Subversion Repositories openrisc

#if HAVE_ETH_PHY

#include <netpacket/packet.h>

#endif /* HAVE_ETH_PHY */

#if HAVE_NET_ETHERNET_H

# include <net/ethernet.h>

#elif defined(HAVE_SYS_ETHERNET_H)

# include <sys/ethernet.h>

#else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */

#include <sys/types.h>

#endif

/* Address space required by one Ethernet MAC */

#define ETH_ADDR_SPACE 0x1000

/* Relative Register Addresses */

#define ETH_MODER       (4 * 0x00)

#define ETH_INT_SOURCE  (4 * 0x01)

#define ETH_INT_MASK    (4 * 0x02)

#define ETH_IPGT        (4 * 0x03)

#define ETH_IPGR1       (4 * 0x04)

#define ETH_IPGR2       (4 * 0x05)

#define ETH_PACKETLEN   (4 * 0x06)

#define ETH_COLLCONF    (4 * 0x07)

#define ETH_TX_BD_NUM   (4 * 0x08)

#define ETH_CTRLMODER   (4 * 0x09)

#define ETH_MIIMODER    (4 * 0x0A)

#define ETH_MIICOMMAND  (4 * 0x0B)

#define ETH_MIIADDRESS  (4 * 0x0C)

#define ETH_MIITX_DATA  (4 * 0x0D)

#define ETH_MIIRX_DATA  (4 * 0x0E)

#define ETH_MIISTATUS   (4 * 0x0F)

#define ETH_MAC_ADDR0   (4 * 0x10)

#define ETH_MAC_ADDR1   (4 * 0x11)

#define ETH_HASH0       (4 * 0x12)

#define ETH_HASH1       (4 * 0x13)

/* Where BD's are stored */

#define ETH_BD_BASE        0x400

#define ETH_BD_COUNT       0x100

#define ETH_BD_SPACE       (4 * ETH_BD_COUNT)

