//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// SMII Receiver/Decoder (usually at PHY end) ////
|
//// SMII Receiver/Decoder (usually at PHY end) ////
|
//// ////
|
//// ////
|
//// Description ////
|
//// Description ////
|
//// Low pin count serial MII ethernet interface ////
|
//// Low pin count serial MII ethernet interface ////
|
//// ////
|
//// ////
|
//// To Do: ////
|
//// To Do: ////
|
//// - ////
|
//// - ////
|
//// ////
|
//// ////
|
//// Author(s): ////
|
//// Author(s): ////
|
//// - Michael Unneback, unneback@opencores.org ////
|
//// - Michael Unneback, unneback@opencores.org ////
|
//// ORSoC AB michael.unneback@orsoc.se ////
|
//// ORSoC AB michael.unneback@orsoc.se ////
|
//// - Julius Baxter, jb@orsoc.se ////
|
//// - Julius Baxter, jb@orsoc.se ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
//// ////
|
//// ////
|
//// Copyright (C) 2009 Authors and OPENCORES.ORG ////
|
//// Copyright (C) 2009 Authors and OPENCORES.ORG ////
|
//// ////
|
//// ////
|
//// This source file may be used and distributed without ////
|
//// This source file may be used and distributed without ////
|
//// restriction provided that this copyright statement is not ////
|
//// restriction provided that this copyright statement is not ////
|
//// removed from the file and that any derivative work contains ////
|
//// removed from the file and that any derivative work contains ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// the original copyright notice and the associated disclaimer. ////
|
//// ////
|
//// ////
|
//// This source file is free software; you can redistribute it ////
|
//// This source file is free software; you can redistribute it ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// Public License as published by the Free Software Foundation; ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// either version 2.1 of the License, or (at your option) any ////
|
//// later version. ////
|
//// later version. ////
|
//// ////
|
//// ////
|
//// This source is distributed in the hope that it will be ////
|
//// This source is distributed in the hope that it will be ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
//// details. ////
|
//// details. ////
|
//// ////
|
//// ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// You should have received a copy of the GNU Lesser General ////
|
//// Public License along with this source; if not, download it ////
|
//// Public License along with this source; if not, download it ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// from http://www.opencores.org/lgpl.shtml ////
|
//// ////
|
//// ////
|
//////////////////////////////////////////////////////////////////////
|
//////////////////////////////////////////////////////////////////////
|
module smii_phy
|
module smii_phy
|
(
|
(
|
// SMII
|
// SMII
|
input smii_tx,
|
input smii_tx,
|
input smii_sync,
|
input smii_sync,
|
output reg smii_rx,
|
output reg smii_rx,
|
|
|
// MII
|
// MII
|
// TX
|
// TX
|
/* ALL I/Os swapped compared to SMII on MAC end MAC - jb */
|
/* ALL I/Os swapped compared to SMII on MAC end MAC - jb */
|
output reg [3:0] ethphy_mii_tx_d,
|
output reg [3:0] ethphy_mii_tx_d,
|
output reg ethphy_mii_tx_en,
|
output reg ethphy_mii_tx_en,
|
output reg ethphy_mii_tx_err,
|
output reg ethphy_mii_tx_err,
|
input ethphy_mii_tx_clk,
|
input ethphy_mii_tx_clk,
|
// RX
|
// RX
|
input [3:0] ethphy_mii_rx_d,
|
input [3:0] ethphy_mii_rx_d,
|
input ethphy_mii_rx_dv,
|
input ethphy_mii_rx_dv,
|
input ethphy_mii_rx_err,
|
input ethphy_mii_rx_err,
|
input ethphy_mii_rx_clk,
|
input ethphy_mii_rx_clk,
|
input ethphy_mii_mcoll,
|
input ethphy_mii_mcoll,
|
input ethphy_mii_crs,
|
input ethphy_mii_crs,
|
|
|
input fast_ethernet,
|
input fast_ethernet,
|
input duplex,
|
input duplex,
|
input link,
|
input link,
|
