script:" -state disabled
|
label .tclscript.ft.l -text "TCL script:" -state disabled
|
pack .tclscript.ft.l -side left -padx "0 10"
|
pack .tclscript.ft.l -side left -padx "0 10"
|
entry .tclscript.ft.file -width 58 -relief sunken -textvariable tcl_file_name -state disabled
|
entry .tclscript.ft.file -width 58 -relief sunken -textvariable tcl_file_name -state disabled
|
pack .tclscript.ft.file -side left -padx 10
|
pack .tclscript.ft.file -side left -padx 10
|
button .tclscript.ft.browse -text "Browse" -state disabled -command {set tcl_file_name [tk_getOpenFile -filetypes {{{TCL Files} {.tcl}} {{All Files} *}}]}
|
button .tclscript.ft.browse -text "Browse" -state disabled -command {set tcl_file_name [tk_getOpenFile -filetypes {{{TCL Files} {.tcl}} {{All Files} *}}]}
|
pack .tclscript.ft.browse -side left -padx 5
|
pack .tclscript.ft.browse -side left -padx 5
|
frame .tclscript.fb
|
frame .tclscript.fb
|
pack .tclscript.fb -side top -fill x
|
pack .tclscript.fb -side top -fill x
|
button .tclscript.fb.read -text "Source TCL script !" -state disabled -command {if {[file exists $tcl_file_name]} {source $tcl_file_name}}
|
button .tclscript.fb.read -text "Source TCL script !" -state disabled -command {if {[file exists $tcl_file_name]} {source $tcl_file_name}}
|
pack .tclscript.fb.read -side left -padx 20 -pady {0 10} -fill x
|
pack .tclscript.fb.read -side left -padx 20 -pady {0 10} -fill x
|
|
|
wm resizable . 0 0
|
wm resizable . 0 0
|
|
|
|
|
|
|
#####################################
|
#####################################
|
# Breakpoint configuration window #
|
# Breakpoint configuration window #
|
#####################################
|
#####################################
|
|
|
proc configSoftBreakpoints { } {
|
proc configSoftBreakpoints { } {
|
|
|
global omsp_nr
|
global omsp_nr
|
|
|
# Destroy windows if already existing
|
# Destroy windows if already existing
|
if {[lsearch -exact [winfo children .] .omsp_sft_brk]!=-1} {
|
if {[lsearch -exact [winfo children .] .omsp_sft_brk]!=-1} {
|
destroy .omsp_sft_brk
|
destroy .omsp_sft_brk
|
}
|
}
|
|
|
# Create master window
|
# Create master window
|
set title "Software Breakpoint Configuration"
|
set title "Software Breakpoint Configuration"
|
toplevel .omsp_sft_brk
|
toplevel .omsp_sft_brk
|
wm title .omsp_sft_brk $title
|
wm title .omsp_sft_brk $title
|
wm geometry .omsp_sft_brk +380+200
|
wm geometry .omsp_sft_brk +380+200
|
wm resizable .omsp_sft_brk 0 0
|
wm resizable .omsp_sft_brk 0 0
|
|
|
# Title
|
# Title
|
label .omsp_sft_brk.title -text "$title" -anchor center -fg "\#6a5acd" -font {-weight bold -size 16}
|
label .omsp_sft_brk.title -text "$title" -anchor center -fg "\#6a5acd" -font {-weight bold -size 16}
|
pack .omsp_sft_brk.title -side top -padx {20 20} -pady {20 10}
|
pack .omsp_sft_brk.title -side top -padx {20 20} -pady {20 10}
|
|
|
# Create global frame
|
# Create global frame
|
frame .omsp_sft_brk.map
|
frame .omsp_sft_brk.map
|
pack .omsp_sft_brk.map -side top -padx {10 10} -pady {0 0}
|
pack .omsp_sft_brk.map -side top -padx {10 10} -pady {0 0}
|
|
|
# Create frame for buttons
|
# Create frame for buttons
|
frame .omsp_sft_brk.map.b -bd 2 -relief ridge
|
frame .omsp_sft_brk.map.b -bd 2 -relief ridge
|
pack .omsp_sft_brk.map.b -side top -padx 10 -pady {10 0} -fill x -expand true