/* Where to point DMA to transmit/receive */

#define ETH_DMA_RX_TX      0x800

/* Field definitions for MODER */

#define ETH_MODER_DMAEN_OFFSET     17

#define ETH_MODER_RECSMALL_OFFSET  16

#define ETH_MODER_PAD_OFFSET       15

#define ETH_MODER_HUGEN_OFFSET     14

#define ETH_MODER_CRCEN_OFFSET     13

#define ETH_MODER_DLYCRCEN_OFFSET  12

#define ETH_MODER_RST_OFFSET       11

#define ETH_MODER_FULLD_OFFSET     10

#define ETH_MODER_EXDFREN_OFFSET   9

#define ETH_MODER_NOBCKOF_OFFSET   8

#define ETH_MODER_LOOPBCK_OFFSET   7

#define ETH_MODER_IFG_OFFSET       6

#define ETH_MODER_PRO_OFFSET       5

#define ETH_MODER_IAM_OFFSET       4

#define ETH_MODER_BRO_OFFSET       3

#define ETH_MODER_NOPRE_OFFSET     2

#define ETH_MODER_TXEN_OFFSET      1

#define ETH_MODER_RXEN_OFFSET      0

/* Field definitions for INT_SOURCE */

#define ETH_INT_SOURCE_RXC_OFFSET  6

#define ETH_INT_SOURCE_TXC_OFFSET  5

#define ETH_INT_SOURCE_BUSY_OFFSET 4

#define ETH_INT_SOURCE_RXE_OFFSET  3

#define ETH_INT_SOURCE_RXB_OFFSET  2

#define ETH_INT_SOURCE_TXE_OFFSET  1

#define ETH_INT_SOURCE_TXB_OFFSET  0

/* Field definitions for INT_MASK */

#define ETH_INT_MASK_RXC_M_OFFSET  6

#define ETH_INT_MASK_TXC_M_OFFSET  5

#define ETH_INT_MASK_BUSY_M_OFFSET 4

#define ETH_INT_MASK_RXE_M_OFFSET  3

#define ETH_INT_MASK_RXB_M_OFFSET  2

#define ETH_INT_MASK_TXE_M_OFFSET  1

#define ETH_INT_MASK_TXB_M_OFFSET  0

/* Field definitions for PACKETLEN */

#define ETH_PACKETLEN_MINFL_OFFSET 16

#define ETH_PACKETLEN_MINFL_WIDTH  16

#define ETH_PACKETLEN_MAXFL_OFFSET 0

#define ETH_PACKETLEN_MAXFL_WIDTH  16

/* Field definitions for COLLCONF */

#define ETH_COLLCONF_MAXRET_OFFSET 16

#define ETH_COLLCONF_MAXRET_WIDTH  4

#define ETH_COLLCONF_COLLVALID_OFFSET 0

#define ETH_COLLCONF_COLLVALID_WIDTH  6

/* Field definitions for CTRLMODER */

#define ETH_CMODER_TXFLOW_OFFSET   2

#define ETH_CMODER_RXFLOW_OFFSET   1

#define ETH_CMODER_PASSALL_OFFSET  0

/* Field definitions for MIIMODER */

#define ETH_MIIMODER_MRST_OFFSET   9

#define ETH_MIIMODER_NOPRE_OFFSET  8

#define ETH_MIIMODER_CLKDIV_OFFSET 0

#define ETH_MIIMODER_CLKDIV_WIDTH  8

/* Field definitions for MIICOMMAND */

#define ETH_MIICOMM_WCDATA_OFFSET  2

#define ETH_MIICOMM_RSTAT_OFFSET   1

#define ETH_MIICOMM_SCANS_OFFSET   0

/* Field definitions for MIIADDRESS */

#define ETH_MIIADDR_RGAD_OFFSET    8

#define ETH_MIIADDR_RGAD_WIDTH     5

#define ETH_MIIADDR_FIAD_OFFSET    0

#define ETH_MIIADDR_FIAD_WIDTH     5

/* Field definitions for MIISTATUS */

#define ETH_MIISTAT_NVALID_OFFSET  1

#define ETH_MIISTAT_BUSY_OFFSET    1

#define ETH_MIISTAT_FAIL_OFFSET    0

/* Field definitions for TX buffer descriptors */

#define ETH_TX_BD_LENGTH_OFFSET        16

#define ETH_TX_BD_LENGTH_WIDTH         16

#define ETH_TX_BD_READY_OFFSET         15

#define ETH_TX_BD_IRQ_OFFSET           14

#define ETH_TX_BD_WRAP_OFFSET          13

#define ETH_TX_BD_PAD_OFFSET           12

#define ETH_TX_BD_CRC_OFFSET           11

#define ETH_TX_BD_LAST_OFFSET          10

#define ETH_TX_BD_PAUSE_OFFSET         9

#define ETH_TX_BD_UNDERRUN_OFFSET      8

#define ETH_TX_BD_RETRY_OFFSET         4

#define ETH_TX_BD_RETRY_WIDTH          4

#define ETH_TX_BD_RETRANSMIT_OFFSET    3

#define ETH_TX_BD_COLLISION_OFFSET     2

#define ETH_TX_BD_DEFER_OFFSET         1

#define ETH_TX_BD_NO_CARRIER_OFFSET    0

/* Field definitions for RX buffer descriptors */

#define ETH_RX_BD_LENGTH_OFFSET        16

#define ETH_RX_BD_LENGTH_WIDTH         16

#define ETH_RX_BD_READY_OFFSET         15

#define ETH_RX_BD_IRQ_OFFSET           14

#define ETH_RX_BD_WRAP_OFFSET          13

#define ETH_RX_BD_MISS_OFFSET          7

#define ETH_RX_BD_UVERRUN_OFFSET       6

#define ETH_RX_BD_INVALID_OFFSET       5

#define ETH_RX_BD_DRIBBLE_OFFSET       4

#define ETH_RX_BD_TOOBIG_OFFSET        3

#define ETH_RX_BD_TOOSHORT_OFFSET      2

#define ETH_RX_BD_CRC_OFFSET           1

#define ETH_RX_BD_COLLISION_OFFSET     0

/*

 * Ethernet protocol definitions

 */

#ifdef HAVE_NET_ETHERNET_H

#elif defined(HAVE_SYS_ETHERNET_H)

