@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1999, 2002, 2008
|
@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1999, 2002, 2008
|
@c Free Software Foundation, Inc.
|
@c Free Software Foundation, Inc.
|
@c This is part of the GAS manual.
|
@c This is part of the GAS manual.
|
@c For copying conditions, see the file as.texinfo.
|
@c For copying conditions, see the file as.texinfo.
|
@ifset GENERIC
|
@ifset GENERIC
|
@page
|
@page
|
@node Sparc-Dependent
|
@node Sparc-Dependent
|
@chapter SPARC Dependent Features
|
@chapter SPARC Dependent Features
|
@end ifset
|
@end ifset
|
@ifclear GENERIC
|
@ifclear GENERIC
|
@node Machine Dependencies
|
@node Machine Dependencies
|
@chapter SPARC Dependent Features
|
@chapter SPARC Dependent Features
|
@end ifclear
|
@end ifclear
|
|
|
@cindex SPARC support
|
@cindex SPARC support
|
@menu
|
@menu
|
* Sparc-Opts:: Options
|
* Sparc-Opts:: Options
|
* Sparc-Aligned-Data:: Option to enforce aligned data
|
* Sparc-Aligned-Data:: Option to enforce aligned data
|
* Sparc-Syntax:: Syntax
|
* Sparc-Syntax:: Syntax
|
* Sparc-Float:: Floating Point
|
* Sparc-Float:: Floating Point
|
* Sparc-Directives:: Sparc Machine Directives
|
* Sparc-Directives:: Sparc Machine Directives
|
@end menu
|
@end menu
|
|
|
@node Sparc-Opts
|
@node Sparc-Opts
|
@section Options
|
@section Options
|
|
|
@cindex options for SPARC
|
@cindex options for SPARC
|
@cindex SPARC options
|
@cindex SPARC options
|
@cindex architectures, SPARC
|
@cindex architectures, SPARC
|
@cindex SPARC architectures
|
@cindex SPARC architectures
|
The SPARC chip family includes several successive versions, using the same
|
The SPARC chip family includes several successive versions, using the same
|
core instruction set, but including a few additional instructions at
|
core instruction set, but including a few additional instructions at
|
each version. There are exceptions to this however. For details on what
|
each version. There are exceptions to this however. For details on what
|
instructions each variant supports, please see the chip's architecture
|
instructions each variant supports, please see the chip's architecture
|
reference manual.
|
reference manual.
|
|
|
By default, @code{@value{AS}} assumes the core instruction set (SPARC
|
By default, @code{@value{AS}} assumes the core instruction set (SPARC
|
v6), but ``bumps'' the architecture level as needed: it switches to
|
v6), but ``bumps'' the architecture level as needed: it switches to
|
successively higher architectures as it encounters instructions that
|
successively higher architectures as it encounters instructions that
|
only exist in the higher levels.
|
only exist in the higher levels.
|
|
|
If not configured for SPARC v9 (@code{sparc64-*-*}) GAS will not bump
|
If not configured for SPARC v9 (@code{sparc64-*-*}) GAS will not bump
|
past sparclite by default, an option must be passed to enable the
|
past sparclite by default, an option must be passed to enable the
|
v9 instructions.
|
v9 instructions.
|
|
|
GAS treats sparclite as being compatible with v8, unless an architecture
|
GAS treats sparclite as being compatible with v8, unless an architecture
|
is explicitly requested. SPARC v9 is always incompatible with sparclite.
|
is explicitly requested. SPARC v9 is always incompatible with sparclite.
|
|
|
@c The order here is the same as the order of enum sparc_opcode_arch_val
|
@c The order here is the same as the order of enum sparc_opcode_arch_val
|
@c to give the user a sense of the order of the "bumping".
|
@c to give the user a sense of the order of the "bumping".
|
|
|
@table @code
|
@table @code
|
@kindex -Av6
|
@kindex -Av6
|
@kindex Av7
|
@kindex Av7
|
@kindex -Av8
|
@kindex -Av8
|
@kindex -Asparclet
|
@kindex -Asparclet
|
@kindex -Asparclite
|
@kindex -Asparclite
|
@kindex -Av9
|
@kindex -Av9
|
@kindex -Av9a
|
@kindex -Av9a
|
@item -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
|
@item -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
|
@itemx -Av8plus | -Av8plusa | -Av9 | -Av9a
|
@itemx -Av8plus | -Av8plusa | -Av9 | -Av9a
|
Use one of the @samp{-A} options to select one of the SPARC
|
Use one of the @samp{-A} options to select one of the SPARC
|
architectures explicitly. If you select an architecture explicitly,
|
architectures explicitly. If you select an architecture explicitly,
|
@code{@value{AS}} reports a fatal error if it encounters an instruction
|
@code{@value{AS}} reports a fatal error if it encounters an instruction
|
or feature requiring an incompatible or higher level.
|
or feature requiring an incompatible or higher level.
|
|
|
@samp{-Av8plus} and @samp{-Av8plusa} select a 32 bit environment.
|
@samp{-Av8plus} and @samp{-Av8plusa} select a 32 bit environment.
|
|
|
@samp{-Av9} and @samp{-Av9a} select a 64 bit environment and are not
|
@samp{-Av9} and @samp{-Av9a} select a 64 bit environment and are not
|
available unless GAS is explicitly configured with 64 bit environment
|
available unless GAS is explicitly configured with 64 bit environment
|
support.
|
support.
|
|
|
@samp{-Av8plusa} and @samp{-Av9a} enable the SPARC V9 instruction set with
|
@samp{-Av8plusa} and @samp{-Av9a} enable the SPARC V9 instruction set with
|
UltraSPARC extensions.
|
UltraSPARC extensions.
|
|
|
@item -xarch=v8plus | -xarch=v8plusa
|
@item -xarch=v8plus | -xarch=v8plusa
|
For compatibility with the SunOS v9 assembler. These options are
|
For compatibility with the SunOS v9 assembler. These options are
|
equivalent to -Av8plus and -Av8plusa, respectively.
|
equivalent to -Av8plus and -Av8plusa, respectively.
|
|
|
@item -bump
|
@item -bump
|
Warn whenever it is necessary to switch to another level.
|
Warn whenever it is necessary to switch to another level.
|
If an architecture level is explicitly requested, GAS will not issue
|
If an architecture level is explicitly requested, GAS will not issue
|
warnings until that level is reached, and will then bump the level
|
warnings until that level is reached, and will then bump the level
|
as required (except between incompatible levels).
|
as required (except between incompatible levels).
|
|
|
@item -32 | -64
|
@item -32 | -64
|
Select the word size, either 32 bits or 64 bits.
|
Select the word size, either 32 bits or 64 bits.
|
These options are only available with the ELF object file format,
|
These options are only available with the ELF object file format,
|
and require that the necessary BFD support has been included.
|
and require that the necessary BFD support has been included.
