;; ARM 1020E & ARM 1022E Pipeline Description
|
;; ARM 1020E & ARM 1022E Pipeline Description
|
;; Copyright (C) 2005, 2007 Free Software Foundation, Inc.
|
;; Copyright (C) 2005, 2007 Free Software Foundation, Inc.
|
;; Contributed by Richard Earnshaw (richard.earnshaw@arm.com)
|
;; Contributed by Richard Earnshaw (richard.earnshaw@arm.com)
|
;;
|
;;
|
;; This file is part of GCC.
|
;; This file is part of GCC.
|
;;
|
;;
|
;; GCC is free software; you can redistribute it and/or modify it
|
;; GCC is free software; you can redistribute it and/or modify it
|
;; under the terms of the GNU General Public License as published by
|
;; under the terms of the GNU General Public License as published by
|
;; the Free Software Foundation; either version 3, or (at your option)
|
;; the Free Software Foundation; either version 3, or (at your option)
|
;; any later version.
|
;; any later version.
|
;;
|
;;
|
;; GCC is distributed in the hope that it will be useful, but
|
;; GCC is distributed in the hope that it will be useful, but
|
;; WITHOUT ANY WARRANTY; without even the implied warranty of
|
;; WITHOUT ANY WARRANTY; without even the implied warranty of
|
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
;; General Public License for more details.
|
;; General Public License for more details.
|
;;
|
;;
|
;; You should have received a copy of the GNU General Public License
|
;; You should have received a copy of the GNU General Public License
|
;; along with GCC; see the file COPYING3. If not see
|
;; along with GCC; see the file COPYING3. If not see
|
;; . */
|
;; . */
|
|
|
;; These descriptions are based on the information contained in the
|
;; These descriptions are based on the information contained in the
|
;; ARM1020E Technical Reference Manual, Copyright (c) 2003 ARM
|
;; ARM1020E Technical Reference Manual, Copyright (c) 2003 ARM
|
;; Limited.
|
;; Limited.
|
;;
|
;;
|
|
|
;; This automaton provides a pipeline description for the ARM
|
;; This automaton provides a pipeline description for the ARM
|
;; 1020E core.
|
;; 1020E core.
|
;;
|
;;
|
;; The model given here assumes that the condition for all conditional
|
;; The model given here assumes that the condition for all conditional
|
;; instructions is "true", i.e., that all of the instructions are
|
;; instructions is "true", i.e., that all of the instructions are
|
;; actually executed.
|
;; actually executed.
|
|
|
(define_automaton "arm1020e")
|
(define_automaton "arm1020e")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; Pipelines
|
;; Pipelines
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
;; There are two pipelines:
|
;; There are two pipelines:
|
;;
|
;;
|
;; - An Arithmetic Logic Unit (ALU) pipeline.
|
;; - An Arithmetic Logic Unit (ALU) pipeline.
|
;;
|
;;
|
;; The ALU pipeline has fetch, issue, decode, execute, memory, and
|
;; The ALU pipeline has fetch, issue, decode, execute, memory, and
|
;; write stages. We only need to model the execute, memory and write
|
;; write stages. We only need to model the execute, memory and write
|
;; stages.
|
;; stages.
|
;;
|
;;
|
;; - A Load-Store Unit (LSU) pipeline.
|
;; - A Load-Store Unit (LSU) pipeline.
|
;;
|
;;
|
;; The LSU pipeline has decode, execute, memory, and write stages.
|
;; The LSU pipeline has decode, execute, memory, and write stages.
|
;; We only model the execute, memory and write stages.
|
;; We only model the execute, memory and write stages.
|
|
|
(define_cpu_unit "1020a_e,1020a_m,1020a_w" "arm1020e")
|
(define_cpu_unit "1020a_e,1020a_m,1020a_w" "arm1020e")
|
(define_cpu_unit "1020l_e,1020l_m,1020l_w" "arm1020e")
|
(define_cpu_unit "1020l_e,1020l_m,1020l_w" "arm1020e")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; ALU Instructions
|
;; ALU Instructions
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
;; ALU instructions require three cycles to execute, and use the ALU
|
;; ALU instructions require three cycles to execute, and use the ALU
|
;; pipeline in each of the three stages. The results are available
|
;; pipeline in each of the three stages. The results are available
|
;; after the execute stage stage has finished.
|
;; after the execute stage stage has finished.
