This is doc/gccinstall.info, produced by makeinfo version 4.8 from
|
This is doc/gccinstall.info, produced by makeinfo version 4.8 from
|
/scratch/mitchell/gcc-releases/gcc-4.2.2/gcc-4.2.2/gcc/doc/install.texi.
|
/scratch/mitchell/gcc-releases/gcc-4.2.2/gcc-4.2.2/gcc/doc/install.texi.
|
|
|
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software
|
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software
|
Foundation, Inc.
|
Foundation, Inc.
|
|
|
Permission is granted to copy, distribute and/or modify this document
|
Permission is granted to copy, distribute and/or modify this document
|
under the terms of the GNU Free Documentation License, Version 1.2 or
|
under the terms of the GNU Free Documentation License, Version 1.2 or
|
any later version published by the Free Software Foundation; with no
|
any later version published by the Free Software Foundation; with no
|
Invariant Sections, the Front-Cover texts being (a) (see below), and
|
Invariant Sections, the Front-Cover texts being (a) (see below), and
|
with the Back-Cover Texts being (b) (see below). A copy of the license
|
with the Back-Cover Texts being (b) (see below). A copy of the license
|
is included in the section entitled "GNU Free Documentation License".
|
is included in the section entitled "GNU Free Documentation License".
|
|
|
(a) The FSF's Front-Cover Text is:
|
(a) The FSF's Front-Cover Text is:
|
|
|
A GNU Manual
|
A GNU Manual
|
|
|
(b) The FSF's Back-Cover Text is:
|
(b) The FSF's Back-Cover Text is:
|
|
|
You have freedom to copy and modify this GNU Manual, like GNU
|
You have freedom to copy and modify this GNU Manual, like GNU
|
software. Copies published by the Free Software Foundation raise
|
software. Copies published by the Free Software Foundation raise
|
funds for GNU development.
|
funds for GNU development.
|
|
|
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software
|
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software
|
Foundation, Inc.
|
Foundation, Inc.
|
|
|
Permission is granted to copy, distribute and/or modify this document
|
Permission is granted to copy, distribute and/or modify this document
|
under the terms of the GNU Free Documentation License, Version 1.2 or
|
under the terms of the GNU Free Documentation License, Version 1.2 or
|
any later version published by the Free Software Foundation; with no
|
any later version published by the Free Software Foundation; with no
|
Invariant Sections, the Front-Cover texts being (a) (see below), and
|
Invariant Sections, the Front-Cover texts being (a) (see below), and
|
with the Back-Cover Texts being (b) (see below). A copy of the license
|
with the Back-Cover Texts being (b) (see below). A copy of the license
|
is included in the section entitled "GNU Free Documentation License".
|
is included in the section entitled "GNU Free Documentation License".
|
|
|
(a) The FSF's Front-Cover Text is:
|
(a) The FSF's Front-Cover Text is:
|
|
|
A GNU Manual
|
A GNU Manual
|
|
|
(b) The FSF's Back-Cover Text is:
|
(b) The FSF's Back-Cover Text is:
|
|
|
You have freedom to copy and modify this GNU Manual, like GNU
|
You have freedom to copy and modify this GNU Manual, like GNU
|
software. Copies published by the Free Software Foundation raise
|
software. Copies published by the Free Software Foundation raise
|
funds for GNU development.
|
funds for GNU development.
|
|
|
INFO-DIR-SECTION Software development
|
INFO-DIR-SECTION Software development
|
START-INFO-DIR-ENTRY
|
START-INFO-DIR-ENTRY
|
* gccinstall: (gccinstall). Installing the GNU Compiler Collection.
|
* gccinstall: (gccinstall). Installing the GNU Compiler Collection.
|
END-INFO-DIR-ENTRY
|
END-INFO-DIR-ENTRY
|
|
|
|
|
File: gccinstall.info, Node: Top, Up: (dir)
|
File: gccinstall.info, Node: Top, Up: (dir)
|
|
|
* Menu:
|
* Menu:
|
|
|
* Installing GCC:: This document describes the generic installation
|
* Installing GCC:: This document describes the generic installation
|
procedure for GCC as well as detailing some target
|
procedure for GCC as well as detailing some target
|
specific installation instructions.
|
specific installation instructions.
|
|
|
* Specific:: Host/target specific installation notes for GCC.
|
* Specific:: Host/target specific installation notes for GCC.
|
* Binaries:: Where to get pre-compiled binaries.
|
* Binaries:: Where to get pre-compiled binaries.
|
|
|
* Old:: Old installation documentation.
|
* Old:: Old installation documentation.
|
|
|
* GNU Free Documentation License:: How you can copy and share this manual.
|
* GNU Free Documentation License:: How you can copy and share this manual.
|
* Concept Index:: This index has two entries.
|
* Concept Index:: This index has two entries.
|
|
|
|
|
File: gccinstall.info, Node: Installing GCC, Next: Binaries, Up: Top
|
File: gccinstall.info, Node: Installing GCC, Next: Binaries, Up: Top
|
|
|
1 Installing GCC
|
1 Installing GCC
|
****************
|
****************
|
|
|
The latest version of this document is always available at
|
The latest version of this document is always available at
|
http://gcc.gnu.org/install/.
|
http://gcc.gnu.org/install/.
|
|
|
This document describes the generic installation procedure for GCC
|
This document describes the generic installation procedure for GCC
|
as well as detailing some target specific installation instructions.
|
as well as detailing some target specific installation instructions.
|
|
|
GCC includes several components that previously were separate
|
GCC includes several components that previously were separate
|
distributions with their own installation instructions. This document
|
distributions with their own installation instructions. This document
|
supersedes all package specific installation instructions.
|
supersedes all package specific installation instructions.
|
|
|
_Before_ starting the build/install procedure please check the *Note
|
_Before_ starting the build/install procedure please check the *Note
|
host/target specific installation notes: Specific. We recommend you
|
host/target specific installation notes: Specific. We recommend you
|
browse the entire generic installation instructions before you proceed.
|
browse the entire generic installation instructions before you proceed.
|
|
|
Lists of successful builds for released versions of GCC are
|
Lists of successful builds for released versions of GCC are
|
available at `http://gcc.gnu.org/buildstat.html'. These lists are
|
available at `http://gcc.gnu.org/buildstat.html'. These lists are
|
updated as new information becomes available.
|
updated as new information becomes available.
|
|
|
The installation procedure itself is broken into five steps.
|
The installation procedure itself is broken into five steps.
|
|
|
* Menu:
|
* Menu:
|
|
|
* Prerequisites::
|
* Prerequisites::
|
* Downloading the source::
|
* Downloading the source::
|
* Configuration::
|
* Configuration::
|
* Building::
|
* Building::
|
* Testing:: (optional)
|
* Testing:: (optional)
|
* Final install::
|
* Final install::
|
|
|
Please note that GCC does not support `make uninstall' and probably
|
Please note that GCC does not support `make uninstall' and probably
|
won't do so in the near future as this would open a can of worms.
|
won't do so in the near future as this would open a can of worms.
|
Instead, we suggest that you install GCC into a directory of its own
|
Instead, we suggest that you install GCC into a directory of its own
|
and simply remove that directory when you do not need that specific
|
and simply remove that directory when you do not need that specific
|
version of GCC any longer, and, if shared libraries are installed there
|
version of GCC any longer, and, if shared libraries are installed there
|
as well, no more binaries exist that use them.
|
as well, no more binaries exist that use them.
|
|
|
|
|
File: gccinstall.info, Node: Prerequisites, Next: Downloading the source, Up: Installing GCC
|
File: gccinstall.info, Node: Prerequisites, Next: Downloading the source, Up: Installing GCC
|
|
|
2 Prerequisites
|
2 Prerequisites
|
***************
|
***************
|
|
|
GCC requires that various tools and packages be available for use in
|
GCC requires that various tools and packages be available for use in
|
the build procedure. Modifying GCC sources requires additional tools
|
the build procedure. Modifying GCC sources requires additional tools
|
described below.
|
described below.
|
|
|
Tools/packages necessary for building GCC
|
Tools/packages necessary for building GCC
|
=========================================
|
=========================================
|
|
|
ISO C90 compiler
|
ISO C90 compiler
|
Necessary to bootstrap GCC, although versions of GCC prior to 3.4
|
Necessary to bootstrap GCC, although versions of GCC prior to 3.4
|
also allow bootstrapping with a traditional (K&R) C compiler.
|
also allow bootstrapping with a traditional (K&R) C compiler.
|
|
|
To build all languages in a cross-compiler or other configuration
|
To build all languages in a cross-compiler or other configuration
|
where 3-stage bootstrap is not performed, you need to start with
|
where 3-stage bootstrap is not performed, you need to start with
|
an existing GCC binary (version 2.95 or later) because source code
|
an existing GCC binary (version 2.95 or later) because source code
|
for language frontends other than C might use GCC extensions.
|
for language frontends other than C might use GCC extensions.
|
|
|
GNAT
|
GNAT
|
In order to build the Ada compiler (GNAT) you must already have
|
In order to build the Ada compiler (GNAT) you must already have
|
GNAT installed because portions of the Ada frontend are written in
|
GNAT installed because portions of the Ada frontend are written in
|
Ada (with GNAT extensions.) Refer to the Ada installation
|
Ada (with GNAT extensions.) Refer to the Ada installation
|
instructions for more specific information.
|
instructions for more specific information.
|
|
|
A "working" POSIX compatible shell, or GNU bash
|
A "working" POSIX compatible shell, or GNU bash
|
Necessary when running `configure' because some `/bin/sh' shells
|
Necessary when running `configure' because some `/bin/sh' shells
|
have bugs and may crash when configuring the target libraries. In
|
have bugs and may crash when configuring the target libraries. In
|
other cases, `/bin/sh' or `ksh' have disastrous corner-case
|
other cases, `/bin/sh' or `ksh' have disastrous corner-case
|
performance problems. This can cause target `configure' runs to
|
performance problems. This can cause target `configure' runs to
|
literally take days to complete in some cases.
|
literally take days to complete in some cases.
|
|
|
So on some platforms `/bin/ksh' is sufficient, on others it isn't.
|
So on some platforms `/bin/ksh' is sufficient, on others it isn't.
|
See the host/target specific instructions for your platform, or
|
See the host/target specific instructions for your platform, or
|
use `bash' to be sure. Then set `CONFIG_SHELL' in your
|
use `bash' to be sure. Then set `CONFIG_SHELL' in your
|
environment to your "good" shell prior to running
|
environment to your "good" shell prior to running
|
`configure'/`make'.
|
`configure'/`make'.
|
|
|
`zsh' is not a fully compliant POSIX shell and will not work when
|
`zsh' is not a fully compliant POSIX shell and will not work when
|
configuring GCC.
|
configuring GCC.
|
|
|
GNU binutils
|
GNU binutils
|
Necessary in some circumstances, optional in others. See the
|
Necessary in some circumstances, optional in others. See the
|
host/target specific instructions for your platform for the exact
|
host/target specific instructions for your platform for the exact
|
requirements.
|
requirements.
|
|
|
gzip version 1.2.4 (or later) or
|
gzip version 1.2.4 (or later) or
|
bzip2 version 1.0.2 (or later)
|
bzip2 version 1.0.2 (or later)
|
Necessary to uncompress GCC `tar' files when source code is
|
Necessary to uncompress GCC `tar' files when source code is
|
obtained via FTP mirror sites.
|
obtained via FTP mirror sites.
|
|
|
GNU make version 3.79.1 (or later)
|
GNU make version 3.79.1 (or later)
|
You must have GNU make installed to build GCC.
|
You must have GNU make installed to build GCC.
|
|
|
GNU tar version 1.14 (or later)
|
GNU tar version 1.14 (or later)
|
Necessary (only on some platforms) to untar the source code. Many
|
Necessary (only on some platforms) to untar the source code. Many
|
systems' `tar' programs will also work, only try GNU `tar' if you
|
systems' `tar' programs will also work, only try GNU `tar' if you
|
have problems.
|
have problems.
|
|
|
GNU Multiple Precision Library (GMP) version 4.1 (or later)
|
GNU Multiple Precision Library (GMP) version 4.1 (or later)
|
Necessary to build the Fortran frontend. If you do not have it
|
Necessary to build the Fortran frontend. If you do not have it
|
installed in your library search path, you will have to configure
|
installed in your library search path, you will have to configure
|
with the `--with-gmp' configure option. See also `--with-gmp-lib'
|
with the `--with-gmp' configure option. See also `--with-gmp-lib'
|
and `--with-gmp-include'.
|
and `--with-gmp-include'.
|
|
|
MPFR Library version 2.2.1 (or later)
|
MPFR Library version 2.2.1 (or later)
|
Necessary to build the Fortran frontend. It can be downloaded from
|
Necessary to build the Fortran frontend. It can be downloaded from
|
`http://www.mpfr.org/'. The version of MPFR that is bundled with
|
`http://www.mpfr.org/'. The version of MPFR that is bundled with
|
GMP 4.1.x contains numerous bugs. Although GNU Fortran will appear
|
GMP 4.1.x contains numerous bugs. Although GNU Fortran will appear
|
to function with the buggy versions of MPFR, there are a few GNU
|
to function with the buggy versions of MPFR, there are a few GNU
|
Fortran bugs that will not be fixed when using this version. It
|
Fortran bugs that will not be fixed when using this version. It
|
is strongly recommended to upgrade to the recommended version of
|
is strongly recommended to upgrade to the recommended version of
|
MPFR.
|
MPFR.
|
|
|
The `--with-mpfr' configure option should be used if your MPFR
|
The `--with-mpfr' configure option should be used if your MPFR
|
Library is not installed in your default library search path. See
|
Library is not installed in your default library search path. See
|
also `--with-mpfr-lib' and `--with-mpfr-include'.
|
also `--with-mpfr-lib' and `--with-mpfr-include'.
|
|
|
`jar', or InfoZIP (`zip' and `unzip')
|
`jar', or InfoZIP (`zip' and `unzip')
|
Necessary to build libgcj, the GCJ runtime.
|
Necessary to build libgcj, the GCJ runtime.
|
|
|
|
|
Tools/packages necessary for modifying GCC
|
Tools/packages necessary for modifying GCC
|
==========================================
|
==========================================
|
|
|
autoconf versions 2.13 and 2.59
|
autoconf versions 2.13 and 2.59
|
GNU m4 version 1.4 (or later)
|
GNU m4 version 1.4 (or later)
|
Necessary when modifying `configure.ac', `aclocal.m4', etc. to
|
Necessary when modifying `configure.ac', `aclocal.m4', etc. to
|
regenerate `configure' and `config.in' files. Most directories
|
regenerate `configure' and `config.in' files. Most directories
|
require autoconf 2.59 (exactly), but the toplevel still requires
|
require autoconf 2.59 (exactly), but the toplevel still requires
|
autoconf 2.13 (exactly).
|
autoconf 2.13 (exactly).
|
|
|
automake version 1.9.6
|
automake version 1.9.6
|
Necessary when modifying a `Makefile.am' file to regenerate its
|
Necessary when modifying a `Makefile.am' file to regenerate its
|
associated `Makefile.in'.
|
associated `Makefile.in'.
|
|
|
Much of GCC does not use automake, so directly edit the
|
Much of GCC does not use automake, so directly edit the
|
`Makefile.in' file. Specifically this applies to the `gcc',
|
`Makefile.in' file. Specifically this applies to the `gcc',
|
`intl', `libcpp', `libiberty', `libobjc' directories as well as
|
`intl', `libcpp', `libiberty', `libobjc' directories as well as
|
any of their subdirectories.
|
any of their subdirectories.
|
|
|
For directories that use automake, GCC requires the latest release
|
For directories that use automake, GCC requires the latest release
|
in the 1.9.x series, which is currently 1.9.6. When regenerating
|
in the 1.9.x series, which is currently 1.9.6. When regenerating
|
a directory to a newer version, please update all the directories
|
a directory to a newer version, please update all the directories
|
using an older 1.9.x to the latest released version.
|
using an older 1.9.x to the latest released version.
|
|
|
gettext version 0.14.5 (or later)
|
gettext version 0.14.5 (or later)
|
Needed to regenerate `gcc.pot'.
|
Needed to regenerate `gcc.pot'.
|
|
|
gperf version 2.7.2 (or later)
|
gperf version 2.7.2 (or later)
|
Necessary when modifying `gperf' input files, e.g.
|
Necessary when modifying `gperf' input files, e.g.
|
`gcc/cp/cfns.gperf' to regenerate its associated header file, e.g.
|
`gcc/cp/cfns.gperf' to regenerate its associated header file, e.g.
|
`gcc/cp/cfns.h'.
|
`gcc/cp/cfns.h'.
|
|
|
DejaGnu 1.4.4
|
DejaGnu 1.4.4
|
Expect
|
Expect
|
Tcl
|
Tcl
|
Necessary to run the GCC testsuite; see the section on testing for
|
Necessary to run the GCC testsuite; see the section on testing for
|
details.
|
details.
|
|
|
autogen version 5.5.4 (or later) and
|
autogen version 5.5.4 (or later) and
|
guile version 1.4.1 (or later)
|
guile version 1.4.1 (or later)
|
Necessary to regenerate `fixinc/fixincl.x' from
|
Necessary to regenerate `fixinc/fixincl.x' from
|
`fixinc/inclhack.def' and `fixinc/*.tpl'.
|
`fixinc/inclhack.def' and `fixinc/*.tpl'.
|
|
|
Necessary to run `make check' for `fixinc'.
|
Necessary to run `make check' for `fixinc'.
|
|
|
Necessary to regenerate the top level `Makefile.in' file from
|
Necessary to regenerate the top level `Makefile.in' file from
|
`Makefile.tpl' and `Makefile.def'.
|
`Makefile.tpl' and `Makefile.def'.
|
|
|
GNU Bison version 1.28 (or later)
|
GNU Bison version 1.28 (or later)
|
Berkeley `yacc' (`byacc') is also reported to work other than for
|
Berkeley `yacc' (`byacc') is also reported to work other than for
|
GCJ.
|
GCJ.
|
|
|
Necessary when modifying `*.y' files.
|
Necessary when modifying `*.y' files.
|
|
|
Necessary to build GCC during development because the generated
|
Necessary to build GCC during development because the generated
|
output files are not included in the SVN repository. They are
|
output files are not included in the SVN repository. They are
|
included in releases.
|
included in releases.
|
|
|
Flex version 2.5.4 (or later)
|
Flex version 2.5.4 (or later)
|
Necessary when modifying `*.l' files.
|
Necessary when modifying `*.l' files.
|
|
|
Necessary to build GCC during development because the generated
|
Necessary to build GCC during development because the generated
|
output files are not included in the SVN repository. They are
|
output files are not included in the SVN repository. They are
|
included in releases.
|
included in releases.
|
|
|
Texinfo version 4.4 (or later)
|
Texinfo version 4.4 (or later)
|
Necessary for running `makeinfo' when modifying `*.texi' files to
|
Necessary for running `makeinfo' when modifying `*.texi' files to
|
test your changes.
|
test your changes.
|
|
|
Necessary for running `make dvi' or `make pdf' to create printable
|
Necessary for running `make dvi' or `make pdf' to create printable
|
documentation in DVI or PDF format. Texinfo version 4.8 or later
|
documentation in DVI or PDF format. Texinfo version 4.8 or later
|
is required for `make pdf'.
|
is required for `make pdf'.
|
|
|
Necessary to build GCC documentation during development because the
|
Necessary to build GCC documentation during development because the
|
generated output files are not included in the SVN repository.
|
generated output files are not included in the SVN repository.
|
They are included in releases.
|
They are included in releases.
|
|
|
TeX (any working version)
|
TeX (any working version)
|
Necessary for running `texi2dvi' and `texi2pdf', which are used
|
Necessary for running `texi2dvi' and `texi2pdf', which are used
|
when running `make dvi' or `make pdf' to create DVI or PDF files,
|
when running `make dvi' or `make pdf' to create DVI or PDF files,
|
respectively.
|
respectively.
|
|
|
SVN (any version)
|
SVN (any version)
|
SSH (any version)
|
SSH (any version)
|
Necessary to access the SVN repository. Public releases and weekly
|
Necessary to access the SVN repository. Public releases and weekly
|
snapshots of the development sources are also available via FTP.
|
snapshots of the development sources are also available via FTP.
|
|
|
Perl version 5.6.1 (or later)
|
Perl version 5.6.1 (or later)
|
Necessary when regenerating `Makefile' dependencies in libiberty.
|
Necessary when regenerating `Makefile' dependencies in libiberty.
|
Necessary when regenerating `libiberty/functions.texi'. Necessary
|
Necessary when regenerating `libiberty/functions.texi'. Necessary
|
when generating manpages from Texinfo manuals. Necessary when
|
when generating manpages from Texinfo manuals. Necessary when
|
targetting Darwin, building libstdc++, and not using
|
targetting Darwin, building libstdc++, and not using
|
`--disable-symvers'. Used by various scripts to generate some
|
`--disable-symvers'. Used by various scripts to generate some
|
files included in SVN (mainly Unicode-related and rarely changing)
|
files included in SVN (mainly Unicode-related and rarely changing)
|
from source tables.
|
from source tables.
|
|
|
GNU diffutils version 2.7 (or later)
|
GNU diffutils version 2.7 (or later)
|
Useful when submitting patches for the GCC source code.
|
Useful when submitting patches for the GCC source code.
|
|
|
patch version 2.5.4 (or later)
|
patch version 2.5.4 (or later)
|
Necessary when applying patches, created with `diff', to one's own
|
Necessary when applying patches, created with `diff', to one's own
|
sources.
|
sources.
|
|
|
|
|
|
|
File: gccinstall.info, Node: Downloading the source, Next: Configuration, Prev: Prerequisites, Up: Installing GCC
|
File: gccinstall.info, Node: Downloading the source, Next: Configuration, Prev: Prerequisites, Up: Installing GCC
|
|
|
3 Downloading GCC
|
3 Downloading GCC
|
*****************
|
*****************
|
|
|
GCC is distributed via SVN and FTP tarballs compressed with `gzip' or
|
GCC is distributed via SVN and FTP tarballs compressed with `gzip' or
|
`bzip2'. It is possible to download a full distribution or specific
|
`bzip2'. It is possible to download a full distribution or specific
|
components.
|
components.
|
|
|
Please refer to the releases web page for information on how to
|
Please refer to the releases web page for information on how to
|
obtain GCC.
|
obtain GCC.
|
|
|
The full distribution includes the C, C++, Objective-C, Fortran,
|
The full distribution includes the C, C++, Objective-C, Fortran,
|
Java, and Ada (in the case of GCC 3.1 and later) compilers. The full
|
Java, and Ada (in the case of GCC 3.1 and later) compilers. The full
|
distribution also includes runtime libraries for C++, Objective-C,
|
distribution also includes runtime libraries for C++, Objective-C,
|
Fortran, and Java. In GCC 3.0 and later versions, the GNU compiler
|
Fortran, and Java. In GCC 3.0 and later versions, the GNU compiler
|
testsuites are also included in the full distribution.
|
testsuites are also included in the full distribution.
|
|
|
If you choose to download specific components, you must download the
|
If you choose to download specific components, you must download the
|
core GCC distribution plus any language specific distributions you wish
|
core GCC distribution plus any language specific distributions you wish
|
to use. The core distribution includes the C language front end as
|
to use. The core distribution includes the C language front end as
|
well as the shared components. Each language has a tarball which
|
well as the shared components. Each language has a tarball which
|
includes the language front end as well as the language runtime (when
|
includes the language front end as well as the language runtime (when
|
appropriate).
|
appropriate).
|
|
|
Unpack the core distribution as well as any language specific
|
Unpack the core distribution as well as any language specific
|
distributions in the same directory.
|
distributions in the same directory.
|
|
|
If you also intend to build binutils (either to upgrade an existing
|
If you also intend to build binutils (either to upgrade an existing
|
installation or for use in place of the corresponding tools of your
|
installation or for use in place of the corresponding tools of your
|
OS), unpack the binutils distribution either in the same directory or a
|
OS), unpack the binutils distribution either in the same directory or a
|
separate one. In the latter case, add symbolic links to any components
|
separate one. In the latter case, add symbolic links to any components
|
of the binutils you intend to build alongside the compiler (`bfd',
|
of the binutils you intend to build alongside the compiler (`bfd',
|
`binutils', `gas', `gprof', `ld', `opcodes', ...) to the directory
|
`binutils', `gas', `gprof', `ld', `opcodes', ...) to the directory
|
containing the GCC sources.
|
containing the GCC sources.
|
|
|
|
|
File: gccinstall.info, Node: Configuration, Next: Building, Prev: Downloading the source, Up: Installing GCC
|
File: gccinstall.info, Node: Configuration, Next: Building, Prev: Downloading the source, Up: Installing GCC
|
|
|
4 Installing GCC: Configuration
|
4 Installing GCC: Configuration
|
*******************************
|
*******************************
|
|
|
Like most GNU software, GCC must be configured before it can be
|
Like most GNU software, GCC must be configured before it can be
|
built. This document describes the recommended configuration procedure
|
built. This document describes the recommended configuration procedure
|
for both native and cross targets.
|
for both native and cross targets.
|
|
|
We use SRCDIR to refer to the toplevel source directory for GCC; we
|
We use SRCDIR to refer to the toplevel source directory for GCC; we
|
use OBJDIR to refer to the toplevel build/object directory.
|
use OBJDIR to refer to the toplevel build/object directory.
|
|
|
If you obtained the sources via SVN, SRCDIR must refer to the top
|
If you obtained the sources via SVN, SRCDIR must refer to the top
|
`gcc' directory, the one where the `MAINTAINERS' can be found, and not
|
`gcc' directory, the one where the `MAINTAINERS' can be found, and not
|
its `gcc' subdirectory, otherwise the build will fail.
|
its `gcc' subdirectory, otherwise the build will fail.
|
|
|
If either SRCDIR or OBJDIR is located on an automounted NFS file
|
If either SRCDIR or OBJDIR is located on an automounted NFS file
|
system, the shell's built-in `pwd' command will return temporary
|
system, the shell's built-in `pwd' command will return temporary
|
pathnames. Using these can lead to various sorts of build problems.
|
pathnames. Using these can lead to various sorts of build problems.
|
To avoid this issue, set the `PWDCMD' environment variable to an
|
To avoid this issue, set the `PWDCMD' environment variable to an
|
automounter-aware `pwd' command, e.g., `pawd' or `amq -w', during the
|
automounter-aware `pwd' command, e.g., `pawd' or `amq -w', during the
|
configuration and build phases.
|
configuration and build phases.
|
|
|
First, we *highly* recommend that GCC be built into a separate
|
First, we *highly* recommend that GCC be built into a separate
|
directory than the sources which does *not* reside within the source
|
directory than the sources which does *not* reside within the source
|
tree. This is how we generally build GCC; building where SRCDIR ==
|
tree. This is how we generally build GCC; building where SRCDIR ==
|
OBJDIR should still work, but doesn't get extensive testing; building
|
OBJDIR should still work, but doesn't get extensive testing; building
|
where OBJDIR is a subdirectory of SRCDIR is unsupported.
|
where OBJDIR is a subdirectory of SRCDIR is unsupported.
|
|
|
If you have previously built GCC in the same directory for a
|
If you have previously built GCC in the same directory for a
|
different target machine, do `make distclean' to delete all files that
|
different target machine, do `make distclean' to delete all files that
|
might be invalid. One of the files this deletes is `Makefile'; if
|
might be invalid. One of the files this deletes is `Makefile'; if
|
`make distclean' complains that `Makefile' does not exist or issues a
|
`make distclean' complains that `Makefile' does not exist or issues a
|
message like "don't know how to make distclean" it probably means that
|
message like "don't know how to make distclean" it probably means that
|
the directory is already suitably clean. However, with the recommended
|
the directory is already suitably clean. However, with the recommended
|
method of building in a separate OBJDIR, you should simply use a
|
method of building in a separate OBJDIR, you should simply use a
|
different OBJDIR for each target.
|
different OBJDIR for each target.
|
|
|
Second, when configuring a native system, either `cc' or `gcc' must
|
Second, when configuring a native system, either `cc' or `gcc' must
|
be in your path or you must set `CC' in your environment before running
|
be in your path or you must set `CC' in your environment before running
|
configure. Otherwise the configuration scripts may fail.
|
configure. Otherwise the configuration scripts may fail.
|
|
|
To configure GCC:
|
To configure GCC:
|
|
|
% mkdir OBJDIR
|
% mkdir OBJDIR
|
% cd OBJDIR
|
% cd OBJDIR
|
% SRCDIR/configure [OPTIONS] [TARGET]
|
% SRCDIR/configure [OPTIONS] [TARGET]
|
|
|
Target specification
|
Target specification
|
====================
|
====================
|
|
|
* GCC has code to correctly determine the correct value for TARGET
|
* GCC has code to correctly determine the correct value for TARGET
|
for nearly all native systems. Therefore, we highly recommend you
|
for nearly all native systems. Therefore, we highly recommend you
|
not provide a configure target when configuring a native compiler.
|
not provide a configure target when configuring a native compiler.
|
|
|
* TARGET must be specified as `--target=TARGET' when configuring a
|
* TARGET must be specified as `--target=TARGET' when configuring a
|
cross compiler; examples of valid targets would be m68k-coff,
|
cross compiler; examples of valid targets would be m68k-coff,
|
sh-elf, etc.
|
sh-elf, etc.
|
|
|
* Specifying just TARGET instead of `--target=TARGET' implies that
|
* Specifying just TARGET instead of `--target=TARGET' implies that
|
the host defaults to TARGET.
|
the host defaults to TARGET.
|
|
|
Options specification
|
Options specification
|
=====================
|
=====================
|
|
|
Use OPTIONS to override several configure time options for GCC. A list
|
Use OPTIONS to override several configure time options for GCC. A list
|
of supported OPTIONS follows; `configure --help' may list other
|
of supported OPTIONS follows; `configure --help' may list other
|
options, but those not listed below may not work and should not
|
options, but those not listed below may not work and should not
|
normally be used.
|
normally be used.
|
|
|
Note that each `--enable' option has a corresponding `--disable'
|
Note that each `--enable' option has a corresponding `--disable'
|
option and that each `--with' option has a corresponding `--without'
|
option and that each `--with' option has a corresponding `--without'
|
option.
|
option.
|
|
|
`--prefix=DIRNAME'
|
`--prefix=DIRNAME'
|
Specify the toplevel installation directory. This is the
|
Specify the toplevel installation directory. This is the
|
recommended way to install the tools into a directory other than
|
recommended way to install the tools into a directory other than
|
the default. The toplevel installation directory defaults to
|
the default. The toplevel installation directory defaults to
|
`/usr/local'.
|
`/usr/local'.
|
|
|
We *highly* recommend against DIRNAME being the same or a
|
We *highly* recommend against DIRNAME being the same or a
|
subdirectory of OBJDIR or vice versa. If specifying a directory
|
subdirectory of OBJDIR or vice versa. If specifying a directory
|
beneath a user's home directory tree, some shells will not expand
|
beneath a user's home directory tree, some shells will not expand
|
DIRNAME correctly if it contains the `~' metacharacter; use
|
DIRNAME correctly if it contains the `~' metacharacter; use
|
`$HOME' instead.
|
`$HOME' instead.
|
|
|
The following standard `autoconf' options are supported. Normally
|
The following standard `autoconf' options are supported. Normally
|
you should not need to use these options.
|
you should not need to use these options.
|
`--exec-prefix=DIRNAME'
|
`--exec-prefix=DIRNAME'
|
Specify the toplevel installation directory for
|
Specify the toplevel installation directory for
|
architecture-dependent files. The default is `PREFIX'.
|
architecture-dependent files. The default is `PREFIX'.
|
|
|
`--bindir=DIRNAME'
|
`--bindir=DIRNAME'
|
Specify the installation directory for the executables called
|
Specify the installation directory for the executables called
|
by users (such as `gcc' and `g++'). The default is
|
by users (such as `gcc' and `g++'). The default is
|
`EXEC-PREFIX/bin'.
|
`EXEC-PREFIX/bin'.
|
|
|
`--libdir=DIRNAME'
|
`--libdir=DIRNAME'
|
Specify the installation directory for object code libraries
|
Specify the installation directory for object code libraries
|
and internal data files of GCC. The default is
|
and internal data files of GCC. The default is
|
`EXEC-PREFIX/lib'.
|
`EXEC-PREFIX/lib'.
|
|
|
`--libexecdir=DIRNAME'
|
`--libexecdir=DIRNAME'
|
Specify the installation directory for internal executables
|
Specify the installation directory for internal executables
|
of GCC. The default is `EXEC-PREFIX/libexec'.
|
of GCC. The default is `EXEC-PREFIX/libexec'.
|
|
|
`--with-slibdir=DIRNAME'
|
`--with-slibdir=DIRNAME'
|
Specify the installation directory for the shared libgcc
|
Specify the installation directory for the shared libgcc
|
library. The default is `LIBDIR'.
|
library. The default is `LIBDIR'.
|
|
|
`--infodir=DIRNAME'
|
`--infodir=DIRNAME'
|
Specify the installation directory for documentation in info
|
Specify the installation directory for documentation in info
|
format. The default is `PREFIX/info'.
|
format. The default is `PREFIX/info'.
|
|
|
`--datadir=DIRNAME'
|
`--datadir=DIRNAME'
|
Specify the installation directory for some
|
Specify the installation directory for some
|
architecture-independent data files referenced by GCC. The
|
architecture-independent data files referenced by GCC. The
|
default is `PREFIX/share'.
|
default is `PREFIX/share'.
|
|
|
`--mandir=DIRNAME'
|
`--mandir=DIRNAME'
|
Specify the installation directory for manual pages. The
|
Specify the installation directory for manual pages. The
|
default is `PREFIX/man'. (Note that the manual pages are
|
default is `PREFIX/man'. (Note that the manual pages are
|
only extracts from the full GCC manuals, which are provided
|
only extracts from the full GCC manuals, which are provided
|
in Texinfo format. The manpages are derived by an automatic
|
in Texinfo format. The manpages are derived by an automatic
|
conversion process from parts of the full manual.)
|
conversion process from parts of the full manual.)
|
|
|
`--with-gxx-include-dir=DIRNAME'
|
`--with-gxx-include-dir=DIRNAME'
|
Specify the installation directory for G++ header files. The
|
Specify the installation directory for G++ header files. The
|
default is `PREFIX/include/c++/VERSION'.
|
default is `PREFIX/include/c++/VERSION'.
|
|
|
|
|
`--program-prefix=PREFIX'
|
`--program-prefix=PREFIX'
|
GCC supports some transformations of the names of its programs when
|
GCC supports some transformations of the names of its programs when
|
installing them. This option prepends PREFIX to the names of
|
installing them. This option prepends PREFIX to the names of
|
programs to install in BINDIR (see above). For example, specifying
|
programs to install in BINDIR (see above). For example, specifying
|
`--program-prefix=foo-' would result in `gcc' being installed as
|
`--program-prefix=foo-' would result in `gcc' being installed as
|
`/usr/local/bin/foo-gcc'.
|
`/usr/local/bin/foo-gcc'.
|
|
|
`--program-suffix=SUFFIX'
|
`--program-suffix=SUFFIX'
|
Appends SUFFIX to the names of programs to install in BINDIR (see
|
Appends SUFFIX to the names of programs to install in BINDIR (see
|
above). For example, specifying `--program-suffix=-3.1' would
|
above). For example, specifying `--program-suffix=-3.1' would
|
result in `gcc' being installed as `/usr/local/bin/gcc-3.1'.
|
result in `gcc' being installed as `/usr/local/bin/gcc-3.1'.
|
|
|
`--program-transform-name=PATTERN'
|
`--program-transform-name=PATTERN'
|
Applies the `sed' script PATTERN to be applied to the names of
|
Applies the `sed' script PATTERN to be applied to the names of
|
programs to install in BINDIR (see above). PATTERN has to consist
|
programs to install in BINDIR (see above). PATTERN has to consist
|
of one or more basic `sed' editing commands, separated by
|
of one or more basic `sed' editing commands, separated by
|
semicolons. For example, if you want the `gcc' program name to be
|
semicolons. For example, if you want the `gcc' program name to be
|
transformed to the installed program `/usr/local/bin/myowngcc' and
|
transformed to the installed program `/usr/local/bin/myowngcc' and
|
the `g++' program name to be transformed to
|
the `g++' program name to be transformed to
|
`/usr/local/bin/gspecial++' without changing other program names,
|
`/usr/local/bin/gspecial++' without changing other program names,
|
you could use the pattern
|
you could use the pattern
|
`--program-transform-name='s/^gcc$/myowngcc/; s/^g++$/gspecial++/''
|
`--program-transform-name='s/^gcc$/myowngcc/; s/^g++$/gspecial++/''
|
to achieve this effect.
|
to achieve this effect.
|
|
|
All three options can be combined and used together, resulting in
|
All three options can be combined and used together, resulting in
|
more complex conversion patterns. As a basic rule, PREFIX (and
|
more complex conversion patterns. As a basic rule, PREFIX (and
|
SUFFIX) are prepended (appended) before further transformations
|
SUFFIX) are prepended (appended) before further transformations
|
can happen with a special transformation script PATTERN.
|
can happen with a special transformation script PATTERN.
|
|
|
As currently implemented, this option only takes effect for native
|
As currently implemented, this option only takes effect for native
|
builds; cross compiler binaries' names are not transformed even
|
builds; cross compiler binaries' names are not transformed even
|
when a transformation is explicitly asked for by one of these
|
when a transformation is explicitly asked for by one of these
|
options.
|
options.
|
|
|
For native builds, some of the installed programs are also
|
For native builds, some of the installed programs are also
|
installed with the target alias in front of their name, as in
|
installed with the target alias in front of their name, as in
|
`i686-pc-linux-gnu-gcc'. All of the above transformations happen
|
`i686-pc-linux-gnu-gcc'. All of the above transformations happen
|
before the target alias is prepended to the name--so, specifying
|
before the target alias is prepended to the name--so, specifying
|
`--program-prefix=foo-' and `program-suffix=-3.1', the resulting
|
`--program-prefix=foo-' and `program-suffix=-3.1', the resulting
|
binary would be installed as
|
binary would be installed as
|
`/usr/local/bin/i686-pc-linux-gnu-foo-gcc-3.1'.
|
`/usr/local/bin/i686-pc-linux-gnu-foo-gcc-3.1'.
|
|
|
As a last shortcoming, none of the installed Ada programs are
|
As a last shortcoming, none of the installed Ada programs are
|
transformed yet, which will be fixed in some time.
|
transformed yet, which will be fixed in some time.
|
|
|
`--with-local-prefix=DIRNAME'
|
`--with-local-prefix=DIRNAME'
|
Specify the installation directory for local include files. The
|
Specify the installation directory for local include files. The
|
default is `/usr/local'. Specify this option if you want the
|
default is `/usr/local'. Specify this option if you want the
|
compiler to search directory `DIRNAME/include' for locally
|
compiler to search directory `DIRNAME/include' for locally
|
installed header files _instead_ of `/usr/local/include'.
|
installed header files _instead_ of `/usr/local/include'.
|
|
|
You should specify `--with-local-prefix' *only* if your site has a
|
You should specify `--with-local-prefix' *only* if your site has a
|
different convention (not `/usr/local') for where to put
|
different convention (not `/usr/local') for where to put
|
site-specific files.
|
site-specific files.
|
|
|
The default value for `--with-local-prefix' is `/usr/local'
|
The default value for `--with-local-prefix' is `/usr/local'
|
regardless of the value of `--prefix'. Specifying `--prefix' has
|
regardless of the value of `--prefix'. Specifying `--prefix' has
|
no effect on which directory GCC searches for local header files.
|
no effect on which directory GCC searches for local header files.
|
This may seem counterintuitive, but actually it is logical.
|
This may seem counterintuitive, but actually it is logical.
|
|
|
The purpose of `--prefix' is to specify where to _install GCC_.
|
The purpose of `--prefix' is to specify where to _install GCC_.
|
The local header files in `/usr/local/include'--if you put any in
|
The local header files in `/usr/local/include'--if you put any in
|
that directory--are not part of GCC. They are part of other
|
that directory--are not part of GCC. They are part of other
|
programs--perhaps many others. (GCC installs its own header files
|
programs--perhaps many others. (GCC installs its own header files
|
in another directory which is based on the `--prefix' value.)
|
in another directory which is based on the `--prefix' value.)
|
|
|
Both the local-prefix include directory and the GCC-prefix include
|
Both the local-prefix include directory and the GCC-prefix include
|
directory are part of GCC's "system include" directories.
|
directory are part of GCC's "system include" directories.
|
Although these two directories are not fixed, they need to be
|
Although these two directories are not fixed, they need to be
|
searched in the proper order for the correct processing of the
|
searched in the proper order for the correct processing of the
|
include_next directive. The local-prefix include directory is
|
include_next directive. The local-prefix include directory is
|
searched before the GCC-prefix include directory. Another
|
searched before the GCC-prefix include directory. Another
|
characteristic of system include directories is that pedantic
|
characteristic of system include directories is that pedantic
|
warnings are turned off for headers in these directories.
