OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [gas/] [config/] [tc-hppa.h] - Diff between revs 156 and 816

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 156 Rev 816
/* tc-hppa.h -- Header file for the PA
/* tc-hppa.h -- Header file for the PA
   Copyright 1989, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002,
   Copyright 1989, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002,
   2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
   2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
 
 
   This file is part of GAS, the GNU Assembler.
   This file is part of GAS, the GNU Assembler.
 
 
   GAS is free software; you can redistribute it and/or modify
   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   the Free Software Foundation; either version 3, or (at your option)
   any later version.
   any later version.
 
 
   GAS is distributed in the hope that it will be useful,
   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   GNU General Public License for more details.
 
 
   You should have received a copy of the GNU General Public License
   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */
   02110-1301, USA.  */
 
 
/* HP PA-RISC support was contributed by the Center for Software Science
/* HP PA-RISC support was contributed by the Center for Software Science
   at the University of Utah.  */
   at the University of Utah.  */
 
 
/* Please refrain from exposing the world to the internals of tc-hppa.c
/* Please refrain from exposing the world to the internals of tc-hppa.c
   when this file is included.  This means only declaring exported functions,
   when this file is included.  This means only declaring exported functions,
   (please PARAMize them!) not exporting structures and data items which
   (please PARAMize them!) not exporting structures and data items which
   are used solely within tc-hppa.c, etc.
   are used solely within tc-hppa.c, etc.
 
 
   Also refrain from adding any more object file dependent code, there is
   Also refrain from adding any more object file dependent code, there is
   already far too much object file format dependent code in this file.
   already far too much object file format dependent code in this file.
   In theory this file should contain only exported functions, structures
   In theory this file should contain only exported functions, structures
   and data declarations common to all PA assemblers.  */
   and data declarations common to all PA assemblers.  */
 
 
#ifndef _TC_HPPA_H
#ifndef _TC_HPPA_H
#define _TC_HPPA_H
#define _TC_HPPA_H
 
 
#ifndef TC_HPPA
#ifndef TC_HPPA
#define TC_HPPA 1
#define TC_HPPA 1
#endif
#endif
 
 
#define TARGET_BYTES_BIG_ENDIAN 1
#define TARGET_BYTES_BIG_ENDIAN 1
 
 
#define TARGET_ARCH bfd_arch_hppa
#define TARGET_ARCH bfd_arch_hppa
 
 
#define WORKING_DOT_WORD
#define WORKING_DOT_WORD
 
 
#ifdef OBJ_ELF
#ifdef OBJ_ELF
#if TARGET_ARCH_SIZE == 64
#if TARGET_ARCH_SIZE == 64
#include "bfd/elf64-hppa.h"
#include "bfd/elf64-hppa.h"
#if defined (TE_LINUX) || defined (TE_NetBSD)
#if defined (TE_LINUX) || defined (TE_NetBSD)
#define TARGET_FORMAT "elf64-hppa-linux"
#define TARGET_FORMAT "elf64-hppa-linux"
#else
#else
#define TARGET_FORMAT "elf64-hppa"
#define TARGET_FORMAT "elf64-hppa"
#endif
#endif
#else /* TARGET_ARCH_SIZE == 32 */
#else /* TARGET_ARCH_SIZE == 32 */
#include "bfd/elf32-hppa.h"
#include "bfd/elf32-hppa.h"
#if defined (TE_LINUX)
#if defined (TE_LINUX)
#define TARGET_FORMAT "elf32-hppa-linux"
#define TARGET_FORMAT "elf32-hppa-linux"
#else
#else
#if defined (TE_NetBSD)
#if defined (TE_NetBSD)
#define TARGET_FORMAT "elf32-hppa-netbsd"
#define TARGET_FORMAT "elf32-hppa-netbsd"
#else
#else
#define TARGET_FORMAT "elf32-hppa"
#define TARGET_FORMAT "elf32-hppa"
#endif
#endif
#endif
#endif
#endif
#endif
#endif
#endif
 
 
#ifdef OBJ_SOM
#ifdef OBJ_SOM
#include "bfd/som.h"
#include "bfd/som.h"
#define TARGET_FORMAT "som"
#define TARGET_FORMAT "som"
#endif
#endif
 
