OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [ld/] [scripttempl/] [elfxtensa.sc] - Diff between revs 156 and 816

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 156 Rev 816
#
#
# Unusual variables checked by this code:
# Unusual variables checked by this code:
#       NOP - four byte opcode for no-op (defaults to 0)
#       NOP - four byte opcode for no-op (defaults to 0)
#       NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#       NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#               empty.
#               empty.
#       SMALL_DATA_CTOR - .ctors contains small data.
#       SMALL_DATA_CTOR - .ctors contains small data.
#       SMALL_DATA_DTOR - .dtors contains small data.
#       SMALL_DATA_DTOR - .dtors contains small data.
#       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#       INITIAL_READONLY_SECTIONS - at start of text segment
#       INITIAL_READONLY_SECTIONS - at start of text segment
#       OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#       OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#               (e.g., .PARISC.milli)
#               (e.g., .PARISC.milli)
#       OTHER_TEXT_SECTIONS - these get put in .text when relocating
#       OTHER_TEXT_SECTIONS - these get put in .text when relocating
#       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#               (e.g., .PARISC.global)
#               (e.g., .PARISC.global)
#       OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
#       OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
#               (e.g. PPC32 .fixup, .got[12])
#               (e.g. PPC32 .fixup, .got[12])
#       OTHER_BSS_SECTIONS - other than .bss .sbss ...
#       OTHER_BSS_SECTIONS - other than .bss .sbss ...
#       ATTRS_SECTIONS - at the end
#       ATTRS_SECTIONS - at the end
#       OTHER_SECTIONS - at the end
#       OTHER_SECTIONS - at the end
#       EXECUTABLE_SYMBOLS - symbols that must be defined for an
#       EXECUTABLE_SYMBOLS - symbols that must be defined for an
#               executable (e.g., _DYNAMIC_LINK)
#               executable (e.g., _DYNAMIC_LINK)
#       TEXT_START_ADDR - the first byte of the text segment, after any
#       TEXT_START_ADDR - the first byte of the text segment, after any
#               headers.
#               headers.
#       TEXT_BASE_ADDRESS - the first byte of the text segment.
#       TEXT_BASE_ADDRESS - the first byte of the text segment.
#       TEXT_START_SYMBOLS - symbols that appear at the start of the
#       TEXT_START_SYMBOLS - symbols that appear at the start of the
#               .text section.
#               .text section.
#       DATA_START_SYMBOLS - symbols that appear at the start of the
#       DATA_START_SYMBOLS - symbols that appear at the start of the
#               .data section.
#               .data section.
#       DATA_END_SYMBOLS - symbols that appear at the end of the
#       DATA_END_SYMBOLS - symbols that appear at the end of the
#               writeable data sections.
#               writeable data sections.
#       OTHER_GOT_SYMBOLS - symbols defined just before .got.
#       OTHER_GOT_SYMBOLS - symbols defined just before .got.
#       OTHER_GOT_SECTIONS - sections just after .got.
#       OTHER_GOT_SECTIONS - sections just after .got.
#       OTHER_SDATA_SECTIONS - sections just after .sdata.
#       OTHER_SDATA_SECTIONS - sections just after .sdata.
#       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#               .bss section besides __bss_start.
#               .bss section besides __bss_start.
#       DATA_PLT - .plt should be in data segment, not text segment.
#       DATA_PLT - .plt should be in data segment, not text segment.
#       PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
#       PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
#       BSS_PLT - .plt should be in bss segment
#       BSS_PLT - .plt should be in bss segment
#       TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#       TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#       EMBEDDED - whether this is for an embedded system.
#       EMBEDDED - whether this is for an embedded system.
#       SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#       SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#               start address of shared library.