|
@end table
|
@end table
|
|
|
@node Sparc-Aligned-Data
|
@node Sparc-Aligned-Data
|
@section Enforcing aligned data
|
@section Enforcing aligned data
|
|
|
@cindex data alignment on SPARC
|
@cindex data alignment on SPARC
|
@cindex SPARC data alignment
|
@cindex SPARC data alignment
|
SPARC GAS normally permits data to be misaligned. For example, it
|
SPARC GAS normally permits data to be misaligned. For example, it
|
permits the @code{.long} pseudo-op to be used on a byte boundary.
|
permits the @code{.long} pseudo-op to be used on a byte boundary.
|
However, the native SunOS assemblers issue an error when they see
|
However, the native SunOS assemblers issue an error when they see
|
misaligned data.
|
misaligned data.
|
|
|
@kindex --enforce-aligned-data
|
@kindex --enforce-aligned-data
|
You can use the @code{--enforce-aligned-data} option to make SPARC GAS
|
You can use the @code{--enforce-aligned-data} option to make SPARC GAS
|
also issue an error about misaligned data, just as the SunOS
|
also issue an error about misaligned data, just as the SunOS
|
assemblers do.
|
assemblers do.
|
|
|
The @code{--enforce-aligned-data} option is not the default because gcc
|
The @code{--enforce-aligned-data} option is not the default because gcc
|
issues misaligned data pseudo-ops when it initializes certain packed
|
issues misaligned data pseudo-ops when it initializes certain packed
|
data structures (structures defined using the @code{packed} attribute).
|
data structures (structures defined using the @code{packed} attribute).
|
You may have to assemble with GAS in order to initialize packed data
|
You may have to assemble with GAS in order to initialize packed data
|
structures in your own code.
|
structures in your own code.
|
|
|
@cindex SPARC syntax
|
@cindex SPARC syntax
|
@cindex syntax, SPARC
|
@cindex syntax, SPARC
|
@node Sparc-Syntax
|
@node Sparc-Syntax
|
@section Sparc Syntax
|
@section Sparc Syntax
|
The assembler syntax closely follows The Sparc Architecture Manual,
|
The assembler syntax closely follows The Sparc Architecture Manual,
|
versions 8 and 9, as well as most extensions defined by Sun
|
versions 8 and 9, as well as most extensions defined by Sun
|
for their UltraSPARC and Niagara line of processors.
|
for their UltraSPARC and Niagara line of processors.
|
|
|
@menu
|
@menu
|
* Sparc-Chars:: Special Characters
|
* Sparc-Chars:: Special Characters
|
* Sparc-Regs:: Register Names
|
* Sparc-Regs:: Register Names
|
* Sparc-Constants:: Constant Names
|
* Sparc-Constants:: Constant Names
|
* Sparc-Relocs:: Relocations
|
* Sparc-Relocs:: Relocations
|
* Sparc-Size-Translations:: Size Translations
|
* Sparc-Size-Translations:: Size Translations
|
@end menu
|
@end menu
|
|
|
@node Sparc-Chars
|
@node Sparc-Chars
|
@subsection Special Characters
|
@subsection Special Characters
|
|
|
@cindex line comment character, Sparc
|
@cindex line comment character, Sparc
|
@cindex Sparc line comment character
|
@cindex Sparc line comment character
|
@samp{#} is the line comment character.
|
@samp{#} is the line comment character.
|
|
|
@cindex line separator, Sparc
|
@cindex line separator, Sparc
|
@cindex statement separator, Sparc
|
@cindex statement separator, Sparc
|
@cindex Sparc line separator
|
@cindex Sparc line separator
|
@samp{;} can be used instead of a newline to separate statements.
|
@samp{;} can be used instead of a newline to separate statements.
|
|
|
@node Sparc-Regs
|
@node Sparc-Regs
|
@subsection Register Names
|
@subsection Register Names
|
@cindex Sparc registers
|
@cindex Sparc registers
|
@cindex register names, Sparc
|
@cindex register names, Sparc
|
|
|
The Sparc integer register file is broken down into global,
|
The Sparc integer register file is broken down into global,
|
outgoing, local, and incoming.
|
outgoing, local, and incoming.
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
The 8 global registers are referred to as @samp{%g@var{n}}.
|
The 8 global registers are referred to as @samp{%g@var{n}}.
|
|
|
@item
|
@item
|
The 8 outgoing registers are referred to as @samp{%o@var{n}}.
|
The 8 outgoing registers are referred to as @samp{%o@var{n}}.
|
|
|
@item
|
@item
|
The 8 local registers are referred to as @samp{%l@var{n}}.
|
The 8 local registers are referred to as @samp{%l@var{n}}.
|
|
|
@item
|
@item
|
The 8 incoming registers are referred to as @samp{%i@var{n}}.
|
The 8 incoming registers are referred to as @samp{%i@var{n}}.
|
|
|
@item
|
@item
|
The frame pointer register @samp{%i6} can be referenced using
|
The frame pointer register @samp{%i6} can be referenced using
|
the alias @samp{%fp}.
|
the alias @samp{%fp}.
|
|
|
@item
|
@item
|
The stack pointer register @samp{%o6} can be referenced using
|
The stack pointer register @samp{%o6} can be referenced using
|
the alias @samp{%sp}.
|
the alias @samp{%sp}.
|
@end itemize
|
@end itemize
|
|
|
Floating point registers are simply referred to as @samp{%f@var{n}}.
|
Floating point registers are simply referred to as @samp{%f@var{n}}.
|
When assembling for pre-V9, only 32 floating point registers
|
When assembling for pre-V9, only 32 floating point registers
|
are available. For V9 and later there are 64, but there are
|
are available. For V9 and later there are 64, but there are
|
restrictions when referencing the upper 32 registers. They
|
restrictions when referencing the upper 32 registers. They
|
can only be accessed as double or quad, and thus only even
|
can only be accessed as double or quad, and thus only even
|
or quad numbered accesses are allowed. For example, @samp{%f34}
|
or quad numbered accesses are allowed. For example, @samp{%f34}
|
is a legal floating point register, but @samp{%f35} is not.
|
is a legal floating point register, but @samp{%f35} is not.
|
|
|
Certain V9 instructions allow access to ancillary state registers.
|
Certain V9 instructions allow access to ancillary state registers.
|
Most simply they can be referred to as @samp{%asr@var{n}} where
|
Most simply they can be referred to as @samp{%asr@var{n}} where
|
@var{n} can be from 16 to 31. However, there are some aliases
|
@var{n} can be from 16 to 31. However, there are some aliases
|
defined to reference ASR registers defined for various UltraSPARC
|
defined to reference ASR registers defined for various UltraSPARC
|
processors:
|
processors:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
The tick compare register is referred to as @samp{%tick_cmpr}.
|
The tick compare register is referred to as @samp{%tick_cmpr}.
|
|
|
@item
|
@item
|
The system tick register is referred to as @samp{%stick}. An alias,
|
The system tick register is referred to as @samp{%stick}. An alias,
|
@samp{%sys_tick}, exists but is deprecated and should not be used
|
@samp{%sys_tick}, exists but is deprecated and should not be used
|
by new software.
|
by new software.
|
|
|
@item
|
@item
|
The system tick compare register is referred to as @samp{%stick_cmpr}.
|
The system tick compare register is referred to as @samp{%stick_cmpr}.