|
|
// internal
|
// internal
|
//input [10:1] state,
|
//input [10:1] state,
|
// clock and reset
|
// clock and reset
|
input clk, /* Global reference clock for both SMII modules */
|
input clk, /* Global reference clock for both SMII modules */
|
input rst_n
|
input rst_n
|
);
|
);
|
|
|
reg [3:0] rx_tmp;
|
reg [3:0] rx_tmp;
|
|
|
reg jabber = 0;
|
reg jabber = 0;
|
|
|
reg mtx_clk_tmp, mrx_clk_tmp;
|
reg mtx_clk_tmp, mrx_clk_tmp;
|
|
|
reg [3:0] tx_cnt;
|
reg [3:0] tx_cnt;
|
reg [3:0] rx_cnt;
|
reg [3:0] rx_cnt;
|
|
|
|
|
/**************************************************************************/
|
/**************************************************************************/
|
/* Counters */
|
/* Counters */
|
/**************************************************************************/
|
/**************************************************************************/
|
|
|
/* Generate the state counter, based on incoming sync signal */
|
/* Generate the state counter, based on incoming sync signal */
|
/* 10-bit shift register, indicating where we are */
|
/* 10-bit shift register, indicating where we are */
|
reg [10:1] state_shiftreg;
|
reg [10:1] state_shiftreg;
|
|
|
/* A wire hooked up from bit 0 with the last byte of the state counter/shiftreg */
|
/* A wire hooked up from bit 0 with the last byte of the state counter/shiftreg */
|
wire [7:0] state_shiftreg_top_byte;
|
wire [7:0] state_shiftreg_top_byte;
|
assign state_shiftreg_top_byte[7:0] = state_shiftreg[10:3];
|
assign state_shiftreg_top_byte[7:0] = state_shiftreg[10:3];
|
|
|
always @(posedge clk)
|
always @(posedge clk)
|
begin
|
begin
|
if (!rst_n)
|
|
begin
|
|
state_shiftreg <= 10'b0000000001;
|
|
end
|
|
else
|
|
begin
|
|
if (smii_sync) /* sync signal from MAC */
|
if (smii_sync) /* sync signal from MAC */
|
state_shiftreg <= 10'b0000000010;
|
state_shiftreg <= 10'b0000000010;
|
else if (state_shiftreg[10])
|
else if (state_shiftreg[10])
|
state_shiftreg <= 10'b0000000001;
|
state_shiftreg <= 10'b0000000001;
|
else
|
else
|
state_shiftreg[10:2] <= state_shiftreg[9:1];
|
state_shiftreg[10:2] <= state_shiftreg[9:1];
|
end // else: !if(!rst_n)
|
end
|
end // always @ (posedge clk)
|
|
|
|
|
|
/* counter from 0 to 9, counting the 10-bit segments we'll transmit
|
/* counter from 0 to 9, counting the 10-bit segments we'll transmit
|
via SMII*/
|
via SMII*/
|
reg [3:0] segment_ctr;
|
reg [3:0] segment_ctr;
|
|
|
always @(posedge clk)
|
always @(posedge clk)
|
begin
|
begin
|
if(!rst_n)
|
if(!rst_n)
|
segment_ctr <= 4'h0;
|
segment_ctr <= 4'h0;
|
else
|
else
|
begin
|
begin
|
if(fast_ethernet) /* If using 100Mbs, then each segment is
|
if(fast_ethernet) /* If using 100Mbs, then each segment is
|
different, we don't count the repeats */
|
different, we don't count the repeats */
|
segment_ctr <= 4'h0;
|
segment_ctr <= 4'h0;
|
else if (state_shiftreg[10])
|
else if (state_shiftreg[10])
|
if (segment_ctr == 4'h9) /* Wrap */
|
if (segment_ctr == 4'h9) /* Wrap */
|
segment_ctr <= 4'h0;
|
segment_ctr <= 4'h0;
|
else /* Increment */
|
else /* Increment */
|
segment_ctr <= segment_ctr + 1'b1;
|
segment_ctr <= segment_ctr + 1'b1;
|
end
|
end
|
end // always @ (posedge clk)
|
end // always @ (posedge clk)
|
|
|
|
|
/**************************************************************************/
|
/**************************************************************************/
|
/* RX path logic PHY->(MII->SMII)->MAC */
|
/* RX path logic PHY->(MII->SMII)->MAC */
|
/**************************************************************************/
|
/**************************************************************************/
|
|
|
reg rx_nibble_sel, rx_byte_valid;
|
|
reg [7:0] rx_data_byte_rx_clk;
|
reg [7:0] rx_data_byte_rx_clk;
|
|
|
reg [4:0] rx_dv_nib_0;
|
reg [4:0] rx_dv_nib_0;
|