|
warnings are turned off for headers in these directories.
|
|
|
Some autoconf macros add `-I DIRECTORY' options to the compiler
|
Some autoconf macros add `-I DIRECTORY' options to the compiler
|
command line, to ensure that directories containing installed
|
command line, to ensure that directories containing installed
|
packages' headers are searched. When DIRECTORY is one of GCC's
|
packages' headers are searched. When DIRECTORY is one of GCC's
|
system include directories, GCC will ignore the option so that
|
system include directories, GCC will ignore the option so that
|
system directories continue to be processed in the correct order.
|
system directories continue to be processed in the correct order.
|
This may result in a search order different from what was
|
This may result in a search order different from what was
|
specified but the directory will still be searched.
|
specified but the directory will still be searched.
|
|
|
GCC automatically searches for ordinary libraries using
|
GCC automatically searches for ordinary libraries using
|
`GCC_EXEC_PREFIX'. Thus, when the same installation prefix is
|
`GCC_EXEC_PREFIX'. Thus, when the same installation prefix is
|
used for both GCC and packages, GCC will automatically search for
|
used for both GCC and packages, GCC will automatically search for
|
both headers and libraries. This provides a configuration that is
|
both headers and libraries. This provides a configuration that is
|
easy to use. GCC behaves in a manner similar to that when it is
|
easy to use. GCC behaves in a manner similar to that when it is
|
installed as a system compiler in `/usr'.
|
installed as a system compiler in `/usr'.
|
|
|
Sites that need to install multiple versions of GCC may not want to
|
Sites that need to install multiple versions of GCC may not want to
|
use the above simple configuration. It is possible to use the
|
use the above simple configuration. It is possible to use the
|
`--program-prefix', `--program-suffix' and
|
`--program-prefix', `--program-suffix' and
|
`--program-transform-name' options to install multiple versions
|
`--program-transform-name' options to install multiple versions
|
into a single directory, but it may be simpler to use different
|
into a single directory, but it may be simpler to use different
|
prefixes and the `--with-local-prefix' option to specify the
|
prefixes and the `--with-local-prefix' option to specify the
|
location of the site-specific files for each version. It will
|
location of the site-specific files for each version. It will
|
then be necessary for users to specify explicitly the location of
|
then be necessary for users to specify explicitly the location of
|
local site libraries (e.g., with `LIBRARY_PATH').
|
local site libraries (e.g., with `LIBRARY_PATH').
|
|
|
The same value can be used for both `--with-local-prefix' and
|
The same value can be used for both `--with-local-prefix' and
|
`--prefix' provided it is not `/usr'. This can be used to avoid
|
`--prefix' provided it is not `/usr'. This can be used to avoid
|
the default search of `/usr/local/include'.
|
the default search of `/usr/local/include'.
|
|
|
*Do not* specify `/usr' as the `--with-local-prefix'! The
|
*Do not* specify `/usr' as the `--with-local-prefix'! The
|
directory you use for `--with-local-prefix' *must not* contain any
|
directory you use for `--with-local-prefix' *must not* contain any
|
of the system's standard header files. If it did contain them,
|
of the system's standard header files. If it did contain them,
|
certain programs would be miscompiled (including GNU Emacs, on
|
certain programs would be miscompiled (including GNU Emacs, on
|
certain targets), because this would override and nullify the
|
certain targets), because this would override and nullify the
|
header file corrections made by the `fixincludes' script.
|
header file corrections made by the `fixincludes' script.
|
|
|
Indications are that people who use this option use it based on
|
Indications are that people who use this option use it based on
|
mistaken ideas of what it is for. People use it as if it
|
mistaken ideas of what it is for. People use it as if it
|
specified where to install part of GCC. Perhaps they make this
|
specified where to install part of GCC. Perhaps they make this
|
assumption because installing GCC creates the directory.
|
assumption because installing GCC creates the directory.
|
|
|
`--enable-shared[=PACKAGE[,...]]'
|
`--enable-shared[=PACKAGE[,...]]'
|
Build shared versions of libraries, if shared libraries are
|
Build shared versions of libraries, if shared libraries are
|
supported on the target platform. Unlike GCC 2.95.x and earlier,
|
supported on the target platform. Unlike GCC 2.95.x and earlier,
|
shared libraries are enabled by default on all platforms that
|
shared libraries are enabled by default on all platforms that
|
support shared libraries.
|
support shared libraries.
|
|
|
If a list of packages is given as an argument, build shared
|
If a list of packages is given as an argument, build shared
|
libraries only for the listed packages. For other packages, only
|
libraries only for the listed packages. For other packages, only
|
static libraries will be built. Package names currently
|
static libraries will be built. Package names currently
|
recognized in the GCC tree are `libgcc' (also known as `gcc'),
|
recognized in the GCC tree are `libgcc' (also known as `gcc'),
|
`libstdc++' (not `libstdc++-v3'), `libffi', `zlib', `boehm-gc',
|
`libstdc++' (not `libstdc++-v3'), `libffi', `zlib', `boehm-gc',
|
`ada', `libada', `libjava' and `libobjc'. Note `libiberty' does
|
`ada', `libada', `libjava' and `libobjc'. Note `libiberty' does
|
not support shared libraries at all.
|
not support shared libraries at all.
|
|
|
Use `--disable-shared' to build only static libraries. Note that
|
Use `--disable-shared' to build only static libraries. Note that
|
`--disable-shared' does not accept a list of package names as
|
`--disable-shared' does not accept a list of package names as
|
argument, only `--enable-shared' does.
|
argument, only `--enable-shared' does.
|
|
|
`--with-gnu-as'
|
`--with-gnu-as'
|
Specify that the compiler should assume that the assembler it
|
Specify that the compiler should assume that the assembler it
|
finds is the GNU assembler. However, this does not modify the
|
finds is the GNU assembler. However, this does not modify the
|
rules to find an assembler and will result in confusion if the
|
rules to find an assembler and will result in confusion if the
|
assembler found is not actually the GNU assembler. (Confusion may
|
assembler found is not actually the GNU assembler. (Confusion may
|
also result if the compiler finds the GNU assembler but has not
|
also result if the compiler finds the GNU assembler but has not
|
been configured with `--with-gnu-as'.) If you have more than one
|
been configured with `--with-gnu-as'.) If you have more than one
|
assembler installed on your system, you may want to use this
|
assembler installed on your system, you may want to use this
|
option in connection with `--with-as=PATHNAME' or
|
option in connection with `--with-as=PATHNAME' or
|
`--with-build-time-tools=PATHNAME'.
|
`--with-build-time-tools=PATHNAME'.
|
|
|
The following systems are the only ones where it makes a difference
|
The following systems are the only ones where it makes a difference
|
whether you use the GNU assembler. On any other system,
|
whether you use the GNU assembler. On any other system,
|
`--with-gnu-as' has no effect.
|
`--with-gnu-as' has no effect.
|
|
|
* `hppa1.0-ANY-ANY'
|
* `hppa1.0-ANY-ANY'
|
|
|
* `hppa1.1-ANY-ANY'
|
* `hppa1.1-ANY-ANY'
|
|
|
* `i386-ANY-sysv'
|
* `i386-ANY-sysv'
|
|
|
* `m68k-bull-sysv'
|
* `m68k-bull-sysv'
|
|
|
* `m68k-hp-hpux'
|
* `m68k-hp-hpux'
|
|
|
* `m68000-hp-hpux'
|
* `m68000-hp-hpux'
|
|
|
* `m68000-att-sysv'
|
* `m68000-att-sysv'
|
|
|
* `sparc-sun-solaris2.ANY'
|
* `sparc-sun-solaris2.ANY'
|
|
|
* `sparc64-ANY-solaris2.ANY'
|
* `sparc64-ANY-solaris2.ANY'
|
|
|
On the systems listed above (except for the HP-PA, the SPARC, for
|
On the systems listed above (except for the HP-PA, the SPARC, for
|
ISC on the 386, if you use the GNU assembler, you should also use
|
ISC on the 386, if you use the GNU assembler, you should also use
|
the GNU linker (and specify `--with-gnu-ld').
|
the GNU linker (and specify `--with-gnu-ld').
|
|
|
`--with-as=PATHNAME'
|
`--with-as=PATHNAME'
|
Specify that the compiler should use the assembler pointed to by
|
Specify that the compiler should use the assembler pointed to by
|
PATHNAME, rather than the one found by the standard rules to find
|
PATHNAME, rather than the one found by the standard rules to find
|
an assembler, which are:
|
an assembler, which are:
|
* Unless GCC is being built with a cross compiler, check the
|
* Unless GCC is being built with a cross compiler, check the
|
`LIBEXEC/gcc/TARGET/VERSION' directory. LIBEXEC defaults to
|
`LIBEXEC/gcc/TARGET/VERSION' directory. LIBEXEC defaults to
|
`EXEC-PREFIX/libexec'; EXEC-PREFIX defaults to PREFIX, which
|
`EXEC-PREFIX/libexec'; EXEC-PREFIX defaults to PREFIX, which
|
defaults to `/usr/local' unless overridden by the
|
defaults to `/usr/local' unless overridden by the
|
`--prefix=PATHNAME' switch described above. TARGET is the
|
`--prefix=PATHNAME' switch described above. TARGET is the
|
target system triple, such as `sparc-sun-solaris2.7', and
|
target system triple, such as `sparc-sun-solaris2.7', and
|
VERSION denotes the GCC version, such as 3.0.
|
VERSION denotes the GCC version, such as 3.0.
|
|
|
* If the target system is the same that you are building on,
|
* If the target system is the same that you are building on,
|
check operating system specific directories (e.g.
|
check operating system specific directories (e.g.
|
`/usr/ccs/bin' on Sun Solaris 2).
|
`/usr/ccs/bin' on Sun Solaris 2).
|
|
|
* Check in the `PATH' for a tool whose name is prefixed by the
|
* Check in the `PATH' for a tool whose name is prefixed by the
|
target system triple.
|
target system triple.
|
|
|
* Check in the `PATH' for a tool whose name is not prefixed by
|
* Check in the `PATH' for a tool whose name is not prefixed by
|
the target system triple, if the host and target system
|
the target system triple, if the host and target system
|
triple are the same (in other words, we use a host tool if it
|
triple are the same (in other words, we use a host tool if it
|
can be used for the target as well).
|
can be used for the target as well).
|
|
|
You may want to use `--with-as' if no assembler is installed in
|
You may want to use `--with-as' if no assembler is installed in
|
the directories listed above, or if you have multiple assemblers
|
the directories listed above, or if you have multiple assemblers
|
installed and want to choose one that is not found by the above
|
installed and want to choose one that is not found by the above
|
rules.
|
rules.
|
|
|
`--with-gnu-ld'
|
`--with-gnu-ld'
|
Same as `--with-gnu-as' but for the linker.
|
Same as `--with-gnu-as' but for the linker.
|
|
|
`--with-ld=PATHNAME'
|
`--with-ld=PATHNAME'
|
Same as `--with-as' but for the linker.
|
Same as `--with-as' but for the linker.
|
|
|
`--with-stabs'
|
`--with-stabs'
|
Specify that stabs debugging information should be used instead of
|
Specify that stabs debugging information should be used instead of
|
whatever format the host normally uses. Normally GCC uses the
|
whatever format the host normally uses. Normally GCC uses the
|
same debug format as the host system.
|
same debug format as the host system.
|
|
|
On MIPS based systems and on Alphas, you must specify whether you
|
On MIPS based systems and on Alphas, you must specify whether you
|
want GCC to create the normal ECOFF debugging format, or to use
|
want GCC to create the normal ECOFF debugging format, or to use
|
BSD-style stabs passed through the ECOFF symbol table. The normal
|
BSD-style stabs passed through the ECOFF symbol table. The normal
|
ECOFF debug format cannot fully handle languages other than C.
|
ECOFF debug format cannot fully handle languages other than C.
|
BSD stabs format can handle other languages, but it only works
|
BSD stabs format can handle other languages, but it only works
|
with the GNU debugger GDB.
|
with the GNU debugger GDB.
|
|
|
Normally, GCC uses the ECOFF debugging format by default; if you
|
Normally, GCC uses the ECOFF debugging format by default; if you
|
prefer BSD stabs, specify `--with-stabs' when you configure GCC.
|
prefer BSD stabs, specify `--with-stabs' when you configure GCC.
|
|
|
No matter which default you choose when you configure GCC, the user
|
No matter which default you choose when you configure GCC, the user
|
can use the `-gcoff' and `-gstabs+' options to specify explicitly
|
can use the `-gcoff' and `-gstabs+' options to specify explicitly
|
the debug format for a particular compilation.
|
the debug format for a particular compilation.
|
|
|
`--with-stabs' is meaningful on the ISC system on the 386, also, if
|
`--with-stabs' is meaningful on the ISC system on the 386, also, if
|
`--with-gas' is used. It selects use of stabs debugging
|
`--with-gas' is used. It selects use of stabs debugging
|
information embedded in COFF output. This kind of debugging
|
information embedded in COFF output. This kind of debugging
|
information supports C++ well; ordinary COFF debugging information
|
information supports C++ well; ordinary COFF debugging information
|
does not.
|
does not.
|
|
|
`--with-stabs' is also meaningful on 386 systems running SVR4. It
|
`--with-stabs' is also meaningful on 386 systems running SVR4. It
|
selects use of stabs debugging information embedded in ELF output.
|
selects use of stabs debugging information embedded in ELF output.
|
The C++ compiler currently (2.6.0) does not support the DWARF
|
The C++ compiler currently (2.6.0) does not support the DWARF
|
debugging information normally used on 386 SVR4 platforms; stabs
|
debugging information normally used on 386 SVR4 platforms; stabs
|
provide a workable alternative. This requires gas and gdb, as the
|
provide a workable alternative. This requires gas and gdb, as the
|
normal SVR4 tools can not generate or interpret stabs.
|
normal SVR4 tools can not generate or interpret stabs.
|
|
|
`--disable-multilib'
|
`--disable-multilib'
|
Specify that multiple target libraries to support different target
|
Specify that multiple target libraries to support different target
|
variants, calling conventions, etc. should not be built. The
|
variants, calling conventions, etc. should not be built. The
|
default is to build a predefined set of them.
|
default is to build a predefined set of them.
|
|
|
Some targets provide finer-grained control over which multilibs
|
Some targets provide finer-grained control over which multilibs
|
are built (e.g., `--disable-softfloat'):
|
are built (e.g., `--disable-softfloat'):
|
`arc-*-elf*'
|
`arc-*-elf*'
|
biendian.
|
biendian.
|
|
|
`arm-*-*'
|
`arm-*-*'
|
fpu, 26bit, underscore, interwork, biendian, nofmult.
|
fpu, 26bit, underscore, interwork, biendian, nofmult.
|
|
|
`m68*-*-*'
|
`m68*-*-*'
|
softfloat, m68881, m68000, m68020.
|
softfloat, m68881, m68000, m68020.
|
|
|
`mips*-*-*'
|
`mips*-*-*'
|
single-float, biendian, softfloat.
|
single-float, biendian, softfloat.
|
|
|
`powerpc*-*-*, rs6000*-*-*'
|
`powerpc*-*-*, rs6000*-*-*'
|
aix64, pthread, softfloat, powercpu, powerpccpu, powerpcos,
|
aix64, pthread, softfloat, powercpu, powerpccpu, powerpcos,
|
biendian, sysv, aix.
|
biendian, sysv, aix.
|
|
|
|
|
`--enable-threads'
|
`--enable-threads'
|
Specify that the target supports threads. This affects the
|
Specify that the target supports threads. This affects the
|
Objective-C compiler and runtime library, and exception handling
|
Objective-C compiler and runtime library, and exception handling
|
for other languages like C++ and Java. On some systems, this is
|
for other languages like C++ and Java. On some systems, this is
|
the default.
|
the default.
|
|
|
In general, the best (and, in many cases, the only known) threading
|
In general, the best (and, in many cases, the only known) threading
|
model available will be configured for use. Beware that on some
|
model available will be configured for use. Beware that on some
|
systems, GCC has not been taught what threading models are
|
systems, GCC has not been taught what threading models are
|
generally available for the system. In this case,
|
generally available for the system. In this case,
|
`--enable-threads' is an alias for `--enable-threads=single'.
|
`--enable-threads' is an alias for `--enable-threads=single'.
|
|
|
`--disable-threads'
|
`--disable-threads'
|
Specify that threading support should be disabled for the system.
|
Specify that threading support should be disabled for the system.
|
This is an alias for `--enable-threads=single'.
|
This is an alias for `--enable-threads=single'.
|
|
|
`--enable-threads=LIB'
|
`--enable-threads=LIB'
|
Specify that LIB is the thread support library. This affects the
|
Specify that LIB is the thread support library. This affects the
|
Objective-C compiler and runtime library, and exception handling
|
Objective-C compiler and runtime library, and exception handling
|
for other languages like C++ and Java. The possibilities for LIB
|
for other languages like C++ and Java. The possibilities for LIB
|
are:
|
are:
|
|
|
`aix'
|
`aix'
|
AIX thread support.
|
AIX thread support.
|
|
|
`dce'
|
`dce'
|
DCE thread support.
|
DCE thread support.
|
|
|
`gnat'
|
`gnat'
|
Ada tasking support. For non-Ada programs, this setting is
|
Ada tasking support. For non-Ada programs, this setting is
|
equivalent to `single'. When used in conjunction with the
|
equivalent to `single'. When used in conjunction with the
|
Ada run time, it causes GCC to use the same thread primitives
|
Ada run time, it causes GCC to use the same thread primitives
|
as Ada uses. This option is necessary when using both Ada
|
as Ada uses. This option is necessary when using both Ada
|
and the back end exception handling, which is the default for
|
and the back end exception handling, which is the default for
|
most Ada targets.
|
most Ada targets.
|
|
|
`mach'
|
`mach'
|
Generic MACH thread support, known to work on NeXTSTEP.
|
Generic MACH thread support, known to work on NeXTSTEP.
|
(Please note that the file needed to support this
|
(Please note that the file needed to support this
|
configuration, `gthr-mach.h', is missing and thus this
|
configuration, `gthr-mach.h', is missing and thus this
|
setting will cause a known bootstrap failure.)
|
setting will cause a known bootstrap failure.)
|
|
|
`no'
|
`no'
|
This is an alias for `single'.
|
This is an alias for `single'.
|
|
|
`posix'
|
`posix'
|
Generic POSIX/Unix98 thread support.
|
Generic POSIX/Unix98 thread support.
|
|
|
`posix95'
|
`posix95'
|
Generic POSIX/Unix95 thread support.
|
Generic POSIX/Unix95 thread support.
|
|
|
`rtems'
|
`rtems'
|
RTEMS thread support.
|
RTEMS thread support.
|
|
|
`single'
|
`single'
|
Disable thread support, should work for all platforms.
|
Disable thread support, should work for all platforms.
|
|
|
`solaris'
|
`solaris'
|
Sun Solaris 2 thread support.
|
Sun Solaris 2 thread support.
|
|
|
`vxworks'
|
`vxworks'
|
VxWorks thread support.
|
VxWorks thread support.
|
|
|
`win32'
|
`win32'
|
Microsoft Win32 API thread support.
|
Microsoft Win32 API thread support.
|
|
|
`nks'
|
`nks'
|
Novell Kernel Services thread support.
|
Novell Kernel Services thread support.
|
|
|
`--enable-tls'
|
`--enable-tls'
|
Specify that the target supports TLS (Thread Local Storage).
|
Specify that the target supports TLS (Thread Local Storage).
|
Usually configure can correctly determine if TLS is supported. In
|
Usually configure can correctly determine if TLS is supported. In
|
cases where it guesses incorrectly, TLS can be explicitly enabled
|
cases where it guesses incorrectly, TLS can be explicitly enabled
|
or disabled with `--enable-tls' or `--disable-tls'. This can
|
or disabled with `--enable-tls' or `--disable-tls'. This can
|
happen if the assembler supports TLS but the C library does not,
|
happen if the assembler supports TLS but the C library does not,
|
or if the assumptions made by the configure test are incorrect.
|
or if the assumptions made by the configure test are incorrect.
|
|
|
`--disable-tls'
|
`--disable-tls'
|
Specify that the target does not support TLS. This is an alias
|
Specify that the target does not support TLS. This is an alias
|
for `--enable-tls=no'.
|
for `--enable-tls=no'.
|
|
|
`--with-cpu=CPU'
|
`--with-cpu=CPU'
|
Specify which cpu variant the compiler should generate code for by
|
Specify which cpu variant the compiler should generate code for by
|
default. CPU will be used as the default value of the `-mcpu='
|
default. CPU will be used as the default value of the `-mcpu='
|
switch. This option is only supported on some targets, including
|
switch. This option is only supported on some targets, including
|
ARM, i386, PowerPC, and SPARC.
|
ARM, i386, PowerPC, and SPARC.
|
|
|
`--with-schedule=CPU'
|
`--with-schedule=CPU'
|
`--with-arch=CPU'
|
`--with-arch=CPU'
|
`--with-tune=CPU'
|
`--with-tune=CPU'
|
`--with-abi=ABI'
|
`--with-abi=ABI'
|
`--with-fpu=TYPE'
|
`--with-fpu=TYPE'
|
`--with-float=TYPE'
|
`--with-float=TYPE'
|
These configure options provide default values for the
|
These configure options provide default values for the
|
`-mschedule=', `-march=', `-mtune=', `-mabi=', and `-mfpu='
|
`-mschedule=', `-march=', `-mtune=', `-mabi=', and `-mfpu='
|
options and for `-mhard-float' or `-msoft-float'. As with
|
options and for `-mhard-float' or `-msoft-float'. As with
|
`--with-cpu', which switches will be accepted and acceptable values
|
`--with-cpu', which switches will be accepted and acceptable values
|
of the arguments depend on the target.
|
of the arguments depend on the target.
|
|
|
`--with-mode=MODE'
|
`--with-mode=MODE'
|
Specify if the compiler should default to `-marm' or `-mthumb'.
|
Specify if the compiler should default to `-marm' or `-mthumb'.
|
This option is only supported on ARM targets.
|
This option is only supported on ARM targets.
|
|
|
`--with-divide=TYPE'
|
`--with-divide=TYPE'
|
Specify how the compiler should generate code for checking for
|
Specify how the compiler should generate code for checking for
|
division by zero. This option is only supported on the MIPS
|
division by zero. This option is only supported on the MIPS
|
target. The possibilities for TYPE are:
|
target. The possibilities for TYPE are:
|
`traps'
|
`traps'
|
Division by zero checks use conditional traps (this is the
|
Division by zero checks use conditional traps (this is the
|
default on systems that support conditional traps).
|
default on systems that support conditional traps).
|
|
|
`breaks'
|
`breaks'
|
Division by zero checks use the break instruction.
|
Division by zero checks use the break instruction.
|
|
|
`--enable-__cxa_atexit'
|
`--enable-__cxa_atexit'
|
Define if you want to use __cxa_atexit, rather than atexit, to
|
Define if you want to use __cxa_atexit, rather than atexit, to
|
register C++ destructors for local statics and global objects.
|
register C++ destructors for local statics and global objects.
|
This is essential for fully standards-compliant handling of
|
This is essential for fully standards-compliant handling of
|
destructors, but requires __cxa_atexit in libc. This option is
|
destructors, but requires __cxa_atexit in libc. This option is
|
currently only available on systems with GNU libc. When enabled,
|
currently only available on systems with GNU libc. When enabled,
|
this will cause `-fuse-cxa-exit' to be passed by default.
|
this will cause `-fuse-cxa-exit' to be passed by default.
|
|
|
`--enable-target-optspace'
|
`--enable-target-optspace'
|
Specify that target libraries should be optimized for code space
|
Specify that target libraries should be optimized for code space
|
instead of code speed. This is the default for the m32r platform.
|
instead of code speed. This is the default for the m32r platform.
|
|
|
`--disable-cpp'
|
`--disable-cpp'
|
Specify that a user visible `cpp' program should not be installed.
|
Specify that a user visible `cpp' program should not be installed.
|
|
|
`--with-cpp-install-dir=DIRNAME'
|
`--with-cpp-install-dir=DIRNAME'
|
Specify that the user visible `cpp' program should be installed in
|
Specify that the user visible `cpp' program should be installed in
|
`PREFIX/DIRNAME/cpp', in addition to BINDIR.
|
`PREFIX/DIRNAME/cpp', in addition to BINDIR.
|
|
|
`--enable-initfini-array'
|
`--enable-initfini-array'
|
Force the use of sections `.init_array' and `.fini_array' (instead
|
Force the use of sections `.init_array' and `.fini_array' (instead
|
of `.init' and `.fini') for constructors and destructors. Option
|
of `.init' and `.fini') for constructors and destructors. Option
|
`--disable-initfini-array' has the opposite effect. If neither
|
`--disable-initfini-array' has the opposite effect. If neither
|
option is specified, the configure script will try to guess
|
option is specified, the configure script will try to guess
|
whether the `.init_array' and `.fini_array' sections are supported
|
whether the `.init_array' and `.fini_array' sections are supported
|
and, if they are, use them.
|
and, if they are, use them.
|
|
|
`--enable-maintainer-mode'
|
`--enable-maintainer-mode'
|
The build rules that regenerate the GCC master message catalog
|
The build rules that regenerate the GCC master message catalog
|
`gcc.pot' are normally disabled. This is because it can only be
|
`gcc.pot' are normally disabled. This is because it can only be
|
rebuilt if the complete source tree is present. If you have
|
rebuilt if the complete source tree is present. If you have
|
changed the sources and want to rebuild the catalog, configuring
|
changed the sources and want to rebuild the catalog, configuring
|
with `--enable-maintainer-mode' will enable this. Note that you
|
with `--enable-maintainer-mode' will enable this. Note that you
|
need a recent version of the `gettext' tools to do so.
|
need a recent version of the `gettext' tools to do so.
|
|
|
`--disable-bootstrap'
|
`--disable-bootstrap'
|
For a native build, the default configuration is to perform a
|
For a native build, the default configuration is to perform a
|
3-stage bootstrap of the compiler when `make' is invoked, testing
|
3-stage bootstrap of the compiler when `make' is invoked, testing
|
that GCC can compile itself correctly. If you want to disable
|
that GCC can compile itself correctly. If you want to disable
|
this process, you can configure with `--disable-bootstrap'.
|
this process, you can configure with `--disable-bootstrap'.
|
|
|
`--enable-bootstrap'
|
`--enable-bootstrap'
|
In special cases, you may want to perform a 3-stage build even if
|
In special cases, you may want to perform a 3-stage build even if
|
the target and host triplets are different. This could happen
|
the target and host triplets are different. This could happen
|
when the host can run code compiled for the target (e.g. host is
|
when the host can run code compiled for the target (e.g. host is
|
i686-linux, target is i486-linux). Starting from GCC 4.2, to do
|
i686-linux, target is i486-linux). Starting from GCC 4.2, to do
|
this you have to configure explicitly with `--enable-bootstrap'.
|
this you have to configure explicitly with `--enable-bootstrap'.
|
|
|
`--enable-generated-files-in-srcdir'
|
`--enable-generated-files-in-srcdir'
|
Neither the .c and .h files that are generated from Bison and flex
|
Neither the .c and .h files that are generated from Bison and flex
|
nor the info manuals and man pages that are built from the .texi
|
nor the info manuals and man pages that are built from the .texi
|
files are present in the SVN development tree. When building GCC
|
files are present in the SVN development tree. When building GCC
|
from that development tree, or from one of our snapshots, those
|
from that development tree, or from one of our snapshots, those
|
generated files are placed in your build directory, which allows
|
generated files are placed in your build directory, which allows
|
for the source to be in a readonly directory.
|
for the source to be in a readonly directory.
|
|
|
If you configure with `--enable-generated-files-in-srcdir' then
|
If you configure with `--enable-generated-files-in-srcdir' then
|
those generated files will go into the source directory. This is
|
those generated files will go into the source directory. This is
|
mainly intended for generating release or prerelease tarballs of
|
mainly intended for generating release or prerelease tarballs of
|
the GCC sources, since it is not a requirement that the users of
|
the GCC sources, since it is not a requirement that the users of
|
source releases to have flex, Bison, or makeinfo.
|
source releases to have flex, Bison, or makeinfo.
|
|
|
`--enable-version-specific-runtime-libs'
|
`--enable-version-specific-runtime-libs'
|
Specify that runtime libraries should be installed in the compiler
|
Specify that runtime libraries should be installed in the compiler
|
specific subdirectory (`LIBDIR/gcc') rather than the usual places.
|
specific subdirectory (`LIBDIR/gcc') rather than the usual places.
|
In addition, `libstdc++''s include files will be installed into
|
In addition, `libstdc++''s include files will be installed into
|
`LIBDIR' unless you overruled it by using
|
`LIBDIR' unless you overruled it by using
|
`--with-gxx-include-dir=DIRNAME'. Using this option is
|
`--with-gxx-include-dir=DIRNAME'. Using this option is
|
particularly useful if you intend to use several versions of GCC in
|
particularly useful if you intend to use several versions of GCC in
|
parallel. This is currently supported by `libgfortran',
|
parallel. This is currently supported by `libgfortran',
|
`libjava', `libmudflap', `libstdc++', and `libobjc'.
|
`libjava', `libmudflap', `libstdc++', and `libobjc'.
|
|
|
`--with-java-home=DIRNAME'
|
`--with-java-home=DIRNAME'
|
This `libjava' option overrides the default value of the
|
This `libjava' option overrides the default value of the
|
`java.home' system property. It is also used to set
|
`java.home' system property. It is also used to set
|
`sun.boot.class.path' to `DIRNAME/lib/rt.jar'. By default
|
`sun.boot.class.path' to `DIRNAME/lib/rt.jar'. By default
|
`java.home' is set to `PREFIX' and `sun.boot.class.path' to
|
`java.home' is set to `PREFIX' and `sun.boot.class.path' to
|
`DATADIR/java/libgcj-VERSION.jar'.
|
`DATADIR/java/libgcj-VERSION.jar'.
|
|
|
`--enable-languages=LANG1,LANG2,...'
|
`--enable-languages=LANG1,LANG2,...'
|
Specify that only a particular subset of compilers and their
|
Specify that only a particular subset of compilers and their
|
runtime libraries should be built. For a list of valid values for
|
runtime libraries should be built. For a list of valid values for
|
LANGN you can issue the following command in the `gcc' directory
|
LANGN you can issue the following command in the `gcc' directory
|
of your GCC source tree:
|
of your GCC source tree:
|
grep language= */config-lang.in
|
grep language= */config-lang.in
|
Currently, you can use any of the following: `all', `ada', `c',
|
Currently, you can use any of the following: `all', `ada', `c',
|
`c++', `fortran', `java', `objc', `obj-c++', `treelang'. Building
|
`c++', `fortran', `java', `objc', `obj-c++', `treelang'. Building
|
the Ada compiler has special requirements, see below. If you do
|
the Ada compiler has special requirements, see below. If you do
|
not pass this flag, or specify the option `all', then all default
|
not pass this flag, or specify the option `all', then all default
|
languages available in the `gcc' sub-tree will be configured.
|
languages available in the `gcc' sub-tree will be configured.
|
Ada, Objective-C++, and treelang are not default languages; the
|
Ada, Objective-C++, and treelang are not default languages; the
|
rest are. Re-defining `LANGUAGES' when calling `make' *does not*
|
rest are. Re-defining `LANGUAGES' when calling `make' *does not*
|
work anymore, as those language sub-directories might not have been
|
work anymore, as those language sub-directories might not have been
|
configured!
|
configured!
|
|
|
`--disable-libada'
|
`--disable-libada'
|
Specify that the run-time libraries and tools used by GNAT should
|
Specify that the run-time libraries and tools used by GNAT should
|
not be built. This can be useful for debugging, or for
|
not be built. This can be useful for debugging, or for
|
compatibility with previous Ada build procedures, when it was
|
compatibility with previous Ada build procedures, when it was
|
required to explicitly do a `make -C gcc gnatlib_and_tools'.
|
required to explicitly do a `make -C gcc gnatlib_and_tools'.
|
|
|
`--disable-libssp'
|
`--disable-libssp'
|
Specify that the run-time libraries for stack smashing protection
|
Specify that the run-time libraries for stack smashing protection
|
should not be built.
|
should not be built.
|
|
|
`--disable-libgomp'
|
`--disable-libgomp'
|
Specify that the run-time libraries used by GOMP should not be
|
Specify that the run-time libraries used by GOMP should not be
|
built.
|
built.
|
|
|
`--with-dwarf2'
|
`--with-dwarf2'
|
Specify that the compiler should use DWARF 2 debugging information
|
Specify that the compiler should use DWARF 2 debugging information
|
as the default.
|
as the default.
|
|
|
`--enable-targets=all'
|
`--enable-targets=all'
|
`--enable-targets=TARGET_LIST'
|
`--enable-targets=TARGET_LIST'
|
Some GCC targets, e.g. powerpc64-linux, build bi-arch compilers.
|
Some GCC targets, e.g. powerpc64-linux, build bi-arch compilers.
|
These are compilers that are able to generate either 64-bit or
|
These are compilers that are able to generate either 64-bit or
|
32-bit code. Typically, the corresponding 32-bit target, e.g.
|
32-bit code. Typically, the corresponding 32-bit target, e.g.
|
powerpc-linux for powerpc64-linux, only generates 32-bit code.
|
powerpc-linux for powerpc64-linux, only generates 32-bit code.
|
This option enables the 32-bit target to be a bi-arch compiler,
|
This option enables the 32-bit target to be a bi-arch compiler,
|
which is useful when you want a bi-arch compiler that defaults to
|
which is useful when you want a bi-arch compiler that defaults to
|
32-bit, and you are building a bi-arch or multi-arch binutils in a
|
32-bit, and you are building a bi-arch or multi-arch binutils in a
|
combined tree. Currently, this option only affects powerpc-linux.
|
combined tree. Currently, this option only affects powerpc-linux.
|
|
|
`--enable-secureplt'
|
`--enable-secureplt'
|
This option enables `-msecure-plt' by default for powerpc-linux.
|
This option enables `-msecure-plt' by default for powerpc-linux.
|
*Note RS/6000 and PowerPC Options: (gcc)RS/6000 and PowerPC
|
*Note RS/6000 and PowerPC Options: (gcc)RS/6000 and PowerPC
|
Options,
|
Options,
|
|
|
`--enable-win32-registry'
|
`--enable-win32-registry'
|
`--enable-win32-registry=KEY'
|
`--enable-win32-registry=KEY'
|
`--disable-win32-registry'
|
`--disable-win32-registry'
|
The `--enable-win32-registry' option enables Microsoft
|
The `--enable-win32-registry' option enables Microsoft
|
Windows-hosted GCC to look up installations paths in the registry
|
Windows-hosted GCC to look up installations paths in the registry
|
using the following key:
|
using the following key:
|
|
|
`HKEY_LOCAL_MACHINE\SOFTWARE\Free Software Foundation\KEY'
|
`HKEY_LOCAL_MACHINE\SOFTWARE\Free Software Foundation\KEY'
|
|
|
KEY defaults to GCC version number, and can be overridden by the
|
KEY defaults to GCC version number, and can be overridden by the
|
`--enable-win32-registry=KEY' option. Vendors and distributors
|
`--enable-win32-registry=KEY' option. Vendors and distributors
|
who use custom installers are encouraged to provide a different
|
who use custom installers are encouraged to provide a different
|
key, perhaps one comprised of vendor name and GCC version number,
|
key, perhaps one comprised of vendor name and GCC version number,
|
to avoid conflict with existing installations. This feature is
|
to avoid conflict with existing installations. This feature is
|
enabled by default, and can be disabled by
|
enabled by default, and can be disabled by
|
`--disable-win32-registry' option. This option has no effect on
|
`--disable-win32-registry' option. This option has no effect on
|
the other hosts.
|
the other hosts.
|
|
|
`--nfp'
|
`--nfp'
|
Specify that the machine does not have a floating point unit. This
|
Specify that the machine does not have a floating point unit. This
|
option only applies to `m68k-sun-sunosN'. On any other system,
|
option only applies to `m68k-sun-sunosN'. On any other system,
|
`--nfp' has no effect.
|
`--nfp' has no effect.
|
|
|
`--enable-werror'
|
`--enable-werror'
|
`--disable-werror'
|
`--disable-werror'
|
`--enable-werror=yes'
|
`--enable-werror=yes'
|
`--enable-werror=no'
|
`--enable-werror=no'
|
When you specify this option, it controls whether certain files in
|
When you specify this option, it controls whether certain files in
|
the compiler are built with `-Werror' in bootstrap stage2 and
|
the compiler are built with `-Werror' in bootstrap stage2 and
|
later. If you don't specify it, `-Werror' is turned on for the
|
later. If you don't specify it, `-Werror' is turned on for the
|
main development trunk. However it defaults to off for release
|
main development trunk. However it defaults to off for release
|
branches and final releases. The specific files which get
|
branches and final releases. The specific files which get
|
`-Werror' are controlled by the Makefiles.
|
`-Werror' are controlled by the Makefiles.
|
|
|
`--enable-checking'
|
`--enable-checking'
|
`--enable-checking=LIST'
|
`--enable-checking=LIST'
|
When you specify this option, the compiler is built to perform
|
When you specify this option, the compiler is built to perform
|
internal consistency checks of the requested complexity. This
|
internal consistency checks of the requested complexity. This
|
does not change the generated code, but adds error checking within
|
does not change the generated code, but adds error checking within
|
the compiler. This will slow down the compiler and may only work
|
the compiler. This will slow down the compiler and may only work
|
properly if you are building the compiler with GCC. This is `yes'
|
properly if you are building the compiler with GCC. This is `yes'
|
by default when building from SVN or snapshots, but `release' for
|
by default when building from SVN or snapshots, but `release' for
|
releases. More control over the checks may be had by specifying
|
releases. More control over the checks may be had by specifying
|
LIST. The categories of checks available are `yes' (most common
|
LIST. The categories of checks available are `yes' (most common
|
checks `assert,misc,tree,gc,rtlflag,runtime'), `no' (no checks at
|
checks `assert,misc,tree,gc,rtlflag,runtime'), `no' (no checks at
|
all), `all' (all but `valgrind'), `release' (cheapest checks
|
all), `all' (all but `valgrind'), `release' (cheapest checks
|
`assert,runtime') or `none' (same as `no'). Individual checks can
|
`assert,runtime') or `none' (same as `no'). Individual checks can
|
be enabled with these flags `assert', `fold', `gc', `gcac' `misc',
|
be enabled with these flags `assert', `fold', `gc', `gcac' `misc',
|
`rtl', `rtlflag', `runtime', `tree', and `valgrind'.
|
`rtl', `rtlflag', `runtime', `tree', and `valgrind'.
|
|
|
The `valgrind' check requires the external `valgrind' simulator,
|
The `valgrind' check requires the external `valgrind' simulator,
|
available from `http://valgrind.org/'. The `rtl', `gcac' and
|
available from `http://valgrind.org/'. The `rtl', `gcac' and
|
`valgrind' checks are very expensive. To disable all checking,
|
`valgrind' checks are very expensive. To disable all checking,
|
`--disable-checking' or `--enable-checking=none' must be
|
`--disable-checking' or `--enable-checking=none' must be
|
explicitly requested. Disabling assertions will make the compiler
|
explicitly requested. Disabling assertions will make the compiler
|
and runtime slightly faster but increase the risk of undetected
|
and runtime slightly faster but increase the risk of undetected
|
internal errors causing wrong code to be generated.
|
internal errors causing wrong code to be generated.
|
|
|
`--enable-coverage'
|
`--enable-coverage'
|
`--enable-coverage=LEVEL'
|
`--enable-coverage=LEVEL'
|
With this option, the compiler is built to collect self coverage
|
With this option, the compiler is built to collect self coverage
|
information, every time it is run. This is for internal
|
information, every time it is run. This is for internal
|
development purposes, and only works when the compiler is being
|
development purposes, and only works when the compiler is being
|
built with gcc. The LEVEL argument controls whether the compiler
|
built with gcc. The LEVEL argument controls whether the compiler
|
is built optimized or not, values are `opt' and `noopt'. For
|
is built optimized or not, values are `opt' and `noopt'. For
|
coverage analysis you want to disable optimization, for
|
coverage analysis you want to disable optimization, for
|
performance analysis you want to enable optimization. When
|
performance analysis you want to enable optimization. When
|
coverage is enabled, the default level is without optimization.
|
coverage is enabled, the default level is without optimization.
|
|
|
`--enable-gather-detailed-mem-stats'
|
`--enable-gather-detailed-mem-stats'
|
When this option is specified more detailed information on memory
|
When this option is specified more detailed information on memory
|
allocation is gathered. This information is printed when using
|
allocation is gathered. This information is printed when using
|
`-fmem-report'.
