/* sprs.c -- Simulation of OR1K special-purpose registers
|
/* sprs.c -- Simulation of OR1K special-purpose registers
|
|
|
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
|
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
|
Copyright (C) 2008 Embecosm Limited
|
Copyright (C) 2008 Embecosm Limited
|
|
|
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
|
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
|
|
|
This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
|
This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
|
|
|
This program is free software; you can redistribute it and/or modify it
|
This program is free software; you can redistribute it and/or modify it
|
under the terms of the GNU General Public License as published by the Free
|
under the terms of the GNU General Public License as published by the Free
|
Software Foundation; either version 3 of the License, or (at your option)
|
Software Foundation; either version 3 of the License, or (at your option)
|
any later version.
|
any later version.
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
more details.
|
more details.
|
|
|
You should have received a copy of the GNU General Public License along
|
You should have received a copy of the GNU General Public License along
|
with this program. If not, see <http://www.gnu.org/licenses/>. */
|
with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
/* This program is commented throughout in a fashion suitable for processing
|
/* This program is commented throughout in a fashion suitable for processing
|
with Doxygen. */
|
with Doxygen. */
|
|
|
|
|
/* Autoconf and/or portability configuration */
|
/* Autoconf and/or portability configuration */
|
#include "config.h"
|
#include "config.h"
|
#include "port.h"
|
#include "port.h"
|
|
|
/* System includes */
|
/* System includes */
|
#include <stdlib.h>
|
#include <stdlib.h>
|
#include <stdio.h>
|
#include <stdio.h>
|
#include <errno.h>
|
#include <errno.h>
|
|
|
/* Package includes */
|
/* Package includes */
|
#include "sprs.h"
|
#include "sprs.h"
|
#include "sim-config.h"
|
#include "sim-config.h"
|
#include "debug.h"
|
#include "debug.h"
|
#include "execute.h"
|
#include "execute.h"
|
#include "spr-defs.h"
|
#include "spr-defs.h"
|
#include "tick.h"
|
#include "tick.h"
|
#include "dcache-model.h"
|
#include "dcache-model.h"
|
#include "icache-model.h"
|
#include "icache-model.h"
|
#include "dmmu.h"
|
#include "dmmu.h"
|
#include "immu.h"
|
#include "immu.h"
|
#include "toplevel-support.h"
|
#include "toplevel-support.h"
|
#include "pic.h"
|
#include "pic.h"
|
|
|
|
|
DECLARE_DEBUG_CHANNEL(immu);
|
DECLARE_DEBUG_CHANNEL(immu);
|
|
|
