#ifndef _BOARD_H_
|
#ifndef _BOARD_H_
|
#define _BOARD_H_
|
#define _BOARD_H_
|
|
|
#define IN_CLK 50000000 // Hz
|
#define IN_CLK 50000000 // Hz
|
|
|
//
|
//
|
// ROM bootloader
|
// ROM bootloader
|
//
|
//
|
// Uncomment the appropriate bootloader define. This will effect the bootrom.S
|
// Uncomment the appropriate bootloader define. This will effect the bootrom.S
|
// file, which is compiled and converted into Verilog for inclusion at
|
// file, which is compiled and converted into Verilog for inclusion at
|
// synthesis time. See bootloader/bootloader.S for details on each option.
|
// synthesis time. See bootloader/bootloader.S for details on each option.
|
|
|
#define BOOTROM_SPI_FLASH
|
//#define BOOTROM_SPI_FLASH
|
//#define BOOTROM_GOTO_RESET
|
#define BOOTROM_GOTO_RESET
|
//#define BOOTROM_LOOP_AT_ZERO
|
//#define BOOTROM_LOOP_AT_ZERO
|
//#define BOOTROM_LOOP_IN_ROM
|
//#define BOOTROM_LOOP_IN_ROM
|
|
|
// Address bootloader should start from in FLASH
|
// Address bootloader should start from in FLASH
|
// Last 256KB of 2MB flash - offset 0x1c0000 (2MB-256KB)
|
// Last 256KB of 2MB flash - offset 0x1c0000 (2MB-256KB)
|
#define BOOTROM_ADDR_BYTE2 0x1c
|
#define BOOTROM_ADDR_BYTE2 0x1c
|
#define BOOTROM_ADDR_BYTE1 0x00
|
#define BOOTROM_ADDR_BYTE1 0x00
|
#define BOOTROM_ADDR_BYTE0 0x00
|
#define BOOTROM_ADDR_BYTE0 0x00
|
// Causes SPI bootloader to loop if SPI didn't give correct size of image
|
// Causes SPI bootloader to loop if SPI didn't give correct size of image
|
#define SPI_RETRY_IF_INSANE_SIZEWORD
|
#define SPI_RETRY_IF_INSANE_SIZEWORD
|
|
|
//
|
//
|
// Defines for each core (memory map base, OR1200 interrupt line number, etc.)
|
// Defines for each core (memory map base, OR1200 interrupt line number, etc.)
|
//
|
//
|
#define SDRAM_BASE 0x0
|
#define SDRAM_BASE 0x0
|
|
|
#define GPIO_0_BASE 0x91000000
|
#define GPIO_0_BASE 0x91000000
|
|
|
#define UART0_BASE 0x90000000
|
#define UART0_BASE 0x90000000
|
#define UART0_IRQ 2
|
#define UART0_IRQ 2
|
#define UART0_BAUD_RATE 115200
|
#define UART0_BAUD_RATE 115200
|
|
|
|
|
#define SPI0_BASE 0xb0000000
|
#define SPI0_BASE 0xb0000000
|
#define SPI0_IRQ 6
|
#define SPI0_IRQ 6
|
|
|
#define I2C_0_BASE 0xa0000000
|
#define I2C_0_BASE 0xa0000000
|
#define I2C_0_IRQ 10
|
#define I2C_0_IRQ 10
|
|
|
#define I2C_1_BASE 0xa1000000
|
#define I2C_1_BASE 0xa1000000
|
#define I2C_1_IRQ 11
|
#define I2C_1_IRQ 11
|
|
|
#define ETH0_BASE 0x92000000
|
#define ETH0_BASE 0x92000000
|
#define ETH0_IRQ 4
|
#define ETH0_IRQ 4
|
|
|
#define ETH_MACADDR0 0x00
|
#define ETH_MACADDR0 0x00
|
#define ETH_MACADDR1 0x12
|
#define ETH_MACADDR1 0x12
|
#define ETH_MACADDR2 0x34
|
#define ETH_MACADDR2 0x34
|
#define ETH_MACADDR3 0x56
|
#define ETH_MACADDR3 0x56
|
#define ETH_MACADDR4 0x78
|
#define ETH_MACADDR4 0x78
|
#define ETH_MACADDR5 0x9a
|
#define ETH_MACADDR5 0x9a
|
|
|
//
|
//
|
// OR1200 tick timer period define
|
// OR1200 tick timer period define
|
//
|
//
|
#define TICKS_PER_SEC 100
|
#define TICKS_PER_SEC 100
|
|
|
#endif
|
#endif
|
|
|