|
`-fmem-report'.
|
|
|
`--with-gc'
|
`--with-gc'
|
`--with-gc=CHOICE'
|
`--with-gc=CHOICE'
|
With this option you can specify the garbage collector
|
With this option you can specify the garbage collector
|
implementation used during the compilation process. CHOICE can be
|
implementation used during the compilation process. CHOICE can be
|
one of `page' and `zone', where `page' is the default.
|
one of `page' and `zone', where `page' is the default.
|
|
|
`--enable-nls'
|
`--enable-nls'
|
`--disable-nls'
|
`--disable-nls'
|
The `--enable-nls' option enables Native Language Support (NLS),
|
The `--enable-nls' option enables Native Language Support (NLS),
|
which lets GCC output diagnostics in languages other than American
|
which lets GCC output diagnostics in languages other than American
|
English. Native Language Support is enabled by default if not
|
English. Native Language Support is enabled by default if not
|
doing a canadian cross build. The `--disable-nls' option disables
|
doing a canadian cross build. The `--disable-nls' option disables
|
NLS.
|
NLS.
|
|
|
`--with-included-gettext'
|
`--with-included-gettext'
|
If NLS is enabled, the `--with-included-gettext' option causes the
|
If NLS is enabled, the `--with-included-gettext' option causes the
|
build procedure to prefer its copy of GNU `gettext'.
|
build procedure to prefer its copy of GNU `gettext'.
|
|
|
`--with-catgets'
|
`--with-catgets'
|
If NLS is enabled, and if the host lacks `gettext' but has the
|
If NLS is enabled, and if the host lacks `gettext' but has the
|
inferior `catgets' interface, the GCC build procedure normally
|
inferior `catgets' interface, the GCC build procedure normally
|
ignores `catgets' and instead uses GCC's copy of the GNU `gettext'
|
ignores `catgets' and instead uses GCC's copy of the GNU `gettext'
|
library. The `--with-catgets' option causes the build procedure
|
library. The `--with-catgets' option causes the build procedure
|
to use the host's `catgets' in this situation.
|
to use the host's `catgets' in this situation.
|
|
|
`--with-libiconv-prefix=DIR'
|
`--with-libiconv-prefix=DIR'
|
Search for libiconv header files in `DIR/include' and libiconv
|
Search for libiconv header files in `DIR/include' and libiconv
|
library files in `DIR/lib'.
|
library files in `DIR/lib'.
|
|
|
`--enable-obsolete'
|
`--enable-obsolete'
|
Enable configuration for an obsoleted system. If you attempt to
|
Enable configuration for an obsoleted system. If you attempt to
|
configure GCC for a system (build, host, or target) which has been
|
configure GCC for a system (build, host, or target) which has been
|
obsoleted, and you do not specify this flag, configure will halt
|
obsoleted, and you do not specify this flag, configure will halt
|
with an error message.
|
with an error message.
|
|
|
All support for systems which have been obsoleted in one release
|
All support for systems which have been obsoleted in one release
|
of GCC is removed entirely in the next major release, unless
|
of GCC is removed entirely in the next major release, unless
|
someone steps forward to maintain the port.
|
someone steps forward to maintain the port.
|
|
|
`--enable-decimal-float'
|
`--enable-decimal-float'
|
`--disable-decimal-float'
|
`--disable-decimal-float'
|
Enable (or disable) support for the C decimal floating point
|
Enable (or disable) support for the C decimal floating point
|
extension. This is enabled by default only on PowerPC GNU/Linux
|
extension. This is enabled by default only on PowerPC GNU/Linux
|
systems. Other systems may also support it, but require the user
|
systems. Other systems may also support it, but require the user
|
to specifically enable it.
|
to specifically enable it.
|
|
|
`--with-long-double-128'
|
`--with-long-double-128'
|
Specify if `long double' type should be 128-bit by default on
|
Specify if `long double' type should be 128-bit by default on
|
selected GNU/Linux architectures. If using
|
selected GNU/Linux architectures. If using
|
`--without-long-double-128', `long double' will be by default
|
`--without-long-double-128', `long double' will be by default
|
64-bit, the same as `double' type. When neither of these
|
64-bit, the same as `double' type. When neither of these
|
configure options are used, the default will be 128-bit `long
|
configure options are used, the default will be 128-bit `long
|
double' when built against GNU C Library 2.4 and later, 64-bit
|
double' when built against GNU C Library 2.4 and later, 64-bit
|
`long double' otherwise.
|
`long double' otherwise.
|
|
|
|
|
Cross-Compiler-Specific Options
|
Cross-Compiler-Specific Options
|
-------------------------------
|
-------------------------------
|
|
|
The following options only apply to building cross compilers.
|
The following options only apply to building cross compilers.
|
`--with-sysroot'
|
`--with-sysroot'
|
`--with-sysroot=DIR'
|
`--with-sysroot=DIR'
|
Tells GCC to consider DIR as the root of a tree that contains a
|
Tells GCC to consider DIR as the root of a tree that contains a
|
(subset of) the root filesystem of the target operating system.
|
(subset of) the root filesystem of the target operating system.
|
Target system headers, libraries and run-time object files will be
|
Target system headers, libraries and run-time object files will be
|
searched in there. The specified directory is not copied into the
|
searched in there. The specified directory is not copied into the
|
install tree, unlike the options `--with-headers' and
|
install tree, unlike the options `--with-headers' and
|
`--with-libs' that this option obsoletes. The default value, in
|
`--with-libs' that this option obsoletes. The default value, in
|
case `--with-sysroot' is not given an argument, is
|
case `--with-sysroot' is not given an argument, is
|
`${gcc_tooldir}/sys-root'. If the specified directory is a
|
`${gcc_tooldir}/sys-root'. If the specified directory is a
|
subdirectory of `${exec_prefix}', then it will be found relative to
|
subdirectory of `${exec_prefix}', then it will be found relative to
|
the GCC binaries if the installation tree is moved.
|
the GCC binaries if the installation tree is moved.
|
|
|
`--with-build-sysroot'
|
`--with-build-sysroot'
|
`--with-build-sysroot=DIR'
|
`--with-build-sysroot=DIR'
|
Tells GCC to consider DIR as the system root (see
|
Tells GCC to consider DIR as the system root (see
|
`--with-sysroot') while building target libraries, instead of the
|
`--with-sysroot') while building target libraries, instead of the
|
directory specified with `--with-sysroot'. This option is only
|
directory specified with `--with-sysroot'. This option is only
|
useful when you are already using `--with-sysroot'. You can use
|
useful when you are already using `--with-sysroot'. You can use
|
`--with-build-sysroot' when you are configuring with `--prefix'
|
`--with-build-sysroot' when you are configuring with `--prefix'
|
set to a directory that is different from the one in which you are
|
set to a directory that is different from the one in which you are
|
installing GCC and your target libraries.
|
installing GCC and your target libraries.
|
|
|
This option affects the system root for the compiler used to build
|
This option affects the system root for the compiler used to build
|
target libraries (which runs on the build system); it does not
|
target libraries (which runs on the build system); it does not
|
affect the compiler which is used to build GCC itself.
|
affect the compiler which is used to build GCC itself.
|
|
|
`--with-headers'
|
`--with-headers'
|
`--with-headers=DIR'
|
`--with-headers=DIR'
|
Deprecated in favor of `--with-sysroot'. Specifies that target
|
Deprecated in favor of `--with-sysroot'. Specifies that target
|
headers are available when building a cross compiler. The DIR
|
headers are available when building a cross compiler. The DIR
|
argument specifies a directory which has the target include files.
|
argument specifies a directory which has the target include files.
|
These include files will be copied into the `gcc' install
|
These include files will be copied into the `gcc' install
|
directory. _This option with the DIR argument is required_ when
|
directory. _This option with the DIR argument is required_ when
|
building a cross compiler, if `PREFIX/TARGET/sys-include' doesn't
|
building a cross compiler, if `PREFIX/TARGET/sys-include' doesn't
|
pre-exist. If `PREFIX/TARGET/sys-include' does pre-exist, the DIR
|
pre-exist. If `PREFIX/TARGET/sys-include' does pre-exist, the DIR
|
argument may be omitted. `fixincludes' will be run on these files
|
argument may be omitted. `fixincludes' will be run on these files
|
to make them compatible with GCC.
|
to make them compatible with GCC.
|
|
|
`--without-headers'
|
`--without-headers'
|
Tells GCC not use any target headers from a libc when building a
|
Tells GCC not use any target headers from a libc when building a
|
cross compiler. When crossing to GNU/Linux, you need the headers
|
cross compiler. When crossing to GNU/Linux, you need the headers
|
so GCC can build the exception handling for libgcc.
|
so GCC can build the exception handling for libgcc.
|
|
|
`--with-libs'
|
`--with-libs'
|
`--with-libs=``DIR1 DIR2 ... DIRN'''
|
`--with-libs=``DIR1 DIR2 ... DIRN'''
|
Deprecated in favor of `--with-sysroot'. Specifies a list of
|
Deprecated in favor of `--with-sysroot'. Specifies a list of
|
directories which contain the target runtime libraries. These
|
directories which contain the target runtime libraries. These
|
libraries will be copied into the `gcc' install directory. If the
|
libraries will be copied into the `gcc' install directory. If the
|
directory list is omitted, this option has no effect.
|
directory list is omitted, this option has no effect.
|
|
|
`--with-newlib'
|
`--with-newlib'
|
Specifies that `newlib' is being used as the target C library.
|
Specifies that `newlib' is being used as the target C library.
|
This causes `__eprintf' to be omitted from `libgcc.a' on the
|
This causes `__eprintf' to be omitted from `libgcc.a' on the
|
assumption that it will be provided by `newlib'.
|
assumption that it will be provided by `newlib'.
|
|
|
`--with-build-time-tools=DIR'
|
`--with-build-time-tools=DIR'
|
Specifies where to find the set of target tools (assembler,
|
Specifies where to find the set of target tools (assembler,
|
linker, etc.) that will be used while building GCC itself. This
|
linker, etc.) that will be used while building GCC itself. This
|
option can be useful if the directory layouts are different
|
option can be useful if the directory layouts are different
|
between the system you are building GCC on, and the system where
|
between the system you are building GCC on, and the system where
|
you will deploy it.
|
you will deploy it.
|
|
|
For example, on a `ia64-hp-hpux' system, you may have the GNU
|
For example, on a `ia64-hp-hpux' system, you may have the GNU
|
assembler and linker in `/usr/bin', and the native tools in a
|
assembler and linker in `/usr/bin', and the native tools in a
|
different path, and build a toolchain that expects to find the
|
different path, and build a toolchain that expects to find the
|
native tools in `/usr/bin'.
|
native tools in `/usr/bin'.
|
|
|
When you use this option, you should ensure that DIR includes
|
When you use this option, you should ensure that DIR includes
|
`ar', `as', `ld', `nm', `ranlib' and `strip' if necessary, and
|
`ar', `as', `ld', `nm', `ranlib' and `strip' if necessary, and
|
possibly `objdump'. Otherwise, GCC may use an inconsistent set of
|
possibly `objdump'. Otherwise, GCC may use an inconsistent set of
|
tools.
|
tools.
|
|
|
Fortran-Specific Options
|
Fortran-Specific Options
|
------------------------
|
------------------------
|
|
|
The following options apply to the build of the Fortran front end.
|
The following options apply to the build of the Fortran front end.
|
|
|
`--with-gmp=PATHNAME'
|
`--with-gmp=PATHNAME'
|
`--with-gmp-include=PATHNAME'
|
`--with-gmp-include=PATHNAME'
|
`--with-gmp-lib=PATHNAME'
|
`--with-gmp-lib=PATHNAME'
|
`--with-mpfr=PATHNAME'
|
`--with-mpfr=PATHNAME'
|
`--with-mpfr-include=PATHNAME'
|
`--with-mpfr-include=PATHNAME'
|
`--with-mpfr-lib=PATHNAME'
|
`--with-mpfr-lib=PATHNAME'
|
If you do not have GMP (the GNU Multiple Precision library) and the
|
If you do not have GMP (the GNU Multiple Precision library) and the
|
MPFR Libraries installed in a standard location and you want to
|
MPFR Libraries installed in a standard location and you want to
|
build the Fortran front-end, you can explicitly specify the
|
build the Fortran front-end, you can explicitly specify the
|
directory where they are installed (`--with-gmp=GMPINSTALLDIR',
|
directory where they are installed (`--with-gmp=GMPINSTALLDIR',
|
`--with-mpfr=MPFRINSTALLDIR'). The `--with-gmp=GMPINSTALLDIR'
|
`--with-mpfr=MPFRINSTALLDIR'). The `--with-gmp=GMPINSTALLDIR'
|
option is shorthand for `--with-gmp-lib=GMPINSTALLDIR/lib' and
|
option is shorthand for `--with-gmp-lib=GMPINSTALLDIR/lib' and
|
`--with-gmp-include=GMPINSTALLDIR/include'. Likewise the
|
`--with-gmp-include=GMPINSTALLDIR/include'. Likewise the
|
`--with-mpfr=MPFRINSTALLDIR' option is shorthand for
|
`--with-mpfr=MPFRINSTALLDIR' option is shorthand for
|
`--with-mpfr-lib=MPFRINSTALLDIR/lib' and
|
`--with-mpfr-lib=MPFRINSTALLDIR/lib' and
|
`--with-mpfr-include=MPFRINSTALLDIR/include'. If these shorthand
|
`--with-mpfr-include=MPFRINSTALLDIR/include'. If these shorthand
|
assumptions are not correct, you can use the explicit include and
|
assumptions are not correct, you can use the explicit include and
|
lib options directly.
|
lib options directly.
|
|
|
|
|
Java-Specific Options
|
Java-Specific Options
|
---------------------
|
---------------------
|
|
|
The following option applies to the build of the Java front end.
|
The following option applies to the build of the Java front end.
|
|
|
`--disable-libgcj'
|
`--disable-libgcj'
|
Specify that the run-time libraries used by GCJ should not be
|
Specify that the run-time libraries used by GCJ should not be
|
built. This is useful in case you intend to use GCJ with some
|
built. This is useful in case you intend to use GCJ with some
|
other run-time, or you're going to install it separately, or it
|
other run-time, or you're going to install it separately, or it
|
just happens not to build on your particular machine. In general,
|
just happens not to build on your particular machine. In general,
|
if the Java front end is enabled, the GCJ libraries will be
|
if the Java front end is enabled, the GCJ libraries will be
|
enabled too, unless they're known to not work on the target
|
enabled too, unless they're known to not work on the target
|
platform. If GCJ is enabled but `libgcj' isn't built, you may
|
platform. If GCJ is enabled but `libgcj' isn't built, you may
|
need to port it; in this case, before modifying the top-level
|
need to port it; in this case, before modifying the top-level
|
`configure.in' so that `libgcj' is enabled by default on this
|
`configure.in' so that `libgcj' is enabled by default on this
|
platform, you may use `--enable-libgcj' to override the default.
|
platform, you may use `--enable-libgcj' to override the default.
|
|
|
|
|
The following options apply to building `libgcj'.
|
The following options apply to building `libgcj'.
|
|
|
General Options
|
General Options
|
...............
|
...............
|
|
|
`--disable-getenv-properties'
|
`--disable-getenv-properties'
|
Don't set system properties from `GCJ_PROPERTIES'.
|
Don't set system properties from `GCJ_PROPERTIES'.
|
|
|
`--enable-hash-synchronization'
|
`--enable-hash-synchronization'
|
Use a global hash table for monitor locks. Ordinarily, `libgcj''s
|
Use a global hash table for monitor locks. Ordinarily, `libgcj''s
|
`configure' script automatically makes the correct choice for this
|
`configure' script automatically makes the correct choice for this
|
option for your platform. Only use this if you know you need the
|
option for your platform. Only use this if you know you need the
|
library to be configured differently.
|
library to be configured differently.
|
|
|
`--enable-interpreter'
|
`--enable-interpreter'
|
Enable the Java interpreter. The interpreter is automatically
|
Enable the Java interpreter. The interpreter is automatically
|
enabled by default on all platforms that support it. This option
|
enabled by default on all platforms that support it. This option
|
is really only useful if you want to disable the interpreter
|
is really only useful if you want to disable the interpreter
|
(using `--disable-interpreter').
|
(using `--disable-interpreter').
|
|
|
`--disable-java-net'
|
`--disable-java-net'
|
Disable java.net. This disables the native part of java.net only,
|
Disable java.net. This disables the native part of java.net only,
|
using non-functional stubs for native method implementations.
|
using non-functional stubs for native method implementations.
|
|
|
`--disable-jvmpi'
|
`--disable-jvmpi'
|
Disable JVMPI support.
|
Disable JVMPI support.
|
|
|
`--with-ecos'
|
`--with-ecos'
|
Enable runtime eCos target support.
|
Enable runtime eCos target support.
|
|
|
`--without-libffi'
|
`--without-libffi'
|
Don't use `libffi'. This will disable the interpreter and JNI
|
Don't use `libffi'. This will disable the interpreter and JNI
|
support as well, as these require `libffi' to work.
|
support as well, as these require `libffi' to work.
|
|
|
`--enable-libgcj-debug'
|
`--enable-libgcj-debug'
|
Enable runtime debugging code.
|
Enable runtime debugging code.
|
|
|
`--enable-libgcj-multifile'
|
`--enable-libgcj-multifile'
|
If specified, causes all `.java' source files to be compiled into
|
If specified, causes all `.java' source files to be compiled into
|
`.class' files in one invocation of `gcj'. This can speed up
|
`.class' files in one invocation of `gcj'. This can speed up
|
build time, but is more resource-intensive. If this option is
|
build time, but is more resource-intensive. If this option is
|
unspecified or disabled, `gcj' is invoked once for each `.java'
|
unspecified or disabled, `gcj' is invoked once for each `.java'
|
file to compile into a `.class' file.
|
file to compile into a `.class' file.
|
|
|
`--with-libiconv-prefix=DIR'
|
`--with-libiconv-prefix=DIR'
|
Search for libiconv in `DIR/include' and `DIR/lib'.
|
Search for libiconv in `DIR/include' and `DIR/lib'.
|
|
|
`--enable-sjlj-exceptions'
|
`--enable-sjlj-exceptions'
|
Force use of the `setjmp'/`longjmp'-based scheme for exceptions.
|
Force use of the `setjmp'/`longjmp'-based scheme for exceptions.
|
`configure' ordinarily picks the correct value based on the
|
`configure' ordinarily picks the correct value based on the
|
platform. Only use this option if you are sure you need a
|
platform. Only use this option if you are sure you need a
|
different setting.
|
different setting.
|
|
|
`--with-system-zlib'
|
`--with-system-zlib'
|
Use installed `zlib' rather than that included with GCC.
|
Use installed `zlib' rather than that included with GCC.
|
|
|
`--with-win32-nlsapi=ansi, unicows or unicode'
|
`--with-win32-nlsapi=ansi, unicows or unicode'
|
Indicates how MinGW `libgcj' translates between UNICODE characters
|
Indicates how MinGW `libgcj' translates between UNICODE characters
|
and the Win32 API.
|
and the Win32 API.
|
`ansi'
|
`ansi'
|
Use the single-byte `char' and the Win32 A functions natively,
|
Use the single-byte `char' and the Win32 A functions natively,
|
translating to and from UNICODE when using these functions.
|
translating to and from UNICODE when using these functions.
|
If unspecified, this is the default.
|
If unspecified, this is the default.
|
|
|
`unicows'
|
`unicows'
|
Use the `WCHAR' and Win32 W functions natively. Adds
|
Use the `WCHAR' and Win32 W functions natively. Adds
|
`-lunicows' to `libgcj.spec' to link with `libunicows'.
|
`-lunicows' to `libgcj.spec' to link with `libunicows'.
|
`unicows.dll' needs to be deployed on Microsoft Windows 9X
|
`unicows.dll' needs to be deployed on Microsoft Windows 9X
|
machines running built executables. `libunicows.a', an
|
machines running built executables. `libunicows.a', an
|
open-source import library around Microsoft's `unicows.dll',
|
open-source import library around Microsoft's `unicows.dll',
|
is obtained from `http://libunicows.sourceforge.net/', which
|
is obtained from `http://libunicows.sourceforge.net/', which
|
also gives details on getting `unicows.dll' from Microsoft.
|
also gives details on getting `unicows.dll' from Microsoft.
|
|
|
`unicode'
|
`unicode'
|
Use the `WCHAR' and Win32 W functions natively. Does _not_
|
Use the `WCHAR' and Win32 W functions natively. Does _not_
|
add `-lunicows' to `libgcj.spec'. The built executables will
|
add `-lunicows' to `libgcj.spec'. The built executables will
|
only run on Microsoft Windows NT and above.
|
only run on Microsoft Windows NT and above.
|
|
|
AWT-Specific Options
|
AWT-Specific Options
|
....................
|
....................
|
|
|
`--with-x'
|
`--with-x'
|
Use the X Window System.
|
Use the X Window System.
|
|
|
`--enable-java-awt=PEER(S)'
|
`--enable-java-awt=PEER(S)'
|
Specifies the AWT peer library or libraries to build alongside
|
Specifies the AWT peer library or libraries to build alongside
|
`libgcj'. If this option is unspecified or disabled, AWT will be
|
`libgcj'. If this option is unspecified or disabled, AWT will be
|
non-functional. Current valid values are `gtk' and `xlib'.
|
non-functional. Current valid values are `gtk' and `xlib'.
|
Multiple libraries should be separated by a comma (i.e.
|
Multiple libraries should be separated by a comma (i.e.
|
`--enable-java-awt=gtk,xlib').
|
`--enable-java-awt=gtk,xlib').
|
|
|
`--enable-gtk-cairo'
|
`--enable-gtk-cairo'
|
Build the cairo Graphics2D implementation on GTK.
|
Build the cairo Graphics2D implementation on GTK.
|
|
|
`--enable-java-gc=TYPE'
|
`--enable-java-gc=TYPE'
|
Choose garbage collector. Defaults to `boehm' if unspecified.
|
Choose garbage collector. Defaults to `boehm' if unspecified.
|
|
|
`--disable-gtktest'
|
`--disable-gtktest'
|
Do not try to compile and run a test GTK+ program.
|
Do not try to compile and run a test GTK+ program.
|
|
|
`--disable-glibtest'
|
`--disable-glibtest'
|
Do not try to compile and run a test GLIB program.
|
Do not try to compile and run a test GLIB program.
|
|
|
`--with-libart-prefix=PFX'
|
`--with-libart-prefix=PFX'
|
Prefix where libart is installed (optional).
|
Prefix where libart is installed (optional).
|
|
|
`--with-libart-exec-prefix=PFX'
|
`--with-libart-exec-prefix=PFX'
|
Exec prefix where libart is installed (optional).
|
Exec prefix where libart is installed (optional).
|
|
|
`--disable-libarttest'
|
`--disable-libarttest'
|
Do not try to compile and run a test libart program.
|
Do not try to compile and run a test libart program.
|
|
|
|
|
|
|
File: gccinstall.info, Node: Building, Next: Testing, Prev: Configuration, Up: Installing GCC
|
File: gccinstall.info, Node: Building, Next: Testing, Prev: Configuration, Up: Installing GCC
|
|
|
5 Building
|
5 Building
|
**********
|
**********
|
|
|
Now that GCC is configured, you are ready to build the compiler and
|
Now that GCC is configured, you are ready to build the compiler and
|
runtime libraries.
|
runtime libraries.
|
|
|
Some commands executed when making the compiler may fail (return a
|
Some commands executed when making the compiler may fail (return a
|
nonzero status) and be ignored by `make'. These failures, which are
|
nonzero status) and be ignored by `make'. These failures, which are
|
often due to files that were not found, are expected, and can safely be
|
often due to files that were not found, are expected, and can safely be
|
ignored.
|
ignored.
|
|
|
It is normal to have compiler warnings when compiling certain files.
|
It is normal to have compiler warnings when compiling certain files.
|
Unless you are a GCC developer, you can generally ignore these warnings
|
Unless you are a GCC developer, you can generally ignore these warnings
|
unless they cause compilation to fail. Developers should attempt to fix
|
unless they cause compilation to fail. Developers should attempt to fix
|
any warnings encountered, however they can temporarily continue past
|
any warnings encountered, however they can temporarily continue past
|
warnings-as-errors by specifying the configure flag `--disable-werror'.
|
warnings-as-errors by specifying the configure flag `--disable-werror'.
|
|
|
On certain old systems, defining certain environment variables such
|
On certain old systems, defining certain environment variables such
|
as `CC' can interfere with the functioning of `make'.
|
as `CC' can interfere with the functioning of `make'.
|
|
|
If you encounter seemingly strange errors when trying to build the
|
If you encounter seemingly strange errors when trying to build the
|
compiler in a directory other than the source directory, it could be
|
compiler in a directory other than the source directory, it could be
|
because you have previously configured the compiler in the source
|
because you have previously configured the compiler in the source
|
directory. Make sure you have done all the necessary preparations.
|
directory. Make sure you have done all the necessary preparations.
|
|
|
If you build GCC on a BSD system using a directory stored in an old
|
If you build GCC on a BSD system using a directory stored in an old
|
System V file system, problems may occur in running `fixincludes' if the
|
System V file system, problems may occur in running `fixincludes' if the
|
System V file system doesn't support symbolic links. These problems
|
System V file system doesn't support symbolic links. These problems
|
result in a failure to fix the declaration of `size_t' in
|
result in a failure to fix the declaration of `size_t' in
|
`sys/types.h'. If you find that `size_t' is a signed type and that
|
`sys/types.h'. If you find that `size_t' is a signed type and that
|
type mismatches occur, this could be the cause.
|
type mismatches occur, this could be the cause.
|
|
|
The solution is not to use such a directory for building GCC.
|
The solution is not to use such a directory for building GCC.
|
|
|
When building from SVN or snapshots, or if you modify parser sources,
|
When building from SVN or snapshots, or if you modify parser sources,
|
you need the Bison parser generator installed. If you do not modify
|
you need the Bison parser generator installed. If you do not modify
|
parser sources, releases contain the Bison-generated files and you do
|
parser sources, releases contain the Bison-generated files and you do
|
not need Bison installed to build them.
|
not need Bison installed to build them.
|
|
|
When building from SVN or snapshots, or if you modify Texinfo
|
When building from SVN or snapshots, or if you modify Texinfo
|
documentation, you need version 4.4 or later of Texinfo installed if you
|
documentation, you need version 4.4 or later of Texinfo installed if you
|
want Info documentation to be regenerated. Releases contain Info
|
want Info documentation to be regenerated. Releases contain Info
|
documentation pre-built for the unmodified documentation in the release.
|
documentation pre-built for the unmodified documentation in the release.
|
|
|
5.1 Building a native compiler
|
5.1 Building a native compiler
|
==============================
|
==============================
|
|
|
For a native build, the default configuration is to perform a 3-stage
|
For a native build, the default configuration is to perform a 3-stage
|
bootstrap of the compiler when `make' is invoked. This will build the
|
bootstrap of the compiler when `make' is invoked. This will build the
|
entire GCC system and ensure that it compiles itself correctly. It can
|
entire GCC system and ensure that it compiles itself correctly. It can
|
be disabled with the `--disable-bootstrap' parameter to `configure',
|
be disabled with the `--disable-bootstrap' parameter to `configure',
|
but bootstrapping is suggested because the compiler will be tested more
|
but bootstrapping is suggested because the compiler will be tested more
|
completely and could also have better performance.
|
completely and could also have better performance.
|
|
|
The bootstrapping process will complete the following steps:
|
The bootstrapping process will complete the following steps:
|
|
|
* Build tools necessary to build the compiler.
|
* Build tools necessary to build the compiler.
|
|
|
* Perform a 3-stage bootstrap of the compiler. This includes
|
* Perform a 3-stage bootstrap of the compiler. This includes
|
building three times the target tools for use by the compiler such
|
building three times the target tools for use by the compiler such
|
as binutils (bfd, binutils, gas, gprof, ld, and opcodes) if they
|
as binutils (bfd, binutils, gas, gprof, ld, and opcodes) if they
|
have been individually linked or moved into the top level GCC
|
have been individually linked or moved into the top level GCC
|
source tree before configuring.
|
source tree before configuring.
|
|
|
* Perform a comparison test of the stage2 and stage3 compilers.
|
* Perform a comparison test of the stage2 and stage3 compilers.
|
|
|
* Build runtime libraries using the stage3 compiler from the
|
* Build runtime libraries using the stage3 compiler from the
|
previous step.
|
previous step.
|
|
|
|
|
If you are short on disk space you might consider `make
|
If you are short on disk space you might consider `make
|
bootstrap-lean' instead. The sequence of compilation is the same
|
bootstrap-lean' instead. The sequence of compilation is the same
|
described above, but object files from the stage1 and stage2 of the
|
described above, but object files from the stage1 and stage2 of the
|
3-stage bootstrap of the compiler are deleted as soon as they are no
|
3-stage bootstrap of the compiler are deleted as soon as they are no
|
longer needed.
|
longer needed.
|
|
|
If you want to save additional space during the bootstrap and in the
|
If you want to save additional space during the bootstrap and in the
|
final installation as well, you can build the compiler binaries without
|
final installation as well, you can build the compiler binaries without
|
debugging information as in the following example. This will save
|
debugging information as in the following example. This will save
|
roughly 40% of disk space both for the bootstrap and the final
|
roughly 40% of disk space both for the bootstrap and the final
|
installation. (Libraries will still contain debugging information.)
|
installation. (Libraries will still contain debugging information.)
|
|
|
make CFLAGS='-O' LIBCFLAGS='-g -O2' \
|
make CFLAGS='-O' LIBCFLAGS='-g -O2' \
|
LIBCXXFLAGS='-g -O2 -fno-implicit-templates' bootstrap
|
LIBCXXFLAGS='-g -O2 -fno-implicit-templates' bootstrap
|
|
|
If you wish to use non-default GCC flags when compiling the stage2
|
If you wish to use non-default GCC flags when compiling the stage2
|
and stage3 compilers, set `BOOT_CFLAGS' on the command line when doing
|
and stage3 compilers, set `BOOT_CFLAGS' on the command line when doing
|
`make'. Non-default optimization flags are less well tested here than
|
`make'. Non-default optimization flags are less well tested here than
|
the default of `-g -O2', but should still work. In a few cases, you
|
the default of `-g -O2', but should still work. In a few cases, you
|
may find that you need to specify special flags such as `-msoft-float'
|
may find that you need to specify special flags such as `-msoft-float'
|
here to complete the bootstrap; or, if the native compiler miscompiles
|
here to complete the bootstrap; or, if the native compiler miscompiles
|
the stage1 compiler, you may need to work around this, by choosing
|
the stage1 compiler, you may need to work around this, by choosing
|
`BOOT_CFLAGS' to avoid the parts of the stage1 compiler that were
|
`BOOT_CFLAGS' to avoid the parts of the stage1 compiler that were
|
miscompiled, or by using `make bootstrap4' to increase the number of
|
miscompiled, or by using `make bootstrap4' to increase the number of
|
stages of bootstrap.
|
stages of bootstrap.
|
|
|
Note that using non-standard `CFLAGS' can cause bootstrap to fail if
|
Note that using non-standard `CFLAGS' can cause bootstrap to fail if
|
these trigger a warning with the new compiler. For example using `-O2
|
these trigger a warning with the new compiler. For example using `-O2
|
-g -mcpu=i686' on `i686-pc-linux-gnu' will cause bootstrap failure as
|
-g -mcpu=i686' on `i686-pc-linux-gnu' will cause bootstrap failure as
|
`-mcpu=' is deprecated in 3.4.0 and above.
|
`-mcpu=' is deprecated in 3.4.0 and above.
|
|
|
If you used the flag `--enable-languages=...' to restrict the
|
If you used the flag `--enable-languages=...' to restrict the
|
compilers to be built, only those you've actually enabled will be
|
compilers to be built, only those you've actually enabled will be
|
built. This will of course only build those runtime libraries, for
|
built. This will of course only build those runtime libraries, for
|
which the particular compiler has been built. Please note, that
|
which the particular compiler has been built. Please note, that
|
re-defining `LANGUAGES' when calling `make' *does not* work anymore!
|
re-defining `LANGUAGES' when calling `make' *does not* work anymore!
|
|
|
If the comparison of stage2 and stage3 fails, this normally indicates
|
If the comparison of stage2 and stage3 fails, this normally indicates
|
that the stage2 compiler has compiled GCC incorrectly, and is therefore
|
that the stage2 compiler has compiled GCC incorrectly, and is therefore
|
a potentially serious bug which you should investigate and report. (On
|
a potentially serious bug which you should investigate and report. (On
|
a few systems, meaningful comparison of object files is impossible; they
|
a few systems, meaningful comparison of object files is impossible; they
|
always appear "different". If you encounter this problem, you will
|
always appear "different". If you encounter this problem, you will
|
need to disable comparison in the `Makefile'.)
|
need to disable comparison in the `Makefile'.)
|
|
|
If you do not want to bootstrap your compiler, you can configure with
|
If you do not want to bootstrap your compiler, you can configure with
|
`--disable-bootstrap'. In particular cases, you may want to bootstrap
|
`--disable-bootstrap'. In particular cases, you may want to bootstrap
|
your compiler even if the target system is not the same as the one you
|
your compiler even if the target system is not the same as the one you
|
are building on: for example, you could build a
|
are building on: for example, you could build a
|
`powerpc-unknown-linux-gnu' toolchain on a
|
`powerpc-unknown-linux-gnu' toolchain on a
|
`powerpc64-unknown-linux-gnu' host. In this case, pass
|
`powerpc64-unknown-linux-gnu' host. In this case, pass
|
`--enable-bootstrap' to the configure script.
|
`--enable-bootstrap' to the configure script.
|
|
|
5.2 Building a cross compiler
|
5.2 Building a cross compiler
|
=============================
|
=============================
|
|
|
When building a cross compiler, it is not generally possible to do a
|
When building a cross compiler, it is not generally possible to do a
|
3-stage bootstrap of the compiler. This makes for an interesting
|
3-stage bootstrap of the compiler. This makes for an interesting
|
problem as parts of GCC can only be built with GCC.
|
problem as parts of GCC can only be built with GCC.
|
|
|
To build a cross compiler, we first recommend building and
|
To build a cross compiler, we first recommend building and
|
installing a native compiler. You can then use the native GCC compiler
|
installing a native compiler. You can then use the native GCC compiler
|
to build the cross compiler. The installed native compiler needs to be
|
to build the cross compiler. The installed native compiler needs to be
|
GCC version 2.95 or later.
|
GCC version 2.95 or later.
|
|
|
Assuming you have already installed a native copy of GCC and
|
Assuming you have already installed a native copy of GCC and
|
configured your cross compiler, issue the command `make', which
|
configured your cross compiler, issue the command `make', which
|
performs the following steps:
|
performs the following steps:
|
|
|
* Build host tools necessary to build the compiler.
|
* Build host tools necessary to build the compiler.
|
|
|
* Build target tools for use by the compiler such as binutils (bfd,
|
* Build target tools for use by the compiler such as binutils (bfd,
|
binutils, gas, gprof, ld, and opcodes) if they have been
|
binutils, gas, gprof, ld, and opcodes) if they have been
|
individually linked or moved into the top level GCC source tree
|
individually linked or moved into the top level GCC source tree
|
before configuring.
|
before configuring.
|
|
|
* Build the compiler (single stage only).
|
* Build the compiler (single stage only).
|
|
|
* Build runtime libraries using the compiler from the previous step.
|
* Build runtime libraries using the compiler from the previous step.
|
|
|
Note that if an error occurs in any step the make process will exit.
|
Note that if an error occurs in any step the make process will exit.
|
|
|
If you are not building GNU binutils in the same source tree as GCC,
|
If you are not building GNU binutils in the same source tree as GCC,
|
you will need a cross-assembler and cross-linker installed before
|
you will need a cross-assembler and cross-linker installed before
|
configuring GCC. Put them in the directory `PREFIX/TARGET/bin'. Here
|
configuring GCC. Put them in the directory `PREFIX/TARGET/bin'. Here
|
is a table of the tools you should put in this directory:
|
is a table of the tools you should put in this directory:
|
|
|
`as'
|
`as'
|
This should be the cross-assembler.
|
This should be the cross-assembler.
|
|
|
`ld'
|
`ld'
|
This should be the cross-linker.
|
This should be the cross-linker.
|
|
|
`ar'
|
`ar'
|
This should be the cross-archiver: a program which can manipulate
|
This should be the cross-archiver: a program which can manipulate
|
archive files (linker libraries) in the target machine's format.
|
archive files (linker libraries) in the target machine's format.
|
|
|
`ranlib'
|
`ranlib'
|
This should be a program to construct a symbol table in an archive
|
This should be a program to construct a symbol table in an archive
|
file.
|
file.
|
|
|
The installation of GCC will find these programs in that directory,
|
The installation of GCC will find these programs in that directory,
|
and copy or link them to the proper place to for the cross-compiler to
|
and copy or link them to the proper place to for the cross-compiler to
|
find them when run later.
|
find them when run later.
|
|
|
The easiest way to provide these files is to build the Binutils
|
The easiest way to provide these files is to build the Binutils
|
package. Configure it with the same `--host' and `--target' options
|
package. Configure it with the same `--host' and `--target' options
|
that you use for configuring GCC, then build and install them. They
|
that you use for configuring GCC, then build and install them. They
|
install their executables automatically into the proper directory.
|
install their executables automatically into the proper directory.
|
Alas, they do not support all the targets that GCC supports.
|
Alas, they do not support all the targets that GCC supports.
|
|
|
If you are not building a C library in the same source tree as GCC,
|
If you are not building a C library in the same source tree as GCC,
|
you should also provide the target libraries and headers before
|
you should also provide the target libraries and headers before
|
configuring GCC, specifying the directories with `--with-sysroot' or
|
configuring GCC, specifying the directories with `--with-sysroot' or
|
`--with-headers' and `--with-libs'. Many targets also require "start
|
`--with-headers' and `--with-libs'. Many targets also require "start
|
files" such as `crt0.o' and `crtn.o' which are linked into each
|
files" such as `crt0.o' and `crtn.o' which are linked into each
|
executable. There may be several alternatives for `crt0.o', for use
|
executable. There may be several alternatives for `crt0.o', for use
|
with profiling or other compilation options. Check your target's
|
with profiling or other compilation options. Check your target's
|
definition of `STARTFILE_SPEC' to find out what start files it uses.
|
definition of `STARTFILE_SPEC' to find out what start files it uses.
|
|
|
5.3 Building in parallel
|
5.3 Building in parallel
|
========================
|
========================
|
|
|
GNU Make 3.79 and above, which is necessary to build GCC, support
|
GNU Make 3.79 and above, which is necessary to build GCC, support
|
building in parallel. To activate this, you can use `make -j 2'
|
building in parallel. To activate this, you can use `make -j 2'
|
instead of `make'. You can also specify a bigger number, and in most
|
instead of `make'. You can also specify a bigger number, and in most
|
cases using a value greater than the number of processors in your
|
cases using a value greater than the number of processors in your
|
machine will result in fewer and shorter I/O latency hits, thus
|
machine will result in fewer and shorter I/O latency hits, thus
|
improving overall throughput; this is especially true for slow drives
|
improving overall throughput; this is especially true for slow drives
|
and network filesystems.
|
and network filesystems.
|
|
|
5.4 Building the Ada compiler
|
5.4 Building the Ada compiler
|
=============================
|
=============================
|
|
|
In order to build GNAT, the Ada compiler, you need a working GNAT
|
In order to build GNAT, the Ada compiler, you need a working GNAT
|
compiler (GNAT version 3.14 or later, or GCC version 3.1 or later).
|
compiler (GNAT version 3.14 or later, or GCC version 3.1 or later).
|
This includes GNAT tools such as `gnatmake' and `gnatlink', since the
|
This includes GNAT tools such as `gnatmake' and `gnatlink', since the
|
Ada front end is written in Ada and uses some GNAT-specific extensions.
|
Ada front end is written in Ada and uses some GNAT-specific extensions.
|
|
|
In order to build a cross compiler, it is suggested to install the
|
In order to build a cross compiler, it is suggested to install the
|
new compiler as native first, and then use it to build the cross
|
new compiler as native first, and then use it to build the cross
|
compiler.
|
compiler.
|
|
|
`configure' does not test whether the GNAT installation works and
|
`configure' does not test whether the GNAT installation works and
|
has a sufficiently recent version; if too old a GNAT version is
|
has a sufficiently recent version; if too old a GNAT version is
|
installed, the build will fail unless `--enable-languages' is used to
|
installed, the build will fail unless `--enable-languages' is used to
|
disable building the Ada front end.
|
disable building the Ada front end.
|
|
|
5.5 Building with profile feedback
|
5.5 Building with profile feedback
|
==================================
|
==================================
|
|
|
It is possible to use profile feedback to optimize the compiler itself.