/* Set a specific SPR with a value. */
|
/* Set a specific SPR with a value. */
|
void mtspr(uint16_t regno, const uorreg_t value)
|
void mtspr(uint16_t regno, const uorreg_t value)
|
{
|
{
|
uorreg_t prev_val;
|
uorreg_t prev_val;
|
|
|
prev_val = cpu_state.sprs[regno];
|
prev_val = cpu_state.sprs[regno];
|
cpu_state.sprs[regno] = value;
|
cpu_state.sprs[regno] = value;
|
|
|
/* MM: Register hooks. */
|
/* MM: Register hooks. */
|
switch (regno) {
|
switch (regno) {
|
case SPR_TTCR:
|
case SPR_TTCR:
|
spr_write_ttcr (value);
|
spr_write_ttcr (value);
|
break;
|
break;
|
case SPR_TTMR:
|
case SPR_TTMR:
|
spr_write_ttmr (prev_val);
|
spr_write_ttmr (prev_val);
|
break;
|
break;
|
/* Data cache simulateing stuff */
|
/* Data cache simulateing stuff */
|
case SPR_DCBPR:
|
case SPR_DCBPR:
|
/* FIXME: This is not correct. The arch. manual states: "Memory accesses
|
/* FIXME: This is not correct. The arch. manual states: "Memory accesses
|
* are not recorded (Unlike load or store instructions) and cannot invoke
|
* are not recorded (Unlike load or store instructions) and cannot invoke
|
* any exception". If the physical address is invalid a bus error will be
|
* any exception". If the physical address is invalid a bus error will be
|
* generated. Also if the effective address is not resident in the mmu
|
* generated. Also if the effective address is not resident in the mmu
|
* the read will happen from address 0, which is naturally not correct. */
|
* the read will happen from address 0, which is naturally not correct. */
|
dc_simulate_read(peek_into_dtlb(value, 0, 1), value, 4);
|
dc_simulate_read(peek_into_dtlb(value, 0, 1), value, 4);
|
cpu_state.sprs[SPR_DCBPR] = 0;
|
cpu_state.sprs[SPR_DCBPR] = 0;
|
break;
|
break;
|
case SPR_DCBFR:
|
case SPR_DCBFR:
|
dc_inv(value);
|
dc_inv(value);
|
cpu_state.sprs[SPR_DCBFR] = -1;
|
cpu_state.sprs[SPR_DCBFR] = -1;
|
break;
|
break;
|
case SPR_DCBIR:
|
case SPR_DCBIR:
|
dc_inv(value);
|
dc_inv(value);
|
cpu_state.sprs[SPR_DCBIR] = 0;
|
cpu_state.sprs[SPR_DCBIR] = 0;
|
break;
|
break;
|
case SPR_DCBWR:
|
case SPR_DCBWR:
|
cpu_state.sprs[SPR_DCBWR] = 0;
|
cpu_state.sprs[SPR_DCBWR] = 0;
|
break;
|
break;
|
case SPR_DCBLR:
|
case SPR_DCBLR:
|
cpu_state.sprs[SPR_DCBLR] = 0;
|
cpu_state.sprs[SPR_DCBLR] = 0;
|
break;
|
break;
|
/* Instruction cache simulateing stuff */
|
/* Instruction cache simulateing stuff */
|
case SPR_ICBPR:
|
case SPR_ICBPR:
|
/* FIXME: The arch manual does not say what happens when an invalid memory
|
/* FIXME: The arch manual does not say what happens when an invalid memory
|
* location is specified. I guess the same as for the DCBPR register */
|
* location is specified. I guess the same as for the DCBPR register */
