OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [mips/] [configure.in] - Diff between revs 158 and 816

Only display areas with differences | Details | Blame | View Log

Rev 158 Rev 816
# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000, 2002 Cygnus Support
# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000, 2002 Cygnus Support
#
#
# The authors hereby grant permission to use, copy, modify, distribute,
# The authors hereby grant permission to use, copy, modify, distribute,
# and license this software and its documentation for any purpose, provided
# and license this software and its documentation for any purpose, provided
# that existing copyright notices are retained in all copies and that this
# that existing copyright notices are retained in all copies and that this
# notice is included verbatim in any distributions. No written agreement,
# notice is included verbatim in any distributions. No written agreement,
# license, or royalty fee is required for any of the authorized uses.
# license, or royalty fee is required for any of the authorized uses.
# Modifications to this software may be copyrighted by their authors
# Modifications to this software may be copyrighted by their authors
# and need not follow the licensing terms described here, provided that
# and need not follow the licensing terms described here, provided that
# the new terms are clearly indicated on the first page of each file where
# the new terms are clearly indicated on the first page of each file where
# they apply.
# they apply.
#
#
# Process this file with autoconf to produce a configure script.
# Process this file with autoconf to produce a configure script.
#
#
AC_PREREQ(2.59)
AC_PREREQ(2.59)
AC_INIT(crt0.S)
AC_INIT(crt0.S)
if test "${enable_shared}" = "yes" ; then
if test "${enable_shared}" = "yes" ; then
    echo "Shared libraries not supported for cross compiling, ignored"
    echo "Shared libraries not supported for cross compiling, ignored"
fi
fi
if test "$srcdir" = "." ; then
if test "$srcdir" = "." ; then
  if test "${with_target_subdir}" != "." ; then
  if test "${with_target_subdir}" != "." ; then
    libgloss_topdir="${srcdir}/${with_multisrctop}../../.."
    libgloss_topdir="${srcdir}/${with_multisrctop}../../.."
  else
  else
    libgloss_topdir="${srcdir}/${with_multisrctop}../.."
    libgloss_topdir="${srcdir}/${with_multisrctop}../.."
  fi
  fi
else
else
  libgloss_topdir="${srcdir}/../.."
  libgloss_topdir="${srcdir}/../.."
fi
fi
AC_CONFIG_AUX_DIR($libgloss_topdir)
AC_CONFIG_AUX_DIR($libgloss_topdir)
AC_CANONICAL_SYSTEM
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
AC_ARG_PROGRAM
AC_PROG_INSTALL
AC_PROG_INSTALL
LIB_AC_PROG_CC
LIB_AC_PROG_CC
AS=${AS-as}
AS=${AS-as}
AC_SUBST(AS)
AC_SUBST(AS)
AR=${AR-ar}
AR=${AR-ar}
AC_SUBST(AR)
AC_SUBST(AR)
LD=${LD-ld}
LD=${LD-ld}
AC_SUBST(LD)
AC_SUBST(LD)
AC_PROG_RANLIB
AC_PROG_RANLIB
LIB_AM_PROG_AS
LIB_AM_PROG_AS
crt0=crt0.o
crt0=crt0.o
pcrt0=pcrt0.o
pcrt0=pcrt0.o
case "${target}" in
case "${target}" in
  mips*-tx39*-*|mipstx39*-*-*)
  mips*-tx39*-*|mipstx39*-*-*)
        part_specific_obj=
        part_specific_obj=
        part_specific_defines=
        part_specific_defines=
        script_list="dve idt jmr3904app jmr3904dram jmr3904dram-java jmr3904app-java"
        script_list="dve idt jmr3904app jmr3904dram jmr3904dram-java jmr3904app-java"
        bsp_list="libdve.a libidt.a libjmr3904.a"
        bsp_list="libdve.a libidt.a libjmr3904.a"
        ;;
        ;;
  mipsisa32-*-* | mipsisa32el-*-* | \
  mipsisa32-*-* | mipsisa32el-*-* | \
  mipsisa32r2-*-* | mipsisa32r2el-*-* | \
  mipsisa32r2-*-* | mipsisa32r2el-*-* | \
  mipsisa64*-*-*)
  mipsisa64*-*-*)
        crt0="crt0_cfe.o crt0_cygmon.o crt0.o"
        crt0="crt0_cfe.o crt0_cygmon.o crt0.o"
        pcrt0="pcrt0.o"
        pcrt0="pcrt0.o"