|
;;
|
;;
|
;; If the destination register is the PC, the pipelines are stalled
|
;; If the destination register is the PC, the pipelines are stalled
|
;; for several cycles. That case is not modeled here.
|
;; for several cycles. That case is not modeled here.
|
|
|
;; ALU operations with no shifted operand
|
;; ALU operations with no shifted operand
|
(define_insn_reservation "1020alu_op" 1
|
(define_insn_reservation "1020alu_op" 1
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "alu"))
|
(eq_attr "type" "alu"))
|
"1020a_e,1020a_m,1020a_w")
|
"1020a_e,1020a_m,1020a_w")
|
|
|
;; ALU operations with a shift-by-constant operand
|
;; ALU operations with a shift-by-constant operand
|
(define_insn_reservation "1020alu_shift_op" 1
|
(define_insn_reservation "1020alu_shift_op" 1
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "alu_shift"))
|
(eq_attr "type" "alu_shift"))
|
"1020a_e,1020a_m,1020a_w")
|
"1020a_e,1020a_m,1020a_w")
|
|
|
;; ALU operations with a shift-by-register operand
|
;; ALU operations with a shift-by-register operand
|
;; These really stall in the decoder, in order to read
|
;; These really stall in the decoder, in order to read
|
;; the shift value in a second cycle. Pretend we take two cycles in
|
;; the shift value in a second cycle. Pretend we take two cycles in
|
;; the execute stage.
|
;; the execute stage.
|
(define_insn_reservation "1020alu_shift_reg_op" 2
|
(define_insn_reservation "1020alu_shift_reg_op" 2
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "alu_shift_reg"))
|
(eq_attr "type" "alu_shift_reg"))
|
"1020a_e*2,1020a_m,1020a_w")
|
"1020a_e*2,1020a_m,1020a_w")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; Multiplication Instructions
|
;; Multiplication Instructions
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
;; Multiplication instructions loop in the execute stage until the
|
;; Multiplication instructions loop in the execute stage until the
|
;; instruction has been passed through the multiplier array enough
|
;; instruction has been passed through the multiplier array enough
|
;; times.
|
;; times.
|
|
|
;; The result of the "smul" and "smulw" instructions is not available
|
;; The result of the "smul" and "smulw" instructions is not available
|
;; until after the memory stage.
|
;; until after the memory stage.
|
(define_insn_reservation "1020mult1" 2
|
(define_insn_reservation "1020mult1" 2
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "smulxy,smulwy"))
|
(eq_attr "insn" "smulxy,smulwy"))
|
"1020a_e,1020a_m,1020a_w")
|
"1020a_e,1020a_m,1020a_w")
|
|
|
;; The "smlaxy" and "smlawx" instructions require two iterations through
|
;; The "smlaxy" and "smlawx" instructions require two iterations through
|
;; the execute stage; the result is available immediately following
|
;; the execute stage; the result is available immediately following
|
;; the execute stage.
|
;; the execute stage.
|
(define_insn_reservation "1020mult2" 2
|
(define_insn_reservation "1020mult2" 2
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "smlaxy,smlalxy,smlawx"))
|
(eq_attr "insn" "smlaxy,smlalxy,smlawx"))
|
"1020a_e*2,1020a_m,1020a_w")
|
"1020a_e*2,1020a_m,1020a_w")
|
|
|
;; The "smlalxy", "mul", and "mla" instructions require two iterations
|
;; The "smlalxy", "mul", and "mla" instructions require two iterations
|
;; through the execute stage; the result is not available until after
|
;; through the execute stage; the result is not available until after
|
;; the memory stage.
|
;; the memory stage.
|
(define_insn_reservation "1020mult3" 3
|
(define_insn_reservation "1020mult3" 3
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "smlalxy,mul,mla"))
|
(eq_attr "insn" "smlalxy,mul,mla"))
|
"1020a_e*2,1020a_m,1020a_w")
|
"1020a_e*2,1020a_m,1020a_w")
|
|
|
;; The "muls" and "mlas" instructions loop in the execute stage for
|
;; The "muls" and "mlas" instructions loop in the execute stage for
|
;; four iterations in order to set the flags. The value result is
|
;; four iterations in order to set the flags. The value result is
|
;; available after three iterations.
|
;; available after three iterations.