|
An alias, @samp{%sys_tick_cmpr}, exists but is deprecated and should
|
An alias, @samp{%sys_tick_cmpr}, exists but is deprecated and should
|
not be used by new software.
|
not be used by new software.
|
|
|
@item
|
@item
|
The software interrupt register is referred to as @samp{%softint}.
|
The software interrupt register is referred to as @samp{%softint}.
|
|
|
@item
|
@item
|
The set software interrupt register is referred to as @samp{%set_softint}.
|
The set software interrupt register is referred to as @samp{%set_softint}.
|
The mnemonic @samp{%softint_set} is provided as an alias.
|
The mnemonic @samp{%softint_set} is provided as an alias.
|
|
|
@item
|
@item
|
The clear software interrupt register is referred to as
|
The clear software interrupt register is referred to as
|
@samp{%clear_softint}. The mnemonic @samp{%softint_clear} is provided
|
@samp{%clear_softint}. The mnemonic @samp{%softint_clear} is provided
|
as an alias.
|
as an alias.
|
|
|
@item
|
@item
|
The performance instrumentation counters register is referred to as
|
The performance instrumentation counters register is referred to as
|
@samp{%pic}.
|
@samp{%pic}.
|
|
|
@item
|
@item
|
The performance control register is referred to as @samp{%pcr}.
|
The performance control register is referred to as @samp{%pcr}.
|
|
|
@item
|
@item
|
The graphics status register is referred to as @samp{%gsr}.
|
The graphics status register is referred to as @samp{%gsr}.
|
|
|
@item
|
@item
|
The V9 dispatch control register is referred to as @samp{%dcr}.
|
The V9 dispatch control register is referred to as @samp{%dcr}.
|
@end itemize
|
@end itemize
|
|
|
Various V9 branch and conditional move instructions allow
|
Various V9 branch and conditional move instructions allow
|
specification of which set of integer condition codes to
|
specification of which set of integer condition codes to
|
test. These are referred to as @samp{%xcc} and @samp{%icc}.
|
test. These are referred to as @samp{%xcc} and @samp{%icc}.
|
|
|
In V9, there are 4 sets of floating point condition codes
|
In V9, there are 4 sets of floating point condition codes
|
which are referred to as @samp{%fcc@var{n}}.
|
which are referred to as @samp{%fcc@var{n}}.
|
|
|
Several special privileged and non-privileged registers
|
Several special privileged and non-privileged registers
|
exist:
|
exist:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
The V9 address space identifier register is referred to as @samp{%asi}.
|
The V9 address space identifier register is referred to as @samp{%asi}.
|
|
|
@item
|
@item
|
The V9 restorable windows register is referred to as @samp{%canrestore}.
|
The V9 restorable windows register is referred to as @samp{%canrestore}.
|
|
|
@item
|
@item
|
The V9 savable windows register is referred to as @samp{%cansave}.
|
The V9 savable windows register is referred to as @samp{%cansave}.
|
|
|
@item
|
@item
|
The V9 clean windows register is referred to as @samp{%cleanwin}.
|
The V9 clean windows register is referred to as @samp{%cleanwin}.
|
|
|
@item
|
@item
|
The V9 current window pointer register is referred to as @samp{%cwp}.
|
The V9 current window pointer register is referred to as @samp{%cwp}.
|
|
|
@item
|
@item
|
The floating-point queue register is referred to as @samp{%fq}.
|
The floating-point queue register is referred to as @samp{%fq}.
|
|
|
@item
|
@item
|
The V8 co-processor queue register is referred to as @samp{%cq}.
|
The V8 co-processor queue register is referred to as @samp{%cq}.
|
|
|
@item
|
@item
|
The floating point status register is referred to as @samp{%fsr}.
|
The floating point status register is referred to as @samp{%fsr}.
|
|
|
@item
|
@item
|
The other windows register is referred to as @samp{%otherwin}.
|
The other windows register is referred to as @samp{%otherwin}.
|
|
|
@item
|
@item
|
The V9 program counter register is referred to as @samp{%pc}.
|
The V9 program counter register is referred to as @samp{%pc}.
|
|
|
@item
|
@item
|
The V9 next program counter register is referred to as @samp{%npc}.
|
The V9 next program counter register is referred to as @samp{%npc}.
|
|
|
@item
|
@item
|
The V9 processor interrupt level register is referred to as @samp{%pil}.
|
The V9 processor interrupt level register is referred to as @samp{%pil}.
|
|
|
@item
|
@item
|
The V9 processor state register is referred to as @samp{%pstate}.
|
The V9 processor state register is referred to as @samp{%pstate}.
|
|
|
@item
|
@item
|
The trap base address register is referred to as @samp{%tba}.
|
The trap base address register is referred to as @samp{%tba}.
|
|
|
@item
|
@item
|
The V9 tick register is referred to as @samp{%tick}.
|
The V9 tick register is referred to as @samp{%tick}.
|
|
|
@item
|
@item
|
The V9 trap level is referred to as @samp{%tl}.
|
The V9 trap level is referred to as @samp{%tl}.
|
|
|
@item
|
@item
|
The V9 trap program counter is referred to as @samp{%tpc}.
|
The V9 trap program counter is referred to as @samp{%tpc}.
|
|
|
@item
|
@item
|
The V9 trap next program counter is referred to as @samp{%tnpc}.
|
The V9 trap next program counter is referred to as @samp{%tnpc}.
|
|
|
@item
|
@item
|
The V9 trap state is referred to as @samp{%tstate}.
|
The V9 trap state is referred to as @samp{%tstate}.
|
|
|
@item
|
@item
|
The V9 trap type is referred to as @samp{%tt}.
|
The V9 trap type is referred to as @samp{%tt}.
|
|
|
@item
|
@item
|
The V9 condition codes is referred to as @samp{%ccr}.
|
The V9 condition codes is referred to as @samp{%ccr}.
|
|
|
@item
|
@item
|
The V9 floating-point registers state is referred to as @samp{%fprs}.
|
The V9 floating-point registers state is referred to as @samp{%fprs}.
|
|
|
@item
|
@item
|
The V9 version register is referred to as @samp{%ver}.
|
The V9 version register is referred to as @samp{%ver}.
|
|
|
@item
|
@item
|
The V9 window state register is referred to as @samp{%wstate}.
|
The V9 window state register is referred to as @samp{%wstate}.
|
|
|
@item
|
@item
|
The Y register is referred to as @samp{%y}.
|
The Y register is referred to as @samp{%y}.
|
|
|
@item
|
@item
|
The V8 window invalid mask register is referred to as @samp{%wim}.
|
The V8 window invalid mask register is referred to as @samp{%wim}.
|
|
|
@item
|
@item
|
The V8 processor state register is referred to as @samp{%psr}.
|
The V8 processor state register is referred to as @samp{%psr}.
|
|
|
@item
|
@item
|
The V9 global register level register is referred to as @samp{%gl}.
|
The V9 global register level register is referred to as @samp{%gl}.
|
@end itemize
|
@end itemize
|
|
|
Several special register names exist for hypervisor mode code:
|
Several special register names exist for hypervisor mode code:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
The hyperprivileged processor state register is referred to as
|
The hyperprivileged processor state register is referred to as
|
@samp{%hpstate}.