reg rx_nib_first,rx_nib_first_r; // if high, nib_0 contains the "first" of the pair of nibs
|
reg rx_nib_first,rx_nib_first_r; // if high, nib_0 contains the "first" of the pair of nibs
|
reg [3:0] rx_segment_begin_num;
|
reg [3:0] rx_segment_begin_num;
|
|
|
// Allow us to check if RX DV has been low for a while
|
// Allow us to check if RX DV has been low for a while
|
reg [3:0] rx_dv_long_low_sr;
|
reg [3:0] rx_dv_long_low_sr;
|
wire rx_dv_long_low;
|
wire dv_long_low;
|
always @(posedge ethphy_mii_rx_clk)
|
always @(posedge ethphy_mii_rx_clk)
|
rx_dv_long_low_sr[3:0] <= {rx_dv_long_low_sr[2:0], ethphy_mii_rx_dv};
|
rx_dv_long_low_sr[3:0] <= {rx_dv_long_low_sr[2:0], ethphy_mii_rx_dv};
|
assign rx_dv_long_low = ~(|rx_dv_long_low_sr[3:0]);
|
assign rx_dv_long_low = ~(|rx_dv_long_low_sr);
|
reg rx_dv;
|
wire [9:0] rx_fifo_out;
|
wire [8:0] rx_fifo_out;
|
|
wire rx_fifo_empty,rx_fifo_almost_empty;
|
wire rx_fifo_empty,rx_fifo_almost_empty;
|
reg rx_fifo_pop;
|
|
|
|
always @(posedge ethphy_mii_rx_clk or negedge rst_n)
|
always @(posedge ethphy_mii_rx_clk or negedge rst_n)
|
begin
|
begin
|
if(!rst_n)
|
if(!rst_n)
|
begin
|
begin
|
rx_dv_nib_0 <= 0;
|
rx_dv_nib_0 <= 0;
|
rx_nib_first <= 0;
|
rx_nib_first <= 0;
|
rx_nib_first_r <= 0;
|
rx_nib_first_r <= 0;
|
end
|
end
|
else
|
else
|
begin
|
begin
|
if (!rx_nib_first)
|
if (!rx_nib_first)
|
rx_dv_nib_0 <= {ethphy_mii_rx_dv,ethphy_mii_rx_d};
|
rx_dv_nib_0 <= {ethphy_mii_rx_dv,ethphy_mii_rx_d};
|
if(ethphy_mii_rx_dv)
|
if(ethphy_mii_rx_dv)
|
rx_nib_first <= ~rx_nib_first;
|
rx_nib_first <= ~rx_nib_first;
|
|
|
rx_nib_first_r <= rx_nib_first;
|
rx_nib_first_r <= rx_nib_first;
|
|
|
end
|
end
|
end // always @ (posedge ethphy_mii_rx_clk or negedge rst_n)
|
end // always @ (posedge ethphy_mii_rx_clk or negedge rst_n)
|
|
|
always @(posedge clk or negedge rst_n)
|
wire rx_fifo_pop;
|
begin
|
|
if (!rst_n) rx_fifo_pop <= 0;
|
|
else rx_fifo_pop <= (rx_fifo_almost_empty) ? (rx_fifo_pop ? ~rx_fifo_empty : rx_fifo_pop) : 1;
|
|
|
|
rx_dv <= (state_shiftreg[10] & (((rx_segment_begin_num == (segment_ctr-1)) && !fast_ethernet)| fast_ethernet)) ? (rx_fifo_pop) : rx_dv;
|
|
end
|
reg ethphy_mii_rx_dv_r;
|
|
wire ethphy_mii_rx_dv_re;
|
|
wire ethphy_mii_rx_dv_fe;
|
|
|
|
always @(posedge ethphy_mii_rx_clk)
|
|
ethphy_mii_rx_dv_r <= ethphy_mii_rx_dv;
|
|
|
|
assign ethphy_mii_rx_dv_re = ethphy_mii_rx_dv & !ethphy_mii_rx_dv_r;
|
|
assign ethphy_mii_rx_dv_fe = !ethphy_mii_rx_dv & ethphy_mii_rx_dv_r;
|
|
|
|
reg rx_fifo_final_pop;
|
|
|
always @(posedge clk)
|
always @(posedge clk)
|
begin
|
if (!rst_n)
|
/* remember which counter value we were at when rx enable/valid
|
rx_fifo_final_pop <= 0;
|
went high.
|
else if (rx_fifo_final_pop & state_shiftreg[1] &
|
This is only useful when not doing fast ethernet*/
|
(((rx_segment_begin_num == segment_ctr) & !fast_ethernet) | fast_ethernet))
|
|
rx_fifo_final_pop <= 0;
|
|
else if (rx_fifo_pop & rx_fifo_empty)
|
|
rx_fifo_final_pop <= 1;
|
|
|
/* rx en has gone high - remember the sequence number we're in */
|
always @(posedge ethphy_mii_rx_clk)
|
if ((rx_segment_begin_num == 4'hf) & (~rx_dv_long_low))
|
if (ethphy_mii_rx_dv_re)
|
rx_segment_begin_num <= segment_ctr;
|
rx_segment_begin_num <= segment_ctr;
|
|
|
/* If rx enable goes low again, reset the segment number */
|
reg do_fifo_pop;
|
if (rx_dv_long_low)
|
always @(posedge clk)
|
/* reset to 0xf */
|
if (!rst_n)
|
rx_segment_begin_num <= 4'hf;
|
do_fifo_pop <= 0;
|
end
|
else if (rx_fifo_empty)
|
|
do_fifo_pop <= 0;
|
|
else if (!rx_fifo_almost_empty)
|
|
do_fifo_pop <= 1;
|
|
|
|
assign rx_fifo_pop = (state_shiftreg[9] & do_fifo_pop) &
|
|
(((rx_segment_begin_num == segment_ctr) & !fast_ethernet)
|
|
| fast_ethernet);
|
|
|
|
reg rx_dv_r;
|
|
wire rx_dv;
|
|
|
|
// Error where rx_dv goes high one cycle too late, so is low for very first data frame - FIXME!