#               start address of shared library.
#       INPUT_FILES - INPUT command of files to always include
#       INPUT_FILES - INPUT command of files to always include
#       WRITABLE_RODATA - if set, the .rodata section should be writable
#       WRITABLE_RODATA - if set, the .rodata section should be writable
#       INIT_START, INIT_END -  statements just before and just after
#       INIT_START, INIT_END -  statements just before and just after
#       combination of .init sections.
#       combination of .init sections.
#       FINI_START, FINI_END - statements just before and just after
#       FINI_START, FINI_END - statements just before and just after
#       combination of .fini sections.
#       combination of .fini sections.
#       STACK_ADDR - start of a .stack section.
#       STACK_ADDR - start of a .stack section.
#       OTHER_SYMBOLS - symbols to place right at the end of the script.
#       OTHER_SYMBOLS - symbols to place right at the end of the script.
#       ETEXT_NAME - name of a symbol for the end of the text section,
#       ETEXT_NAME - name of a symbol for the end of the text section,
#               normally etext.
#               normally etext.
#       SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
#       SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
#               so that .got can be in the RELRO area.  It should be set to
#               so that .got can be in the RELRO area.  It should be set to
#               the number of bytes in the beginning of .got.plt which can be
#               the number of bytes in the beginning of .got.plt which can be
#               in the RELRO area as well.
#               in the RELRO area as well.
#       USER_LABEL_PREFIX - prefix to add to user-visible symbols.
#       USER_LABEL_PREFIX - prefix to add to user-visible symbols.
#
#
# When adding sections, do note that the names of some sections are used
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
# when specifying the start address of the next.
#
#
#  Many sections come in three flavours.  There is the 'real' section,
#  Many sections come in three flavours.  There is the 'real' section,
#  like ".data".  Then there are the per-procedure or per-variable
#  like ".data".  Then there are the per-procedure or per-variable
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  and useful for --gc-sections, which for a variable "foo" might be
#  and useful for --gc-sections, which for a variable "foo" might be
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  The exact correspondences are:
#  The exact correspondences are:
#
#
#  Section      Linkonce section
#  Section      Linkonce section
#  .text        .gnu.linkonce.t.foo
#  .text        .gnu.linkonce.t.foo
#  .rodata      .gnu.linkonce.r.foo
#  .rodata      .gnu.linkonce.r.foo
#  .data        .gnu.linkonce.d.foo
#  .data        .gnu.linkonce.d.foo
#  .bss         .gnu.linkonce.b.foo
#  .bss         .gnu.linkonce.b.foo
#  .sdata       .gnu.linkonce.s.foo
#  .sdata       .gnu.linkonce.s.foo
#  .sbss        .gnu.linkonce.sb.foo
#  .sbss        .gnu.linkonce.sb.foo
#  .sdata2      .gnu.linkonce.s2.foo
#  .sdata2      .gnu.linkonce.s2.foo
#  .sbss2       .gnu.linkonce.sb2.foo
#  .sbss2       .gnu.linkonce.sb2.foo
#  .debug_info  .gnu.linkonce.wi.foo
#  .debug_info  .gnu.linkonce.wi.foo
#  .tdata       .gnu.linkonce.td.foo
#  .tdata       .gnu.linkonce.td.foo
#  .tbss        .gnu.linkonce.tb.foo
#  .tbss        .gnu.linkonce.tb.foo
#  .lrodata     .gnu.linkonce.lr.foo
#  .lrodata     .gnu.linkonce.lr.foo
#  .ldata       .gnu.linkonce.l.foo
#  .ldata       .gnu.linkonce.l.foo
#  .lbss        .gnu.linkonce.lb.foo
#  .lbss        .gnu.linkonce.lb.foo
#
#
# plus exception-handling information for Tensilica's XCC compiler:
# plus exception-handling information for Tensilica's XCC compiler:
#  .xt_except_table .gnu.linkonce.e.foo
#  .xt_except_table .gnu.linkonce.e.foo
#  .xt_except_desc  .gnu.linkonce.h.foo
#  .xt_except_desc  .gnu.linkonce.h.foo
#
#
# plus Xtensa-specific literal sections:
# plus Xtensa-specific literal sections:
#  .literal     .gnu.linkonce.literal.foo
#  .literal     .gnu.linkonce.literal.foo
#  .lit4        .gnu.linkonce.lit4.foo
#  .lit4        .gnu.linkonce.lit4.foo
#
#
# plus Xtensa-specific "property table" sections:
# plus Xtensa-specific "property table" sections:
#  .xt.lit      .gnu.linkonce.p.foo
#  .xt.lit      .gnu.linkonce.p.foo
#  .xt.insn     .gnu.linkonce.x.foo (obsolete)
#  .xt.insn     .gnu.linkonce.x.foo (obsolete)
#  .xt.prop     .gnu.linkonce.prop.foo
#  .xt.prop     .gnu.linkonce.prop.foo
#
#
#  Each of these can also have corresponding .rel.* and .rela.* sections.
#  Each of these can also have corresponding .rel.* and .rela.* sections.
test -z "$ENTRY" && ENTRY=_start
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_END=""
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
if test -n "${COMMONPAGESIZE}"; then
  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
  DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
fi
if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
  INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
  INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
fi
fi
if test -z "$PLT"; then
if test -z "$PLT"; then
  PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
  PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
fi
fi
test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
if test -z "$GOT"; then
if test -z "$GOT"; then
  if test -z "$SEPARATE_GOTPLT"; then
  if test -z "$SEPARATE_GOTPLT"; then
    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
  else
  else
    GOT=".got          ${RELOCATING-0} : { *(.got) }"
    GOT=".got          ${RELOCATING-0} : { *(.got) }"
    GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
    GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
  fi
  fi
fi
fi
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
INIT_LIT=".init.literal 0 : { *(.init.literal)  }"
INIT_LIT=".init.literal 0 : { *(.init.literal)  }"
INIT=".init         0 : { *(.init)              }"
INIT=".init         0 : { *(.init)              }"
FINI_LIT=".fini.literal 0 : { *(.fini.literal)  }"
FINI_LIT=".fini.literal 0 : { *(.fini.literal)  }"
FINI=".fini         0 : { *(.fini)              }"
FINI=".fini         0 : { *(.fini)              }"
if test -z "${NO_SMALL_DATA}"; then
if test -z "${NO_SMALL_DATA}"; then
  SBSS=".sbss         ${RELOCATING-0} :
  SBSS=".sbss         ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${SBSS_START_SYMBOLS}}
    ${RELOCATING+${SBSS_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
    *(.dynsbss)
    *(.dynsbss)
    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
    *(.scommon)
    *(.scommon)
    ${RELOCATING+${SBSS_END_SYMBOLS}}
    ${RELOCATING+${SBSS_END_SYMBOLS}}
  }"
  }"
  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  SDATA="/* We want the small data sections together, so single-instruction offsets
  SDATA="/* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
     we can shorten the on-disk segment size.  */
  .sdata        ${RELOCATING-0} :
  .sdata        ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  }"
  }"
  SDATA2=".sdata2       ${RELOCATING-0} :
  SDATA2=".sdata2       ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${SDATA2_START_SYMBOLS}}
    ${RELOCATING+${SDATA2_START_SYMBOLS}}
    *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
    *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
  }"
  }"
  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
else
  NO_SMALL_DATA=" "
  NO_SMALL_DATA=" "
fi
fi
if test -z "${DATA_GOT}"; then
if test -z "${DATA_GOT}"; then
  if test -n "${NO_SMALL_DATA}"; then
  if test -n "${NO_SMALL_DATA}"; then
    DATA_GOT=" "
    DATA_GOT=" "
  fi
  fi
fi
fi
if test -z "${SDATA_GOT}"; then
if test -z "${SDATA_GOT}"; then
  if test -z "${NO_SMALL_DATA}"; then
  if test -z "${NO_SMALL_DATA}"; then
    SDATA_GOT=" "
    SDATA_GOT=" "
  fi
  fi
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
  ${OTHER_BSS_SECTIONS}
  ${OTHER_BSS_SECTIONS}
  .lbss ${RELOCATING-0} :
  .lbss ${RELOCATING-0} :
  {
  {
    *(.dynlbss)
    *(.dynlbss)
    *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
    *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
    *(LARGE_COMMON)
    *(LARGE_COMMON)
  }"
  }"
test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  {
  {
    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
  }
  }
  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  {
  {
    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
  }"
  }"
CTOR=".ctors        ${CONSTRUCTING-0} :
CTOR=".ctors        ${CONSTRUCTING-0} :
  {
  {
    ${CONSTRUCTING+${CTOR_START}}
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       doesn't matter which directory crtbegin.o
       is in.  */
       is in.  */
    KEEP (*crtbegin.o(.ctors))
    KEEP (*crtbegin.o(.ctors))
    KEEP (*crtbegin?.o(.ctors))
    KEEP (*crtbegin?.o(.ctors))
    /* We don't want to include the .ctor section from
    /* We don't want to include the .ctor section from
       the crtend.o file until after the sorted ctors.
       the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */
       end of ctors marker and it must be last */
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
    ${CONSTRUCTING+${CTOR_END}}
  }"
  }"
DTOR=".dtors        ${CONSTRUCTING-0} :
DTOR=".dtors        ${CONSTRUCTING-0} :
  {
  {
    ${CONSTRUCTING+${DTOR_START}}
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin.o(.dtors))
    KEEP (*crtbegin.o(.dtors))
    KEEP (*crtbegin?.o(.dtors))
    KEEP (*crtbegin?.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
    ${CONSTRUCTING+${DTOR_END}}
  }"
  }"
STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
  {
  {
    ${RELOCATING+_stack = .;}
    ${RELOCATING+_stack = .;}
    *(.stack)
    *(.stack)
  }"
  }"