|
@samp{%hpstate}.
|
|
|
@item
|
@item
|
The hyperprivileged trap state register is referred to as @samp{%htstate}.
|
The hyperprivileged trap state register is referred to as @samp{%htstate}.
|
|
|
@item
|
@item
|
The hyperprivileged interrupt pending register is referred to as
|
The hyperprivileged interrupt pending register is referred to as
|
@samp{%hintp}.
|
@samp{%hintp}.
|
|
|
@item
|
@item
|
The hyperprivileged trap base address register is referred to as
|
The hyperprivileged trap base address register is referred to as
|
@samp{%htba}.
|
@samp{%htba}.
|
|
|
@item
|
@item
|
The hyperprivileged implementation version register is referred
|
The hyperprivileged implementation version register is referred
|
to as @samp{%hver}.
|
to as @samp{%hver}.
|
|
|
@item
|
@item
|
The hyperprivileged system tick compare register is referred
|
The hyperprivileged system tick compare register is referred
|
to as @samp{%hstick_cmpr}. Note that there is no @samp{%hstick}
|
to as @samp{%hstick_cmpr}. Note that there is no @samp{%hstick}
|
register, the normal @samp{%stick} is used.
|
register, the normal @samp{%stick} is used.
|
@end itemize
|
@end itemize
|
|
|
@node Sparc-Constants
|
@node Sparc-Constants
|
@subsection Constants
|
@subsection Constants
|
@cindex Sparc constants
|
@cindex Sparc constants
|
@cindex constants, Sparc
|
@cindex constants, Sparc
|
|
|
Several Sparc instructions take an immediate operand field for
|
Several Sparc instructions take an immediate operand field for
|
which mnemonic names exist. Two such examples are @samp{membar}
|
which mnemonic names exist. Two such examples are @samp{membar}
|
and @samp{prefetch}. Another example are the set of V9
|
and @samp{prefetch}. Another example are the set of V9
|
memory access instruction that allow specification of an
|
memory access instruction that allow specification of an
|
address space identifier.
|
address space identifier.
|
|
|
The @samp{membar} instruction specifies a memory barrier that is
|
The @samp{membar} instruction specifies a memory barrier that is
|
the defined by the operand which is a bitmask. The supported
|
the defined by the operand which is a bitmask. The supported
|
mask mnemonics are:
|
mask mnemonics are:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
@samp{#Sync} requests that all operations (including nonmemory
|
@samp{#Sync} requests that all operations (including nonmemory
|
reference operations) appearing prior to the @code{membar} must have
|
reference operations) appearing prior to the @code{membar} must have
|
been performed and the effects of any exceptions become visible before
|
been performed and the effects of any exceptions become visible before
|
any instructions after the @code{membar} may be initiated. This
|
any instructions after the @code{membar} may be initiated. This
|
corresponds to @code{membar} cmask field bit 2.
|
corresponds to @code{membar} cmask field bit 2.
|
|
|
@item
|
@item
|
@samp{#MemIssue} requests that all memory reference operations
|
@samp{#MemIssue} requests that all memory reference operations
|
appearing prior to the @code{membar} must have been performed before
|
appearing prior to the @code{membar} must have been performed before
|
any memory operation after the @code{membar} may be initiated. This
|
any memory operation after the @code{membar} may be initiated. This
|
corresponds to @code{membar} cmask field bit 1.
|
corresponds to @code{membar} cmask field bit 1.
|
|
|
@item
|
@item
|
@samp{#Lookaside} requests that a store appearing prior to the
|
@samp{#Lookaside} requests that a store appearing prior to the
|
@code{membar} must complete before any load following the
|
@code{membar} must complete before any load following the
|
@code{membar} referencing the same address can be initiated. This
|
@code{membar} referencing the same address can be initiated. This
|
corresponds to @code{membar} cmask field bit 0.
|
corresponds to @code{membar} cmask field bit 0.
|
|
|
@item
|
@item
|
@samp{#StoreStore} defines that the effects of all stores appearing
|
@samp{#StoreStore} defines that the effects of all stores appearing
|
prior to the @code{membar} instruction must be visible to all
|
prior to the @code{membar} instruction must be visible to all
|
processors before the effect of any stores following the
|
processors before the effect of any stores following the
|
@code{membar}. Equivalent to the deprecated @code{stbar} instruction.
|
@code{membar}. Equivalent to the deprecated @code{stbar} instruction.
|
This corresponds to @code{membar} mmask field bit 3.
|
This corresponds to @code{membar} mmask field bit 3.
|
|
|
@item
|
@item
|
@samp{#LoadStore} defines all loads appearing prior to the
|
@samp{#LoadStore} defines all loads appearing prior to the
|
@code{membar} instruction must have been performed before the effect
|
@code{membar} instruction must have been performed before the effect
|
of any stores following the @code{membar} is visible to any other
|
of any stores following the @code{membar} is visible to any other
|
processor. This corresponds to @code{membar} mmask field bit 2.
|
processor. This corresponds to @code{membar} mmask field bit 2.
|
|
|
@item
|
@item
|
@samp{#StoreLoad} defines that the effects of all stores appearing
|
@samp{#StoreLoad} defines that the effects of all stores appearing
|
prior to the @code{membar} instruction must be visible to all
|
prior to the @code{membar} instruction must be visible to all
|
processors before loads following the @code{membar} may be performed.
|
processors before loads following the @code{membar} may be performed.
|
This corresponds to @code{membar} mmask field bit 1.
|
This corresponds to @code{membar} mmask field bit 1.
|
|
|
@item
|
@item
|
@samp{#LoadLoad} defines that all loads appearing prior to the
|
@samp{#LoadLoad} defines that all loads appearing prior to the
|
@code{membar} instruction must have been performed before any loads
|
@code{membar} instruction must have been performed before any loads
|
following the @code{membar} may be performed. This corresponds to
|
following the @code{membar} may be performed. This corresponds to
|
@code{membar} mmask field bit 0.
|
@code{membar} mmask field bit 0.
|
|
|
@end itemize
|
@end itemize
|
|
|
These values can be ored together, for example:
|
These values can be ored together, for example:
|
|
|
@example
|
@example
|
membar #Sync
|
membar #Sync
|
membar #StoreLoad | #LoadLoad
|
membar #StoreLoad | #LoadLoad
|
membar #StoreLoad | #StoreStore
|
membar #StoreLoad | #StoreStore
|
@end example
|
@end example
|
|
|
The @code{prefetch} and @code{prefetcha} instructions take a prefetch
|
The @code{prefetch} and @code{prefetcha} instructions take a prefetch
|
function code. The following prefetch function code constant
|
function code. The following prefetch function code constant
|
mnemonics are available:
|
mnemonics are available:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
@samp{#n_reads} requests a prefetch for several reads, and corresponds
|
@samp{#n_reads} requests a prefetch for several reads, and corresponds
|
to a prefetch function code of 0.
|
to a prefetch function code of 0.