|
|
//reg rx_dv;
|
|
always @(posedge clk)
|
|
if (!rst_n)
|
|
rx_dv_r <= 0;
|
|
else if (rx_fifo_final_pop & state_shiftreg[1] &
|
|
(((rx_segment_begin_num == segment_ctr) & !fast_ethernet) | fast_ethernet))
|
|
rx_dv_r <= 0;
|
|
else if (rx_fifo_pop)
|
|
rx_dv_r <= rx_fifo_out[9];
|
|
|
|
assign rx_dv = rx_dv_r | rx_fifo_pop;
|
|
|
|
|
|
reg sending_segment;
|
|
always @(posedge clk)
|
|
if (!rst_n)
|
|
sending_segment <= 0;
|
|
else if (rx_fifo_final_pop & state_shiftreg[1] & (((rx_segment_begin_num == segment_ctr) & !fast_ethernet) | fast_ethernet))
|
|
sending_segment <= 0;
|
|
else if ((state_shiftreg[9] & do_fifo_pop) & (((rx_segment_begin_num == segment_ctr) & !fast_ethernet) | fast_ethernet))
|
|
sending_segment <= !rx_fifo_empty;
|
|
|
/* A fifo, storing RX bytes coming from the PHY interface */
|
/* A fifo, storing RX bytes coming from the PHY interface */
|
generic_fifo #(9, 64) rx_fifo
|
generic_fifo #(10, 1024, 10) rx_fifo
|
(
|
(
|
// Outputs
|
// Outputs
|
.psh_full (),
|
.psh_full (),
|
.pop_q (rx_fifo_out),
|
.pop_q (rx_fifo_out),
|
.pop_empty (rx_fifo_empty),
|
.pop_empty (rx_fifo_empty),
|
.almost_empty (rx_fifo_almost_empty),
|
.almost_empty (rx_fifo_almost_empty),
|
// Inputs
|
// Inputs
|
.async_rst_n (rst_n),
|
.async_rst_n (rst_n),
|
.psh_clk (ethphy_mii_rx_clk),
|
.psh_clk (ethphy_mii_rx_clk),
|
.psh_we (rx_nib_first_r),
|
.psh_we (rx_nib_first_r),
|
.psh_d ({ethphy_mii_rx_err,ethphy_mii_rx_d,rx_dv_nib_0[3:0]}),
|
.psh_d ({ethphy_mii_rx_dv,ethphy_mii_rx_err,ethphy_mii_rx_d,rx_dv_nib_0[3:0]}),
|
.pop_clk (clk),
|
.pop_clk (clk),
|
.pop_re ((state_shiftreg[1] & rx_fifo_pop)&(((rx_segment_begin_num == segment_ctr) && !fast_ethernet)| fast_ethernet)));
|
.pop_re (rx_fifo_pop)
|
|
);
|
|
|
`ifdef RX_SYNC_1
|
reg [9:0] smii_rx_frame_next;
|
|
always @(posedge clk)
|
|
if (state_shiftreg[10])
|
|
smii_rx_frame_next <= rx_dv ? {rx_fifo_out[7:0],1'b1,ethphy_mii_crs} :
|
|
{3'b101,jabber,link,duplex,fast_ethernet,
|
|
ethphy_mii_rx_err,1'b0,ethphy_mii_crs};
|
|
|
/* Assign the rx line out */
|
|
always @(posedge clk)
|
always @(posedge clk)
|
smii_rx <= state_shiftreg[1] ? ethphy_mii_crs : /* 1st bit is MII CRS */
|
smii_rx <= state_shiftreg[10] & smii_rx_frame_next[0] |
|
state_shiftreg[2] ? ((rx_dv & (segment_ctr==4'h0) & !fast_ethernet) |
|
state_shiftreg[1] & smii_rx_frame_next[1] |
|
rx_dv) :
|
state_shiftreg[2] & smii_rx_frame_next[2] |
|
// inter-frame status byte or data byte
|
state_shiftreg[3] & smii_rx_frame_next[3] |
|
state_shiftreg[3] ? (rx_dv ? (rx_fifo_out[0]) : ethphy_mii_rx_err) :
|
state_shiftreg[4] & smii_rx_frame_next[4] |
|
state_shiftreg[4] ? (rx_dv ? (rx_fifo_out[1]) : fast_ethernet) :
|
state_shiftreg[5] & smii_rx_frame_next[5] |
|
state_shiftreg[5] ? (rx_dv ? (rx_fifo_out[2]) : duplex) :
|
state_shiftreg[6] & smii_rx_frame_next[6] |
|
state_shiftreg[6] ? (rx_dv ? (rx_fifo_out[3]) : link) :
|
state_shiftreg[7] & smii_rx_frame_next[7] |
|
state_shiftreg[7] ? (rx_dv ? (rx_fifo_out[4]) : jabber) :
|
state_shiftreg[8] & smii_rx_frame_next[8] |
|
state_shiftreg[8] ? (rx_dv ? (rx_fifo_out[5]) : 1) :
|
state_shiftreg[9] & smii_rx_frame_next[9];
|
state_shiftreg[9] ? (rx_dv ? (rx_fifo_out[6]) : 0) :
|
|
state_shiftreg[10] ? (rx_dv ? (rx_fifo_out[7]) : 1) : 0;
|
|
|
|
`else // !`ifdef RX_SYNC_1
|
|
|
|
/* Assign the rx line out */
|
|
always @(posedge clk)
|
reg [79:0] rx_statename;
|
smii_rx <= state_shiftreg[10] ? ethphy_mii_crs : /* 1st bit is MII CRS */
|
always @* begin
|
state_shiftreg[1] ? ((rx_dv & (segment_ctr==4'h0) & !fast_ethernet) |
|
case (1)
|
rx_dv) :
|
state_shiftreg[1] :
|
// inter-frame status byte or data byte
|
rx_statename = "CRS";
|
state_shiftreg[2] ? (rx_dv ? (rx_fifo_out[0]) : ethphy_mii_rx_err) :
|
state_shiftreg[2] :
|
state_shiftreg[3] ? (rx_dv ? (rx_fifo_out[1]) : fast_ethernet) :
|