# if this is for an embedded system, don't add SIZEOF_HEADERS.
# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi
fi
cat <
cat <
${RELOCATING+ENTRY(${ENTRY})}
${RELOCATING+ENTRY(${ENTRY})}
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}
  bug.  But for now assigning the zero vmas works.  */}
SECTIONS
SECTIONS
{
{
  /* Read-only sections, merged into text segment: */
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${INITIAL_READONLY_SECTIONS}
  ${INITIAL_READONLY_SECTIONS}
  .note.gnu.build-id : { *(.note.gnu.build-id) }
  .note.gnu.build-id : { *(.note.gnu.build-id) }
  ${TEXT_DYNAMIC+${DYNAMIC}}
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash         ${RELOCATING-0} : { *(.hash) }
  .hash         ${RELOCATING-0} : { *(.hash) }
  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
EOF
if [ "x$COMBRELOC" = x ]; then
if [ "x$COMBRELOC" = x ]; then
  COMBRELOCCAT=cat
  COMBRELOCCAT=cat
else
else
  COMBRELOCCAT="cat > $COMBRELOC"
  COMBRELOCCAT="cat > $COMBRELOC"
fi
fi
eval $COMBRELOCCAT <
eval $COMBRELOCCAT <
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
  ${OTHER_READONLY_RELOC_SECTIONS}
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  .rel.tdata    ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rel.tdata    ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rela.tdata   ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rela.tdata   ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rel.tbss     ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rel.tbss     ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rela.tbss    ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rela.tbss    ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  ${OTHER_GOT_RELOC_SECTIONS}
  ${OTHER_GOT_RELOC_SECTIONS}
  ${REL_SDATA}
  ${REL_SDATA}
  ${REL_SBSS}
  ${REL_SBSS}
  ${REL_SDATA2}
  ${REL_SDATA2}
  ${REL_SBSS2}
  ${REL_SBSS2}
  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
  ${REL_LARGE}
  ${REL_LARGE}
EOF
EOF
if [ -n "$COMBRELOC" ]; then
if [ -n "$COMBRELOC" ]; then
cat <
cat <
  .rel.dyn      ${RELOCATING-0} :
  .rel.dyn      ${RELOCATING-0} :
    {
    {
EOF
EOF
sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
cat <
cat <
    }
    }
  .rela.dyn     ${RELOCATING-0} :
  .rela.dyn     ${RELOCATING-0} :
    {
    {
EOF
EOF
sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
cat <
cat <
    }
    }
EOF
EOF
fi
fi
cat <
cat <
  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
  ${OTHER_PLT_RELOC_SECTIONS}
  ${OTHER_PLT_RELOC_SECTIONS}
  ${RELOCATING-$INIT_LIT}
  ${RELOCATING-$INIT_LIT}
  ${RELOCATING-$INIT}
  ${RELOCATING-$INIT}
  ${TEXT_PLT+${PLT}}
  ${TEXT_PLT+${PLT}}
  ${TINY_READONLY_SECTION}
  ${TINY_READONLY_SECTION}
  .text         ${RELOCATING-0} :
  .text         ${RELOCATING-0} :
  {
  {
    *(.got.plt* .plt*)
    *(.got.plt* .plt*)
    ${RELOCATING+${INIT_START}}
    ${RELOCATING+${INIT_START}}
    ${RELOCATING+KEEP (*(.init.literal))}
    ${RELOCATING+KEEP (*(.init.literal))}
    ${RELOCATING+KEEP (*(.init))}
    ${RELOCATING+KEEP (*(.init))}
    ${RELOCATING+${INIT_END}}
    ${RELOCATING+${INIT_END}}
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
    *(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
    /* .gnu.warning sections are handled specially by elf32.em.  */
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    *(.gnu.warning)
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
    ${RELOCATING+${FINI_START}}
    ${RELOCATING+${FINI_START}}
    ${RELOCATING+KEEP (*(.fini.literal))}
    ${RELOCATING+KEEP (*(.fini.literal))}
    ${RELOCATING+KEEP (*(.fini))}
    ${RELOCATING+KEEP (*(.fini))}
    ${RELOCATING+${FINI_END}}
    ${RELOCATING+${FINI_END}}
  } =${NOP-0}
  } =${NOP-0}
  ${RELOCATING-$FINI_LIT}
  ${RELOCATING-$FINI_LIT}
  ${RELOCATING-$FINI}
  ${RELOCATING-$FINI}
  ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
  ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
  ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
  ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
  ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
  ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
  ${WRITABLE_RODATA-${RODATA}}
  ${WRITABLE_RODATA-${RODATA}}
  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${OTHER_READONLY_SECTIONS}
  ${OTHER_READONLY_SECTIONS}
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
  /* Adjust the address for the data segment.  We want to adjust up to
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  /* Exception handling  */
  /* Exception handling  */
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
  /* Thread Local Storage sections  */
  /* Thread Local Storage sections  */
  .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
  .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