|
ic_simulate_fetch(peek_into_itlb(value), value);
|
ic_simulate_fetch(peek_into_itlb(value), value);
|
cpu_state.sprs[SPR_ICBPR] = 0;
|
cpu_state.sprs[SPR_ICBPR] = 0;
|
break;
|
break;
|
case SPR_ICBIR:
|
case SPR_ICBIR:
|
ic_inv(value);
|
ic_inv(value);
|
cpu_state.sprs[SPR_ICBIR] = 0;
|
cpu_state.sprs[SPR_ICBIR] = 0;
|
break;
|
break;
|
case SPR_ICBLR:
|
case SPR_ICBLR:
|
cpu_state.sprs[SPR_ICBLR] = 0;
|
cpu_state.sprs[SPR_ICBLR] = 0;
|
break;
|
break;
|
case SPR_SR:
|
case SPR_SR:
|
cpu_state.sprs[regno] |= SPR_SR_FO;
|
cpu_state.sprs[regno] |= SPR_SR_FO;
|
if((value & SPR_SR_IEE) && !(prev_val & SPR_SR_IEE))
|
if((value & SPR_SR_IEE) && !(prev_val & SPR_SR_IEE))
|
pic_ints_en();
|
pic_ints_en();
|
#if DYNAMIC_EXECUTION
|
|
if((value & SPR_SR_IME) && !(prev_val & SPR_SR_IME)) {
|
|
TRACE_(immu)("IMMU just became enabled (%lli).\n", runtime.sim.cycles);
|
|
recheck_immu(IMMU_GOT_ENABLED);
|
|
} else if(!(value & SPR_SR_IME) && (prev_val & SPR_SR_IME)) {
|
|
TRACE_(immu)("Remove counting of mmu hit delay with cycles (%lli)\n",
|
|
runtime.sim.cycles);
|
|
recheck_immu(IMMU_GOT_DISABLED);
|
|
}
|
|
#endif
|
|
break;
|
break;
|
case SPR_NPC:
|
case SPR_NPC:
|
{
|
{
|
/* The debugger has redirected us to a new address */
|
/* The debugger has redirected us to a new address */
|
/* This is usually done to reissue an instruction
|
/* This is usually done to reissue an instruction
|
which just caused a breakpoint exception. */
|
which just caused a breakpoint exception. */
|
|
|
/* JPB patch. When GDB stepi, this may be used to set the PC to the
|
/* JPB patch. When GDB stepi, this may be used to set the PC to the
|
value it is already at. If this is the case, then we do nothing (in
|
value it is already at. If this is the case, then we do nothing (in
|
particular we do not trash a delayed branch) */
|
particular we do not trash a delayed branch) */
|
|
|
if (value != cpu_state.pc)
|
if (value != cpu_state.pc)
|
{
|
{
|
cpu_state.pc = value;
|
cpu_state.pc = value;
|
|
|
if(!value && config.sim.verbose)
|
if(!value && config.sim.verbose)
|
PRINTF("WARNING: PC just set to 0!\n");
|
PRINTF("WARNING: PC just set to 0!\n");
|
|
|
/* Clear any pending delay slot jumps also */
|
/* Clear any pending delay slot jumps also */
|
cpu_state.delay_insn = 0;
|
cpu_state.delay_insn = 0;
|
pcnext = value + 4;
|
pcnext = value + 4;
|
|
|
/* Further JPB patch. If the processor is stalled, then subsequent
|
/* Further JPB patch. If the processor is stalled, then subsequent
|
reads of the NPC should return 0 until the processor is
|
reads of the NPC should return 0 until the processor is
|
unstalled. If the processor is stalled, note that the NPC has