|
pack .omsp_sft_brk.map.b -side top -padx 10 -pady {10 0} -fill x -expand true
|
|
|
button .omsp_sft_brk.map.b.share -text "Shared Program Memory" -command {setMemMapping 0 0 0 0}
|
button .omsp_sft_brk.map.b.share -text "Shared Program Memory" -command {setMemMapping 0 0 0 0}
|
pack .omsp_sft_brk.map.b.share -side left -padx {20 15} -pady {10 10}
|
pack .omsp_sft_brk.map.b.share -side left -padx {20 15} -pady {10 10}
|
|
|
button .omsp_sft_brk.map.b.dedic -text "Dedicated Program Memory" -command {setMemMapping 0 1 2 3}
|
button .omsp_sft_brk.map.b.dedic -text "Dedicated Program Memory" -command {setMemMapping 0 1 2 3}
|
pack .omsp_sft_brk.map.b.dedic -side right -padx {15 20} -pady {10 10}
|
pack .omsp_sft_brk.map.b.dedic -side right -padx {15 20} -pady {10 10}
|
|
|
|
|
# Create fram for radio-buttons
|
# Create fram for radio-buttons
|
frame .omsp_sft_brk.map.r -bd 2 -relief ridge
|
frame .omsp_sft_brk.map.r -bd 2 -relief ridge
|
pack .omsp_sft_brk.map.r -side top -padx 10 -pady {10 20} -fill x -expand true
|
pack .omsp_sft_brk.map.r -side top -padx 10 -pady {10 20} -fill x -expand true
|
|
|
frame .omsp_sft_brk.map.r.core_nr
|
frame .omsp_sft_brk.map.r.core_nr
|
pack .omsp_sft_brk.map.r.core_nr -side left -padx 5 -pady {0 20} -fill y
|
pack .omsp_sft_brk.map.r.core_nr -side left -padx 5 -pady {0 20} -fill y
|
label .omsp_sft_brk.map.r.core_nr.l3 -text "Core 3:" -anchor w
|
label .omsp_sft_brk.map.r.core_nr.l3 -text "Core 3:" -anchor w
|
pack .omsp_sft_brk.map.r.core_nr.l3 -side bottom -padx {25 0} -pady {10 10}
|
pack .omsp_sft_brk.map.r.core_nr.l3 -side bottom -padx {25 0} -pady {10 10}
|
label .omsp_sft_brk.map.r.core_nr.l2 -text "Core 2:" -anchor w
|
label .omsp_sft_brk.map.r.core_nr.l2 -text "Core 2:" -anchor w
|
pack .omsp_sft_brk.map.r.core_nr.l2 -side bottom -padx {25 0} -pady {10 2}
|
pack .omsp_sft_brk.map.r.core_nr.l2 -side bottom -padx {25 0} -pady {10 2}
|
label .omsp_sft_brk.map.r.core_nr.l1 -text "Core 1:" -anchor w
|
label .omsp_sft_brk.map.r.core_nr.l1 -text "Core 1:" -anchor w
|
pack .omsp_sft_brk.map.r.core_nr.l1 -side bottom -padx {25 0} -pady {10 2}
|
pack .omsp_sft_brk.map.r.core_nr.l1 -side bottom -padx {25 0} -pady {10 2}
|
label .omsp_sft_brk.map.r.core_nr.l0 -text "Core 0:" -anchor w
|
label .omsp_sft_brk.map.r.core_nr.l0 -text "Core 0:" -anchor w
|
pack .omsp_sft_brk.map.r.core_nr.l0 -side bottom -padx {25 0} -pady {10 2}
|
pack .omsp_sft_brk.map.r.core_nr.l0 -side bottom -padx {25 0} -pady {10 2}
|
|
|
frame .omsp_sft_brk.map.r.pmem0
|
frame .omsp_sft_brk.map.r.pmem0
|
pack .omsp_sft_brk.map.r.pmem0 -side left -padx 5 -pady {0 20} -fill y
|
pack .omsp_sft_brk.map.r.pmem0 -side left -padx 5 -pady {0 20} -fill y
|
radiobutton .omsp_sft_brk.map.r.pmem0.p3 -value "0" -text "" -state normal -variable mem_mapping(3)
|
radiobutton .omsp_sft_brk.map.r.pmem0.p3 -value "0" -text "" -state normal -variable mem_mapping(3)
|
pack .omsp_sft_brk.map.r.pmem0.p3 -side bottom -padx 5 -pady {10 10}
|
pack .omsp_sft_brk.map.r.pmem0.p3 -side bottom -padx 5 -pady {10 10}
|
radiobutton .omsp_sft_brk.map.r.pmem0.p2 -value "0" -text "" -state normal -variable mem_mapping(2)
|
radiobutton .omsp_sft_brk.map.r.pmem0.p2 -value "0" -text "" -state normal -variable mem_mapping(2)
|