rx_statename = "RX_DV";
|
state_shiftreg[4] ? (rx_dv ? (rx_fifo_out[2]) : duplex) :
|
state_shiftreg[3]:
|
state_shiftreg[5] ? (rx_dv ? (rx_fifo_out[3]) : link) :
|
rx_statename = "RXD0/RXERR";
|
state_shiftreg[6] ? (rx_dv ? (rx_fifo_out[4]) : jabber) :
|
state_shiftreg[4]:
|
state_shiftreg[7] ? (rx_dv ? (rx_fifo_out[5]) : 1) :
|
rx_statename = "RXD1/Fast";
|
state_shiftreg[8] ? (rx_dv ? (rx_fifo_out[6]) : 0) :
|
state_shiftreg[5]:
|
state_shiftreg[9] ? (rx_dv ? (rx_fifo_out[7]) : 1) : 0;
|
rx_statename = "RXD2/Dupl";
|
`endif // !`ifdef RX_SYNC_1
|
state_shiftreg[6]:
|
|
rx_statename = "RXD3/Link";
|
|
state_shiftreg[7]:
|
|
rx_statename = "RXD4/Jabb";
|
|
state_shiftreg[8]:
|
|
rx_statename = "RXD5/UNV";
|
|
state_shiftreg[9]:
|
|
rx_statename = "RXD6/FCD";
|
|
state_shiftreg[10] :
|
|
rx_statename = "RXD7/AS1";
|
|
default:
|
|
rx_statename = "XXXXXXX";
|
|
endcase // case (1)
|
|
end // always @ *
|
|
|
|
|
|
|
/* Status seq.: CRS, DV, ER, Speed, Duplex, Link, Jabber, UPV, FCD, 1 */
|
/* Status seq.: CRS, DV, ER, Speed, Duplex, Link, Jabber, UPV, FCD, 1 */
|
// {1'b1,1'b0,1'b1,jabber,link,duplex,,ethphy_mii_rx_err});
|
// {1'b1,1'b0,1'b1,jabber,link,duplex,,ethphy_mii_rx_err});
|
|
|
|
|
/**************************************************************************/
|
/**************************************************************************/
|
/* TX path logic MAC->(SMII->MII)->PHY */
|
/* TX path logic MAC->(SMII->MII)->PHY */
|
/**************************************************************************/
|
/**************************************************************************/
|
|
|
/* We ignore the data when TX_EN bit is not high -
|
/* We ignore the data when TX_EN bit is not high -
|
it's only used in MAC to MAC comms*/
|
it's only used in MAC to MAC comms*/
|
|
|
|
|
/* Register the sequence appropriately as it comes in */
|
/* Register the sequence appropriately as it comes in */
|
reg tx_er_seqbit_scratch;
|
reg tx_er_seqbit_scratch;
|
reg tx_en_seqbit_scratch;
|
reg tx_en_seqbit_scratch;
|
reg [7:0] tx_data_byte_scratch;
|
reg [7:0] tx_data_byte_scratch;
|
|
|
reg [2:0] tx_byte_to_phy; /* PHY sourced TX_CLK domain */
|
reg [2:0] tx_byte_to_phy; /* PHY sourced TX_CLK domain */
|
|
|
wire tx_fifo_empty, tx_fifo_almost_empty;
|
wire tx_fifo_empty, tx_fifo_almost_empty;
|
wire tx_fifo_full;
|
wire tx_fifo_full;
|
wire [7:0] tx_fifo_q_dat;
|
wire [7:0] tx_fifo_q_dat;
|
wire tx_fifo_q_err;
|
wire tx_fifo_q_err;
|
reg tx_fifo_pop;
|
reg tx_fifo_pop;
|
reg [3:0] tx_segment_begin_num;
|
reg [3:0] tx_segment_begin_num;
|
wire [3:0] tx_segment_load_num;
|
wire [3:0] tx_segment_load_num;
|
|
|
assign tx_segment_load_num = (tx_segment_begin_num == 0) ? 4'h9 : tx_segment_begin_num - 1;
|
assign tx_segment_load_num = (tx_segment_begin_num == 0) ? 4'h9 : tx_segment_begin_num - 1;
|
|
|
/* Signal to tell us an appropriate time to copy the values out of the
|
/* Signal to tell us an appropriate time to copy the values out of the
|
temp regs we put the incoming TX line into when we've received a
|
temp regs we put the incoming TX line into when we've received a
|
sequence off the SMII TX line that has TX_EN high */
|
sequence off the SMII TX line that has TX_EN high */
|
wire tx_seqbits_copy;
|
wire tx_seqbits_copy;
|
assign tx_seqbits_copy = (
|
assign tx_seqbits_copy = (
|
(
|
(
|
((!fast_ethernet) & (segment_ctr == tx_segment_load_num)) |
|
((!fast_ethernet) & (segment_ctr == tx_segment_load_num)) |
|
fast_ethernet
|
fast_ethernet
|
)
|
)
|
& tx_en_seqbit_scratch & state_shiftreg[1]
|
& tx_en_seqbit_scratch & state_shiftreg[1]
|
);
|
);
|
|
|
always @(posedge clk)
|
always @(posedge clk)
|
begin
|
begin
|
/* remember which counter value we were at when tx enable/valid
|
/* remember which counter value we were at when tx enable/valid
|
went high.