 
#if defined(TE_LINUX) || defined(TE_NetBSD)
#if defined(TE_LINUX) || defined(TE_NetBSD)
/* Define to compile in an extra assembler option, -c, which enables a
/* Define to compile in an extra assembler option, -c, which enables a
   warning (once per file) when a comment is encountered.
   warning (once per file) when a comment is encountered.
   The hppa comment char is a `;' which tends to occur in random C asm
   The hppa comment char is a `;' which tends to occur in random C asm
   statements.  A semicolon is a line separator for most assemblers.
   statements.  A semicolon is a line separator for most assemblers.
   It's hard to find these lurking semicolons.  Thus...  */
   It's hard to find these lurking semicolons.  Thus...  */
#define WARN_COMMENTS 1
#define WARN_COMMENTS 1
#endif
#endif
 
 
/* FIXME.  Why oh why aren't these defined somewhere globally?  */
/* FIXME.  Why oh why aren't these defined somewhere globally?  */
#ifndef FALSE
#ifndef FALSE
#define FALSE   (0)
#define FALSE   (0)
#define TRUE    (!FALSE)
#define TRUE    (!FALSE)
#endif
#endif
 
 
#define ASEC_NULL (asection *)0
#define ASEC_NULL (asection *)0
 
 
/* pa_define_label gets used outside of tc-hppa.c via tc_frob_label.  */
/* pa_define_label gets used outside of tc-hppa.c via tc_frob_label.  */
extern void pa_define_label (symbolS *);
extern void pa_define_label (symbolS *);
extern void parse_cons_expression_hppa (expressionS *);
extern void parse_cons_expression_hppa (expressionS *);
extern void cons_fix_new_hppa (fragS *, int, int, expressionS *);
extern void cons_fix_new_hppa (fragS *, int, int, expressionS *);
extern int hppa_force_relocation (struct fix *);
extern int hppa_force_relocation (struct fix *);
 
 
/* This gets called before writing the object file to make sure
/* This gets called before writing the object file to make sure
   things like entry/exit and proc/procend pairs match.  */
   things like entry/exit and proc/procend pairs match.  */
extern void pa_check_eof (void);
extern void pa_check_eof (void);
#define tc_frob_file pa_check_eof
#define tc_frob_file pa_check_eof
 
 
#define tc_frob_label(sym) pa_define_label (sym)
#define tc_frob_label(sym) pa_define_label (sym)
 
 
extern const char       hppa_symbol_chars[];
extern const char       hppa_symbol_chars[];
#define tc_symbol_chars hppa_symbol_chars
#define tc_symbol_chars hppa_symbol_chars
 
 
#define RELOC_EXPANSION_POSSIBLE
#define RELOC_EXPANSION_POSSIBLE
#define MAX_RELOC_EXPANSION 6
#define MAX_RELOC_EXPANSION 6
 
 
/* The PA needs to parse field selectors in .byte, etc.  */
/* The PA needs to parse field selectors in .byte, etc.  */
 
 
#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) \
#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) \
  parse_cons_expression_hppa (EXP)
  parse_cons_expression_hppa (EXP)
#define TC_CONS_FIX_NEW cons_fix_new_hppa
#define TC_CONS_FIX_NEW cons_fix_new_hppa
 
 
/* On the PA, an exclamation point can appear in an instruction.  It is
/* On the PA, an exclamation point can appear in an instruction.  It is
   used in FP comparison instructions and as an end of line marker.
   used in FP comparison instructions and as an end of line marker.
   When used in an instruction it will always follow a comma.  */
   When used in an instruction it will always follow a comma.  */
#define TC_EOL_IN_INSN(PTR)     (*(PTR) == '!' && (PTR)[-1] == ',')
#define TC_EOL_IN_INSN(PTR)     (*(PTR) == '!' && (PTR)[-1] == ',')
 
 
int hppa_fix_adjustable (struct fix *);
int hppa_fix_adjustable (struct fix *);
#define tc_fix_adjustable hppa_fix_adjustable
#define tc_fix_adjustable hppa_fix_adjustable
 