  .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
  .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
  .preinit_array   ${RELOCATING-0} :
  .preinit_array   ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
    KEEP (*(.preinit_array))
    KEEP (*(.preinit_array))
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
  }
  }
  .init_array   ${RELOCATING-0} :
  .init_array   ${RELOCATING-0} :
  {
  {
     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
     KEEP (*(SORT(.init_array.*)))
     KEEP (*(SORT(.init_array.*)))
     KEEP (*(.init_array))
     KEEP (*(.init_array))
     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
  }
  }
  .fini_array   ${RELOCATING-0} :
  .fini_array   ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
    KEEP (*(.fini_array))
    KEEP (*(.fini_array))
    KEEP (*(SORT(.fini_array.*)))
    KEEP (*(SORT(.fini_array.*)))
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
  }
  }
  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
  ${RELOCATING+${DATARELRO}}
  ${RELOCATING+${DATARELRO}}
  ${OTHER_RELRO_SECTIONS}
  ${OTHER_RELRO_SECTIONS}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${DATA_GOT+${RELRO_NOW+${GOT}}}
  ${DATA_GOT+${RELRO_NOW+${GOT}}}
  ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
  ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
  ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
  ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
  .data         ${RELOCATING-0} :
  .data         ${RELOCATING-0} :
  {
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }
  }
  .data1        ${RELOCATING-0} : { *(.data1) }
  .data1        ${RELOCATING-0} : { *(.data1) }
  ${WRITABLE_RODATA+${RODATA}}
  ${WRITABLE_RODATA+${RODATA}}
  ${OTHER_READWRITE_SECTIONS}
  ${OTHER_READWRITE_SECTIONS}
  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
  ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
  ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
  ${SDATA_GOT+${GOT}}
  ${SDATA_GOT+${GOT}}
  ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
  ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
  ${SDATA}
  ${SDATA}
  ${OTHER_SDATA_SECTIONS}
  ${OTHER_SDATA_SECTIONS}
  ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
  ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  ${SBSS}
  ${SBSS}
  ${BSS_PLT+${PLT}}
  ${BSS_PLT+${PLT}}
  .bss          ${RELOCATING-0} :
  .bss          ${RELOCATING-0} :
  {
  {
   *(.dynbss)
   *(.dynbss)
   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
   *(COMMON)
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.
      .bss section disappears because there are no input sections.
      FIXME: Why do we need it? When there is no .bss section, we don't
      FIXME: Why do we need it? When there is no .bss section, we don't
      pad the .data section.  */
      pad the .data section.  */
   ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
   ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
  }
  }
  ${OTHER_BSS_SECTIONS}
  ${OTHER_BSS_SECTIONS}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${LARGE_SECTIONS}
  ${LARGE_SECTIONS}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+${OTHER_END_SYMBOLS}}
  ${RELOCATING+${OTHER_END_SYMBOLS}}
  ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
  ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
  ${RELOCATING+${DATA_SEGMENT_END}}
  ${RELOCATING+${DATA_SEGMENT_END}}
  /* Stabs debugging sections.  */
  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment       0 : { *(.comment) }
  .comment       0 : { *(.comment) }
  /* DWARF debug sections.
  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
     of the section so we begin them at 0.  */
  /* DWARF 1 */
  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  .line           0 : { *(.line) }
  /* GNU DWARF 1 extensions */
  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  /* DWARF 1.1 and DWARF 2 */
  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  /* DWARF 2 */
  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
  .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  /* SGI/MIPS DWARF 2 extensions */
  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  /* DWARF 3 */
  /* DWARF 3 */
  .debug_pubtypes 0 : { *(.debug_pubtypes) }
  .debug_pubtypes 0 : { *(.debug_pubtypes) }
  .debug_ranges   0 : { *(.debug_ranges) }
  .debug_ranges   0 : { *(.debug_ranges) }
  ${TINY_DATA_SECTION}
  ${TINY_DATA_SECTION}
  ${TINY_BSS_SECTION}
  ${TINY_BSS_SECTION}
  ${STACK_ADDR+${STACK}}
  ${STACK_ADDR+${STACK}}
  ${ATTRS_SECTIONS}
  ${ATTRS_SECTIONS}
  ${OTHER_SECTIONS}
  ${OTHER_SECTIONS}
  ${RELOCATING+${OTHER_SYMBOLS}}
  ${RELOCATING+${OTHER_SYMBOLS}}
  ${RELOCATING+${DISCARDED}}
  ${RELOCATING+${DISCARDED}}
}
}
EOF
EOF
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.