pack .omsp_sft_brk.map.r.pmem0.p2 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem0.p2 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem0.p1 -value "0" -text "" -state normal -variable mem_mapping(1)
|
radiobutton .omsp_sft_brk.map.r.pmem0.p1 -value "0" -text "" -state normal -variable mem_mapping(1)
|
pack .omsp_sft_brk.map.r.pmem0.p1 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem0.p1 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem0.p0 -value "0" -text "" -state normal -variable mem_mapping(0)
|
radiobutton .omsp_sft_brk.map.r.pmem0.p0 -value "0" -text "" -state normal -variable mem_mapping(0)
|
pack .omsp_sft_brk.map.r.pmem0.p0 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem0.p0 -side bottom -padx 5 -pady {10 0}
|
label .omsp_sft_brk.map.r.pmem0.l -text "Program\nMemory 0" -anchor w
|
label .omsp_sft_brk.map.r.pmem0.l -text "Program\nMemory 0" -anchor w
|
pack .omsp_sft_brk.map.r.pmem0.l -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem0.l -side bottom -padx 5 -pady {10 0}
|
|
|
frame .omsp_sft_brk.map.r.pmem1
|
frame .omsp_sft_brk.map.r.pmem1
|
pack .omsp_sft_brk.map.r.pmem1 -side left -padx 5 -pady {0 20} -fill y
|
pack .omsp_sft_brk.map.r.pmem1 -side left -padx 5 -pady {0 20} -fill y
|
radiobutton .omsp_sft_brk.map.r.pmem1.p3 -value "1" -text "" -state normal -variable mem_mapping(3)
|
radiobutton .omsp_sft_brk.map.r.pmem1.p3 -value "1" -text "" -state normal -variable mem_mapping(3)
|
pack .omsp_sft_brk.map.r.pmem1.p3 -side bottom -padx 5 -pady {10 10}
|
pack .omsp_sft_brk.map.r.pmem1.p3 -side bottom -padx 5 -pady {10 10}
|
radiobutton .omsp_sft_brk.map.r.pmem1.p2 -value "1" -text "" -state normal -variable mem_mapping(2)
|
radiobutton .omsp_sft_brk.map.r.pmem1.p2 -value "1" -text "" -state normal -variable mem_mapping(2)
|
pack .omsp_sft_brk.map.r.pmem1.p2 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem1.p2 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem1.p1 -value "1" -text "" -state normal -variable mem_mapping(1)
|
radiobutton .omsp_sft_brk.map.r.pmem1.p1 -value "1" -text "" -state normal -variable mem_mapping(1)
|
pack .omsp_sft_brk.map.r.pmem1.p1 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem1.p1 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem1.p0 -value "1" -text "" -state disable -variable mem_mapping(0)
|
radiobutton .omsp_sft_brk.map.r.pmem1.p0 -value "1" -text "" -state disable -variable mem_mapping(0)
|
pack .omsp_sft_brk.map.r.pmem1.p0 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem1.p0 -side bottom -padx 5 -pady {10 0}
|
label .omsp_sft_brk.map.r.pmem1.l -text "Program\nMemory 1" -anchor w
|
label .omsp_sft_brk.map.r.pmem1.l -text "Program\nMemory 1" -anchor w
|
pack .omsp_sft_brk.map.r.pmem1.l -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem1.l -side bottom -padx 5 -pady {10 0}
|
|
|
frame .omsp_sft_brk.map.r.pmem2
|
frame .omsp_sft_brk.map.r.pmem2
|
pack .omsp_sft_brk.map.r.pmem2 -side left -padx 5 -pady {0 20} -fill y
|
pack .omsp_sft_brk.map.r.pmem2 -side left -padx 5 -pady {0 20} -fill y
|
radiobutton .omsp_sft_brk.map.r.pmem2.p3 -value "2" -text "" -state normal -variable mem_mapping(3)
|
radiobutton .omsp_sft_brk.map.r.pmem2.p3 -value "2" -text "" -state normal -variable mem_mapping(3)
|
pack .omsp_sft_brk.map.r.pmem2.p3 -side bottom -padx 5 -pady {10 10}