|
went high.
|
This is only useful when not doing fast ethernet*/
|
This is only useful when not doing fast ethernet*/
|
|
|
/* tx en has gone high - remember the sequence number we're in */
|
/* tx en has gone high - remember the sequence number we're in */
|
if ((tx_segment_begin_num == 4'hf) & (tx_en_seqbit_scratch))
|
if ((tx_segment_begin_num == 4'hf) & (tx_en_seqbit_scratch))
|
tx_segment_begin_num <= segment_ctr;
|
tx_segment_begin_num <= segment_ctr;
|
|
|
/* If tx enable goes low again, reset the segment number */
|
/* If tx enable goes low again, reset the segment number */
|
if (!tx_en_seqbit_scratch)
|
if (!tx_en_seqbit_scratch)
|
/* reset to 0xf */
|
/* reset to 0xf */
|
tx_segment_begin_num <= 4'hf;
|
tx_segment_begin_num <= 4'hf;
|
end
|
end
|
|
|
|
|
always @(posedge clk)
|
always @(posedge clk)
|
begin
|
begin
|
if (!rst_n)
|
if (!rst_n)
|
begin
|
begin
|
tx_er_seqbit_scratch <= 0;
|
tx_er_seqbit_scratch <= 0;
|
tx_en_seqbit_scratch <= 0;
|
tx_en_seqbit_scratch <= 0;
|
tx_data_byte_scratch <= 0;
|
tx_data_byte_scratch <= 0;
|
end
|
end
|
else
|
else
|
begin
|
begin
|
if(state_shiftreg[1])
|
if(state_shiftreg[1])
|
tx_er_seqbit_scratch <= smii_tx;
|
tx_er_seqbit_scratch <= smii_tx;
|
|
|
if(state_shiftreg[2])
|
if(state_shiftreg[2])
|
tx_en_seqbit_scratch <= smii_tx;
|
tx_en_seqbit_scratch <= smii_tx;
|
|
|
/* Preserve all but current bit of interest, as indicated
|
/* Preserve all but current bit of interest, as indicated
|
by state vector bit (reversed, becuase we get MSbit
|
by state vector bit (reversed, becuase we get MSbit
|
first) and OR in the current smii_tx line value at this
|
first) and OR in the current smii_tx line value at this
|
position*/
|
position*/
|
if((|state_shiftreg[10:3]) & tx_en_seqbit_scratch)
|
if((|state_shiftreg[10:3]) & tx_en_seqbit_scratch)
|
tx_data_byte_scratch <= (tx_data_byte_scratch & ~state_shiftreg_top_byte) |
|
tx_data_byte_scratch <= (tx_data_byte_scratch & ~state_shiftreg_top_byte) |
|
({8{smii_tx}} & state_shiftreg_top_byte);
|
({8{smii_tx}} & state_shiftreg_top_byte);
|
|
|
end
|
end
|
end // always @ (posedge clk)
|
end // always @ (posedge clk)
|
|
|
reg [3:0] nib;
|
reg [3:0] nib;
|
|
|
|
|
|
|
/* In the event we have a valid byte frame then get it to the
|
/* In the event we have a valid byte frame then get it to the
|
PHY as quickly as possible - this is TX_CLK domain */
|
PHY as quickly as possible - this is TX_CLK domain */
|
always @(posedge ethphy_mii_tx_clk or negedge rst_n)
|
always @(posedge ethphy_mii_tx_clk or negedge rst_n)
|
begin
|
begin
|
if(!rst_n)
|
if(!rst_n)
|
begin
|
begin
|
tx_byte_to_phy <= 0;
|
tx_byte_to_phy <= 0;
|
tx_fifo_pop <= 1'b0;
|
tx_fifo_pop <= 1'b0;
|
/* Output MII registers to the PHY */
|
/* Output MII registers to the PHY */
|
ethphy_mii_tx_d <= 0;
|
ethphy_mii_tx_d <= 0;
|
ethphy_mii_tx_en <= 0;
|
ethphy_mii_tx_en <= 0;
|
ethphy_mii_tx_err <= 0;
|
ethphy_mii_tx_err <= 0;
|
|
|
end
|
end
|
else
|
else
|
begin
|
begin
|
/* If fast_ethernet/100mbs we wait until the FIFO is full
|
/* If fast_ethernet/100mbs we wait until the FIFO is full
|
otherwise, we push out the byte each time we get one */
|
otherwise, we push out the byte each time we get one */
|
//if((!tx_fifo_empty && !fast_ethernet) ||
|
//if((!tx_fifo_empty && !fast_ethernet) ||