|
unstalled. If the processor is stalled, note that the NPC has
|
been updated while the processor was stalled. */
|
been updated while the processor was stalled. */
|
|
|
if (runtime.cpu.stalled)
|
if (runtime.cpu.stalled)
|
{
|
{
|
cpu_state.npc_not_valid = 1;
|
cpu_state.npc_not_valid = 1;
|
}
|
}
|
}
|
}
|
}
|
}
|
break;
|
break;
|
case SPR_PICSR:
|
case SPR_PICSR:
|
if(!config.pic.edge_trigger)
|
if(!config.pic.edge_trigger)
|
/* When configured with level triggered interrupts we clear PICSR in PIC
|
/* When configured with level triggered interrupts we clear PICSR in PIC
|
peripheral model when incoming IRQ goes low */
|
peripheral model when incoming IRQ goes low */
|
cpu_state.sprs[SPR_PICSR] = prev_val;
|
cpu_state.sprs[SPR_PICSR] = prev_val;
|
break;
|
break;
|
case SPR_PICMR:
|
case SPR_PICMR:
|
/* If we have non-maskable interrupts, then the bottom two bits are always
|
/* If we have non-maskable interrupts, then the bottom two bits are always
|
one. */
|
one. */
|
if (config.pic.use_nmi)
|
if (config.pic.use_nmi)
|
{
|
{
|
cpu_state.sprs[SPR_PICMR] |= 0x00000003;
|
cpu_state.sprs[SPR_PICMR] |= 0x00000003;
|
}
|
}
|
|
|
if(cpu_state.sprs[SPR_SR] & SPR_SR_IEE)
|
if(cpu_state.sprs[SPR_SR] & SPR_SR_IEE)
|
pic_ints_en();
|
pic_ints_en();
|
break;
|
break;
|
case SPR_PMR:
|
case SPR_PMR:
|
/* PMR[SDF] and PMR[DCGE] are ignored completely. */
|
/* PMR[SDF] and PMR[DCGE] are ignored completely. */
|
if (config.pm.enabled && (value & SPR_PMR_SUME)) {
|
if (config.pm.enabled && (value & SPR_PMR_SUME)) {
|
PRINTF ("SUSPEND: PMR[SUME] bit was set.\n");
|
PRINTF ("SUSPEND: PMR[SUME] bit was set.\n");
|
sim_done();
|
sim_done();
|
}
|
}
|
break;
|
break;
|
default:
|
default:
|
/* Mask reserved bits in DTLBMR and DTLBMR registers */
|
/* Mask reserved bits in DTLBMR and DTLBMR registers */
|
if ( (regno >= SPR_DTLBMR_BASE(0)) && (regno < SPR_DTLBTR_LAST(3))) {
|
if ( (regno >= SPR_DTLBMR_BASE(0)) && (regno < SPR_DTLBTR_LAST(3))) {
|
if((regno & 0xff) < 0x80)
|
if((regno & 0xff) < 0x80)
|
cpu_state.sprs[regno] = DADDR_PAGE(value) |
|
cpu_state.sprs[regno] = DADDR_PAGE(value) |
|
(value & (SPR_DTLBMR_V | SPR_DTLBMR_PL1 | SPR_DTLBMR_CID | SPR_DTLBMR_LRU));
|
(value & (SPR_DTLBMR_V | SPR_DTLBMR_PL1 | SPR_DTLBMR_CID | SPR_DTLBMR_LRU));
|
else
|
else
|
cpu_state.sprs[regno] = DADDR_PAGE(value) |
|
cpu_state.sprs[regno] = DADDR_PAGE(value) |
|
(value & (SPR_DTLBTR_CC | SPR_DTLBTR_CI | SPR_DTLBTR_WBC | SPR_DTLBTR_WOM |
|
(value & (SPR_DTLBTR_CC | SPR_DTLBTR_CI | SPR_DTLBTR_WBC | SPR_DTLBTR_WOM |
|
SPR_DTLBTR_A | SPR_DTLBTR_D | SPR_DTLBTR_URE | SPR_DTLBTR_UWE | SPR_DTLBTR_SRE |
|
SPR_DTLBTR_A | SPR_DTLBTR_D | SPR_DTLBTR_URE | SPR_DTLBTR_UWE | SPR_DTLBTR_SRE |