|
pack .omsp_sft_brk.map.r.pmem2.p3 -side bottom -padx 5 -pady {10 10}
|
radiobutton .omsp_sft_brk.map.r.pmem2.p2 -value "2" -text "" -state normal -variable mem_mapping(2)
|
radiobutton .omsp_sft_brk.map.r.pmem2.p2 -value "2" -text "" -state normal -variable mem_mapping(2)
|
pack .omsp_sft_brk.map.r.pmem2.p2 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem2.p2 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem2.p1 -value "2" -text "" -state disable -variable mem_mapping(1)
|
radiobutton .omsp_sft_brk.map.r.pmem2.p1 -value "2" -text "" -state disable -variable mem_mapping(1)
|
pack .omsp_sft_brk.map.r.pmem2.p1 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem2.p1 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem2.p0 -value "2" -text "" -state disable -variable mem_mapping(0)
|
radiobutton .omsp_sft_brk.map.r.pmem2.p0 -value "2" -text "" -state disable -variable mem_mapping(0)
|
pack .omsp_sft_brk.map.r.pmem2.p0 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem2.p0 -side bottom -padx 5 -pady {10 0}
|
label .omsp_sft_brk.map.r.pmem2.l -text "Program\nMemory 2" -anchor w
|
label .omsp_sft_brk.map.r.pmem2.l -text "Program\nMemory 2" -anchor w
|
pack .omsp_sft_brk.map.r.pmem2.l -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem2.l -side bottom -padx 5 -pady {10 0}
|
|
|
frame .omsp_sft_brk.map.r.pmem3
|
frame .omsp_sft_brk.map.r.pmem3
|
pack .omsp_sft_brk.map.r.pmem3 -side left -padx 5 -pady {0 20} -fill y
|
pack .omsp_sft_brk.map.r.pmem3 -side left -padx 5 -pady {0 20} -fill y
|
radiobutton .omsp_sft_brk.map.r.pmem3.p3 -value "3" -text "" -state normal -variable mem_mapping(3)
|
radiobutton .omsp_sft_brk.map.r.pmem3.p3 -value "3" -text "" -state normal -variable mem_mapping(3)
|
pack .omsp_sft_brk.map.r.pmem3.p3 -side bottom -padx 5 -pady {10 10}
|
pack .omsp_sft_brk.map.r.pmem3.p3 -side bottom -padx 5 -pady {10 10}
|
radiobutton .omsp_sft_brk.map.r.pmem3.p2 -value "3" -text "" -state disable -variable mem_mapping(2)
|
radiobutton .omsp_sft_brk.map.r.pmem3.p2 -value "3" -text "" -state disable -variable mem_mapping(2)
|
pack .omsp_sft_brk.map.r.pmem3.p2 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem3.p2 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem3.p1 -value "3" -text "" -state disable -variable mem_mapping(1)
|
radiobutton .omsp_sft_brk.map.r.pmem3.p1 -value "3" -text "" -state disable -variable mem_mapping(1)
|
pack .omsp_sft_brk.map.r.pmem3.p1 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem3.p1 -side bottom -padx 5 -pady {10 0}
|
radiobutton .omsp_sft_brk.map.r.pmem3.p0 -value "3" -text "" -state disable -variable mem_mapping(0)
|
radiobutton .omsp_sft_brk.map.r.pmem3.p0 -value "3" -text "" -state disable -variable mem_mapping(0)
|
pack .omsp_sft_brk.map.r.pmem3.p0 -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem3.p0 -side bottom -padx 5 -pady {10 0}
|
label .omsp_sft_brk.map.r.pmem3.l -text "Program\nMemory 3" -anchor w
|
label .omsp_sft_brk.map.r.pmem3.l -text "Program\nMemory 3" -anchor w
|
pack .omsp_sft_brk.map.r.pmem3.l -side bottom -padx 5 -pady {10 0}
|
pack .omsp_sft_brk.map.r.pmem3.l -side bottom -padx 5 -pady {10 0}
|
|
|
# Create OK button
|
# Create OK button
|
button .omsp_sft_brk.okay -text "OK" -font {-weight bold} -command {destroy .omsp_sft_brk}