|
(define_insn_reservation "1020mult4" 3
|
(define_insn_reservation "1020mult4" 3
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "muls,mlas"))
|
(eq_attr "insn" "muls,mlas"))
|
"1020a_e*4,1020a_m,1020a_w")
|
"1020a_e*4,1020a_m,1020a_w")
|
|
|
;; Long multiply instructions that produce two registers of
|
;; Long multiply instructions that produce two registers of
|
;; output (such as umull) make their results available in two cycles;
|
;; output (such as umull) make their results available in two cycles;
|
;; the least significant word is available before the most significant
|
;; the least significant word is available before the most significant
|
;; word. That fact is not modeled; instead, the instructions are
|
;; word. That fact is not modeled; instead, the instructions are
|
;; described.as if the entire result was available at the end of the
|
;; described.as if the entire result was available at the end of the
|
;; cycle in which both words are available.
|
;; cycle in which both words are available.
|
|
|
;; The "umull", "umlal", "smull", and "smlal" instructions all take
|
;; The "umull", "umlal", "smull", and "smlal" instructions all take
|
;; three iterations through the execute cycle, and make their results
|
;; three iterations through the execute cycle, and make their results
|
;; available after the memory cycle.
|
;; available after the memory cycle.
|
(define_insn_reservation "1020mult5" 4
|
(define_insn_reservation "1020mult5" 4
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "umull,umlal,smull,smlal"))
|
(eq_attr "insn" "umull,umlal,smull,smlal"))
|
"1020a_e*3,1020a_m,1020a_w")
|
"1020a_e*3,1020a_m,1020a_w")
|
|
|
;; The "umulls", "umlals", "smulls", and "smlals" instructions loop in
|
;; The "umulls", "umlals", "smulls", and "smlals" instructions loop in
|
;; the execute stage for five iterations in order to set the flags.
|
;; the execute stage for five iterations in order to set the flags.
|
;; The value result is available after four iterations.
|
;; The value result is available after four iterations.
|
(define_insn_reservation "1020mult6" 4
|
(define_insn_reservation "1020mult6" 4
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "insn" "umulls,umlals,smulls,smlals"))
|
(eq_attr "insn" "umulls,umlals,smulls,smlals"))
|
"1020a_e*5,1020a_m,1020a_w")
|
"1020a_e*5,1020a_m,1020a_w")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; Load/Store Instructions
|
;; Load/Store Instructions
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
;; The models for load/store instructions do not accurately describe
|
;; The models for load/store instructions do not accurately describe
|
;; the difference between operations with a base register writeback
|
;; the difference between operations with a base register writeback
|
;; (such as "ldm!"). These models assume that all memory references
|
;; (such as "ldm!"). These models assume that all memory references
|
;; hit in dcache.
|
;; hit in dcache.
|
|
|
;; LSU instructions require six cycles to execute. They use the ALU
|
;; LSU instructions require six cycles to execute. They use the ALU
|
;; pipeline in all but the 5th cycle, and the LSU pipeline in cycles
|
;; pipeline in all but the 5th cycle, and the LSU pipeline in cycles
|
;; three through six.
|
;; three through six.
|
;; Loads and stores which use a scaled register offset or scaled
|
;; Loads and stores which use a scaled register offset or scaled
|
;; register pre-indexed addressing mode take three cycles EXCEPT for
|
;; register pre-indexed addressing mode take three cycles EXCEPT for
|
;; those that are base + offset with LSL of 0 or 2, or base - offset
|
;; those that are base + offset with LSL of 0 or 2, or base - offset
|
;; with LSL of zero. The remainder take 1 cycle to execute.
|
;; with LSL of zero. The remainder take 1 cycle to execute.
|
;; For 4byte loads there is a bypass from the load stage
|
;; For 4byte loads there is a bypass from the load stage
|
|
|
(define_insn_reservation "1020load1_op" 2
|
(define_insn_reservation "1020load1_op" 2
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "load_byte,load1"))
|
(eq_attr "type" "load_byte,load1"))
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
(define_insn_reservation "1020store1_op" 0
|
(define_insn_reservation "1020store1_op" 0
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "store1"))
|
(eq_attr "type" "store1"))
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
;; A load's result can be stored by an immediately following store
|
;; A load's result can be stored by an immediately following store
|
(define_bypass 1 "1020load1_op" "1020store1_op" "arm_no_early_store_addr_dep")
|
(define_bypass 1 "1020load1_op" "1020store1_op" "arm_no_early_store_addr_dep")
|
|
|
;; On a LDM/STM operation, the LSU pipeline iterates until all of the
|
;; On a LDM/STM operation, the LSU pipeline iterates until all of the
|
;; registers have been processed.
|
;; registers have been processed.