|
|
|
@samp{#one_read} requests a prefetch for one read, and corresponds
|
@samp{#one_read} requests a prefetch for one read, and corresponds
|
to a prefetch function code of 1.
|
to a prefetch function code of 1.
|
|
|
@samp{#n_writes} requests a prefetch for several writes (and possibly
|
@samp{#n_writes} requests a prefetch for several writes (and possibly
|
reads), and corresponds to a prefetch function code of 2.
|
reads), and corresponds to a prefetch function code of 2.
|
|
|
@samp{#one_write} requests a prefetch for one write, and corresponds
|
@samp{#one_write} requests a prefetch for one write, and corresponds
|
to a prefetch function code of 3.
|
to a prefetch function code of 3.
|
|
|
@samp{#page} requests a prefetch page, and corresponds to a prefetch
|
@samp{#page} requests a prefetch page, and corresponds to a prefetch
|
function code of 4.
|
function code of 4.
|
|
|
@samp{#invalidate} requests a prefetch invalidate, and corresponds to
|
@samp{#invalidate} requests a prefetch invalidate, and corresponds to
|
a prefetch function code of 16.
|
a prefetch function code of 16.
|
|
|
@samp{#unified} requests a prefetch to the nearest unified cache, and
|
@samp{#unified} requests a prefetch to the nearest unified cache, and
|
corresponds to a prefetch function code of 17.
|
corresponds to a prefetch function code of 17.
|
|
|
@samp{#n_reads_strong} requests a strong prefetch for several reads,
|
@samp{#n_reads_strong} requests a strong prefetch for several reads,
|
and corresponds to a prefetch function code of 20.
|
and corresponds to a prefetch function code of 20.
|
|
|
@samp{#one_read_strong} requests a strong prefetch for one read,
|
@samp{#one_read_strong} requests a strong prefetch for one read,
|
and corresponds to a prefetch function code of 21.
|
and corresponds to a prefetch function code of 21.
|
|
|
@samp{#n_writes_strong} requests a strong prefetch for several writes,
|
@samp{#n_writes_strong} requests a strong prefetch for several writes,
|
and corresponds to a prefetch function code of 22.
|
and corresponds to a prefetch function code of 22.
|
|
|
@samp{#one_write_strong} requests a strong prefetch for one write,
|
@samp{#one_write_strong} requests a strong prefetch for one write,
|
and corresponds to a prefetch function code of 23.
|
and corresponds to a prefetch function code of 23.
|
|
|
Onle one prefetch code may be specified. Here are some examples:
|
Onle one prefetch code may be specified. Here are some examples:
|
|
|
@example
|
@example
|
prefetch [%l0 + %l2], #one_read
|
prefetch [%l0 + %l2], #one_read
|
prefetch [%g2 + 8], #n_writes
|
prefetch [%g2 + 8], #n_writes
|
prefetcha [%g1] 0x8, #unified
|
prefetcha [%g1] 0x8, #unified
|
prefetcha [%o0 + 0x10] %asi, #n_reads
|
prefetcha [%o0 + 0x10] %asi, #n_reads
|
@end example
|
@end example
|
|
|
The actual behavior of a given prefetch function code is processor
|
The actual behavior of a given prefetch function code is processor
|
specific. If a processor does not implement a given prefetch
|
specific. If a processor does not implement a given prefetch
|
function code, it will treat the prefetch instruction as a nop.
|
function code, it will treat the prefetch instruction as a nop.
|
|
|
For instructions that accept an immediate address space identifier,
|
For instructions that accept an immediate address space identifier,
|
@code{@value{AS}} provides many mnemonics corresponding to
|
@code{@value{AS}} provides many mnemonics corresponding to
|
V9 defined as well as UltraSPARC and Niagara extended values.
|
V9 defined as well as UltraSPARC and Niagara extended values.
|
For example, @samp{#ASI_P} and @samp{#ASI_BLK_INIT_QUAD_LDD_AIUS}.
|
For example, @samp{#ASI_P} and @samp{#ASI_BLK_INIT_QUAD_LDD_AIUS}.
|
See the V9 and processor specific manuals for details.
|
See the V9 and processor specific manuals for details.
|
|
|
@end itemize
|
@end itemize
|
|
|
@node Sparc-Relocs
|
@node Sparc-Relocs
|
@subsection Relocations
|
@subsection Relocations
|
@cindex Sparc relocations
|
@cindex Sparc relocations
|
@cindex relocations, Sparc
|
@cindex relocations, Sparc
|
|
|
ELF relocations are available as defined in the 32-bit and 64-bit
|
ELF relocations are available as defined in the 32-bit and 64-bit
|
Sparc ELF specifications.
|
Sparc ELF specifications.
|
|
|
@code{R_SPARC_HI22} is obtained using @samp{%hi} and @code{R_SPARC_LO10}
|
@code{R_SPARC_HI22} is obtained using @samp{%hi} and @code{R_SPARC_LO10}
|
is obtained using @samp{%lo}. Likewise @code{R_SPARC_HIX22} is
|
is obtained using @samp{%lo}. Likewise @code{R_SPARC_HIX22} is
|
obtained from @samp{%hix} and @code{R_SPARC_LOX10} is obtained
|
obtained from @samp{%hix} and @code{R_SPARC_LOX10} is obtained
|
using @samp{%lox}. For example:
|
using @samp{%lox}. For example:
|
|
|
@example
|
@example
|
sethi %hi(symbol), %g1
|
sethi %hi(symbol), %g1
|
or %g1, %lo(symbol), %g1
|
or %g1, %lo(symbol), %g1
|
|
|
sethi %hix(symbol), %g1
|
sethi %hix(symbol), %g1
|
xor %g1, %lox(symbol), %g1
|
xor %g1, %lox(symbol), %g1
|
@end example
|
@end example
|
|
|
These ``high'' mnemonics extract bits 31:10 of their operand,
|
These ``high'' mnemonics extract bits 31:10 of their operand,
|
and the ``low'' mnemonics extract bits 9:0 of their operand.
|
and the ``low'' mnemonics extract bits 9:0 of their operand.
|
|
|
V9 code model relocations can be requested as follows:
|
V9 code model relocations can be requested as follows:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
@code{R_SPARC_HH22} is requested using @samp{%hh}. It can
|
@code{R_SPARC_HH22} is requested using @samp{%hh}. It can
|
also be generated using @samp{%uhi}.
|
also be generated using @samp{%uhi}.
|
@item
|
@item
|
@code{R_SPARC_HM10} is requested using @samp{%hm}. It can
|
@code{R_SPARC_HM10} is requested using @samp{%hm}. It can
|
also be generated using @samp{%ulo}.
|
also be generated using @samp{%ulo}.
|
@item
|
@item
|
@code{R_SPARC_LM22} is requested using @samp{%lm}.
|
@code{R_SPARC_LM22} is requested using @samp{%lm}.
|
|
|
@item
|
@item
|
@code{R_SPARC_H44} is requested using @samp{%h44}.
|
@code{R_SPARC_H44} is requested using @samp{%h44}.
|
@item
|
@item
|
@code{R_SPARC_M44} is requested using @samp{%m44}.
|
@code{R_SPARC_M44} is requested using @samp{%m44}.