 
#define EXTERN_FORCE_RELOC 1
#define EXTERN_FORCE_RELOC 1
 
 
/* Because of the strange PA calling conventions, it is sometimes
/* Because of the strange PA calling conventions, it is sometimes
   necessary to emit a relocation for a call even though it would
   necessary to emit a relocation for a call even though it would
   normally appear safe to handle it completely within GAS.  */
   normally appear safe to handle it completely within GAS.  */
#define TC_FORCE_RELOCATION(FIX) hppa_force_relocation (FIX)
#define TC_FORCE_RELOCATION(FIX) hppa_force_relocation (FIX)
 
 
/* Values passed to md_apply_fix don't include the symbol value.  */
/* Values passed to md_apply_fix don't include the symbol value.  */
#define MD_APPLY_SYM_VALUE(FIX) 0
#define MD_APPLY_SYM_VALUE(FIX) 0
 
 
#ifdef OBJ_SOM
#ifdef OBJ_SOM
/* If a symbol is imported, but never used, then the symbol should
/* If a symbol is imported, but never used, then the symbol should
   *not* end up in the symbol table.  Likewise for absolute symbols
   *not* end up in the symbol table.  Likewise for absolute symbols
   with local scope.  */
   with local scope.  */
#define tc_frob_symbol(sym,punt) \
#define tc_frob_symbol(sym,punt) \
    if ((S_GET_SEGMENT (sym) == &bfd_und_section && ! symbol_used_p (sym)) \
    if ((S_GET_SEGMENT (sym) == &bfd_und_section && ! symbol_used_p (sym)) \
        || (S_GET_SEGMENT (sym) == &bfd_abs_section \
        || (S_GET_SEGMENT (sym) == &bfd_abs_section \
            && ! S_IS_EXTERNAL (sym))) \
            && ! S_IS_EXTERNAL (sym))) \
      punt = 1
      punt = 1
 
 
/* We need to be able to make relocations involving the difference of
/* We need to be able to make relocations involving the difference of
   two symbols.  This includes the difference of two symbols when
   two symbols.  This includes the difference of two symbols when
   one of them is undefined (this comes up in PIC code generation).
   one of them is undefined (this comes up in PIC code generation).
 
 
   We don't define DIFF_EXPR_OK because it does the wrong thing if
   We don't define DIFF_EXPR_OK because it does the wrong thing if
   the add symbol is undefined and the sub symbol is a symbol in
   the add symbol is undefined and the sub symbol is a symbol in
   the same section as the relocation.  We also need some way to
   the same section as the relocation.  We also need some way to
   specialize some code in adjust_reloc_syms.  */
   specialize some code in adjust_reloc_syms.  */
#define UNDEFINED_DIFFERENCE_OK
#define UNDEFINED_DIFFERENCE_OK
#endif
#endif
 
 
#ifdef OBJ_ELF
#ifdef OBJ_ELF
#define DIFF_EXPR_OK 1
#define DIFF_EXPR_OK 1
 
 
/* Handle .type psuedo.  Given a type string of `millicode', set the
/* Handle .type psuedo.  Given a type string of `millicode', set the
   internal elf symbol type to STT_PARISC_MILLI, and return
   internal elf symbol type to STT_PARISC_MILLI, and return
   BSF_FUNCTION for the BFD symbol type.  */
   BSF_FUNCTION for the BFD symbol type.  */
#define md_elf_symbol_type(name, sym, elf)                              \
#define md_elf_symbol_type(name, sym, elf)                              \
  ((strcmp ((name), "millicode") == 0                                    \
  ((strcmp ((name), "millicode") == 0                                    \
    || strcmp ((name), "STT_PARISC_MILLI") == 0)                 \
    || strcmp ((name), "STT_PARISC_MILLI") == 0)                 \
   ? (((elf)->internal_elf_sym.st_info = ELF_ST_INFO                    \
   ? (((elf)->internal_elf_sym.st_info = ELF_ST_INFO                    \
       (ELF_ST_BIND ((elf)->internal_elf_sym.st_info), STT_PARISC_MILLI)\
       (ELF_ST_BIND ((elf)->internal_elf_sym.st_info), STT_PARISC_MILLI)\
       ), BSF_FUNCTION)                                                 \
       ), BSF_FUNCTION)                                                 \
   : -1)
   : -1)
 