|
SPR_DTLBTR_SWE));
|
SPR_DTLBTR_SWE));
|
}
|
}
|
|
|
/* Mask reseved bits in ITLBMR and ITLBMR registers */
|
/* Mask reseved bits in ITLBMR and ITLBMR registers */
|
if ( (regno >= SPR_ITLBMR_BASE(0)) && (regno < SPR_ITLBTR_LAST(3))) {
|
if ( (regno >= SPR_ITLBMR_BASE(0)) && (regno < SPR_ITLBTR_LAST(3))) {
|
if((regno & 0xff) < 0x80)
|
if((regno & 0xff) < 0x80)
|
cpu_state.sprs[regno] = IADDR_PAGE(value) |
|
cpu_state.sprs[regno] = IADDR_PAGE(value) |
|
(value & (SPR_ITLBMR_V | SPR_ITLBMR_PL1 | SPR_ITLBMR_CID | SPR_ITLBMR_LRU));
|
(value & (SPR_ITLBMR_V | SPR_ITLBMR_PL1 | SPR_ITLBMR_CID | SPR_ITLBMR_LRU));
|
else
|
else
|
cpu_state.sprs[regno] = IADDR_PAGE(value) |
|
cpu_state.sprs[regno] = IADDR_PAGE(value) |
|
(value & (SPR_ITLBTR_CC | SPR_ITLBTR_CI | SPR_ITLBTR_WBC | SPR_ITLBTR_WOM |
|
(value & (SPR_ITLBTR_CC | SPR_ITLBTR_CI | SPR_ITLBTR_WBC | SPR_ITLBTR_WOM |
|
SPR_ITLBTR_A | SPR_ITLBTR_D | SPR_ITLBTR_SXE | SPR_ITLBTR_UXE));
|
SPR_ITLBTR_A | SPR_ITLBTR_D | SPR_ITLBTR_SXE | SPR_ITLBTR_UXE));
|
|
|
#if DYNAMIC_EXECUTION
|
|
if(cpu_state.sprs[SPR_SR] & SPR_SR_IME) {
|
|
/* The immu got reconfigured. Recheck if the current page in execution
|
|
* is resident in the immu ways. This check would be done during the
|
|
* instruction fetch but since the dynamic execution model does not do
|
|
* instruction fetchs, do it now. */
|
|
recheck_immu(0);
|
|
}
|
|
#endif
|
|
}
|
}
|
|
|
/* Links to GPRS */
|
/* Links to GPRS */
|
if(regno >= 0x0400 && regno < 0x0420) {
|
if(regno >= 0x0400 && regno < 0x0420) {
|
cpu_state.reg[regno - 0x0400] = value;
|
cpu_state.reg[regno - 0x0400] = value;
|
}
|
}
|
break;
|
break;
|
}
|
}
|
}
|
}
|
|
|
/* Get a specific SPR. */
|
/* Get a specific SPR. */
|
uorreg_t mfspr(const uint16_t regno)
|
uorreg_t mfspr(const uint16_t regno)
|
{
|
{
|
uorreg_t ret;
|
uorreg_t ret;
|
|
|
ret = cpu_state.sprs[regno];
|
ret = cpu_state.sprs[regno];
|
|
|
switch (regno) {
|
switch (regno) {
|
case SPR_NPC:
|
case SPR_NPC:
|
|
|
/* The NPC is the program counter UNLESS the NPC has been changed and we
|
/* The NPC is the program counter UNLESS the NPC has been changed and we
|
are stalled, which will have flushed the pipeline, so the value is
|
are stalled, which will have flushed the pipeline, so the value is
|
zero. Currently this is optional behavior, since it breaks GDB.
|
zero. Currently this is optional behavior, since it breaks GDB.
|
*/
|
*/
|
|
|
if (config.sim.strict_npc && cpu_state.npc_not_valid)
|
if (config.sim.strict_npc && cpu_state.npc_not_valid)
|
{
|
{
|
ret = 0;
|
ret = 0;
|
}
|
}
|
else
|
else
|
{
|
{
|
ret = cpu_state.pc;
|
ret = cpu_state.pc;
|
}
|
}
|
break;
|
break;
|
|
|