|
//(tx_fifo_full && fast_ethernet))
|
//(tx_fifo_full && fast_ethernet))
|
if (!tx_fifo_almost_empty)
|
if (!tx_fifo_almost_empty)
|
begin
|
begin
|
if(tx_byte_to_phy == 0)
|
if(tx_byte_to_phy == 0)
|
begin
|
begin
|
tx_byte_to_phy <= 1;
|
tx_byte_to_phy <= 1;
|
tx_fifo_pop <= 1;
|
tx_fifo_pop <= 1;
|
end
|
end
|
end
|
end
|
|
|
/* FIFO control loop */
|
/* FIFO control loop */
|
if (tx_byte_to_phy == 1)/* Output bits 3-0 (bottom nibble ) */
|
if (tx_byte_to_phy == 1)/* Output bits 3-0 (bottom nibble ) */
|
begin
|
begin
|
|
|
ethphy_mii_tx_en <= 1;
|
ethphy_mii_tx_en <= 1;
|
|
|
tx_fifo_pop <= 0;
|
tx_fifo_pop <= 0;
|
|
|
tx_byte_to_phy <= 2;
|
tx_byte_to_phy <= 2;
|
|
|
ethphy_mii_tx_d <= tx_fifo_q_dat[3:0];
|
ethphy_mii_tx_d <= tx_fifo_q_dat[3:0];
|
nib <= tx_fifo_q_dat[7:4];
|
nib <= tx_fifo_q_dat[7:4];
|
ethphy_mii_tx_err <= tx_fifo_q_err;
|
ethphy_mii_tx_err <= tx_fifo_q_err;
|
|
|
end
|
end
|
else if (tx_byte_to_phy == 2) /* Output bits 7-4 (top nibble) */
|
else if (tx_byte_to_phy == 2) /* Output bits 7-4 (top nibble) */
|
begin
|
begin
|
//ethphy_mii_tx_d <= tx_fifo_q_dat[7:4];
|
//ethphy_mii_tx_d <= tx_fifo_q_dat[7:4];
|
|
|
ethphy_mii_tx_d <= nib;
|
ethphy_mii_tx_d <= nib;
|
|
|
if(!tx_fifo_empty) /* Check if more in FIFO */
|
if(!tx_fifo_empty) /* Check if more in FIFO */
|
begin
|
begin
|
tx_fifo_pop <= 1;
|
tx_fifo_pop <= 1;
|
tx_byte_to_phy <= 1;
|
tx_byte_to_phy <= 1;
|
end
|
end
|
else /* Finish up */
|
else /* Finish up */
|
begin
|
begin
|
tx_byte_to_phy <= 3;
|
tx_byte_to_phy <= 3;
|
ethphy_mii_tx_en <= 0;
|
|
end
|
end
|
end
|
end
|
else if (tx_byte_to_phy == 3) /* De-assert TX_EN */
|
else if (tx_byte_to_phy == 3) /* De-assert TX_EN */
|
begin
|
begin
|
tx_byte_to_phy <= 2'b00;
|
tx_byte_to_phy <= 2'b00;
|
|
ethphy_mii_tx_en <= 0;
|
end
|
end
|
end // else: !if(!rst_n)
|
end // else: !if(!rst_n)
|
end // always @ (posedge ethphy_mii_tx_clk or negedge rst_n)
|
end // always @ (posedge ethphy_mii_tx_clk or negedge rst_n)
|
|
|
/* A fifo, storing TX bytes coming from the SMII interface */
|
/* A fifo, storing TX bytes coming from the SMII interface */
|
generic_fifo #(9, 64) tx_fifo
|
generic_fifo #(9, 64, 6) tx_fifo
|
(
|
(
|
// Outputs
|
// Outputs
|
.psh_full (tx_fifo_full),
|
.psh_full (tx_fifo_full),
|
.pop_q ({tx_fifo_q_err,tx_fifo_q_dat}),
|
.pop_q ({tx_fifo_q_err,tx_fifo_q_dat}),
|
.pop_empty (tx_fifo_empty),
|
.pop_empty (tx_fifo_empty),
|
.almost_empty (tx_fifo_almost_empty),
|
.almost_empty (tx_fifo_almost_empty),
|
// Inputs
|
// Inputs
|
.async_rst_n (rst_n),
|
.async_rst_n (rst_n),
|
.psh_clk (clk),
|
.psh_clk (clk),
|
.psh_we (tx_seqbits_copy),
|
.psh_we (tx_seqbits_copy),
|
.psh_d ({tx_er_seqbit_scratch,tx_data_byte_scratch}),
|
.psh_d ({tx_er_seqbit_scratch,tx_data_byte_scratch}),
|
.pop_clk (ethphy_mii_tx_clk),
|
.pop_clk (ethphy_mii_tx_clk),
|
.pop_re (tx_fifo_pop));
|
.pop_re (tx_fifo_pop));
|
|
|
|
|
//assign mcoll = mcrs & mtxen;
|
//assign mcoll = mcrs & mtxen;
|
|
|
endmodule // smii_top
|
endmodule // smii_top
|
|
|
|
|
|
|
/* Generic fifo - this is bad, should probably be done some other way */
|
/* Generic fifo - this is bad, should probably be done some other way */
|
module generic_fifo (async_rst_n, psh_clk, psh_we, psh_d, psh_full, pop_clk, pop_re, pop_q, pop_empty, almost_empty);