 
#define tc_frob_symbol(sym,punt) \
#define tc_frob_symbol(sym,punt) \
  { \
  { \
    if ((S_GET_SEGMENT (sym) == &bfd_und_section \
    if ((S_GET_SEGMENT (sym) == &bfd_und_section \
         && ! symbol_used_p (sym) \
         && ! symbol_used_p (sym) \
         && ELF_ST_VISIBILITY (S_GET_OTHER (sym)) == STV_DEFAULT) \
         && ELF_ST_VISIBILITY (S_GET_OTHER (sym)) == STV_DEFAULT) \
        || (S_GET_SEGMENT (sym) == &bfd_abs_section \
        || (S_GET_SEGMENT (sym) == &bfd_abs_section \
            && ! S_IS_EXTERNAL (sym)) \
            && ! S_IS_EXTERNAL (sym)) \
        || strcmp (S_GET_NAME (sym), "$global$") == 0 \
        || strcmp (S_GET_NAME (sym), "$global$") == 0 \
        || strcmp (S_GET_NAME (sym), "$PIC_pcrel$0") == 0 \
        || strcmp (S_GET_NAME (sym), "$PIC_pcrel$0") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_gdidx$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_gdidx$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_ldidx$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_ldidx$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_dtpoff$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_dtpoff$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_ieoff$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_ieoff$") == 0 \
        || strcmp (S_GET_NAME (sym), "$tls_leoff$") == 0) \
        || strcmp (S_GET_NAME (sym), "$tls_leoff$") == 0) \
      punt = 1; \
      punt = 1; \
  }
  }
 
 
#define elf_tc_final_processing elf_hppa_final_processing
#define elf_tc_final_processing elf_hppa_final_processing
void elf_hppa_final_processing (void);
void elf_hppa_final_processing (void);
 
 
#define DWARF2_LINE_MIN_INSN_LENGTH 4
#define DWARF2_LINE_MIN_INSN_LENGTH 4
#endif /* OBJ_ELF */
#endif /* OBJ_ELF */
 
 
#define md_operand(x)
#define md_operand(x)
 
 
/* Allow register expressions to be treated as absolute expressions.
/* Allow register expressions to be treated as absolute expressions.
   A silly fudge required for backwards compatibility.  */
   A silly fudge required for backwards compatibility.  */
#define md_optimize_expr hppa_force_reg_syms_absolute
#define md_optimize_expr hppa_force_reg_syms_absolute
 
 
int hppa_force_reg_syms_absolute (expressionS *, operatorT, expressionS *);
int hppa_force_reg_syms_absolute (expressionS *, operatorT, expressionS *);
 
 
#define TC_FIX_TYPE PTR
#define TC_FIX_TYPE PTR
#define TC_INIT_FIX_DATA(FIX) ((FIX)->tc_fix_data = NULL)
#define TC_INIT_FIX_DATA(FIX) ((FIX)->tc_fix_data = NULL)
 
 
#ifdef OBJ_ELF
#ifdef OBJ_ELF
#define TARGET_USE_CFIPOP 1
#define TARGET_USE_CFIPOP 1
 
 
#define tc_cfi_frame_initial_instructions hppa_cfi_frame_initial_instructions
#define tc_cfi_frame_initial_instructions hppa_cfi_frame_initial_instructions
extern void hppa_cfi_frame_initial_instructions (void);
extern void hppa_cfi_frame_initial_instructions (void);
 
 
#define tc_regname_to_dw2regnum hppa_regname_to_dw2regnum
#define tc_regname_to_dw2regnum hppa_regname_to_dw2regnum
extern int hppa_regname_to_dw2regnum (char *regname);
extern int hppa_regname_to_dw2regnum (char *regname);
 
 
#define DWARF2_LINE_MIN_INSN_LENGTH 4
#define DWARF2_LINE_MIN_INSN_LENGTH 4
#define DWARF2_DEFAULT_RETURN_COLUMN 2
#define DWARF2_DEFAULT_RETURN_COLUMN 2
#if TARGET_ARCH_SIZE == 64
#if TARGET_ARCH_SIZE == 64
#define DWARF2_CIE_DATA_ALIGNMENT (-8)
#define DWARF2_CIE_DATA_ALIGNMENT (-8)
#else
#else
#define DWARF2_CIE_DATA_ALIGNMENT (-4)
#define DWARF2_CIE_DATA_ALIGNMENT (-4)
#endif
#endif
#endif
#endif
 
 
#endif /* _TC_HPPA_H */
#endif /* _TC_HPPA_H */
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.