|
button .omsp_sft_brk.okay -text "OK" -font {-weight bold} -command {destroy .omsp_sft_brk}
|
pack .omsp_sft_brk.okay -side bottom -expand true -fill x -padx 5 -pady {0 10}
|
pack .omsp_sft_brk.okay -side bottom -expand true -fill x -padx 5 -pady {0 10}
|
|
|
# Update according to number of cores
|
# Update according to number of cores
|
updateSoftBreakpoints
|
updateSoftBreakpoints
|
}
|
}
|
|
|
proc updateSoftBreakpoints { } {
|
proc updateSoftBreakpoints { } {
|
|
|
global omsp_nr
|
global omsp_nr
|
global breakSelect
|
global breakSelect
|
|
|
if {[winfo exists .omsp_sft_brk]} {
|
if {[winfo exists .omsp_sft_brk]} {
|
if {$breakSelect==0} {
|
if {$breakSelect==0} {
|
.omsp_sft_brk.map.r.core_nr.l0 configure -state normal
|
.omsp_sft_brk.map.r.core_nr.l0 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p0 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p0 configure -state normal
|
if {$omsp_nr < 2} {
|
if {$omsp_nr < 2} {
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state disabled
|
} else {
|
} else {
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state normal
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state normal
|
}
|
}
|
|
|
if {$omsp_nr < 3} {
|
if {$omsp_nr < 3} {
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state disabled
|
} else {
|
} else {
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state normal
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state normal
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state normal
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state normal
|
}
|
}
|
|
|
if {$omsp_nr < 4} {
|
if {$omsp_nr < 4} {
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state disabled
|
} else {
|
} else {
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state normal
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state normal
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state normal
|
}
|
}
|
} else {
|
} else {
|
.omsp_sft_brk.map.r.core_nr.l0 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l0 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p0 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p0 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p1 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p2 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state disabled
|
.omsp_sft_brk.map.r.core_nr.l3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem0.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem1.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem2.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state disabled
|
.omsp_sft_brk.map.r.pmem3.p3 configure -state disabled
|
}
|
}
|
}
|
}
|
}
|
}
|
|
|
proc setMemMapping {core0 core1 core2 core3} {
|
proc setMemMapping {core0 core1 core2 core3} {
|
|
|
global mem_mapping
|
global mem_mapping
|
global omsp_nr
|
global omsp_nr
|
|
|
set mem_mapping(0) $core0
|
set mem_mapping(0) $core0
|
if {$omsp_nr > 1} {
|
if {$omsp_nr > 1} {
|
set mem_mapping(1) $core1
|
set mem_mapping(1) $core1
|
}
|
}
|
if {$omsp_nr > 2} {
|
if {$omsp_nr > 2} {
|
set mem_mapping(2) $core2
|
set mem_mapping(2) $core2
|
}
|
}
|
if {$omsp_nr > 3} {
|
if {$omsp_nr > 3} {
|
set mem_mapping(3) $core3
|
set mem_mapping(3) $core3
|
}
|
}
|
}
|
}
|
|
|