|
@item
|
@item
|
@code{R_SPARC_L44} is requested using @samp{%l44}.
|
@code{R_SPARC_L44} is requested using @samp{%l44}.
|
@end itemize
|
@end itemize
|
|
|
The PC relative relocation @code{R_SPARC_PC22} can be obtained by
|
The PC relative relocation @code{R_SPARC_PC22} can be obtained by
|
enclosing an operand inside of @samp{%pc22}. Likewise, the
|
enclosing an operand inside of @samp{%pc22}. Likewise, the
|
@code{R_SPARC_PC10} relocation can be obtained using @samp{%pc10}.
|
@code{R_SPARC_PC10} relocation can be obtained using @samp{%pc10}.
|
These are mostly used when assembling PIC code. For example, the
|
These are mostly used when assembling PIC code. For example, the
|
standard PIC sequence on Sparc to get the base of the global offset
|
standard PIC sequence on Sparc to get the base of the global offset
|
table, PC relative, into a register, can be performed as:
|
table, PC relative, into a register, can be performed as:
|
|
|
@example
|
@example
|
sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %l7
|
sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %l7
|
add %l7, %pc10(_GLOBAL_OFFSET_TABLE_+4), %l7
|
add %l7, %pc10(_GLOBAL_OFFSET_TABLE_+4), %l7
|
@end example
|
@end example
|
|
|
Several relocations exist to allow the link editor to potentially
|
Several relocations exist to allow the link editor to potentially
|
optimize GOT data references. The @code{R_SPARC_GOTDATA_OP_HIX22}
|
optimize GOT data references. The @code{R_SPARC_GOTDATA_OP_HIX22}
|
relocation can obtained by enclosing an operand inside of
|
relocation can obtained by enclosing an operand inside of
|
@samp{%gdop_hix22}. The @code{R_SPARC_GOTDATA_OP_LOX10}
|
@samp{%gdop_hix22}. The @code{R_SPARC_GOTDATA_OP_LOX10}
|
relocation can obtained by enclosing an operand inside of
|
relocation can obtained by enclosing an operand inside of
|
@samp{%gdop_lox10}. Likewise, @code{R_SPARC_GOTDATA_OP} can be
|
@samp{%gdop_lox10}. Likewise, @code{R_SPARC_GOTDATA_OP} can be
|
obtained by enclosing an operand inside of @samp{%gdop}.
|
obtained by enclosing an operand inside of @samp{%gdop}.
|
For example, assuming the GOT base is in register @code{%l7}:
|
For example, assuming the GOT base is in register @code{%l7}:
|
|
|
@example
|
@example
|
sethi %gdop_hix22(symbol), %l1
|
sethi %gdop_hix22(symbol), %l1
|
xor %l1, %gdop_lox10(symbol), %l1
|
xor %l1, %gdop_lox10(symbol), %l1
|
ld [%l7 + %l1], %l2, %gdop(symbol)
|
ld [%l7 + %l1], %l2, %gdop(symbol)
|
@end example
|
@end example
|
|
|
There are many relocations that can be requested for access to
|
There are many relocations that can be requested for access to
|
thread local storage variables. All of the Sparc TLS mnemonics
|
thread local storage variables. All of the Sparc TLS mnemonics
|
are supported:
|
are supported:
|
|
|
@itemize @bullet
|
@itemize @bullet
|
@item
|
@item
|
@code{R_SPARC_TLS_GD_HI22} is requested using @samp{%tgd_hi22}.
|
@code{R_SPARC_TLS_GD_HI22} is requested using @samp{%tgd_hi22}.
|
@item
|
@item
|
@code{R_SPARC_TLS_GD_LO10} is requested using @samp{%tgd_lo10}.
|
@code{R_SPARC_TLS_GD_LO10} is requested using @samp{%tgd_lo10}.
|
@item
|
@item
|
@code{R_SPARC_TLS_GD_ADD} is requested using @samp{%tgd_add}.
|
@code{R_SPARC_TLS_GD_ADD} is requested using @samp{%tgd_add}.
|
@item
|
@item
|
@code{R_SPARC_TLS_GD_CALL} is requested using @samp{%tgd_call}.
|
@code{R_SPARC_TLS_GD_CALL} is requested using @samp{%tgd_call}.
|
|
|
@item
|
@item
|
@code{R_SPARC_TLS_LDM_HI22} is requested using @samp{%tldm_hi22}.
|
@code{R_SPARC_TLS_LDM_HI22} is requested using @samp{%tldm_hi22}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LDM_LO10} is requested using @samp{%tldm_lo10}.
|
@code{R_SPARC_TLS_LDM_LO10} is requested using @samp{%tldm_lo10}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LDM_ADD} is requested using @samp{%tldm_add}.
|
@code{R_SPARC_TLS_LDM_ADD} is requested using @samp{%tldm_add}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LDM_CALL} is requested using @samp{%tldm_call}.
|
@code{R_SPARC_TLS_LDM_CALL} is requested using @samp{%tldm_call}.
|
|
|
@item
|
@item
|
@code{R_SPARC_TLS_LDO_HIX22} is requested using @samp{%tldo_hix22}.
|
@code{R_SPARC_TLS_LDO_HIX22} is requested using @samp{%tldo_hix22}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LDO_LOX10} is requested using @samp{%tldo_lox10}.
|
@code{R_SPARC_TLS_LDO_LOX10} is requested using @samp{%tldo_lox10}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LDO_ADD} is requested using @samp{%tldo_add}.
|
@code{R_SPARC_TLS_LDO_ADD} is requested using @samp{%tldo_add}.
|
|
|
@item
|
@item
|
@code{R_SPARC_TLS_IE_HI22} is requested using @samp{%tie_hi22}.
|
@code{R_SPARC_TLS_IE_HI22} is requested using @samp{%tie_hi22}.
|
@item
|
@item
|
@code{R_SPARC_TLS_IE_LO10} is requested using @samp{%tie_lo10}.
|
@code{R_SPARC_TLS_IE_LO10} is requested using @samp{%tie_lo10}.
|
@item
|
@item
|
@code{R_SPARC_TLS_IE_LD} is requested using @samp{%tie_ld}.
|
@code{R_SPARC_TLS_IE_LD} is requested using @samp{%tie_ld}.
|
@item
|
@item
|
@code{R_SPARC_TLS_IE_LDX} is requested using @samp{%tie_ldx}.
|
@code{R_SPARC_TLS_IE_LDX} is requested using @samp{%tie_ldx}.
|
@item
|
@item
|
@code{R_SPARC_TLS_IE_ADD} is requested using @samp{%tie_add}.
|
@code{R_SPARC_TLS_IE_ADD} is requested using @samp{%tie_add}.
|
|
|
@item
|
@item
|
@code{R_SPARC_TLS_LE_HIX22} is requested using @samp{%tle_hix22}.
|
@code{R_SPARC_TLS_LE_HIX22} is requested using @samp{%tle_hix22}.
|
@item
|
@item
|
@code{R_SPARC_TLS_LE_LOX10} is requested using @samp{%tle_lox10}.
|
@code{R_SPARC_TLS_LE_LOX10} is requested using @samp{%tle_lox10}.