case SPR_TTCR:
|
case SPR_TTCR:
|
ret = spr_read_ttcr();
|
ret = spr_read_ttcr();
|
break;
|
break;
|
case SPR_FPCSR:
|
case SPR_FPCSR:
|
// If hard floating point is disabled - return 0
|
// If hard floating point is disabled - return 0
|
if (!config.cpu.hardfloat)
|
if (!config.cpu.hardfloat)
|
ret = 0;
|
ret = 0;
|
break;
|
break;
|
default:
|
default:
|
/* Links to GPRS */
|
/* Links to GPRS */
|
if(regno >= 0x0400 && regno < 0x0420)
|
if(regno >= 0x0400 && regno < 0x0420)
|
ret = cpu_state.reg[regno - 0x0400];
|
ret = cpu_state.reg[regno - 0x0400];
|
}
|
}
|
|
|
return ret;
|
return ret;
|
}
|
}
|
|
|
/* Show status of important SPRs. */
|
/* Show status of important SPRs. */
|
void sprs_status(void)
|
void sprs_status(void)
|
{
|
{
|
PRINTF("VR : 0x%"PRIxREG" UPR : 0x%"PRIxREG"\n", cpu_state.sprs[SPR_VR],
|
PRINTF("VR : 0x%"PRIxREG" UPR : 0x%"PRIxREG"\n", cpu_state.sprs[SPR_VR],
|
cpu_state.sprs[SPR_UPR]);
|
cpu_state.sprs[SPR_UPR]);
|
PRINTF("SR : 0x%"PRIxREG"\n", cpu_state.sprs[SPR_SR]);
|
PRINTF("SR : 0x%"PRIxREG"\n", cpu_state.sprs[SPR_SR]);
|
PRINTF("MACLO: 0x%"PRIxREG" MACHI: 0x%"PRIxREG"\n",
|
PRINTF("MACLO: 0x%"PRIxREG" MACHI: 0x%"PRIxREG"\n",
|
cpu_state.sprs[SPR_MACLO], cpu_state.sprs[SPR_MACHI]);
|
cpu_state.sprs[SPR_MACLO], cpu_state.sprs[SPR_MACHI]);
|
PRINTF("EPCR0: 0x%"PRIxADDR" EPCR1: 0x%"PRIxADDR"\n",
|
PRINTF("EPCR0: 0x%"PRIxADDR" EPCR1: 0x%"PRIxADDR"\n",
|
cpu_state.sprs[SPR_EPCR_BASE], cpu_state.sprs[SPR_EPCR_BASE+1]);
|
cpu_state.sprs[SPR_EPCR_BASE], cpu_state.sprs[SPR_EPCR_BASE+1]);
|
PRINTF("EEAR0: 0x%"PRIxADDR" EEAR1: 0x%"PRIxADDR"\n",
|
PRINTF("EEAR0: 0x%"PRIxADDR" EEAR1: 0x%"PRIxADDR"\n",
|
cpu_state.sprs[SPR_EEAR_BASE], cpu_state.sprs[SPR_EEAR_BASE+1]);
|
cpu_state.sprs[SPR_EEAR_BASE], cpu_state.sprs[SPR_EEAR_BASE+1]);
|
PRINTF("ESR0 : 0x%"PRIxREG" ESR1 : 0x%"PRIxREG"\n",
|
PRINTF("ESR0 : 0x%"PRIxREG" ESR1 : 0x%"PRIxREG"\n",
|
cpu_state.sprs[SPR_ESR_BASE], cpu_state.sprs[SPR_ESR_BASE+1]);
|
cpu_state.sprs[SPR_ESR_BASE], cpu_state.sprs[SPR_ESR_BASE+1]);
|
PRINTF("TTMR : 0x%"PRIxREG" TTCR : 0x%"PRIxREG"\n",
|
PRINTF("TTMR : 0x%"PRIxREG" TTCR : 0x%"PRIxREG"\n",
|
cpu_state.sprs[SPR_TTMR], cpu_state.sprs[SPR_TTCR]);
|
cpu_state.sprs[SPR_TTMR], cpu_state.sprs[SPR_TTCR]);
|
PRINTF("PICMR: 0x%"PRIxREG" PICSR: 0x%"PRIxREG"\n",
|
PRINTF("PICMR: 0x%"PRIxREG" PICSR: 0x%"PRIxREG"\n",
|
cpu_state.sprs[SPR_PICMR], cpu_state.sprs[SPR_PICSR]);
|
cpu_state.sprs[SPR_PICMR], cpu_state.sprs[SPR_PICSR]);
|
PRINTF("PPC: 0x%"PRIxADDR" NPC : 0x%"PRIxADDR"\n",
|
PRINTF("PPC: 0x%"PRIxADDR" NPC : 0x%"PRIxADDR"\n",
|
cpu_state.sprs[SPR_PPC], cpu_state.sprs[SPR_NPC]);
|
cpu_state.sprs[SPR_PPC], cpu_state.sprs[SPR_NPC]);
|
}
|
}
|
|
|