|
;;
|
;;
|
;; The time it takes to load the data depends on whether or not the
|
;; The time it takes to load the data depends on whether or not the
|
;; base address is 64-bit aligned; if it is not, an additional cycle
|
;; base address is 64-bit aligned; if it is not, an additional cycle
|
;; is required. This model assumes that the address is always 64-bit
|
;; is required. This model assumes that the address is always 64-bit
|
;; aligned. Because the processor can load two registers per cycle,
|
;; aligned. Because the processor can load two registers per cycle,
|
;; that assumption means that we use the same instruction reservations
|
;; that assumption means that we use the same instruction reservations
|
;; for loading 2k and 2k - 1 registers.
|
;; for loading 2k and 2k - 1 registers.
|
;;
|
;;
|
;; The ALU pipeline is decoupled after the first cycle unless there is
|
;; The ALU pipeline is decoupled after the first cycle unless there is
|
;; a register dependency; the dependency is cleared as soon as the LDM/STM
|
;; a register dependency; the dependency is cleared as soon as the LDM/STM
|
;; has dealt with the corresponding register. So for example,
|
;; has dealt with the corresponding register. So for example,
|
;; stmia sp, {r0-r3}
|
;; stmia sp, {r0-r3}
|
;; add r0, r0, #4
|
;; add r0, r0, #4
|
;; will have one fewer stalls than
|
;; will have one fewer stalls than
|
;; stmia sp, {r0-r3}
|
;; stmia sp, {r0-r3}
|
;; add r3, r3, #4
|
;; add r3, r3, #4
|
;;
|
;;
|
;; As with ALU operations, if one of the destination registers is the
|
;; As with ALU operations, if one of the destination registers is the
|
;; PC, there are additional stalls; that is not modeled.
|
;; PC, there are additional stalls; that is not modeled.
|
|
|
(define_insn_reservation "1020load2_op" 2
|
(define_insn_reservation "1020load2_op" 2
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "load2"))
|
(eq_attr "type" "load2"))
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
(define_insn_reservation "1020store2_op" 0
|
(define_insn_reservation "1020store2_op" 0
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "store2"))
|
(eq_attr "type" "store2"))
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
(define_insn_reservation "1020load34_op" 3
|
(define_insn_reservation "1020load34_op" 3
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "load3,load4"))
|
(eq_attr "type" "load3,load4"))
|
"1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")
|
|
|
(define_insn_reservation "1020store34_op" 0
|
(define_insn_reservation "1020store34_op" 0
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "store3,store4"))
|
(eq_attr "type" "store3,store4"))
|
"1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_e+1020l_m,1020l_m,1020l_w")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; Branch and Call Instructions
|
;; Branch and Call Instructions
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
;; Branch instructions are difficult to model accurately. The ARM
|
;; Branch instructions are difficult to model accurately. The ARM
|
;; core can predict most branches. If the branch is predicted
|
;; core can predict most branches. If the branch is predicted
|
;; correctly, and predicted early enough, the branch can be completely
|
;; correctly, and predicted early enough, the branch can be completely
|
;; eliminated from the instruction stream. Some branches can
|
;; eliminated from the instruction stream. Some branches can
|
;; therefore appear to require zero cycles to execute. We assume that
|
;; therefore appear to require zero cycles to execute. We assume that
|
;; all branches are predicted correctly, and that the latency is
|
;; all branches are predicted correctly, and that the latency is
|
;; therefore the minimum value.
|
;; therefore the minimum value.
|
|
|
(define_insn_reservation "1020branch_op" 0
|
(define_insn_reservation "1020branch_op" 0
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "branch"))
|
(eq_attr "type" "branch"))
|
"1020a_e")
|
"1020a_e")
|
|
|
;; The latency for a call is not predictable. Therefore, we use 32 as
|
;; The latency for a call is not predictable. Therefore, we use 32 as
|
;; roughly equivalent to positive infinity.
|
;; roughly equivalent to positive infinity.