        part_specific_obj=
        part_specific_obj=
        part_specific_defines=
        part_specific_defines=
        script_list="idt32 idt64 cfe"
        script_list="idt32 idt64 cfe"
        bsp_list="libcygmon.a libidt.a libcfe.a"
        bsp_list="libcygmon.a libidt.a libcfe.a"
        ;;
        ;;
  mips*-lsi*-*)
  mips*-lsi*-*)
        part_specific_obj=entry.o
        part_specific_obj=entry.o
        part_specific_defines=
        part_specific_defines=
        script_list="lsi"
        script_list="lsi"
        bsp_list=liblsi.a
        bsp_list=liblsi.a
        ;;
        ;;
  mips64vr5*-*-*)
  mips64vr5*-*-*)
        part_specific_obj="vr5xxx.o cma101.o"
        part_specific_obj="vr5xxx.o cma101.o"
        part_specific_defines=-DR5000
        part_specific_defines=-DR5000
        script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
        script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
        bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
        bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
        ;;
        ;;
  mips64vr-*-* | mips64vrel-*-*)
  mips64vr-*-* | mips64vrel-*-*)
        part_specific_obj="vr5xxx.o cma101.o"
        part_specific_obj="vr5xxx.o cma101.o"
        script_list="ddb ddb-kseg0 nullmon"
        script_list="ddb ddb-kseg0 nullmon"
        bsp_list="libpmon.a libnullmon.a"
        bsp_list="libpmon.a libnullmon.a"
        ;;
        ;;
  *)
  *)
        crt0="crt0_cfe.o crt0.o"
        crt0="crt0_cfe.o crt0.o"
        part_specific_obj="vr4300.o cma101.o"
        part_specific_obj="vr4300.o cma101.o"
        part_specific_defines=
        part_specific_defines=
        script_list="idt pmon ddb ddb-kseg0 lsi cfe idtecoff nullmon"
        script_list="idt pmon ddb ddb-kseg0 lsi cfe idtecoff nullmon"
        bsp_list="libidt.a libpmon.a liblsi.a libcfe.a libnullmon.a"
        bsp_list="libidt.a libpmon.a liblsi.a libcfe.a libnullmon.a"
        ;;
        ;;
esac
esac
host_makefile_frag=${srcdir}/../config/default.mh
host_makefile_frag=${srcdir}/../config/default.mh
target_makefile_frag=${srcdir}/../config/mips.mt
target_makefile_frag=${srcdir}/../config/mips.mt
dnl We have to assign the same value to other variables because autoconf
dnl We have to assign the same value to other variables because autoconf
dnl doesn't provide a mechanism to substitute a replacement keyword with
dnl doesn't provide a mechanism to substitute a replacement keyword with
dnl arbitrary data or pathnames.
dnl arbitrary data or pathnames.
dnl
dnl
host_makefile_frag_path=$host_makefile_frag
host_makefile_frag_path=$host_makefile_frag
AC_SUBST(host_makefile_frag_path)
AC_SUBST(host_makefile_frag_path)
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(host_makefile_frag)
target_makefile_frag_path=$target_makefile_frag
target_makefile_frag_path=$target_makefile_frag
AC_SUBST(target_makefile_frag_path)
AC_SUBST(target_makefile_frag_path)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(part_specific_obj)
AC_SUBST(part_specific_obj)
AC_SUBST(part_specific_defines)
AC_SUBST(part_specific_defines)
AC_SUBST(script_list)
AC_SUBST(script_list)
AC_SUBST(bsp_list)
AC_SUBST(bsp_list)
AC_SUBST(crt0)
AC_SUBST(crt0)
AC_SUBST(pcrt0)
AC_SUBST(pcrt0)
AC_CONFIG_FILES(Makefile,
AC_CONFIG_FILES(Makefile,
. ${libgloss_topdir}/config-ml.in,
. ${libgloss_topdir}/config-ml.in,
srcdir=${srcdir}
srcdir=${srcdir}
target=${target}
target=${target}
with_multisubdir=${with_multisubdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="${ac_configure_args} --enable-multilib"
ac_configure_args="${ac_configure_args} --enable-multilib"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
libgloss_topdir=${libgloss_topdir}
libgloss_topdir=${libgloss_topdir}
)
)
AC_OUTPUT
AC_OUTPUT
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.