#ifndef ETHER_ADDR_LEN

#define ETHER_ADDR_LEN ETHERADDRL

#endif

#ifndef ETHER_HDR_LEN

#define ETHER_HDR_LEN sizeof(struct ether_header)

#endif

#else /* !HAVE_NET_ETHERNET_H && !HAVE_SYS_ETHERNET_H - */

#ifdef __CYGWIN__

/* define some missing cygwin defines.

 *

 * NOTE! there is no nonblocking socket option implemented in cygwin.dll

 *       so defining MSG_DONTWAIT is just (temporary) workaround !!!

 */

#define MSG_DONTWAIT  0x40

#define ETH_HLEN      14

#endif /* __CYGWIN__ */

#define ETH_ALEN    6

struct ether_addr

{

  u_int8_t ether_addr_octet[ETH_ALEN];

};

struct ether_header

{

  u_int8_t ether_dhost[ETH_ALEN];       /* destination eth addr */

  u_int8_t ether_shost[ETH_ALEN];       /* source ether addr    */

  u_int16_t ether_type;         /* packet type ID field */

};

/* Ethernet protocol ID's */

#define ETHERTYPE_PUP           0x0200  /* Xerox PUP */

#define ETHERTYPE_IP            0x0800  /* IP */

#define ETHERTYPE_ARP           0x0806  /* Address resolution */

#define ETHERTYPE_REVARP        0x8035  /* Reverse ARP */

#define ETHER_ADDR_LEN  ETH_ALEN        /* size of ethernet addr */

#define ETHER_TYPE_LEN  2       /* bytes in type field */

#define ETHER_CRC_LEN   4       /* bytes in CRC field */

#define ETHER_HDR_LEN   ETH_HLEN        /* total octets in header */

#define ETHER_MIN_LEN   (ETH_ZLEN + ETHER_CRC_LEN)      /* min packet length */

#define ETHER_MAX_LEN   (ETH_FRAME_LEN + ETHER_CRC_LEN) /* max packet length */

/* make sure ethenet length is valid */

#define ETHER_IS_VALID_LEN(foo) \

        ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)

/*

 * The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have

 * (type-ETHERTYPE_TRAIL)*512 bytes of data followed

 * by an ETHER type (as given above) and then the (variable-length) header.

 */

#define ETHERTYPE_TRAIL         0x1000  /* Trailer packet */

#define ETHERTYPE_NTRAILER      16

#define ETHERMTU        ETH_DATA_LEN

#define ETHERMIN        (ETHER_MIN_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)

#endif /* HAVE_NET_ETHERNET_H */

/*

 * Implementatino of Ethernet MAC Registers and State

 */

#define ETH_TXSTATE_IDLE        0

#define ETH_TXSTATE_WAIT4BD     10

#define ETH_TXSTATE_READFIFO    20

#define ETH_TXSTATE_TRANSMIT    30

#define ETH_RXSTATE_IDLE        0

#define ETH_RXSTATE_WAIT4BD     10

#define ETH_RXSTATE_RECV        20

#define ETH_RXSTATE_WRITEFIFO   30

#define ETH_RTX_FILE    0

#define ETH_RTX_SOCK    1

#define ETH_RTX_VAPI    2

#define ETH_MAXPL   0x10000

enum

{ ETH_VAPI_DATA = 0,

  ETH_VAPI_CTRL,

  ETH_NUM_VAPI_IDS

};