|
module generic_fifo (async_rst_n, psh_clk, psh_we, psh_d, psh_full, pop_clk, pop_re, pop_q, pop_empty, almost_empty);
|
|
|
parameter dw = 8;
|
parameter dw = 8;
|
parameter size = 16;
|
parameter size = 16;
|
parameter size_log_2 = 4;
|
parameter size_log_2 = 4;
|
|
|
/* Asynch. reset, active low */
|
/* Asynch. reset, active low */
|
input async_rst_n;
|
input async_rst_n;
|
|
|
/* Push side signals */
|
/* Push side signals */
|
input psh_clk;
|
input psh_clk;
|
input psh_we;
|
input psh_we;
|
input [dw-1:0] psh_d;
|
input [dw-1:0] psh_d;
|
output psh_full;
|
output psh_full;
|
|
|
/* Pop side signals */
|
/* Pop side signals */
|
input pop_clk;
|
input pop_clk;
|
input pop_re;
|
input pop_re;
|
//output reg [dw-1:0] pop_q;
|
//output reg [dw-1:0] pop_q;
|
output reg [dw-1:0] pop_q;
|
output reg [dw-1:0] pop_q;
|
output pop_empty;
|
output pop_empty;
|
output wire almost_empty;
|
output wire almost_empty;
|
|
|
|
integer i;
|
|
|
/* Actual FIFO memory */
|
/* Actual FIFO memory */
|
reg [dw-1:0] fifo_mem [0:size-1];
|
reg [dw-1:0] fifo_mem [0:size-1];
|
|
|
|
initial
|
|
begin
|
|
for (i=0;i<size;i=i+1)
|
|
begin
|
|
fifo_mem[i] = {dw{1'b0}};
|
|
end
|
|
end
|
|
|
|
|
/* FIFO position ptr regs */
|
/* FIFO position ptr regs */
|
reg [size_log_2 - 1 : 0 ] wr_ptr, rd_ptr, ctr;
|
reg [size_log_2 - 1 : 0 ] wr_ptr, rd_ptr, ctr;
|
|
|
integer i;
|
|
|
|
|
|
/* FIFO full signal for push side */
|
/* FIFO full signal for push side */
|
//assign psh_full = (ptr == size-1) ? 1 : 0;
|
//assign psh_full = (ptr == size-1) ? 1 : 0;
|
/* This full logic means we all but one slot in the FIFO */
|
/* This full logic means we all but one slot in the FIFO */
|
assign psh_full = ctr == size;
|
assign psh_full = ctr == size;
|
|
|
/* FIFO empty signal for pop side */
|
/* FIFO empty signal for pop side */
|
//assign pop_empty = (ptr == 0) ? 1 : 0;
|
//assign pop_empty = (ptr == 0) ? 1 : 0;
|
//assign pop_empty = ctr==0;
|
//assign pop_empty = ctr==0;
|
assign pop_empty = rd_ptr == wr_ptr;
|
assign pop_empty = rd_ptr == wr_ptr;
|
|
|
assign almost_empty = ctr < 2;
|
assign almost_empty = ctr < 16;
|
|
|
always @(posedge pop_re or negedge async_rst_n)
|
always @(posedge pop_re or negedge async_rst_n)
|
begin
|
begin
|
if (!async_rst_n)
|
if (!async_rst_n)
|
|
begin
|
rd_ptr <= 0;
|
rd_ptr <= 0;
|
|
pop_q <= 0;
|
|
end
|
else
|
else
|
begin
|
begin
|
pop_q = fifo_mem[rd_ptr];
|
if (!pop_empty)
|
rd_ptr <= rd_ptr + 1;
|
begin
|
|
pop_q <= fifo_mem[rd_ptr];
|
ctr <= ctr - 1;
|
ctr <= ctr - 1;
|
|
rd_ptr <= rd_ptr + 1;
|
|
end
|
|
|
end
|
end
|
end
|
end
|
|
|
always @(posedge psh_we or negedge async_rst_n)
|
always @(posedge psh_we or negedge async_rst_n)
|
begin
|
begin
|
if (!async_rst_n)
|
if (!async_rst_n)
|
begin
|
begin
|
for (i=0;i<size;i=i+1) fifo_mem[i] <= 0;
|
for (i=0;i<size;i=i+1) fifo_mem[i] <= 0;
|
wr_ptr <= 0;
|
wr_ptr <= 0;
|
ctr <= 0;
|
ctr <= 0;
|
end
|
end
|
else
|
else
|
begin
|
begin
|
fifo_mem[wr_ptr] <= psh_d;
|
fifo_mem[wr_ptr] <= psh_d;
|
wr_ptr <= #1 wr_ptr + 1;
|
wr_ptr <= #1 wr_ptr + 1;
|
ctr <= ctr + 1;
|
ctr <= ctr + 1;
|
end
|
end
|
end
|
end
|
|
|
|
|
endmodule // generic_fifo
|
endmodule // generic_fifo
|
|
|
|
|
No newline at end of file
|
No newline at end of file
|