|
It is possible to use profile feedback to optimize the compiler itself.
|
This should result in a faster compiler binary. Experiments done on
|
This should result in a faster compiler binary. Experiments done on
|
x86 using gcc 3.3 showed approximately 7 percent speedup on compiling C
|
x86 using gcc 3.3 showed approximately 7 percent speedup on compiling C
|
programs. To bootstrap the compiler with profile feedback, use `make
|
programs. To bootstrap the compiler with profile feedback, use `make
|
profiledbootstrap'.
|
profiledbootstrap'.
|
|
|
When `make profiledbootstrap' is run, it will first build a `stage1'
|
When `make profiledbootstrap' is run, it will first build a `stage1'
|
compiler. This compiler is used to build a `stageprofile' compiler
|
compiler. This compiler is used to build a `stageprofile' compiler
|
instrumented to collect execution counts of instruction and branch
|
instrumented to collect execution counts of instruction and branch
|
probabilities. Then runtime libraries are compiled with profile
|
probabilities. Then runtime libraries are compiled with profile
|
collected. Finally a `stagefeedback' compiler is built using the
|
collected. Finally a `stagefeedback' compiler is built using the
|
information collected.
|
information collected.
|
|
|
Unlike standard bootstrap, several additional restrictions apply.
|
Unlike standard bootstrap, several additional restrictions apply.
|
The compiler used to build `stage1' needs to support a 64-bit integral
|
The compiler used to build `stage1' needs to support a 64-bit integral
|
type. It is recommended to only use GCC for this. Also parallel make
|
type. It is recommended to only use GCC for this. Also parallel make
|
is currently not supported since collisions in profile collecting may
|
is currently not supported since collisions in profile collecting may
|
occur.
|
occur.
|
|
|
|
|
File: gccinstall.info, Node: Testing, Next: Final install, Prev: Building, Up: Installing GCC
|
File: gccinstall.info, Node: Testing, Next: Final install, Prev: Building, Up: Installing GCC
|
|
|
6 Installing GCC: Testing
|
6 Installing GCC: Testing
|
*************************
|
*************************
|
|
|
Before you install GCC, we encourage you to run the testsuites and to
|
Before you install GCC, we encourage you to run the testsuites and to
|
compare your results with results from a similar configuration that have
|
compare your results with results from a similar configuration that have
|
been submitted to the gcc-testresults mailing list. Some of these
|
been submitted to the gcc-testresults mailing list. Some of these
|
archived results are linked from the build status lists at
|
archived results are linked from the build status lists at
|
`http://gcc.gnu.org/buildstat.html', although not everyone who reports
|
`http://gcc.gnu.org/buildstat.html', although not everyone who reports
|
a successful build runs the testsuites and submits the results. This
|
a successful build runs the testsuites and submits the results. This
|
step is optional and may require you to download additional software,
|
step is optional and may require you to download additional software,
|
but it can give you confidence in your new GCC installation or point out
|
but it can give you confidence in your new GCC installation or point out
|
problems before you install and start using your new GCC.
|
problems before you install and start using your new GCC.
|
|
|
First, you must have downloaded the testsuites. These are part of
|
First, you must have downloaded the testsuites. These are part of
|
the full distribution, but if you downloaded the "core" compiler plus
|
the full distribution, but if you downloaded the "core" compiler plus
|
any front ends, you must download the testsuites separately.
|
any front ends, you must download the testsuites separately.
|
|
|
Second, you must have the testing tools installed. This includes
|
Second, you must have the testing tools installed. This includes
|
DejaGnu, Tcl, and Expect; the DejaGnu site has links to these.
|
DejaGnu, Tcl, and Expect; the DejaGnu site has links to these.
|
|
|
If the directories where `runtest' and `expect' were installed are
|
If the directories where `runtest' and `expect' were installed are
|
not in the `PATH', you may need to set the following environment
|
not in the `PATH', you may need to set the following environment
|
variables appropriately, as in the following example (which assumes
|
variables appropriately, as in the following example (which assumes
|
that DejaGnu has been installed under `/usr/local'):
|
that DejaGnu has been installed under `/usr/local'):
|
|
|
TCL_LIBRARY = /usr/local/share/tcl8.0
|
TCL_LIBRARY = /usr/local/share/tcl8.0
|
DEJAGNULIBS = /usr/local/share/dejagnu
|
DEJAGNULIBS = /usr/local/share/dejagnu
|
|
|
(On systems such as Cygwin, these paths are required to be actual
|
(On systems such as Cygwin, these paths are required to be actual
|
paths, not mounts or links; presumably this is due to some lack of
|
paths, not mounts or links; presumably this is due to some lack of
|
portability in the DejaGnu code.)
|
portability in the DejaGnu code.)
|
|
|
Finally, you can run the testsuite (which may take a long time):
|
Finally, you can run the testsuite (which may take a long time):
|
cd OBJDIR; make -k check
|
cd OBJDIR; make -k check
|
|
|
This will test various components of GCC, such as compiler front
|
This will test various components of GCC, such as compiler front
|
ends and runtime libraries. While running the testsuite, DejaGnu might
|
ends and runtime libraries. While running the testsuite, DejaGnu might
|
emit some harmless messages resembling `WARNING: Couldn't find the
|
emit some harmless messages resembling `WARNING: Couldn't find the
|
global config file.' or `WARNING: Couldn't find tool init file' that
|
global config file.' or `WARNING: Couldn't find tool init file' that
|
can be ignored.
|
can be ignored.
|
|
|
6.1 How can you run the testsuite on selected tests?
|
6.1 How can you run the testsuite on selected tests?
|
====================================================
|
====================================================
|
|
|
In order to run sets of tests selectively, there are targets `make
|
In order to run sets of tests selectively, there are targets `make
|
check-gcc' and `make check-g++' in the `gcc' subdirectory of the object
|
check-gcc' and `make check-g++' in the `gcc' subdirectory of the object
|
directory. You can also just run `make check' in a subdirectory of the
|
directory. You can also just run `make check' in a subdirectory of the
|
object directory.
|
object directory.
|
|
|
A more selective way to just run all `gcc' execute tests in the
|
A more selective way to just run all `gcc' execute tests in the
|
testsuite is to use
|
testsuite is to use
|
|
|
make check-gcc RUNTESTFLAGS="execute.exp OTHER-OPTIONS"
|
make check-gcc RUNTESTFLAGS="execute.exp OTHER-OPTIONS"
|
|
|
Likewise, in order to run only the `g++' "old-deja" tests in the
|
Likewise, in order to run only the `g++' "old-deja" tests in the
|
testsuite with filenames matching `9805*', you would use
|
testsuite with filenames matching `9805*', you would use
|
|
|
make check-g++ RUNTESTFLAGS="old-deja.exp=9805* OTHER-OPTIONS"
|
make check-g++ RUNTESTFLAGS="old-deja.exp=9805* OTHER-OPTIONS"
|
|
|
The `*.exp' files are located in the testsuite directories of the GCC
|
The `*.exp' files are located in the testsuite directories of the GCC
|
source, the most important ones being `compile.exp', `execute.exp',
|
source, the most important ones being `compile.exp', `execute.exp',
|
`dg.exp' and `old-deja.exp'. To get a list of the possible `*.exp'
|
`dg.exp' and `old-deja.exp'. To get a list of the possible `*.exp'
|
files, pipe the output of `make check' into a file and look at the
|
files, pipe the output of `make check' into a file and look at the
|
`Running ... .exp' lines.
|
`Running ... .exp' lines.
|
|
|
6.2 Passing options and running multiple testsuites
|
6.2 Passing options and running multiple testsuites
|
===================================================
|
===================================================
|
|
|
You can pass multiple options to the testsuite using the
|
You can pass multiple options to the testsuite using the
|
`--target_board' option of DejaGNU, either passed as part of
|
`--target_board' option of DejaGNU, either passed as part of
|
`RUNTESTFLAGS', or directly to `runtest' if you prefer to work outside
|
`RUNTESTFLAGS', or directly to `runtest' if you prefer to work outside
|
the makefiles. For example,
|
the makefiles. For example,
|
|
|
make check-g++ RUNTESTFLAGS="--target_board=unix/-O3/-fno-strength-reduce"
|
make check-g++ RUNTESTFLAGS="--target_board=unix/-O3/-fno-strength-reduce"
|
|
|
will run the standard `g++' testsuites ("unix" is the target name
|
will run the standard `g++' testsuites ("unix" is the target name
|
for a standard native testsuite situation), passing `-O3
|
for a standard native testsuite situation), passing `-O3
|
-fno-strength-reduce' to the compiler on every test, i.e., slashes
|
-fno-strength-reduce' to the compiler on every test, i.e., slashes
|
separate options.
|
separate options.
|
|
|
You can run the testsuites multiple times using combinations of
|
You can run the testsuites multiple times using combinations of
|
options with a syntax similar to the brace expansion of popular shells:
|
options with a syntax similar to the brace expansion of popular shells:
|
|
|
..."--target_board=arm-sim/{-mhard-float,-msoft-float}{-O1,-O2,-O3,}"
|
..."--target_board=arm-sim/{-mhard-float,-msoft-float}{-O1,-O2,-O3,}"
|
|
|
(Note the empty option caused by the trailing comma in the final
|
(Note the empty option caused by the trailing comma in the final
|
group.) The following will run each testsuite eight times using the
|
group.) The following will run each testsuite eight times using the
|
`arm-sim' target, as if you had specified all possible combinations
|
`arm-sim' target, as if you had specified all possible combinations
|
yourself:
|
yourself:
|
|
|
--target_board=arm-sim/-mhard-float/-O1
|
--target_board=arm-sim/-mhard-float/-O1
|
--target_board=arm-sim/-mhard-float/-O2
|
--target_board=arm-sim/-mhard-float/-O2
|
--target_board=arm-sim/-mhard-float/-O3
|
--target_board=arm-sim/-mhard-float/-O3
|
--target_board=arm-sim/-mhard-float
|
--target_board=arm-sim/-mhard-float
|
--target_board=arm-sim/-msoft-float/-O1
|
--target_board=arm-sim/-msoft-float/-O1
|
--target_board=arm-sim/-msoft-float/-O2
|
--target_board=arm-sim/-msoft-float/-O2
|
--target_board=arm-sim/-msoft-float/-O3
|
--target_board=arm-sim/-msoft-float/-O3
|
--target_board=arm-sim/-msoft-float
|
--target_board=arm-sim/-msoft-float
|
|
|
They can be combined as many times as you wish, in arbitrary ways.
|
They can be combined as many times as you wish, in arbitrary ways.
|
This list:
|
This list:
|
|
|
..."--target_board=unix/-Wextra{-O3,-fno-strength-reduce}{-fomit-frame-pointer,}"
|
..."--target_board=unix/-Wextra{-O3,-fno-strength-reduce}{-fomit-frame-pointer,}"
|
|
|
will generate four combinations, all involving `-Wextra'.
|
will generate four combinations, all involving `-Wextra'.
|
|
|
The disadvantage to this method is that the testsuites are run in
|
The disadvantage to this method is that the testsuites are run in
|
serial, which is a waste on multiprocessor systems. For users with GNU
|
serial, which is a waste on multiprocessor systems. For users with GNU
|
Make and a shell which performs brace expansion, you can run the
|
Make and a shell which performs brace expansion, you can run the
|
testsuites in parallel by having the shell perform the combinations and
|
testsuites in parallel by having the shell perform the combinations and
|
`make' do the parallel runs. Instead of using `--target_board', use a
|
`make' do the parallel runs. Instead of using `--target_board', use a
|
special makefile target:
|
special makefile target:
|
|
|
make -jN check-TESTSUITE//TEST-TARGET/OPTION1/OPTION2/...
|
make -jN check-TESTSUITE//TEST-TARGET/OPTION1/OPTION2/...
|
|
|
For example,
|
For example,
|
|
|
make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
|
make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
|
|
|
will run three concurrent "make-gcc" testsuites, eventually testing
|
will run three concurrent "make-gcc" testsuites, eventually testing
|
all ten combinations as described above. Note that this is currently
|
all ten combinations as described above. Note that this is currently
|
only supported in the `gcc' subdirectory. (To see how this works, try
|
only supported in the `gcc' subdirectory. (To see how this works, try
|
typing `echo' before the example given here.)
|
typing `echo' before the example given here.)
|
|
|
6.3 Additional testing for Java Class Libraries
|
6.3 Additional testing for Java Class Libraries
|
===============================================
|
===============================================
|
|
|
The Java runtime tests can be executed via `make check' in the
|
The Java runtime tests can be executed via `make check' in the
|
`TARGET/libjava/testsuite' directory in the build tree.
|
`TARGET/libjava/testsuite' directory in the build tree.
|
|
|
The Mauve Project provides a suite of tests for the Java Class
|
The Mauve Project provides a suite of tests for the Java Class
|
Libraries. This suite can be run as part of libgcj testing by placing
|
Libraries. This suite can be run as part of libgcj testing by placing
|
the Mauve tree within the libjava testsuite at
|
the Mauve tree within the libjava testsuite at
|
`libjava/testsuite/libjava.mauve/mauve', or by specifying the location
|
`libjava/testsuite/libjava.mauve/mauve', or by specifying the location
|
of that tree when invoking `make', as in `make MAUVEDIR=~/mauve check'.
|
of that tree when invoking `make', as in `make MAUVEDIR=~/mauve check'.
|
|
|
Jacks is a free testsuite that tests Java compiler front ends. This
|
Jacks is a free testsuite that tests Java compiler front ends. This
|
suite can be run as part of libgcj testing by placing the Jacks tree
|
suite can be run as part of libgcj testing by placing the Jacks tree
|
within the libjava testsuite at `libjava/testsuite/libjava.jacks/jacks'.
|
within the libjava testsuite at `libjava/testsuite/libjava.jacks/jacks'.
|
|
|
6.4 How to interpret test results
|
6.4 How to interpret test results
|
=================================
|
=================================
|
|
|
The result of running the testsuite are various `*.sum' and `*.log'
|
The result of running the testsuite are various `*.sum' and `*.log'
|
files in the testsuite subdirectories. The `*.log' files contain a
|
files in the testsuite subdirectories. The `*.log' files contain a
|
detailed log of the compiler invocations and the corresponding results,
|
detailed log of the compiler invocations and the corresponding results,
|
the `*.sum' files summarize the results. These summaries contain
|
the `*.sum' files summarize the results. These summaries contain
|
status codes for all tests:
|
status codes for all tests:
|
|
|
* PASS: the test passed as expected
|
* PASS: the test passed as expected
|
|
|
* XPASS: the test unexpectedly passed
|
* XPASS: the test unexpectedly passed
|
|
|
* FAIL: the test unexpectedly failed
|
* FAIL: the test unexpectedly failed
|
|
|
* XFAIL: the test failed as expected
|
* XFAIL: the test failed as expected
|
|
|
* UNSUPPORTED: the test is not supported on this platform
|
* UNSUPPORTED: the test is not supported on this platform
|
|
|
* ERROR: the testsuite detected an error
|
* ERROR: the testsuite detected an error
|
|
|
* WARNING: the testsuite detected a possible problem
|
* WARNING: the testsuite detected a possible problem
|
|
|
It is normal for some tests to report unexpected failures. At the
|
It is normal for some tests to report unexpected failures. At the
|
current time the testing harness does not allow fine grained control
|
current time the testing harness does not allow fine grained control
|
over whether or not a test is expected to fail. This problem should be
|
over whether or not a test is expected to fail. This problem should be
|
fixed in future releases.
|
fixed in future releases.
|
|
|
6.5 Submitting test results
|
6.5 Submitting test results
|
===========================
|
===========================
|
|
|
If you want to report the results to the GCC project, use the
|
If you want to report the results to the GCC project, use the
|
`contrib/test_summary' shell script. Start it in the OBJDIR with
|
`contrib/test_summary' shell script. Start it in the OBJDIR with
|
|
|
SRCDIR/contrib/test_summary -p your_commentary.txt \
|
SRCDIR/contrib/test_summary -p your_commentary.txt \
|
-m gcc-testresults@gcc.gnu.org |sh
|
-m gcc-testresults@gcc.gnu.org |sh
|
|
|
This script uses the `Mail' program to send the results, so make
|
This script uses the `Mail' program to send the results, so make
|
sure it is in your `PATH'. The file `your_commentary.txt' is prepended
|
sure it is in your `PATH'. The file `your_commentary.txt' is prepended
|
to the testsuite summary and should contain any special remarks you
|
to the testsuite summary and should contain any special remarks you
|
have on your results or your build environment. Please do not edit the
|
have on your results or your build environment. Please do not edit the
|
testsuite result block or the subject line, as these messages may be
|
testsuite result block or the subject line, as these messages may be
|
automatically processed.
|
automatically processed.
|
|
|
|
|
File: gccinstall.info, Node: Final install, Prev: Testing, Up: Installing GCC
|
File: gccinstall.info, Node: Final install, Prev: Testing, Up: Installing GCC
|
|
|
7 Installing GCC: Final installation
|
7 Installing GCC: Final installation
|
************************************
|
************************************
|
|
|
Now that GCC has been built (and optionally tested), you can install
|
Now that GCC has been built (and optionally tested), you can install
|
it with
|
it with
|
cd OBJDIR; make install
|
cd OBJDIR; make install
|
|
|
We strongly recommend to install into a target directory where there
|
We strongly recommend to install into a target directory where there
|
is no previous version of GCC present.
|
is no previous version of GCC present.
|
|
|
That step completes the installation of GCC; user level binaries can
|
That step completes the installation of GCC; user level binaries can
|
be found in `PREFIX/bin' where PREFIX is the value you specified with
|
be found in `PREFIX/bin' where PREFIX is the value you specified with
|
the `--prefix' to configure (or `/usr/local' by default). (If you
|
the `--prefix' to configure (or `/usr/local' by default). (If you
|
specified `--bindir', that directory will be used instead; otherwise,
|
specified `--bindir', that directory will be used instead; otherwise,
|
if you specified `--exec-prefix', `EXEC-PREFIX/bin' will be used.)
|
if you specified `--exec-prefix', `EXEC-PREFIX/bin' will be used.)
|
Headers for the C++ and Java libraries are installed in
|
Headers for the C++ and Java libraries are installed in
|
`PREFIX/include'; libraries in `LIBDIR' (normally `PREFIX/lib');
|
`PREFIX/include'; libraries in `LIBDIR' (normally `PREFIX/lib');
|
internal parts of the compiler in `LIBDIR/gcc' and `LIBEXECDIR/gcc';
|
internal parts of the compiler in `LIBDIR/gcc' and `LIBEXECDIR/gcc';
|
documentation in info format in `INFODIR' (normally `PREFIX/info').
|
documentation in info format in `INFODIR' (normally `PREFIX/info').
|
|
|
When installing cross-compilers, GCC's executables are not only
|
When installing cross-compilers, GCC's executables are not only
|
installed into `BINDIR', that is, `EXEC-PREFIX/bin', but additionally
|
installed into `BINDIR', that is, `EXEC-PREFIX/bin', but additionally
|
into `EXEC-PREFIX/TARGET-ALIAS/bin', if that directory exists.
|
into `EXEC-PREFIX/TARGET-ALIAS/bin', if that directory exists.
|
Typically, such "tooldirs" hold target-specific binutils, including
|
Typically, such "tooldirs" hold target-specific binutils, including
|
assembler and linker.
|
assembler and linker.
|
|
|
Installation into a temporary staging area or into a `chroot' jail
|
Installation into a temporary staging area or into a `chroot' jail
|
can be achieved with the command
|
can be achieved with the command
|
|
|
make DESTDIR=PATH-TO-ROOTDIR install
|
make DESTDIR=PATH-TO-ROOTDIR install
|
|
|
where PATH-TO-ROOTDIR is the absolute path of a directory relative to
|
where PATH-TO-ROOTDIR is the absolute path of a directory relative to
|
which all installation paths will be interpreted. Note that the
|
which all installation paths will be interpreted. Note that the
|
directory specified by `DESTDIR' need not exist yet; it will be created
|
directory specified by `DESTDIR' need not exist yet; it will be created
|
if necessary.
|
if necessary.
|
|
|
There is a subtle point with tooldirs and `DESTDIR': If you relocate
|
There is a subtle point with tooldirs and `DESTDIR': If you relocate
|
a cross-compiler installation with e.g. `DESTDIR=ROOTDIR', then the
|
a cross-compiler installation with e.g. `DESTDIR=ROOTDIR', then the
|
directory `ROOTDIR/EXEC-PREFIX/TARGET-ALIAS/bin' will be filled with
|
directory `ROOTDIR/EXEC-PREFIX/TARGET-ALIAS/bin' will be filled with
|
duplicated GCC executables only if it already exists, it will not be
|
duplicated GCC executables only if it already exists, it will not be
|
created otherwise. This is regarded as a feature, not as a bug,
|
created otherwise. This is regarded as a feature, not as a bug,
|
because it gives slightly more control to the packagers using the
|
because it gives slightly more control to the packagers using the
|
`DESTDIR' feature.
|
`DESTDIR' feature.
|
|
|
If you are bootstrapping a released version of GCC then please
|
If you are bootstrapping a released version of GCC then please
|
quickly review the build status page for your release, available from
|
quickly review the build status page for your release, available from
|
`http://gcc.gnu.org/buildstat.html'. If your system is not listed for
|
`http://gcc.gnu.org/buildstat.html'. If your system is not listed for
|
the version of GCC that you built, send a note to
|
the version of GCC that you built, send a note to
|
indicating that you successfully built and installed GCC. Include the
|
indicating that you successfully built and installed GCC. Include the
|
following information:
|
following information:
|
|
|
* Output from running `SRCDIR/config.guess'. Do not send that file
|
* Output from running `SRCDIR/config.guess'. Do not send that file
|
itself, just the one-line output from running it.
|
itself, just the one-line output from running it.
|
|
|
* The output of `gcc -v' for your newly installed `gcc'. This tells
|
* The output of `gcc -v' for your newly installed `gcc'. This tells
|
us which version of GCC you built and the options you passed to
|
us which version of GCC you built and the options you passed to
|
configure.
|
configure.
|
|
|
* Whether you enabled all languages or a subset of them. If you
|
* Whether you enabled all languages or a subset of them. If you
|
used a full distribution then this information is part of the
|
used a full distribution then this information is part of the
|
configure options in the output of `gcc -v', but if you downloaded
|
configure options in the output of `gcc -v', but if you downloaded
|
the "core" compiler plus additional front ends then it isn't
|
the "core" compiler plus additional front ends then it isn't
|
apparent which ones you built unless you tell us about it.
|
apparent which ones you built unless you tell us about it.
|
|
|
* If the build was for GNU/Linux, also include:
|
* If the build was for GNU/Linux, also include:
|
* The distribution name and version (e.g., Red Hat 7.1 or
|
* The distribution name and version (e.g., Red Hat 7.1 or
|
Debian 2.2.3); this information should be available from
|
Debian 2.2.3); this information should be available from
|
`/etc/issue'.
|
`/etc/issue'.
|
|
|
* The version of the Linux kernel, available from `uname
|
* The version of the Linux kernel, available from `uname
|
--version' or `uname -a'.
|
--version' or `uname -a'.
|
|
|
* The version of glibc you used; for RPM-based systems like Red
|
* The version of glibc you used; for RPM-based systems like Red
|
Hat, Mandrake, and SuSE type `rpm -q glibc' to get the glibc
|
Hat, Mandrake, and SuSE type `rpm -q glibc' to get the glibc
|
version, and on systems like Debian and Progeny use `dpkg -l
|
version, and on systems like Debian and Progeny use `dpkg -l
|
libc6'.
|
libc6'.
|
For other systems, you can include similar information if you
|
For other systems, you can include similar information if you
|
think it is relevant.
|
think it is relevant.
|
|
|
* Any other information that you think would be useful to people
|
* Any other information that you think would be useful to people
|
building GCC on the same configuration. The new entry in the
|
building GCC on the same configuration. The new entry in the
|
build status list will include a link to the archived copy of your
|
build status list will include a link to the archived copy of your
|
message.
|
message.
|
|
|
We'd also like to know if the *Note host/target specific
|
We'd also like to know if the *Note host/target specific
|
installation notes: Specific. didn't include your host/target
|
installation notes: Specific. didn't include your host/target
|
information or if that information is incomplete or out of date. Send
|
information or if that information is incomplete or out of date. Send
|
a note to detailing how the information should be
|
a note to detailing how the information should be
|
changed.
|
changed.
|
|
|
If you find a bug, please report it following the bug reporting
|
If you find a bug, please report it following the bug reporting
|
guidelines.
|
guidelines.
|
|
|
If you want to print the GCC manuals, do `cd OBJDIR; make dvi'. You
|
If you want to print the GCC manuals, do `cd OBJDIR; make dvi'. You
|
will need to have `texi2dvi' (version at least 4.4) and TeX installed.
|
will need to have `texi2dvi' (version at least 4.4) and TeX installed.
|
This creates a number of `.dvi' files in subdirectories of `OBJDIR';
|
This creates a number of `.dvi' files in subdirectories of `OBJDIR';
|
these may be converted for printing with programs such as `dvips'.
|
these may be converted for printing with programs such as `dvips'.
|
Alternately, by using `make pdf' in place of `make dvi', you can create
|
Alternately, by using `make pdf' in place of `make dvi', you can create
|
documentation in the form of `.pdf' files; this requires `texi2pdf',
|
documentation in the form of `.pdf' files; this requires `texi2pdf',
|
which is included with Texinfo version 4.8 and later. You can also buy
|
which is included with Texinfo version 4.8 and later. You can also buy
|
printed manuals from the Free Software Foundation, though such manuals
|
printed manuals from the Free Software Foundation, though such manuals
|
may not be for the most recent version of GCC.
|
may not be for the most recent version of GCC.
|
|
|
If you would like to generate online HTML documentation, do `cd
|
If you would like to generate online HTML documentation, do `cd
|
OBJDIR; make html' and HTML will be generated for the gcc manuals in
|
OBJDIR; make html' and HTML will be generated for the gcc manuals in
|
`OBJDIR/gcc/HTML'.
|
`OBJDIR/gcc/HTML'.
|
|
|
|
|
File: gccinstall.info, Node: Binaries, Next: Specific, Prev: Installing GCC, Up: Top
|
File: gccinstall.info, Node: Binaries, Next: Specific, Prev: Installing GCC, Up: Top
|
|
|
8 Installing GCC: Binaries
|
8 Installing GCC: Binaries
|
**************************
|
**************************
|
|
|
We are often asked about pre-compiled versions of GCC. While we
|
We are often asked about pre-compiled versions of GCC. While we
|
cannot provide these for all platforms, below you'll find links to
|
cannot provide these for all platforms, below you'll find links to
|
binaries for various platforms where creating them by yourself is not
|
binaries for various platforms where creating them by yourself is not
|
easy due to various reasons.
|
easy due to various reasons.
|
|
|
Please note that we did not create these binaries, nor do we support
|
Please note that we did not create these binaries, nor do we support
|
them. If you have any problems installing them, please contact their
|
them. If you have any problems installing them, please contact their
|
makers.
|
makers.
|
|
|
* AIX:
|
* AIX:
|
* Bull's Freeware and Shareware Archive for AIX;
|
* Bull's Freeware and Shareware Archive for AIX;
|
|
|
* UCLA Software Library for AIX.
|
* UCLA Software Library for AIX.
|
|
|
* DOS--DJGPP.
|
* DOS--DJGPP.
|
|
|
* Renesas H8/300[HS]--GNU Development Tools for the Renesas
|
* Renesas H8/300[HS]--GNU Development Tools for the Renesas
|
H8/300[HS] Series.
|
H8/300[HS] Series.
|
|
|
* HP-UX:
|
* HP-UX:
|
* HP-UX Porting Center;
|
* HP-UX Porting Center;
|
|
|
* Binaries for HP-UX 11.00 at Aachen University of Technology.
|
* Binaries for HP-UX 11.00 at Aachen University of Technology.
|
|
|
* Motorola 68HC11/68HC12--GNU Development Tools for the Motorola
|
* Motorola 68HC11/68HC12--GNU Development Tools for the Motorola
|
68HC11/68HC12.
|
68HC11/68HC12.
|
|
|
* SCO OpenServer/Unixware.
|
* SCO OpenServer/Unixware.
|
|
|
* Solaris 2 (SPARC, Intel)--Sunfreeware.
|
* Solaris 2 (SPARC, Intel)--Sunfreeware.
|
|
|
* SGI--SGI Freeware.
|
* SGI--SGI Freeware.
|
|
|
* Microsoft Windows:
|
* Microsoft Windows:
|
* The Cygwin project;
|
* The Cygwin project;
|
|
|
* The MinGW project.
|
* The MinGW project.
|
|
|
* The Written Word offers binaries for AIX 4.3.2. IRIX 6.5, Digital
|
* The Written Word offers binaries for AIX 4.3.2. IRIX 6.5, Digital
|
UNIX 4.0D and 5.1, GNU/Linux (i386), HP-UX 10.20, 11.00, and
|
UNIX 4.0D and 5.1, GNU/Linux (i386), HP-UX 10.20, 11.00, and
|
11.11, and Solaris/SPARC 2.5.1, 2.6, 7, 8, and 9.
|
11.11, and Solaris/SPARC 2.5.1, 2.6, 7, 8, and 9.
|
|
|
* OpenPKG offers binaries for quite a number of platforms.
|
* OpenPKG offers binaries for quite a number of platforms.
|
|
|
* The GFortran Wiki has links to GNU Fortran binaries for several
|
* The GFortran Wiki has links to GNU Fortran binaries for several
|
platforms.
|
platforms.
|
|
|
In addition to those specific offerings, you can get a binary
|
In addition to those specific offerings, you can get a binary
|
distribution CD-ROM from the Free Software Foundation. It contains
|
distribution CD-ROM from the Free Software Foundation. It contains
|
binaries for a number of platforms, and includes not only GCC, but
|
binaries for a number of platforms, and includes not only GCC, but
|
other stuff as well. The current CD does not contain the latest
|
other stuff as well. The current CD does not contain the latest
|
version of GCC, but it should allow bootstrapping the compiler. An
|
version of GCC, but it should allow bootstrapping the compiler. An
|
updated version of that disk is in the works.
|
updated version of that disk is in the works.
|
|
|
|
|
File: gccinstall.info, Node: Specific, Next: Old, Prev: Binaries, Up: Top
|
File: gccinstall.info, Node: Specific, Next: Old, Prev: Binaries, Up: Top
|
|
|
9 Host/target specific installation notes for GCC
|
9 Host/target specific installation notes for GCC
|
*************************************************
|
*************************************************
|
|
|
Please read this document carefully _before_ installing the GNU
|
Please read this document carefully _before_ installing the GNU
|
Compiler Collection on your machine.
|
Compiler Collection on your machine.
|
|
|
Note that this list of install notes is _not_ a list of supported
|
Note that this list of install notes is _not_ a list of supported
|
hosts or targets. Not all supported hosts and targets are listed here,
|
hosts or targets. Not all supported hosts and targets are listed here,
|
only the ones that require host-specific or target-specific information
|
only the ones that require host-specific or target-specific information
|
are.
|
are.
|
|
|
alpha*-*-*
|
alpha*-*-*
|
==========
|
==========
|
|
|
This section contains general configuration information for all
|
This section contains general configuration information for all
|
alpha-based platforms using ELF (in particular, ignore this section for
|
alpha-based platforms using ELF (in particular, ignore this section for
|
DEC OSF/1, Digital UNIX and Tru64 UNIX). In addition to reading this
|
DEC OSF/1, Digital UNIX and Tru64 UNIX). In addition to reading this
|
section, please read all other sections that match your target.
|
section, please read all other sections that match your target.
|
|
|
We require binutils 2.11.2 or newer. Previous binutils releases had
|
We require binutils 2.11.2 or newer. Previous binutils releases had
|
a number of problems with DWARF 2 debugging information, not the least
|
a number of problems with DWARF 2 debugging information, not the least
|
of which is incorrect linking of shared libraries.
|
of which is incorrect linking of shared libraries.
|
|
|
alpha*-dec-osf*
|
alpha*-dec-osf*
|
===============
|
===============
|
|
|
Systems using processors that implement the DEC Alpha architecture and
|
Systems using processors that implement the DEC Alpha architecture and
|
are running the DEC/Compaq Unix (DEC OSF/1, Digital UNIX, or Compaq
|
are running the DEC/Compaq Unix (DEC OSF/1, Digital UNIX, or Compaq
|
Tru64 UNIX) operating system, for example the DEC Alpha AXP systems.
|
Tru64 UNIX) operating system, for example the DEC Alpha AXP systems.
|
|
|
As of GCC 3.2, versions before `alpha*-dec-osf4' are no longer
|
As of GCC 3.2, versions before `alpha*-dec-osf4' are no longer
|
supported. (These are the versions which identify themselves as DEC
|
supported. (These are the versions which identify themselves as DEC
|
OSF/1.)
|
OSF/1.)
|
|
|
In Digital Unix V4.0, virtual memory exhausted bootstrap failures
|
In Digital Unix V4.0, virtual memory exhausted bootstrap failures
|
may be fixed by configuring with `--with-gc=simple', reconfiguring
|
may be fixed by configuring with `--with-gc=simple', reconfiguring
|
Kernel Virtual Memory and Swap parameters per the `/usr/sbin/sys_check'
|
Kernel Virtual Memory and Swap parameters per the `/usr/sbin/sys_check'
|
Tuning Suggestions, or applying the patch in
|
Tuning Suggestions, or applying the patch in
|
`http://gcc.gnu.org/ml/gcc/2002-08/msg00822.html'.
|
`http://gcc.gnu.org/ml/gcc/2002-08/msg00822.html'.
|
|
|
In Tru64 UNIX V5.1, Compaq introduced a new assembler that does not
|
In Tru64 UNIX V5.1, Compaq introduced a new assembler that does not
|
currently (2001-06-13) work with `mips-tfile'. As a workaround, we
|
currently (2001-06-13) work with `mips-tfile'. As a workaround, we
|
need to use the old assembler, invoked via the barely documented
|
need to use the old assembler, invoked via the barely documented
|
`-oldas' option. To bootstrap GCC, you either need to use the Compaq C
|
`-oldas' option. To bootstrap GCC, you either need to use the Compaq C
|
Compiler:
|
Compiler:
|
|
|
% CC=cc SRCDIR/configure [OPTIONS] [TARGET]
|
% CC=cc SRCDIR/configure [OPTIONS] [TARGET]
|
|
|
or you can use a copy of GCC 2.95.3 or higher built on Tru64 UNIX
|
or you can use a copy of GCC 2.95.3 or higher built on Tru64 UNIX
|
V4.0:
|
V4.0:
|
|
|
% CC=gcc -Wa,-oldas SRCDIR/configure [OPTIONS] [TARGET]
|
% CC=gcc -Wa,-oldas SRCDIR/configure [OPTIONS] [TARGET]
|
|
|
As of GNU binutils 2.11.2, neither GNU `as' nor GNU `ld' are
|
As of GNU binutils 2.11.2, neither GNU `as' nor GNU `ld' are
|
supported on Tru64 UNIX, so you must not configure GCC with
|
supported on Tru64 UNIX, so you must not configure GCC with
|
`--with-gnu-as' or `--with-gnu-ld'.
|
`--with-gnu-as' or `--with-gnu-ld'.
|
|
|
GCC writes a `.verstamp' directive to the assembler output file
|
GCC writes a `.verstamp' directive to the assembler output file
|
unless it is built as a cross-compiler. It gets the version to use from
|
unless it is built as a cross-compiler. It gets the version to use from
|
the system header file `/usr/include/stamp.h'. If you install a new
|
the system header file `/usr/include/stamp.h'. If you install a new
|
version of DEC Unix, you should rebuild GCC to pick up the new version
|
version of DEC Unix, you should rebuild GCC to pick up the new version
|
stamp.
|
stamp.
|
|
|
Note that since the Alpha is a 64-bit architecture, cross-compilers
|
Note that since the Alpha is a 64-bit architecture, cross-compilers
|
from 32-bit machines will not generate code as efficient as that
|
from 32-bit machines will not generate code as efficient as that
|
generated when the compiler is running on a 64-bit machine because many
|
generated when the compiler is running on a 64-bit machine because many
|
optimizations that depend on being able to represent a word on the
|
optimizations that depend on being able to represent a word on the
|
target in an integral value on the host cannot be performed. Building
|
target in an integral value on the host cannot be performed. Building
|
cross-compilers on the Alpha for 32-bit machines has only been tested in
|
cross-compilers on the Alpha for 32-bit machines has only been tested in
|
a few cases and may not work properly.
|
a few cases and may not work properly.
|
|
|
`make compare' may fail on old versions of DEC Unix unless you add
|
`make compare' may fail on old versions of DEC Unix unless you add
|
`-save-temps' to `CFLAGS'. On these systems, the name of the assembler
|
`-save-temps' to `CFLAGS'. On these systems, the name of the assembler
|
input file is stored in the object file, and that makes comparison fail
|
input file is stored in the object file, and that makes comparison fail
|
if it differs between the `stage1' and `stage2' compilations. The
|
if it differs between the `stage1' and `stage2' compilations. The
|
option `-save-temps' forces a fixed name to be used for the assembler
|
option `-save-temps' forces a fixed name to be used for the assembler
|
input file, instead of a randomly chosen name in `/tmp'. Do not add
|
input file, instead of a randomly chosen name in `/tmp'. Do not add
|
`-save-temps' unless the comparisons fail without that option. If you
|
`-save-temps' unless the comparisons fail without that option. If you
|
add `-save-temps', you will have to manually delete the `.i' and `.s'
|
add `-save-temps', you will have to manually delete the `.i' and `.s'
|
files after each series of compilations.
|
files after each series of compilations.
|
|
|
GCC now supports both the native (ECOFF) debugging format used by DBX
|
GCC now supports both the native (ECOFF) debugging format used by DBX
|
and GDB and an encapsulated STABS format for use only with GDB. See the
|
and GDB and an encapsulated STABS format for use only with GDB. See the
|
discussion of the `--with-stabs' option of `configure' above for more
|
discussion of the `--with-stabs' option of `configure' above for more
|
information on these formats and how to select them.
|
information on these formats and how to select them.
|
|
|
There is a bug in DEC's assembler that produces incorrect line
|
There is a bug in DEC's assembler that produces incorrect line
|
numbers for ECOFF format when the `.align' directive is used. To work
|
numbers for ECOFF format when the `.align' directive is used. To work
|
around this problem, GCC will not emit such alignment directives while
|
around this problem, GCC will not emit such alignment directives while
|
writing ECOFF format debugging information even if optimization is
|
writing ECOFF format debugging information even if optimization is
|
being performed. Unfortunately, this has the very undesirable
|
being performed. Unfortunately, this has the very undesirable
|
side-effect that code addresses when `-O' is specified are different
|
side-effect that code addresses when `-O' is specified are different
|
depending on whether or not `-g' is also specified.
|
depending on whether or not `-g' is also specified.
|
|
|
To avoid this behavior, specify `-gstabs+' and use GDB instead of
|
To avoid this behavior, specify `-gstabs+' and use GDB instead of
|
DBX. DEC is now aware of this problem with the assembler and hopes to
|
DBX. DEC is now aware of this problem with the assembler and hopes to
|
provide a fix shortly.
|
provide a fix shortly.
|
|
|
alphaev5-cray-unicosmk*
|
alphaev5-cray-unicosmk*
|
=======================
|
=======================
|
|
|
Cray T3E systems running Unicos/Mk.
|
Cray T3E systems running Unicos/Mk.
|
|
|
This port is incomplete and has many known bugs. We hope to improve
|
This port is incomplete and has many known bugs. We hope to improve
|
the support for this target soon. Currently, only the C front end is
|
the support for this target soon. Currently, only the C front end is
|
supported, and it is not possible to build parallel applications. Cray
|
supported, and it is not possible to build parallel applications. Cray
|
modules are not supported; in particular, Craylibs are assumed to be in
|
modules are not supported; in particular, Craylibs are assumed to be in
|
`/opt/ctl/craylibs/craylibs'.
|
`/opt/ctl/craylibs/craylibs'.
|
|
|
On this platform, you need to tell GCC where to find the assembler
|
On this platform, you need to tell GCC where to find the assembler
|
and the linker. The simplest way to do so is by providing `--with-as'
|
and the linker. The simplest way to do so is by providing `--with-as'
|
and `--with-ld' to `configure', e.g.
|
and `--with-ld' to `configure', e.g.
|
|
|
configure --with-as=/opt/ctl/bin/cam --with-ld=/opt/ctl/bin/cld \
|
configure --with-as=/opt/ctl/bin/cam --with-ld=/opt/ctl/bin/cld \
|
--enable-languages=c
|
--enable-languages=c
|
|
|
The comparison test at the end of the bootstrapping process fails on
|
The comparison test at the end of the bootstrapping process fails on
|
Unicos/Mk because the assembler inserts timestamps into object files.