|
|
|
(define_insn_reservation "1020call_op" 32
|
(define_insn_reservation "1020call_op" 32
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "type" "call"))
|
(eq_attr "type" "call"))
|
"1020a_e*32")
|
"1020a_e*32")
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;; VFP
|
;; VFP
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
(define_cpu_unit "v10_fmac" "arm1020e")
|
(define_cpu_unit "v10_fmac" "arm1020e")
|
|
|
(define_cpu_unit "v10_ds" "arm1020e")
|
(define_cpu_unit "v10_ds" "arm1020e")
|
|
|
(define_cpu_unit "v10_fmstat" "arm1020e")
|
(define_cpu_unit "v10_fmstat" "arm1020e")
|
|
|
(define_cpu_unit "v10_ls1,v10_ls2,v10_ls3" "arm1020e")
|
(define_cpu_unit "v10_ls1,v10_ls2,v10_ls3" "arm1020e")
|
|
|
;; fmstat is a serializing instruction. It will stall the core until
|
;; fmstat is a serializing instruction. It will stall the core until
|
;; the mac and ds units have completed.
|
;; the mac and ds units have completed.
|
(exclusion_set "v10_fmac,v10_ds" "v10_fmstat")
|
(exclusion_set "v10_fmac,v10_ds" "v10_fmstat")
|
|
|
(define_attr "vfp10" "yes,no"
|
(define_attr "vfp10" "yes,no"
|
(const (if_then_else (and (eq_attr "tune" "arm1020e,arm1022e")
|
(const (if_then_else (and (eq_attr "tune" "arm1020e,arm1022e")
|
(eq_attr "fpu" "vfp"))
|
(eq_attr "fpu" "vfp"))
|
(const_string "yes") (const_string "no"))))
|
(const_string "yes") (const_string "no"))))
|
|
|
;; The VFP "type" attributes differ from those used in the FPA model.
|
;; The VFP "type" attributes differ from those used in the FPA model.
|
;; ffarith Fast floating point insns, e.g. abs, neg, cpy, cmp.
|
;; ffarith Fast floating point insns, e.g. abs, neg, cpy, cmp.
|
;; farith Most arithmetic insns.
|
;; farith Most arithmetic insns.
|
;; fmul Double precision multiply.
|
;; fmul Double precision multiply.
|
;; fdivs Single precision sqrt or division.
|
;; fdivs Single precision sqrt or division.
|
;; fdivd Double precision sqrt or division.
|
;; fdivd Double precision sqrt or division.
|
;; f_flag fmstat operation
|
;; f_flag fmstat operation
|
;; f_load Floating point load from memory.
|
;; f_load Floating point load from memory.
|
;; f_store Floating point store to memory.
|
;; f_store Floating point store to memory.
|
;; f_2_r Transfer vfp to arm reg.
|
;; f_2_r Transfer vfp to arm reg.
|
;; r_2_f Transfer arm to vfp reg.
|
;; r_2_f Transfer arm to vfp reg.
|
|
|
;; Note, no instruction can issue to the VFP if the core is stalled in the
|
;; Note, no instruction can issue to the VFP if the core is stalled in the
|
;; first execute state. We model this by using 1020a_e in the first cycle.
|
;; first execute state. We model this by using 1020a_e in the first cycle.
|
(define_insn_reservation "v10_ffarith" 5
|
(define_insn_reservation "v10_ffarith" 5
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "ffarith"))
|
(eq_attr "type" "ffarith"))
|
"1020a_e+v10_fmac")
|
"1020a_e+v10_fmac")
|
|
|
(define_insn_reservation "v10_farith" 5
|
(define_insn_reservation "v10_farith" 5
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "farith"))
|
(eq_attr "type" "farith"))
|
"1020a_e+v10_fmac")
|
"1020a_e+v10_fmac")
|
|
|
(define_insn_reservation "v10_cvt" 5
|
(define_insn_reservation "v10_cvt" 5
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_cvt"))
|
(eq_attr "type" "f_cvt"))
|
"1020a_e+v10_fmac")
|
"1020a_e+v10_fmac")
|
|
|
(define_insn_reservation "v10_fmul" 6
|
(define_insn_reservation "v10_fmul" 6
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "fmul"))
|
(eq_attr "type" "fmul"))
|
"1020a_e+v10_fmac*2")
|
"1020a_e+v10_fmac*2")
|
|
|
(define_insn_reservation "v10_fdivs" 18
|
(define_insn_reservation "v10_fdivs" 18
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "fdivs"))
|
(eq_attr "type" "fdivs"))
|
"1020a_e+v10_ds*14")
|
"1020a_e+v10_ds*14")
|
|
|
(define_insn_reservation "v10_fdivd" 32
|
(define_insn_reservation "v10_fdivd" 32
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "fdivd"))
|
(eq_attr "type" "fdivd"))
|
"1020a_e+v10_fmac+v10_ds*28")
|
"1020a_e+v10_fmac+v10_ds*28")
|
|
|
(define_insn_reservation "v10_floads" 4
|
(define_insn_reservation "v10_floads" 4
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_loads"))
|
(eq_attr "type" "f_loads"))
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
|
|
;; We model a load of a double as needing all the vfp ls* stage in cycle 1.