|
@end itemize
|
@end itemize
|
|
|
Here are some example TLS model sequences.
|
Here are some example TLS model sequences.
|
|
|
First, General Dynamic:
|
First, General Dynamic:
|
|
|
@example
|
@example
|
sethi %tgd_hi22(symbol), %l1
|
sethi %tgd_hi22(symbol), %l1
|
add %l1, %tgd_lo10(symbol), %l1
|
add %l1, %tgd_lo10(symbol), %l1
|
add %l7, %l1, %o0, %tgd_add(symbol)
|
add %l7, %l1, %o0, %tgd_add(symbol)
|
call __tls_get_addr, %tgd_call(symbol)
|
call __tls_get_addr, %tgd_call(symbol)
|
nop
|
nop
|
@end example
|
@end example
|
|
|
Local Dynamic:
|
Local Dynamic:
|
|
|
@example
|
@example
|
sethi %tldm_hi22(symbol), %l1
|
sethi %tldm_hi22(symbol), %l1
|
add %l1, %tldm_lo10(symbol), %l1
|
add %l1, %tldm_lo10(symbol), %l1
|
add %l7, %l1, %o0, %tldm_add(symbol)
|
add %l7, %l1, %o0, %tldm_add(symbol)
|
call __tls_get_addr, %tldm_call(symbol)
|
call __tls_get_addr, %tldm_call(symbol)
|
nop
|
nop
|
|
|
sethi %tldo_hix22(symbol), %l1
|
sethi %tldo_hix22(symbol), %l1
|
xor %l1, %tldo_lox10(symbol), %l1
|
xor %l1, %tldo_lox10(symbol), %l1
|
add %o0, %l1, %l1, %tldo_add(symbol)
|
add %o0, %l1, %l1, %tldo_add(symbol)
|
@end example
|
@end example
|
|
|
Initial Exec:
|
Initial Exec:
|
|
|
@example
|
@example
|
sethi %tie_hi22(symbol), %l1
|
sethi %tie_hi22(symbol), %l1
|
add %l1, %tie_lo10(symbol), %l1
|
add %l1, %tie_lo10(symbol), %l1
|
ld [%l7 + %l1], %o0, %tie_ld(symbol)
|
ld [%l7 + %l1], %o0, %tie_ld(symbol)
|
add %g7, %o0, %o0, %tie_add(symbol)
|
add %g7, %o0, %o0, %tie_add(symbol)
|
|
|
sethi %tie_hi22(symbol), %l1
|
sethi %tie_hi22(symbol), %l1
|
add %l1, %tie_lo10(symbol), %l1
|
add %l1, %tie_lo10(symbol), %l1
|
ldx [%l7 + %l1], %o0, %tie_ldx(symbol)
|
ldx [%l7 + %l1], %o0, %tie_ldx(symbol)
|
add %g7, %o0, %o0, %tie_add(symbol)
|
add %g7, %o0, %o0, %tie_add(symbol)
|
@end example
|
@end example
|
|
|
And finally, Local Exec:
|
And finally, Local Exec:
|
|
|
@example
|
@example
|
sethi %tle_hix22(symbol), %l1
|
sethi %tle_hix22(symbol), %l1
|
add %l1, %tle_lox10(symbol), %l1
|
add %l1, %tle_lox10(symbol), %l1
|
add %g7, %l1, %l1
|
add %g7, %l1, %l1
|
@end example
|
@end example
|
|
|
When assembling for 64-bit, and a secondary constant addend is
|
When assembling for 64-bit, and a secondary constant addend is
|
specified in an address expression that would normally generate
|
specified in an address expression that would normally generate
|
an @code{R_SPARC_LO10} relocation, the assembler will emit an
|
an @code{R_SPARC_LO10} relocation, the assembler will emit an
|
@code{R_SPARC_OLO10} instead.
|
@code{R_SPARC_OLO10} instead.
|
|
|
@node Sparc-Size-Translations
|
@node Sparc-Size-Translations
|
@subsection Size Translations
|
@subsection Size Translations
|
@cindex Sparc size translations
|
@cindex Sparc size translations
|
@cindex size, translations, Sparc
|
@cindex size, translations, Sparc
|
|
|
Often it is desirable to write code in an operand size agnostic
|
Often it is desirable to write code in an operand size agnostic
|
manner. @code{@value{AS}} provides support for this via
|
manner. @code{@value{AS}} provides support for this via
|
operand size opcode translations. Translations are supported
|
operand size opcode translations. Translations are supported
|
for loads, stores, shifts, compare-and-swap atomics, and the
|
for loads, stores, shifts, compare-and-swap atomics, and the
|
@samp{clr} synthetic instruction.
|
@samp{clr} synthetic instruction.
|
|
|
If generating 32-bit code, @code{@value{AS}} will generate the
|
If generating 32-bit code, @code{@value{AS}} will generate the
|
32-bit opcode. Whereas if 64-bit code is being generated,
|
32-bit opcode. Whereas if 64-bit code is being generated,
|
the 64-bit opcode will be emitted. For example @code{ldn}
|
the 64-bit opcode will be emitted. For example @code{ldn}
|
will be transformed into @code{ld} for 32-bit code and
|
will be transformed into @code{ld} for 32-bit code and
|
@code{ldx} for 64-bit code.
|
@code{ldx} for 64-bit code.
|
|
|
Here is an example meant to demonstrate all the supported
|
Here is an example meant to demonstrate all the supported
|
opcode translations:
|
opcode translations:
|
|
|
@example
|
@example
|
ldn [%o0], %o1
|
ldn [%o0], %o1
|
ldna [%o0] %asi, %o2
|
ldna [%o0] %asi, %o2
|
stn %o1, [%o0]
|
stn %o1, [%o0]
|
stna %o2, [%o0] %asi
|
stna %o2, [%o0] %asi
|
slln %o3, 3, %o3
|
slln %o3, 3, %o3
|
srln %o4, 8, %o4
|
srln %o4, 8, %o4
|
sran %o5, 12, %o5
|
sran %o5, 12, %o5
|
casn [%o0], %o1, %o2
|
casn [%o0], %o1, %o2
|
casna [%o0] %asi, %o1, %o2
|
casna [%o0] %asi, %o1, %o2
|
clrn %g1
|
clrn %g1
|
@end example
|
@end example
|
|
|
In 32-bit mode @code{@value{AS}} will emit:
|
In 32-bit mode @code{@value{AS}} will emit:
|
|
|
@example
|
@example
|
ld [%o0], %o1
|
ld [%o0], %o1
|
lda [%o0] %asi, %o2
|
lda [%o0] %asi, %o2
|
st %o1, [%o0]
|
st %o1, [%o0]
|
sta %o2, [%o0] %asi
|
sta %o2, [%o0] %asi
|
sll %o3, 3, %o3
|
sll %o3, 3, %o3
|
srl %o4, 8, %o4
|
srl %o4, 8, %o4
|
sra %o5, 12, %o5
|
sra %o5, 12, %o5
|
cas [%o0], %o1, %o2
|
cas [%o0], %o1, %o2
|
casa [%o0] %asi, %o1, %o2
|
casa [%o0] %asi, %o1, %o2
|
clr %g1
|
clr %g1
|
@end example
|
@end example
|
|
|
And in 64-bit mode @code{@value{AS}} will emit:
|
And in 64-bit mode @code{@value{AS}} will emit:
|
|
|
@example
|
@example
|
ldx [%o0], %o1
|
ldx [%o0], %o1
|
ldxa [%o0] %asi, %o2
|
ldxa [%o0] %asi, %o2
|
stx %o1, [%o0]
|
stx %o1, [%o0]
|
stxa %o2, [%o0] %asi
|
stxa %o2, [%o0] %asi
|
sllx %o3, 3, %o3
|
sllx %o3, 3, %o3
|
srlx %o4, 8, %o4
|
srlx %o4, 8, %o4
|
srax %o5, 12, %o5
|
srax %o5, 12, %o5
|
casx [%o0], %o1, %o2
|
casx [%o0], %o1, %o2
|
casxa [%o0] %asi, %o1, %o2
|
casxa [%o0] %asi, %o1, %o2
|
clrx %g1
|
clrx %g1
|
@end example
|
@end example
|
|
|
Finally, the @samp{.nword} translating directive is supported
|
Finally, the @samp{.nword} translating directive is supported
|
as well. It is documented in the section on Sparc machine
|
as well. It is documented in the section on Sparc machine
|
directives.