|
Unicos/Mk because the assembler inserts timestamps into object files.
|
You should be able to work around this by doing `make all' after
|
You should be able to work around this by doing `make all' after
|
getting this failure.
|
getting this failure.
|
|
|
arc-*-elf
|
arc-*-elf
|
=========
|
=========
|
|
|
Argonaut ARC processor. This configuration is intended for embedded
|
Argonaut ARC processor. This configuration is intended for embedded
|
systems.
|
systems.
|
|
|
arm-*-elf
|
arm-*-elf
|
=========
|
=========
|
|
|
xscale-*-*
|
xscale-*-*
|
==========
|
==========
|
|
|
ARM-family processors. Subtargets that use the ELF object format
|
ARM-family processors. Subtargets that use the ELF object format
|
require GNU binutils 2.13 or newer. Such subtargets include:
|
require GNU binutils 2.13 or newer. Such subtargets include:
|
`arm-*-freebsd', `arm-*-netbsdelf', `arm-*-*linux', `arm-*-rtems' and
|
`arm-*-freebsd', `arm-*-netbsdelf', `arm-*-*linux', `arm-*-rtems' and
|
`arm-*-kaos'.
|
`arm-*-kaos'.
|
|
|
arm-*-coff
|
arm-*-coff
|
==========
|
==========
|
|
|
ARM-family processors. Note that there are two different varieties of
|
ARM-family processors. Note that there are two different varieties of
|
PE format subtarget supported: `arm-wince-pe' and `arm-pe' as well as a
|
PE format subtarget supported: `arm-wince-pe' and `arm-pe' as well as a
|
standard COFF target `arm-*-coff'.
|
standard COFF target `arm-*-coff'.
|
|
|
arm-*-aout
|
arm-*-aout
|
==========
|
==========
|
|
|
ARM-family processors. These targets support the AOUT file format:
|
ARM-family processors. These targets support the AOUT file format:
|
`arm-*-aout', `arm-*-netbsd'.
|
`arm-*-aout', `arm-*-netbsd'.
|
|
|
avr
|
avr
|
===
|
===
|
|
|
ATMEL AVR-family micro controllers. These are used in embedded
|
ATMEL AVR-family micro controllers. These are used in embedded
|
applications. There are no standard Unix configurations. *Note AVR
|
applications. There are no standard Unix configurations. *Note AVR
|
Options: (gcc)AVR Options, for the list of supported MCU types.
|
Options: (gcc)AVR Options, for the list of supported MCU types.
|
|
|
Use `configure --target=avr --enable-languages="c"' to configure GCC.
|
Use `configure --target=avr --enable-languages="c"' to configure GCC.
|
|
|
Further installation notes and other useful information about AVR
|
Further installation notes and other useful information about AVR
|
tools can also be obtained from:
|
tools can also be obtained from:
|
|
|
* http://www.nongnu.org/avr/
|
* http://www.nongnu.org/avr/
|
|
|
* http://home.overta.ru/users/denisc/
|
* http://home.overta.ru/users/denisc/
|
|
|
* http://www.amelek.gda.pl/avr/
|
* http://www.amelek.gda.pl/avr/
|
|
|
We _strongly_ recommend using binutils 2.13 or newer.
|
We _strongly_ recommend using binutils 2.13 or newer.
|
|
|
The following error:
|
The following error:
|
Error: register required
|
Error: register required
|
|
|
indicates that you should upgrade to a newer version of the binutils.
|
indicates that you should upgrade to a newer version of the binutils.
|
|
|
Blackfin
|
Blackfin
|
========
|
========
|
|
|
The Blackfin processor, an Analog Devices DSP. *Note Blackfin Options:
|
The Blackfin processor, an Analog Devices DSP. *Note Blackfin Options:
|
(gcc)Blackfin Options,
|
(gcc)Blackfin Options,
|
|
|
More information, and a version of binutils with support for this
|
More information, and a version of binutils with support for this
|
processor, is available at `http://blackfin.uclinux.org'
|
processor, is available at `http://blackfin.uclinux.org'
|
|
|
c4x
|
c4x
|
===
|
===
|
|
|
Texas Instruments TMS320C3x and TMS320C4x Floating Point Digital Signal
|
Texas Instruments TMS320C3x and TMS320C4x Floating Point Digital Signal
|
Processors. These are used in embedded applications. There are no
|
Processors. These are used in embedded applications. There are no
|
standard Unix configurations. *Note TMS320C3x/C4x Options:
|
standard Unix configurations. *Note TMS320C3x/C4x Options:
|
(gcc)TMS320C3x/C4x Options, for the list of supported MCU types.
|
(gcc)TMS320C3x/C4x Options, for the list of supported MCU types.
|
|
|
GCC can be configured as a cross compiler for both the C3x and C4x
|
GCC can be configured as a cross compiler for both the C3x and C4x
|
architectures on the same system. Use `configure --target=c4x
|
architectures on the same system. Use `configure --target=c4x
|
--enable-languages="c,c++"' to configure.
|
--enable-languages="c,c++"' to configure.
|
|
|
Further installation notes and other useful information about C4x
|
Further installation notes and other useful information about C4x
|
tools can also be obtained from:
|
tools can also be obtained from:
|
|
|
* http://www.elec.canterbury.ac.nz/c4x/
|
* http://www.elec.canterbury.ac.nz/c4x/
|
|
|
CRIS
|
CRIS
|
====
|
====
|
|
|
CRIS is the CPU architecture in Axis Communications ETRAX
|
CRIS is the CPU architecture in Axis Communications ETRAX
|
system-on-a-chip series. These are used in embedded applications.
|
system-on-a-chip series. These are used in embedded applications.
|
|
|
*Note CRIS Options: (gcc)CRIS Options, for a list of CRIS-specific
|
*Note CRIS Options: (gcc)CRIS Options, for a list of CRIS-specific
|
options.
|
options.
|
|
|
There are a few different CRIS targets:
|
There are a few different CRIS targets:
|
`cris-axis-aout'
|
`cris-axis-aout'
|
Old target. Includes a multilib for the `elinux' a.out-based
|
Old target. Includes a multilib for the `elinux' a.out-based
|
target. No multilibs for newer architecture variants.
|
target. No multilibs for newer architecture variants.
|
|
|
`cris-axis-elf'
|
`cris-axis-elf'
|
Mainly for monolithic embedded systems. Includes a multilib for
|
Mainly for monolithic embedded systems. Includes a multilib for
|
the `v10' core used in `ETRAX 100 LX'.
|
the `v10' core used in `ETRAX 100 LX'.
|
|
|
`cris-axis-linux-gnu'
|
`cris-axis-linux-gnu'
|
A GNU/Linux port for the CRIS architecture, currently targeting
|
A GNU/Linux port for the CRIS architecture, currently targeting
|
`ETRAX 100 LX' by default.
|
`ETRAX 100 LX' by default.
|
|
|
For `cris-axis-aout' and `cris-axis-elf' you need binutils 2.11 or
|
For `cris-axis-aout' and `cris-axis-elf' you need binutils 2.11 or
|
newer. For `cris-axis-linux-gnu' you need binutils 2.12 or newer.
|
newer. For `cris-axis-linux-gnu' you need binutils 2.12 or newer.
|
|
|
Pre-packaged tools can be obtained from
|
Pre-packaged tools can be obtained from
|
`ftp://ftp.axis.com/pub/axis/tools/cris/compiler-kit/'. More
|
`ftp://ftp.axis.com/pub/axis/tools/cris/compiler-kit/'. More
|
information about this platform is available at
|
information about this platform is available at
|
`http://developer.axis.com/'.
|
`http://developer.axis.com/'.
|
|
|
CRX
|
CRX
|
===
|
===
|
|
|
The CRX CompactRISC architecture is a low-power 32-bit architecture with
|
The CRX CompactRISC architecture is a low-power 32-bit architecture with
|
fast context switching and architectural extensibility features.
|
fast context switching and architectural extensibility features.
|
|
|
*Note CRX Options: (gcc)CRX Options,
|
*Note CRX Options: (gcc)CRX Options,
|
|
|
Use `configure --target=crx-elf --enable-languages=c,c++' to
|
Use `configure --target=crx-elf --enable-languages=c,c++' to
|
configure GCC for building a CRX cross-compiler. The option
|
configure GCC for building a CRX cross-compiler. The option
|
`--target=crx-elf' is also used to build the `newlib' C library for CRX.
|
`--target=crx-elf' is also used to build the `newlib' C library for CRX.
|
|
|
It is also possible to build libstdc++-v3 for the CRX architecture.
|
It is also possible to build libstdc++-v3 for the CRX architecture.
|
This needs to be done in a separate step with the following configure
|
This needs to be done in a separate step with the following configure
|
settings: `gcc/libstdc++-v3/configure --host=crx-elf --with-newlib
|
settings: `gcc/libstdc++-v3/configure --host=crx-elf --with-newlib
|
--enable-sjlj-exceptions --enable-cxx-flags='-fexceptions -frtti''
|
--enable-sjlj-exceptions --enable-cxx-flags='-fexceptions -frtti''
|
|
|
DOS
|
DOS
|
===
|
===
|
|
|
Please have a look at the binaries page.
|
Please have a look at the binaries page.
|
|
|
You cannot install GCC by itself on MSDOS; it will not compile under
|
You cannot install GCC by itself on MSDOS; it will not compile under
|
any MSDOS compiler except itself. You need to get the complete
|
any MSDOS compiler except itself. You need to get the complete
|
compilation package DJGPP, which includes binaries as well as sources,
|
compilation package DJGPP, which includes binaries as well as sources,
|
and includes all the necessary compilation tools and libraries.
|
and includes all the necessary compilation tools and libraries.
|
|
|
*-*-freebsd*
|
*-*-freebsd*
|
============
|
============
|
|
|
The version of binutils installed in `/usr/bin' probably works with
|
The version of binutils installed in `/usr/bin' probably works with
|
this release of GCC. However, on FreeBSD 4, bootstrapping against the
|
this release of GCC. However, on FreeBSD 4, bootstrapping against the
|
latest FSF binutils is known to improve overall testsuite results; and,
|
latest FSF binutils is known to improve overall testsuite results; and,
|
on FreeBSD/alpha, using binutils 2.14 or later is required to build
|
on FreeBSD/alpha, using binutils 2.14 or later is required to build
|
libjava.
|
libjava.
|
|
|
Support for FreeBSD 1 was discontinued in GCC 3.2.
|
Support for FreeBSD 1 was discontinued in GCC 3.2.
|
|
|
Support for FreeBSD 2 will be discontinued after GCC 3.4. The
|
Support for FreeBSD 2 will be discontinued after GCC 3.4. The
|
following was true for GCC 3.1 but the current status is unknown. For
|
following was true for GCC 3.1 but the current status is unknown. For
|
FreeBSD 2 or any mutant a.out versions of FreeBSD 3: All configuration
|
FreeBSD 2 or any mutant a.out versions of FreeBSD 3: All configuration
|
support and files as shipped with GCC 2.95 are still in place. FreeBSD
|
support and files as shipped with GCC 2.95 are still in place. FreeBSD
|
2.2.7 has been known to bootstrap completely; however, it is unknown
|
2.2.7 has been known to bootstrap completely; however, it is unknown
|
which version of binutils was used (it is assumed that it was the
|
which version of binutils was used (it is assumed that it was the
|
system copy in `/usr/bin') and C++ EH failures were noted.
|
system copy in `/usr/bin') and C++ EH failures were noted.
|
|
|
For FreeBSD using the ELF file format: DWARF 2 debugging is now the
|
For FreeBSD using the ELF file format: DWARF 2 debugging is now the
|
default for all CPU architectures. It had been the default on
|
default for all CPU architectures. It had been the default on
|
FreeBSD/alpha since its inception. You may use `-gstabs' instead of
|
FreeBSD/alpha since its inception. You may use `-gstabs' instead of
|
`-g', if you really want the old debugging format. There are no known
|
`-g', if you really want the old debugging format. There are no known
|
issues with mixing object files and libraries with different debugging
|
issues with mixing object files and libraries with different debugging
|
formats. Otherwise, this release of GCC should now match more of the
|
formats. Otherwise, this release of GCC should now match more of the
|
configuration used in the stock FreeBSD configuration of GCC. In
|
configuration used in the stock FreeBSD configuration of GCC. In
|
particular, `--enable-threads' is now configured by default. However,
|
particular, `--enable-threads' is now configured by default. However,
|
as a general user, do not attempt to replace the system compiler with
|
as a general user, do not attempt to replace the system compiler with
|
this release. Known to bootstrap and check with good results on
|
this release. Known to bootstrap and check with good results on
|
FreeBSD 4.9-STABLE and 5-CURRENT. In the past, known to bootstrap and
|
FreeBSD 4.9-STABLE and 5-CURRENT. In the past, known to bootstrap and
|
check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2, 4.3, 4.4, 4.5,
|
check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2, 4.3, 4.4, 4.5,
|
4.8-STABLE.
|
4.8-STABLE.
|
|
|
In principle, `--enable-threads' is now compatible with
|
In principle, `--enable-threads' is now compatible with
|
`--enable-libgcj' on FreeBSD. However, it has only been built and
|
`--enable-libgcj' on FreeBSD. However, it has only been built and
|
tested on `i386-*-freebsd[45]' and `alpha-*-freebsd[45]'. The static
|
tested on `i386-*-freebsd[45]' and `alpha-*-freebsd[45]'. The static
|
library may be incorrectly built (symbols are missing at link time).
|
library may be incorrectly built (symbols are missing at link time).
|
There is a rare timing-based startup hang (probably involves an
|
There is a rare timing-based startup hang (probably involves an
|
assumption about the thread library). Multi-threaded boehm-gc
|
assumption about the thread library). Multi-threaded boehm-gc
|
(required for libjava) exposes severe threaded signal-handling bugs on
|
(required for libjava) exposes severe threaded signal-handling bugs on
|
FreeBSD before 4.5-RELEASE. Other CPU architectures supported by
|
FreeBSD before 4.5-RELEASE. Other CPU architectures supported by
|
FreeBSD will require additional configuration tuning in, at the very
|
FreeBSD will require additional configuration tuning in, at the very
|
least, both boehm-gc and libffi.
|
least, both boehm-gc and libffi.
|
|
|
Shared `libgcc_s.so' is now built and installed by default.
|
Shared `libgcc_s.so' is now built and installed by default.
|
|
|
h8300-hms
|
h8300-hms
|
=========
|
=========
|
|
|
Renesas H8/300 series of processors.
|
Renesas H8/300 series of processors.
|
|
|
Please have a look at the binaries page.
|
Please have a look at the binaries page.
|
|
|
The calling convention and structure layout has changed in release
|
The calling convention and structure layout has changed in release
|
2.6. All code must be recompiled. The calling convention now passes
|
2.6. All code must be recompiled. The calling convention now passes
|
the first three arguments in function calls in registers. Structures
|
the first three arguments in function calls in registers. Structures
|
are no longer a multiple of 2 bytes.
|
are no longer a multiple of 2 bytes.
|
|
|
hppa*-hp-hpux*
|
hppa*-hp-hpux*
|
==============
|
==============
|
|
|
Support for HP-UX version 9 and older was discontinued in GCC 3.4.
|
Support for HP-UX version 9 and older was discontinued in GCC 3.4.
|
|
|
We require using gas/binutils on all hppa platforms; you may
|
We require using gas/binutils on all hppa platforms; you may
|
encounter a variety of problems if you try to use the HP assembler.
|
encounter a variety of problems if you try to use the HP assembler.
|
|
|
Specifically, `-g' does not work on HP-UX (since that system uses a
|
Specifically, `-g' does not work on HP-UX (since that system uses a
|
peculiar debugging format which GCC does not know about), unless you
|
peculiar debugging format which GCC does not know about), unless you
|
use GAS and GDB. It may be helpful to configure GCC with the
|
use GAS and GDB. It may be helpful to configure GCC with the
|
`--with-gnu-as' and `--with-as=...' options to ensure that GCC can find
|
`--with-gnu-as' and `--with-as=...' options to ensure that GCC can find
|
GAS.
|
GAS.
|
|
|
If you wish to use the pa-risc 2.0 architecture support with a 32-bit
|
If you wish to use the pa-risc 2.0 architecture support with a 32-bit
|
runtime, you must use gas/binutils 2.11 or newer.
|
runtime, you must use gas/binutils 2.11 or newer.
|
|
|
There are two default scheduling models for instructions. These are
|
There are two default scheduling models for instructions. These are
|
PROCESSOR_7100LC and PROCESSOR_8000. They are selected from the pa-risc
|
PROCESSOR_7100LC and PROCESSOR_8000. They are selected from the pa-risc
|
architecture specified for the target machine when configuring.
|
architecture specified for the target machine when configuring.
|
PROCESSOR_8000 is the default. PROCESSOR_7100LC is selected when the
|
PROCESSOR_8000 is the default. PROCESSOR_7100LC is selected when the
|
target is a `hppa1*' machine.
|
target is a `hppa1*' machine.
|
|
|
The PROCESSOR_8000 model is not well suited to older processors.
|
The PROCESSOR_8000 model is not well suited to older processors.
|
Thus, it is important to completely specify the machine architecture
|
Thus, it is important to completely specify the machine architecture
|
when configuring if you want a model other than PROCESSOR_8000. The
|
when configuring if you want a model other than PROCESSOR_8000. The
|
macro TARGET_SCHED_DEFAULT can be defined in BOOT_CFLAGS if a different
|
macro TARGET_SCHED_DEFAULT can be defined in BOOT_CFLAGS if a different
|
default scheduling model is desired.
|
default scheduling model is desired.
|
|
|
As of GCC 4.0, GCC uses the UNIX 95 namespace for HP-UX 10.10
|
As of GCC 4.0, GCC uses the UNIX 95 namespace for HP-UX 10.10
|
through 11.00, and the UNIX 98 namespace for HP-UX 11.11 and later.
|
through 11.00, and the UNIX 98 namespace for HP-UX 11.11 and later.
|
This namespace change might cause problems when bootstrapping with an
|
This namespace change might cause problems when bootstrapping with an
|
earlier version of GCC or the HP compiler as essentially the same
|
earlier version of GCC or the HP compiler as essentially the same
|
namespace is required for an entire build. This problem can be avoided
|
namespace is required for an entire build. This problem can be avoided
|
in a number of ways. With HP cc, `UNIX_STD' can be set to `95' or
|
in a number of ways. With HP cc, `UNIX_STD' can be set to `95' or
|
`98'. Another way is to add an appropriate set of predefines to `CC'.
|
`98'. Another way is to add an appropriate set of predefines to `CC'.
|
The description for the `munix=' option contains a list of the
|
The description for the `munix=' option contains a list of the
|
predefines used with each standard.
|
predefines used with each standard.
|
|
|
As of GCC 4.1, `DWARF2' exception handling is available on HP-UX.
|
As of GCC 4.1, `DWARF2' exception handling is available on HP-UX.
|
It is now the default. This exposed a bug in the handling of data
|
It is now the default. This exposed a bug in the handling of data
|
relocations in the GAS assembler. The handling of 64-bit data
|
relocations in the GAS assembler. The handling of 64-bit data
|
relocations was seriously broken, affecting debugging and exception
|
relocations was seriously broken, affecting debugging and exception
|
support on all `hppa64-*-*' targets. Under some circumstances, 32-bit
|
support on all `hppa64-*-*' targets. Under some circumstances, 32-bit
|
data relocations could also be handled incorrectly. This problem is
|
data relocations could also be handled incorrectly. This problem is
|
fixed in GAS version 2.16.91 20051125.
|
fixed in GAS version 2.16.91 20051125.
|
|
|
GCC versions prior to 4.1 incorrectly passed and returned complex
|
GCC versions prior to 4.1 incorrectly passed and returned complex
|
values. They are now passed in the same manner as aggregates.
|
values. They are now passed in the same manner as aggregates.
|
|
|
More specific information to `hppa*-hp-hpux*' targets follows.
|
More specific information to `hppa*-hp-hpux*' targets follows.
|
|
|
hppa*-hp-hpux10
|
hppa*-hp-hpux10
|
===============
|
===============
|
|
|
For hpux10.20, we _highly_ recommend you pick up the latest sed patch
|
For hpux10.20, we _highly_ recommend you pick up the latest sed patch
|
`PHCO_19798' from HP. HP has two sites which provide patches free of
|
`PHCO_19798' from HP. HP has two sites which provide patches free of
|
charge:
|
charge:
|
|
|
* `http://us.itrc.hp.com/service/home/home.do' US, Canada,
|
* `http://us.itrc.hp.com/service/home/home.do' US, Canada,
|
Asia-Pacific, and Latin-America.
|
Asia-Pacific, and Latin-America.
|
|
|
* `http://europe.itrc.hp.com/service/home/home.do' Europe.
|
* `http://europe.itrc.hp.com/service/home/home.do' Europe.
|
|
|
The HP assembler on these systems has some problems. Most notably
|
The HP assembler on these systems has some problems. Most notably
|
the assembler inserts timestamps into each object file it creates,
|
the assembler inserts timestamps into each object file it creates,
|
causing the 3-stage comparison test to fail during a bootstrap. You
|
causing the 3-stage comparison test to fail during a bootstrap. You
|
should be able to continue by saying `make all-host all-target' after
|
should be able to continue by saying `make all-host all-target' after
|
getting the failure from `make'.
|
getting the failure from `make'.
|
|
|
GCC 4.0 requires CVS binutils as of April 28, 2004 or later. Earlier
|
GCC 4.0 requires CVS binutils as of April 28, 2004 or later. Earlier
|
versions require binutils 2.8 or later.
|
versions require binutils 2.8 or later.
|
|
|
The C++ ABI has changed incompatibly in GCC 4.0. COMDAT subspaces
|
The C++ ABI has changed incompatibly in GCC 4.0. COMDAT subspaces
|
are used for one-only code and data. This resolves many of the previous
|
are used for one-only code and data. This resolves many of the previous
|
problems in using C++ on this target. However, the ABI is not
|
problems in using C++ on this target. However, the ABI is not
|
compatible with the one implemented under HP-UX 11 using secondary
|
compatible with the one implemented under HP-UX 11 using secondary
|
definitions.
|
definitions.
|
|
|
hppa*-hp-hpux11
|
hppa*-hp-hpux11
|
===============
|
===============
|
|
|
GCC 3.0 and up support HP-UX 11. GCC 2.95.x is not supported and cannot
|
GCC 3.0 and up support HP-UX 11. GCC 2.95.x is not supported and cannot
|
be used to compile GCC 3.0 and up.
|
be used to compile GCC 3.0 and up.
|
|
|
Refer to binaries for information about obtaining precompiled GCC
|
Refer to binaries for information about obtaining precompiled GCC
|
binaries for HP-UX. Precompiled binaries must be obtained to build the
|
binaries for HP-UX. Precompiled binaries must be obtained to build the
|
Ada language as it can't be bootstrapped using C. Ada is only
|
Ada language as it can't be bootstrapped using C. Ada is only
|
available for the 32-bit PA-RISC runtime. The libffi and libjava
|
available for the 32-bit PA-RISC runtime. The libffi and libjava
|
haven't been ported to HP-UX and don't build.
|
haven't been ported to HP-UX and don't build.
|
|
|
Starting with GCC 3.4 an ISO C compiler is required to bootstrap.
|
Starting with GCC 3.4 an ISO C compiler is required to bootstrap.
|
The bundled compiler supports only traditional C; you will need either
|
The bundled compiler supports only traditional C; you will need either
|
HP's unbundled compiler, or a binary distribution of GCC.
|
HP's unbundled compiler, or a binary distribution of GCC.
|
|
|
It is possible to build GCC 3.3 starting with the bundled HP
|
It is possible to build GCC 3.3 starting with the bundled HP
|
compiler, but the process requires several steps. GCC 3.3 can then be
|
compiler, but the process requires several steps. GCC 3.3 can then be
|
used to build later versions. The fastjar program contains ISO C code
|
used to build later versions. The fastjar program contains ISO C code
|
and can't be built with the HP bundled compiler. This problem can be
|
and can't be built with the HP bundled compiler. This problem can be
|
avoided by not building the Java language. For example, use the
|
avoided by not building the Java language. For example, use the
|
`--enable-languages="c,c++,f77,objc"' option in your configure command.
|
`--enable-languages="c,c++,f77,objc"' option in your configure command.
|
|
|
There are several possible approaches to building the distribution.
|
There are several possible approaches to building the distribution.
|
Binutils can be built first using the HP tools. Then, the GCC
|
Binutils can be built first using the HP tools. Then, the GCC
|
distribution can be built. The second approach is to build GCC first
|
distribution can be built. The second approach is to build GCC first
|
using the HP tools, then build binutils, then rebuild GCC. There have
|
using the HP tools, then build binutils, then rebuild GCC. There have
|
been problems with various binary distributions, so it is best not to
|
been problems with various binary distributions, so it is best not to
|
start from a binary distribution.
|
start from a binary distribution.
|
|
|
On 64-bit capable systems, there are two distinct targets. Different
|
On 64-bit capable systems, there are two distinct targets. Different
|
installation prefixes must be used if both are to be installed on the
|
installation prefixes must be used if both are to be installed on the
|
same system. The `hppa[1-2]*-hp-hpux11*' target generates code for the
|
same system. The `hppa[1-2]*-hp-hpux11*' target generates code for the
|
32-bit PA-RISC runtime architecture and uses the HP linker. The
|
32-bit PA-RISC runtime architecture and uses the HP linker. The
|
`hppa64-hp-hpux11*' target generates 64-bit code for the PA-RISC 2.0
|
`hppa64-hp-hpux11*' target generates 64-bit code for the PA-RISC 2.0
|
architecture. The HP and GNU linkers are both supported for this
|
architecture. The HP and GNU linkers are both supported for this
|
target.
|
target.
|
|
|
The script config.guess now selects the target type based on the
|
The script config.guess now selects the target type based on the
|
compiler detected during configuration. You must define `PATH' or `CC'
|
compiler detected during configuration. You must define `PATH' or `CC'
|
so that configure finds an appropriate compiler for the initial
|
so that configure finds an appropriate compiler for the initial
|
bootstrap. When `CC' is used, the definition should contain the
|
bootstrap. When `CC' is used, the definition should contain the
|
options that are needed whenever `CC' is used.
|
options that are needed whenever `CC' is used.
|
|
|
Specifically, options that determine the runtime architecture must be
|
Specifically, options that determine the runtime architecture must be
|
in `CC' to correctly select the target for the build. It is also
|
in `CC' to correctly select the target for the build. It is also
|
convenient to place many other compiler options in `CC'. For example,
|
convenient to place many other compiler options in `CC'. For example,
|
`CC="cc -Ac +DA2.0W -Wp,-H16376 -D_CLASSIC_TYPES -D_HPUX_SOURCE"' can
|
`CC="cc -Ac +DA2.0W -Wp,-H16376 -D_CLASSIC_TYPES -D_HPUX_SOURCE"' can
|
be used to bootstrap the GCC 3.3 branch with the HP compiler in 64-bit
|
be used to bootstrap the GCC 3.3 branch with the HP compiler in 64-bit
|
K&R/bundled mode. The `+DA2.0W' option will result in the automatic
|
K&R/bundled mode. The `+DA2.0W' option will result in the automatic
|
selection of the `hppa64-hp-hpux11*' target. The macro definition
|
selection of the `hppa64-hp-hpux11*' target. The macro definition
|
table of cpp needs to be increased for a successful build with the HP
|
table of cpp needs to be increased for a successful build with the HP
|
compiler. _CLASSIC_TYPES and _HPUX_SOURCE need to be defined when
|
compiler. _CLASSIC_TYPES and _HPUX_SOURCE need to be defined when
|
building with the bundled compiler, or when using the `-Ac' option.
|
building with the bundled compiler, or when using the `-Ac' option.
|
These defines aren't necessary with `-Ae'.
|
These defines aren't necessary with `-Ae'.
|
|
|
It is best to explicitly configure the `hppa64-hp-hpux11*' target
|
It is best to explicitly configure the `hppa64-hp-hpux11*' target
|
with the `--with-ld=...' option. This overrides the standard search
|
with the `--with-ld=...' option. This overrides the standard search
|
for ld. The two linkers supported on this target require different
|
for ld. The two linkers supported on this target require different
|
commands. The default linker is determined during configuration. As a
|
commands. The default linker is determined during configuration. As a
|
result, it's not possible to switch linkers in the middle of a GCC
|
result, it's not possible to switch linkers in the middle of a GCC
|
build. This has been been reported to sometimes occur in unified
|
build. This has been been reported to sometimes occur in unified
|
builds of binutils and GCC.
|
builds of binutils and GCC.
|
|
|
GCC 3.0 through 3.2 require binutils 2.11 or above. GCC 3.3 through
|
GCC 3.0 through 3.2 require binutils 2.11 or above. GCC 3.3 through
|
GCC 4.0 require binutils 2.14 or later.
|
GCC 4.0 require binutils 2.14 or later.
|
|
|
Although the HP assembler can be used for an initial build, it
|
Although the HP assembler can be used for an initial build, it
|
shouldn't be used with any languages other than C and perhaps Fortran
|
shouldn't be used with any languages other than C and perhaps Fortran
|
due to its many limitations. For example, it does not support weak
|
due to its many limitations. For example, it does not support weak
|
symbols or alias definitions. As a result, explicit template
|
symbols or alias definitions. As a result, explicit template
|
instantiations are required when using C++. This makes it difficult if
|
instantiations are required when using C++. This makes it difficult if
|
not impossible to build many C++ applications. You can't generate
|
not impossible to build many C++ applications. You can't generate
|
debugging information when using the HP assembler. Finally,
|
debugging information when using the HP assembler. Finally,
|
bootstrapping fails in the final comparison of object modules due to
|
bootstrapping fails in the final comparison of object modules due to
|
the time stamps that it inserts into the modules. The bootstrap can be
|
the time stamps that it inserts into the modules. The bootstrap can be
|
continued from this point with `make all-host all-target'.
|
continued from this point with `make all-host all-target'.
|
|
|
A recent linker patch must be installed for the correct operation of
|
A recent linker patch must be installed for the correct operation of
|
GCC 3.3 and later. `PHSS_26559' and `PHSS_24304' are the oldest linker
|
GCC 3.3 and later. `PHSS_26559' and `PHSS_24304' are the oldest linker
|
patches that are known to work. They are for HP-UX 11.00 and 11.11,
|
patches that are known to work. They are for HP-UX 11.00 and 11.11,
|
respectively. `PHSS_24303', the companion to `PHSS_24304', might be
|
respectively. `PHSS_24303', the companion to `PHSS_24304', might be
|
usable but it hasn't been tested. These patches have been superseded.
|
usable but it hasn't been tested. These patches have been superseded.
|
Consult the HP patch database to obtain the currently recommended
|
Consult the HP patch database to obtain the currently recommended
|
linker patch for your system.
|
linker patch for your system.
|
|
|
The patches are necessary for the support of weak symbols on the
|
The patches are necessary for the support of weak symbols on the
|
32-bit port, and for the running of initializers and finalizers. Weak
|
32-bit port, and for the running of initializers and finalizers. Weak
|
symbols are implemented using SOM secondary definition symbols. Prior
|
symbols are implemented using SOM secondary definition symbols. Prior
|
to HP-UX 11, there are bugs in the linker support for secondary symbols.
|
to HP-UX 11, there are bugs in the linker support for secondary symbols.
|
The patches correct a problem of linker core dumps creating shared
|
The patches correct a problem of linker core dumps creating shared
|
libraries containing secondary symbols, as well as various other
|
libraries containing secondary symbols, as well as various other
|
linking issues involving secondary symbols.
|
linking issues involving secondary symbols.
|
|
|
GCC 3.3 uses the ELF DT_INIT_ARRAY and DT_FINI_ARRAY capabilities to
|
GCC 3.3 uses the ELF DT_INIT_ARRAY and DT_FINI_ARRAY capabilities to
|
run initializers and finalizers on the 64-bit port. The 32-bit port
|
run initializers and finalizers on the 64-bit port. The 32-bit port
|
uses the linker `+init' and `+fini' options for the same purpose. The
|
uses the linker `+init' and `+fini' options for the same purpose. The
|
patches correct various problems with the +init/+fini options,
|
patches correct various problems with the +init/+fini options,
|
including program core dumps. Binutils 2.14 corrects a problem on the
|
including program core dumps. Binutils 2.14 corrects a problem on the
|
64-bit port resulting from HP's non-standard use of the .init and .fini
|
64-bit port resulting from HP's non-standard use of the .init and .fini
|
sections for array initializers and finalizers.
|
sections for array initializers and finalizers.
|
|
|
There are a number of issues to consider in selecting which linker to
|
There are a number of issues to consider in selecting which linker to
|
use with the 64-bit port. The GNU 64-bit linker can only create dynamic
|
use with the 64-bit port. The GNU 64-bit linker can only create dynamic
|
binaries. The `-static' option causes linking with archive libraries
|
binaries. The `-static' option causes linking with archive libraries
|
but doesn't produce a truly static binary. Dynamic binaries still
|
but doesn't produce a truly static binary. Dynamic binaries still
|
require final binding by the dynamic loader to resolve a set of
|
require final binding by the dynamic loader to resolve a set of
|
dynamic-loader-defined symbols. The default behavior of the HP linker
|
dynamic-loader-defined symbols. The default behavior of the HP linker
|
is the same as the GNU linker. However, it can generate true 64-bit
|
is the same as the GNU linker. However, it can generate true 64-bit
|
static binaries using the `+compat' option.
|
static binaries using the `+compat' option.
|
|
|
The HP 64-bit linker doesn't support linkonce semantics. As a
|
The HP 64-bit linker doesn't support linkonce semantics. As a
|
result, C++ programs have many more sections than they should.
|
result, C++ programs have many more sections than they should.
|
|
|
The GNU 64-bit linker has some issues with shared library support
|
The GNU 64-bit linker has some issues with shared library support
|
and exceptions. As a result, we only support libgcc in archive format.
|
and exceptions. As a result, we only support libgcc in archive format.
|
For similar reasons, dwarf2 unwind and exception support are disabled.
|
For similar reasons, dwarf2 unwind and exception support are disabled.
|
The GNU linker also has problems creating binaries with `-static'. It
|
The GNU linker also has problems creating binaries with `-static'. It
|
doesn't provide stubs for internal calls to global functions in shared
|
doesn't provide stubs for internal calls to global functions in shared
|
libraries, so these calls can't be overloaded.
|
libraries, so these calls can't be overloaded.
|
|
|
Thread support is not implemented in GCC 3.0 through 3.2, so the
|
Thread support is not implemented in GCC 3.0 through 3.2, so the
|
`--enable-threads' configure option does not work. In 3.3 and later,
|
`--enable-threads' configure option does not work. In 3.3 and later,
|
POSIX threads are supported. The optional DCE thread library is not
|
POSIX threads are supported. The optional DCE thread library is not
|
supported.
|
supported.
|
|
|
This port still is undergoing significant development.
|
This port still is undergoing significant development.
|
|
|
*-*-linux-gnu
|
*-*-linux-gnu
|
=============
|
=============
|
|
|
Versions of libstdc++-v3 starting with 3.2.1 require bugfixes present
|
Versions of libstdc++-v3 starting with 3.2.1 require bugfixes present
|
in glibc 2.2.5 and later. More information is available in the
|
in glibc 2.2.5 and later. More information is available in the
|
libstdc++-v3 documentation.
|
libstdc++-v3 documentation.
|
|
|
i?86-*-linux*aout
|
i?86-*-linux*aout
|
=================
|
=================
|
|
|
Use this configuration to generate `a.out' binaries on Linux-based GNU
|
Use this configuration to generate `a.out' binaries on Linux-based GNU
|
systems. This configuration is being superseded.
|
systems. This configuration is being superseded.
|
|
|
i?86-*-linux*
|
i?86-*-linux*
|
=============
|
=============
|
|
|
As of GCC 3.3, binutils 2.13.1 or later is required for this platform.
|
As of GCC 3.3, binutils 2.13.1 or later is required for this platform.
|
See bug 10877 for more information.
|
See bug 10877 for more information.
|
|
|
If you receive Signal 11 errors when building on GNU/Linux, then it
|
If you receive Signal 11 errors when building on GNU/Linux, then it
|
is possible you have a hardware problem. Further information on this
|
is possible you have a hardware problem. Further information on this
|
can be found on www.bitwizard.nl.
|
can be found on www.bitwizard.nl.
|
|
|
i?86-*-sco3.2v5*
|
i?86-*-sco3.2v5*
|
================
|
================
|
|
|
Use this for the SCO OpenServer Release 5 family of operating systems.
|
Use this for the SCO OpenServer Release 5 family of operating systems.
|
|
|
Unlike earlier versions of GCC, the ability to generate COFF with
|
Unlike earlier versions of GCC, the ability to generate COFF with
|
this target is no longer provided.
|
this target is no longer provided.
|
|
|
Earlier versions of GCC emitted DWARF 1 when generating ELF to allow
|
Earlier versions of GCC emitted DWARF 1 when generating ELF to allow
|
the system debugger to be used. That support was too burdensome to
|
the system debugger to be used. That support was too burdensome to
|
maintain. GCC now emits only DWARF 2 for this target. This means you
|
maintain. GCC now emits only DWARF 2 for this target. This means you
|
may use either the UDK debugger or GDB to debug programs built by this
|
may use either the UDK debugger or GDB to debug programs built by this
|
version of GCC.
|
version of GCC.
|
|
|
GCC is now only supported on releases 5.0.4 and later, and requires
|
GCC is now only supported on releases 5.0.4 and later, and requires
|
that you install Support Level Supplement OSS646B or later, and Support
|
that you install Support Level Supplement OSS646B or later, and Support
|
Level Supplement OSS631C or later. If you are using release 5.0.7 of
|
Level Supplement OSS631C or later. If you are using release 5.0.7 of
|
OpenServer, you must have at least the first maintenance pack installed
|
OpenServer, you must have at least the first maintenance pack installed
|
(this includes the relevant portions of OSS646). OSS646, also known as
|
(this includes the relevant portions of OSS646). OSS646, also known as
|
the "Execution Environment Update", provides updated link editors and
|
the "Execution Environment Update", provides updated link editors and
|
assemblers, as well as updated standard C and math libraries. The C
|
assemblers, as well as updated standard C and math libraries. The C
|
startup modules are also updated to support the System V gABI draft, and
|
startup modules are also updated to support the System V gABI draft, and
|
GCC relies on that behavior. OSS631 provides a collection of commonly
|
GCC relies on that behavior. OSS631 provides a collection of commonly
|
used open source libraries, some of which GCC depends on (such as GNU
|
used open source libraries, some of which GCC depends on (such as GNU
|
gettext and zlib). SCO OpenServer Release 5.0.7 has all of this built
|
gettext and zlib). SCO OpenServer Release 5.0.7 has all of this built
|
in by default, but OSS631C and later also apply to that release. Please
|
in by default, but OSS631C and later also apply to that release. Please
|
visit ftp://ftp.sco.com/pub/openserver5 for the latest versions of
|
visit ftp://ftp.sco.com/pub/openserver5 for the latest versions of
|
these (and other potentially useful) supplements.
|
these (and other potentially useful) supplements.
|
|
|
Although there is support for using the native assembler, it is
|
Although there is support for using the native assembler, it is
|
recommended that you configure GCC to use the GNU assembler. You do
|
recommended that you configure GCC to use the GNU assembler. You do
|
this by using the flags `--with-gnu-as'. You should use a modern
|
this by using the flags `--with-gnu-as'. You should use a modern
|
version of GNU binutils. Version 2.13.2.1 was used for all testing.
|
version of GNU binutils. Version 2.13.2.1 was used for all testing.
|
In general, only the `--with-gnu-as' option is tested. A modern
|
In general, only the `--with-gnu-as' option is tested. A modern
|
bintuils (as well as a plethora of other development related GNU
|
bintuils (as well as a plethora of other development related GNU
|
utilities) can be found in Support Level Supplement OSS658A, the "GNU
|
utilities) can be found in Support Level Supplement OSS658A, the "GNU
|
Development Tools" package. See the SCO web and ftp sites for details.
|
Development Tools" package. See the SCO web and ftp sites for details.
|
That package also contains the currently "officially supported" version
|
That package also contains the currently "officially supported" version
|
of GCC, version 2.95.3. It is useful for bootstrapping this version.
|
of GCC, version 2.95.3. It is useful for bootstrapping this version.
|
|
|
i?86-*-solaris2.10
|
i?86-*-solaris2.10
|
==================
|
==================
|
|
|
Use this for Solaris 10 or later on x86 and x86-64 systems. This
|
Use this for Solaris 10 or later on x86 and x86-64 systems. This
|
configuration is supported by GCC 4.0 and later versions only.
|
configuration is supported by GCC 4.0 and later versions only.