|
;; We model a load of a double as needing all the vfp ls* stage in cycle 1.
|
;; This gives the correct mix between single-and double loads where a flds
|
;; This gives the correct mix between single-and double loads where a flds
|
;; followed by and fldd will stall for one cycle, but two back-to-back fldd
|
;; followed by and fldd will stall for one cycle, but two back-to-back fldd
|
;; insns stall for two cycles.
|
;; insns stall for two cycles.
|
(define_insn_reservation "v10_floadd" 5
|
(define_insn_reservation "v10_floadd" 5
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_loadd"))
|
(eq_attr "type" "f_loadd"))
|
"1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")
|
"1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")
|
|
|
;; Moves to/from arm regs also use the load/store pipeline.
|
;; Moves to/from arm regs also use the load/store pipeline.
|
|
|
(define_insn_reservation "v10_c2v" 4
|
(define_insn_reservation "v10_c2v" 4
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "r_2_f"))
|
(eq_attr "type" "r_2_f"))
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
|
|
(define_insn_reservation "v10_fstores" 1
|
(define_insn_reservation "v10_fstores" 1
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_stores"))
|
(eq_attr "type" "f_stores"))
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
"1020a_e+1020l_e+v10_ls1,v10_ls2")
|
|
|
(define_insn_reservation "v10_fstored" 1
|
(define_insn_reservation "v10_fstored" 1
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_stored"))
|
(eq_attr "type" "f_stored"))
|
"1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")
|
"1020a_e+1020l_e+v10_ls1+v10_ls2+v10_ls3,v10_ls2+v10_ls3,v10_ls3")
|
|
|
(define_insn_reservation "v10_v2c" 1
|
(define_insn_reservation "v10_v2c" 1
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_2_r"))
|
(eq_attr "type" "f_2_r"))
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
(define_insn_reservation "v10_to_cpsr" 2
|
(define_insn_reservation "v10_to_cpsr" 2
|
(and (eq_attr "vfp10" "yes")
|
(and (eq_attr "vfp10" "yes")
|
(eq_attr "type" "f_flag"))
|
(eq_attr "type" "f_flag"))
|
"1020a_e+v10_fmstat,1020a_e+1020l_e,1020l_m,1020l_w")
|
"1020a_e+v10_fmstat,1020a_e+1020l_e,1020l_m,1020l_w")
|
|
|
;; VFP bypasses
|
;; VFP bypasses
|
|
|
;; There are bypasses for most operations other than store
|
;; There are bypasses for most operations other than store
|
|
|
(define_bypass 3
|
(define_bypass 3
|
"v10_c2v,v10_floads"
|
"v10_c2v,v10_floads"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd,v10_cvt")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd,v10_cvt")
|
|
|
(define_bypass 4
|
(define_bypass 4
|
"v10_floadd"
|
"v10_floadd"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
|
|
;; Arithmetic to other arithmetic saves a cycle due to forwarding
|
;; Arithmetic to other arithmetic saves a cycle due to forwarding
|
(define_bypass 4
|
(define_bypass 4
|
"v10_ffarith,v10_farith"
|
"v10_ffarith,v10_farith"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
|
|
(define_bypass 5
|
(define_bypass 5
|
"v10_fmul"
|
"v10_fmul"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
|
|
(define_bypass 17
|
(define_bypass 17
|
"v10_fdivs"
|
"v10_fdivs"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
|
|
(define_bypass 31
|
(define_bypass 31
|
"v10_fdivd"
|
"v10_fdivd"
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
"v10_ffarith,v10_farith,v10_fmul,v10_fdivs,v10_fdivd")
|
|
|
;; VFP anti-dependencies.
|
;; VFP anti-dependencies.
|
|
|
;; There is one anti-dependence in the following case (not yet modelled):
|
;; There is one anti-dependence in the following case (not yet modelled):
|
;; - After a store: one extra cycle for both fsts and fstd
|
;; - After a store: one extra cycle for both fsts and fstd
|
;; Note, back-to-back fstd instructions will overload the load/store datapath
|
;; Note, back-to-back fstd instructions will overload the load/store datapath
|
;; causing a two-cycle stall.
|
;; causing a two-cycle stall.
|
|
|