|
directives.
|
|
|
@node Sparc-Float
|
@node Sparc-Float
|
@section Floating Point
|
@section Floating Point
|
|
|
@cindex floating point, SPARC (@sc{ieee})
|
@cindex floating point, SPARC (@sc{ieee})
|
@cindex SPARC floating point (@sc{ieee})
|
@cindex SPARC floating point (@sc{ieee})
|
The Sparc uses @sc{ieee} floating-point numbers.
|
The Sparc uses @sc{ieee} floating-point numbers.
|
|
|
@node Sparc-Directives
|
@node Sparc-Directives
|
@section Sparc Machine Directives
|
@section Sparc Machine Directives
|
|
|
@cindex SPARC machine directives
|
@cindex SPARC machine directives
|
@cindex machine directives, SPARC
|
@cindex machine directives, SPARC
|
The Sparc version of @code{@value{AS}} supports the following additional
|
The Sparc version of @code{@value{AS}} supports the following additional
|
machine directives:
|
machine directives:
|
|
|
@table @code
|
@table @code
|
@cindex @code{align} directive, SPARC
|
@cindex @code{align} directive, SPARC
|
@item .align
|
@item .align
|
This must be followed by the desired alignment in bytes.
|
This must be followed by the desired alignment in bytes.
|
|
|
@cindex @code{common} directive, SPARC
|
@cindex @code{common} directive, SPARC
|
@item .common
|
@item .common
|
This must be followed by a symbol name, a positive number, and
|
This must be followed by a symbol name, a positive number, and
|
@code{"bss"}. This behaves somewhat like @code{.comm}, but the
|
@code{"bss"}. This behaves somewhat like @code{.comm}, but the
|
syntax is different.
|
syntax is different.
|
|
|
@cindex @code{half} directive, SPARC
|
@cindex @code{half} directive, SPARC
|
@item .half
|
@item .half
|
This is functionally identical to @code{.short}.
|
This is functionally identical to @code{.short}.
|
|
|
@cindex @code{nword} directive, SPARC
|
@cindex @code{nword} directive, SPARC
|
@item .nword
|
@item .nword
|
On the Sparc, the @code{.nword} directive produces native word sized value,
|
On the Sparc, the @code{.nword} directive produces native word sized value,
|
ie. if assembling with -32 it is equivalent to @code{.word}, if assembling
|
ie. if assembling with -32 it is equivalent to @code{.word}, if assembling
|
with -64 it is equivalent to @code{.xword}.
|
with -64 it is equivalent to @code{.xword}.
|
|
|
@cindex @code{proc} directive, SPARC
|
@cindex @code{proc} directive, SPARC
|
@item .proc
|
@item .proc
|
This directive is ignored. Any text following it on the same
|
This directive is ignored. Any text following it on the same
|
line is also ignored.
|
line is also ignored.
|
|
|
@cindex @code{register} directive, SPARC
|
@cindex @code{register} directive, SPARC
|
@item .register
|
@item .register
|
This directive declares use of a global application or system register.
|
This directive declares use of a global application or system register.
|
It must be followed by a register name %g2, %g3, %g6 or %g7, comma and
|
It must be followed by a register name %g2, %g3, %g6 or %g7, comma and
|
the symbol name for that register. If symbol name is @code{#scratch},
|
the symbol name for that register. If symbol name is @code{#scratch},
|
it is a scratch register, if it is @code{#ignore}, it just suppresses any
|
it is a scratch register, if it is @code{#ignore}, it just suppresses any
|
errors about using undeclared global register, but does not emit any
|
errors about using undeclared global register, but does not emit any
|
information about it into the object file. This can be useful e.g. if you
|
information about it into the object file. This can be useful e.g. if you
|
save the register before use and restore it after.
|
save the register before use and restore it after.
|
|
|
@cindex @code{reserve} directive, SPARC
|
@cindex @code{reserve} directive, SPARC
|
@item .reserve
|
@item .reserve
|
This must be followed by a symbol name, a positive number, and
|
This must be followed by a symbol name, a positive number, and
|
@code{"bss"}. This behaves somewhat like @code{.lcomm}, but the
|
@code{"bss"}. This behaves somewhat like @code{.lcomm}, but the
|
syntax is different.
|
syntax is different.
|
|
|
@cindex @code{seg} directive, SPARC
|
@cindex @code{seg} directive, SPARC
|
@item .seg
|
@item .seg
|
This must be followed by @code{"text"}, @code{"data"}, or
|
This must be followed by @code{"text"}, @code{"data"}, or
|
@code{"data1"}. It behaves like @code{.text}, @code{.data}, or
|
@code{"data1"}. It behaves like @code{.text}, @code{.data}, or
|
@code{.data 1}.
|
@code{.data 1}.
|
|
|
@cindex @code{skip} directive, SPARC
|
@cindex @code{skip} directive, SPARC
|
@item .skip
|
@item .skip
|
This is functionally identical to the @code{.space} directive.
|
This is functionally identical to the @code{.space} directive.
|
|
|
@cindex @code{word} directive, SPARC
|
@cindex @code{word} directive, SPARC
|
@item .word
|
@item .word
|
On the Sparc, the @code{.word} directive produces 32 bit values,
|
On the Sparc, the @code{.word} directive produces 32 bit values,
|
instead of the 16 bit values it produces on many other machines.
|
instead of the 16 bit values it produces on many other machines.
|
|
|
@cindex @code{xword} directive, SPARC
|
@cindex @code{xword} directive, SPARC
|
@item .xword
|
@item .xword
|
On the Sparc V9 processor, the @code{.xword} directive produces
|
On the Sparc V9 processor, the @code{.xword} directive produces
|
64 bit values.
|
64 bit values.
|
@end table
|
@end table
|
|
|