|
|
|
It is recommended that you configure GCC to use the GNU assembler in
|
It is recommended that you configure GCC to use the GNU assembler in
|
`/usr/sfw/bin/gas' but the Sun linker, using the options `--with-gnu-as
|
`/usr/sfw/bin/gas' but the Sun linker, using the options `--with-gnu-as
|
--with-as=/usr/sfw/bin/gas --without-gnu-ld --with-ld=/usr/ccs/bin/ld'.
|
--with-as=/usr/sfw/bin/gas --without-gnu-ld --with-ld=/usr/ccs/bin/ld'.
|
|
|
i?86-*-udk
|
i?86-*-udk
|
==========
|
==========
|
|
|
This target emulates the SCO Universal Development Kit and requires that
|
This target emulates the SCO Universal Development Kit and requires that
|
package be installed. (If it is installed, you will have a
|
package be installed. (If it is installed, you will have a
|
`/udk/usr/ccs/bin/cc' file present.) It's very much like the
|
`/udk/usr/ccs/bin/cc' file present.) It's very much like the
|
`i?86-*-unixware7*' target but is meant to be used when hosting on a
|
`i?86-*-unixware7*' target but is meant to be used when hosting on a
|
system where UDK isn't the default compiler such as OpenServer 5 or
|
system where UDK isn't the default compiler such as OpenServer 5 or
|
Unixware 2. This target will generate binaries that will run on
|
Unixware 2. This target will generate binaries that will run on
|
OpenServer, Unixware 2, or Unixware 7, with the same warnings and
|
OpenServer, Unixware 2, or Unixware 7, with the same warnings and
|
caveats as the SCO UDK.
|
caveats as the SCO UDK.
|
|
|
This target is a little tricky to build because we have to
|
This target is a little tricky to build because we have to
|
distinguish it from the native tools (so it gets headers, startups, and
|
distinguish it from the native tools (so it gets headers, startups, and
|
libraries from the right place) while making the tools not think we're
|
libraries from the right place) while making the tools not think we're
|
actually building a cross compiler. The easiest way to do this is
|
actually building a cross compiler. The easiest way to do this is
|
with a configure command like this:
|
with a configure command like this:
|
|
|
CC=/udk/usr/ccs/bin/cc /YOUR/PATH/TO/gcc/configure \
|
CC=/udk/usr/ccs/bin/cc /YOUR/PATH/TO/gcc/configure \
|
--host=i686-pc-udk --target=i686-pc-udk --program-prefix=udk-
|
--host=i686-pc-udk --target=i686-pc-udk --program-prefix=udk-
|
|
|
_You should substitute `i686' in the above command with the
|
_You should substitute `i686' in the above command with the
|
appropriate processor for your host._
|
appropriate processor for your host._
|
|
|
After the usual `make' and `make install', you can then access the
|
After the usual `make' and `make install', you can then access the
|
UDK-targeted GCC tools by adding `udk-' before the commonly known name.
|
UDK-targeted GCC tools by adding `udk-' before the commonly known name.
|
For example, to invoke the C compiler, you would use `udk-gcc'. They
|
For example, to invoke the C compiler, you would use `udk-gcc'. They
|
will coexist peacefully with any native-target GCC tools you may have
|
will coexist peacefully with any native-target GCC tools you may have
|
installed.
|
installed.
|
|
|
ia64-*-linux
|
ia64-*-linux
|
============
|
============
|
|
|
IA-64 processor (also known as IPF, or Itanium Processor Family)
|
IA-64 processor (also known as IPF, or Itanium Processor Family)
|
running GNU/Linux.
|
running GNU/Linux.
|
|
|
If you are using the installed system libunwind library with
|
If you are using the installed system libunwind library with
|
`--with-system-libunwind', then you must use libunwind 0.98 or later.
|
`--with-system-libunwind', then you must use libunwind 0.98 or later.
|
|
|
None of the following versions of GCC has an ABI that is compatible
|
None of the following versions of GCC has an ABI that is compatible
|
with any of the other versions in this list, with the exception that
|
with any of the other versions in this list, with the exception that
|
Red Hat 2.96 and Trillian 000171 are compatible with each other: 3.1,
|
Red Hat 2.96 and Trillian 000171 are compatible with each other: 3.1,
|
3.0.2, 3.0.1, 3.0, Red Hat 2.96, and Trillian 000717. This primarily
|
3.0.2, 3.0.1, 3.0, Red Hat 2.96, and Trillian 000717. This primarily
|
affects C++ programs and programs that create shared libraries. GCC
|
affects C++ programs and programs that create shared libraries. GCC
|
3.1 or later is recommended for compiling linux, the kernel. As of
|
3.1 or later is recommended for compiling linux, the kernel. As of
|
version 3.1 GCC is believed to be fully ABI compliant, and hence no
|
version 3.1 GCC is believed to be fully ABI compliant, and hence no
|
more major ABI changes are expected.
|
more major ABI changes are expected.
|
|
|
ia64-*-hpux*
|
ia64-*-hpux*
|
============
|
============
|
|
|
Building GCC on this target requires the GNU Assembler. The bundled HP
|
Building GCC on this target requires the GNU Assembler. The bundled HP
|
assembler will not work. To prevent GCC from using the wrong assembler,
|
assembler will not work. To prevent GCC from using the wrong assembler,
|
the option `--with-gnu-as' may be necessary.
|
the option `--with-gnu-as' may be necessary.
|
|
|
The GCC libunwind library has not been ported to HPUX. This means
|
The GCC libunwind library has not been ported to HPUX. This means
|
that for GCC versions 3.2.3 and earlier, `--enable-libunwind-exceptions'
|
that for GCC versions 3.2.3 and earlier, `--enable-libunwind-exceptions'
|
is required to build GCC. For GCC 3.3 and later, this is the default.
|
is required to build GCC. For GCC 3.3 and later, this is the default.
|
For gcc 3.4.3 and later, `--enable-libunwind-exceptions' is removed and
|
For gcc 3.4.3 and later, `--enable-libunwind-exceptions' is removed and
|
the system libunwind library will always be used.
|
the system libunwind library will always be used.
|
|
|
*-ibm-aix*
|
*-ibm-aix*
|
==========
|
==========
|
|
|
Support for AIX version 3 and older was discontinued in GCC 3.4.
|
Support for AIX version 3 and older was discontinued in GCC 3.4.
|
|
|
"out of memory" bootstrap failures may indicate a problem with
|
"out of memory" bootstrap failures may indicate a problem with
|
process resource limits (ulimit). Hard limits are configured in the
|
process resource limits (ulimit). Hard limits are configured in the
|
`/etc/security/limits' system configuration file.
|
`/etc/security/limits' system configuration file.
|
|
|
To speed up the configuration phases of bootstrapping and installing
|
To speed up the configuration phases of bootstrapping and installing
|
GCC, one may use GNU Bash instead of AIX `/bin/sh', e.g.,
|
GCC, one may use GNU Bash instead of AIX `/bin/sh', e.g.,
|
|
|
% CONFIG_SHELL=/opt/freeware/bin/bash
|
% CONFIG_SHELL=/opt/freeware/bin/bash
|
% export CONFIG_SHELL
|
% export CONFIG_SHELL
|
|
|
and then proceed as described in the build instructions, where we
|
and then proceed as described in the build instructions, where we
|
strongly recommend specifying an absolute path to invoke
|
strongly recommend specifying an absolute path to invoke
|
SRCDIR/configure.
|
SRCDIR/configure.
|
|
|
Because GCC on AIX is built as a 32-bit executable by default,
|
Because GCC on AIX is built as a 32-bit executable by default,
|
(although it can generate 64-bit programs) the GMP and MPFR libraries
|
(although it can generate 64-bit programs) the GMP and MPFR libraries
|
required by gfortran must be 32-bit libraries. Building GMP and MPFR
|
required by gfortran must be 32-bit libraries. Building GMP and MPFR
|
as static archive libraries works better than shared libraries.
|
as static archive libraries works better than shared libraries.
|
|
|
Errors involving `alloca' when building GCC generally are due to an
|
Errors involving `alloca' when building GCC generally are due to an
|
incorrect definition of `CC' in the Makefile or mixing files compiled
|
incorrect definition of `CC' in the Makefile or mixing files compiled
|
with the native C compiler and GCC. During the stage1 phase of the
|
with the native C compiler and GCC. During the stage1 phase of the
|
build, the native AIX compiler *must* be invoked as `cc' (not `xlc').
|
build, the native AIX compiler *must* be invoked as `cc' (not `xlc').
|
Once `configure' has been informed of `xlc', one needs to use `make
|
Once `configure' has been informed of `xlc', one needs to use `make
|
distclean' to remove the configure cache files and ensure that `CC'
|
distclean' to remove the configure cache files and ensure that `CC'
|
environment variable does not provide a definition that will confuse
|
environment variable does not provide a definition that will confuse
|
`configure'. If this error occurs during stage2 or later, then the
|
`configure'. If this error occurs during stage2 or later, then the
|
problem most likely is the version of Make (see above).
|
problem most likely is the version of Make (see above).
|
|
|
The native `as' and `ld' are recommended for bootstrapping on AIX 4
|
The native `as' and `ld' are recommended for bootstrapping on AIX 4
|
and required for bootstrapping on AIX 5L. The GNU Assembler reports
|
and required for bootstrapping on AIX 5L. The GNU Assembler reports
|
that it supports WEAK symbols on AIX 4, which causes GCC to try to
|
that it supports WEAK symbols on AIX 4, which causes GCC to try to
|
utilize weak symbol functionality although it is not supported. The GNU
|
utilize weak symbol functionality although it is not supported. The GNU
|
Assembler and Linker do not support AIX 5L sufficiently to bootstrap
|
Assembler and Linker do not support AIX 5L sufficiently to bootstrap
|
GCC. The native AIX tools do interoperate with GCC.
|
GCC. The native AIX tools do interoperate with GCC.
|
|
|
Building `libstdc++.a' requires a fix for an AIX Assembler bug APAR
|
Building `libstdc++.a' requires a fix for an AIX Assembler bug APAR
|
IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1). It also requires a fix
|
IY26685 (AIX 4.3) or APAR IY25528 (AIX 5.1). It also requires a fix
|
for another AIX Assembler bug and a co-dependent AIX Archiver fix
|
for another AIX Assembler bug and a co-dependent AIX Archiver fix
|
referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1)
|
referenced as APAR IY53606 (AIX 5.2) or a APAR IY54774 (AIX 5.1)
|
|
|
`libstdc++' in GCC 3.4 increments the major version number of the
|
`libstdc++' in GCC 3.4 increments the major version number of the
|
shared object and GCC installation places the `libstdc++.a' shared
|
shared object and GCC installation places the `libstdc++.a' shared
|
library in a common location which will overwrite the and GCC 3.3
|
library in a common location which will overwrite the and GCC 3.3
|
version of the shared library. Applications either need to be
|
version of the shared library. Applications either need to be
|
re-linked against the new shared library or the GCC 3.1 and GCC 3.3
|
re-linked against the new shared library or the GCC 3.1 and GCC 3.3
|
versions of the `libstdc++' shared object needs to be available to the
|
versions of the `libstdc++' shared object needs to be available to the
|
AIX runtime loader. The GCC 3.1 `libstdc++.so.4', if present, and GCC
|
AIX runtime loader. The GCC 3.1 `libstdc++.so.4', if present, and GCC
|
3.3 `libstdc++.so.5' shared objects can be installed for runtime
|
3.3 `libstdc++.so.5' shared objects can be installed for runtime
|
dynamic loading using the following steps to set the `F_LOADONLY' flag
|
dynamic loading using the following steps to set the `F_LOADONLY' flag
|
in the shared object for _each_ multilib `libstdc++.a' installed:
|
in the shared object for _each_ multilib `libstdc++.a' installed:
|
|
|
Extract the shared objects from the currently installed
|
Extract the shared objects from the currently installed
|
`libstdc++.a' archive:
|
`libstdc++.a' archive:
|
% ar -x libstdc++.a libstdc++.so.4 libstdc++.so.5
|
% ar -x libstdc++.a libstdc++.so.4 libstdc++.so.5
|
|
|
Enable the `F_LOADONLY' flag so that the shared object will be
|
Enable the `F_LOADONLY' flag so that the shared object will be
|
available for runtime dynamic loading, but not linking:
|
available for runtime dynamic loading, but not linking:
|
% strip -e libstdc++.so.4 libstdc++.so.5
|
% strip -e libstdc++.so.4 libstdc++.so.5
|
|
|
Archive the runtime-only shared object in the GCC 3.4 `libstdc++.a'
|
Archive the runtime-only shared object in the GCC 3.4 `libstdc++.a'
|
archive:
|
archive:
|
% ar -q libstdc++.a libstdc++.so.4 libstdc++.so.5
|
% ar -q libstdc++.a libstdc++.so.4 libstdc++.so.5
|
|
|
Linking executables and shared libraries may produce warnings of
|
Linking executables and shared libraries may produce warnings of
|
duplicate symbols. The assembly files generated by GCC for AIX always
|
duplicate symbols. The assembly files generated by GCC for AIX always
|
have included multiple symbol definitions for certain global variable
|
have included multiple symbol definitions for certain global variable
|
and function declarations in the original program. The warnings should
|
and function declarations in the original program. The warnings should
|
not prevent the linker from producing a correct library or runnable
|
not prevent the linker from producing a correct library or runnable
|
executable.
|
executable.
|
|
|
AIX 4.3 utilizes a "large format" archive to support both 32-bit and
|
AIX 4.3 utilizes a "large format" archive to support both 32-bit and
|
64-bit object modules. The routines provided in AIX 4.3.0 and AIX 4.3.1
|
64-bit object modules. The routines provided in AIX 4.3.0 and AIX 4.3.1
|
to parse archive libraries did not handle the new format correctly.
|
to parse archive libraries did not handle the new format correctly.
|
These routines are used by GCC and result in error messages during
|
These routines are used by GCC and result in error messages during
|
linking such as "not a COFF file". The version of the routines shipped
|
linking such as "not a COFF file". The version of the routines shipped
|
with AIX 4.3.1 should work for a 32-bit environment. The `-g' option
|
with AIX 4.3.1 should work for a 32-bit environment. The `-g' option
|
of the archive command may be used to create archives of 32-bit objects
|
of the archive command may be used to create archives of 32-bit objects
|
using the original "small format". A correct version of the routines
|
using the original "small format". A correct version of the routines
|
is shipped with AIX 4.3.2 and above.
|
is shipped with AIX 4.3.2 and above.
|
|
|
Some versions of the AIX binder (linker) can fail with a relocation
|
Some versions of the AIX binder (linker) can fail with a relocation
|
overflow severe error when the `-bbigtoc' option is used to link
|
overflow severe error when the `-bbigtoc' option is used to link
|
GCC-produced object files into an executable that overflows the TOC. A
|
GCC-produced object files into an executable that overflows the TOC. A
|
fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC)
|
fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND -BBIGTOC)
|
is available from IBM Customer Support and from its
|
is available from IBM Customer Support and from its
|
techsupport.services.ibm.com website as PTF U455193.
|
techsupport.services.ibm.com website as PTF U455193.
|
|
|
The AIX 4.3.2.1 linker (bos.rte.bind_cmds Level 4.3.2.1) will dump
|
The AIX 4.3.2.1 linker (bos.rte.bind_cmds Level 4.3.2.1) will dump
|
core with a segmentation fault when invoked by any version of GCC. A
|
core with a segmentation fault when invoked by any version of GCC. A
|
fix for APAR IX87327 is available from IBM Customer Support and from its
|
fix for APAR IX87327 is available from IBM Customer Support and from its
|
techsupport.services.ibm.com website as PTF U461879. This fix is
|
techsupport.services.ibm.com website as PTF U461879. This fix is
|
incorporated in AIX 4.3.3 and above.
|
incorporated in AIX 4.3.3 and above.
|
|
|
The initial assembler shipped with AIX 4.3.0 generates incorrect
|
The initial assembler shipped with AIX 4.3.0 generates incorrect
|
object files. A fix for APAR IX74254 (64BIT DISASSEMBLED OUTPUT FROM
|
object files. A fix for APAR IX74254 (64BIT DISASSEMBLED OUTPUT FROM
|
COMPILER FAILS TO ASSEMBLE/BIND) is available from IBM Customer Support
|
COMPILER FAILS TO ASSEMBLE/BIND) is available from IBM Customer Support
|
and from its techsupport.services.ibm.com website as PTF U453956. This
|
and from its techsupport.services.ibm.com website as PTF U453956. This
|
fix is incorporated in AIX 4.3.1 and above.
|
fix is incorporated in AIX 4.3.1 and above.
|
|
|
AIX provides National Language Support (NLS). Compilers and
|
AIX provides National Language Support (NLS). Compilers and
|
assemblers use NLS to support locale-specific representations of
|
assemblers use NLS to support locale-specific representations of
|
various data formats including floating-point numbers (e.g., `.' vs
|
various data formats including floating-point numbers (e.g., `.' vs
|
`,' for separating decimal fractions). There have been problems
|
`,' for separating decimal fractions). There have been problems
|
reported where GCC does not produce the same floating-point formats
|
reported where GCC does not produce the same floating-point formats
|
that the assembler expects. If one encounters this problem, set the
|
that the assembler expects. If one encounters this problem, set the
|
`LANG' environment variable to `C' or `En_US'.
|
`LANG' environment variable to `C' or `En_US'.
|
|
|
By default, GCC for AIX 4.1 and above produces code that can be used
|
By default, GCC for AIX 4.1 and above produces code that can be used
|
on both Power or PowerPC processors.
|
on both Power or PowerPC processors.
|
|
|
A default can be specified with the `-mcpu=CPU_TYPE' switch and
|
A default can be specified with the `-mcpu=CPU_TYPE' switch and
|
using the configure option `--with-cpu-CPU_TYPE'.
|
using the configure option `--with-cpu-CPU_TYPE'.
|
|
|
iq2000-*-elf
|
iq2000-*-elf
|
============
|
============
|
|
|
Vitesse IQ2000 processors. These are used in embedded applications.
|
Vitesse IQ2000 processors. These are used in embedded applications.
|
There are no standard Unix configurations.
|
There are no standard Unix configurations.
|
|
|
m32c-*-elf
|
m32c-*-elf
|
==========
|
==========
|
|
|
Renesas M32C processor. This configuration is intended for embedded
|
Renesas M32C processor. This configuration is intended for embedded
|
systems.
|
systems.
|
|
|
m32r-*-elf
|
m32r-*-elf
|
==========
|
==========
|
|
|
Renesas M32R processor. This configuration is intended for embedded
|
Renesas M32R processor. This configuration is intended for embedded
|
systems.
|
systems.
|
|
|
m6811-elf
|
m6811-elf
|
=========
|
=========
|
|
|
Motorola 68HC11 family micro controllers. These are used in embedded
|
Motorola 68HC11 family micro controllers. These are used in embedded
|
applications. There are no standard Unix configurations.
|
applications. There are no standard Unix configurations.
|
|
|
m6812-elf
|
m6812-elf
|
=========
|
=========
|
|
|
Motorola 68HC12 family micro controllers. These are used in embedded
|
Motorola 68HC12 family micro controllers. These are used in embedded
|
applications. There are no standard Unix configurations.
|
applications. There are no standard Unix configurations.
|
|
|
m68k-hp-hpux
|
m68k-hp-hpux
|
============
|
============
|
|
|
HP 9000 series 300 or 400 running HP-UX. HP-UX version 8.0 has a bug in
|
HP 9000 series 300 or 400 running HP-UX. HP-UX version 8.0 has a bug in
|
the assembler that prevents compilation of GCC. This bug manifests
|
the assembler that prevents compilation of GCC. This bug manifests
|
itself during the first stage of compilation, while building
|
itself during the first stage of compilation, while building
|
`libgcc2.a':
|
`libgcc2.a':
|
|
|
_floatdisf
|
_floatdisf
|
cc1: warning: `-g' option not supported on this version of GCC
|
cc1: warning: `-g' option not supported on this version of GCC
|
cc1: warning: `-g1' option not supported on this version of GCC
|
cc1: warning: `-g1' option not supported on this version of GCC
|
./xgcc: Internal compiler error: program as got fatal signal 11
|
./xgcc: Internal compiler error: program as got fatal signal 11
|
|
|
A patched version of the assembler is available as the file
|
A patched version of the assembler is available as the file
|
`ftp://altdorf.ai.mit.edu/archive/cph/hpux-8.0-assembler'. If you have
|
`ftp://altdorf.ai.mit.edu/archive/cph/hpux-8.0-assembler'. If you have
|
HP software support, the patch can also be obtained directly from HP,
|
HP software support, the patch can also be obtained directly from HP,
|
as described in the following note:
|
as described in the following note:
|
|
|
This is the patched assembler, to patch SR#1653-010439, where the
|
This is the patched assembler, to patch SR#1653-010439, where the
|
assembler aborts on floating point constants.
|
assembler aborts on floating point constants.
|
|
|
The bug is not really in the assembler, but in the shared library
|
The bug is not really in the assembler, but in the shared library
|
version of the function "cvtnum(3c)". The bug on "cvtnum(3c)" is
|
version of the function "cvtnum(3c)". The bug on "cvtnum(3c)" is
|
SR#4701-078451. Anyway, the attached assembler uses the archive
|
SR#4701-078451. Anyway, the attached assembler uses the archive
|
library version of "cvtnum(3c)" and thus does not exhibit the bug.
|
library version of "cvtnum(3c)" and thus does not exhibit the bug.
|
|
|
This patch is also known as PHCO_4484.
|
This patch is also known as PHCO_4484.
|
|
|
In addition gdb does not understand that native HP-UX format, so you
|
In addition gdb does not understand that native HP-UX format, so you
|
must use gas if you wish to use gdb.
|
must use gas if you wish to use gdb.
|
|
|
On HP-UX version 8.05, but not on 8.07 or more recent versions, the
|
On HP-UX version 8.05, but not on 8.07 or more recent versions, the
|
`fixproto' shell script triggers a bug in the system shell. If you
|
`fixproto' shell script triggers a bug in the system shell. If you
|
encounter this problem, upgrade your operating system or use BASH (the
|
encounter this problem, upgrade your operating system or use BASH (the
|
GNU shell) to run `fixproto'. This bug will cause the fixproto program
|
GNU shell) to run `fixproto'. This bug will cause the fixproto program
|
to report an error of the form:
|
to report an error of the form:
|
|
|
./fixproto: sh internal 1K buffer overflow
|
./fixproto: sh internal 1K buffer overflow
|
|
|
To fix this, you can also change the first line of the fixproto
|
To fix this, you can also change the first line of the fixproto
|
script to look like:
|
script to look like:
|
|
|
#!/bin/ksh
|
#!/bin/ksh
|
|
|
mips-*-*
|
mips-*-*
|
========
|
========
|
|
|
If on a MIPS system you get an error message saying "does not have gp
|
If on a MIPS system you get an error message saying "does not have gp
|
sections for all it's [sic] sectons [sic]", don't worry about it. This
|
sections for all it's [sic] sectons [sic]", don't worry about it. This
|
happens whenever you use GAS with the MIPS linker, but there is not
|
happens whenever you use GAS with the MIPS linker, but there is not
|
really anything wrong, and it is okay to use the output file. You can
|
really anything wrong, and it is okay to use the output file. You can
|
stop such warnings by installing the GNU linker.
|
stop such warnings by installing the GNU linker.
|
|
|
It would be nice to extend GAS to produce the gp tables, but they are
|
It would be nice to extend GAS to produce the gp tables, but they are
|
optional, and there should not be a warning about their absence.
|
optional, and there should not be a warning about their absence.
|
|
|
The libstdc++ atomic locking routines for MIPS targets requires MIPS
|
The libstdc++ atomic locking routines for MIPS targets requires MIPS
|
II and later. A patch went in just after the GCC 3.3 release to make
|
II and later. A patch went in just after the GCC 3.3 release to make
|
`mips*-*-*' use the generic implementation instead. You can also
|
`mips*-*-*' use the generic implementation instead. You can also
|
configure for `mipsel-elf' as a workaround. The `mips*-*-linux*'
|
configure for `mipsel-elf' as a workaround. The `mips*-*-linux*'
|
target continues to use the MIPS II routines. More work on this is
|
target continues to use the MIPS II routines. More work on this is
|
expected in future releases.
|
expected in future releases.
|
|
|
MIPS systems check for division by zero (unless
|
MIPS systems check for division by zero (unless
|
`-mno-check-zero-division' is passed to the compiler) by generating
|
`-mno-check-zero-division' is passed to the compiler) by generating
|
either a conditional trap or a break instruction. Using trap results
|
either a conditional trap or a break instruction. Using trap results
|
in smaller code, but is only supported on MIPS II and later. Also,
|
in smaller code, but is only supported on MIPS II and later. Also,
|
some versions of the Linux kernel have a bug that prevents trap from
|
some versions of the Linux kernel have a bug that prevents trap from
|
generating the proper signal (`SIGFPE'). To enable the use of break,
|
generating the proper signal (`SIGFPE'). To enable the use of break,
|
use the `--with-divide=breaks' `configure' option when configuring GCC.
|
use the `--with-divide=breaks' `configure' option when configuring GCC.
|
The default is to use traps on systems that support them.
|
The default is to use traps on systems that support them.
|
|
|
Cross-compilers for the MIPS as target using the MIPS assembler
|
Cross-compilers for the MIPS as target using the MIPS assembler
|
currently do not work, because the auxiliary programs `mips-tdump.c'
|
currently do not work, because the auxiliary programs `mips-tdump.c'
|
and `mips-tfile.c' can't be compiled on anything but a MIPS. It does
|
and `mips-tfile.c' can't be compiled on anything but a MIPS. It does
|
work to cross compile for a MIPS if you use the GNU assembler and
|
work to cross compile for a MIPS if you use the GNU assembler and
|
linker.
|
linker.
|
|
|
The assembler from GNU binutils 2.17 and earlier has a bug in the way
|
The assembler from GNU binutils 2.17 and earlier has a bug in the way
|
it sorts relocations for REL targets (o32, o64, EABI). This can cause
|
it sorts relocations for REL targets (o32, o64, EABI). This can cause
|
bad code to be generated for simple C++ programs. Also the linker from
|
bad code to be generated for simple C++ programs. Also the linker from
|
GNU binutils versions prior to 2.17 has a bug which causes the runtime
|
GNU binutils versions prior to 2.17 has a bug which causes the runtime
|
linker stubs in very large programs, like `libgcj.so', to be
|
linker stubs in very large programs, like `libgcj.so', to be
|
incorrectly generated. Binutils CVS snapshots and releases made after
|
incorrectly generated. Binutils CVS snapshots and releases made after
|
Nov. 9, 2006 are thought to be free from both of these problems.
|
Nov. 9, 2006 are thought to be free from both of these problems.
|
|
|
mips-sgi-irix5
|
mips-sgi-irix5
|
==============
|
==============
|
|
|
In order to compile GCC on an SGI running IRIX 5, the `compiler_dev.hdr'
|
In order to compile GCC on an SGI running IRIX 5, the `compiler_dev.hdr'
|
subsystem must be installed from the IDO CD-ROM supplied by SGI. It is
|
subsystem must be installed from the IDO CD-ROM supplied by SGI. It is
|
also available for download from
|
also available for download from
|
`ftp://ftp.sgi.com/sgi/IRIX5.3/iris-development-option-5.3.tardist'.
|
`ftp://ftp.sgi.com/sgi/IRIX5.3/iris-development-option-5.3.tardist'.
|
|
|
If you use the MIPS C compiler to bootstrap, it may be necessary to
|
If you use the MIPS C compiler to bootstrap, it may be necessary to
|
increase its table size for switch statements with the `-Wf,-XNg1500'
|
increase its table size for switch statements with the `-Wf,-XNg1500'
|
option. If you use the `-O2' optimization option, you also need to use
|
option. If you use the `-O2' optimization option, you also need to use
|
`-Olimit 3000'.
|
`-Olimit 3000'.
|
|
|
To enable debugging under IRIX 5, you must use GNU binutils 2.15 or
|
To enable debugging under IRIX 5, you must use GNU binutils 2.15 or
|
later, and use the `--with-gnu-ld' `configure' option when configuring
|
later, and use the `--with-gnu-ld' `configure' option when configuring
|
GCC. You need to use GNU `ar' and `nm', also distributed with GNU
|
GCC. You need to use GNU `ar' and `nm', also distributed with GNU
|
binutils.
|
binutils.
|
|
|
Some users have reported that `/bin/sh' will hang during bootstrap.
|
Some users have reported that `/bin/sh' will hang during bootstrap.
|
This problem can be avoided by running the commands:
|
This problem can be avoided by running the commands:
|
|
|
% CONFIG_SHELL=/bin/ksh
|
% CONFIG_SHELL=/bin/ksh
|
% export CONFIG_SHELL
|
% export CONFIG_SHELL
|
|
|
before starting the build.
|
before starting the build.
|
|
|
mips-sgi-irix6
|
mips-sgi-irix6
|
==============
|
==============
|
|
|
If you are using SGI's MIPSpro `cc' as your bootstrap compiler, you must
|
If you are using SGI's MIPSpro `cc' as your bootstrap compiler, you must
|
ensure that the N32 ABI is in use. To test this, compile a simple C
|
ensure that the N32 ABI is in use. To test this, compile a simple C
|
file with `cc' and then run `file' on the resulting object file. The
|
file with `cc' and then run `file' on the resulting object file. The
|
output should look like:
|
output should look like:
|
|
|
test.o: ELF N32 MSB ...
|
test.o: ELF N32 MSB ...
|
|
|
If you see:
|
If you see:
|
|
|
test.o: ELF 32-bit MSB ...
|
test.o: ELF 32-bit MSB ...
|
|
|
or
|
or
|
|
|
test.o: ELF 64-bit MSB ...
|
test.o: ELF 64-bit MSB ...
|
|
|
then your version of `cc' uses the O32 or N64 ABI by default. You
|
then your version of `cc' uses the O32 or N64 ABI by default. You
|
should set the environment variable `CC' to `cc -n32' before
|
should set the environment variable `CC' to `cc -n32' before
|
configuring GCC.
|
configuring GCC.
|
|
|
If you want the resulting `gcc' to run on old 32-bit systems with
|
If you want the resulting `gcc' to run on old 32-bit systems with
|
the MIPS R4400 CPU, you need to ensure that only code for the `mips3'
|
the MIPS R4400 CPU, you need to ensure that only code for the `mips3'
|
instruction set architecture (ISA) is generated. While GCC 3.x does
|
instruction set architecture (ISA) is generated. While GCC 3.x does
|
this correctly, both GCC 2.95 and SGI's MIPSpro `cc' may change the ISA
|
this correctly, both GCC 2.95 and SGI's MIPSpro `cc' may change the ISA
|
depending on the machine where GCC is built. Using one of them as the
|
depending on the machine where GCC is built. Using one of them as the
|
bootstrap compiler may result in `mips4' code, which won't run at all
|
bootstrap compiler may result in `mips4' code, which won't run at all
|
on `mips3'-only systems. For the test program above, you should see:
|
on `mips3'-only systems. For the test program above, you should see:
|
|
|
test.o: ELF N32 MSB mips-3 ...
|
test.o: ELF N32 MSB mips-3 ...
|
|
|
If you get:
|
If you get:
|
|
|
test.o: ELF N32 MSB mips-4 ...
|
test.o: ELF N32 MSB mips-4 ...
|
|
|
instead, you should set the environment variable `CC' to `cc -n32
|
instead, you should set the environment variable `CC' to `cc -n32
|
-mips3' or `gcc -mips3' respectively before configuring GCC.
|
-mips3' or `gcc -mips3' respectively before configuring GCC.
|
|
|
MIPSpro C 7.4 may cause bootstrap failures, due to a bug when
|
MIPSpro C 7.4 may cause bootstrap failures, due to a bug when
|
inlining `memcmp'. Either add `-U__INLINE_INTRINSICS' to the `CC'
|
inlining `memcmp'. Either add `-U__INLINE_INTRINSICS' to the `CC'
|
environment variable as a workaround or upgrade to MIPSpro C 7.4.1m.
|
environment variable as a workaround or upgrade to MIPSpro C 7.4.1m.
|
|
|
GCC on IRIX 6 is usually built to support the N32, O32 and N64 ABIs.
|
GCC on IRIX 6 is usually built to support the N32, O32 and N64 ABIs.
|
If you build GCC on a system that doesn't have the N64 libraries
|
If you build GCC on a system that doesn't have the N64 libraries
|
installed or cannot run 64-bit binaries, you need to configure with
|
installed or cannot run 64-bit binaries, you need to configure with
|
`--disable-multilib' so GCC doesn't try to use them. This will disable
|
`--disable-multilib' so GCC doesn't try to use them. This will disable
|
building the O32 libraries, too. Look for `/usr/lib64/libc.so.1' to
|
building the O32 libraries, too. Look for `/usr/lib64/libc.so.1' to
|
see if you have the 64-bit libraries installed.
|
see if you have the 64-bit libraries installed.
|
|
|
To enable debugging for the O32 ABI, you must use GNU `as' from GNU
|
To enable debugging for the O32 ABI, you must use GNU `as' from GNU
|
binutils 2.15 or later. You may also use GNU `ld', but this is not
|
binutils 2.15 or later. You may also use GNU `ld', but this is not
|
required and currently causes some problems with Ada.
|
required and currently causes some problems with Ada.
|
|
|
The `--enable-threads' option doesn't currently work, a patch is in
|
The `--enable-threads' option doesn't currently work, a patch is in
|
preparation for a future release. The `--enable-libgcj' option is
|
preparation for a future release. The `--enable-libgcj' option is
|
disabled by default: IRIX 6 uses a very low default limit (20480) for
|
disabled by default: IRIX 6 uses a very low default limit (20480) for
|
the command line length. Although `libtool' contains a workaround for
|
the command line length. Although `libtool' contains a workaround for
|
this problem, at least the N64 `libgcj' is known not to build despite
|
this problem, at least the N64 `libgcj' is known not to build despite
|
this, running into an internal error of the native `ld'. A sure fix is
|
this, running into an internal error of the native `ld'. A sure fix is
|
to increase this limit (`ncargs') to its maximum of 262144 bytes. If
|
to increase this limit (`ncargs') to its maximum of 262144 bytes. If
|
you have root access, you can use the `systune' command to do this.
|
you have root access, you can use the `systune' command to do this.
|
|
|
`wchar_t' support in `libstdc++' is not available for old IRIX 6.5.x
|
`wchar_t' support in `libstdc++' is not available for old IRIX 6.5.x
|
releases, x < 19. The problem cannot be autodetected and in order to
|
releases, x < 19. The problem cannot be autodetected and in order to
|
build GCC for such targets you need to configure with
|
build GCC for such targets you need to configure with
|
`--disable-wchar_t'.
|
`--disable-wchar_t'.
|
|
|
See `http://freeware.sgi.com/' for more information about using GCC
|
See `http://freeware.sgi.com/' for more information about using GCC
|
on IRIX platforms.
|
on IRIX platforms.
|
|
|
powerpc-*-*
|
powerpc-*-*
|
===========
|
===========
|
|
|
You can specify a default version for the `-mcpu=CPU_TYPE' switch by
|
You can specify a default version for the `-mcpu=CPU_TYPE' switch by
|
using the configure option `--with-cpu-CPU_TYPE'.
|
using the configure option `--with-cpu-CPU_TYPE'.
|
|
|
powerpc-*-darwin*
|
powerpc-*-darwin*
|
=================
|
=================
|
|
|
PowerPC running Darwin (Mac OS X kernel).
|
PowerPC running Darwin (Mac OS X kernel).
|
|
|
Pre-installed versions of Mac OS X may not include any developer
|
Pre-installed versions of Mac OS X may not include any developer
|
tools, meaning that you will not be able to build GCC from source. Tool
|
tools, meaning that you will not be able to build GCC from source. Tool
|
binaries are available at
|
binaries are available at
|
`http://developer.apple.com/darwin/projects/compiler/' (free
|
`http://developer.apple.com/darwin/projects/compiler/' (free
|
registration required).
|
registration required).
|
|
|
This version of GCC requires at least cctools-590.7.
|
This version of GCC requires at least cctools-590.7.
|
|
|
The version of GCC shipped by Apple typically includes a number of
|
The version of GCC shipped by Apple typically includes a number of
|
extensions not available in a standard GCC release. These extensions
|
extensions not available in a standard GCC release. These extensions
|
are generally for backwards compatibility and best avoided.
|
are generally for backwards compatibility and best avoided.
|
|
|
powerpc-*-elf, powerpc-*-sysv4
|
powerpc-*-elf, powerpc-*-sysv4
|
==============================
|
==============================
|
|
|
PowerPC system in big endian mode, running System V.4.
|
PowerPC system in big endian mode, running System V.4.
|
|
|
powerpc*-*-linux-gnu*
|
powerpc*-*-linux-gnu*
|
=====================
|
=====================
|
|
|
You will need binutils 2.15 or newer for a working GCC.
|
You will need binutils 2.15 or newer for a working GCC.
|
|
|
powerpc-*-netbsd*
|
powerpc-*-netbsd*
|
=================
|
=================
|
|
|
PowerPC system in big endian mode running NetBSD. To build the
|
PowerPC system in big endian mode running NetBSD. To build the
|
documentation you will need Texinfo version 4.4 (NetBSD 1.5.1 included
|
documentation you will need Texinfo version 4.4 (NetBSD 1.5.1 included
|
Texinfo version 3.12).
|
Texinfo version 3.12).
|
|
|
powerpc-*-eabisim
|
powerpc-*-eabisim
|
=================
|
=================
|
|
|
Embedded PowerPC system in big endian mode for use in running under the
|
Embedded PowerPC system in big endian mode for use in running under the
|
PSIM simulator.
|
PSIM simulator.
|
|
|
powerpc-*-eabi
|
powerpc-*-eabi
|
==============
|
==============
|
|
|
Embedded PowerPC system in big endian mode.
|
Embedded PowerPC system in big endian mode.
|
|
|
powerpcle-*-elf, powerpcle-*-sysv4
|
powerpcle-*-elf, powerpcle-*-sysv4
|
==================================
|
==================================
|
|
|
PowerPC system in little endian mode, running System V.4.
|
PowerPC system in little endian mode, running System V.4.
|
|
|
powerpcle-*-eabisim
|
powerpcle-*-eabisim
|
===================
|
===================
|
|
|
Embedded PowerPC system in little endian mode for use in running under
|
Embedded PowerPC system in little endian mode for use in running under
|
the PSIM simulator.
|
the PSIM simulator.
|
|
|
powerpcle-*-eabi
|
powerpcle-*-eabi
|
================
|
================
|
|
|
Embedded PowerPC system in little endian mode.
|
Embedded PowerPC system in little endian mode.
|
|
|
s390-*-linux*
|
s390-*-linux*
|
=============
|
=============
|
|
|
S/390 system running GNU/Linux for S/390.
|
S/390 system running GNU/Linux for S/390.
|
|
|
s390x-*-linux*
|
s390x-*-linux*
|
==============
|
==============
|
|
|
zSeries system (64-bit) running GNU/Linux for zSeries.
|
zSeries system (64-bit) running GNU/Linux for zSeries.
|
|
|
s390x-ibm-tpf*
|
s390x-ibm-tpf*
|
==============
|
==============
|
|
|
zSeries system (64-bit) running TPF. This platform is supported as
|
zSeries system (64-bit) running TPF. This platform is supported as
|
cross-compilation target only.
|
cross-compilation target only.
|
|
|
*-*-solaris2*
|
*-*-solaris2*
|
=============
|
=============
|
|
|
Sun does not ship a C compiler with Solaris 2. To bootstrap and install
|
Sun does not ship a C compiler with Solaris 2. To bootstrap and install
|
GCC you first have to install a pre-built compiler, see the binaries
|
GCC you first have to install a pre-built compiler, see the binaries
|
page for details.
|
page for details.
|
|
|
The Solaris 2 `/bin/sh' will often fail to configure `libstdc++-v3',
|
The Solaris 2 `/bin/sh' will often fail to configure `libstdc++-v3',
|
`boehm-gc' or `libjava'. We therefore recommend using the following
|
`boehm-gc' or `libjava'. We therefore recommend using the following
|
initial sequence of commands
|
initial sequence of commands
|
|
|
% CONFIG_SHELL=/bin/ksh
|
% CONFIG_SHELL=/bin/ksh
|
% export CONFIG_SHELL
|
% export CONFIG_SHELL
|
|
|
and proceed as described in the configure instructions. In addition
|
and proceed as described in the configure instructions. In addition
|
we strongly recommend specifying an absolute path to invoke
|
we strongly recommend specifying an absolute path to invoke
|
SRCDIR/configure.
|
SRCDIR/configure.
|
|
|
Solaris 2 comes with a number of optional OS packages. Some of these
|
Solaris 2 comes with a number of optional OS packages. Some of these
|
are needed to use GCC fully, namely `SUNWarc', `SUNWbtool', `SUNWesu',
|
are needed to use GCC fully, namely `SUNWarc', `SUNWbtool', `SUNWesu',
|
`SUNWhea', `SUNWlibm', `SUNWsprot', and `SUNWtoo'. If you did not
|
`SUNWhea', `SUNWlibm', `SUNWsprot', and `SUNWtoo'. If you did not
|
install all optional packages when installing Solaris 2, you will need
|
install all optional packages when installing Solaris 2, you will need
|
to verify that the packages that GCC needs are installed.
|
to verify that the packages that GCC needs are installed.
|
|
|
To check whether an optional package is installed, use the `pkginfo'
|
To check whether an optional package is installed, use the `pkginfo'
|
command. To add an optional package, use the `pkgadd' command. For
|
command. To add an optional package, use the `pkgadd' command. For
|
further details, see the Solaris 2 documentation.
|
further details, see the Solaris 2 documentation.
|
|
|
Trying to use the linker and other tools in `/usr/ucb' to install
|
Trying to use the linker and other tools in `/usr/ucb' to install
|
GCC has been observed to cause trouble. For example, the linker may
|
GCC has been observed to cause trouble. For example, the linker may
|
hang indefinitely. The fix is to remove `/usr/ucb' from your `PATH'.
|
hang indefinitely. The fix is to remove `/usr/ucb' from your `PATH'.
|
|
|
The build process works more smoothly with the legacy Sun tools so,
|
The build process works more smoothly with the legacy Sun tools so,
|
if you have `/usr/xpg4/bin' in your `PATH', we recommend that you place
|
if you have `/usr/xpg4/bin' in your `PATH', we recommend that you place
|
`/usr/bin' before `/usr/xpg4/bin' for the duration of the build.
|
`/usr/bin' before `/usr/xpg4/bin' for the duration of the build.
|
|
|
All releases of GNU binutils prior to 2.11.2 have known bugs on this
|
All releases of GNU binutils prior to 2.11.2 have known bugs on this
|
platform. We recommend the use of GNU binutils 2.11.2 or later, or the
|
platform. We recommend the use of GNU binutils 2.11.2 or later, or the
|
vendor tools (Sun `as', Sun `ld'). Note that your mileage may vary if
|
vendor tools (Sun `as', Sun `ld'). Note that your mileage may vary if
|
you use a combination of the GNU tools and the Sun tools: while the
|
you use a combination of the GNU tools and the Sun tools: while the
|
combination GNU `as' + Sun `ld' should reasonably work, the reverse
|
combination GNU `as' + Sun `ld' should reasonably work, the reverse
|
combination Sun `as' + GNU `ld' is known to cause memory corruption at
|
combination Sun `as' + GNU `ld' is known to cause memory corruption at
|
runtime in some cases for C++ programs.
|
runtime in some cases for C++ programs.
|
|
|
The stock GNU binutils 2.15 release is broken on this platform
|
The stock GNU binutils 2.15 release is broken on this platform
|
because of a single bug. It has been fixed on the 2.15 branch in the
|
because of a single bug. It has been fixed on the 2.15 branch in the
|
CVS repository. You can obtain a working version by checking out the
|
CVS repository. You can obtain a working version by checking out the
|
binutils-2_15-branch from the CVS repository or applying the patch
|
binutils-2_15-branch from the CVS repository or applying the patch
|
`http://sourceware.org/ml/binutils-cvs/2004-09/msg00036.html' to the
|
`http://sourceware.org/ml/binutils-cvs/2004-09/msg00036.html' to the
|
release.
|
release.
|
|
|
We recommend using GNU binutils 2.16 or later in conjunction with
|
We recommend using GNU binutils 2.16 or later in conjunction with
|
GCC 4.x, or the vendor tools (Sun `as', Sun `ld'). However, for
|
GCC 4.x, or the vendor tools (Sun `as', Sun `ld'). However, for
|
Solaris 10 and above, an additional patch is required in order for the
|
Solaris 10 and above, an additional patch is required in order for the
|
GNU linker to be able to cope with a new flavor of shared libraries.
|
GNU linker to be able to cope with a new flavor of shared libraries.
|
You can obtain a working version by checking out the
|
You can obtain a working version by checking out the
|
binutils-2_16-branch from the CVS repository or applying the patch
|
binutils-2_16-branch from the CVS repository or applying the patch
|
`http://sourceware.org/ml/binutils-cvs/2005-07/msg00122.html' to the
|
`http://sourceware.org/ml/binutils-cvs/2005-07/msg00122.html' to the
|
release.
|
release.
|
|
|
Sun bug 4296832 turns up when compiling X11 headers with GCC 2.95 or
|
Sun bug 4296832 turns up when compiling X11 headers with GCC 2.95 or
|
newer: `g++' will complain that types are missing. These headers assume
|
newer: `g++' will complain that types are missing. These headers assume
|
that omitting the type means `int'; this assumption worked for C89 but
|
that omitting the type means `int'; this assumption worked for C89 but
|
is wrong for C++, and is now wrong for C99 also.
|
is wrong for C++, and is now wrong for C99 also.
|
|
|
`g++' accepts such (invalid) constructs with the option
|
`g++' accepts such (invalid) constructs with the option
|
`-fpermissive'; it will assume that any missing type is `int' (as
|
`-fpermissive'; it will assume that any missing type is `int' (as
|
defined by C89).
|
defined by C89).
|
|
|
There are patches for Solaris 2.6 (105633-56 or newer for SPARC,
|
There are patches for Solaris 2.6 (105633-56 or newer for SPARC,
|
106248-42 or newer for Intel), Solaris 7 (108376-21 or newer for SPARC,
|
106248-42 or newer for Intel), Solaris 7 (108376-21 or newer for SPARC,
|
108377-20 for Intel), and Solaris 8 (108652-24 or newer for SPARC,
|
108377-20 for Intel), and Solaris 8 (108652-24 or newer for SPARC,
|
108653-22 for Intel) that fix this bug.
|
108653-22 for Intel) that fix this bug.
|
|
|
Sun bug 4927647 sometimes causes random spurious testsuite failures
|
Sun bug 4927647 sometimes causes random spurious testsuite failures
|
related to missing diagnostic output. This bug doesn't affect GCC
|
related to missing diagnostic output. This bug doesn't affect GCC
|
itself, rather it is a kernel bug triggered by the `expect' program
|
itself, rather it is a kernel bug triggered by the `expect' program
|
which is used only by the GCC testsuite driver. When the bug causes
|
which is used only by the GCC testsuite driver. When the bug causes
|
the `expect' program to miss anticipated output, extra testsuite
|
the `expect' program to miss anticipated output, extra testsuite
|
failures appear.
|
failures appear.
|
|
|
There are patches for Solaris 8 (117350-12 or newer for SPARC,
|
There are patches for Solaris 8 (117350-12 or newer for SPARC,
|
117351-12 or newer for Intel) and Solaris 9 (117171-11 or newer for
|
117351-12 or newer for Intel) and Solaris 9 (117171-11 or newer for
|
SPARC, 117172-11 or newer for Intel) that address this problem.
|
SPARC, 117172-11 or newer for Intel) that address this problem.
|
|
|
sparc-sun-solaris2*
|
sparc-sun-solaris2*
|
===================
|
===================
|
|
|
When GCC is configured to use binutils 2.11.2 or later the binaries
|
When GCC is configured to use binutils 2.11.2 or later the binaries
|
produced are smaller than the ones produced using Sun's native tools;
|
produced are smaller than the ones produced using Sun's native tools;
|
this difference is quite significant for binaries containing debugging
|
this difference is quite significant for binaries containing debugging
|
information.
|
information.
|
|
|
Sun `as' 4.x is broken in that it cannot cope with long symbol names.
|
Sun `as' 4.x is broken in that it cannot cope with long symbol names.
|
A typical error message might look similar to the following:
|
A typical error message might look similar to the following:
|
|
|
/usr/ccs/bin/as: "/var/tmp/ccMsw135.s", line 11041: error:
|
/usr/ccs/bin/as: "/var/tmp/ccMsw135.s", line 11041: error:
|
can't compute value of an expression involving an external symbol.
|
can't compute value of an expression involving an external symbol.
|
|
|
This is Sun bug 4237974. This is fixed with patch 108908-02 for
|
This is Sun bug 4237974. This is fixed with patch 108908-02 for
|
Solaris 2.6 and has been fixed in later (5.x) versions of the assembler,
|
Solaris 2.6 and has been fixed in later (5.x) versions of the assembler,
|
starting with Solaris 7.
|
starting with Solaris 7.
|
|
|
Starting with Solaris 7, the operating system is capable of executing
|
Starting with Solaris 7, the operating system is capable of executing
|
64-bit SPARC V9 binaries. GCC 3.1 and later properly supports this;
|
64-bit SPARC V9 binaries. GCC 3.1 and later properly supports this;
|
the `-m64' option enables 64-bit code generation. However, if all you
|
the `-m64' option enables 64-bit code generation. However, if all you
|
want is code tuned for the UltraSPARC CPU, you should try the
|
want is code tuned for the UltraSPARC CPU, you should try the
|
`-mtune=ultrasparc' option instead, which produces code that, unlike
|
`-mtune=ultrasparc' option instead, which produces code that, unlike
|
full 64-bit code, can still run on non-UltraSPARC machines.
|
full 64-bit code, can still run on non-UltraSPARC machines.
|
|
|
When configuring on a Solaris 7 or later system that is running a
|
When configuring on a Solaris 7 or later system that is running a
|
kernel that supports only 32-bit binaries, one must configure with
|
kernel that supports only 32-bit binaries, one must configure with
|
`--disable-multilib', since we will not be able to build the 64-bit
|
`--disable-multilib', since we will not be able to build the 64-bit
|
target libraries.
|
target libraries.
|
|
|
GCC 3.3 and GCC 3.4 trigger code generation bugs in earlier versions
|
GCC 3.3 and GCC 3.4 trigger code generation bugs in earlier versions
|
of the GNU compiler (especially GCC 3.0.x versions), which lead to the
|
of the GNU compiler (especially GCC 3.0.x versions), which lead to the
|
miscompilation of the stage1 compiler and the subsequent failure of the
|
miscompilation of the stage1 compiler and the subsequent failure of the
|
bootstrap process. A workaround is to use GCC 3.2.3 as an intermediary
|
bootstrap process. A workaround is to use GCC 3.2.3 as an intermediary
|
stage, i.e. to bootstrap that compiler with the base compiler and then
|
stage, i.e. to bootstrap that compiler with the base compiler and then
|
use it to bootstrap the final compiler.
|
use it to bootstrap the final compiler.
|
|
|
GCC 3.4 triggers a code generation bug in versions 5.4 (Sun ONE
|
GCC 3.4 triggers a code generation bug in versions 5.4 (Sun ONE
|
Studio 7) and 5.5 (Sun ONE Studio 8) of the Sun compiler, which causes
|
Studio 7) and 5.5 (Sun ONE Studio 8) of the Sun compiler, which causes
|
a bootstrap failure in form of a miscompilation of the stage1 compiler
|
a bootstrap failure in form of a miscompilation of the stage1 compiler
|
by the Sun compiler. This is Sun bug 4974440. This is fixed with
|
by the Sun compiler. This is Sun bug 4974440. This is fixed with
|
patch 112760-07.
|
patch 112760-07.
|
|
|
GCC 3.4 changed the default debugging format from STABS to DWARF-2
|
GCC 3.4 changed the default debugging format from STABS to DWARF-2
|
for 32-bit code on Solaris 7 and later. If you use the Sun assembler,
|
for 32-bit code on Solaris 7 and later. If you use the Sun assembler,
|
this change apparently runs afoul of Sun bug 4910101 (which is
|
this change apparently runs afoul of Sun bug 4910101 (which is
|
referenced as a x86-only problem by Sun, probably because they do not
|
referenced as a x86-only problem by Sun, probably because they do not
|
use DWARF-2). A symptom of the problem is that you cannot compile C++
|
use DWARF-2). A symptom of the problem is that you cannot compile C++
|
programs like `groff' 1.19.1 without getting messages similar to the
|
programs like `groff' 1.19.1 without getting messages similar to the
|
following:
|
following:
|
|
|
ld: warning: relocation error: R_SPARC_UA32: ...
|
ld: warning: relocation error: R_SPARC_UA32: ...
|
external symbolic relocation against non-allocatable section
|
external symbolic relocation against non-allocatable section
|
.debug_info cannot be processed at runtime: relocation ignored.
|
.debug_info cannot be processed at runtime: relocation ignored.
|
|
|
To work around this problem, compile with `-gstabs+' instead of
|
To work around this problem, compile with `-gstabs+' instead of
|
plain `-g'.
|
plain `-g'.
|
|
|
When configuring the GNU Multiple Precision Library (GMP) or the MPFR
|
When configuring the GNU Multiple Precision Library (GMP) or the MPFR
|
library on a Solaris 7 or later system, the canonical target triplet
|
library on a Solaris 7 or later system, the canonical target triplet
|
must be specified as the `build' parameter on the configure line. This
|
must be specified as the `build' parameter on the configure line. This
|
triplet can be obtained by invoking ./config.guess in the toplevel
|
triplet can be obtained by invoking ./config.guess in the toplevel
|
source directory of GCC (and not that of GMP or MPFR). For example on
|
source directory of GCC (and not that of GMP or MPFR). For example on
|
a Solaris 7 system:
|
a Solaris 7 system:
|
|
|
% ./configure --build=sparc-sun-solaris2.7 --prefix=xxx
|
% ./configure --build=sparc-sun-solaris2.7 --prefix=xxx
|
|
|
sparc-sun-solaris2.7
|
sparc-sun-solaris2.7
|
====================
|
====================
|
|
|
Sun patch 107058-01 (1999-01-13) for Solaris 7/SPARC triggers a bug in
|
Sun patch 107058-01 (1999-01-13) for Solaris 7/SPARC triggers a bug in
|
the dynamic linker. This problem (Sun bug 4210064) affects GCC 2.8 and
|
the dynamic linker. This problem (Sun bug 4210064) affects GCC 2.8 and
|
later, including all EGCS releases. Sun formerly recommended 107058-01
|
later, including all EGCS releases. Sun formerly recommended 107058-01
|
for all Solaris 7 users, but around 1999-09-01 it started to recommend
|
for all Solaris 7 users, but around 1999-09-01 it started to recommend
|
it only for people who use Sun's compilers.
|
it only for people who use Sun's compilers.
|
|
|
Here are some workarounds to this problem:
|
Here are some workarounds to this problem:
|
* Do not install Sun patch 107058-01 until after Sun releases a
|
* Do not install Sun patch 107058-01 until after Sun releases a
|
complete patch for bug 4210064. This is the simplest course to
|
complete patch for bug 4210064. This is the simplest course to
|
take, unless you must also use Sun's C compiler. Unfortunately
|
take, unless you must also use Sun's C compiler. Unfortunately
|
107058-01 is preinstalled on some new Solaris 7-based hosts, so
|
107058-01 is preinstalled on some new Solaris 7-based hosts, so
|
you may have to back it out.
|
you may have to back it out.
|
|
|
* Copy the original, unpatched Solaris 7 `/usr/ccs/bin/as' into
|
* Copy the original, unpatched Solaris 7 `/usr/ccs/bin/as' into
|
`/usr/local/libexec/gcc/sparc-sun-solaris2.7/3.4/as', adjusting
|
`/usr/local/libexec/gcc/sparc-sun-solaris2.7/3.4/as', adjusting
|
the latter name to fit your local conventions and software version
|
the latter name to fit your local conventions and software version
|
numbers.
|
numbers.
|
|
|
* Install Sun patch 106950-03 (1999-05-25) or later. Nobody with
|
* Install Sun patch 106950-03 (1999-05-25) or later. Nobody with
|
both 107058-01 and 106950-03 installed has reported the bug with
|
both 107058-01 and 106950-03 installed has reported the bug with
|
GCC and Sun's dynamic linker. This last course of action is
|
GCC and Sun's dynamic linker. This last course of action is
|
riskiest, for two reasons. First, you must install 106950 on all
|
riskiest, for two reasons. First, you must install 106950 on all
|
hosts that run code generated by GCC; it doesn't suffice to
|
hosts that run code generated by GCC; it doesn't suffice to
|
install it only on the hosts that run GCC itself. Second, Sun
|
install it only on the hosts that run GCC itself. Second, Sun
|
says that 106950-03 is only a partial fix for bug 4210064, but Sun
|
says that 106950-03 is only a partial fix for bug 4210064, but Sun
|
doesn't know whether the partial fix is adequate for GCC.
|
doesn't know whether the partial fix is adequate for GCC.
|
Revision -08 or later should fix the bug. The current (as of
|
Revision -08 or later should fix the bug. The current (as of
|
2004-05-23) revision is -24, and is included in the Solaris 7
|
2004-05-23) revision is -24, and is included in the Solaris 7
|
Recommended Patch Cluster.
|
Recommended Patch Cluster.
|
|
|
GCC 3.3 triggers a bug in version 5.0 Alpha 03/27/98 of the Sun
|
GCC 3.3 triggers a bug in version 5.0 Alpha 03/27/98 of the Sun
|
assembler, which causes a bootstrap failure when linking the 64-bit
|
assembler, which causes a bootstrap failure when linking the 64-bit
|
shared version of libgcc. A typical error message is:
|
shared version of libgcc. A typical error message is:
|
|
|
ld: fatal: relocation error: R_SPARC_32: file libgcc/sparcv9/_muldi3.o:
|
ld: fatal: relocation error: R_SPARC_32: file libgcc/sparcv9/_muldi3.o:
|
symbol : offset 0xffffffff7ec133e7 is non-aligned.
|
symbol : offset 0xffffffff7ec133e7 is non-aligned.
|
|
|
This bug has been fixed in the final 5.0 version of the assembler.
|
This bug has been fixed in the final 5.0 version of the assembler.
|
|
|
A similar problem was reported for version Sun WorkShop 6 99/08/18
|
A similar problem was reported for version Sun WorkShop 6 99/08/18
|
of the Sun assembler, which causes a bootstrap failure with GCC 4.0.0:
|
of the Sun assembler, which causes a bootstrap failure with GCC 4.0.0:
|
|
|
ld: fatal: relocation error: R_SPARC_DISP32:
|
ld: fatal: relocation error: R_SPARC_DISP32:
|
file .libs/libstdc++.lax/libsupc++convenience.a/vterminate.o:
|
file .libs/libstdc++.lax/libsupc++convenience.a/vterminate.o:
|
symbol : offset 0xfccd33ad is non-aligned
|
symbol : offset 0xfccd33ad is non-aligned
|
|
|
This bug has been fixed in more recent revisions of the assembler.
|
This bug has been fixed in more recent revisions of the assembler.
|
|
|
sparc-*-linux*
|
sparc-*-linux*
|
==============
|
==============
|
|
|
GCC versions 3.0 and higher require binutils 2.11.2 and glibc 2.2.4 or
|
GCC versions 3.0 and higher require binutils 2.11.2 and glibc 2.2.4 or
|
newer on this platform. All earlier binutils and glibc releases
|
newer on this platform. All earlier binutils and glibc releases
|
mishandled unaligned relocations on `sparc-*-*' targets.
|
mishandled unaligned relocations on `sparc-*-*' targets.
|
|
|
sparc64-*-solaris2*
|
sparc64-*-solaris2*
|
===================
|
===================
|
|
|
When configuring the GNU Multiple Precision Library (GMP) or the MPFR
|
When configuring the GNU Multiple Precision Library (GMP) or the MPFR
|
library, the canonical target triplet must be specified as the `build'
|
library, the canonical target triplet must be specified as the `build'
|
parameter on the configure line. For example on a Solaris 7 system:
|
parameter on the configure line. For example on a Solaris 7 system:
|
|
|
% ./configure --build=sparc64-sun-solaris2.7 --prefix=xxx
|
% ./configure --build=sparc64-sun-solaris2.7 --prefix=xxx
|
|
|
The following compiler flags must be specified in the configure step
|
The following compiler flags must be specified in the configure step
|
in order to bootstrap this target with the Sun compiler:
|
in order to bootstrap this target with the Sun compiler:
|
|
|
% CC="cc -xarch=v9 -xildoff" SRCDIR/configure [OPTIONS] [TARGET]
|
% CC="cc -xarch=v9 -xildoff" SRCDIR/configure [OPTIONS] [TARGET]
|
|
|
`-xarch=v9' specifies the SPARC-V9 architecture to the Sun toolchain
|
`-xarch=v9' specifies the SPARC-V9 architecture to the Sun toolchain
|
and `-xildoff' turns off the incremental linker.
|
and `-xildoff' turns off the incremental linker.
|
|
|
sparcv9-*-solaris2*
|
sparcv9-*-solaris2*
|
===================
|
===================
|
|
|
This is a synonym for sparc64-*-solaris2*.
|
This is a synonym for sparc64-*-solaris2*.
|
|
|
*-*-sysv*
|
*-*-sysv*
|
=========
|
=========
|
|
|
On System V release 3, you may get this error message while linking:
|
On System V release 3, you may get this error message while linking:
|
|
|
ld fatal: failed to write symbol name SOMETHING
|
ld fatal: failed to write symbol name SOMETHING
|
in strings table for file WHATEVER
|
in strings table for file WHATEVER
|
|
|
This probably indicates that the disk is full or your ulimit won't
|
This probably indicates that the disk is full or your ulimit won't
|
allow the file to be as large as it needs to be.
|
allow the file to be as large as it needs to be.
|
|
|
This problem can also result because the kernel parameter `MAXUMEM'
|
This problem can also result because the kernel parameter `MAXUMEM'
|
is too small. If so, you must regenerate the kernel and make the value
|
is too small. If so, you must regenerate the kernel and make the value
|
much larger. The default value is reported to be 1024; a value of 32768
|
much larger. The default value is reported to be 1024; a value of 32768
|
is said to work. Smaller values may also work.
|
is said to work. Smaller values may also work.
|
|
|
On System V, if you get an error like this,
|
On System V, if you get an error like this,
|
|
|
/usr/local/lib/bison.simple: In function `yyparse':
|
/usr/local/lib/bison.simple: In function `yyparse':
|
/usr/local/lib/bison.simple:625: virtual memory exhausted
|
/usr/local/lib/bison.simple:625: virtual memory exhausted
|
|
|
that too indicates a problem with disk space, ulimit, or `MAXUMEM'.
|
that too indicates a problem with disk space, ulimit, or `MAXUMEM'.
|
|
|
On a System V release 4 system, make sure `/usr/bin' precedes
|
On a System V release 4 system, make sure `/usr/bin' precedes
|
`/usr/ucb' in `PATH'. The `cc' command in `/usr/ucb' uses libraries
|
`/usr/ucb' in `PATH'. The `cc' command in `/usr/ucb' uses libraries
|
which have bugs.
|
which have bugs.
|
|
|
vax-dec-ultrix
|
vax-dec-ultrix
|
==============
|
==============
|
|
|
Don't try compiling with VAX C (`vcc'). It produces incorrect code in
|
Don't try compiling with VAX C (`vcc'). It produces incorrect code in
|
some cases (for example, when `alloca' is used).
|
some cases (for example, when `alloca' is used).
|
|
|
*-*-vxworks*
|
*-*-vxworks*
|
============
|
============
|
|
|
Support for VxWorks is in flux. At present GCC supports _only_ the
|
Support for VxWorks is in flux. At present GCC supports _only_ the
|
very recent VxWorks 5.5 (aka Tornado 2.2) release, and only on PowerPC.
|
very recent VxWorks 5.5 (aka Tornado 2.2) release, and only on PowerPC.
|
We welcome patches for other architectures supported by VxWorks 5.5.
|
We welcome patches for other architectures supported by VxWorks 5.5.
|
Support for VxWorks AE would also be welcome; we believe this is merely
|
Support for VxWorks AE would also be welcome; we believe this is merely
|
a matter of writing an appropriate "configlette" (see below). We are
|
a matter of writing an appropriate "configlette" (see below). We are
|
not interested in supporting older, a.out or COFF-based, versions of
|
not interested in supporting older, a.out or COFF-based, versions of
|
VxWorks in GCC 3.
|
VxWorks in GCC 3.
|
|
|
VxWorks comes with an older version of GCC installed in
|
VxWorks comes with an older version of GCC installed in
|
`$WIND_BASE/host'; we recommend you do not overwrite it. Choose an
|
`$WIND_BASE/host'; we recommend you do not overwrite it. Choose an
|
installation PREFIX entirely outside $WIND_BASE. Before running
|
installation PREFIX entirely outside $WIND_BASE. Before running
|
`configure', create the directories `PREFIX' and `PREFIX/bin'. Link or
|
`configure', create the directories `PREFIX' and `PREFIX/bin'. Link or
|
copy the appropriate assembler, linker, etc. into `PREFIX/bin', and set
|
copy the appropriate assembler, linker, etc. into `PREFIX/bin', and set
|
your PATH to include that directory while running both `configure' and
|
your PATH to include that directory while running both `configure' and
|
`make'.
|
`make'.
|
|
|
You must give `configure' the `--with-headers=$WIND_BASE/target/h'
|
You must give `configure' the `--with-headers=$WIND_BASE/target/h'
|
switch so that it can find the VxWorks system headers. Since VxWorks
|
switch so that it can find the VxWorks system headers. Since VxWorks
|
is a cross compilation target only, you must also specify
|
is a cross compilation target only, you must also specify
|
`--target=TARGET'. `configure' will attempt to create the directory
|
`--target=TARGET'. `configure' will attempt to create the directory
|
`PREFIX/TARGET/sys-include' and copy files into it; make sure the user
|
`PREFIX/TARGET/sys-include' and copy files into it; make sure the user
|
running `configure' has sufficient privilege to do so.
|
running `configure' has sufficient privilege to do so.
|
|
|
GCC's exception handling runtime requires a special "configlette"
|
GCC's exception handling runtime requires a special "configlette"
|
module, `contrib/gthr_supp_vxw_5x.c'. Follow the instructions in that
|
module, `contrib/gthr_supp_vxw_5x.c'. Follow the instructions in that
|
file to add the module to your kernel build. (Future versions of
|
file to add the module to your kernel build. (Future versions of
|
VxWorks will incorporate this module.)
|
VxWorks will incorporate this module.)
|
|
|
x86_64-*-*, amd64-*-*
|
x86_64-*-*, amd64-*-*
|
=====================
|
=====================
|
|
|
GCC supports the x86-64 architecture implemented by the AMD64 processor
|
GCC supports the x86-64 architecture implemented by the AMD64 processor
|
(amd64-*-* is an alias for x86_64-*-*) on GNU/Linux, FreeBSD and NetBSD.
|
(amd64-*-* is an alias for x86_64-*-*) on GNU/Linux, FreeBSD and NetBSD.
|
On GNU/Linux the default is a bi-arch compiler which is able to generate
|
On GNU/Linux the default is a bi-arch compiler which is able to generate
|
both 64-bit x86-64 and 32-bit x86 code (via the `-m32' switch).
|
both 64-bit x86-64 and 32-bit x86 code (via the `-m32' switch).
|
|
|
xtensa-*-elf
|
xtensa-*-elf
|
============
|
============
|
|
|
This target is intended for embedded Xtensa systems using the `newlib'
|
This target is intended for embedded Xtensa systems using the `newlib'
|
C library. It uses ELF but does not support shared objects.
|
C library. It uses ELF but does not support shared objects.
|
Designed-defined instructions specified via the Tensilica Instruction
|
Designed-defined instructions specified via the Tensilica Instruction
|
Extension (TIE) language are only supported through inline assembly.
|
Extension (TIE) language are only supported through inline assembly.
|
|
|
The Xtensa configuration information must be specified prior to
|
The Xtensa configuration information must be specified prior to
|
building GCC. The `include/xtensa-config.h' header file contains the
|
building GCC. The `include/xtensa-config.h' header file contains the
|
configuration information. If you created your own Xtensa
|
configuration information. If you created your own Xtensa
|
configuration with the Xtensa Processor Generator, the downloaded files
|
configuration with the Xtensa Processor Generator, the downloaded files
|
include a customized copy of this header file, which you can use to
|
include a customized copy of this header file, which you can use to
|
replace the default header file.
|
replace the default header file.
|
|
|
xtensa-*-linux*
|
xtensa-*-linux*
|
===============
|
===============
|
|
|
This target is for Xtensa systems running GNU/Linux. It supports ELF
|
This target is for Xtensa systems running GNU/Linux. It supports ELF
|
shared objects and the GNU C library (glibc). It also generates
|
shared objects and the GNU C library (glibc). It also generates
|
position-independent code (PIC) regardless of whether the `-fpic' or
|
position-independent code (PIC) regardless of whether the `-fpic' or
|
`-fPIC' options are used. In other respects, this target is the same
|
`-fPIC' options are used. In other respects, this target is the same
|
as the `xtensa-*-elf' target.
|
as the `xtensa-*-elf' target.
|
|
|
Microsoft Windows (32-bit)
|
Microsoft Windows (32-bit)
|
==========================
|
==========================
|
|
|
Ports of GCC are included with the Cygwin environment.
|
Ports of GCC are included with the Cygwin environment.
|
|
|
GCC will build under Cygwin without modification; it does not build
|
GCC will build under Cygwin without modification; it does not build
|
with Microsoft's C++ compiler and there are no plans to make it do so.
|
with Microsoft's C++ compiler and there are no plans to make it do so.
|
|
|
OS/2
|
OS/2
|
====
|
====
|
|
|
GCC does not currently support OS/2. However, Andrew Zabolotny has been
|
GCC does not currently support OS/2. However, Andrew Zabolotny has been
|
working on a generic OS/2 port with pgcc. The current code can be found
|
working on a generic OS/2 port with pgcc. The current code can be found
|
at http://www.goof.com/pcg/os2/.
|
at http://www.goof.com/pcg/os2/.
|
|
|
Older systems
|
Older systems
|
=============
|
=============
|
|
|
GCC contains support files for many older (1980s and early 1990s) Unix
|
GCC contains support files for many older (1980s and early 1990s) Unix
|
variants. For the most part, support for these systems has not been
|
variants. For the most part, support for these systems has not been
|
deliberately removed, but it has not been maintained for several years
|
deliberately removed, but it has not been maintained for several years
|
and may suffer from bitrot.
|
and may suffer from bitrot.
|
|
|
Starting with GCC 3.1, each release has a list of "obsoleted"
|
Starting with GCC 3.1, each release has a list of "obsoleted"
|
systems. Support for these systems is still present in that release,
|
systems. Support for these systems is still present in that release,
|
but `configure' will fail unless the `--enable-obsolete' option is
|
but `configure' will fail unless the `--enable-obsolete' option is
|
given. Unless a maintainer steps forward, support for these systems
|
given. Unless a maintainer steps forward, support for these systems
|
will be removed from the next release of GCC.
|
will be removed from the next release of GCC.
|
|
|
Support for old systems as hosts for GCC can cause problems if the
|
Support for old systems as hosts for GCC can cause problems if the
|
workarounds for compiler, library and operating system bugs affect the
|
workarounds for compiler, library and operating system bugs affect the
|
cleanliness or maintainability of the rest of GCC. In some cases, to
|
cleanliness or maintainability of the rest of GCC. In some cases, to
|
bring GCC up on such a system, if still possible with current GCC, may
|
bring GCC up on such a system, if still possible with current GCC, may
|
require first installing an old version of GCC which did work on that
|
require first installing an old version of GCC which did work on that
|
system, and using it to compile a more recent GCC, to avoid bugs in the
|
system, and using it to compile a more recent GCC, to avoid bugs in the
|
vendor compiler. Old releases of GCC 1 and GCC 2 are available in the
|
vendor compiler. Old releases of GCC 1 and GCC 2 are available in the
|
`old-releases' directory on the GCC mirror sites. Header bugs may
|
`old-releases' directory on the GCC mirror sites. Header bugs may
|
generally be avoided using `fixincludes', but bugs or deficiencies in
|
generally be avoided using `fixincludes', but bugs or deficiencies in
|
libraries and the operating system may still cause problems.
|
libraries and the operating system may still cause problems.
|
|
|
Support for older systems as targets for cross-compilation is less
|
Support for older systems as targets for cross-compilation is less
|
problematic than support for them as hosts for GCC; if an enthusiast
|
problematic than support for them as hosts for GCC; if an enthusiast
|
wishes to make such a target work again (including resurrecting any of
|
wishes to make such a target work again (including resurrecting any of
|
the targets that never worked with GCC 2, starting from the last
|
the targets that never worked with GCC 2, starting from the last
|
version before they were removed), patches following the usual
|
version before they were removed), patches following the usual
|
requirements would be likely to be accepted, since they should not
|
requirements would be likely to be accepted, since they should not
|
affect the support for more modern targets.
|
affect the support for more modern targets.
|
|
|
For some systems, old versions of GNU binutils may also be useful,
|
For some systems, old versions of GNU binutils may also be useful,
|
and are available from `pub/binutils/old-releases' on sourceware.org
|
and are available from `pub/binutils/old-releases' on sourceware.org
|
mirror sites.
|
mirror sites.
|
|
|
Some of the information on specific systems above relates to such
|
Some of the information on specific systems above relates to such
|
older systems, but much of the information about GCC on such systems
|
older systems, but much of the information about GCC on such systems
|
(which may no longer be applicable to current GCC) is to be found in
|
(which may no longer be applicable to current GCC) is to be found in
|
the GCC texinfo manual.
|
the GCC texinfo manual.
|
|
|
all ELF targets (SVR4, Solaris 2, etc.)
|
all ELF targets (SVR4, Solaris 2, etc.)
|
=======================================
|
=======================================
|
|
|
C++ support is significantly better on ELF targets if you use the GNU
|
C++ support is significantly better on ELF targets if you use the GNU
|
linker; duplicate copies of inlines, vtables and template
|
linker; duplicate copies of inlines, vtables and template
|
instantiations will be discarded automatically.
|
instantiations will be discarded automatically.
|
|
|
|
|
File: gccinstall.info, Node: Old, Next: GNU Free Documentation License, Prev: Specific, Up: Top
|
File: gccinstall.info, Node: Old, Next: GNU Free Documentation License, Prev: Specific, Up: Top
|
|
|
10 Old installation documentation
|
10 Old installation documentation
|
*********************************
|
*********************************
|
|
|
Note most of this information is out of date and superseded by the
|
Note most of this information is out of date and superseded by the
|
previous chapters of this manual. It is provided for historical
|
previous chapters of this manual. It is provided for historical
|
reference only, because of a lack of volunteers to merge it into the
|
reference only, because of a lack of volunteers to merge it into the
|
main manual.
|
main manual.
|
|
|
* Menu:
|
* Menu:
|
|
|
* Configurations:: Configurations Supported by GCC.
|
* Configurations:: Configurations Supported by GCC.
|
|
|
Here is the procedure for installing GCC on a GNU or Unix system.
|
Here is the procedure for installing GCC on a GNU or Unix system.
|
|
|
1. If you have chosen a configuration for GCC which requires other GNU
|
1. If you have chosen a configuration for GCC which requires other GNU
|
tools (such as GAS or the GNU linker) instead of the standard
|
tools (such as GAS or the GNU linker) instead of the standard
|
system tools, install the required tools in the build directory
|
system tools, install the required tools in the build directory
|
under the names `as', `ld' or whatever is appropriate.
|
under the names `as', `ld' or whatever is appropriate.
|
|
|
Alternatively, you can do subsequent compilation using a value of
|
Alternatively, you can do subsequent compilation using a value of
|
the `PATH' environment variable such that the necessary GNU tools
|
the `PATH' environment variable such that the necessary GNU tools
|
come before the standard system tools.
|
come before the standard system tools.
|
|
|
2. Specify the host, build and target machine configurations. You do
|
2. Specify the host, build and target machine configurations. You do
|
this when you run the `configure' script.
|
this when you run the `configure' script.
|
|
|
The "build" machine is the system which you are using, the "host"
|
The "build" machine is the system which you are using, the "host"
|
machine is the system where you want to run the resulting compiler
|
machine is the system where you want to run the resulting compiler
|
(normally the build machine), and the "target" machine is the
|
(normally the build machine), and the "target" machine is the
|
system for which you want the compiler to generate code.
|
system for which you want the compiler to generate code.
|
|
|
If you are building a compiler to produce code for the machine it
|
If you are building a compiler to produce code for the machine it
|
runs on (a native compiler), you normally do not need to specify
|
runs on (a native compiler), you normally do not need to specify
|
any operands to `configure'; it will try to guess the type of
|
any operands to `configure'; it will try to guess the type of
|
machine you are on and use that as the build, host and target
|
machine you are on and use that as the build, host and target
|
machines. So you don't need to specify a configuration when
|
machines. So you don't need to specify a configuration when
|
building a native compiler unless `configure' cannot figure out
|
building a native compiler unless `configure' cannot figure out
|
what your configuration is or guesses wrong.
|
what your configuration is or guesses wrong.
|
|
|
In those cases, specify the build machine's "configuration name"
|
In those cases, specify the build machine's "configuration name"
|
with the `--host' option; the host and target will default to be
|
with the `--host' option; the host and target will default to be
|
the same as the host machine.
|
the same as the host machine.
|
|
|
Here is an example:
|
Here is an example:
|
|
|
./configure --host=sparc-sun-sunos4.1
|
./configure --host=sparc-sun-sunos4.1
|
|
|
A configuration name may be canonical or it may be more or less
|
A configuration name may be canonical or it may be more or less
|
abbreviated.
|
abbreviated.
|
|
|
A canonical configuration name has three parts, separated by
|
A canonical configuration name has three parts, separated by
|
dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three
|
dashes. It looks like this: `CPU-COMPANY-SYSTEM'. (The three
|
parts may themselves contain dashes; `configure' can figure out
|
parts may themselves contain dashes; `configure' can figure out
|
which dashes serve which purpose.) For example,
|
which dashes serve which purpose.) For example,
|
`m68k-sun-sunos4.1' specifies a Sun 3.
|
`m68k-sun-sunos4.1' specifies a Sun 3.
|
|
|
You can also replace parts of the configuration by nicknames or
|
You can also replace parts of the configuration by nicknames or
|
aliases. For example, `sun3' stands for `m68k-sun', so
|
aliases. For example, `sun3' stands for `m68k-sun', so
|
`sun3-sunos4.1' is another way to specify a Sun 3.
|
`sun3-sunos4.1' is another way to specify a Sun 3.
|
|
|
You can specify a version number after any of the system types,
|
You can specify a version number after any of the system types,
|
and some of the CPU types. In most cases, the version is
|
and some of the CPU types. In most cases, the version is
|
irrelevant, and will be ignored. So you might as well specify the
|
irrelevant, and will be ignored. So you might as well specify the
|
version if you know it.
|
version if you know it.
|
|
|
See *Note Configurations::, for a list of supported configuration
|
See *Note Configurations::, for a list of supported configuration
|
names and notes on many of the configurations. You should check
|
names and notes on many of the configurations. You should check
|
the notes in that section before proceeding any further with the
|
the notes in that section before proceeding any further with the
|
installation of GCC.
|
installation of GCC.
|
|
|
|
|
|
|
File: gccinstall.info, Node: Configurations, Up: Old
|
File: gccinstall.info, Node: Configurations, Up: Old
|
|
|
10.1 Configurations Supported by GCC
|
10.1 Configurations Supported by GCC
|
====================================
|
====================================
|
|
|
Here are the possible CPU types:
|
Here are the possible CPU types:
|
|
|
1750a, a29k, alpha, arm, avr, cN, clipper, dsp16xx, elxsi, fr30,
|
1750a, a29k, alpha, arm, avr, cN, clipper, dsp16xx, elxsi, fr30,
|
h8300, hppa1.0, hppa1.1, i370, i386, i486, i586, i686, i786, i860,
|
h8300, hppa1.0, hppa1.1, i370, i386, i486, i586, i686, i786, i860,
|
i960, ip2k, m32r, m68000, m68k, m6811, m6812, m88k, mcore, mips,
|
i960, ip2k, m32r, m68000, m68k, m6811, m6812, m88k, mcore, mips,
|
mipsel, mips64, mips64el, mn10200, mn10300, ns32k, pdp11, powerpc,
|
mipsel, mips64, mips64el, mn10200, mn10300, ns32k, pdp11, powerpc,
|
powerpcle, romp, rs6000, sh, sparc, sparclite, sparc64, v850, vax,
|
powerpcle, romp, rs6000, sh, sparc, sparclite, sparc64, v850, vax,
|
we32k.
|
we32k.
|
|
|
Here are the recognized company names. As you can see, customary
|
Here are the recognized company names. As you can see, customary
|
abbreviations are used rather than the longer official names.
|
abbreviations are used rather than the longer official names.
|
|
|
acorn, alliant, altos, apollo, apple, att, bull, cbm, convergent,
|
acorn, alliant, altos, apollo, apple, att, bull, cbm, convergent,
|
convex, crds, dec, dg, dolphin, elxsi, encore, harris, hitachi,
|
convex, crds, dec, dg, dolphin, elxsi, encore, harris, hitachi,
|
hp, ibm, intergraph, isi, mips, motorola, ncr, next, ns, omron,
|
hp, ibm, intergraph, isi, mips, motorola, ncr, next, ns, omron,
|
plexus, sequent, sgi, sony, sun, tti, unicom, wrs.
|
plexus, sequent, sgi, sony, sun, tti, unicom, wrs.
|
|
|
The company name is meaningful only to disambiguate when the rest of
|
The company name is meaningful only to disambiguate when the rest of
|
the information supplied is insufficient. You can omit it, writing
|
the information supplied is insufficient. You can omit it, writing
|
just `CPU-SYSTEM', if it is not needed. For example, `vax-ultrix4.2'
|
just `CPU-SYSTEM', if it is not needed. For example, `vax-ultrix4.2'
|
is equivalent to `vax-dec-ultrix4.2'.
|
is equivalent to `vax-dec-ultrix4.2'.
|
|
|
Here is a list of system types:
|
Here is a list of system types:
|
|
|
386bsd, aix, acis, amigaos, aos, aout, aux, bosx, bsd, clix, coff,
|
386bsd, aix, acis, amigaos, aos, aout, aux, bosx, bsd, clix, coff,
|
ctix, cxux, dgux, dynix, ebmon, ecoff, elf, esix, freebsd, hms,
|
ctix, cxux, dgux, dynix, ebmon, ecoff, elf, esix, freebsd, hms,
|
genix, gnu, linux, linux-gnu, hiux, hpux, iris, irix, isc, luna,
|
genix, gnu, linux, linux-gnu, hiux, hpux, iris, irix, isc, luna,
|
lynxos, mach, minix, msdos, mvs, netbsd, newsos, nindy, ns, osf,
|
lynxos, mach, minix, msdos, mvs, netbsd, newsos, nindy, ns, osf,
|
osfrose, ptx, riscix, riscos, rtu, sco, sim, solaris, sunos, sym,
|
osfrose, ptx, riscix, riscos, rtu, sco, sim, solaris, sunos, sym,
|
sysv, udi, ultrix, unicos, uniplus, unos, vms, vsta, vxworks,
|
sysv, udi, ultrix, unicos, uniplus, unos, vms, vsta, vxworks,
|
winnt, xenix.
|
winnt, xenix.
|
|
|
You can omit the system type; then `configure' guesses the operating
|
You can omit the system type; then `configure' guesses the operating
|
system from the CPU and company.
|
system from the CPU and company.
|
|
|
You can add a version number to the system type; this may or may not
|
You can add a version number to the system type; this may or may not
|
make a difference. For example, you can write `bsd4.3' or `bsd4.4' to
|
make a difference. For example, you can write `bsd4.3' or `bsd4.4' to
|
distinguish versions of BSD. In practice, the version number is most
|
distinguish versions of BSD. In practice, the version number is most
|
needed for `sysv3' and `sysv4', which are often treated differently.
|
needed for `sysv3' and `sysv4', which are often treated differently.
|
|
|
`linux-gnu' is the canonical name for the GNU/Linux target; however
|
`linux-gnu' is the canonical name for the GNU/Linux target; however
|
GCC will also accept `linux'. The version of the kernel in use is not
|
GCC will also accept `linux'. The version of the kernel in use is not
|
relevant on these systems. A suffix such as `libc1' or `aout'
|
relevant on these systems. A suffix such as `libc1' or `aout'
|
distinguishes major versions of the C library; all of the suffixed
|
distinguishes major versions of the C library; all of the suffixed
|
versions are obsolete.
|
versions are obsolete.
|
|
|
If you specify an impossible combination such as `i860-dg-vms', then
|
If you specify an impossible combination such as `i860-dg-vms', then
|
you may get an error message from `configure', or it may ignore part of
|
you may get an error message from `configure', or it may ignore part of
|
the information and do the best it can with the rest. `configure'
|
the information and do the best it can with the rest. `configure'
|
always prints the canonical name for the alternative that it used. GCC
|
always prints the canonical name for the alternative that it used. GCC
|
does not support all possible alternatives.
|
does not support all possible alternatives.
|
|
|
Often a particular model of machine has a name. Many machine names
|
Often a particular model of machine has a name. Many machine names
|
are recognized as aliases for CPU/company combinations. Thus, the
|
are recognized as aliases for CPU/company combinations. Thus, the
|
machine name `sun3', mentioned above, is an alias for `m68k-sun'.
|
machine name `sun3', mentioned above, is an alias for `m68k-sun'.
|
Sometimes we accept a company name as a machine name, when the name is
|
Sometimes we accept a company name as a machine name, when the name is
|
popularly used for a particular machine. Here is a table of the known
|
popularly used for a particular machine. Here is a table of the known
|
machine names:
|
machine names:
|
|
|
3300, 3b1, 3bN, 7300, altos3068, altos, apollo68, att-7300,
|
3300, 3b1, 3bN, 7300, altos3068, altos, apollo68, att-7300,
|
balance, convex-cN, crds, decstation-3100, decstation, delta,
|
balance, convex-cN, crds, decstation-3100, decstation, delta,
|
encore, fx2800, gmicro, hp7NN, hp8NN, hp9k2NN, hp9k3NN, hp9k7NN,
|
encore, fx2800, gmicro, hp7NN, hp8NN, hp9k2NN, hp9k3NN, hp9k7NN,
|
hp9k8NN, iris4d, iris, isi68, m3230, magnum, merlin, miniframe,
|
hp9k8NN, iris4d, iris, isi68, m3230, magnum, merlin, miniframe,
|
mmax, news-3600, news800, news, next, pbd, pc532, pmax, powerpc,
|
mmax, news-3600, news800, news, next, pbd, pc532, pmax, powerpc,
|
powerpcle, ps2, risc-news, rtpc, sun2, sun386i, sun386, sun3,
|
powerpcle, ps2, risc-news, rtpc, sun2, sun386i, sun386, sun3,
|
sun4, symmetry, tower-32, tower.
|
sun4, symmetry, tower-32, tower.
|
|
|
Remember that a machine name specifies both the cpu type and the company
|
Remember that a machine name specifies both the cpu type and the company
|
name. If you want to install your own homemade configuration files,
|
name. If you want to install your own homemade configuration files,
|
you can use `local' as the company name to access them. If you use
|
you can use `local' as the company name to access them. If you use
|
configuration `CPU-local', the configuration name without the cpu prefix
|
configuration `CPU-local', the configuration name without the cpu prefix
|
is used to form the configuration file names.
|
is used to form the configuration file names.
|
|
|
Thus, if you specify `m68k-local', configuration uses files
|
Thus, if you specify `m68k-local', configuration uses files
|
`m68k.md', `local.h', `m68k.c', `xm-local.h', `t-local', and `x-local',
|
`m68k.md', `local.h', `m68k.c', `xm-local.h', `t-local', and `x-local',
|
all in the directory `config/m68k'.
|
all in the directory `config/m68k'.
|
|
|
|
|
File: gccinstall.info, Node: GNU Free Documentation License, Next: Concept Index, Prev: Old, Up: Top
|
File: gccinstall.info, Node: GNU Free Documentation License, Next: Concept Index, Prev: Old, Up: Top
|
|
|
GNU Free Documentation License
|
GNU Free Documentation License
|
******************************
|
******************************
|
|
|
Version 1.2, November 2002
|
Version 1.2, November 2002
|
|
|
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
|
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
|
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
|
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
|
|
|
Everyone is permitted to copy and distribute verbatim copies
|
Everyone is permitted to copy and distribute verbatim copies
|
of this license document, but changing it is not allowed.
|
of this license document, but changing it is not allowed.
|
|
|
0. PREAMBLE
|
0. PREAMBLE
|
|
|
The purpose of this License is to make a manual, textbook, or other
|
The purpose of this License is to make a manual, textbook, or other
|
functional and useful document "free" in the sense of freedom: to
|
functional and useful document "free" in the sense of freedom: to
|
assure everyone the effective freedom to copy and redistribute it,
|
assure everyone the effective freedom to copy and redistribute it,
|
with or without modifying it, either commercially or
|
with or without modifying it, either commercially or
|
noncommercially. Secondarily, this License preserves for the
|
noncommercially. Secondarily, this License preserves for the
|
author and publisher a way to get credit for their work, while not
|
author and publisher a way to get credit for their work, while not
|
being considered responsible for modifications made by others.
|
being considered responsible for modifications made by others.
|
|
|
This License is a kind of "copyleft", which means that derivative
|
This License is a kind of "copyleft", which means that derivative
|
works of the document must themselves be free in the same sense.
|
works of the document must themselves be free in the same sense.
|
It complements the GNU General Public License, which is a copyleft
|
It complements the GNU General Public License, which is a copyleft
|
license designed for free software.
|
license designed for free software.
|
|
|
We have designed this License in order to use it for manuals for
|
We have designed this License in order to use it for manuals for
|
free software, because free software needs free documentation: a
|
free software, because free software needs free documentation: a
|
free program should come with manuals providing the same freedoms
|
free program should come with manuals providing the same freedoms
|
that the software does. But this License is not limited to
|
that the software does. But this License is not limited to
|
software manuals; it can be used for any textual work, regardless
|
software manuals; it can be used for any textual work, regardless
|
of subject matter or whether it is published as a printed book.
|
of subject matter or whether it is published as a printed book.
|
We recommend this License principally for works whose purpose is
|
We recommend this License principally for works whose purpose is
|
instruction or reference.
|
instruction or reference.
|
|
|
1. APPLICABILITY AND DEFINITIONS
|
1. APPLICABILITY AND DEFINITIONS
|
|
|
This License applies to any manual or other work, in any medium,
|
This License applies to any manual or other work, in any medium,
|
that contains a notice placed by the copyright holder saying it
|
that contains a notice placed by the copyright holder saying it
|
can be distributed under the terms of this License. Such a notice
|
can be distributed under the terms of this License. Such a notice
|
grants a world-wide, royalty-free license, unlimited in duration,
|
grants a world-wide, royalty-free license, unlimited in duration,
|
to use that work under the conditions stated herein. The
|
to use that work under the conditions stated herein. The
|
"Document", below, refers to any such manual or work. Any member
|
"Document", below, refers to any such manual or work. Any member
|
of the public is a licensee, and is addressed as "you". You
|
of the public is a licensee, and is addressed as "you". You
|
accept the license if you copy, modify or distribute the work in a
|
accept the license if you copy, modify or distribute the work in a
|
way requiring permission under copyright law.
|
way requiring permission under copyright law.
|
|
|
A "Modified Version" of the Document means any work containing the
|
A "Modified Version" of the Document means any work containing the
|
Document or a portion of it, either copied verbatim, or with
|
Document or a portion of it, either copied verbatim, or with
|
modifications and/or translated into another language.
|
modifications and/or translated into another language.
|
|
|
A "Secondary Section" is a named appendix or a front-matter section
|
A "Secondary Section" is a named appendix or a front-matter section
|
of the Document that deals exclusively with the relationship of the
|
of the Document that deals exclusively with the relationship of the
|
publishers or authors of the Document to the Document's overall
|
publishers or authors of the Document to the Document's overall
|
subject (or to related matters) and contains nothing that could
|
subject (or to related matters) and contains nothing that could
|
fall directly within that overall subject. (Thus, if the Document
|
fall directly within that overall subject. (Thus, if the Document
|
is in part a textbook of mathematics, a Secondary Section may not
|
is in part a textbook of mathematics, a Secondary Section may not
|
explain any mathematics.) The relationship could be a matter of
|
explain any mathematics.) The relationship could be a matter of
|
historical connection with the subject or with related matters, or
|
historical connection with the subject or with related matters, or
|
of legal, commercial, philosophical, ethical or political position
|
of legal, commercial, philosophical, ethical or political position
|
regarding them.
|
regarding them.
|
|
|
The "Invariant Sections" are certain Secondary Sections whose
|
The "Invariant Sections" are certain Secondary Sections whose
|
titles are designated, as being those of Invariant Sections, in
|
titles are designated, as being those of Invariant Sections, in
|
the notice that says that the Document is released under this
|
the notice that says that the Document is released under this
|
License. If a section does not fit the above definition of
|
License. If a section does not fit the above definition of
|
Secondary then it is not allowed to be designated as Invariant.
|
Secondary then it is not allowed to be designated as Invariant.
|
The Document may contain zero Invariant Sections. If the Document
|
The Document may contain zero Invariant Sections. If the Document
|
does not identify any Invariant Sections then there are none.
|
does not identify any Invariant Sections then there are none.
|
|
|
The "Cover Texts" are certain short passages of text that are
|
The "Cover Texts" are certain short passages of text that are
|
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
|
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
|
that says that the Document is released under this License. A
|
that says that the Document is released under this License. A
|
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
|
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
|
be at most 25 words.
|
be at most 25 words.
|
|
|
A "Transparent" copy of the Document means a machine-readable copy,
|
A "Transparent" copy of the Document means a machine-readable copy,
|
represented in a format whose specification is available to the
|
represented in a format whose specification is available to the
|
general public, that is suitable for revising the document
|
general public, that is suitable for revising the document
|
straightforwardly with generic text editors or (for images
|
straightforwardly with generic text editors or (for images
|
composed of pixels) generic paint programs or (for drawings) some
|
composed of pixels) generic paint programs or (for drawings) some
|
widely available drawing editor, and that is suitable for input to
|
widely available drawing editor, and that is suitable for input to
|
text formatters or for automatic translation to a variety of
|
text formatters or for automatic translation to a variety of
|
formats suitable for input to text formatters. A copy made in an
|
formats suitable for input to text formatters. A copy made in an
|
otherwise Transparent file format whose markup, or absence of
|
otherwise Transparent file format whose markup, or absence of
|
markup, has been arranged to thwart or discourage subsequent
|
markup, has been arranged to thwart or discourage subsequent
|
modification by readers is not Transparent. An image format is
|
modification by readers is not Transparent. An image format is
|
not Transparent if used for any substantial amount of text. A
|
not Transparent if used for any substantial amount of text. A
|
copy that is not "Transparent" is called "Opaque".
|
copy that is not "Transparent" is called "Opaque".
|
|
|
Examples of suitable formats for Transparent copies include plain
|
Examples of suitable formats for Transparent copies include plain
|
ASCII without markup, Texinfo input format, LaTeX input format,
|
ASCII without markup, Texinfo input format, LaTeX input format,
|
SGML or XML using a publicly available DTD, and
|
SGML or XML using a publicly available DTD, and
|
standard-conforming simple HTML, PostScript or PDF designed for
|
standard-conforming simple HTML, PostScript or PDF designed for
|
human modification. Examples of transparent image formats include
|
human modification. Examples of transparent image formats include
|
PNG, XCF and JPG. Opaque formats include proprietary formats that
|
PNG, XCF and JPG. Opaque formats include proprietary formats that
|
can be read and edited only by proprietary word processors, SGML or
|
can be read and edited only by proprietary word processors, SGML or
|
XML for which the DTD and/or processing tools are not generally
|
XML for which the DTD and/or processing tools are not generally
|
available, and the machine-generated HTML, PostScript or PDF
|
available, and the machine-generated HTML, PostScript or PDF
|
produced by some word processors for output purposes only.
|
produced by some word processors for output purposes only.
|
|
|
The "Title Page" means, for a printed book, the title page itself,
|
The "Title Page" means, for a printed book, the title page itself,
|
plus such following pages as are needed to hold, legibly, the
|
plus such following pages as are needed to hold, legibly, the
|
material this License requires to appear in the title page. For
|
material this License requires to appear in the title page. For
|
works in formats which do not have any title page as such, "Title
|
works in formats which do not have any title page as such, "Title
|
Page" means the text near the most prominent appearance of the
|
Page" means the text near the most prominent appearance of the
|
work's title, preceding the beginning of the body of the text.
|
work's title, preceding the beginning of the body of the text.
|
|
|
A section "Entitled XYZ" means a named subunit of the Document
|
A section "Entitled XYZ" means a named subunit of the Document
|
whose title either is precisely XYZ or contains XYZ in parentheses
|
whose title either is precisely XYZ or contains XYZ in parentheses
|
following text that translates XYZ in another language. (Here XYZ
|
following text that translates XYZ in another language. (Here XYZ
|
stands for a specific section name mentioned below, such as
|
stands for a specific section name mentioned below, such as
|
"Acknowledgements", "Dedications", "Endorsements", or "History".)
|
"Acknowledgements", "Dedications", "Endorsements", or "History".)
|
To "Preserve the Title" of such a section when you modify the
|
To "Preserve the Title" of such a section when you modify the
|
Document means that it remains a section "Entitled XYZ" according
|
Document means that it remains a section "Entitled XYZ" according
|
to this definition.
|
to this definition.
|
|
|
The Document may include Warranty Disclaimers next to the notice
|
The Document may include Warranty Disclaimers next to the notice
|
which states that this License applies to the Document. These
|
which states that this License applies to the Document. These
|
Warranty Disclaimers are considered to be included by reference in
|
Warranty Disclaimers are considered to be included by reference in
|
this License, but only as regards disclaiming warranties: any other
|
this License, but only as regards disclaiming warranties: any other
|
implication that these Warranty Disclaimers may have is void and
|
implication that these Warranty Disclaimers may have is void and
|
has no effect on the meaning of this License.
|
has no effect on the meaning of this License.
|
|
|
2. VERBATIM COPYING
|
2. VERBATIM COPYING
|
|
|
You may copy and distribute the Document in any medium, either
|
You may copy and distribute the Document in any medium, either
|
commercially or noncommercially, provided that this License, the
|
commercially or noncommercially, provided that this License, the
|
copyright notices, and the license notice saying this License
|
copyright notices, and the license notice saying this License
|
applies to the Document are reproduced in all copies, and that you
|
applies to the Document are reproduced in all copies, and that you
|
add no other conditions whatsoever to those of this License. You
|
add no other conditions whatsoever to those of this License. You
|
may not use technical measures to obstruct or control the reading
|
may not use technical measures to obstruct or control the reading
|
or further copying of the copies you make or distribute. However,
|
or further copying of the copies you make or distribute. However,
|
you may accept compensation in exchange for copies. If you
|
you may accept compensation in exchange for copies. If you
|
distribute a large enough number of copies you must also follow
|
distribute a large enough number of copies you must also follow
|
the conditions in section 3.
|
the conditions in section 3.
|
|
|
You may also lend copies, under the same conditions stated above,
|
You may also lend copies, under the same conditions stated above,
|
and you may publicly display copies.
|
and you may publicly display copies.
|
|
|
3. COPYING IN QUANTITY
|
3. COPYING IN QUANTITY
|
|
|
If you publish printed copies (or copies in media that commonly
|
If you publish printed copies (or copies in media that commonly
|
have printed covers) of the Document, numbering more than 100, and
|
have printed covers) of the Document, numbering more than 100, and
|
the Document's license notice requires Cover Texts, you must
|
the Document's license notice requires Cover Texts, you must
|
enclose the copies in covers that carry, clearly and legibly, all
|
enclose the copies in covers that carry, clearly and legibly, all
|
these Cover Texts: Front-Cover Texts on the front cover, and
|
these Cover Texts: Front-Cover Texts on the front cover, and
|
Back-Cover Texts on the back cover. Both covers must also clearly
|
Back-Cover Texts on the back cover. Both covers must also clearly
|
and legibly identify you as the publisher of these copies. The
|
and legibly identify you as the publisher of these copies. The
|
front cover must present the full title with all words of the
|
front cover must present the full title with all words of the
|
title equally prominent and visible. You may add other material
|
title equally prominent and visible. You may add other material
|
on the covers in addition. Copying with changes limited to the
|
on the covers in addition. Copying with changes limited to the
|
covers, as long as they preserve the title of the Document and
|
covers, as long as they preserve the title of the Document and
|
satisfy these conditions, can be treated as verbatim copying in
|
satisfy these conditions, can be treated as verbatim copying in
|
other respects.
|
other respects.
|
|
|
If the required texts for either cover are too voluminous to fit
|
If the required texts for either cover are too voluminous to fit
|
legibly, you should put the first ones listed (as many as fit
|
legibly, you should put the first ones listed (as many as fit
|
reasonably) on the actual cover, and continue the rest onto
|
reasonably) on the actual cover, and continue the rest onto
|
adjacent pages.
|
adjacent pages.
|
|
|
If you publish or distribute Opaque copies of the Document
|
If you publish or distribute Opaque copies of the Document
|
numbering more than 100, you must either include a
|
numbering more than 100, you must either include a
|
machine-readable Transparent copy along with each Opaque copy, or
|
machine-readable Transparent copy along with each Opaque copy, or
|
state in or with each Opaque copy a computer-network location from
|
state in or with each Opaque copy a computer-network location from
|
which the general network-using public has access to download
|
which the general network-using public has access to download
|
using public-standard network protocols a complete Transparent
|
using public-standard network protocols a complete Transparent
|
copy of the Document, free of added material. If you use the
|
copy of the Document, free of added material. If you use the
|
latter option, you must take reasonably prudent steps, when you
|
latter option, you must take reasonably prudent steps, when you
|
begin distribution of Opaque copies in quantity, to ensure that
|
begin distribution of Opaque copies in quantity, to ensure that
|
this Transparent copy will remain thus accessible at the stated
|
this Transparent copy will remain thus accessible at the stated
|
location until at least one year after the last time you
|
location until at least one year after the last time you
|
distribute an Opaque copy (directly or through your agents or
|
distribute an Opaque copy (directly or through your agents or
|
retailers) of that edition to the public.
|
retailers) of that edition to the public.
|
|
|
It is requested, but not required, that you contact the authors of
|
It is requested, but not required, that you contact the authors of
|
the Document well before redistributing any large number of
|
the Document well before redistributing any large number of
|
copies, to give them a chance to provide you with an updated
|
copies, to give them a chance to provide you with an updated
|
version of the Document.
|
version of the Document.
|
|
|
4. MODIFICATIONS
|
4. MODIFICATIONS
|
|
|
You may copy and distribute a Modified Version of the Document
|
You may copy and distribute a Modified Version of the Document
|
under the conditions of sections 2 and 3 above, provided that you
|
under the conditions of sections 2 and 3 above, provided that you
|
release the Modified Version under precisely this License, with
|
release the Modified Version under precisely this License, with
|
the Modified Version filling the role of the Document, thus
|
the Modified Version filling the role of the Document, thus
|
licensing distribution and modification of the Modified Version to
|
licensing distribution and modification of the Modified Version to
|
whoever possesses a copy of it. In addition, you must do these
|
whoever possesses a copy of it. In addition, you must do these
|
things in the Modified Version:
|
things in the Modified Version:
|
|
|
A. Use in the Title Page (and on the covers, if any) a title
|
A. Use in the Title Page (and on the covers, if any) a title
|
distinct from that of the Document, and from those of
|
distinct from that of the Document, and from those of
|
previous versions (which should, if there were any, be listed
|
previous versions (which should, if there were any, be listed
|
in the History section of the Document). You may use the
|
in the History section of the Document). You may use the
|
same title as a previous version if the original publisher of
|
same title as a previous version if the original publisher of
|
that version gives permission.
|
that version gives permission.
|
|
|
B. List on the Title Page, as authors, one or more persons or
|
B. List on the Title Page, as authors, one or more persons or
|
entities responsible for authorship of the modifications in
|
entities responsible for authorship of the modifications in
|
the Modified Version, together with at least five of the
|
the Modified Version, together with at least five of the
|
principal authors of the Document (all of its principal
|
principal authors of the Document (all of its principal
|
authors, if it has fewer than five), unless they release you
|
authors, if it has fewer than five), unless they release you
|
from this requirement.
|
from this requirement.
|
|
|
C. State on the Title page the name of the publisher of the
|
C. State on the Title page the name of the publisher of the
|
Modified Version, as the publisher.
|
Modified Version, as the publisher.
|
|
|
D. Preserve all the copyright notices of the Document.
|
D. Preserve all the copyright notices of the Document.
|
|
|
E. Add an appropriate copyright notice for your modifications
|
E. Add an appropriate copyright notice for your modifications
|
adjacent to the other copyright notices.
|
adjacent to the other copyright notices.
|
|
|
F. Include, immediately after the copyright notices, a license
|
F. Include, immediately after the copyright notices, a license
|
notice giving the public permission to use the Modified
|
notice giving the public permission to use the Modified
|
Version under the terms of this License, in the form shown in
|
Version under the terms of this License, in the form shown in
|
the Addendum below.
|
the Addendum below.
|
|
|
G. Preserve in that license notice the full lists of Invariant
|
G. Preserve in that license notice the full lists of Invariant
|
Sections and required Cover Texts given in the Document's
|
Sections and required Cover Texts given in the Document's
|
license notice.
|
license notice.
|
|
|
H. Include an unaltered copy of this License.
|
H. Include an unaltered copy of this License.
|
|
|
I. Preserve the section Entitled "History", Preserve its Title,
|
I. Preserve the section Entitled "History", Preserve its Title,
|
and add to it an item stating at least the title, year, new
|
and add to it an item stating at least the title, year, new
|
authors, and publisher of the Modified Version as given on
|
authors, and publisher of the Modified Version as given on
|
the Title Page. If there is no section Entitled "History" in
|
the Title Page. If there is no section Entitled "History" in
|
the Document, create one stating the title, year, authors,
|
the Document, create one stating the title, year, authors,
|
and publisher of the Document as given on its Title Page,
|
and publisher of the Document as given on its Title Page,
|
then add an item describing the Modified Version as stated in
|
then add an item describing the Modified Version as stated in
|
the previous sentence.
|
the previous sentence.
|
|
|
J. Preserve the network location, if any, given in the Document
|
J. Preserve the network location, if any, given in the Document
|
for public access to a Transparent copy of the Document, and
|
for public access to a Transparent copy of the Document, and
|
likewise the network locations given in the Document for
|
likewise the network locations given in the Document for
|
previous versions it was based on. These may be placed in
|
previous versions it was based on. These may be placed in
|
the "History" section. You may omit a network location for a
|
the "History" section. You may omit a network location for a
|
work that was published at least four years before the
|
work that was published at least four years before the
|
Document itself, or if the original publisher of the version
|
Document itself, or if the original publisher of the version
|
it refers to gives permission.
|
it refers to gives permission.
|
|
|
K. For any section Entitled "Acknowledgements" or "Dedications",
|
K. For any section Entitled "Acknowledgements" or "Dedications",
|
Preserve the Title of the section, and preserve in the
|
Preserve the Title of the section, and preserve in the
|
section all the substance and tone of each of the contributor
|
section all the substance and tone of each of the contributor
|
acknowledgements and/or dedications given therein.
|
acknowledgements and/or dedications given therein.
|
|
|
L. Preserve all the Invariant Sections of the Document,
|
L. Preserve all the Invariant Sections of the Document,
|
unaltered in their text and in their titles. Section numbers
|
unaltered in their text and in their titles. Section numbers
|
or the equivalent are not considered part of the section
|
or the equivalent are not considered part of the section
|
titles.
|
titles.
|
|
|
M. Delete any section Entitled "Endorsements". Such a section
|
M. Delete any section Entitled "Endorsements". Such a section
|
may not be included in the Modified Version.
|
may not be included in the Modified Version.
|
|
|
N. Do not retitle any existing section to be Entitled
|
N. Do not retitle any existing section to be Entitled
|
"Endorsements" or to conflict in title with any Invariant
|
"Endorsements" or to conflict in title with any Invariant
|
Section.
|
Section.
|
|
|
O. Preserve any Warranty Disclaimers.
|
O. Preserve any Warranty Disclaimers.
|
|
|
If the Modified Version includes new front-matter sections or
|
If the Modified Version includes new front-matter sections or
|
appendices that qualify as Secondary Sections and contain no
|
appendices that qualify as Secondary Sections and contain no
|
material copied from the Document, you may at your option
|
material copied from the Document, you may at your option
|
designate some or all of these sections as invariant. To do this,
|
designate some or all of these sections as invariant. To do this,
|
add their titles to the list of Invariant Sections in the Modified
|
add their titles to the list of Invariant Sections in the Modified
|
Version's license notice. These titles must be distinct from any
|
Version's license notice. These titles must be distinct from any
|
other section titles.
|
other section titles.
|
|
|
You may add a section Entitled "Endorsements", provided it contains
|
You may add a section Entitled "Endorsements", provided it contains
|
nothing but endorsements of your Modified Version by various
|
nothing but endorsements of your Modified Version by various
|
parties--for example, statements of peer review or that the text
|
parties--for example, statements of peer review or that the text
|
has been approved by an organization as the authoritative
|
has been approved by an organization as the authoritative
|
definition of a standard.
|
definition of a standard.
|
|
|
You may add a passage of up to five words as a Front-Cover Text,
|
You may add a passage of up to five words as a Front-Cover Text,
|
and a passage of up to 25 words as a Back-Cover Text, to the end
|
and a passage of up to 25 words as a Back-Cover Text, to the end
|
of the list of Cover Texts in the Modified Version. Only one
|
of the list of Cover Texts in the Modified Version. Only one
|
passage of Front-Cover Text and one of Back-Cover Text may be
|
passage of Front-Cover Text and one of Back-Cover Text may be
|
added by (or through arrangements made by) any one entity. If the
|
added by (or through arrangements made by) any one entity. If the
|
Document already includes a cover text for the same cover,
|
Document already includes a cover text for the same cover,
|
previously added by you or by arrangement made by the same entity
|
previously added by you or by arrangement made by the same entity
|
you are acting on behalf of, you may not add another; but you may
|
you are acting on behalf of, you may not add another; but you may
|
replace the old one, on explicit permission from the previous
|
replace the old one, on explicit permission from the previous
|
publisher that added the old one.
|
publisher that added the old one.
|
|
|
The author(s) and publisher(s) of the Document do not by this
|
The author(s) and publisher(s) of the Document do not by this
|
License give permission to use their names for publicity for or to
|
License give permission to use their names for publicity for or to
|
assert or imply endorsement of any Modified Version.
|
assert or imply endorsement of any Modified Version.
|
|
|
5. COMBINING DOCUMENTS
|
5. COMBINING DOCUMENTS
|
|
|
You may combine the Document with other documents released under
|
You may combine the Document with other documents released under
|
this License, under the terms defined in section 4 above for
|
this License, under the terms defined in section 4 above for
|
modified versions, provided that you include in the combination
|
modified versions, provided that you include in the combination
|
all of the Invariant Sections of all of the original documents,
|
all of the Invariant Sections of all of the original documents,
|
unmodified, and list them all as Invariant Sections of your
|
unmodified, and list them all as Invariant Sections of your
|
combined work in its license notice, and that you preserve all
|
combined work in its license notice, and that you preserve all
|
their Warranty Disclaimers.
|
their Warranty Disclaimers.
|
|
|
The combined work need only contain one copy of this License, and
|
The combined work need only contain one copy of this License, and
|
multiple identical Invariant Sections may be replaced with a single
|
multiple identical Invariant Sections may be replaced with a single
|
copy. If there are multiple Invariant Sections with the same name
|
copy. If there are multiple Invariant Sections with the same name
|
but different contents, make the title of each such section unique
|
but different contents, make the title of each such section unique
|
by adding at the end of it, in parentheses, the name of the
|
by adding at the end of it, in parentheses, the name of the
|
original author or publisher of that section if known, or else a
|
original author or publisher of that section if known, or else a
|
unique number. Make the same adjustment to the section titles in
|
unique number. Make the same adjustment to the section titles in
|
the list of Invariant Sections in the license notice of the
|
the list of Invariant Sections in the license notice of the
|
combined work.
|
combined work.
|
|
|
In the combination, you must combine any sections Entitled
|
In the combination, you must combine any sections Entitled
|
"History" in the various original documents, forming one section
|
"History" in the various original documents, forming one section
|
Entitled "History"; likewise combine any sections Entitled
|
Entitled "History"; likewise combine any sections Entitled
|
"Acknowledgements", and any sections Entitled "Dedications". You
|
"Acknowledgements", and any sections Entitled "Dedications". You
|
must delete all sections Entitled "Endorsements."
|
must delete all sections Entitled "Endorsements."
|
|
|
6. COLLECTIONS OF DOCUMENTS
|
6. COLLECTIONS OF DOCUMENTS
|
|
|
You may make a collection consisting of the Document and other
|
You may make a collection consisting of the Document and other
|
documents released under this License, and replace the individual
|
documents released under this License, and replace the individual
|
copies of this License in the various documents with a single copy
|
copies of this License in the various documents with a single copy
|
that is included in the collection, provided that you follow the
|
that is included in the collection, provided that you follow the
|
rules of this License for verbatim copying of each of the
|
rules of this License for verbatim copying of each of the
|
documents in all other respects.
|
documents in all other respects.
|
|
|
You may extract a single document from such a collection, and
|
You may extract a single document from such a collection, and
|
distribute it individually under this License, provided you insert
|
distribute it individually under this License, provided you insert
|
a copy of this License into the extracted document, and follow
|
a copy of this License into the extracted document, and follow
|
this License in all other respects regarding verbatim copying of
|
this License in all other respects regarding verbatim copying of
|
that document.
|
that document.
|
|
|
7. AGGREGATION WITH INDEPENDENT WORKS
|
7. AGGREGATION WITH INDEPENDENT WORKS
|
|
|
A compilation of the Document or its derivatives with other
|
A compilation of the Document or its derivatives with other
|
separate and independent documents or works, in or on a volume of
|
separate and independent documents or works, in or on a volume of
|
a storage or distribution medium, is called an "aggregate" if the
|
a storage or distribution medium, is called an "aggregate" if the
|
copyright resulting from the compilation is not used to limit the
|
copyright resulting from the compilation is not used to limit the
|
legal rights of the compilation's users beyond what the individual
|
legal rights of the compilation's users beyond what the individual
|
works permit. When the Document is included in an aggregate, this
|
works permit. When the Document is included in an aggregate, this
|
License does not apply to the other works in the aggregate which
|
License does not apply to the other works in the aggregate which
|
are not themselves derivative works of the Document.
|
are not themselves derivative works of the Document.
|
|
|
If the Cover Text requirement of section 3 is applicable to these
|
If the Cover Text requirement of section 3 is applicable to these
|
copies of the Document, then if the Document is less than one half
|
copies of the Document, then if the Document is less than one half
|
of the entire aggregate, the Document's Cover Texts may be placed
|
of the entire aggregate, the Document's Cover Texts may be placed
|
on covers that bracket the Document within the aggregate, or the
|
on covers that bracket the Document within the aggregate, or the
|
electronic equivalent of covers if the Document is in electronic
|
electronic equivalent of covers if the Document is in electronic
|
form. Otherwise they must appear on printed covers that bracket
|
form. Otherwise they must appear on printed covers that bracket
|
the whole aggregate.
|
the whole aggregate.
|
|
|
8. TRANSLATION
|
8. TRANSLATION
|
|
|
Translation is considered a kind of modification, so you may
|
Translation is considered a kind of modification, so you may
|
distribute translations of the Document under the terms of section
|
distribute translations of the Document under the terms of section
|
4. Replacing Invariant Sections with translations requires special
|
4. Replacing Invariant Sections with translations requires special
|
permission from their copyright holders, but you may include
|
permission from their copyright holders, but you may include
|
translations of some or all Invariant Sections in addition to the
|
translations of some or all Invariant Sections in addition to the
|
original versions of these Invariant Sections. You may include a
|
original versions of these Invariant Sections. You may include a
|
translation of this License, and all the license notices in the
|
translation of this License, and all the license notices in the
|
Document, and any Warranty Disclaimers, provided that you also
|
Document, and any Warranty Disclaimers, provided that you also
|
include the original English version of this License and the
|
include the original English version of this License and the
|
original versions of those notices and disclaimers. In case of a
|
original versions of those notices and disclaimers. In case of a
|
disagreement between the translation and the original version of
|
disagreement between the translation and the original version of
|
this License or a notice or disclaimer, the original version will
|
this License or a notice or disclaimer, the original version will
|
prevail.
|
prevail.
|
|
|
If a section in the Document is Entitled "Acknowledgements",
|
If a section in the Document is Entitled "Acknowledgements",
|
"Dedications", or "History", the requirement (section 4) to
|
"Dedications", or "History", the requirement (section 4) to
|
Preserve its Title (section 1) will typically require changing the
|
Preserve its Title (section 1) will typically require changing the
|
actual title.
|
actual title.
|
|
|
9. TERMINATION
|
9. TERMINATION
|
|
|
You may not copy, modify, sublicense, or distribute the Document
|
You may not copy, modify, sublicense, or distribute the Document
|
except as expressly provided for under this License. Any other
|
except as expressly provided for under this License. Any other
|
attempt to copy, modify, sublicense or distribute the Document is
|
attempt to copy, modify, sublicense or distribute the Document is
|
void, and will automatically terminate your rights under this
|
void, and will automatically terminate your rights under this
|
License. However, parties who have received copies, or rights,
|
License. However, parties who have received copies, or rights,
|
from you under this License will not have their licenses
|
from you under this License will not have their licenses
|
terminated so long as such parties remain in full compliance.
|
terminated so long as such parties remain in full compliance.
|
|
|
10. FUTURE REVISIONS OF THIS LICENSE
|
10. FUTURE REVISIONS OF THIS LICENSE
|
|
|
The Free Software Foundation may publish new, revised versions of
|
The Free Software Foundation may publish new, revised versions of
|
the GNU Free Documentation License from time to time. Such new
|
the GNU Free Documentation License from time to time. Such new
|
versions will be similar in spirit to the present version, but may
|
versions will be similar in spirit to the present version, but may
|
differ in detail to address new problems or concerns. See
|
differ in detail to address new problems or concerns. See
|
`http://www.gnu.org/copyleft/'.
|
`http://www.gnu.org/copyleft/'.
|
|
|
Each version of the License is given a distinguishing version
|
Each version of the License is given a distinguishing version
|
number. If the Document specifies that a particular numbered
|
number. If the Document specifies that a particular numbered
|
version of this License "or any later version" applies to it, you
|
version of this License "or any later version" applies to it, you
|
have the option of following the terms and conditions either of
|
have the option of following the terms and conditions either of
|
that specified version or of any later version that has been
|
that specified version or of any later version that has been
|
published (not as a draft) by the Free Software Foundation. If
|
published (not as a draft) by the Free Software Foundation. If
|
the Document does not specify a version number of this License,
|
the Document does not specify a version number of this License,
|
you may choose any version ever published (not as a draft) by the
|
you may choose any version ever published (not as a draft) by the
|
Free Software Foundation.
|
Free Software Foundation.
|
|
|
ADDENDUM: How to use this License for your documents
|
ADDENDUM: How to use this License for your documents
|
====================================================
|
====================================================
|
|
|
To use this License in a document you have written, include a copy of
|
To use this License in a document you have written, include a copy of
|
the License in the document and put the following copyright and license
|
the License in the document and put the following copyright and license
|
notices just after the title page:
|
notices just after the title page:
|
|
|
Copyright (C) YEAR YOUR NAME.
|
Copyright (C) YEAR YOUR NAME.
|
Permission is granted to copy, distribute and/or modify this document
|
Permission is granted to copy, distribute and/or modify this document
|
under the terms of the GNU Free Documentation License, Version 1.2
|
under the terms of the GNU Free Documentation License, Version 1.2
|
or any later version published by the Free Software Foundation;
|
or any later version published by the Free Software Foundation;
|
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
|
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
|
Texts. A copy of the license is included in the section entitled ``GNU
|
Texts. A copy of the license is included in the section entitled ``GNU
|
Free Documentation License''.
|
Free Documentation License''.
|
|
|
If you have Invariant Sections, Front-Cover Texts and Back-Cover
|
If you have Invariant Sections, Front-Cover Texts and Back-Cover
|
Texts, replace the "with...Texts." line with this:
|
Texts, replace the "with...Texts." line with this:
|
|
|
with the Invariant Sections being LIST THEIR TITLES, with
|
with the Invariant Sections being LIST THEIR TITLES, with
|
the Front-Cover Texts being LIST, and with the Back-Cover Texts
|
the Front-Cover Texts being LIST, and with the Back-Cover Texts
|
being LIST.
|
being LIST.
|
|
|
If you have Invariant Sections without Cover Texts, or some other
|
If you have Invariant Sections without Cover Texts, or some other
|
combination of the three, merge those two alternatives to suit the
|
combination of the three, merge those two alternatives to suit the
|
situation.
|
situation.
|
|
|
If your document contains nontrivial examples of program code, we
|
If your document contains nontrivial examples of program code, we
|
recommend releasing these examples in parallel under your choice of
|
recommend releasing these examples in parallel under your choice of
|
free software license, such as the GNU General Public License, to
|
free software license, such as the GNU General Public License, to
|
permit their use in free software.
|
permit their use in free software.
|
|
|
|
|
File: gccinstall.info, Node: Concept Index, Prev: GNU Free Documentation License, Up: Top
|
File: gccinstall.info, Node: Concept Index, Prev: GNU Free Documentation License, Up: Top
|
|
|
Concept Index
|
Concept Index
|
*************
|
*************
|
|
|
|